Hemifacial microsomia: a scoping review on progressive facial asymmetry due to mandibular deformity

PURPOSE

This scoping review explores various parameters of the mandible in progressive facial asymmetry (FA) in hemifacial microsomia (HFM) patients, highlighting its relationship with sex, population, and age group.

METHODS

The review was based on a comprehensive search of PubMed, EBSCOhost, and Web of Science. Eligible studies that met the inclusion criteria form part of the selection study. The included studies were appraised using screening and quantitative criteria of mixed-method appraisal tools. The authors utilised a pre-set data extraction form to obtain information from the included studies.

RESULTS

Eleven studies met the inclusion criteria. The mandible parameters used were angular measurements, chin point, ramal height, body length, and total length. There was no relationship between FA and sex in HFM patients in the included studies. Most of the studies were comprised of European participants (55%), followed by Americans (36%) and Chinese (9%). The age groups included in the selected studies were categorised as dentition age (18%), early-to-middle childhood (18%), and varied ages (64%). The data presented in this review only pertains to the anomalous characteristics recorded on the affected side in HFM patients. No concomitant control data was recorded in this review.

CONCLUSION

An assessment of the included studies revealed that FA does not increase with age in HFM. Hence, FA is non-progressive in HFM patients. This information is relevant to diagnosing and managing HFM patients. More reports are needed on the progression of FA in HFM patients.

Quantification of facial symmetry in orthognathic surgery: A novel approach integrating 3D contour maps and hyper-dimensional computing

This study aimed to enhance the evaluation of facial symmetry crucial for planning and assessing outcomes of orthognathic surgery (OGS). An innovative approach combining three-dimensional (3D) facial contour lines with hyperdimensional (HD) computing was developed for this purpose. Data were collected using 3D cone beam computed tomography (CBCT) at Chang Gung Memorial Hospital from 2016 to 2021. A comprehensive dataset was compiled, including images from 150 normal individuals and 2500 patients, totaling 5150 preoperative and postoperative facial images. A machine learning model was trained to analyze these images, and 3D contour data were used to create a facial symmetry quantification system with HD computing. Additionally, 3D CBCT data from 200 patients before and after OGS were retrospectively reviewed for clinical application. The developed facial symmetry algorithm demonstrated an overall accuracy of 84.1 %. Postoperative facial symmetry scores improved significantly, with a mean score increase of 53 %, from 2.40 to 3.63. The study culminated in the creation of a web-based system that leverages HD computing and 3D contour mapping to automate facial symmetry assessment. This system offers a user-friendly interface for rapid and accurate evaluations, facilitating better communication between clinicians and patients.

Cross-Sectional Study on Self-Perception of Dento-Facial Asymmetry

Background and Objectives: Facial symmetry is a key component of facial beauty and attractiveness. However, perfect symmetry is rare, and slight asymmetries, also known as natural asymmetries, are common and contribute to the uniqueness of each face. The perception of facial asymmetry varies among individuals and can be influenced by several factors. This study aimed to investigate the self-perception of dento-facial asymmetry among a sample of Romanian individuals, focusing on their awareness, the extent to which it bothers them, and their desire for correction. Materials and Methods: A cross-sectional analytical study was conducted with 283 participants from Romania between January and February 2024. Participants completed a questionnaire designed to assess their self-perception of facial asymmetry and socio-demographic characteristics. The questionnaire included 10 questions on self-perception of facial asymmetry and 8 questions on socio-demographic data. Statistical analysis was performed using SPSS 26.0, and the Pearson Chi-square test was used for comparative analysis. Results: The sample was predominantly female (75.3%) with an average age of 32.24 years. Most participants were from urban areas (80.6%) and had university degrees (58.7%). About 28.7% of participants observed facial asymmetry, with dental asymmetry being the most frequently reported, followed by asymmetries in the eyebrows and eyelids. The right side of the face was more commonly perceived as asymmetric. Although 24.4% of participants were bothered by their asymmetry, 39.2% expressed a desire to correct it. Conclusions: One-third of participants identified dento-facial asymmetry, with the dental level being the most reported. A significant portion of participants expressed a desire to correct their asymmetries, highlighting the importance of understanding self-perception in the context of facial aesthetics. This study underscores the subjective nature of facial asymmetry perception and the varying thresholds for what is considered bothersome or in need of correction.

Prevalence of mandibular asymmetries in the pediatric population of Jazan: A radiographic analytical study

Background

Facial asymmetry results from variation in mandibular linear and angular dimensions on the right and left sides of the face. Mandibular asymmetry is of great significance to oral surgeons and orthodontists as it directly impacts the facial profile of an individual.

Aim

The present study aimed to measure the prevalence of mandibular asymmetry and its fluctuations during the mixed dentition growth phase in healthy children aged 6-8 years in the Jazan region of Saudi Arabia.

Method

This retrospective observational study was conducted by measuring linear asymmetrical measurements of mandible on orthopantomograms of 390 healthy children (182 boys and 208 girls, aged 6-8 years) with mixed dentition. Linear measurements from orthopantomograms were obtained using a standardized digitizer. Two sets of mandibular measurements were recorded, alongside subjective assessments of mandibular first molar development. An independent t-test was employed to assess the significance between measurements on both sides, while one-way ANOVA was used to demonstrate facial asymmetry significance among different age groups.

Result

The result of this study revealed a significant statistical difference (p-value≤ 0.05) for both sides of the mandible across two dimensions: condylar and ramus height (p value = 0.03) and mandibular length (p value = 0.04). The asymmetry index resulted in no asymmetry among most of the included subjects. However, compared to the other three linear measurements, many seven-year-old participants possess mandibular asymmetry on condylar height (54.5 %).

Conclusion

Within the limitation it could be concluded that children in growing age have a significant mandibular asymmetry (mainly 7 years), which, however, is only seldom clinically significant. Hence, treatment plan should be cautiously planned.

