Stability-Indicating RP-HPLC Method Development and Validation for Eltrombopag Olamine in the Presence of Impurities and Degradation Products. Robustness by Design of Expert Software

Quality by design-aided acid-free synthesis of self P, N, S-doped black seed-derived carbon quantum dots for application as a nanosensor for eltrombopag environmental and bioanalysis and pharmacokinetic assay

Herein, we developed a rapid, one-step, and cost-effective methodology based on the fabrication of water-soluble self-nitrogen, sulfur, and phosphorus co-doped black seed carbon quantum dots (BSQDs) via microwaveirradiation in six minutes. Our synthesis approach is superior to those in the literature as they involved long-time heating (12 h) with sulfuric acid and sodium hydroxide and/or high temperatures (200 °C). A full factorial design was applied to obtain the most efficient synthesis conditions.BSQDs displayed excitation-independent emissions, demonstrating the purity of the synthesized BSQDs, with a maximum fluorescence at 425 nm after excitation at 310 nm. Eltrombopag olamine is an anti-thrombocytopenia drug that is also reported to cause toxicity in river water based on its Persistence, Bioaccumulation, and Toxicity (PBT). The synthesized BSQDs were employed as the first fluorometric sensor for environmental and bioanalysis of eltrombopag. The fluorescence of BSQDs decreased with increasing concentrations of eltrombopag, with excellent selectivity and sensitivity down to 30 ppb. BSQDs were successfully applied as sensing probes for the detection of eltrombopag in medical tablets, spiked and real human plasma samples, and river water samples, with an overall recovery of at least 97 %. The good tolerance to high levels of foreign components and co-administered drugs indicates good selectivity and versatility of the proposed methodology. Plasma pharmacokinetic parameters such as t1/2, Cmax, and t max of eltrombopag were evaluated to be 9.91 h, 16.0 μg mL-1, and 5 h, respectively. Moreover, the green character of the BSQDs as a sensor was proved by various analytical greenness scales.

Impurity assessment, development and validation of an RP-HPLC method for the determination of eleven potential impurities of eltrombopag precursor

Eltrombopag is an oral non-peptide thrombopoietin receptor (TPO-R) agonist indicated for the treatment of thrombocytopenia in patients with persistent or chronic immune thrombocytopenia (idiopathic thrombocytopenic purpura, ITP) or chronic hepatitis C infection and the treatment of severe aplastic anemia. The purpose of this research was to assess the possible impurities that may carry over to eltrombopag from its precursor Eltro-1 (3'-amino-2'-hydroxy-[1,1'-biphenyl]-3-carboxylic acid) and to develop a specific analytical method for the determination of these impurities. Eltro-1 samples synthesized by two different synthesis routes were investigated during the evaluation and method development studies. Besides the expected process-related impurities (Eltro-1A - Eltro-1J), e.g., starting materials, intermediates, and/or compounds formed from their further reactions, an unknown impurity detected above 0.10% was identified by LC-MS, synthesized and fully characterized by NMR, MS and FTIR (Eltro-1K). Accordingly, an HPLC-RP method for the determination of eleven impurities (Eltro-1A - Eltro-1K) in Eltro-1 was developed and validated according to ICH Q2. The control limits for impurities in Eltro-1 were set at ≤ 0.15% for Eltro-1A - Eltro-1J and ≤ 1.0% for Eltro-1K based on fate, spike-purge and carryover studies and in accordance with the ICH M7 classification for impurities in drug substance. Eltro-1 and eleven impurities at the specification limit were separated from each other and the diluent peaks with sufficient resolution without interference. Separation was performed on a Waters XBridge C18 column (150 × 4.6 mm, 3.5 μm) at 40 °C with a 10 µL injection volume at a detection wavelength of 220 nm and 15 °C sample temperature. The gradient elution is performed at a flow rate of 1.0 mL/min for 40 min with mobile phase A (0.1% orthophosphoric acid in water) and B (acetonitrile) according to the following program: Time (min) / Acetonitrile (%): 0/0, 35/70, 36/0, 40/0. Test and standard solutions were prepared at a concentration of 1.0 mg/mL and 1.0 µg/mL, respectively, using a mixture of mobile phase A and acetonitrile (75/25) as diluent. This is the first specific, selective, sensitive, linear, precise, accurate, and robust HPLC method for the determination of Eltro-1A - Eltro-1K in Eltro-1, which showed no significant degradation under thermal stress, photostability (UV and VIS), and standard accelerated and long-term stability conditions.

