Stability-indicating RP-HPLC method for the quantitative analysis of perindopril erbumine in tablet dosage form

Perindopril erbumine-entrapped ultradeformable liposomes alleviate sarcopenia via effective skin delivery in muscle atrophy mouse model

Sarcopenia is a pertinent challenge in the super-aged societies causing reduced functional performance, poor quality of life and increased morbidity. In this study, the potential of perindopril erbumine-loaded ultradeformable liposomes (PE-UDLs) against sarcopenia was investigated. PE-UDLs were prepared by thin-film hydration and extrusion method using egg yolk phosphatidylcholine (EPC) as a lipid bilayer former and Tween 80 or sodium deoxycholate as an edge activator. Owing to the smallest particle size (75.0 nm) and the highest deformability (54.2) and entrapment efficiency (35.7 %), PE-UDLs with EPC to Tween 80 ratio of 8:2 was selected as the optimized formulation. The optimized PE-UDLs showed substantially higher cumulative amount of drug permeated and permeation rate across the rat skin compared to PE solution (485.7 vs. 50.1 µg and 13.4 vs. 2.3 µg/cm2/h, respectively). Topically applied PE-UDLs successfully ameliorated the effects of lipopolysaccharide (LPS)-induced sarcopenia in mice by improving body weight changes, grip strength and muscle weight. Furthermore, PE-UDLs reduced the shrinkage of muscle fibers as demonstrated by higher cross-sectional area than PE solution. PE-UDLs also increased the expression of myosin heavy chain (MHC) protein and reduced the expression of muscle atrophy F-box (Atrogin-1) and muscle ring-finger protein-1 (MuRF1), thereby improving muscles atrophy. In conclusion, these results demonstrate the therapeutic potential of PE-UDLs against sarcopenia.

Four ecofriendly spectrophotometric methods for the determination of perindopril through derivatization with sulphophtalein dyes: application to tablet analysis

Nowadays, there is a need to expand the bank of spectrophotometric methods for the determination of perindopril in dosage forms for the purposes of routine pharmaceutical analysis, which would be simple, express, «green» and inexpensive. In the present work, perindopril in tablets was quantified via a direct simple, «green», and non-extracting spectrophotometric approach based on the formation of ion-pair complexes with sulphophtalein dyes. The absorbances of the colored reaction products were registered at 405 nm (bromocresol green, BCG), 397 nm (bromocresol purple, BCP, and bromothymol blue, BTB) and 598 nm (bromophenol blue, BPB). To achieve the highest intensity of absorbance, optimum conditions were established by the screening of many experimental factors such as optimal concentration and volume of dyes, and the time consumed for the reaction. Beer's law was obeyed in the ranges of 0.44-3.96 µg/mL (BCG), 3.00-7.00 µg/mL (BCP), 4.00-12.00 µg/mL (BTB) and 0.44-3.52 µg/mL (BPB). All four methods were validated in accordance with ICH guidelines, confirming specificity and linearity, accuracy and precision, limits of detection and quantification, robustness. These validated methods provide a reliable and green approach for the quantitative analysis of perindopril in tablets, contributing to safer and more sustainable laboratory practices in pharmaceutical analysis.

Three techniques for the determination of perindopril through derivatization with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole

In addition to its pure form, three accurate, rapid, and simple methods have been established for determining perindopril (PRD) in its tablet form. At pH 9.0 using a borate buffer, developing the three designated methods was successful according to the reaction between PRD and 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole (NBD-Cl) and the formation of a chromogen (with a yellow color) measurable at 460 nm using the spectrophotometric method (Method I). In addition, the produced chromogen was assessed using the spectrofluorimetric method (Method II) at 535 nm following excitation at 461 nm. Afterward, the same reaction product was separated and determined using the HPLC method with fluorescence detection (Method III). A Promosil C₁₈ stainless steel column (Q7 5 mm particle size, 250-4.6 mm) has proven suitable for separation. The mobile phase adjustment was made at pH 3.0, with a 1.0 mL min ^-1 flow rate; its composition was methanol-sodium dihydrogen phosphate, 0.02 M (60: 40, v/v). Through concentration ranges of 5.0-60.0, 0.5-6.0, and 1.0-10.0 μg mL^-1, the calibration curves were rectilinear for Methods I, II, and III, respectively, with limits of quantification (LOQ) of 1.08, 0.16 and 0.19 μg mL^-1 as well as limits of detection (LOD) of 0.36, 0.05 and 0.06 μg mL^-1. The developed methods were implemented to estimate PRD in tablets, and a comparison between the obtained outcomes utilizing the developed methods as well as obtained from the official method revealed that they were comparable. The official BP method was based on dissolving PRD in anhydrous acetic acid and titrating with 0.1 M perchloric acid, then the potentiometric determination of the end-point. The designated methods were also implemented in content uniformity testing with satisfying results. The reaction pathway proposal was speculated, and according to ICH Guidelines, the statistical evaluation of the data was performed. The three proposed methods were confirmed to be green, eco-friendly and safe to environment using Green Analytical procedure index (GAPI) method.