Facial asymmetry of the hard and soft tissues in skeletal Class I, II, and III patients

To investigate and compare the facial asymmetry (hard and soft tissues) among skeletal Class I, II, and III patients. A total of 221 subjects, including skeletal Class I (n = 80), skeletal Class II (n = 75), and skeletal Class III (n = 66), were included in the study. CBCT, 22 skeletal landmarks, and 10 soft tissue landmarks were used for the measurements and the asymmetry index was calculated to assess the facial asymmetry. Statistical analyses included one-way ANOVA, Kruskal-Wallis test, and Spearman correlation analysis. The skeletal Class III patients presented greater asymmetry than Class II patients for 10 hard tissue landmarks and 3 soft tissue landmarks (p < 0.05). High correlation of asymmetry was found between four soft tissue landmarks and their corresponding skeletal landmarks (rs ≥ 0.71), as well as Me and ANS (r > 0.86). The ANS and Me in 21.3% patients deviated to contralateral sides. The skeletal Class III patients had more facial asymmetry than the Class II patients. Soft tissues showed similar asymmetry as the underlying hard tissues rather than a compensation of the hard tissue asymmetry. The inconsistency in the deviation of Me and ANS may exacerbate facial asymmetry.

Skeletal facial asymmetry: reliability of manual and artificial intelligence-driven analysis

OBJECTIVES

To compare artificial intelligence (AI)-driven web-based platform and manual measurements for analysing facial asymmetry in craniofacial CT examinations.

METHODS

The study included 95 craniofacial CT scans from patients aged 18-30 years. The degree of asymmetry was measured based on AI platform-predefined anatomical landmarks: sella (S), condylion (Co), anterior nasal spine (ANS), and menton (Me). The concordance between the results of automatic asymmetry reports and manual linear 3D measurements was calculated. The asymmetry rate (AR) indicator was determined for both automatic and manual measurements, and the concordance between them was calculated. The repeatability of manual measurements in 20 randomly selected subjects was assessed. The concordance of measurements of quantitative variables was assessed with interclass correlation coefficient (ICC) according to the Shrout and Fleiss classification.

RESULTS

Erroneous AI tracings were found in 16.8% of cases, reducing the analysed cases to 79. The agreement between automatic and manual asymmetry measurements was very low (ICC < 0.3). A lack of agreement between AI and manual AR analysis (ICC type 3 = 0) was found. The repeatability of manual measurements and AR calculations showed excellent correlation (ICC type 2 > 0.947).

CONCLUSIONS

The results indicate that the rate of tracing errors and lack of agreement with manual AR analysis make it impossible to use the tested AI platform to assess the degree of facial asymmetry.

Mineralization and thickness of the condylar cortex in skeletal remains of children's mandibles: A preliminary study

OBJECTIVE

To explore the relationship between the volumetric bone mineral density (vBMD), the thickness of the condylar cortex (Tcortex) and the hemimandibular volumes (Vhemimandible) of symmetrical and asymmetrical mandibles of children.

DESIGN

The data collection consisted of 92 archeological skeletal remains of children's mandibles between 1 and 12 years old. The mandibles were digitalized with a computed tomography (CT) scan, and three dimensional models were obtained. Vhemimandible was calculated using the optimal symmetry plane. The volumes were used to calculate the asymmetry index (AI). Mandibles with an AI of ≥ 3% (N = 9) and a sample of the most symmetrical mandibles (N = 9) were selected for this research. Three groups were created: a symmetrical, an asymmetrical and a pooled group. Micro-CT was used to measure the vBMD and Tcortex in four volumes of interest. The AI was calculated for these parameters as well.

RESULTS

Significant correlations were found between the vBMD and the Tcortex in the pooled group (P < .01) and between the AI of the vBMD and the AI of the Tcortex in the pooled (P < .01) and symmetrical group (P < .05). No significant correlations were found between the vBMD and the Vhemimandible and between the respective AIs. Between the Tcortex and the Vhemimandible a significant correlation was found in the pooled and asymmetrical group.

CONCLUSION

There is a relationship between the vBMD and the Tcortex. The correlations between the Tcortex and the Vhemimandible are insufficient to draw firm conclusions. A relationship between the vBMD and Vhemimandible was not confirmed in this study.

Facial Asymmetry-Demystifying the Entity

Introduction/Background

Perfect facial symmetry has always been considered a hallmark of beauty, but, is almost elusive in nature. However, clinically evident skeletal facial asymmetry on the other hand is quite common, which can result from congenital deformities, developmental abnormalities, secondary to maxillofacial trauma and it is an entity maxillofacial surgeons deal with on a regular basis. Surgical correction of facial asymmetry is challenging, as it not only involves the correction of the skeletal asymmetry for an aesthetic outcome, but, also the improvement of the soft tissue drape and dental occlusal harmony. This results in rehabilitation of functional components of orofacial complex like speech, deglutition and phonation.

Objective

With this paper, we intend to throw a light on this challenging aspect of maxillofacial surgery, along with giving the next generation of maxillofacial surgeons a direction to explore the topic further.

Conclusion

Meticulous evaluation and diagnosis of the patient's problems with latest diagnostic methods like 3-dimensional imaging and surgical treatment with orthognathic surgery, gap arthroplasty or distraction osteogenesis, utilizing cutting edge 3-D virtual planning will result in better outcomes.This review will collate the information available in the literature, along with the authors' recommendations for better planning and execution of this challenging puzzle of facial asymmetry.

Evaluation of mandibular osseous structure in patients with mandibular asymmetry: a fractal analysis study

OBJECTIVE

We evaluated the effect of mandibular asymmetry on the trabecular structure of the mandible as measured through fractal analysis (FA).

STUDY DESIGN

We divided a sample of 105 patients with skeletal class I occlusion, cervical vertebral maturation CS6, and skeletal vertical dimension ratios within normal limits into right asymmetric, left asymmetric, and symmetric groups. We performed FA on 6 bilateral regions of interest on panoramic radiographs of the patients and calculated the mean fractal dimension (FD) for each region. We performed the Wilcoxon signed-rank and paired t tests to compare the significance of differences in FD between sides within each group and between groups for all regions. Statistical significance was established at P < .05.

RESULTS

We found statistically significant differences in mean FD values between the right and left condyles of the 2 asymmetric patient groups. The FD was greater in the left condyle of patients with right asymmetry and in the right condyle of patients with left asymmetry. The right condyle had a significantly greater FD in left asymmetric patients than in right asymmetric patients.

CONCLUSIONS

The results of FA indicate that asymmetry is characterized by an increase in the mean FD of the condyle that is responsible for the asymmetry. Fractal analysis can be a valuable diagnostic technique in distinguishing trabecular differences in the condylar areas of asymmetric individuals.

Comparison of the asymmetry index determined on digital panoramic radiographic images and on posteroanterior cephalometric images: a retrospective cross-sectional study

OBJECTIVE

The purpose of this study was to compare the asymmetry index determined on digital panoramic radiographic (PR) images and posteroanterior cephalometric (PACR) images.

