Gene expression analysis using strains constructed by NHEJ-mediated one-step promoter cloning in the yeast Kluyveromyces marxianus

Screening of broad-host expression promoters for shuttle expression vectors in non-conventional yeasts and bacteria

BACKGROUND

Non-conventional yeasts and bacteria gain significance in synthetic biology for their unique metabolic capabilities in converting low-cost renewable feedstocks into valuable products. Improving metabolic pathways and increasing bioproduct yields remain dependent on the strategically use of various promoters in these microbes. The development of broad-spectrum promoter libraries with varying strengths for different hosts is attractive for biosynthetic engineers.

RESULTS

In this study, five Yarrowia lipolytica constitutive promoters (yl.hp4d, yl.FBA1in, yl.TEF1, yl.TDH1, yl.EXP1) and five Kluyveromyces marxianus constitutive promoters (km.PDC1, km.FBA1, km.TEF1, km.TDH3, km.ENO1) were selected to construct promoter-reporter vectors, utilizing α-amylase and red fluorescent protein (RFP) as reporter genes. The promoters' strengths were systematically characterized across Y. lipolytica, K. marxianus, Pichia pastoris, Escherichia coli, and Corynebacterium glutamicum. We discovered that five K. marxianus promoters can all express genes in Y. lipolytica and that five Y. lipolytica promoters can all express genes in K. marxianus with variable expression strengths. Significantly, the yl.TEF1 and km.TEF1 yeast promoters exhibited their adaptability in P. pastoris, E. coli, and C. glutamicum. In yeast P. pastoris, the yl.TEF1 promoter exhibited substantial expression of both amylase and RFP. In bacteria E. coli and C. glutamicum, the eukaryotic km.TEF1 promoter demonstrated robust expression of RFP. Significantly, in E. coli, The RFP expression strength of the km.TEF1 promoter reached ∼20% of the T7 promoter.

CONCLUSION

Non-conventional yeast promoters with diverse and cross-domain applicability have great potential for developing innovative and dynamic regulated systems that can effectively manage carbon flux and enhance target bioproduct synthesis across diverse microbial hosts.

Use of red, far-red, and near-infrared light in imaging of yeasts and filamentous fungi

Abstract

While phototoxicity can be a useful therapeutic modality not only for eliminating malignant cells but also in treating fungal infections, mycologists aiming to observe morphological changes or molecular events in fungi, especially when long observation periods or high light fluxes are warranted, encounter problems owed to altered regulatory pathways or even cell death caused by various photosensing mechanisms. Consequently, the ever expanding repertoire of visible fluorescent protein toolboxes and high-resolution microscopy methods designed to investigate fungi in vitro and in vivo need to comply with an additional requirement: to decrease the unwanted side effects of illumination. In addition to optimizing exposure, an obvious solution is red-shifted illumination, which, however, does not come without compromises. This review summarizes the interactions of fungi with light and the various molecular biology and technology approaches developed for exploring their functions on the molecular, cellular, and in vivo microscopic levels, and outlines the progress towards reducing phototoxicity through applying far-red and near-infrared light.

Key points

• Fungal biological processes alter upon illumination, also under the microscope

• Red shifted fluorescent protein toolboxes decrease interference by illumination

• Innovations like two-photon, lightsheet, and near IR microscopy reduce phototoxicity

Various short autonomously replicating sequences from the yeast Kluyveromyces marxianus seemingly without canonical consensus

