Accelerated deciphering of the genetic architecture of agricultural economic traits in pigs using a low-coverage whole-genome sequencing strategy

Imputation strategies for low-coverage whole-genome sequencing data and their effects on genomic prediction and genome-wide association studies in pigs

The uncertainty resulting from missing genotypes in low-coverage whole-genome sequencing (LCWGS) data complicates genotype imputation. The aim of this study is to find out an optimal strategy for accurately imputing LCWGS data and assess its effectiveness for genomic prediction (GP) and genome-wide association study (GWAS) on economically important traits of Large White pigs. The LCWGS data of 1 423 Large White pigs were imputed using three different strategies: (1) using the high-coverage whole-genome sequencing (HCWGS) of 30 key progenitors as the reference panel (Ref_LG); (2) mixing HCWGS of key progenitors with LCWGS (Mix_HLG) and (3) self-imputation in LCWGS (Within_LG). Additionally, to compare the imputation effects of LCWGS, we also imputed SNP chip data of 1 423 Large White pigs to the whole-genome sequencing level using the reference panel consisting of key progenitors (Ref_SNP). To evaluate effects of the imputed sequencing data, we compared the accuracies of GP and statistical power of GWAS for four reproductive traits based on the chip data, sequencing data imputed from chip data and LCWGS data using an optimal strategy. The average imputation accuracies of the Within_LG, Ref_LG and Mix_HLG were 0.9893, 0.9899 and 0.9875, respectively, which were higher than that of the Ref_SNP (0.8522). Using the imputed sequencing data from LCWGS with the Ref_LG imputation strategy, the accuracies of GP for four traits improved by approximately 0.31-1.04% compared to the chip data, and by 0.7-1.05% compared to the imputed sequencing data from chip data. Furthermore, by using the sequence data imputed from LCWGS with the Ref_LG, 18 candidate genes were identified to be associated with the four reproductive traits of interest in Large White pigs: total number of piglets born - EPC2, MBD5, ORC4 and ACVR2A; number of piglets born healthy - IKBKE; total litter weight of piglets born alive - HSPA13 and CPA1; gestation length - GTF2H5, ITGAV, NFE2L2, CALCRL, ITGA4, STAT1, HOXD10, MSTN, COL5A2 and STAT4. With the exception of EPC2, ORC4, ACVR2A and MSTN, others represent novel candidates. Our findings can provide a reference for the application of LCWGS data in livestock and poultry.

Genome-wide variation study and inter-tissue communication analysis unveil regulatory mechanisms of egg-laying performance in chickens

Egg-laying performance is of great economic importance in poultry, but the underlying genetic mechanisms are still elusive. In this work, we conduct a multi-omics and multi-tissue integrative study in hens with distinct egg production, to detect the hub candidate genes and construct hub molecular networks contributing to egg-laying phenotypic differences. We identifiy three hub candidate genes as egg-laying facilitators: TFPI2, which promotes the GnRH secretion in hypothalamic neuron cells; CAMK2D, which promotes the FSHβ and LHβ secretion in pituitary cells; and OSTN, which promotes granulosa cell proliferation and the synthesis of sex steroid hormones. We reveal key endocrine factors involving egg production by inter-tissue crosstalk analysis, and demonstrate that both a hepatokine, APOA4, and an adipokine, ANGPTL2, could increase egg production by inter-tissue communication with hypothalamic-pituitary-ovarian axis. Together, These results reveal the molecular mechanisms of multi-tissue coordinative regulation of chicken egg-laying performance and provide key insights to avian reproductive regulation.

Genome-wide detection of runs of homozygosity and heterozygosity in Tunchang pigs

Tunchang pigs, mainly distributed throughout Hainan Province of China, are well-known for their superior meat quality, crude feed tolerance, and adaptability to high temperatures and humidity. Runs of homozygosity (ROH) can provide valuable information about the inbreeding coefficient in individuals and selection signals that may reveal candidate genes associated with key functional traits. Runs of heterozygosity (ROHet) are commonly associated with balance selection, which can help us understand the adaptive evolutionary history of domestic animals. In this study, we investigated ROHs and ROHets in 88 Tunchang pigs. We also compared the estimates of inbreeding coefficients in individuals calculated based on four methods. In summary, we detected a total of 16 ROH islands in our study, and 100 genes were found within ROH regions. These genes were correlated with economically important traits such as reproduction (e.g., SERPIND1, HIRA), meat quality (e.g., PI4KA, TBX1), immunity (e.g., ESS2, RANBP1), adaption to heat stress (TXNRD2 and DGCR8), and crude food tolerance (TRPM6). Moreover, we discovered 18 ROHet islands harbouring genes associated with reproduction (e.g., ARHGEF12, BMPR2), immune system (e.g., BRD4, DNMT3B). These findings may help us design effective breeding and conservation strategies for this unique breed.

Residual network improves the prediction accuracy of genomic selection

Genetic improvement of complex traits in animal and plant breeding depends on the efficient and accurate estimation of breeding values. Deep learning methods have been shown to be not superior over traditional genomic selection (GS) methods, partially due to the degradation problem (i.e. with the increase of the model depth, the performance of the deeper model deteriorates). Since the deep learning method residual network (ResNet) is designed to solve gradient degradation, we examined its performance and factors related to its prediction accuracy in GS. Here we compared the prediction accuracy of conventional genomic best linear unbiased prediction, Bayesian methods (BayesA, BayesB, BayesC, and Bayesian Lasso), and two deep learning methods, convolutional neural network and ResNet, on three datasets (wheat, simulated and real pig data). ResNet outperformed other methods in both Pearson's correlation coefficient (PCC) and mean squared error (MSE) on the wheat and simulated data. For the pig backfat depth trait, ResNet still had the lowest MSE, whereas Bayesian Lasso had the highest PCC. We further clustered the pig data into four groups and, on one separated group, ResNet had the highest prediction accuracy (both PCC and MSE). Transfer learning was adopted and capable of enhancing the performance of both convolutional neural network and ResNet. Taken together, our findings indicate that ResNet could improve GS prediction accuracy, affected potentially by factors such as the genetic architecture of complex traits, data volume, and heterogeneity.