Advanced chemometric methods as powerful tools for impurity profiling of drug substances and drug products: Application on bisoprolol and perindopril binary mixture

Impurity profiling has a rising importance nowadays due to the increased health problems associated with impurities and degradation products found in several drug substances and formulations. Three advanced, accurate and precise chemometric methods were developed as impurity profiling methods for a mixture of bisoprolol fumarate (BIS) and perindopril arginine (PER) with their degradation products which represent drug impurity or a precursor to such impurity. The methods applied were Partial Least Squares (PLS-1), Multivariate Curve Resolution-Alternating Least Squares (MCR-ALS) and Artificial Neural Networks (ANN). Genetic Algorithm (GA) was used as a variable selection tool to select the most significant wavelengths for the three chemometric models. For proper analysis, a 5-factor 5-level experimental design was used to establish a calibration set of 25 mixtures containing different ratios of the drugs and their degradation products (impurities). The validity of the proposed methods was assessed using an independent validation set. The designed models were able to predict the concentrations of the drugs and the degradation products/impurities in the validation set and pharmaceutical formulation. The proposed methods presented a powerful alternative to traditional and expensive chromatographic methods as impurity profiling tools.

Stability-Indicating RP-HPLC and CE Methods for Simultaneous Determination of Bisoprolol and Perindopril in Pharmaceutical Formulation: A Comparative Study

Two fast, accurate and selective stability-indicating methods were developed and validated for the simultaneous determination of bisoprolol, perindopril and three of their possible degradation products. The first proposed method was a gradient reversed phase-high-performance liquid chromatography (HPLC) method, whereas the second was a capillary electrophoresis method. The structures of the obtained degradation products were elucidated using infrared and mass spectrometry. They were also confirmed to be either a drug impurity in the British Pharmacopoeia or a precursor to such impurity. The linearity for bisoprolol and perindopril was achieved in the range of 1-20 μg mL-1 and 5-30 μg mL-1 for HPLC and capillary electrophoresis methods, respectively. The proposed methods were validated according to the International Conference on Harmonisation guidelines. The HPLC method proved to be more sensitive and succeeded in the quantitative determination of the obtained degradation products. Also, it was able to quantify perindopril impurity up to three times lower than the desired limit set by the British Pharmacopoeia. They were successfully employed in the determination of bisoprolol and perindopril in their combined pharmaceutical formulation.

Simultaneous quantification of related substances of perindopril tert-butylamine using a novel stability indicating liquid chromatographic method

A novel stability indicating gradient reverse-phased high-performance liquid chromatographic method has been developed for the quantification of impurities of perindopril tert-butylamine (PER) in pharmaceutical dosage form. Separation of the active substance and its known (Impurities B, C, D, E, F) and unknown impurities was achieved on a BDS Hypersil C18 column (250 mm × 4.6 mm, 5 µm), thermostated at 70°C, using a mobile phase comprised of aqueous solution of sodium 1-heptanesulfonate adjusted to pH 2 with perchloric acid and acetonitrile. The flow rate was maintained at 1.5 mL min(-1), injection volume of 20 µL was utilized and detection of analytes was performed at 215 nm. The developed method was validated in accordance with current ICH Guidelines for all suggested parameters, including forced degradation studies and proved to be linear, accurate, precise and suitable for the impurity testing of PER, being subsequently applied during on-going stability studies of a newly developed generic formulation.

The Development and Validation of a Stability-Indicating UHPLC-DAD Method for Determination of Perindopril l-Arginine in Bulk Substance and Pharmaceutical Dosage Form

A stability-indicating ultra-high-performance liquid chromatography (UHPLC) method with a diode array detector was developed and validated for the determination of cis/trans isomers of perindopril l-arginine in bulk substance and pharmaceutical dosage form. The separation was achieved on a Poroshell 120 Hilic (4.6 × 150 mm, 2.7 µm) column using a mobile phase composed of acetonitrile-0.1 % formic acid (20:80 v/v) at a flow rate of 1 mL min-1. The injection volume was 5.0 µL and the wavelength of detection was controlled at 230 nm. The selectivity of the UHPLC-DAD method was confirmed by determining perindopril l-arginine in the presence of degradation products formed during acid-base hydrolysis and oxidation as well as degradation in the solid state, at an increased relative air humidity and in dry air. The method's linearity was investigated in the ranges 0.40-1.40 µg mL-1 for isomer I and 0.40-2.40 µg mL-1 for isomer II of perindopril l-arginine. The UHPLC-DAD method met the precision and accuracy criteria for the determination of the isomers of perindopril l-arginine. The limits of detection and quantitation were 0.1503 and 0.4555 µg mL-1 for isomer I and 0.0356 and 0.1078 µg mL-1 for isomer II, respectively.