Eukaryotic autonomously replicating sequences (ARSs) are composed of three domains, A, B, and C. Domain A is comprised of an ARS consensus sequence (ACS), while the B domain has the DNA unwinding element and the C domain is important for DNA-protein interactions. In Saccharomyces cerevisiae and Kluyveromyces lactis ARS101, the ACS is commonly composed of 11 bp, 5ˊ-(A/T)AAA(C/T)ATAAA(A/T)-3ˊ. This core sequence is essential for S. cerevisiae and K. lactis ARS activity. In this study, we identified ARS-containing sequences from genomic libraries of the yeast Kluyveromyces marxianus DMKU3-1042 and validated their replication activities. The identified K. marxianus DMKU3-1042 ARSs (KmARSs) have very effective replication ability but their sequences are divergent and share no common consensus. We have carried out point mutations, deletions, and base pairs substitutions within the sequences of some of the KmARSs to identify the sequence(s) that influence the replication activity. Consensus sequences same as the 11 bp ACS of S. cerevisiae and K. lactis were not found in all minimum functional KmARSs reported here except KmARS7. Moreover, partial sequences from different KmARSs are interchangeable among each other to retain the ARS activity. We have also specifically identified the essential nucleotides, which are indispensable for replication, within some of the KmARSs. Our deletions analysis revealed that only 21 bp in KmARS18 could retain the ARS activity. The identified KmARSs in this study are unique compared to other yeasts’ ARSs, do not share common ACS, and are interchangeable.

•

Identification of minimal autonomously replicating sequences (ARSs) from the yeast Kluyveromyces marxianus DMKU3-1042.

•

The identities of the isolated ARSs are divergent and have no common consensus with the ARSs of other yeasts.

•

A short ARS sequence of twenty-one nucleotides functions as an effective replicator in K. marxianus DMKU3-1042.

•

Segments of ARSs from the yeast K. marxianus are interchangeable among each other.

•

Functional ARSs are found in both the intergenic and coding sequences of the strain DMKU3-1042.

A CRISPR/Cas9-Mediated, Homology-Independent Tool Developed for Targeted Genome Integration in Yarrowia lipolytica

Yarrowia lipolytica has been extensively used to produce essential chemicals and enzymes. As in most other eukaryotes, nonhomologous end joining (NHEJ) is the major repair pathway for DNA double-strand breaks in Y. lipolytica Although numerous studies have attempted to achieve targeted genome integration through homologous recombination (HR), this process requires the construction of homologous arms, which is time-consuming. This study aimed to develop a homology-independent and CRISPR/Cas9-mediated targeted genome integration tool in Y. lipolytica Through optimization of the cleavage efficiency of Cas9, targeted integration of a hyg fragment was achieved with 12.9% efficiency, which was further improved by manipulation of the fidelity of NHEJ repair, the cell cycle, and the integration sites. Thus, the targeted integration rate reached 55% through G₁ phase synchronization. This tool was successfully applied for the rapid verification of intronic promoters and iterative integration of four genes in the pathway for canthaxanthin biosynthesis. This homology-independent integration tool does not require homologous templates and selection markers and achieves one-step targeted genome integration of the 8,417-bp DNA fragment, potentially replacing current HR-dependent genome-editing methods for Y. lipolytica IMPORTANCE This study describes the development and optimization of a homology-independent targeted genome integration tool mediated by CRISPR/Cas9 in Yarrowia lipolytica This tool does not require the construction of homologous templates and can be used to rapidly verify genetic elements and to iteratively integrate multiple-gene pathways in Y. lipolytica This tool may serve as a potential supplement to current HR-dependent genome-editing methods for eukaryotes.

Biological Parts for Kluyveromyces marxianus Synthetic Biology

Kluyveromyces marxianus is a non-conventional yeast whose physiology and metabolism lends itself to diverse biotechnological applications. While the wild-type yeast is already in use for producing fragrances and fermented products, the lack of standardised tools for its genetic and metabolic engineering prevent it from being used as a next-generation cell factory for bio-based chemicals. In this paper, we bring together and characterise a set of native K. marxianus parts for the expression of multiple genes for metabolic engineering and synthetic biology. All parts are cloned and stored according to the MoClo/Yeast Tool Kit standard for quick sharing and rapid construction. Using available genomic and transcriptomic data, we have selected promoters and terminators to fine-tune constitutive and inducible gene expression. The collection includes a number of known centromeres and autonomously replication sequences (ARS). We also provide a number of chromosomal integration sites selected for efficiency or visible phenotypes for rapid screening. Finally, we provide a single-plasmid CRISPR/Cas9 platform for genome engineering and facilitated gene targeting, and rationally create auxotrophic strains to expand the common range of selection markers available to K. marxianus. The curated and characterised tools we have provided in this kit will serve as a base to efficiently build next-generation cell factories from this alternative yeast. Plasmids containing all parts are available at Addgene for public distribution.