Cost-effective genomic prediction of critical economic traits in sturgeons through low-coverage sequencing

Low-coverage whole-genome sequencing (LCS) offers a cost-effective alternative for sturgeon breeding, especially given the lack of SNP chips and the high costs associated with whole-genome sequencing. In this study, the efficiency of LCS for genotype imputation and genomic prediction was assessed in 643 sequenced Russian sturgeons (∼13.68×). The results showed that using BaseVar+STITCH at a sequencing depth of 2× with a sample size larger than 300 resulted in the highest genotyping accuracy. In addition, when the sequencing depth reached 0.5× and SNP density was reduced to 50 K through linkage disequilibrium pruning, the prediction accuracy was comparable to that of whole sequencing depth. Furthermore, an incremental feature selection method has the potential to improve prediction accuracy. This study suggests that the combination of LCS and imputation can be a cost-effective strategy, contributing to the genetic improvement of economic traits and promoting genetic gains in aquaculture species.

Comparative population genomics reveals convergent and divergent selection in the apricot-peach-plum-mei complex

The economically significant genus Prunus includes fruit and nut crops that have been domesticated for shared and specific agronomic traits; however, the genomic signals of convergent and divergent selection have not been elucidated. In this study, we aimed to detect genomic signatures of convergent and divergent selection by conducting comparative population genomic analyses of the apricot-peach-plum-mei (APPM) complex, utilizing a haplotype-resolved telomere-to-telomere (T2T) genome assembly and population resequencing data. The haplotype-resolved T2T reference genome for the plum cultivar was assembled through HiFi and Hi-C reads, resulting in two haplotypes 251.25 and 251.29 Mb in size, respectively. Comparative genomics reveals a chromosomal translocation of ~1.17 Mb in the apricot genomes compared with peach, plum, and mei. Notably, the translocation involves the D locus, significantly impacting titratable acidity (TA), pH, and sugar content. Population genetic analysis detected substantial gene flow between plum and apricot, with introgression regions enriched in post-embryonic development and pollen germination processes. Comparative population genetic analyses revealed convergent selection for stress tolerance, flower development, and fruit ripening, along with divergent selection shaping specific crop, such as somatic embryogenesis in plum, pollen germination in mei, and hormone regulation in peach. Notably, selective sweeps on chromosome 7 coincide with a chromosomal collinearity from the comparative genomics, impacting key fruit-softening genes such as PG, regulated by ERF and RMA1H1. Overall, this study provides insights into the genetic diversity, evolutionary history, and domestication of the APPM complex, offering valuable implications for genetic studies and breeding programs of Prunus crops.

ABCD4 is associated with mammary gland development in mammals

BACKGROUND

Mammary gland development is a critical process in mammals, crucial for their reproductive success and offspring nourishment. However, the functional roles of key candidate genes associated with teat number, including ABCD4, VRTN, PROX2, and DLST, in this developmental process remain elusive. To address this gap in knowledge, we conducted an in-depth investigation into the dynamic expression patterns, functional implications, and regulatory networks of these candidate genes during mouse mammary gland development.

RESULTS

In this study, the spatial and temporal patterns of key genes were characterized in mammary gland development. Using time-series single-cell data, we uncovered differences in the expression of A bcd4, Vrtn, Prox2, and Dlst in cell population of the mammary gland during embryonic and adult stages, while Vrtn was not detected in any cells. We found that only overexpression and knockdown of Abcd4 could inhibit proliferation and promote apoptosis of HC11 mammary epithelial cells, whereas Prox2 and Dlst had no significant effect on these cells. Using RNA-seq and qPCR, further analysis revealed that Abcd4 can induce widespread changes in the expression levels of genes involved in mammary gland development, such as Igfbp3, Ccl5, Tlr2, and Prlr, which were primarily associated with the MAPK, JAK-STAT, and PI3K-AKT pathways by functional enrichment.

CONCLUSIONS

These findings revealed ABCD4 as a candidate gene pivotal for regulating mammary gland development and lactation during pregnancy by influencing PRLR expression.

MPH: fast REML for large-scale genome partitioning of quantitative genetic variation

MOTIVATION

Genome partitioning of quantitative genetic variation is useful for dissecting the genetic architecture of complex traits. However, existing methods, such as Haseman-Elston regression and linkage disequilibrium score regression, often face limitations when handling extensive farm animal datasets, as demonstrated in this study.

RESULTS

To overcome this challenge, we present MPH, a novel software tool designed for efficient genome partitioning analyses using restricted maximum likelihood. The computational efficiency of MPH primarily stems from two key factors: the utilization of stochastic trace estimators and the comprehensive implementation of parallel computation. Evaluations with simulated and real datasets demonstrate that MPH achieves comparable accuracy and significantly enhances convergence, speed, and memory efficiency compared to widely used tools like GCTA and LDAK. These advancements facilitate large-scale, comprehensive analyses of complex genetic architectures in farm animals.

AVAILABILITY AND IMPLEMENTATION

The MPH software is available at https://jiang18.github.io/mph/.

