Cloud Point Extraction in the Determination of Drugs in Biological Matrices

How does the order of sample analysis influence the matrix effect during LC-MS bioanalysis?

Mass spectrometry coupled with liquid chromatography is a valuable tool for drug development and personalised drug therapy. The matrix effect is caused by enhancing or suppressing the analyte signal intensity by the interfering compounds of biological fluids. The matrix effect may influence the reliability of the quantitative results. Thus, its evaluation is a critical part of bioanalytical method validation. Identified factors affecting the matrix effect are the physicochemical properties of the analyte, type of biological material, analytical conditions, the ion source construction and calculation method. The order of analysis of test samples (pure solutions and post-extraction spiked samples) is another factor possibly affecting quantifying the matrix effect variability between sources. Our primary goal was to find which experimental design - interleaved or set of blocks - is more sensitive to detect matrix effect variability. Additionally, to better understand the reason of variability, we evaluated the influence of chromatographic elution and the type of plasma (normal, lipemic or hemolyzed), co-elution, and carry-over of phospholipids. We used chemometric methods: Principal Component Analysis and Partial Least-Squares Discriminant Analysis. Although a comparable (but statistically different) matrix effect (%RSDMF) is observed using the interleaved and block schemes, for some compounds, the order of the samples strongly influences the results. The interleaved scheme was generally more sensitive in detecting the matrix effect than the block scheme. Thus, reporting the order of samples is needed to ensure the repeatability of experiments. Chemometrics suggests that lipemic samples analyzed in isocratic conditions are most prone to the matrix effect. Different compositions of matrix lots of the same type - especially lipemic - may influence method reliability. Thus, evaluating more than one source of lipemic and hemolyzed plasma is recommended.

The Chemometric Evaluation of the Factors Influencing Cloud Point Extraction for Fluoroquinolones

This study aimed to analyze the factors that impact the cloud point extraction of ciprofloxacin, levofloxacin, and moxifloxacin. The following independent variables were analyzed: Triton X-114 concentration, NaCl concentration, pH, and incubation temperature. The dependent variable studied was recovery. A central composite design model was used. The applied quantitation method was HPLC. The method was validated for linearity, precision, and accuracy. The results underwent ANOVA^® analysis. The polynomial equations were generated for each analyte. The response surface methodology graphs visualized them. The analysis showed that the factor most affecting the recovery of levofloxacin is the concentration of Triton X-114, while the recovery of ciprofloxacin and moxifloxacin is most affected by pH value. However, the concentration of Triton X-114 also plays an important role. The optimization resulted in the following recoveries: for ciprofloxacin, 60%; for levofloxacin, 75%; and for moxifloxacin, 84%, which are identical to those estimated with regression equations-59%, 74% and 81% for ciprofloxacin, levofloxacin, and moxifloxacin, respectively. The research confirms the validity of using the model to analyze factors affecting the recovery of the analyzed compounds. The model allows for a thorough analysis of variables and their optimization.

Diuretics in Different Samples: Update on the Pretreatment and Analysis Techniques

Diuretics are drugs that promote the excretion of water and electrolytes in the body and produce diuretic effects. Clinically, they are often used in the treatment of edema caused by various reasons and hypertension. In sports, diuretics are banned by the World Anti-Doping Agency (WADA). Therefore, in order to monitor blood drug concentration, identify drug quality and maintain the fairness of sports competition, accurate, rapid, highly selective and sensitive detection methods are essential. This review provides a comprehensive summary of the pretreatment and detection of diuretics in various samples since 2015. Commonly used techniques to extract diuretics include liquid-liquid extraction, liquid-phase microextraction, solid-phase extraction, solid-phase microextraction, among others. Determination methods include methods based on liquid chromatography, fluorescent spectroscopy, electrochemical sensor method, capillary electrophoresis and so on. The advantages and disadvantages of various pretreatment and analytical techniques are elaborated. In addition, future development prospects of these techniques are discussed.

Current development of bioanalytical sample preparation techniques in pharmaceuticals

Sample preparation is considered as the bottleneck step in bioanalysis because each biological matrix has its own unique challenges and complexity. Competent sample preparation to extract the desired analytes and remove redundant components is a crucial step in each bioanalytical approach. The matrix effect is a key hurdle in bioanalytical sample preparation, which has gained extensive consideration. Novel sample preparation techniques have advantages over classical techniques in terms of accuracy, automation, ease of sample preparation, storage, and shipment and have become increasingly popular over the past decade. Our objective is to provide a broad outline of current developments in various bioanalytical sample preparation techniques in chromatographic and spectroscopic examinations. In addition, how these techniques have gained considerable attention over the past decade in bioanalytical research is mentioned with preferred examples. Modern trends in bioanalytical sample preparation techniques, including sorbent-based microextraction techniques, are primarily emphasized.

•

Bioanalytical sampling techniques are described with suitable applications in pharmaceuticals.

•

The pros and cons of each bioanalytical sampling techniques are described.

•

Relevant biological matrices are outlined.

Exploring the utility of Au@PVP-polyamide-Triton X-114 for SERS tracking of extracellular senescence associated-beta-galactosidase activity

A compound with enrichment and SERS enhancement was successfully developed, which could rapidly adsorb X-gal hydrolysates from a liquid matrix in 5 minutes and further be used for SERS analysis with a detection limit of less than 1 × 10-9 mol L-1. This novel strategy will facilitate the development of an analytical approach for cellular senescence.