METHODS

This study included 100 patients whose PR and PACR images were registered in a database. Condylar height, ramus height, and condylar height plus ramus height measurements were measured bilaterally. Condylar asymmetry, ramus asymmetry, and total asymmetry were evaluated.

RESULTS

There was a statistically significant difference between the right and left side for all measurements when evaluated on the PR and also on the PACR images (p < 0.01). When calculating the asymmetry index, the resulting condylar asymmetry and ramus asymmetry values did not show significant differences between PR and PACR images. On the other hand, only the presence of total asymmetry showed a statistically significant difference between techniques (p = 0.013).

CONCLUSION

Asymmetry indices can be reliably obtained from both PR and PACR images.

Skeletal structure of asymmetric mandibular prognathism and retrognathism

BACKGROUND

This study aimed to compare the skeletal structures between mandibular prognathism and retrognathism among patients with facial asymmetry.

RESULTS

Patients who had mandibular asymmetry with retrognathism (Group A) in The Netherlands were compared with those with deviated mandibular prognathism (Group B) in Korea. All the data were obtained from 3D-reformatted cone-beam computed tomography images from each institute. The right and left condylar heads were located more posteriorly, inferiorly, and medially in Group B than in Group A. The deviated side of Group A and the contralateral side of Group B showed similar condylar width and height, ramus-proper height, and ramus height. Interestingly, there were no inter-group differences in the ramus-proper heights. Asymmetric mandibular body length was the most significantly correlated with chin asymmetry in retrognathic asymmetry patients whereas asymmetric elongation of condylar process was the most important factor for chin asymmetry in deviated mandibular prognathism.

CONCLUSION

Considering the 3D positional difference of gonion and large individual variations of frontal ramal inclination, significant structural deformation in deviated mandibular prognathism need to be considered in asymmetric prognathism patients. Therefore, Individually planned surgical procedures that also correct the malpositioning of the mandibular ramus are recommended especially in patients with asymmetric prognathism.

Influence of age and diet consistency on the oral muscle pressure of orthodontically treated and untreated subjects with normal occlusion and comparison of their 3D facial shape

OBJECTIVES

(1) To investigate the effect of age and diet consistency on maximum lips, tongue and cheek pressure of orthodontically treated and untreated subjects with normal, Class I dental occlusion, (2) to find out whether there is a muscle imbalance between anterior tongue and lip pressure in the same subjects at different ages and (3) to compare the 3D facial shape of treated and untreated individuals.

MATERIAL AND METHODS

Subjects with normal occlusion were prospectively grouped into orthodontically treated/untreated and in children/adolescents/adults. Iowa Oral Performance Instrument was used to record the maximum muscle pressure. Two-way ANOVA and Tukey post hoc test analysed age-specific differences in muscle pressure. Two-way ANCOVA analysed the effect of diet consistency on muscle pressure. Lips and tongue imbalance was analysed using z-scores and 3D faces using a generalized Procrustes analysis.

RESULTS

One hundred thirty-five orthodontically untreated and 114 treated participants were included. Muscle pressure was found to increase with age in both groups, except for the tongue in treated subjects. No differences in the balance between lips and tongue muscle pressure were found, but a higher cheek pressure in untreated adults (p<0.05) was observed. 3D facial shapes showed subtle differences. Untreated subjects with soft diet consistency showed lower lip pressure (p<0.05).

CONCLUSION

Oral muscle pressure of orthodontically treated patients without relapse does not differ from that of untreated patients with Class-I occlusion.

CLINICAL RELEVANCE

This study provides normative lip, tongue and cheek muscle pressure in subjects with normal occlusion, which can be used for diagnosis, treatment planning and stability.

Normal variation of mandibular asymmetry in children

OBJECTIVE

To explore the normal variation of asymmetry in mandibles of children in the age group of 1 to 12 years.

MATERIALS AND METHODS

The study group consisted of 92 cadaveric mandibles of children with a dental age of 1 to 12 years old in possession of ACTA (Academic Centre for Dentistry Amsterdam), Faculty of Dentistry, the Netherlands. 3D models of the mandibles were obtained from CT-scans and hemimandibular volumes of all mandibles were calculated. The condylar height, ramus height, mandibular body length and the gonial angle were bilaterally determined using a novel landmark-based method, and the degree of asymmetry was calculated.

RESULTS

No relationship was found between dental age and asymmetry of the studied parameters (P < .05). The highest degree of asymmetry was found in the ramus height, whereas the gonial angle presented the lowest degree of asymmetry. A positive correlation was found between the asymmetry of the hemimandibular volume vs the height of the ramus (P < .05) and the length of the mandibular body (P < .05). An inverse correlation was found between the asymmetry of the ramus height vs the condylar height (P < .05), mandibular body length (P < .05) and gonial angle (P < .05).

CONCLUSIONS

Mandibular asymmetries in children did occur (9.8% of the included mandibles presented with a relevant overall asymmetry of ≥3%) and were unrelated to age. The different segments of the mandible seem to compensate for each other, in order to maintain a functional equilibrium.

Three-Dimensional Distance Mapping Method to Evaluate Mandibular Symmetry and Morphology of Adults with Unilateral Premolar Scissors Bite

(1) Objective: This study aimed to evaluate the association between unilateral premolar scissors bite and mandibular symmetry of adults via the 3D distance mapping method. (2) Methods: A total of 53 cone-beam computed tomography (CBCT) images of adults with unilateral premolar scissors bite were set as study samples. A total of 53 age- and sex-matched samples without scissors bite were in the control group. Three-dimensional mandibular models and seven mandibular functional units, including condylar process (Co), coronoid process (Cr), mandibular ramus (Ra), mandibular angle (Ma), alveolar process (Ap), mandibular body (Mb), and chin process (Ch) were constructed and mirrored. After superimposition of the original and the mirrored models, 3D distance maps and deviation analysis were performed to evaluate the mandibular symmetry and morphology. (3) Results: In the study group, the matching percentages of the entire mandible (50.79 ± 10.38%), Ap (67.00 ± 12.68%), Mb (66.62 ± 9.44%), Ra (62.52 ± 11.00%), Ch (80.75 ± 9.86%), and Co (62.78 ± 13.56) were lower than that of the entire mandible (58.60 ± 5.52) (p < 0.01), Ap (73.83 ± 8.88%) (p < 0.01), Mb (72.37 ± 8.69%) (p < 0.01), Ra (68.60 ± 7.56%) (p < 0.01), Ch (85.23 ± 6.80%) (p < 0.01), and Co (67.58 ± 10.32%) (p < 0.05) in the control group. However, Cr and Ma showed no significant difference (p > 0.05). (4) Conclusions: The 3D distance mapping method provided a qualitative and quantitative mandibular symmetry and morphology assessment. Mandibular asymmetry was found in adults with unilateral premolar scissors bites. Mandibular functional units, including the alveolar process, mandibular body, mandibular ramus, chin process, and condylar process, showed significant differences, while no significant difference was observed in the coronoid process and mandibular angle.