Marker Density and Models to Improve the Accuracy of Genomic Selection for Growth and Slaughter Traits in Meat Rabbits

The selection and breeding of good meat rabbit breeds are fundamental to their industrial development, and genomic selection (GS) can employ genomic information to make up for the shortcomings of traditional phenotype-based breeding methods. For the practical implementation of GS in meat rabbit breeding, it is necessary to assess different marker densities and GS models. Here, we obtained low-coverage whole-genome sequencing (lcWGS) data from 1515 meat rabbits (including parent herd and half-sibling offspring). The specific objectives were (1) to derive a baseline for heritability estimates and genomic predictions based on randomly selected marker densities and (2) to assess the accuracy of genomic predictions for single- and multiple-trait linear mixed models. We found that a marker density of 50 K can be used as a baseline for heritability estimation and genomic prediction. For GS, the multi-trait genomic best linear unbiased prediction (GBLUP) model results in more accurate predictions for virtually all traits compared to the single-trait model, with improvements greater than 15% for all of them, which may be attributed to the use of information on genetically related traits. In addition, we discovered a positive correlation between the performance of the multi-trait GBLUP and the genetic correlation between the traits. We anticipate that this approach will provide solutions for GS, as well as optimize breeding programs, in meat rabbits.

Genome-Wide Association Study Meta-Analysis Elucidates Genetic Structure and Identifies Candidate Genes of Teat Number Traits in Pigs

The teat number is a pivotal reproductive trait that significantly influences the survival rate of piglets. A meta-analysis is a robust instrument, enhancing the universality of research findings and improving statistical power by increasing the sample size. This study aimed to identify universal candidate genes associated with teat number traits using a genome-wide association study (GWAS) meta-analysis with three breeds. We identified 21 chromosome threshold significant single-nucleotide polymorphisms (SNPs) associated with five teat number traits in single-breed and cross-breed meta-GWAS analyses. Using a co-localization analysis of expression quantitative trait loci and GWAS loci, we detected four unique genes that were co-localized with cross-breed GWAS loci associated with teat number traits. Through a meta-analysis and integrative analysis, we identified more reliable candidate genes associated with multiple-breed teat number traits. Our research provides new information for exploring the genetic mechanism affecting pig teat number for breeding selection and improvement.

Genomic prediction based on selective linkage disequilibrium pruning of low-coverage whole-genome sequence variants in a pure Duroc population

BACKGROUND

Although the accumulation of whole-genome sequencing (WGS) data has accelerated the identification of mutations underlying complex traits, its impact on the accuracy of genomic predictions is limited. Reliable genotyping data and pre-selected beneficial loci can be used to improve prediction accuracy. Previously, we reported a low-coverage sequencing genotyping method that yielded 11.3 million highly accurate single-nucleotide polymorphisms (SNPs) in pigs. Here, we introduce a method termed selective linkage disequilibrium pruning (SLDP), which refines the set of SNPs that show a large gain during prediction of complex traits using whole-genome SNP data.

RESULTS

We used the SLDP method to identify and select markers among millions of SNPs based on genome-wide association study (GWAS) prior information. We evaluated the performance of SLDP with respect to three real traits and six simulated traits with varying genetic architectures using two representative models (genomic best linear unbiased prediction and BayesR) on samples from 3579 Duroc boars. SLDP was determined by testing 180 combinations of two core parameters (GWAS P-value thresholds and linkage disequilibrium r2). The parameters for each trait were optimized in the training population by five fold cross-validation and then tested in the validation population. Similar to previous GWAS prior-based methods, the performance of SLDP was mainly affected by the genetic architecture of the traits analyzed. Specifically, SLDP performed better for traits controlled by major quantitative trait loci (QTL) or a small number of quantitative trait nucleotides (QTN). Compared with two commercial SNP chips, genotyping-by-sequencing data, and an unselected whole-genome SNP panel, the SLDP strategy led to significant improvements in prediction accuracy, which ranged from 0.84 to 3.22% for real traits controlled by major or moderate QTL and from 1.23 to 11.47% for simulated traits controlled by a small number of QTN.

CONCLUSIONS

The SLDP marker selection method can be incorporated into mainstream prediction models to yield accuracy improvements for traits with a relatively simple genetic architecture, however, it has no significant advantage for traits not controlled by major QTL. The main factors that affect its performance are the genetic architecture of traits and the reliability of GWAS prior information. Our findings can facilitate the application of WGS-based genomic selection.

Evaluation of the selection of key individuals for genotype imputation in Chinese yellow-feathered chicken

Genotype imputation is a powerful technique employed by next-generation sequencing (NGS) and genotyping arrays, which can significantly enhance the cost-effectiveness and efficiency of genomic selection. The accuracy of imputation is largely determined by the choice of reference panel, with previous studies generally demonstrating that a closely related population as a reference panel leads to greater accuracy than a more distantly related population. Various strategies have been proposed for selecting desirable individuals via targeted resequencing, but their efficiencies need further improvement. In this study, we present a practical broiler selection methodology for a local Chinese chicken line that integrates established methods based on pedigree, genomics, and random sampling, and leverages genotype and pedigree information from the yellow-plumage dwarf chicken line. The efficacy of these selection strategies was assessed by evaluating their ability to accurately impute masked genotypes from data obtained using a 600K chip. Our findings reveal that the pedigree-based method yields superior accuracy in genotype imputation, whereas the haplotype-based method exhibits greater stability. Nonetheless, the impact of these targeted methods for selecting key individuals is slightly different when initiating a new sequencing project in a production context. Overall, this study highlights the advantages of using the pedigree-based approach as the preferred method for optimizing genotype imputation in broiler chickens.

