Enhanced activity and stability in the presence of organic solvents by increased active site polarity and stabilization of a surface loop in a metalloprotease

Stability Enhancement of Aldehyde Dehydrogenase from Anoxybacillus geothermalis Strain D9 Immobilized onto Seplite LX120

Enzyme stability is regarded as an important criterion for an industrial biocatalyst. Aldehyde dehydrogenase (ALDH) from A. geothermalis strain D9 was previously reported to exhibit good thermostability. However, this enzyme is still not suited to use in harsh environments. In this current work, we aim to see the viability of ALDH in terms of stability when immobilized into Seplite LX120. The purified ALDH was successfully immobilized via physical adsorption at 4 h with 1.25 mg/mL enzyme loading. The immobilized ALDH exhibited improved stability compared to free ALDH as the optimum temperature increased up to 80 °C and was stable with temperatures ranging from 30 to 90 °C. It was also stable in broad pH, ranging from pH 4 to pH 12. Moreover, more than 50% of the immobilized ALDH activity was retained after being stored at 25 °C and 4 °C for 9 and 11 weeks, respectively. The reusability of immobilized ALDH is up to seven cycles. The corroboration of ALDH immobilized on the Seplite LX120 was verified via Fourier-transform infrared spectroscopy, scanning electron microscopy, and a reduction in the surface area. The improved features of immobilized ALDH, especially in enzyme stability, are important for future applications.

An insight into the potentials of carbon dots for in vitro live-cell imaging: recent progress, challenges, and prospects

Carbon dots (CDs) are a strong alternative to conventional fluorescent probes for cell imaging due to their brightness, photostability, tunable fluorescence emission, low toxicity, inexpensive preparation, and chemical diversity. Improving the targeting efficiency by modulation of the surface functional groups and understanding the mechanisms of targeted imaging are the most challenging issues in cell imaging by CDs. Firstly, we briefly discuss important features of fluorescent CDs for live-cell imaging application in this review. Then, the newest modulated CDs for targeted live-cell imaging of whole-cell, cell organelles, pH, ions, small molecules, and proteins are elaborately discussed, and their challenges in these fields are explained.

Using Molecular Simulation to Guide Protein Engineering for Biocatalysis in Organic Solvents

Biocatalysis in organic solvents (OSs) is very appealing for the industry in producing bulk and/or fine chemicals, such as pharmaceuticals, biodiesel, and fragrances. The poor performance of enzymes in OSs (e.g., reduced activity, insufficient stability, and deactivation) negates OSs' excellent solvent properties. Molecular dynamics (MD) simulations provide a complementary method to study the relationship between enzymes dynamics and the stability in OSs. Here we describe computational procedure for MD simulation of enzymes in OSs with an example of Bacillus subtilis lipase A (BSLA) in dimethyl sulfoxide (DMSO) cosolvent with software GROMACS. We discuss main essential practical issues considered (such as choice of force field, parameterization, simulation setup, and trajectory analysis). The core part of this protocol (enzyme-OS system setup, analysis of structural-based and solvation-based observables) is transferable to other enzymes and any OS systems. Combining with experimental studies, the obtained molecular knowledge is most likely to guide researchers to access rational protein engineering approaches to tailor OS resistant enzymes and expand the scope of biocatalysis in OS media. Finally, we discuss potential solutions to overcome the remaining challenges of computational biocatalysis in OSs and briefly draw future directions for further improvement in this field.

Biophysical characterization of the inactivation of E. coli transketolase by aqueous co-solvents

Transketolase (TK) has been previously engineered, using semi-rational directed evolution and substrate walking, to accept increasingly aliphatic, cyclic, and then aromatic substrates. This has ultimately led to the poor water solubility of new substrates, as a potential bottleneck to further exploitation of this enzyme in biocatalysis. Here we used a range of biophysical studies to characterise the response of both E. coli apo- and holo-TK activity and structure to a range of polar organic co-solvents: acetonitrile (AcCN), n-butanol (nBuOH), ethyl acetate (EtOAc), isopropanol (iPrOH), and tetrahydrofuran (THF). The mechanism of enzyme deactivation was found to be predominantly via solvent-induced local unfolding. Holo-TK is thermodynamically more stable than apo-TK and yet for four of the five co-solvents it retained less activity than apo-TK after exposure to organic solvents, indicating that solvent tolerance was not simply correlated to global conformational stability. The co-solvent concentrations required for complete enzyme inactivation was inversely proportional to co-solvent log(P), while the unfolding rate was directly proportional, indicating that the solvents interact with and partially unfold the enzyme through hydrophobic contacts. Small amounts of aggregate formed in some cases, but this was not sufficient to explain the enzyme inactivation. TK was found to be tolerant to 15% (v/v) iPrOH, 10% (v/v) AcCN, or 6% (v/v) nBuOH over 3 h. This work indicates that future attempts to engineer the enzyme to better tolerate co-solvents should focus on increasing the stability of the protein to local unfolding, particularly in and around the cofactor-binding loops.