Facial Asymmetry Detected with 3D Methods in Orthodontics: A Systematic Review

Background:

Historically, the development of two-dimensional (2D) imaging techniquesforerun that of three-dimensional (3D) ones. Some 2D methods are still considered valid and effective to diagnose facial asymmetry but 3D techniques may provide more precise and accurate measurements.

Objective:

The aim of this work is to analyze the accuracy and reliability of the imaging techniques available for the diagnosis of facial asymmetry in orthodontics and find the most reliable.

Methods:

A search strategy was implemented using PubMed (National Library of Medicine, NCBI).

Results:

A total of 3201 papers were identified in electronic searches. 90 articles, available in full text, were included in the qualitative synthesis consisting of 8 reviews on the diagnosis of facial asymmetry, 22 in vivo and in vitro studies on 2D methods and 60 in vivo and in vitro studies on 3D methods to quantify the asymmetry.

Conclusion:

2D techniques include X-ray techniques such as posterior-anterior cephalogram, which still represents the first level exam in the diagnosis of facial asymmetry. 3D techniques represent the second level exam in the diagnosis of facial asymmetry. The most current used techniques are CBCT, stereophotogrammetry, laser scanning, 3D optical sensors and contact digitization. The comparison between bilateral parameters (linear distances, angles, areas, volumes and contours) and the calculation of an asymmetry index represent the best choices for clinicians who use CBCT. The creation of a color-coded distance map seems to represent the most accurate, reliable and validated methods for clinicians who use stereophotogrammetry, laser scanning and 3D optical sensors.

Biomechanical evaluation of the unilateral crossbite on the asymmetrical development of the craniofacial complex. A mechano-morphological approach

BACKGROUND AND OBJECTIVE

The occlusion effect on the craniofacial development is a controversial topic that has attracted the interest of many researchers but that remains unclear, mainly due to the difficulties on measure its mechanical response experimentally. This mechano-morphological relationship of the craniofacial growth is often explained by the periosteal and capsular matrices of the functional matrix hypothesis (FMH); however, its outcomes have not been analytically demonstrated yet. This computational study aims, therefore, to analytically demonstrate the mechano-morphological relationship in the craniofacial development of children with unilateral crossbite (UXB) using the finite element (FE) method.

METHODS

The craniofacial complex asymmetry of ten children, five of whom exhibit UXB, was 3D-analysed and compared with the biomechanical response computed from a FE analysis of each patient's occlusion. Due to the complexity of the geometry and the multitude of contacts involved, the inherent limitations of the model were evaluated by comparing computed occlusal patterns with those recorded by an occlusal analysis on 3D printed copies.

RESULTS

Comparison's outcomes proved the reliability of our models with just a deviation error below 6% between both approaches. Out of validation process, computational results showed that the significant elongation of mandibular branch in the contralateral side could be related to the mandibular shift and increase of thickness on the crossed side, and particularly of the posterior region. These morphological changes could be associated with periodontal overpressure (>4.7 kPa) and mandibular over deformation (0.002 ε) in that side, in agreement with the periosteal matrix's principles. Furthermore, the maxilla's transversal narrowing and the elevation of the maxillary and zygomatic regions on the crossed side were statistically demonstrated and seem to be related with their respective micro displacements at occlusion, as accounted by their specific capsule matrices. Our results were consistent with those reported clinically and demonstrated analytically the mechano-morphological relationship of children's craniofacial development based on the FMH's functional matrices.

CONCLUSIONS

This study is a first step in the understanding of the occlusion's effect on the craniofacial development by computational methods. Our approach could help future engineers, researchers and clinicians to understand better the aetiology of some dental malocclusions and functional disorders improve the diagnosis or even predict the craniofacial development.

Evaluation of Mandibular Growth and Symmetry in Child with Congenital Zygomatic-Coronoid Ankylosis

Ankyloses in the area of the temporomandibular joint (TMJ) are mentioned as a potential etiological factor of mandibular growth disorders and facial asymmetry. The aim of this case study was to evaluate the changes in the mandible of a child with zygomatic-coronoid ankylosis during the first five years of life, in which two adhesion release procedures were performed. The adopted symmetrical approach is based on the assumption of symmetry of the structure of the stomatognathic system in relation to the sagittal median plane. However, the assessment of pathological changes in the structure of the skeletal system was performed using an asymmetrical approach. Computed tomography techniques and a system of computer-aided diagnosis (CAD) were used in the case study. During the child’s growth, linear and angular measurements were made thrice (at the age of 16, 25 and 54 months). The degree of asymmetry was estimated in the measurements made on the right and left sides of the three-dimensional mandible. Unilateral congenital hypoplasia of the articular process and zygomatic-coronoid adhesion caused asymmetrical growth of the mandible in the child along with shortening of the mandibular branch and body on the damaged side and a visible difference in the size of the mandibular angles. Removal of the adhesions during surgical procedures made it possible to reduce the asymmetry of the mandible and catch-up growth, although at the age of five, the mandible was still smaller than the mandible in healthy peers. It was shown that the early adhesion release procedures supported by the CAD analysis enabled the restoration of mandibular symmetry.

Analysis of hard tissue facial symmetry after unilateral mandibular reconstruction

Background

This study aimed to determine how successful reconstruction of the mandible can recover the symmetry.

Materials and methods

All patients who underwent surgical treatment for unilateral mandibular reconstruction in 4 years were retrospectively examined. Bilateral differences of gonion (GO) positions were measured in 3 dimensions based on immediate postoperative computed tomography. The data collected was analyzed in 3 ways: First, the comparison of bilateral differences of GO in 3 dimensions. Second, the mean Asymmetry Index in control subjects was used to divide all cases into three groups: “Symmetry,” “Asymmetry,” and “Marked asymmetry.” Third, “maximum normal asymmetry” was calculated, and all cases were categorized as below and above maximum normal asymmetry. The difference between two gonial angles was used to determine the amount of asymmetry.