GWLD: an R package for genome-wide linkage disequilibrium analysis

Linkage disequilibrium (LD) analysis is fundamental to the investigation of the genetic architecture of complex traits (e.g. human disease, animal and plant breeding) and population structure and evolution dynamics. However, until now, studies primarily focus on LD status between genetic variants located on the same chromosome. Moreover, genome (re)sequencing produces unprecedented numbers of genetic variants, and fast LD computation becomes a challenge. Here, we have developed GWLD, a parallelized and generalized tool designed for the rapid genome-wide calculation of LD values, including conventional D/D', r2, and (reduced) mutual information (MI and RMI) measures. LD between genetic variants within and across chromosomes can be rapidly computed and visualized in either an R package or a standalone C++ software package. To evaluate the accuracy and speed of LD calculation, we conducted comparisons using 4 real datasets. Interchromosomal LD patterns observed potentially reflect levels of selection intensity across different species. Both versions of GWLD, the R package (https://github.com/Rong-Zh/GWLD/GWLD-R) and the standalone C++ software (https://github.com/Rong-Zh/GWLD/GWLD-C++), are freely available on GitHub.

DeepSATA: A Deep Learning-Based Sequence Analyzer Incorporating the Transcription Factor Binding Affinity to Dissect the Effects of Non-Coding Genetic Variants

Utilizing large-scale epigenomics data, deep learning tools can predict the regulatory activity of genomic sequences, annotate non-coding genetic variants, and uncover mechanisms behind complex traits. However, these tools primarily rely on human or mouse data for training, limiting their performance when applied to other species. Furthermore, the limited exploration of many species, particularly in the case of livestock, has led to a scarcity of comprehensive and high-quality epigenetic data, posing challenges in developing reliable deep learning models for decoding their non-coding genomes. The cross-species prediction of the regulatory genome can be achieved by leveraging publicly available data from extensively studied organisms and making use of the conserved DNA binding preferences of transcription factors within the same tissue. In this study, we introduced DeepSATA, a novel deep learning-based sequence analyzer that incorporates the transcription factor binding affinity for the cross-species prediction of chromatin accessibility. By applying DeepSATA to analyze the genomes of pigs, chickens, cattle, humans, and mice, we demonstrated its ability to improve the prediction accuracy of chromatin accessibility and achieve reliable cross-species predictions in animals. Additionally, we showcased its effectiveness in analyzing pig genetic variants associated with economic traits and in increasing the accuracy of genomic predictions. Overall, our study presents a valuable tool to explore the epigenomic landscape of various species and pinpoint regulatory deoxyribonucleic acid (DNA) variants associated with complex traits.

Genome-Wide Association Study of Body Conformation Traits in a Three-Way Crossbred Commercial Pig Population

Body conformation is the most direct production index, which can fully reflect pig growth status and is closely related to critical economic traits. In this study, we conducted a genome-wide association study (GWAS) on body conformation traits in a population of 1518 Duroc × (Landrace × Yorkshire) commercial pigs. These traits included body length (BL), body height (BH), chest circumference (CC), abdominal circumference (AC), and waist circumference (WC). Both the mixed linear model (MLM) and fixed and random model circulating probability unification (FarmCPU) approaches were employed for the analysis. Our findings revealed 60 significant single nucleotide polymorphisms (SNPs) associated with these body conformation traits in the crossbred pig population. Specifically, sixteen SNPs were significantly associated with BL, three SNPs with BH, thirteen SNPs with CC, twelve SNPs with AC, and sixteen SNPs with WC. Moreover, we identified several promising candidate genes located within the genomic regions associated with body conformation traits. These candidate genes include INTS10, KIRREL3, SOX21, BMP2, MAP4K3, SOD3, FAM160B1, ATL2, SPRED2, SEC16B, and RASAL2. Furthermore, our analysis revealed a novel significant quantitative trait locus (QTL) on SSC7 specifically associated with waist circumference, spanning an 84 kb interval. Overall, the identification of these significant SNPs and potential candidate genes in crossbred commercial pigs enhances our understanding of the genetic basis underlying body conformation traits. Additionally, these findings provide valuable genetic resources for pig breeding programs.

A genome-wide association study for loin depth and muscle pH in pigs from intensely selected purebred lines

BACKGROUND

Genome-wide association studies (GWAS) aim at identifying genomic regions involved in phenotype expression, but identifying causative variants is difficult. Pig Combined Annotation Dependent Depletion (pCADD) scores provide a measure of the predicted consequences of genetic variants. Incorporating pCADD into the GWAS pipeline may help their identification. Our objective was to identify genomic regions associated with loin depth and muscle pH, and identify regions of interest for fine-mapping and further experimental work. Genotypes for ~ 40,000 single nucleotide morphisms (SNPs) were used to perform GWAS for these two traits, using de-regressed breeding values (dEBV) for 329,964 pigs from four commercial lines. Imputed sequence data was used to identify SNPs in strong ([Formula: see text] 0.80) linkage disequilibrium with lead GWAS SNPs with the highest pCADD scores.

RESULTS

Fifteen distinct regions were associated with loin depth and one with loin pH at genome-wide significance. Regions on chromosomes 1, 2, 5, 7, and 16, explained between 0.06 and 3.55% of the additive genetic variance and were strongly associated with loin depth. Only a small part of the additive genetic variance in muscle pH was attributed to SNPs. The results of our pCADD analysis suggests that high-scoring pCADD variants are enriched for missense mutations. Two close but distinct regions on SSC1 were associated with loin depth, and pCADD identified the previously identified missense variant within the MC4R gene for one of the lines. For loin pH, pCADD identified a synonymous variant in the RNF25 gene (SSC15) as the most likely candidate for the muscle pH association. The missense mutation in the PRKAG3 gene known to affect glycogen content was not prioritised by pCADD for loin pH.