CompassR Yields Highly Organic-Solvent-Tolerant Enzymes through Recombination of Compatible Substitutions

The CompassR (computer-assisted recombination) rule enables, among beneficial substitutions, the identification of those that can be recombined in directed evolution. Herein, a recombination strategy is systematically investigated to minimize experimental efforts and maximize possible improvements. In total, 15 beneficial substitutions from Bacillus subtilis lipase A (BSLA), which improves resistance to the organic cosolvent 1,4-dioxane (DOX), were studied to compare two recombination strategies, the two-gene recombination process (2GenReP) and the in silico guided recombination process (InSiReP), employing CompassR. Remarkably, both strategies yielded a highly DOX-resistant variant, M4 (I12R/Y49R/E65H/N98R/K122E/L124K), with up to 14.6-fold improvement after screening of about 270 clones. M4 has a remarkably enhanced resistance in 60 % (v/v) acetone (6.0-fold), 30 % (v/v) ethanol (2.1-fold), and 60 % (v/v) methanol (2.4-fold) compared with wild-type BSLA. Molecular dynamics simulations revealed that attracting water molecules by charged surface substitutions is the main driver for increasing the DOX resistance of BSLA M4. Both strategies and obtained molecular knowledge can likely be used to improve the properties of other enzymes with a similar α/β-hydrolase fold.

Immobilization of endoglucanase Cel9A on chitosan nanoparticles leads to its stabilization against organic solvents: the use of polyols to improve the stability

The immobilization of enzymes improves their stability in non-conventional media such as organic solvents. In this work, the effects of solvents (DMSO, methanol, ethanol, and n-propanol) on the endoglucanase Cel9A activity and stability were studied. Then, the enzymes were stabilized by its immobilization on chitosan nanoparticles and also using polyols (sorbitol and glycerol) against organic solvents. The SEM results illustrated that the chitosan nanoparticles had about 40 nm diameter. The results indicated that the organic solvents, especially n-propanol, decreased the activity of the free and immobilized enzymes. The reduced activity of the immobilized enzyme was less than that of the free enzyme. Our studies about the enzymes' stability showed that the free and immobilized enzymes in hydrophobic solvents (with high log P) had the lowest stability compared to other solvents as we observed the half-life of the free enzyme in n-propanol solvent was 2.84 min, and the half-life of the immobilized enzyme was 4.98 min in n-propanol and ethanol solvents 4.50 min. Analysis of the combinatory effects of polyols (sorbitol and glycerol) and the solvents on the stability revealed that sorbitol and glycerol had the most stabilizing effect on the free enzyme in hydrophilic (DMSO) and hydrophobic (n-propanol) solvents, respectively. However, the stabilizing effects of polyols in the immobilized enzyme were independent of the solvents' hydrophobicity (or log P) due to the hydrophilic properties of chitosan nanoparticles. Therefore, one can conclude that the physiochemical properties of nanoparticles (such as hydrophilicity) influence the stabilizing effects of polyols on immobilized enzyme.

Theoretical and experimental studies on the conformational changes of organic solvent-stable protease from Bacillus sphaericus DS11 in methanol/water mixtures

If natural proteases are used in organic synthesis, they are often inactivated or give a low rate of reaction in non-aqueous or aqueous-organic media. Therefore, to reveal the molecular mechanism governing the stability of proteases in organic solvents and increase protease stability in those systems is of intriguing interest. In the present study, the activity and conformational changes of an organic solvent-stable protease (OSP) from Bacillus sphaericus DS11 in different concentrations of methanol were investigated by measuring fluorescence, UV-Vis spectra, circular dichroism (CD), and conducting molecular dynamics (MD) simulations. The OSP expanded with increasing methanol concentration. The methanol molecules were able to enter into the OSP, leading to microenvironmental changes around the aromatic amino acids. More hydrophobic groups were exposed to the solvents at high methanol concentrations, and the original hydrophobic interaction in the protein decreased, thus resulting in the secondary and tertiary structure change in the OSP. Our results provide helpful insight into the molecular mechanism of the OSP tolerance to organic solvent and indicate directions for future work to design and engineer proteases that are stable at high organic solvent concentrations.