Results

Forty-seven patients and 47 normal adults were enrolled. The mean bilateral GO difference in the control group was higher than in the study group patients, but it was not statistically significant. The mean Asymmetry Index for the control group was not also significantly higher than the study cases. The study group was “Symmetric” in 78.7% of the cases whereas the control group in 91.4%, 19.1% of the study group and 8.5% of controls were “Asymmetric,” and 2.1% of study cases and 0% of controls were “Markedly Asymmetric.” Maximum normal asymmetry was 82.9% in the study group and 97.8% in the control group. The mean differences between the right and left gonial angles were higher in the study group, but it was not significant (P = 0.1).

Conclusions

Our study’s results showed that bilateral symmetry in mandibular reconstruction patients was satisfactory and similar to the normal individuals.

On construction of transfer learning for facial symmetry assessment before and after orthognathic surgery

Orthognathic surgery (OGS) is frequently used to correct facial deformities associated with skeletal malocclusion and facial asymmetry. An accurate evaluation of facial symmetry is a critical for precise surgical planning and the execution of OGS. However, no facial symmetry scoring standard is available. Typically, orthodontists or physicians simply judge facial symmetry. Therefore, maintaining accuracy is difficult. We propose a convolutional neural network with a transfer learning approach for facial symmetry assessment based on 3-dimensional (3D) features to assist physicians in enhancing medical treatments. We trained a new model to score facial symmetry using transfer learning. Cone-beam computed tomography scans in 3D were transformed into contour maps that preserved 3D characteristics. We used various data preprocessing and amplification methods to determine the optimal results. The original data were enlarged by 100 times. We compared the quality of the four models in our experiment, and the neural network architecture was used in the analysis to import the pretraining model. We also increased the number of layers, and the classification layer was fully connected. We input random deformation data during training and dropout to prevent the model from overfitting. In our experimental results, the Xception model and the constant data amplification approach achieved an accuracy rate of 90%.

Evaluation of facial symmetry after jaw reconstruction surgery

The current study proposes a 3D objective method of evaluating facial symmetry after reconstructive surgery of orofacial structures. 3D models of the craniofacial and soft tissue surfaces were reflected about the mid-sagittal plane. The original model was aligned with the reflection and the best plane of symmetry was found. A deviation contour map quantified the areas of asymmetry and gave a global score of the asymmetry. The asymmetry scores were successfully obtained for 18 patients who had underwent reconstruction of lower face. The asymmetry values at craniofacial and soft tissue levels were moderately correlated (R2=0.39). Overall, the developed method effectively highlights areas of asymmetry and can help evaluate aesthetic outcomes of facial reconstruction surgery.

The relations between the stress in temporomandibular joints and the deviated distances for mandibular asymmetric patients

The study aimed to compare the difference of stress distributions in temporomandibular joints (TMJs) between the patients with mandibular asymmetry and asymptomatic subjects and find the relations between deviated distance and biomechanical stress using three-dimensional finite element method, to give guidance to dentists for correction of mandibular asymmetry. Ten facial symmetric subjects without symptoms of temporomandibular disorders (TMD) and 10 mandibular asymmetric patients were recruited and assigned as the Control and Case group respectively. The FE models of the mandible and maxilla were reconstructed from cone-beam computed tomography (CBCT) images. Muscle forces and boundary conditions were applied to the two groups corresponding to centric and anterior occlusions. The simulation manifested significant differences in stresses of the TMJs between the non-deviated and deviated sides in the Case group under the centric and anterior occlusions. The stresses in the Case group were significantly greater than those in the Control group, especially on the non-deviated side. Besides, there were weak and moderate correlations between the third principal stresses and deviated distances for the patients under centric and anterior occlusions. The excessive stresses in the TMJ of patients with mandibular asymmetry were associated with temporomandibular disorders.

Mandibular ramus height and condyle distance asymmetries in individuals with different facial growth patterns: a cone-beam computed tomography study

PURPOSE

This study aimed to quantify mandibular ramus height and condylar distances asymmetry indexes in adult patients with different vertical facial growth pattern using Cone Beam computed tomography (CBCT).

METHODS

An observational cross-sectional study was conducted by using CBCT of 159 patients (mean age 26.36 ± 5.32 years). Vistadent 3D^® software was used to determine the facial pattern in 3 groups (N = 53): hypodivergent, normodivergent and hyperdivergent-by Ricketts VERT index. Mandibular ramus height and the condylar linear distance in relation to the median sagittal plane were evaluated. The asymmetry index was calculated considering the right and left sides. Data were analyzed by generalized linear models and Tukey post-hoc test (α = 0.05).

RESULTS

Significantly lower values were found for the left and right mandibular ramus height in the hyperdivergent skeletal pattern (P < 0.05). There was no statistically significant difference for condylar and intercondylar distances among the facial groups (P > 0.05). Asymmetry indexes (mandibular ramus height and condylar distance) were similar, and no statistically significant differences were found among the skeletal patterns. In most subjects, the severity of mandibular ramus height asymmetry varied from light to not clinically significant independently of the facial type.

CONCLUSION

The findings suggest that vertical facial growth pattern not affected the asymmetry index of mandibular ramus height and the intercondylar distance. The results also demonstrated significantly shorter mandibular ramus height for the hyperdivergent skeletal pattern individuals.

Comparison of maxillomandibular asymmetries in adult patients presenting different sagittal jaw relationships

OBJECTIVE

The present study aims at using cone beam computed tomography (CBCT) to analyze the maxillomandibular characteristics present in adults with mandibular asymmetries and different sagittal jaw relationships.

METHODS

360 patients were selected and divided into three groups (Class I, Class II, and Class III), with 120 individuals per group. The groups were then subdivided according to the intensity of lateral deviation of the gnathion point, into: 1) relative symmetry, 2) moderate asymmetry, and 3) severe asymmetry. Three planes of reference were established in the CBCT images and several measurements were taken to compare the bilateral skeletal differences between the intensities of asymmetry for the different sagittal jaw relationships.

RESULTS

When the groups were compared by the intensity of asymmetry, significant differences among patients with relative symmetry and moderate to severe asymmetry were found. This was especially noticed for severe asymmetry, suggesting that the deviation of the chin did not constitute the only morphological alteration for these patients, especially because a series of measurements showed significant bilateral differences. When comparing sagittal jaw relationships, the only significant finding was the vertical positioning of the gonion between Class II and III patients with severe asymmetry.