CONCLUSIONS

For loin depth, we identified several strong candidate regions for further statistical fine-mapping that are supported in the literature, and two novel regions. For loin muscle pH, we identified one previously identified associated region. We found mixed evidence for the utility of pCADD as an extension of heuristic fine-mapping. The next step is to perform more sophisticated fine-mapping and expression quantitative trait loci (eQTL) analysis, and then interrogate candidate variants in vitro by perturbation-CRISPR assays.

Serum metabolic profile and metabolome genome-wide association study in chicken

BACKGROUND

Chickens provide globally important livestock products. Understanding the genetic and molecular mechanisms underpinning chicken economic traits is crucial for improving their selective breeding. Influenced by a combination of genetic and environmental factors, metabolites are the ultimate expression of physiological processes and can provide key insights into livestock economic traits. However, the serum metabolite profile and genetic architecture of the metabolome in chickens have not been well studied.

RESULTS

Here, comprehensive metabolome detection was performed using non-targeted LC-MS/MS on serum from a chicken advanced intercross line (AIL). In total, 7,191 metabolites were used to construct a chicken serum metabolomics dataset and to comprehensively characterize the serum metabolism of the chicken AIL population. Regulatory loci affecting metabolites were identified in a metabolome genome-wide association study (mGWAS). There were 10,061 significant SNPs associated with 253 metabolites that were widely distributed across the entire chicken genome. Many functional genes affect metabolite synthesis, metabolism, and regulation. We highlight the key roles of TDH and AASS in amino acids, and ABCB1 and CD36 in lipids.

CONCLUSIONS

We constructed a chicken serum metabolite dataset containing 7,191 metabolites to provide a reference for future chicken metabolome characterization work. Meanwhile, we used mGWAS to analyze the genetic basis of chicken metabolic traits and metabolites and to improve chicken breeding.

An atlas of regulatory elements in chicken: A resource for chicken genetics and genomics

A comprehensive characterization of regulatory elements in the chicken genome across tissues will have substantial impacts on both fundamental and applied research. Here, we systematically identified and characterized regulatory elements in the chicken genome by integrating 377 genome-wide sequencing datasets from 23 adult tissues. In total, we annotated 1.57 million regulatory elements, representing 15 distinct chromatin states, and predicted about 1.2 million enhancer-gene pairs and 7662 super-enhancers. This functional annotation of the chicken genome should have wide utility on identifying regulatory elements accounting for gene regulation underlying domestication, selection, and complex trait regulation, which we explored. In short, this comprehensive atlas of regulatory elements provides the scientific community with a valuable resource for chicken genetics and genomics.

Genome-wide association studies for additive and dominance effects for body composition traits in commercial crossbred Piétrain pigs

Fat depth (FD) and muscle depth (MD) are economically important traits and used to estimate carcass lean content (LMP), which is one of the main breeding objectives in pig breeding programmes. We assessed the genetic architectures of body composition traits for additive and dominance effects in commercial crossbred Piétrain pigs using both 50 K array and sequence genotypes. We first performed a genome-wide association study (GWAS) using single-marker association analysis with a false discovery rate of 0.1. Then, we estimated the additive and dominance effects of the most significant variant in the quantitative trait loci (QTL) regions. It was investigated whether the use of whole-genome sequence (WGS) will improve the QTL detection (both additive and dominance) with a higher power compared with lower density SNP arrays. Our results showed that more QTL regions were detected by WGS compared with 50 K array (n = 54 vs. n = 17). Of the novel associated regions associated with FD and LMP and detected by WGS, the most pronounced peak was on SSC13, situated at ~116-118, 121-127 and 129-134 Mbp. Additionally, we found that only additive effects contributed to the genetic architecture of the analysed traits and no significant dominance effects were found for the tested SNPs at QTL regions, regardless of panel density. The associated SNPs are located in or near several relevant candidate genes. Of these genes, GABRR2, GALR1, RNGTT, CDH20 and MC4R have been previously reported as being associated with fat deposition traits. However, the genes on SSC1 (ZNF292, ORC3, CNR1, SRSF12, MDN1, TSHZ1, RELCH and RNF152) and SSC18 (TTC26 and KIAA1549) have not been reported previously to our best knowledge. Our current findings provide insights into the genomic regions influencing composition traits in Piétrain pigs.

Combining genome-wide association study based on low-coverage whole genome sequencing and transcriptome analysis to reveal the key candidate genes affecting meat color in pigs

Meat color is an attractive trait that influences consumers' purchase decisions at the point of sale. To decipher the genetic basis of meat color traits, we performed a genome-wide association study based on low-coverage whole-genome sequencing. In total, 669 (Pietrain × Duroc) × (Landrace × Yorkshire) pigs were genotyped using low-coverage whole-genome sequencing. Single nucleotide polymorphism (SNP) calling and genotype imputation were performed using the BaseVar + STITCH channel. Six individuals with an average depth of 12.05× whole-genome resequencing were randomly selected to assess the accuracy of imputation. Heritability evaluation and genome-wide association study for meat color traits were conducted. Functional enrichment analysis of the candidate genes from genome-wide association study and integration analysis with our previous transcriptome data were conducted. The imputation accuracy parameters, allele frequency R² , concordance rate, and dosage R² were 0.959, 0.952, and 0.933, respectively. The heritability values of a*_45 min , b*_45 min , L*_45 min , C*, and H⁰ were 0.19, 0.11, 0.06, 0.16, and 0.26, respectively. In total, 3884 significant SNPs and 15 QTL, corresponding to 382 genes, were associated with meat color traits. Functional enrichment analysis revealed that 10 genes were the potential candidates for regulating meat color. Moreover, integration analysis revealed that DMRT2, EFNA5, FGF10, and COL11A2 were the most promising candidates affecting meat color. In summary, this study provides new insights into the molecular basis of meat color traits, and provides a new theoretical basis for the molecular breeding of meat color traits in pigs.

