Visualizing the solvent-inaccessible core of a group II intron ribozyme

Systematic detection of tertiary structural modules in large RNAs and RNP interfaces by Tb-seq

Compact RNA structural motifs control many aspects of gene expression, but we lack methods for finding these structures in the vast expanse of multi-kilobase RNAs. To adopt specific 3-D shapes, many RNA modules must compress their RNA backbones together, bringing negatively charged phosphates into close proximity. This is often accomplished by recruiting multivalent cations (usually Mg2+), which stabilize these sites and neutralize regions of local negative charge. Coordinated lanthanide ions, such as terbium (III) (Tb3+), can also be recruited to these sites, where they induce efficient RNA cleavage, thereby revealing compact RNA 3-D modules. Until now, Tb3+ cleavage sites were monitored via low-throughput biochemical methods only applicable to small RNAs. Here we present Tb-seq, a high-throughput sequencing method for detecting compact tertiary structures in large RNAs. Tb-seq detects sharp backbone turns found in RNA tertiary structures and RNP interfaces, providing a way to scan transcriptomes for stable structural modules and potential riboregulatory motifs.

The Chloroplast Trans-Splicing RNA-Protein Supercomplex from the Green Alga Chlamydomonas reinhardtii

In eukaryotes, RNA trans-splicing is a significant RNA modification process for the end-to-end ligation of exons from separately transcribed primary transcripts to generate mature mRNA. So far, three different categories of RNA trans-splicing have been found in organisms within a diverse range. Here, we review trans-splicing of discontinuous group II introns, which occurs in chloroplasts and mitochondria of lower eukaryotes and plants. We discuss the origin of intronic sequences and the evolutionary relationship between chloroplast ribonucleoprotein complexes and the nuclear spliceosome. Finally, we focus on the ribonucleoprotein supercomplex involved in trans-splicing of chloroplast group II introns from the green alga Chlamydomonas reinhardtii. This complex has been well characterized genetically and biochemically, resulting in a detailed picture of the chloroplast ribonucleoprotein supercomplex. This information contributes substantially to our understanding of the function of RNA-processing machineries and might provide a blueprint for other splicing complexes involved in trans- as well as cis-splicing of organellar intron RNAs.

The molecular structure of long non-coding RNAs: emerging patterns and functional implications

Long non-coding RNAs (lncRNAs) are recently-discovered transcripts that regulate vital cellular processes and are crucially connected to diseases. Despite their unprecedented molecular complexity, it is emerging that lncRNAs possess distinct structural motifs. Remarkably, the 3D shape and topology of full-length, native lncRNAs have been visualized for the first time in the last year. These studies reveal that lncRNA structures dictate lncRNA functions. Here, we review experimentally determined lncRNA structures and emphasize that lncRNA structural characterization requires synergistic integration of computational, biochemical and biophysical approaches. Based on these emerging paradigms, we discuss how to overcome the challenges posed by the complex molecular architecture of lncRNAs, with the goal of obtaining a detailed understanding of lncRNA functions and molecular mechanisms in the future.

Conserved Pseudoknots in lncRNA MEG3 Are Essential for Stimulation of the p53 Pathway

Long non-coding RNAs (lncRNAs) are key regulatory molecules, but unlike with other RNAs, the direct link between their tertiary structure motifs and their function has proven elusive. Here we report structural and functional studies of human maternally expressed gene 3 (MEG3), a tumor suppressor lncRNA that modulates the p53 response. We found that, in an evolutionary conserved region of MEG3, two distal motifs interact by base complementarity to form alternative, mutually exclusive pseudoknot structures ("kissing loops"). Mutations that disrupt these interactions impair MEG3-dependent p53 stimulation in vivo and disrupt MEG3 folding in vitro. These findings provide mechanistic insights into regulation of the p53 pathway by MEG3 and reveal how conserved motifs of tertiary structure can regulate lncRNA biological function.

Group II Intron Self-Splicing

Group II introns are large, autocatalytic ribozymes that catalyze RNA splicing and retrotransposition. Splicing by group II introns plays a major role in the metabolism of plants, fungi, and yeast and contributes to genetic variation in many bacteria. Group II introns have played a major role in genome evolution, as they are likely progenitors of spliceosomal introns, retroelements, and other machinery that controls genetic variation and stability. The structure and catalytic mechanism of group II introns have recently been elucidated through a combination of genetics, chemical biology, solution biochemistry, and crystallography. These studies reveal a dynamic machine that cycles progressively through multiple conformations as it stimulates the various stages of splicing. A central active site, containing a reactive metal ion cluster, catalyzes both steps of self-splicing. These studies provide insights into RNA structure, folding, and catalysis, as they raise new questions about the behavior of RNA machines.

Sequence-Specific Post-Synthetic Oligonucleotide Labeling for Single-Molecule Fluorescence Applications

The sequence-specific fluorescence labeling of nucleic acids is a prerequisite for various methods including single-molecule Förster resonance energy transfer (smFRET) for the detailed study of nucleic acid folding and function. Such nucleic acid derivatives are commonly obtained by solid-phase methods; however, yields decrease rapidly with increasing length and restrict the practicability of this approach for long strands. Here, we report a new labeling strategy for the postsynthetic incorporation of a bioorthogonal group into single stranded regions of both DNA and RNA of unrestricted length. A 12-alkyne-etheno-adenine modification is sequence-selectively formed using DNA-templated synthesis, followed by conjugation of the fluorophore Cy3 via a copper-catalyzed azide-alkyne cycloaddition (CuAAC). Evaluation of the labeled strands in smFRET measurements shows that the strategy developed here has the potential to be used for the study of long functional nucleic acids by (single-molecule) fluorescence or other methods. To prove the universal use of the method, its application was successfully extended to the labeling of a short RNA single strand. As a proof-of-concept, also the labeling of a large RNA molecule in form of a 633 nucleotide long construct derived from the Saccharomyces cerevisiae group II intron Sc.ai5γ was performed, and covalent attachment of the Cy3 fluorophore was shown with gel electrophoresis.