CONCLUSIONS

When comparing the three sagittal jaw relationships with the same intensity of asymmetry, most maxillofacial aspects were quite similar. The only difference was found for patients with severe asymmetry, as the individuals with Class II showed greater bilateral difference in the vertical positioning of the gonion, when compared to patients with Class III.

[Orthognathic surgery of mandibular asymmetry: which results can we expect with and without chin wing? A cohort out of 51 cases]

INTRODUCTION

The aim of this retrospective cohort is to evaluate the amount of postsurgical correction of soft and hard tissues in patients with mandibular asymmetries and to compare the results with and without surgery of the lower mandibular contour (chin wing…).

MATERIAL AND METHOD

Mandibular asymmetries cases of three surgeons were systematically included. The angles of deviation of the chin, bi-commissural, bi-gonic and occlusal were measured on face photography and radiography. A pre and post-surgical comparison was performed and the amount of correction was analyzed via the Wilcoxon statistical test.

RESULTS

51 patients (44 women and 7 men) were included. After surgery, the correction is significant for all measurements with an improvement of 44 to 60% depending on the measured angles. No patient is normalized but the small initial mandibular asymmetries are the closest to normal after surgery. The correction of the bi-commissural angle is controlled without being optimal (60% correction). The difficulty remains the horizontalization of the bi-gonial plan which is only corrected at 45%. Patients with mandibular margin surgery (chin wing…) showed the greatest improvement in bi-gonial (p = 0.0142) and occlusal (p = 0.0154) angles.

CONCLUSION

If surgery allows a significant correction of facial dissymmetry, this is not complete. Surgical procedures on the lower edge of the mandible such as the chin wing could provide a better correction especially for bi-gonial and occlusal angles.

Comparação de diferentes planejamentos em cirurgia ortognática para tratamento de assimetrias faciais: relato de casos

Introdução: a cirurgia ortognática envolve a correção de desarmonias funcionais e estéticas. A hiperplasia condilar (HC) resulta em crescimento mandibular acentuado, provocando assimetria facial. Para obter previsibilidade e sucesso nos resultados, é imprescindível planejar. Objetivo: descrever e comparar métodos de planejamento e resultados pós-operatórios por meio de relato de três pacientes com assimetria facial. Relato de caso: foram avaliados 03 casos (casos A, B e C) orto-cirúrgicos de pacientes adultos jovens, com média de idade de 22 anos, portadores de má oclusão esquelética de Classe III, com assimetria facial resultante de HC inativa. Esses foram submetidos a análise facial e a dois métodos de planejamento em cirurgia ortognática (convencional e virtual). O caso A foi planejado por meio de imagens bidimensionais (2D) e sequência cirúrgica iniciada pela maxila. O caso B foi planejado por imagens 2D associado ao recurso de simulação em protótipo. E o caso C, planejado exclusivamente em imagens tridimensionais (3D) e simulação virtual. Os casos B e C utilizaram sequência cirúrgica iniciada pela mandíbula. Foi utilizado o software Dolphin Imaging® em todos os planejamentos. Os planejamentos foram transferidos para os procedimentos cirúrgicos por auxílio dos guias em resina acrílica e estereolitografia. Os pacientes dos casos relatados foram avaliados periodicamente no pós-operatório e estavam satisfeitos com os resultados. Conclusão: os planejamentos demonstraram previsibilidade e viabilidade para assimetrias faciais, pois os resultados foram satisfatórios. Houve uma tendência de melhores resultados quando a prototipagem, imagens 3D e sequência operatória iniciada pela mandíbula foram utilizadas no planejamento.

Mandibular asymmetries and associated factors in orthodontic and orthognathic surgery patients

OBJECTIVES

To estimate the prevalence of mandibular asymmetries in orthodontic and orthognathic surgery patients and to investigate demographic and skeletal factors associated with this disharmony.

MATERIALS AND METHODS

Cone-beam computed tomography images of 1178 individuals aged 19 through 60 years with complete dentitions were analyzed. Outcomes were classified as relative mandibular symmetry, moderate asymmetry, and severe asymmetry. Factors recorded included sex, age, side of mandibular deviation, sagittal jaw relationship, vertical skeletal pattern, angle of the cranial base, and maxillary asymmetry. Ordinal logistic regression was used to estimate simple and adjusted odds ratios (OR) for the individuals with moderate and severe mandibular asymmetry, as well as 95% confidence intervals.

RESULTS

Prevalence values of 55.2%, 27.2%, and 17.6% were observed for relative mandibular symmetry, moderate asymmetry, and severe asymmetry, respectively. An independent association with the side of mandibular deviation and the presence of maxillary asymmetry was observed, both for subjects with moderate mandibular asymmetry (left side: OR = 1.50; 95% CI: 1.01-2.24 / maxillary asymmetry: OR = 2.07; 95% CI: 1.11-3.76) and for those with severe asymmetry (left side: OR = 2.09; 95% CI: 1.27-3.44 / maxillary asymmetry: OR = 4.93; 95% CI: 2.64-9.20).

CONCLUSIONS

Moderate and severe mandibular asymmetries were present in 44.8% of the sample, being associated with the side of mandibular deviation and with maxillary asymmetry.

[Mandibular asymmetry: determination of a reliable skin measurement technique]

INTRODUCTION

Clinical measurements in the frontal view underevaluate chin deviation in mandibular asymmetry. The aim of this descriptive study is to search for a reliable method of measuring deviant chins using a facial X-ray as reference.

MATERIAL AND METHOD

Seventy patients with mandibular asymmetry who had consulted a maxillofacial surgeon were systematically included. Age, sex, cephalometric characteristics, reasons for patient consultation and type of surgery were collected. Two cephalometric methods were tested with respect to the medial sagittal plane (PSM) to compare the assessment of mandibular asymmetry on soft tissue and by cephalometry.

RESULTS

On average, the patients selected were young (26 years +/- 9), women (75% of cases), presented open bite (average FMA: 28° +/- 8°), a skeletal class III tendency, a left-side shift of the chin (63% of cases). They consulted for both aesthetic and functional reasons (51% of cases) and required bimaxillary surgery (66% of cases). Comparison between the photographic angle (formed by the PSM and the line passing through the nasion and reaching the chin point) and the radiographic angle (formed by the PSM and the line passing through the Crista Galli process and the bony chin point angle) showed no significant difference (p = 0.937) and is thus reliable.

