Characterizing the amount and variability of intramuscular fat deposition throughout pork loins using barrows and gilts from two sire lines

Do carcass traits influence consumer perception of pork eating quality?

The objective of this study was to assess carcass traits' influence on pork eating quality as evaluated by consumers. A total of 1360 pork chops were used, with 824 from the sirloin end and 536 from the butt end of the loin (Longissimuss thoracis et lumborum), to produce 340 packages, each containing four pork chops. Untrained participants received one package of either sirloin or butt chops, being two pork chops from barrows and two from gilts. Participants answered a survey rating the tenderness, juiciness, flavour, and overall acceptability of each chop on an 8-point scale. Correlation analysis was conducted between carcass traits and pork eating quality attributes. For the descriptive analysis, classes (low, medium, and high) for carcass traits, Warner-Bratzler shear force (WBSF) and cooking loss were created based on our consumer responses dataset for palatability attributes. No significant correlations (P > 0.05) were observed between carcass traits and pork eating quality traits. Tenderness and overall acceptability were negatively correlated (P < 0.05) with cooking loss and WBSF. Loin intramuscular fat (IMF) content showed a weak negative correlation (P < 0.05) with WBSF and cooking loss. Consumers rated chops from the high and medium/high backfat thickness and loin IMF classes slightly higher for tenderness and juiciness, respectively. Additionally, chops from the low and/or medium WBSF and cooking loss classes received slightly higher scores for tenderness and juiciness than pork chops in the high classes. In conclusion, the study indicated that carcass traits had minimal impact on overall acceptability of pork by consumers.

Pork muscle profiling: pH and instrumental color of the longissimus thoracis is not representative of pH and instrumental color of shoulder and ham muscles

From a population of 351 pork carcasses, 3.0-cm thick chops from the 10th rib location of the longissimus thoracis, faced surfaces of the triceps brachii and serratus ventralis muscles from the boneless shoulder, and faced surfaces of the biceps femoris, semitendinosus, semimembranosus, adductor, rectus femoris, and vastus lateralis muscles from the boneless ham were evaluated for pH and instrumental color (Minolta CR-400). Evaluations were conducted for at least three different locations on each of the muscle samples and averaged before data analysis occurred. The longissimus thoracis had the lowest pH and the lightest and least red color compared with the other eight muscles evaluated in this study (mean differences ranged from 0.98 to 8.70 for L*, 3.98 to 12.56 for a*, and 0.026 to 0.409 for pH). Furthermore, regression analysis suggested that pH and color values for the longissimus thoracis were not adequate predictors for pH and color values obtained from other muscles and therefore consideration should be given to the individual muscles that are of interest.

Evaluation of Improvest effects on production parameters of gilts from two different genetic sire lines

The objective was to evaluate the effects of Improvest on the performance and carcass characteristics of gilts from two different genetic sire lines and the performance of Improvest gilts with castrated male pigs. It was hypothesized that performance parameters observed for Improvest gilts would be similar to barrows, thus narrowing the performance gaps between traditionally managed gilts and barrows. Pigs were from Large White/Landrace dams and either Duroc-Pietrain (DP) or Duroc (D) sires. Females within each genetic sire line were randomized by weight to receive the first dose of Improvest (IMP) on day 25 of the study or to serve as a nontreated control (DP IMP gilt (n = 6 pens; 19 pigs/pen), D IMP gilt (n = 6 pens; 19 pigs/pen), DP CON gilt (n = 6 pens; 19 pigs/pen), D CON gilt (n = 6 pens; 19 pigs/pen). The second dose of Improvest was administered 6 wk later (i.e., day 67). Barrows did not receive Improvest (DP barrow [n = 10 pens; 19 to 20 pigs/pen], D barrow [n = 10 pens; 19 to 20 pigs/pen]). Average daily gain (ADG), average daily feed intake (ADFI), and gain-to-feed ratio (G:F) were measured at 21 d intervals throughout the duration of the study. The targeted weight for pigs to be marketed was 133 ± 2.5 kg. Carcass characteristics and loin quality parameters were evaluated on a subset of pigs (n = 283). Improvest-treated gilts of both genetic lines had increased (P ≤ 0.05) ADG and ADFI compared to untreated gilts during the post-second dose intervals with values exceeding that of barrows from day 84 to marketing. Overall, DP IMP gilts had increased (P ≤ 0.05) G:F post-second dose compared to DP CON gilts and DP barrows, yet all other treatments were similar. As pigs were marketed at a similar weight, there was no difference in the final weight, however, DP IMP gilts and DP barrows reached market weight sooner (P ≤ 0.05) than DP CON gilts (109.9 and 111.8 vs. 114.3 ± 0.8 d). Backfat and loin weight were greater (P < 0.01) in IMP gilts versus CON gilts, while IMP gilts and barrows had similar values within each respective genetic sire line. There were no differences between treatments (P ≥ 0.08) for pH and instrumental color of the loins. When the pass rate of loins (Japanese color score ≥ 3.0 and marbling ≥ 2.0) was evaluated, IMP gilts were at intermediate values between CON gilts and barrows for each respective genetic sire line. Overall, Improvest within a genetic line improved gilt carcass measurements so that they were more similar to barrows.