Chicken chromatin accessibility atlas accelerates epigenetic annotation of birds and gene fine-mapping associated with growth traits

The development of epigenetic maps, such as the ENCODE project in humans, provides resources for gene regulation studies and a reference for research of disease-related regulatory elements. However, epigenetic information, such as a bird-specific chromatin accessibility atlas, is currently lacking for the thousands of bird species currently described. The major genomic difference between birds and mammals is their shorter introns and intergenic distances, which seriously hinders the use of humans and mice as a reference for studying the function of important regulatory regions in birds. In this study, using chicken as a model bird species, we systematically compiled a chicken chromatin accessibility atlas using 53 Assay of Transposase Accessible Chromatin sequencing (ATAC-seq) samples across 11 tissues. An average of 50 796 open chromatin regions were identified per sample, cumulatively accounting for 20.36% of the chicken genome. Tissue specificity was largely reflected by differences in intergenic and intronic peaks, with specific functional regulation achieved by two mechanisms: recruitment of several sequence-specific transcription factors and direct regulation of adjacent functional genes. By integrating data from genome-wide association studies, our results suggest that chicken body weight is driven by different regulatory variants active in growth-relevant tissues. We propose CAB39L (active in the duodenum), RCBTB1 (muscle and liver), and novel long non-coding RNA ENSGALG00000053256 (bone) as candidate genes regulating chicken body weight. Overall, this study demonstrates the value of epigenetic data in fine-mapping functional variants and provides a compendium of resources for further research on the epigenetics and evolution of birds and mammals.

Polymorphisms in SHISA3 and RFC3 genes and their association with feed conversion ratio in Hu sheep

In animal husbandry, feed efficiency is a crucial economic trait. In this study, the general linear model was used to perform association analysis for various genotypes and feed conversion ratio (FCR)-related traits. Reverse transcription-quantitative PCR (RT-qPCR) was used to detect the expression of SHISA3 and RFC3 mRNA levels in 10 tissues from 6 sheep. The results showed that SNPs in the NC_040257.1:c.625 T > C and NC_040261.1:g.9905 T > C were analyzed whether they were associated to feed efficiency parameters in Hu sheep (body weight, feed intake, average daily growth, and feed conversion ratio). NC_040257.1:c.625 T > C was shown to be significantly associated with body weight at 80, 100, and 120 days as well as feed conversion ratio (P < 0.05), whereas NC_040261.1:g.9905 T > C was found to be significantly associated with average daily weight gain from 80-140 days (ADG80-140) and FCR (P < 0.05). In Hu sheep, the CC genotypes of SHISA3 and RFC3 were the most common genotypes related to feed efficiency traits. Furthermore, the feed conversion ratio of the combined genotypes TT ^SHISA3-CC ^RFC3, TT ^SHISA3-CT ^RFC3, TT ^SHISA3-TT ^RFC3, CT ^SHISA3-CC ^RFC3 and CT ^SHISA3-CT ^RFC3 was significantly better than the FCR of CC ^SHISA3-TT ^RFC3. RT-qPCR results showed that the expression levels of SHISA3 were lower in the lung than in spleen, kidney, muscle and lymph (P < 0.05), and RFC3 was the lung had a highly significant higher expression level than the heart, liver, spleen, and muscle (P < 0.01). In conclusion, SHISA3 and RFC3 polymorphisms can be used as genetic markers for improving feed conversion efficiency in Hu sheep.

Cost-effectively dissecting the genetic architecture of complex wool traits in rabbits by low-coverage sequencing

Background

Rabbit wool traits are important in fiber production and for model organism research on hair growth, but their genetic architecture remains obscure. In this study, we focused on wool characteristics in Angora rabbits, a breed well-known for the quality of its wool. Considering the cost to generate population-scale sequence data and the biased detection of variants using chip data, developing an effective genotyping strategy using low-coverage whole-genome sequencing (LCS) data is necessary to conduct genetic analyses.

Results

Different genotype imputation strategies (BaseVar + STITCH, Bcftools + Beagle4, and GATK + Beagle5), sequencing coverages (0.1X, 0.5X, 1.0X, 1.5X, and 2.0X), and sample sizes (100, 200, 300, 400, 500, and 600) were compared. Our results showed that using BaseVar + STITCH at a sequencing depth of 1.0X with a sample size larger than 300 resulted in the highest genotyping accuracy, with a genotype concordance higher than 98.8% and genotype accuracy higher than 0.97. We performed multivariate genome-wide association studies (GWAS), followed by conditional GWAS and estimation of the confidence intervals of quantitative trait loci (QTL) to investigate the genetic architecture of wool traits. Six QTL were detected, which explained 0.4 to 7.5% of the phenotypic variation. Gene-level mapping identified the fibroblast growth factor 10 (FGF10) gene as associated with fiber growth and diameter, which agrees with previous results from functional data analyses on the FGF gene family in other species, and is relevant for wool rabbit breeding.

Conclusions

We suggest that LCS followed by imputation can be a cost-effective alternative to array and high-depth sequencing for assessing common variants. GWAS combined with LCS can identify new QTL and candidate genes that are associated with quantitative traits. This study provides a cost-effective and powerful method for investigating the genetic architecture of complex traits, which will be useful for genomic breeding applications.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12711-022-00766-y.

