Comparison of the wild-type alpha-amylase and its variant enzymes in Bacillus amyloliquefaciens in activity and thermal stability, and insights into engineering the thermal stability of bacillus alpha-amylase

Analysis of the action pattern of sequential α-amylases from B. stearothermophilus and B. amyloliquefaciens on highly concentrated soluble starch

Hydrolysis of highly concentrated soluble starch (60%, w/w) was performed using sequential α-amylases from Bacillus stearothermophilus (T, 0.2%, w/w) and Bacillus amyloliquefaciens (B, 0.1%, w/w) to identify their possible action patterns. We found that T reduced the average molecular weight (Mw) of soluble starch from 52,827 Da to 31,914 Da and significantly affected its branched chain length. Compared with soluble starch, the chains with DP 6-12 and DP ≥ 13 in the T samples were diminished by 46% and 96%, respectively. This resulted in an attenuation in the proportions of exterior and inner chains, as well as low iodine binding capacity of the hydrolysates. In contrast, a slower decrease in the average Mw of soluble starch occurred after TB incubation, and the level of DP 6-12 further lowered, causing a gradual decline in the iodine binding capacity of the hydrolysates. Gathered data revealed an unusual action pattern of sequential α-amylase treatment at high substrate concentrations. Bacillus stearothermophilus α-amylase exhibited more pronounced endo-hydrolysis of amylopectin, whereas the attack of Bacillus amyloliquefaciens α-amylase on the exterior chains was enhanced in amylopectin residues. These findings suggest that the synergy of various α-amylases is an effective strategy to promote the dextrinization of highly concentrated starch and finely modify the molecular structure of starch.

Improving thermostability of Bacillus amyloliquefaciens alpha-amylase by multipoint mutations

The medium-temperature alpha-amylase of Bacillus amyloliquefaciens is widely used in the food and washing process. Enhancing the thermostability of alpha-amylases and investigating the mechanism of stability are important for enzyme industry development. The optimal temperature and pH of the wild-type BAA and mutant MuBAA (D28E/V118A/S187D/K370 N) were all 60 °C and 6.0, respectively. The mutant MuBAA showed better thermostability at 50 °C and 60 °C, with a specific activity of 206.61 U/mg, which was 99.1% greater than that of the wild-type. By analyzing predicted structures, the improving thermostability of the mutant MuBAA was mainly related to enhanced stabilization of a loop region in domain B via more calcium-binding sites and intramolecular interactions around Asp187. Furthermore, additional intramolecular interactions around sites 28 and 370 in domain A were also beneficial for improving thermostability. Additionally, the decrease of steric hindrance at the active cavity increased the specific activity of the mutant MuBAA. Improving the thermostability of BAA has theoretical reference values for the modification of alpha-amylases.

Bacterial and Archaeal α-Amylases: Diversity and Amelioration of the Desirable Characteristics for Industrial Applications

Industrial enzyme market has been projected to reach US$ 6.2 billion by 2020. Major reasons for continuous rise in the global sales of microbial enzymes are because of increase in the demand for consumer goods and biofuels. Among major industrial enzymes that find applications in baking, alcohol, detergent, and textile industries are α-amylases. These are produced by a variety of microbes, which randomly cleave α-1,4-glycosidic linkages in starch leading to the formation of limit dextrins. α-Amylases from different microbial sources vary in their properties, thus, suit specific applications. This review focuses on the native and recombinant α-amylases from bacteria and archaea, their production and the advancements in the molecular biology, protein engineering and structural studies, which aid in ameliorating their properties to suit the targeted industrial applications.

Synthesis, thermal and spectroscopic behaviors of metal-drug complexes: La(III), Ce(III), Sm(III) and Y(III) amoxicillin trihydrate antibiotic drug complexes

The metal complexes of Amoxicillin trihydrate with La(III), Ce(III), Sm(III) and Y(III) are synthesized with 1:1 (metal:Amox) molar ratio. The suggested formula structures of the complexes are based on the results of the elemental analyses, molar conductivity, (infrared, UV-visible and fluorescence) spectra, effective magnetic moment in Bohr magnetons, as well as the thermal analysis (TG), and characterized by X-ray powder diffraction (XRD) and scanning electron microscopy (SEM). The results obtained suggested that Amoxicillin reacted with metal ions as tridentate ligands, coordinating the metal ion through its amino, imino, and β-lactamic carbonyl. The kinetic thermodynamic parameters such as: Ea, ΔH(*), ΔS(*) and ΔG(*) were estimated from the DTG curves.