Strategy for Internal Labeling of Large RNAs with Minimal Perturbation by Using Fluorescent PNA

Fluorescence techniques for the investigation of biomolecules and their folding pathways require an efficient labeling strategy. A common method to internally label large RNAs involves the introduction of long loops for hybridization of fluorophore-carrying DNA strands. Such loops often disturb the structure, and thus the functionality, of the RNA. Here we show, in a proof of concept study with a >600 nucleotide group II intron ribozyme, that the usage of the nucleic acid analogue peptide nucleic acid (PNA) is more efficient in several aspects, minimizing the required structural modifications of the RNA. We demonstrate by various methods, including smFRET, that much smaller concentrations and shorter PNAs can be applied, compared to DNA, for rapid and specific internal RNA labeling. The folding pathway and catalytic activity of this large ribozyme is only minimally affected by the PNA, but the background signal is significantly reduced.

Looking at LncRNAs with the ribozyme toolkit

A diverse population of large RNA molecules controls every aspect of cellular function, and yet we know very little about their molecular structures. However, robust technologies developed for visualizing ribozymes and riboswitches, together with new approaches for mapping RNA inside cells, provide the foundation for visualizing the structures of long noncoding RNAs, mRNAs, and viral RNAs, thereby facilitating new mechanistic insights.

Quaternary arrangement of an active, native group II intron ribonucleoprotein complex revealed by small-angle X-ray scattering

The stable ribonucleoprotein (RNP) complex formed between the Lactococcus lactis group II intron and its self-encoded LtrA protein is essential for the intron's genetic mobility. In this study, we report the biochemical, compositional, hydrodynamic and structural properties of active group II intron RNP particles (+A) isolated from its native host using a novel purification scheme. We employed small-angle X-ray scattering to determine the structural properties of these particles as they exist in solution. Using sucrose as a contrasting agent, we derived a two-phase quaternary model of the protein-RNA complex. This approach revealed that the spatial properties of the complex are largely defined by the RNA component, with the protein dimer located near the center of mass. A transfer RNA fusion engineered into domain II of the intron provided a distinct landmark consistent with this interpretation. Comparison of the derived +A RNP shape with that of the previously reported precursor intron (ΔA) particle extends previous findings that the loosely packed precursor RNP undergoes a dramatic conformational change as it compacts into its active form. Our results provide insights into the quaternary arrangement of these RNP complexes in solution, an important step to understanding the transition of the group II intron from the precursor to a species fully active for DNA invasion.

Visualizing the ai5γ group IIB intron

It has become apparent that much of cellular metabolism is controlled by large well-folded noncoding RNA molecules. In addition to crystallographic approaches, computational methods are needed for visualizing the 3D structure of large RNAs. Here, we modeled the molecular structure of the ai5γ group IIB intron from yeast using the crystal structure of a bacterial group IIC homolog. This was accomplished by adapting strategies for homology and de novo modeling, and creating a new computational tool for RNA refinement. The resulting model was validated experimentally using a combination of structure-guided mutagenesis and RNA structure probing. The model provides major insights into the mechanism and regulation of splicing, such as the position of the branch-site before and after the second step of splicing, and the location of subdomains that control target specificity, underscoring the feasibility of modeling large functional RNA molecules.

RNAiFOLD: a constraint programming algorithm for RNA inverse folding and molecular design

Synthetic biology is a rapidly emerging discipline with long-term ramifications that range from single-molecule detection within cells to the creation of synthetic genomes and novel life forms. Truly phenomenal results have been obtained by pioneering groups--for instance, the combinatorial synthesis of genetic networks, genome synthesis using BioBricks, and hybridization chain reaction (HCR), in which stable DNA monomers assemble only upon exposure to a target DNA fragment, biomolecular self-assembly pathways, etc. Such work strongly suggests that nanotechnology and synthetic biology together seem poised to constitute the most transformative development of the 21st century. In this paper, we present a Constraint Programming (CP) approach to solve the RNA inverse folding problem. Given a target RNA secondary structure, we determine an RNA sequence which folds into the target structure; i.e. whose minimum free energy structure is the target structure. Our approach represents a step forward in RNA design--we produce the first complete RNA inverse folding approach which allows for the specification of a wide range of design constraints. We also introduce a Large Neighborhood Search approach which allows us to tackle larger instances at the cost of losing completeness, while retaining the advantages of meeting design constraints (motif, GC-content, etc.). Results demonstrate that our software, RNAiFold, performs as well or better than all state-of-the-art approaches; nevertheless, our approach is unique in terms of completeness, flexibility, and the support of various design constraints. The algorithms presented in this paper are publicly available via the interactive webserver http://bioinformatics.bc.edu/clotelab/RNAiFold; additionally, the source code can be downloaded from that site.

RNA catalysis as a probe for chaperone activity of DEAD-box helicases

DEAD-box proteins are vitally important to cellular processes and make up the largest class of helicases. Many DEAD-box proteins function as RNA chaperones by accelerating structural transitions of RNA, which can result in the resolution of misfolded conformers or conversion between functional structures. While the biological importance of chaperone proteins is clear, their mechanisms are incompletely understood. Here, we illustrate how the catalytic activity of certain RNAs can be used to measure RNA chaperone activity. By measuring the amount of substrate converted to product, the fraction of catalytically active molecules is measured over time, providing a quantitative measure of the formation or loss of native RNA. The assays are described with references to group I and group II introns and their ribozyme derivatives, and examples are included that illustrate potential complications and indicate how catalytic activity measurements can be combined with physical approaches to gain insights into the mechanisms of DEAD-box proteins as RNA chaperones.