Three-dimensional evaluation of craniofacial characteristics related to mandibular asymmetries in skeletal Class I patients

INTRODUCTION

Our objective was to analyze the characteristics that affect skeletal Class I adults with mandibular asymmetries using cone-beam computerized tomography.

METHODS

The sample included cone-beam computerized tomography images of 120 subjects. Asymmetry was determined by the deviation of gnathion from the midsagittal plane and classified as relative symmetry, moderate asymmetry, or severe asymmetry. Maxillary and mandibular measurements were made, and the differences between the contralateral side and the deviated side were evaluated, as well as the differences between the categories of asymmetry.

RESULTS

For patients with moderate asymmetry, there were significant differences between the contralateral and deviated sides for some measuments in the transverse and vertical planes. For those with severe asymmetry, statistically significant differences were found between the sides for all measurements, except for the measuments that evaluated the position of the mandibular condyle in the transverse and sagittal directions. Furthermore, a strong correlation was found in patients with severe asymmetry, between the deviation of the mandibular dental midline and the lateral displacement of gnathion.

CONCLUSIONS

Patients with relative symmetry had a bilateral balance, whereas those with moderate and severe asymmetries showed several skeletal imbalances. A great deviation of the mandibular dental midline may indicate severe skeletal asymmetry in Class I adults.

Three-dimensional assessment of facial asymmetry in preschool patients with orofacial clefts after neonatal cheiloplasty

OBJECTIVES

To evaluate facial asymmetry changes in pre-school patients with orofacial clefts after neonatal cheiloplasty and to compare facial asymmetry with age-matched healthy controls.

METHODS AND MATERIALS

The sample consisted of patients with unilateral cleft lip (UCL), unilateral cleft lip and palate (UCLP), and bilateral cleft lip and palate (BCLP). The patients were divided in two age groups with a mean age of 3 years (n = 51) and 4.5 years (n = 45), respectively, and 78 age-matched individuals as controls. Three-dimensional (3D) facial scans were analyzed using geometric morphometry and multivariate statistics.

RESULTS

Geometric morphometry showed positive deviations from perfect symmetry on the right side of the forehead in the intervention groups and the controls. The UCL groups showed the greatest asymmetric nasolabial area on the cleft-side labia and the contralateral nasal tip. The UCLP group showed, moreover, asymmetry in buccal region due to typical maxillar hypoplasia, which was accentuated in the older group. The BCLP groups showed slightly similar but greater asymmetry than the control groups, except for the philtrum region.

CONCLUSIONS

Asymmetry of each of the cleft groups significantly differed from the controls. Except for the buccal region in the UCLP and BCLP groups, asymmetry did not significantly increase with age.

Cone Beam Computed Tomographic Evaluation of Mandibular Asymmetry in Patients with Cleft Lip and Palate

Objective:

The purpose of the present study was to compare mandibular vertical asymmetry in patients with unilateral and bilateral cleft lip and palate and subjects with normal occlusion.

Materials and Methods:

Cone beam computed tomography scans of three groups consisting of 20 patients with unilateral cleft lip and palate, 20 patients affected by bilateral cleft lip and palate, and a control group of 20 subjects with normal occlusion were analyzed for this study. Condylar, ramal, and condylar plus ramal asymmetry indices were measured for all subjects using the method of Habets et al. Kruskal-Wallis and Mann-Whitney tests were used to determine any significant differences between the groups for all indices at the 95% level of confidence.

Results:

There were no significant differences regarding sex for all mandibular asymmetry indices in all three groups. All Asymmetry indices (condylar, ramal, and condylar plus ramal asymmetry) were significantly higher in the unilateral cleft group compared with the other two groups.

Conclusion:

Cone beam computed tomography images showed that patients with cleft lip and palate suffered from mandibular asymmetry. Subjects with unilateral cleft lip and palate had a more asymmetric mandible compared with the bilateral cleft lip and palate and control groups. Therefore, the mandible appears to be the leading factor in facial asymmetry in subjects with unilateral cleft lip and palate.

Is there an association between skeletal asymmetry and tooth absence?

Introduction:

Facial skeletal asymmetry is commonly found in humans and its main characteristic is menton deviation. The literature suggests that occlusal and masticatory problems arising from tooth absence could be related to the development of such asymmetries.

Objective:

The aim of this cross-sectional study was to estimate the prevalence of mandibular skeletal asymmetries and to investigate its association with posterior tooth absences.

Methods:

Tomographic images of 952 individuals aged from 18 to 75 years old were used. Asymmetry was the analyzed outcome, and it was categorized into three groups according to gnathion displacement in relation to the midsagittal plane (relative symmetry, moderate asymmetry, and severe asymmetry). Patients were sorted by the presence of all posterior teeth, unilateral posterior tooth absence, or bilateral posterior tooth absence. Chi-square test with a significance level of 5% was used to verify the association between posterior tooth absence and asymmetry.

Results:

Results show relative symmetry present in 55.3% of the sample, as well as the prevalence of 27.3% for moderate mandibular asymmetry and 17.4% for severe asymmetry. Moderate and severe mandibular asymmetries occurred in a higher proportion in patients with unilateral posterior tooth absence. However, there was no statistically significant difference between the analyzed groups (p = 0.691).

Conclusions:

In this study, mandibular asymmetries did not present any association with the absence of teeth on the posterior area of the arch.

Facial asymmetry: a current review

The term "asymmetry" is used to make reference to dissimilarity between homologous elements, altering the balance between structures. Facial asymmetry is common in the overall population and is often presented subclinically. Nevertheless, on occasion, significant facial asymmetry results not only in functional, but also esthetic issues. Under these conditions, its etiology should be carefully investigated in order to achieve an adequate treatment plan. Facial asymmetry assessment comprises patient's first interview, extra- as well as intraoral clinical examination, and supplementary imaging examination. Subsequent asymmetry treatment depends on patient's age, the etiology of the condition and on the degree of disharmony, and might include from asymmetrical orthodontic mechanics to orthognathic surgery. Thus, the present study aims at addressing important aspects to be considered by the orthodontist reaching an accurate diagnosis and treatment plan of facial asymmetry, in addition to reporting treatment of some patients carriers of such challenging disharmony.

Biological predictors of mandibular asymmetries in children with mixed dentition

OBJECTIVES

The objective was to investigate the severity of skeletal mandibular asymmetry in children with mixed dentition and other factors associated with asymmetry.