Magnetic Core-Shell Molecularly Imprinted Nano-Conjugates for Extraction of Antazoline and Hydroxyantazoline from Human Plasma-Material Characterization, Theoretical Analysis and Pharmacokinetics

The aim of this study was to develop magnetic molecularly imprinted nano-conjugate sorbent for effective dispersive solid phase extraction of antazoline (ANT) and its metabolite, hydroxyantazoline (ANT-OH) in analytical method employing liquid chromatography coupled with mass spectrometry method. The core–shell material was characterized in terms of adsorption properties, morphology and structure. The heterogeneous population of adsorption sites towards ANT-OH was characterized by two K_d and two B_max values: K_d (1) = 0.319 µg L⁻¹ and B_max (1) = 0.240 μg g⁻¹, and K_d (2) = 34.6 µg L⁻¹ and B_max (2) = 5.82 μg g⁻¹. The elemental composition of magnetic sorbent was as follows: 17.55, 37.33, 9.14, 34.94 wt% for Si, C, Fe and O, respectively. The extraction protocol was optimized, and the obtained results were explained using theoretical analysis. Finally, the analytical method was validated prior to application to pharmacokinetic study in which the ANT was administrated intravenously to three healthy volunteers. The results prove that the novel sorbent could be useful in extraction of ANT and ANT-OH from human plasma and that the analytical strategy could be a versatile tool to explain a potential and pharmacological activity of ANT and ANT-OH.

Simultaneous extraction and analysis of clozapine and lorazepam from human plasma using dual solvent-stir bar microextraction with different acceptor phases followed by high-performance liquid chromatography ultra-violet detection

A new design of dual solvent stir bar microextraction (DSSBME) was developed and combined with HPLC-UV for the simultaneous extraction of clozapine (CLZ) and lorazepam (LRP) from human plasma with different acceptor phases. Two short hollow fibers immobilized with an organic extraction solvent were used as the solvent bars for microextraction of CLZ and LRP from the sample solution. The solvent bars were fixed with a staple pin which served as the stirrer. The target analytes were simultaneously and selectively extracted from the sample solution into their corresponding solvent bar. Extraction parameters such as organic solvent type, pH of the sample solution, the acceptor phase concentration, salt incorporation into the solution, stirring rate, and extraction time were optimized to achieve the best extraction results. Under the optimum conditions (1-undecanol as extraction solvent, pH of sample solution = 9.0, 10% w/v NaCl, concentration of HCl = 10 mM, concentration of NaOH = 100 mM, stirring rate of 1400 rpm and extraction time of 30 min at ambient temperature) the limit of detection for CLZ was 0.4 ng mL^-1 and for LRP it was 1.1 ng mL^-1. The linear range for CLZ was 1.3-1000.0 ng mL^-1 (R² = 0.9991) and for LRP it was 3.6-800.0 ng mL^-1 (R² = 0.9993). Extraction recovery and the enrichment factor for CLZ were 95.4% and 343 and for LRP they were 74.3% and 263, respectively. Finally, the method developed was successfully applied for the simultaneous determination of CLZ and LRP in human plasma samples.

Determination of Antidepressants in Human Plasma by Modified Cloud-Point Extraction Coupled with Mass Spectrometry

Cloud-point extraction (CPE) is rarely combined with liquid chromatography coupled to mass spectrometry (LC-MS) in drug determination due to the matrix effect (ME). However, we have recently shown that ME is not a limiting factor in CPE. Low extraction efficiency may be improved by salt addition, but none of the salts used in CPE are suitable for LC-MS. It is the first time that the influences of a volatile salt-ammonium acetate (AA)-on the CPE extraction efficiency and ME have been studied. Our modification of CPE included also the use of ethanol instead of acetonitrile to reduce the sample viscosity and make the method more environmentally friendly. We developed and validated CPE-LC-MS for the simultaneous determination of 21 antidepressants in plasma that can be useful for clinical and forensic toxicology. The selected parameters included Triton X-114 concentration (1.5 and 6%, w/v), concentration of AA (0, 10, 20 and 30%, w/v), and pH (3.5, 6.8 and 10.2). The addition of 10% of AA increased recovery twice. For 20 and 30% (w/v) of AA, three phases were formed that prolonged the extraction process. The developed CPE method (6% Triton X-114, 10% AA, pH 10.2) was successfully validated through LC-MS/MS simultaneous determination of 21 antidepressants in human plasma. The linearity was in the range of 10-750 ng/mL (r2 > 0.990).

Recent advances of green pretreatment techniques for quality control of natural products

A few advancing technologies for natural product analysis have been widely proposed, which focus on decreasing energy consumption and developing an environmentally sustainable manner. These green sample pretreatment and analysis methods following the green Analytical Chemistry (GAC) criteria have the advantage of improving the strategy of chemical analyses, promoting sustainable development to analytical laboratories, and reducing the negative effects of analysis experiments on the environment. A few minimized extraction methodologies have been proposed for replacing the traditional methods in the quality evaluation of natural products, mainly including solid-phase microextraction (SPME) and liquid phase microextraction (LPME). These procedures not only have no need for large numbers of samples and toxic reagent, but also spend a small amount of extraction and analytical time. This overview aims to list out the main green strategies on the application of quality evaluation and control for natural products in the past 3 years.