ATP-dependent roles of the DEAD-box protein Mss116p in group II intron splicing in vitro and in vivo

The yeast DEAD-box protein Mss116p functions as a general RNA chaperone in splicing mitochondrial group I and group II introns. For most of its functions, Mss116p is thought to use ATP-dependent RNA unwinding to facilitate RNA structural transitions, but it has been suggested to assist in the folding of one group II intron (aI5γ) primarily by stabilizing a folding intermediate. Here we compare three aI5γ constructs: one with long exons, one with short exons, and a ribozyme construct lacking exons. The long exons result in slower splicing, suggesting that they misfold and/or stabilize nonnative intronic structures. Nevertheless, Mss116p acceleration of all three constructs depends on ATP and is inhibited by mutations that compromise RNA unwinding, suggesting similar mechanisms. Results of splicing assays and a new two-stage assay that separates ribozyme folding and catalysis indicate that maximal folding of all three constructs by Mss116p requires ATP-dependent RNA unwinding. ATP-independent activation is appreciable for only a subpopulation of the minimal ribozyme construct and not for constructs containing exons. As expected for a general RNA chaperone, Mss116p can also disrupt the native ribozyme, which can refold after Mss116p removal. Finally, using yeast strains with mitochondrial DNA containing only the single intron aI5γ, we show that Mss116p mutants promote splicing in vivo to degrees that correlate with their residual ATP-dependent RNA-unwinding activities. Together, our results indicate that, although DEAD-box proteins play multiple roles in RNA folding, the physiological function of Mss116p in aI5γ splicing includes a requirement for ATP-dependent local unfolding, allowing the conversion of nonfunctional RNA structure into functional RNA structure.

DEAD-box protein facilitated RNA folding in vivo

In yeast mitochondria the DEAD-box helicase Mss116p is essential for respiratory growth by acting as group I and group II intron splicing factor. Here we provide the first structure-based insights into how Mss116p assists RNA folding in vivo. Employing an in vivo chemical probing technique, we mapped the structure of the ai5γ group II intron in different genetic backgrounds to characterize its intracellular fold. While the intron adopts the native conformation in the wt yeast strain, we found that the intron is able to form most of its secondary structure, but lacks its tertiary fold in the absence of Mss116p. This suggests that ai5γ is largely unfolded in the mss116-knockout strain and requires the protein at an early step of folding. Notably, in this unfolded state misfolded substructures have not been observed. As most of the protein-induced conformational changes are located within domain D1, Mss116p appears to facilitate the formation of this largest domain, which is the scaffold for docking of other intron domains. These findings suggest that Mss116p assists the ordered assembly of the ai5γ intron in vivo.

Tertiary architecture of the Oceanobacillus iheyensis group II intron

Group II introns are large ribozymes that act as self-splicing and retrotransposable RNA molecules. They are of great interest because of their potential evolutionary relationship to the eukaryotic spliceosome, their continued influence on the organization of many genomes in bacteria and eukaryotes, and their potential utility as tools for gene therapy and biotechnology. One of the most interesting features of group II introns is their relative lack of nucleobase conservation and covariation, which has long suggested that group II intron structures are stabilized by numerous unusual tertiary interactions and backbone-mediated contacts. Here, we provide a detailed description of the tertiary interaction networks within the Oceanobacillus iheyensis group IIC intron, for which a crystal structure was recently solved to 3.1 A resolution. The structure can be described as a set of several intricately constructed tertiary interaction nodes, each of which contains a core of extended stacking networks and elaborate motifs. Many of these nodes are surrounded by a web of ribose zippers, which appear to further stabilize local structure. As predicted from biochemical and genetic studies, the group II intron provides a wealth of new information on strategies for RNA folding and tertiary structural organization.

Structural insights into RNA splicing

Intron splicing is a fundamental biological process whereby noncoding sequences are removed from precursor RNAs. Recent work has provided new insights into the structural features and reaction mechanisms of two introns that catalyze their own splicing from precursor RNA: the group I and II introns. In addition, there is an increasing amount of structural information on the spliceosome, which is a ribonucleoprotein machine that catalyzes nuclear pre-mRNA splicing in eukaryotes. Here, we compare structures and catalytic mechanisms of self-splicing RNAs and we discuss the possible implications for spliceosomal reaction mechanisms.

Divalent metal ions promote the formation of the 5'-splice site recognition complex in a self-splicing group II intron

Group II introns are ribozymes occurring in genes of plants, fungi, lower eukaryotes, and bacteria. These large RNA molecular machines, ranging in length from 400 to 2500 nucleotides, are able to catalyze their own excision from pre-mRNA, as well as to reinsert themselves into RNA or sometimes even DNA. The intronic domain 1 contains two sequences (exon binding sites 1 and 2, EBS1 and EBS2) that pair with their complementary regions at the 3'-end of the 5'-exon (intron binding sites 1 and 2, IBS1 and IBS2) such defining the 5'-splice site. The correct recognition of the 5'-splice site stands at the beginning of the two steps of splicing and is thus crucial for catalysis. It is known that metal ions play an important role in folding and catalysis of ribozymes in general. Here, we characterize the specific metal ion requirements for the formation of the 5'-splice site recognition complex from the mitochondrial yeast group II intron Sc.ai5gamma. Circular dichroism studies reveal that the formation of the EBS1.IBS1 duplex does not necessarily require divalent metal ions, as large amounts of monovalent metal ions also promote the duplex, albeit at a 5000 times higher concentration. Nevertheless, micromolar amounts of divalent metal ions, e.g. Mg2+ or Cd2+, strongly promote the formation of the 5'-splice site. These observations illustrate that a high charge density independent of the nature of the ion is needed for binding EBS1 to IBS1, but divalent metal ions are presumably the better players.

A three-dimensional model of a group II intron RNA and its interaction with the intron-encoded reverse transcriptase

Group II introns are self-splicing ribozymes believed to be the ancestors of spliceosomal introns. Many group II introns encode reverse transcriptases that promote both RNA splicing and intron mobility to new genomic sites. Here we used a circular permutation and crosslinking method to establish 16 intramolecular distance relationships within the mobile Lactococcus lactis Ll.LtrB-DeltaORF intron. Using these new constraints together with 13 established tertiary interactions and eight published crosslinks, we modeled a complete three-dimensional structure of the intron. We also used the circular permutation strategy to map RNA-protein interaction sites through fluorescence quenching and crosslinking assays. Our model provides a comprehensive structural framework for understanding the function of group II ribozymes, their natural structural variations, and the mechanisms by which the intron-encoded protein promotes RNA splicing and intron mobility. The model also suggests an arrangement of active site elements that may be conserved in the spliceosome.