Rapid, Simple and Low-Cost Analytical Method Development for Quantification of Eltrombopag Olamine in Tablet Dosage by UV Spectroscopy Method

BACKGROUND

Eltrombopag Olamine is a drug used to treat thrombocytopenia, a disorder where blood platelet counts get lower and severe aplastic anemia. It serves as a thrombopoietin receptor agonist, which give rise to platelet production in the bone marrow.

OBJECTIVES

The objective of this study is to develop a simple, specific, accurate, precise and economical Ultraviolet spectroscopy method to estimate the amount of Eltrombopag Olamine in bulk and tablet dosage form.

METHODS

The developed method was performed using methanol for identification and physicochemical characterization of the drug. The validation parameters like linearity, precision, accuracy, robustness limits of detection and quantitation, and specificity were assessed as per ICH Q2 (R2).

RESULTS

The maximum absorbance wavelength (λmax) of the drug was found at 247 nm in methanol. The linearity was found in the concentration range of 2-14 μg/ml with regression equation y = 0.0619x - 0.0123 and r² = 0.999. The standard addition method was used to determine the accuracy of the developed method. The result was found in the % recovery range of 98-99%. The precision was done on λmax with respect to the parameters such as repeatability, intraday, and interday. The method was found to be precise as the % RSD value was found to be <2%. The detection limit value (LOD) and quantitation limit value (LOQ) were 0.0524 μg/ml and 0.1588 μg/ml, respectively.

CONCLUSION

The developed method is simple, economical, accurate and selective. The developed method was adaptable for the estimation of Eltrombopag Olamine analysis in pharmaceutical dosage form and routine quality control laboratory.

Quality by design tool-evaluated stability-indicating ultra-performance liquid chromatography method for the determination of drugs (ritonavir and darunavir) used to treat the human immunodeficiency virus/acquired immunodeficiency syndrome

Ritonavir and darunavir were examined using a ultra-performance liquid chromatography (UPLC) approach in pharmaceutical dosage forms. The small number of analytical studies that are currently available do not demonstrate the method's stability or nature. The study sought to assess both chemicals using a stability-indicating approach with a relatively short run time. The HSS C18 (100 × 2.1 mm), 2-mm column was used for the chromatographic separation, and isocratic elution was used to achieve this. In the mobile phase, methanol and 0.01 M phosphate buffer (pH 4.0) were included in a 60:40 (v/v) ratio. Throughout the analysis, the flow rate was kept at 0.2 mL min-1 , and a photodiode array detector set to 266 nm was used to find the major components. The proposed method showed a linear response (r2  > 0.999), and the accuracy was between 98.0% and 102.0%. The precision data showed relative standard deviation ≤1.0%. The UPLC method for quantification of ritonavir and darunavir in pharmaceutical dosage forms using a very short run time of under a minute is the subject of the proposed article. To meet current regulatory criteria, the quality by design idea was used in the method performance verification.

QbD-based stability-indicating liquid chromatography (RP-HPLC) method for the determination of flurbiprofen in cataplasm

A nonsteroidal drug called flurbiprofen (FBN) has analgesic, anti-inflammatory and antipyretic activity. Currently the determination of FBN in cataplasm does not have any pharmacopeial method. However, the drug substance, tablet and ophthalmic solution formulations do have pharmacopeial methods. The development and validation of an accurate, precise and stability-indicating analytical method for the determination of FBN in cataplasm formulations is reported. The gradient method was employed for the quantification of FBN in the presence of internal standards such as biphenyl. A nonpolar separation phase (C₁₈ , 250 × 4.6 mm, 5 μm Inertsil column; GL Sciences) was used. The optimal flow rate, column oven temperature, injection volume and detector wavelengths were 1.0 ml/min, 40°C, 20 μl and 245 nm, respectively. Mobile phase A was a mixture of water and glacial acetic acid (30:1 v/v) pH adjusted to 2.20 with glacial acetic acid or 1 m NaOH; mobile phase B was methanol (100%). The gradient elution program was [time (min)/% B]: 5/60, 20/70, 25/70, 30/60 and 40/60. The obtained RSDs for the precision and intermediate precision were 0.7 and 0.5%. The percentage recovery ranged from 99.2 to 100.4%. The linear regression coefficient >0.9996 indicates that all peak responses were linear with the concentration. The sample and standard solutions were stable for up to 24 h on the benchtop and in the refrigerator. The critical peaks were well separated from the generated peaks owing to forced degradation, including diluent and placebo peaks. The method validation data and quality by design-based robustness study results indicate that the developed method is robust and fit for routine use in the quality control laboratory. The proposed method is specific, accurate and precise, and the quality by design utilized the first method for the determination of FBN in cataplasm formulations. Transdermal patches and gels have low extraction capacity and this method is applicable for quantification.