A comparison of carcass characteristics, carcass cutting yields, and meat quality of barrows and gilts

Objectives of this research were to compare carcass characteristics, carcass cutting yields, and meat quality for market barrows and market gilts. Commercially-sourced carcasses from 168 market barrows and 175 market gilts weighing an average of 107.44 ± 7.37 kg were selected from 17 different slaughter groups representing approximately 3,950 carcasses. Each group was sorted into percentiles based on hot carcass weight with an equal number of barrows and gilts selected from each quartile so that weight minimally confounded parameters of interest. Carcass lean yield was determined for carcasses following fabrication (i.e. dissection of lean, fat, and bone tissue components) and meat quality measurements were evaluated at the time of fabrication (24 to 72 h postmortem) and following 14-d of postmortem storage. Data were analyzed as a randomized complete block design with carcass serving as the experimental unit, sex (barrow or gilt), the three hot carcass weight quantiles (light [<104 kg]; average [104 to 110 kg]; heavy [>110 kg]), and the interaction between sex and hot carcass weight quantile serving as fixed effects, and producer nested within slaughter event serving as a random effect. Results from the study demonstrated that gilt carcasses were leaner (3 mm less backfat thickness; 3.5 cm2 greater loin muscle area, 1.52% greater merchandized-cut yield, and 2.92% greater dissected carcass lean yield; P < 0.01) than barrow carcasses, while loins from barrows were higher quality (0.43% more intramuscular fat and slightly less shear force; P < 0.01) than loins from gilts. While this study confirms the well-known biological principle that barrow carcasses have greater levels of fat deposition and lower levels of carcass leanness when compared with gilt carcasses, this study provides a much-needed quantification of these differences for the commercial industry that will undoubtedly be useful as new technologies emerge in upcoming years.

Relationship between Inherent Cooking Rate and Warner-Bratzler Shear Force of Pork Chops Cooked to Two Degrees of Doneness

The objective was to test inherent cooking rate differences on tenderness values of boneless pork chops when exogenous factors known to influence cooking rate were controlled. Temperature and elapsed time were monitored during cooking for all chops. Cooking rate was calculated as the change in °C per minute of cooking time. Warner-Bratzler shear force (WBSF) was measured on chops cooked to either 63 °C or 71 °C. Slopes of regression lines and coefficients of determination between cooking rate and tenderness values for both degrees of doneness (DoD) were calculated. Shear force values decreased as cooking rate increased regardless of DoD (p ≤ 0.05), however changes in tenderness due to increased cooking rate were limited (β1 = −0.201 for 63 °C; β1 = −0.217 for 71 °C). Cooking rate only explained 3.2% and 5.4% of variability in WBSF of chops cooked to 63 °C and 71 °C, respectively. Cooking loss explained the most variability in WBSF regardless of DoD (partial R² = 0.09–0.12). When all factors were considered, a stepwise regression model explained 20% of WBSF variability of chops cooked to 63 °C and was moderately predictive of WBSF (model R² = 0.34) for chops cooked to 71 °C. Overall, cooking rate had minimal effect on pork chop tenderness.