Imputation to whole-genome sequence and its use in genome-wide association studies for pork colour traits in crossbred and purebred pigs

Imputed whole-genome sequence (WGS) has been proposed to improve genome-wide association studies (GWAS), since all causative mutations responsible for phenotypic variation are expected to be present in the data. This approach was applied on a large number of purebred (PB) and crossbred (CB) pigs for 18 pork color traits to evaluate the impact of using imputed WGS relative to medium-density marker panels. The traits included Minolta A*, B*, and L* for fat (FCOL), quadriceps femoris muscle (QFCOL), thawed loin muscle (TMCOL), fresh ham gluteus medius (GMCOL), ham iliopsoas muscle (ICOL), and longissimus dorsi muscle on the fresh loin (FMCOL). Sequence variants were imputed from a medium-density marker panel (61K for CBs and 50K for PBs) in all genotyped pigs using BeagleV5.0. We obtained high imputation accuracy (average of 0.97 for PBs and 0.91 for CBs). GWAS were conducted for three datasets: 954 CBs and 891 PBs, and the combined CBs and PBs. For most traits, no significant associations were detected, regardless of panel density or population type. However, quantitative trait loci (QTL) regions were only found for a few traits including TMCOL Minolta A* and GMCOL Minolta B* (CBs), FMCOL Minolta B*, FMCOL Minolta L*, and ICOL Minolta B* (PBs) and FMCOL Minolta A*, FMCOL Minolta B*, GMCOL Minolta B*, and ICOL Minolta B* (Combined dataset). More QTL regions were identified with WGS (n = 58) relative to medium-density marker panels (n = 22). Most of the QTL were linked to previously reported QTLs or candidate genes that have been previously reported to be associated with meat quality, pH and pork color; e.g., VIL1, PRKAG3, TTLL4, and SLC11A1, USP37. CTDSP1 gene on SSC15 has not been previously associated with meat color traits in pigs. The findings suggest any added value of WGS was only for detecting novel QTL regions when the sample size is sufficiently large as with the Combined dataset in this study. The percentage of phenotypic variance explained by the most significant SNPs also increased with WGS compared with medium-density panels. The results provide additional insights into identification of a number of candidate regions and genes for pork color traits in different pig populations.

Genomic prediction with whole-genome sequence data in intensely selected pig lines

Background

Early simulations indicated that whole-genome sequence data (WGS) could improve the accuracy of genomic predictions within and across breeds. However, empirical results have been ambiguous so far. Large datasets that capture most of the genomic diversity in a population must be assembled so that allele substitution effects are estimated with high accuracy. The objectives of this study were to use a large pig dataset from seven intensely selected lines to assess the benefits of using WGS for genomic prediction compared to using commercial marker arrays and to identify scenarios in which WGS provides the largest advantage.

Methods

We sequenced 6931 individuals from seven commercial pig lines with different numerical sizes. Genotypes of 32.8 million variants were imputed for 396,100 individuals (17,224 to 104,661 per line). We used BayesR to perform genomic prediction for eight complex traits. Genomic predictions were performed using either data from a standard marker array or variants preselected from WGS based on association tests.

Results

The accuracies of genomic predictions based on preselected WGS variants were not robust across traits and lines and the improvements in prediction accuracy that we achieved so far with WGS compared to standard marker arrays were generally small. The most favourable results for WGS were obtained when the largest training sets were available and standard marker arrays were augmented with preselected variants with statistically significant associations to the trait. With this method and training sets of around 80k individuals, the accuracy of within-line genomic predictions was on average improved by 0.025. With multi-line training sets, improvements of 0.04 compared to marker arrays could be expected.

Conclusions

Our results showed that WGS has limited potential to improve the accuracy of genomic predictions compared to marker arrays in intensely selected pig lines. Thus, although we expect that larger improvements in accuracy from the use of WGS are possible with a combination of larger training sets and optimised pipelines for generating and analysing such datasets, the use of WGS in the current implementations of genomic prediction should be carefully evaluated against the cost of large-scale WGS data on a case-by-case basis.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12711-022-00756-0.

Exploring the optimal strategy of imputation from SNP array to whole-genome sequencing data in farm animals

Genotype imputation from BeadChip to whole-genome sequencing (WGS) data is a cost-effective method of obtaining genotypes of WGS variants. Beagle, one of the most popular imputation software programs, has been widely used for genotype inference in humans and non-human species. A few studies have systematically and comprehensively compared the performance of beagle versions and parameter settings of farm animals. Here, we investigated the imputation performance of three representative versions of Beagle (Beagle 4.1, Beagle 5.0, and Beagle 5.4), and the effective population size (Ne) parameter setting for three species (cattle, pig, and chicken). Six scenarios were investigated to explore the impact of certain key factors on imputation performance. The results showed that the default Ne (1,000,000) is not suitable for livestock and poultry in small reference or low-density arrays of target panels, with 2.47%–10.45% drops in accuracy. Beagle 5 significantly reduced the computation time (4.66-fold–13.24-fold) without an accuracy loss. In addition, using a large combined-reference panel or high-density chip provides greater imputation accuracy, especially for low minor allele frequency (MAF) variants. Finally, a highly significant correlation in the measures of imputation accuracy can be obtained with an MAF equal to or greater than 0.05.