A conserved element that stabilizes the group II intron active site

The internal loop at the base of domain 3 (D3) is one of the most conserved and catalytically important elements of a group II intron. However, the location and molecular nature of its tertiary interaction partners has remained unknown. By employing a combination of site-directed photo-cross-linking and nucleotide analog interference suppression (NAIS), we show that the domain 3 internal loop (D3IL) interacts with the epsilon-epsilon' duplex, which is an active-site element located near the 5'-splice site in D1. Our data also suggest that the D3IL may interact with the bulge of D5, which is a critical active site component. The results of this and other recent studies indicate that the D3IL participates in a complex network of tertiary interactions involving epsilon-epsilon', the bulge of D5 and J23, and that it helps to optimize active site architecture by supporting interactions among these catalytic motifs. Our results are consistent with the role of D3 as a catalytic effector that enhances intron reactivity through active site stabilization.

Three essential and conserved regions of the group II intron are proximal to the 5'-splice site

Despite the central role of group II introns in eukaryotic gene expression and their importance as biophysical and evolutionary model systems, group II intron tertiary structure is not well understood. In order to characterize the architectural organization of intron ai5gamma, we incorporated the photoreactive nucleotides s(4)U and s(6)dG at specific locations within the intron core and monitored the formation of cross-links in folded complexes. The resulting data reveal the locations for many of the most conserved, catalytically important regions of the intron (i.e., the J2/3 linker region, the IC1(i-ii) bulge in domain 1, the bulge of D5, and the 5'-splice site), showing that all of these elements are closely colocalized. In addition, we show by nucleotide analog interference mapping (NAIM) that a specific functional group in J2/3 plays a role in first-step catalysis, which is consistent with its apparent proximity to other first-step components. These results extend our understanding of active-site architecture during the first step of group II intron self-splicing and they provide a structural basis for spliceosomal comparison.

A Second Divalent Metal Ion in the Group II Intron Reaction Center

Group II introns are mobile genetic elements that have been implicated as agents of genetic diversity, and serve as important model systems for investigating RNA catalysis and pre-mRNA splicing. In the absence of an atomic-resolution structure of the intron, detailed understanding of its catalytic mechanism has remained elusive. Previous identification of a divalent metal ion stabilizing the leaving group in both splicing steps suggested that the group II intron may employ a "two-metal ion" mechanism, a catalytic strategy used by a number of protein phosphoester transfer enzymes. Using metal rescue experiments, we now reveal the presence of a second metal ion required for nucleophile activation in the exon-ligation step of group II intron splicing. Coupled with biochemical and structural evidence of at least two metal ions at the group I intron reaction center, these results suggest a mechanistic paradigm for describing catalysis by large ribozymes.

Bacterial group II introns: not just splicing

Group II introns are both catalytic RNAs (ribozymes) and mobile retroelements that were discovered almost 14 years ago. It has been suggested that eukaryotic mRNA introns might have originated from the group II introns present in the alphaproteobacterial progenitor of the mitochondria. Bacterial group II introns are of considerable interest not only because of their evolutionary significance, but also because they could potentially be used as tools for genetic manipulation in biotechnology and for gene therapy. This review summarizes what is known about the splicing mechanisms and mobility of bacterial group II introns, and describes the recent development of group II intron-based gene-targetting methods. Bacterial group II intron diversity, evolutionary relationships, and behaviour in bacteria are also discussed.

Group II intron folding under near-physiological conditions: collapsing to the near-native state

The folding of group II intron ribozymes has been studied extensively under optimal conditions for self-splicing in vitro (42 degrees C and high magnesium ion concentrations). In these cases, the ribozymes fold directly to the native state by an apparent two-state mechanism involving the formation of an obligate intermediate within intron domain 1. We have now characterized the folding pathway under near-physiological conditions. We observe that compaction of the RNA proceeds slowly to completion, even at low magnesium concentration (3 mM). Kinetic analysis shows that this compact species is a "near-native" intermediate state that is readily chased into the native state by the addition of high salt. Structural probing reveals that the near-native state represents a compact domain 1 scaffold that is not yet docked with the catalytic domains (D3 and D5). Interestingly, native ribozyme reverts to the near-native state upon reduction in magnesium concentration. Therefore, while the intron can sustain the intermediate state under physiological conditions, the native structure is not maintained and is likely to require stabilization by protein cofactors in vivo.

Folding of group II introns: a model system for large, multidomain RNAs?

Group II introns are among the largest ribozymes in nature. They have a highly complex tertiary architecture that enables them to catalyze numerous processes, including self-splicing and transposition reactions that have probably contributed to the evolution of eukaryotic genomes. Biophysical analyses show that, despite their large size, these RNAs can fold to their native state through direct pathways that are populated by structurally defined intermediates. In addition, proteins have specific and important roles in this folding process. As a consequence, the study of the group II introns provides a valuable system for both exploring the driving forces behind the folding of multidomain RNA molecules and investigating ribonucleoprotein assembly.

Group II introns: structure, folding and splicing mechanism

Group II introns are large autocatalytic RNAs found in organellar genomes of plants and lower eukaryotes, as well as in some bacterial genomes. Interestingly, these ribozymes share characteristic traits with both spliceosomal introns and non-LTR retrotransposons and may have a common evolutionary ancestor. Furthermore, group II intron features such as structure, folding and catalytic mechanism differ considerably from those of other large ribozymes, making group II introns an attractive model system to gain novel insights into RNA biology and biochemistry. This review explores recent advances in the structural and mechanistic characterization of group II intron architecture and self-splicing.