YHp as a highly stable, hyper-copy, hyper-expression plasmid constructed using a full 2-μm circle sequence in cir0 strains of Saccharomyces cerevisiae

In the yeast Saccharomyces cerevisiae, the yeast episomal plasmid (YEp), containing a partial sequence from a natural 2-μm plasmid, has been frequently used to induce high levels of gene expression. In this study, we used Japanese sake yeast natural cir0 strain as a host for constructing an entire 2-μm plasmid with an expression construct using the three-fragment gap-repair method without Escherichia coli manipulation. The 2-μm plasmid contains two long inverted repeats, which is problematic for the amplification by polymerase chain reaction. Therefore, we amplified it by dividing into two fragments, each containing a single repeat together with an overlapping sequence for homologous recombination. TDH3 promoter-driven yEmRFP (TDH3p-yEmRFP) and the URA3 were used as a reporter gene and a selection marker, respectively, and inserted at the 3' end of the RAF1 gene on the 2-μm plasmid. The three fragments were combined and used for the transformation of sake yeast cir0 ura3- strain. The resulting transformant colonies showed a red or purple coloration, which was significantly stronger than that of the cells transformed with YEp-TDH3p-yEmRFP. The 2-μm transformants were cultured in YPD medium and observed by fluorescence microscopy. Almost all cells showed strong fluorescence, suggesting that the plasmid was preserved during nonselective culture conditions. The constructed plasmid maintained a high copy state similar to that of the natural 2-μm plasmid, and the red fluorescent protein expression was 54 fold compared with the chromosomal integrant. This vector is named YHp, the Yeast Hyper expression plasmid.

End Joining-Mediated Gene Expression in Mammalian Cells Using PCR-Amplified DNA Constructs that Contain Terminator in Front of Promoter

Mammalian gene expression constructs are generally prepared in a plasmid vector, in which a promoter and terminator are located upstream and downstream of a protein-coding sequence, respectively. In this study, we found that front terminator constructs-DNA constructs containing a terminator upstream of a promoter rather than downstream of a coding region-could sufficiently express proteins as a result of end joining of the introduced DNA fragment. By taking advantage of front terminator constructs, FLAG substitutions, and deletions were generated using mutagenesis primers to identify amino acids specifically recognized by commercial FLAG antibodies. A minimal epitope sequence for polyclonal FLAG antibody recognition was also identified. In addition, we analyzed the sequence of a C-terminal Ser-Lys-Leu peroxisome localization signal, and identified the key residues necessary for peroxisome targeting. Moreover, front terminator constructs of hepatitis B surface antigen were used for deletion analysis, leading to the identification of regions required for the particle formation. Collectively, these results indicate that front terminator constructs allow for easy manipulations of C-terminal protein-coding sequences, and suggest that direct gene expression with PCR-amplified DNA is useful for high-throughput protein analysis in mammalian cells.

Binding Sites in the EFG1 Promoter for Transcription Factors in a Proposed Regulatory Network: A Functional Analysis in the White and Opaque Phases of Candida albicans

In Candida albicans the transcription factor Efg1, which is differentially expressed in the white phase of the white-opaque transition, is essential for expression of the white phenotype. It is one of six transcription factors included in a proposed interactive transcription network regulating white-opaque switching and maintenance of the alternative phenotypes. Ten sites were identified in the EFG1 promoter that differentially bind one or more of the network transcription factors in the white and/or opaque phase. To explore the functionality of these binding sites in the differential expression of EFG1, we generated targeted deletions of each of the 10 binding sites, combinatorial deletions, and regional deletions using a Renillareniformis luciferase reporter system. Individually targeted deletion of only four of the 10 sites had minor effects consistent with differential expression of EFG1, and only in the opaque phase. Alternative explanations are considered.