Close relationship of a novel Flavobacteriaceae α-amylase with archaeal α-amylases and good potentials for industrial applications

BACKGROUND

Bioethanol production from various starchy materials has received much attention in recent years. α-Amylases are key enzymes in the bioconversion process of starchy biomass to biofuels, food or other products. The properties of thermostability, pH stability, and Ca-independency are important in the development of such fermentation process.

RESULTS

A novel Flavobacteriaceae Sinomicrobium α-amylase (FSA) was identified and characterized from genomic analysis of a novel Flavobacteriaceae species. It is closely related with archaeal α-amylases in the GH13_7 subfamily, but is evolutionary distant with other bacterial α-amylases. Based on the conserved sequence alignment and homology modeling, with minor variation, the Zn2+- and Ca2+-binding sites of FSA were predicated to be the same as those of the archaeal thermophilic α-amylases. The recombinant α-amylase was highly expressed and biochemically characterized. It showed optimum activity at pH 6.0, high enzyme stability at pH 6.0 to 11.0, but weak thermostability. A disulfide bond was introduced by site-directed mutagenesis in domain C and resulted in the apparent improvement of the enzyme activity at high temperature and broad pH range. Moreover, about 50% of the enzyme activity was detected under 100°C condition, whereas no activity was observed for the wild type enzyme. Its thermostability was also enhanced to some extent, with the half-life time increasing from 25 to 55 minutes at 50°C. In addition, after the introduction of the disulfide bond, the protein became a Ca-independent enzyme.

CONCLUSIONS

The improved stability of FSA suggested that the domain C contributes to the overall stability of the enzyme under extreme conditions. In addition, successfully directed modification and special evolutionary status of FSA imply its directional reconstruction potentials for bioethanol production, as well as for other industrial applications.

Effects of site-directed mutagenesis in the N-terminal domain of thermolysin on its stabilization

The thermolysin variant G8C/N60C/S65P in which the triple mutation in the N-terminal domain, Gly8→Cys/Asn60→Cys/Ser65→Pro, is undertaken increases stability [Yasukawa, K. and Inouye, K. (2007) Improving the activity and stability of thermolysin by site-directed mutagenesis. Biochim. Biophys. Acta 1774, 1281-1288] and its mechanism is examined in this study. The apparent denaturing temperatures based on ellipticity at 222 nm of the wild-type thermolysin (WT), G8C/N60C, S65P and G8C/N60C/S65P were 85, >95, 88 and >95°C, respectively. The first-order rate constants, k(obs), of the thermal inactivation of WT and variants at 10 mM CaCl₂ increased with increasing thermal treatment temperatures (70-95°C), and those at 80°C decreased with increasing CaCl₂ concentrations (1-100 mM). The k(obs) values were in the order of WT > S65P > G8C/N60C≒G8C/N60C/S65P at all temperatures and CaCl₂ concentrations. These results indicate that the mutational combination, Gly8→Cys/Asn60→Cys and Ser65→Pro, increases stability only as high as Gly8→Cys/Asn60→Cys does. Assuming that irreversible inactivation of thermolysin occurs only in the absence of calcium ions, the dissociation constants, K(d), to the calcium ions of WT, G8C/N60C, S65P and G8C/N60C/S65P were 47, 8.9, 17 and 7.2 mM, respectively, suggesting that Gly8→Cys/Asn60→Cys and Ser65→Pro stabilize thermolysin by improving its affinity to calcium ions, most probably the one at the Ca²⁺-binding site III in the N-terminal domain.

Role of the calcium-binding residues Asp231, Asp233, and Asp438 in alpha-amylase of Bacillus amyloliquefaciens as revealed by mutational analysis

Role of the calcium-binding residues Asp231, Asp233, and Asp438 of Bacillus amyloliquefaciens alpha-amylase (BAA) on the enzyme properties was investigated by site-directed mutagenesis. The calcium-binding residues Asp231, Asp233, and Asp438 were replaced with Asn, Asn, and Gly to produce the mutants D231N, D233N, and D438G, respectively. The mutant amylases were purified to homogeneity and the purified enzymes was estimated to be approximately 58 kDa. The specific activity for the mutant enzyme D233N was decreased by 84.8%, while D231N and D438G showed a decrease of 6.3% and 3.5% to that of the wild-type enzyme, respectively. No significant changes in the K (m) value, thermo-stability, optimum temperature, and optimum pH were observed in the mutations of D231N and D438G, while substitution of Asp233 with Asn resulted in a dramatic reduction in the value of catalytic efficiency (K (cat)/K (m)) and thermo-stability at 60 degrees C. The ranges of optimum temperature and optimum pH for D233N were also reduced to about 10 degrees C and 3-4 units, respectively.

alpha-Amylase: an ideal representative of thermostable enzymes

The conditions prevailing in the industrial applications in which enzymes are used are rather extreme, especially with respect to temperature and pH. Therefore, there is a continuing demand to improve the stability of enzymes and to meet the requirements set by specific applications. In this respect, thermostable enzymes have been proposed to be industrially relevant. In this review, alpha-amylase, a well-established representative of thermostable enzymes, providing an attractive model for the investigation of the structural basis of thermostability of proteins, has been discussed.