A folding control element for tertiary collapse of a group II intron ribozyme

Ribozymes derived from the group II intron ai5gamma collapse to a compact intermediate, folding to the native state through a slow, direct pathway that is unperturbed by kinetic traps. Molecular collapse of ribozyme D135 requires high magnesium concentrations and is thought to involve a structural element in domain 1 (D1). We used nucleotide analog interference mapping, in combination with nondenaturing gel electrophoresis, to identify RNA substructures and functional groups that are essential for D135 tertiary collapse. This revealed that the most crucial atoms for compaction are located within a small section of D1 that includes the kappa and zeta elements. This small substructure controls specific collapse of the molecule and, in later steps of the folding pathway, it forms the docking site for catalytic D5. In this way, the stage is set for proper active site formation during the earliest steps of ribozyme folding.

Fluorescence and solution NMR study of the active site of a 160-kDa group II intron ribozyme

We have reconstructed the group II intron from Pylaiella littoralis (PL) into a hydrolytic ribozyme, comprising domains 1-3 (D123) connected in cis plus domain 5 (D5) supplied in trans that efficiently cleaves spliced exon substrates. Using a novel gel-based fluorescence assay and nuclear magnetic resonance (NMR) spectroscopy, we monitored the direct binding of D5 to D123, characterized the kinetics of the spliced exon hydrolysis reaction (which is mechanistically analogous to the reverse of the second catalytic step of splicing), and identified the binding surface of D123 on D5. This PL ribozyme acts as an RNA endonuclease even at low monovalent (100 mM KCl) and divalent ion concentrations (1-10 mM MgCl(2)). This is in contrast to other group II intron ribozyme systems that require high levels of salt, making NMR analysis problematic. D5 binds tightly to D123 with a K(d) of 650 +/- 250 nM, a K(m) of approximately 300 nM, and a K(cat) of 0.02 min(-1) under single turnover conditions. Within the approximately 160-kDa D123-D5 binary complex, site-specific binding to D123 leads to dramatic chemical shift perturbation of residues localized to the tetraloop and internal bulge within D5, suggesting a structural switch model for D5-assisted splicing. This minimal ribozyme thus recapitulates the essential features of the reverse of the second catalytic step and represents a well-behaved system for ongoing high-resolution structural work to complement folding and catalytic functional studies.

Visualization of a group II intron in the 23S rRNA of a stable ribosome

Thousands of introns have been localized to rRNA genes throughout the three domains of life. The consequences of the presence of either a spliced or an unspliced intron in a rRNA for ribosome assembly and packaging are largely unknown. To help address these questions, and to begin an intron imaging study, we selected a member of the self-splicing group II intron family, which is hypothesized to be the progenitor not only of spliceosomal introns but also of non-LTR retrotransposons. We cloned the self-splicing group II Ll.LtrB intron from Lactococcus lactis into L. lactis 23S rRNA. The 2,492-nt Ll.LtrB intron comprises a catalytic core and an ORF, which encodes a protein, LtrA. LtrA forms a ribonucleoprotein (RNP) complex with the intron RNA to mediate splicing and mobility. The chimeric 23S-intron RNA was shown to be splicing proficient in its native host in the presence of LtrA. Furthermore, a low-resolution cryo-EM reconstruction of the L. lactis ribosome fused to the intron-LtrA RNP of a splicing-defective Ll.LtrB intron was obtained. The image revealed the intron as a large, well defined structure. The activity and structural integrity of the intron indicate not only that it can coexist with the ribosome but also that its presence permits the assembly of a stable ribosome. Additionally, we view our results as a proof of principle that ribosome chimeras may be generally useful for studying a wide variety of structured RNAs and RNP complexes that are not amenable to NMR, crystallographic, or single-particle cryo-EM methodologies.

INFO-RNA--a fast approach to inverse RNA folding

MOTIVATION

The structure of RNA molecules is often crucial for their function. Therefore, secondary structure prediction has gained much interest. Here, we consider the inverse RNA folding problem, which means designing RNA sequences that fold into a given structure.

RESULTS

We introduce a new algorithm for the inverse folding problem (INFO-RNA) that consists of two parts; a dynamic programming method for good initial sequences and a following improved stochastic local search that uses an effective neighbor selection method. During the initialization, we design a sequence that among all sequences adopts the given structure with the lowest possible energy. For the selection of neighbors during the search, we use a kind of look-ahead of one selection step applying an additional energy-based criterion. Afterwards, the pre-ordered neighbors are tested using the actual optimization criterion of minimizing the structure distance between the target structure and the mfe structure of the considered neighbor. We compared our algorithm to RNAinverse and RNA-SSD for artificial and biological test sets. Using INFO-RNA, we performed better than RNAinverse and in most cases, we gained better results than RNA-SSD, the probably best inverse RNA folding tool on the market.

AVAILABILITY

www.bioinf.uni-freiburg.de?Subpages/software.html.

An obligate intermediate along the slow folding pathway of a group II intron ribozyme

Most RNA molecules collapse rapidly and reach the native state through a pathway that contains numerous traps and unproductive intermediates. The D135 group II intron ribozyme is unusual in that it can fold slowly and directly to the native state, despite its large size and structural complexity. Here we use hydroxyl radical footprinting and native gel analysis to monitor the timescale of tertiary structure collapse and to detect the presence of obligate intermediates along the folding pathway of D135. We find that structural collapse and native folding of Domain 1 precede assembly of the entire ribozyme, indicating that D1 contains an on-pathway intermediate to folding of the D135 ribozyme. Subsequent docking of Domains 3 and 5, for which D1 provides a preorganized scaffold, appears to be very fast and independent of one another. In contrast to other RNAs, the D135 ribozyme undergoes slow tertiary collapse to a compacted state, with a rate constant that is also limited by the formation D1. These findings provide a new paradigm for RNA folding and they underscore the diversity of RNA biophysical behaviors.

Linking the group II intron catalytic domains: tertiary contacts and structural features of domain 3

Despite its importance for group II intron catalytic activity, structural information on conserved domain 3 (D3) is extremely limited. This domain is known to specifically stimulate the chemical rate of catalysis and to function as a 'catalytic effector'. Of all the long-range tertiary contacts that have been identified within group II introns, none has included D3 residues. Furthermore, little is known about the atoms and functional groups in D3 that contribute to catalysis. Using a nucleotide analog interference mapping assay with an extended repertoire of nucleotide analogs, we have identified functional groups in D3 that are critical for ribozyme activity. These data, together with mutational analysis, suggest the formation of noncanonical base pairs within the phylogenetically conserved internal loop at the base of D3. Finally, a related nucleotide analog interference suppression study resulted in the identification of a direct tertiary interaction between D3 and catalytic domain 5, which sheds new light on D3 function in the group II intron structure and mechanism.