METHOD

The study was cross sectional, with stratified sampling according to malocclusion type consisting of 205 subjects with mixed dentition (median 10, interquartile range 9-11 years). There were 59 subjects presenting Class II/1, 77 Class II/2, and 69 Class III. The mandibular asymmetry has been estimated from orthopantomograms using the Habets' method and the dental maturation by Demirjian's method. The sagittal skeletal relationship and facial growth pattern were assessed from lateral cephalograms.

RESULTS

Asymmetries in general, were not rare and were more present in the condylar height rather than in the height of the ramus. The highest severity of condylar asymmetry was in Class II/2 subjects (median of asymmetry index 7.3; 64% subjects exhibiting moderate and severe asymmetry), while the Class III subjects exhibited the highest severity of both ramus and total height asymmetry (2.1; 13% and 2.0; 15%, respectively). Multiple logistic regression unveiled male gender as the only predictor of moderate or significant overall asymmetry. Dental age, the difference between dental and chronological age, and facial growth pattern were not significant predictors of asymmetries.

DISCUSSION

Overall, asymmetries in mixed dentition cannot be considered rare; however, no strong relationships between asymmetry and observed biological factors were found.

Mandibular asymmetry: a proposal of radiographic analysis with public domain software

Objective

This preliminary study aimed to propose a new analysis of digital panoramic radiographs for a differential diagnosis between functional and morphological mandibular asymmetry in children with and without unilateral posterior crossbite.

Methods

Analysis is based on linear and angular measurements taken from nine anatomic points, demarcated in sequence directly on digital images. A specific plug-in was developed as part of a larger public domain image processing software (ImageJ) to automate and facilitate measurements. Since panoramic radiographs are typically subject to magnification differences between the right and left sides, horizontal linear measurements were adjusted for greater accuracy in both sides by means of a Distortion Factor (DF). In order to provide a preliminary assessment of proposed analysis and the developed plug-in, radiographs of ten patients (5 with unilateral posterior crossbite and 5 with normal occlusion) were analyzed.

Results

Considerable divergence was found between the right and left sides in the measurements of mandibular length and position of condyles in patients with unilateral posterior crossbite in comparison to individuals with normal occlusion.

Conclusion

Although there are more effective and accurate diagnostic methods, panoramic radiography is still widespread, especially in emerging countries. This study presented initial evidence that the proposed analysis can be an important resource for planning early orthodontic intervention and, thus, avoid progression of asymmetries and their consequences.

An Animal Model for Inducing Deviation of the Mandible

PURPOSE

Altering the occlusal surface is still a common choice for inducing a deviated mandible in an animal model. Botulinum neurotoxin type A (BoTx/A) can block the action potential transmission in neuromuscular junctions by inhibiting acetylcholine release without damaging the nerves and muscle structures. Our present study was aimed at developing an easy-to-reproduce animal model of asymmetric mandibles in which injection of BoTx/A was applied.

MATERIALS AND METHODS

A total of 96 healthy 4-week-old male Sprague-Dawley rats were divided into 2 groups: an experimental group (n = 48) with BoTx/A injection and a control group (n = 48) with sterile saline injection at 4 sites of the right masseter muscle. Twelve rats from each group were humanely euthanized at weeks 1, 2, 3, and 4 for morphometric analysis using the micro-computed tomography (CT) findings.

RESULTS

The micro-CT scans revealed facial asymmetry in the experimental group, with no facial asymmetry in the control group after injection. Significant differences were found between the experimental and control groups regarding the indexes containing the mandibular length (length from condyle to menton, length from coronoid to menton, and length of mandibular corpus from gonion to menton) and ramus height (posterior border and middle region near coronoid, and height of anterior mandible at vertical distance from menton).

CONCLUSION

Our data have indicated that this deviated mandible animal model induced by injection of BoTx/A is highly reproducible and might be proved suitable for future studies of the asymmetric mandible.

Effects of early unilateral mandibular first molar extraction on condylar and ramal vertical asymmetry

Objective:

The objective of the following study is to investigate the mandibular vertical asymmetry in a group of patients with early unilateral mandibular first molar extractions.

Materials and Methods:

Mandibular asymmetry index measurements (condylar, ramal and condylar-plus-ramal) were performed on the panoramic radiographs of a study group including 51 patients (mean age: 18.60 ± 1.11 years) and a control group of 51 patients (mean age: 18.53 ± 1.29 years). Group I included patients with a unilateral mandibular first molar extracted before the age of 12 years. Group II included patients with no extractions and had excellent Class I relationships, no missing teeth and slight or moderate anterior crowding. A paired t-test was used to determine possible statistically significant differences between the sides for the measurements. Student's t-test was used for the comparison of asymmetry index values between the groups and genders.

Results:

No group showed statistically significant sex-or side-specific differences for posterior vertical height measurements. Condylar asymmetry index and ramal asymmetry index measurements were not statistically different between the groups, while condylar-plus-ramal asymmetry index (CRAI) measurements were statistically different between the groups (P = 0.019).

Conclusions:

A slight difference for CRAI value was found in patients with early unilateral mandibular first molar extractions.

Effects of early bilateral mandibular first molar extraction on condylar and ramal vertical asymmetry

OBJECTIVES

This study aims to investigate the mandibular vertical asymmetry in a group of adult patients who had early bilateral mandibular first molar extractions.

METHODS

Mandibular asymmetry index measurements (condylar, ramal, and condylar plus ramal) were made on the panoramic radiographs of a study group including 30 subjects (mean age, 18.22 ± 1.30 years) and a control group of 25 subjects (mean age, 18.24 ± 1.17 years). Group I comprised the control group patients with no extractions and had excellent class I relationships, no missing teeth, and slight or moderate anterior crowding. Group II included patients with a bilateral mandibular first molar teeth extracted before the age of 12 years. Student's t test was used for the comparison of asymmetry index values between the groups. A paired t test was used to determine possible statistically significant differences between the sides for condylar, ramal, and condylar plus ramal height measurements.

RESULTS

No group showed statistically significant side-specific differences for posterior vertical height measurements. Condylar asymmetry index (CAI), ramal asymmetry index, and condylar plus ramal asymmetry index measurements were not statistically different between the groups (p > 0.05).

CONCLUSIONS

CAI values were significantly high when compared with the 3 % threshold value in the both groups, but comparisons between the groups were not statistically significant.

CLINICAL RELEVANCE

This article investigates the effects of early bilateral mandibular molar teeth extraction that has never been investigated in the literature. The present study showed that the lengths of the condylar, ramal, and condylar plus ramal height were less in the study group than in a well-matched control group of without extraction.