Comparison of the thermal stabilities of reverse transcriptases from avian myeloblastosis virus and Moloney murine leukaemia virus

Reverse transcriptases (RTs) from avian myeloblastosis virus (AMV) and Moloney murine leukaemia virus (MMLV) have been most extensively used as a tool for conversion of RNA to DNA. In this study, we compared the thermal stabilities of AMV RT and MMLV RT by observing their irreversible thermal inactivation. The temperatures reducing initial activity by 50% in 10-min incubation, T(50), of AMV RT were 47 degrees C without the template-primer (T/P), poly(rA)-p(dT)(12-18), and 52 degrees C with the T/P (28 microM). T(50) of MMLV RT were 44 degrees C without the T/P and 47 degrees C with the T/P (28 microM). Unexpectedly, AMV RT was considerably activated when incubated with the T/P at 45 and 48 degrees C. Such activation was not observed in MMLV RT. These results suggest that AMV RT and MMLV RT are different in the following: (i) The intrinsic thermal stability of AMV RT is higher than that of MMLV RT; (ii) AMV RT is activated by thermal treatment with the T/P at 45-48 degrees C; and (iii) AMV RT is stabilized by the T/P more potently than MMLV RT. Thermodynamic analysis indicates that thermal inactivation of AMV RT and MMLV RT is due to the large entropy change of activation for thermal inactivation.

Improving the activity and stability of thermolysin by site-directed mutagenesis

In previous site-directed mutagenesis study on thermolysin, mutations which increase the catalytic activity or the thermal stability have been identified. In this study, we attempted to generate highly active and stable thermolysin by combining the mutations so far revealed to be effective. Three mutant enzymes, L144S (Leu144 in the central alpha-helix located at the bottom of the active site cleft is replaced with Ser), G8C/N60C/S65P (Gly8, Asn60, and Ser65 in the N-terminal region are replaced with Cys, Cys, and Pro, respectively, to introduce a disulfide bridge between the positions 8 and 60), and G8C/N60C/S65P/L144S, were constructed by site-directed mutagenesis. In the hydrolysis of N-[3-(2-furyl)acryloyl]-glycyl-L-leucine amide (FAGLA) and N-carbobenzoxy-L-aspartyl-L-phenylalanine methyl ester (ZDFM), the k(cat)/K(m) values of L144S and G8C/N60C/S65P/L144S were 5- to 10-fold higher than that of the wild-type enzyme. The rate constants for thermal inactivation at 70 degrees C and 80 degrees C of G8C/N60C/S65P and G8C/N60C/S65P/L144S decreased to 50% of that of the wild-type enzyme. These results indicate that G8C/N60C/S65P/L144S is more active and stable than the wild-type thermolysin. Thermodynamic analysis suggests that the single mutation of Leu144-->Ser and the triple mutation of Gly8-->Cys, Asn60-->Cys, and Ser65-->Pro are independent.

Comparison of Starch Hydrolysis Activity and Thermal Stability of Two Bacillus licheniformis α-Amylases and Insights into Engineering α-Amylase Variants Active under Acidic Conditions

Bacillus licheniformis alpha-amylase (BLA) is widely used in various procedures of starch degradation in the food industry, and a BLA species with improved activity at higher temperature and under acidic conditions is desirable. Two BLA species, designated as PA and MA, have been isolated from the wild-type B. licheniformis strain and a mutant strain, respectively. In this study, their starch-hydrolysis activity and thermal stability were examined. MA showed higher activity than PA, especially at acidic pH (pH 5.0-5.5), and even after 1 h of treatment at 90 degrees C. MA was active in the range of pH 4.0-8.0, which is much wider than that (pH 4.5-7.5) of PA. It was shown that the proton dissociation constants on the acidic and alkaline sides (pKa1 and pKa2) were shifted to more acidic and basic values, respectively, by the mutation of PA to MA. The activation energy and thermodynamic parameters for their thermal inactivation indicate that MA is more thermally stable and catalytically active than PA, suggesting that MA could be useful for glucose-production process coupled with reactions catalyzed by beta-amylase.