Structural specificity conferred by a group I RNA peripheral element

Like proteins, structured RNAs must specify a native conformation that is more stable than all other possible conformations. Local structure is much more stable for RNA than for protein, so it is likely that the principal challenge for RNA is to stabilize the native structure relative to misfolded and partially folded intermediates rather than unfolded structures. Many structured RNAs contain peripheral structural elements, which surround the core elements. Although it is clear that peripheral elements stabilize structure within RNAs that contain them, it has not yet been explored whether they specifically stabilize the native states relative to alternative folds. A two-piece version of the group I intron RNA from Tetrahymena is used here to show that the peripheral element P5abc binds to the native conformation of the rest of the RNA 50,000 times more tightly than it binds to a long-lived misfolded conformation. Thus, P5abc stabilizes the native conformation by approximately 6 kcal/mol relative to this misfolded conformation. Further, activity measurements show that for the RNA lacking P5abc, the native conformation is only marginally preferred over the misfolded conformation (<0.5 kcal/mol), indicating that the peripheral structure of this RNA is required to achieve a significant thermodynamic preference for the native state. Such "structural specificity" may be a general function of RNA peripheral domains.

Ribozyme catalysis: not different, just worse

Evolution has resoundingly favored protein enzymes over RNA-based catalysts, yet ribozymes occupy important niches in modern cell biology that include the starring role in catalysis of protein synthesis on the ribosome. Recent results from structural and biochemical studies show that natural ribozymes use an impressive range of catalytic mechanisms, beyond metalloenzyme chemistry and analogous to more chemically diverse protein enzymes. These findings make it increasingly possible to compare details of RNA- and protein-based catalysis.

Mapping nucleic acid structure by hydroxyl radical cleavage

Hydroxyl radical footprinting is a widely used method for following the folding of RNA molecules in solution. This method has the unique ability to provide experimental information on the solvent accessibility of each nucleotide in an RNA molecule, so that the folding of all domains of the RNA species can be followed simultaneously at single-nucleotide resolution. In recent work, hydroxyl radical footprinting has been used, often in combination with other global measures of structure, to work out detailed folding pathways and three-dimensional structures for increasingly large and complicated RNA molecules. These include synthetic ribozymes, and group I and group II ribozymes, from yeast, the Azoarcus cyanobacterium and Tetrahymena thermophila. Advances have been made in methods for analysis of hydroxyl radical data, so that the large datasets that result from kinetic folding experiments can be analyzed in a semi-automated and quantitative manner.

Novel cyanine-AMP conjugates for efficient 5' RNA fluorescent labeling by one-step transcription and replacement of [gamma-32P]ATP in RNA structural investigation

Two novel fluorescent cyanine-AMP conjugates, F550/570 and F650/670, have been synthesized to serve as transcription initiators under the T7 φ2.5 promoter. Efficient fluorophore labeling of 5′ RNA is achieved in a single transcription step by including F550/570 and F650/670 in the transcription solution. The current work makes fluorescently labeled RNA readily available for broad applications in biochemistry, molecular biology, structural biology and biomedicine. In particular, site-specifically fluorophore-labeled large RNAs prepared by the current method may be used to investigate RNA structure, folding and mechanism by various fluorescence techniques. In addition, F550/570 and F650/670 may replace [γ-³²P]ATP to prepare 5′ labeled RNA for RNA structural and functional investigation, thereby eliminating the need for the unstable and radio-hazardous [γ-³²P]ATP.

CRS1, a chloroplast group II intron splicing factor, promotes intron folding through specific interactions with two intron domains

Group II introns are ribozymes that catalyze a splicing reaction with the same chemical steps as spliceosome-mediated splicing. Many group II introns have lost the capacity to self-splice while acquiring compensatory interactions with host-derived protein cofactors. Degenerate group II introns are particularly abundant in the organellar genomes of plants, where their requirement for nuclear-encoded splicing factors provides a means for the integration of nuclear and organellar functions. We present a biochemical analysis of the interactions between a nuclear-encoded group II splicing factor and its chloroplast intron target. The maize (Zea mays) protein Chloroplast RNA Splicing 1 (CRS1) is required specifically for the splicing of the group II intron in the chloroplast atpF gene and belongs to a plant-specific protein family defined by a recently recognized RNA binding domain, the CRM domain. We show that CRS1's specificity for the atpF intron in vivo can be explained by CRS1's intrinsic RNA binding properties. CRS1 binds in vitro with high affinity and specificity to atpF intron RNA and does so through the recognition of elements in intron domains I and IV. These binding sites are not conserved in other group II introns, accounting for CRS1's intron specificity. In the absence of CRS1, the atpF intron has little uniform tertiary structure even at elevated [Mg2+]. CRS1 binding reorganizes the RNA, such that intron elements expected to be at the catalytic core become less accessible to solvent. We conclude that CRS1 promotes the folding of its group II intron target through tight and specific interactions with two peripheral intron segments.

Mobile Group II Introns

Mobile group II introns, found in bacterial and organellar genomes, are both catalytic RNAs and retrotransposable elements. They use an extraordinary mobility mechanism in which the excised intron RNA reverse splices directly into a DNA target site and is then reverse transcribed by the intron-encoded protein. After DNA insertion, the introns remove themselves by protein-assisted, autocatalytic RNA splicing, thereby minimizing host damage. Here we discuss the experimental basis for our current understanding of group II intron mobility mechanisms, beginning with genetic observations in yeast mitochondria, and culminating with a detailed understanding of molecular mechanisms shared by organellar and bacterial group II introns. We also discuss recently discovered links between group II intron mobility and DNA replication, new insights into group II intron evolution arising from bacterial genome sequencing, and the evolutionary relationship between group II introns and both eukaryotic spliceosomal introns and non-LTR-retrotransposons. Finally, we describe the development of mobile group II introns into gene-targeting vectors, "targetrons," which have programmable target specificity.