Genome-Wide Association Study Identified a Quantitative Trait Locus and Two Candidate Genes on Sus scrofa Chromosome 2 Affecting Vulvar Traits of Suhuai Pigs

Vulvar size and angle are meaningful traits in pig production. Sows with abnormal vulva generally show reproductive disorders. In order to excavate candidate loci and genes associated with pig’s vulvar traits, 270 Suhuai pigs with vulvar phenotype were genotyped by a porcine single nucleotide polymorphisms (SNP) Chip. Then, Chip data were imputed using resequenced data of 30 Suhuai pigs as a reference panel. Next, we estimated the heritability and performed a genome-wide association study (GWAS) for vulvar traits. The heritabilities for the traits vulvar length (VL), vulvar width (VW) and vulvar angle (VA) in this pig population were 0.23, 0.32 and 0.22, respectively. GWAS based on Chip data identified nine significant SNPs on the Sus scrofa chromosomes (SSC) 2, 7, 9 and 13 for VL or VW. GWAS based on imputed data identified 11 new quantitative trait loci (QTL) on SSC1, 2, 7, 8, 9, 11, 13, 16 and 17 for VL or VW. The most significant QTL for VL on SSC2 were refined to a 3.48–3.97 Mb region using linkage disequilibrium and linkage analysis (LDLA). In this refined region, FGF19 and CCND1, involved in the development of the reproductive tract, cell growth and vulvar cancer, could be new candidate genes affecting VL. Our results provided potential genetic markers for the breeding of vulvar traits in pigs and deepened the understanding of the genetic mechanism of vulvar traits.

Enhancer-promoter interaction maps provide insights into skeletal muscle-related traits in pig genome

Background

Gene expression programs are intimately linked to the interplay of active cis regulatory elements mediated by chromatin contacts and associated RNAs. Genome-wide association studies (GWAS) have identified many variants in these regulatory elements that can contribute to phenotypic diversity. However, the functional interpretation of these variants remains nontrivial due to the lack of chromatin contact information or limited contact resolution. Furthermore, the distribution and role of chromatin-associated RNAs in gene expression and chromatin conformation remain poorly understood. To address this, we first present a comprehensive interaction map of nuclear dynamics of 3D chromatin-chromatin interactions (H3K27ac BL-HiChIP) and RNA-chromatin interactions (GRID-seq) to reveal genomic variants that contribute to complex skeletal muscle traits.

Results

In a genome-wide scan, we provide systematic fine mapping and gene prioritization from GWAS leading signals that underlie phenotypic variability of growth rate, meat quality, and carcass performance. A set of candidate functional variants and 54 target genes previously not detected were identified, with 71% of these candidate functional variants choosing to skip over their nearest gene to regulate the target gene in a long-range manner. The effects of three functional variants regulating KLF6 (related to days to 100 kg), MXRA8 (related to lean meat percentage), and TAF11 (related to loin muscle depth) were observed in two pig populations. Moreover, we find that this multi-omics interaction map consists of functional communities that are enriched in specific biological functions, and GWAS target genes can serve as core genes for exploring peripheral trait-relevant genes.

Conclusions

Our results provide a valuable resource of candidate functional variants for complex skeletal muscle-related traits and establish an integrated approach to complement existing 3D genomics by exploiting RNA-chromatin and chromatin-chromatin interactions for future association studies.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12915-022-01322-2.

The construction of a haplotype reference panel using extremely low coverage whole genome sequences and its application in genome-wide association studies and genomic prediction in Duroc pigs

Extremely low coverage whole genome sequencing (lcWGS) is an economical technique to obtain high-density single nucleotide polymorphisms (SNPs). Here, we explored the feasibility of constructing a haplotype reference panel (lcHRP) using lcWGS and evaluated the effects of lcHRP through a genome-wide association study (GWAS) and genomic prediction in pigs. A total of 297 and 974 Duroc pigs were genotyped using lcWGS and a 50 K SNP array, respectively. We obtained 19,306,498 SNPs using lcWGS with an accuracy of 0.984. With the help of lcHRP, the accuracy of imputation from the SNP array to lcWGS was 0.922. Compared to the SNP array findings, those from the imputation-based GWAS identified more signals across four traits. With the integration of the top 1% imputation-based GWAS findings as genomic features, the accuracies of genomic prediction was improved by 6.0% to 13.2%. This study showed the great potential of lcWGS in pigs' molecular breeding.

Accelerated deciphering of the genetic architecture of agricultural economic traits in pigs using a low-coverage whole-genome sequencing strategy

BACKGROUND

Uncovering the genetic architecture of economic traits in pigs is important for agricultural breeding. However, high-density haplotype reference panels are unavailable in most agricultural species, limiting accurate genotype imputation in large populations. Moreover, the infinitesimal model of quantitative traits implies that weak association signals tend to be spread across most of the genome, further complicating the genetic analysis. Hence, there is a need to develop new methods for sequencing large cohorts without large reference panels.

RESULTS

We describe a Tn5-based highly accurate, cost- and time-efficient, low-coverage sequencing method to obtain 11.3 million whole-genome single-nucleotide polymorphisms in 2,869 Duroc boars at a mean depth of 0.73×. On the basis of these single-nucleotide polymorphisms, a genome-wide association study was performed, resulting in 14 quantitative trait loci (QTLs) for 7 of 21 important agricultural traits in pigs. These QTLs harbour genes, such as ABCD4 for total teat number and HMGA1 for back fat thickness, and provided a starting point for further investigation. The inheritance models of the different traits varied greatly. Most follow the minor-polygene model, but this can be attributed to different reasons, such as the shaping of genetic architecture by artificial selection for this population and sufficiently interconnected minor gene regulatory networks.

CONCLUSIONS

Genome-wide association study results for 21 important agricultural traits identified 14 QTLs/genes and showed their genetic architectures, providing guidance for genetic improvement harnessing genomic features. The Tn5-based low-coverage sequencing method can be applied to large-scale genome studies for any species without a good reference panel and can be used for agricultural breeding.