A new algorithm for RNA secondary structure design

The function of many RNAs depends crucially on their structure. Therefore, the design of RNA molecules with specific structural properties has many potential applications, e.g. in the context of investigating the function of biological RNAs, of creating new ribozymes, or of designing artificial RNA nanostructures. Here, we present a new algorithm for solving the following RNA secondary structure design problem: given a secondary structure, find an RNA sequence (if any) that is predicted to fold to that structure. Unlike the (pseudoknot-free) secondary structure prediction problem, this problem appears to be hard computationally. Our new algorithm, "RNA Secondary Structure Designer (RNA-SSD)", is based on stochastic local search, a prominent general approach for solving hard combinatorial problems. A thorough empirical evaluation on computationally predicted structures of biological sequences and artificially generated RNA structures as well as on empirically modelled structures from the biological literature shows that RNA-SSD substantially out-performs the best known algorithm for this problem, RNAinverse from the Vienna RNA Package. In particular, the new algorithm is able to solve structures, consistently, for which RNAinverse is unable to find solutions. The RNA-SSD software is publically available under the name of RNA Designer at the RNASoft website (www.rnasoft.ca).

Solution structure of domain 5 of a group II intron ribozyme reveals a new RNA motif

Domain 5 (D5) is the central core of group II intron ribozymes. Many base and backbone substituents of this highly conserved hairpin participate in catalysis and are crucial for binding to other intron domains. We report the solution structures of the 34-nucleotide D5 hairpin from the group II intron ai5 gamma in the absence and presence of divalent metal ions. The bulge region of D5 adopts a novel fold, where G26 adopts a syn conformation and flips down into the major groove of helix 1, close to the major groove face of the catalytic AGC triad. The backbone near G26 is kinked, exposing the base plane of the adjacent A-U pair to the solvent and causing bases of the bulge to stack intercalatively. Metal ion titrations reveal strong Mg(2+) binding to a minor groove shelf in the D5 bulge. Another distinct metal ion-binding site is observed along the minor groove side of the catalytic triad, in a manner consistent with metal ion binding in the ribozyme active site.

Effects of maturase binding and Mg2+ concentration on group II intron RNA folding investigated by UV cross-linking

The Lactococcus lactis Ll.LtrB group II intron encodes a reverse transcriptase/maturase (LtrA protein) that promotes RNA splicing by stabilizing the catalytically active RNA structure. Here, we mapped 17 UV cross-links induced in both wild-type Ll.LtrB RNA and Ll.LtrB-Delta2486 RNA, which has a branch-point deletion that prevents splicing, and we used these cross-links to follow tertiary structure formation under different conditions in the presence or absence of the LtrA protein. Twelve of the cross-links are long-range, with six near known tertiary interaction sites in the active RNA structure. In a reaction medium containing 0.5 M NH(4)Cl, eight of the 17 cross-links were detected in the absence of Mg(2+) or the presence of EDTA, and all were detected at 5 mM Mg(2+), where efficient splicing requires the LtrA protein. The frequencies of all but four cross-links increased with increasing Mg(2+) concentrations, becoming maximal between 4 and 50 mM Mg(2+), where the intron is self-splicing. These findings suggest that a high Mg(2+) concentration induces self-splicing by globally stabilizing tertiary structure, including key tertiary interactions that are required for catalytic activity. Significantly, the binding of the maturase under protein-dependent splicing conditions (0.5 M NH(4)Cl and 5 mM Mg(2+)) increased the frequency of only nine cross-links, seven of which are long-range, suggesting that, in contrast to a high Mg(2+) concentration, LtrA promotes splicing by stabilizing critical tertiary structure interactions, while leaving other regions of the intron relatively flexible. This difference may contribute to the high rate of protein-dependent splicing, relative to the rate of self-splicing. The propensity of the intron RNA to form tertiary structure even at relatively low Mg(2+) concentrations raises the possibility that the maturase functions at least in part by tertiary structure capture. Finally, an abundant central wheel cross-link, present in >50% of the molecules at 5 mM Mg(2+), suggests models in which group II intron domains I and II are either coaxially stacked or aligned in parallel, bringing the 5'-splice site together with the 3'-splice site and catalytic core elements at JII/III. This and other cross-links provide new constraints for three-dimensional structural modeling of the group II intron catalytic core.

An Alternative Route for the Folding of Large RNAs: Apparent Two-state Folding by a Group II Intron Ribozyme

Despite a growing literature on the folding of RNA, our understanding of tertiary folding in large RNAs derives from studies on a small set of molecular examples, with primary focus on group I introns and RNase P RNA. To broaden the scope of RNA folding models and to better understand group II intron function, we have examined the tertiary folding of a ribozyme (D135) that is derived from the self-splicing ai5gamma intron from yeast mitochondria. The D135 ribozyme folds homogeneously and cooperatively into a compact, well-defined tertiary structure that includes all regions critical for active-site organization and substrate recognition. When D135 was treated with increasing concentrations of Mg(2+) and then subjected to hydroxyl radical footprinting, similar Mg(2+) dependencies were seen for internalization of all regions of the molecule, suggesting a highly cooperative folding behavior. In this work, we show that global folding and compaction of the molecule have the same magnesium dependence as the local folding previously observed. Furthermore, urea denaturation studies indicate highly cooperative unfolding of the ribozyme that is governed by thermodynamic parameters similar to those for forward folding. In fact, D135 folds homogeneously and cooperatively from the unfolded state to its native, active structure, thereby demonstrating functional reversibility in RNA folding. Taken together, the data are consistent with two-state folding of the D135 ribozyme, which is surprising given the size and multi-domain structure of the RNA. The findings establish that the accumulation of stable intermediates prior to formation of the native state is not a universal feature of RNA folding and that there is an alternative paradigm in which the folding landscape is relatively smooth, lacking rugged features that obstruct folding to the native state.

Domains 2 and 3 interact to form critical elements of the group II intron active site

Group II introns are self-splicing RNA molecules that also behave as mobile genetic elements. The secondary structure of group II intron RNAs is typically described as a series of six domains that project from a central wheel. Most structural and mechanistic analyses of the intron have focused on domains 1 and 5, which contain the residues essential for catalysis, and on domain 6, which contains the branch-point adenosine. Domains 2 and 3 (D2, D3) have been shown to make important contributions to intronic activity; however, information about their function is quite limited. To elucidate the role of D2 and D3 in group II ribozyme catalysis, we built a series of multi-piece ribozyme constructs based on the ai5gamma group II intron. These constructs are designed to shed light on the roles of D2 and D3 in some of the major reactions catalyzed by the intron: 5'-exon cleavage, branching, and substrate hydrolysis. Reactions with these constructs demonstrate that D3 stimulates the chemical rate constant of group II intron reactions, and that it behaves as a form of catalytic effector. However, D3 is unable to associate independently with the ribozyme core. Docking of D3 is mediated by a short duplex that is found at the base of D2. In addition to recruiting D3 into the core, the D2 stem directs the folding of the adjacent j(2/3) linker, which is among the most conserved elements in the group II intron active site. In turn, the D2 stem contributes to 5'-splice site docking and ribozyme conformational change. Nucleotide analog interference mapping suggests an interaction between the D2 stem and D3 that builds on the known theta-theta' interaction and extends it into D3. These results establish that D3 and the base of D2 are key elements of the group II intron core and they suggest a hierarchy for active-site assembly.

A group II intron inserted into a bacterial heat-shock operon shows autocatalytic activity and unusual thermostability

Group II intron RNAs fold into catalytically active structures that catalyze their own self-splicing and subsequent transposition into DNA. Because of their remarkable enzymatic properties, it has been of interest to find new group II introns with novel properties. Here we report the cloning, sequencing, and mechanistic characterization of a new group II intron from the bacterium Azotobacter vinelandii (the AV intron). Although it bears the characteristics of the group IIB1 class, the AV intron is unusually G-C rich, and it has unusual insertion sequences and a minimal dependence on the EBS2-IBS2 tertiary interaction. The AV intron is the first bacterial intron that has been found to reside in a housekeeping gene which, in this case, encodes a heat-shock protein (hsp60). Consistent with a potential role in heat-shock regulation, kinetic analysis reveals that AV intron self-splicing is activated only at elevated temperatures. This suggests a novel pathway for the regulation of heat shock in prokaryotes and provides a first example of a thermally tolerant group II intron RNA.

Mutations in the Lactococcus lactis Ll.LtrB group II intron that retain mobility in vivo

BACKGROUND

Group II introns are mobile genetic elements that form conserved secondary and tertiary structures. In order to determine which of the conserved structural elements are required for mobility, a series of domain and sub-domain deletions were made in the Lactococcus lactis group II intron (Ll.LtrB) and tested for mobility in a genetic assay. Point mutations in domains V and VI were also tested.

RESULTS

The largest deletion that could be made without severely compromising mobility was 158 nucleotides in DIVb(1-2). This mutant had a mobility frequency comparable to the wild-type Ll.LtrB intron (DeltaORF construct). Hence, all subsequent mutations were done in this mutant background. Deletion of DIIb reduced mobility to approximately 18% of wild-type, while another deletion in domain II (nts 404-459) was mobile to a minor extent. Only two deletions in DI and none in DIII were tolerated. Some mobility was also observed for a DIVa deletion mutant. Of the three point mutants at position G3 in DV, only G3A retained mobility. In DVI, deletion of the branch-point nucleotide abolished mobility, but the presence of any nucleotide at the branch-point position restored mobility to some extent.

CONCLUSIONS

The smallest intron capable of efficient retrohoming was 725 nucleotides, comprising the DIVb(1-2) and DII(ii)a,b deletions. The tertiary elements found to be nonessential for mobility were alpha, kappa and eta. In DV, only the G3A mutant was mobile. A branch-point residue is required for intron mobility.

Conservation of helical structure contributes to functional metal ion interactions in the catalytic domain of ribonuclease P RNA

Like protein enzymes, catalytic RNAs contain conserved structure motifs important for function. A universal feature of the catalytic domain of ribonuclease P RNA is a bulged-helix motif within the P1-P4 helix junction. Here, we show that changes in bulged nucleotide identity and position within helix P4 affect both catalysis and substrate binding, while a subset of the mutations resulted only in catalytic defects. We find that the proximity of the bulge to sites of metal ion coordination in P4 is important for catalysis; moving the bulge distal to these sites and deleting it had similarly large effects, while moving it proximal to these sites had only a moderate effect on catalysis. To test whether the effects of the mutations are linked to metal ion interactions, we used terbium-dependent cleavage of the phosphate backbone to probe metal ion-binding sites in the wild-type and mutant ribozymes. We detect cleavages at specific sites within the catalytic domain, including helix P4 and J3/4, which have previously been shown to participate directly in metal ion interactions. Mutations introduced into P4 cause local changes in the terbium cleavage pattern due to alternate metal ion-binding configurations with the helix. In addition, a bulge deletion mutation results in a 100-fold decrease in the single turnover cleavage rate constant at saturating magnesium levels, and a reduced affinity for magnesium ions important for catalysis. In light of the alternate terbium cleavage pattern in P4 caused by bulge deletion, this decreased ability to utilize magnesium ions for catalysis appears to be due to localized structural changes in the ribozyme's catalytic core that weaken metal ion interactions in P4 and J3/4. The information reported here, therefore, provides evidence that the universal conservation of the P4 structure is based in part on optimization of metal ion interactions important for catalysis.

Group II introns: highly specific endonucleases with modular structures and diverse catalytic functions

Group II introns are large catalytic RNAs with a remarkable repertoire of reactions. Here we present construct designs and protocols that were used to develop a set of kinetic frameworks for studying the structure and reaction mechanisms of group II introns and ribozymes derived from them. In addition, we discuss application of these systems to structure/function analysis of the ai5gamma group II intron.