Purification and characterization of a thermo- and organic solvent-tolerant alkaline protease from Bacillus sp. JER02

Bacillus sp. JER02 is a bacterial strain that can be grown in a medium containing organic solvents and produce a protease enzyme. JER02 protease was purified with a yield of 31.9% of total protein and 328.83-fold purification. Km and Vmax of this protease were established as 0.826 µM and 7.18 µmol/min, respectively. JER02 protease stability was stimulated about 80% by cyclohexane. It exhibited optimum temperature activity at 70°C. Furthermore, this enzyme was active in a wide range of pH (4-12) and showed maximum activity at pH 9.0. The nonionic detergents Tween-20 and Triton X-100 improved the protease activity by 30 and 20%, respectively. In addition, this enzyme was shown to be very stable in the presence of strong anionic surfactants and oxidizing agents, since it retained 77%, 93%, and 98% of its initial activity, after 1 hr of incubation at room temperature with sodium dodecyl sulfate (SDS), sodium perborate (1%, v/v) and H2O2 (1%, v/v), respectively. Overall, the unique properties of the Bacillus sp. JER02 protease suggested that this thermo- and detergent-stable, solvent-tolerant protease has great potential for industrial applications.

Protein engineering by random mutagenesis and structure-guided consensus of Geobacillus stearothermophilus Lipase T6 for enhanced stability in methanol

The abilities of enzymes to catalyze reactions in nonnatural environments of organic solvents have opened new opportunities for enzyme-based industrial processes. However, the main drawback of such processes is that most enzymes have a limited stability in polar organic solvents. In this study, we employed protein engineering methods to generate a lipase for enhanced stability in methanol, which is important for biodiesel production. Two protein engineering approaches, random mutagenesis (error-prone PCR) and structure-guided consensus, were applied in parallel on an unexplored lipase gene from Geobacillus stearothermophilus T6. A high-throughput colorimetric screening assay was used to evaluate lipase activity after an incubation period in high methanol concentrations. Both protein engineering approaches were successful in producing variants with elevated half-life values in 70% methanol. The best variant of the random mutagenesis library, Q185L, exhibited 23-fold-improved stability, yet its methanolysis activity was decreased by one-half compared to the wild type. The best variant from the consensus library, H86Y/A269T, exhibited 66-fold-improved stability in methanol along with elevated thermostability (+4.3°C) and a 2-fold-higher fatty acid methyl ester yield from soybean oil. Based on in silico modeling, we suggest that the Q185L substitution facilitates a closed lid conformation that limits access for both the methanol and substrate excess into the active site. The enhanced stability of H86Y/A269T was a result of formation of new hydrogen bonds. These improved characteristics make this variant a potential biocatalyst for biodiesel production.

Dieselzymes: development of a stable and methanol tolerant lipase for biodiesel production by directed evolution

BACKGROUND

Biodiesels are methyl esters of fatty acids that are usually produced by base catalyzed transesterification of triacylglyerol with methanol. Some lipase enzymes are effective catalysts for biodiesel synthesis and have many potential advantages over traditional base or acid catalyzed transesterification. Natural lipases are often rapidly inactivated by the high methanol concentrations used for biodiesel synthesis, however, limiting their practical use. The lipase from Proteus mirabilis is a particularly promising catalyst for biodiesel synthesis as it produces high yields of methyl esters even in the presence of large amounts of water and expresses very well in Escherichia coli. However, since the Proteus mirabilis lipase is only moderately stable and methanol tolerant, these properties need to be improved before the enzyme can be used industrially.

RESULTS

We employed directed evolution, resulting in a Proteus mirabilis lipase variant with 13 mutations, which we call Dieselzyme 4. Dieselzyme 4 has greatly improved thermal stability, with a 30-fold increase in the half-inactivation time at 50°C relative to the wild-type enzyme. The evolved enzyme also has dramatically increased methanol tolerance, showing a 50-fold longer half-inactivation time in 50% aqueous methanol. The immobilized Dieselzyme 4 enzyme retains the ability to synthesize biodiesel and has improved longevity over wild-type or the industrially used Brukholderia cepacia lipase during many cycles of biodiesel synthesis. A crystal structure of Dieselzyme 4 reveals additional hydrogen bonds and salt bridges in Dieselzyme 4 compared to the wild-type enzyme, suggesting that polar interactions may become particularly stabilizing in the reduced dielectric environment of the oil and methanol mixture used for biodiesel synthesis.

CONCLUSIONS

Directed evolution was used to produce a stable lipase, Dieselzyme 4, which could be immobilized and re-used for biodiesel synthesis. Dieselzyme 4 outperforms the industrially used lipase from Burkholderia cepacia and provides a platform for still further evolution of desirable biodiesel production properties.

Optimization of an extracellular zinc-metalloprotease (SVP2) expression in Escherichia coli BL21 (DE3) using response surface methodology

In this work, SVP2 from Salinivibrio proteolyticus strain AF-2004, a zinc metalloprotease with suitable biotechnological applications, was cloned for expression at high levels in Escherichia coli with the intention of changing culture conditions to generate a stable extracellular enzyme extract. The complete ORF of SVP2 gene was heterologously expressed in E. coli BL21 (DE3) by using pQE-80L expression vector system. In initial step, the effect of seven factors include: incubation temperature, peptone and yeast extract concentration, cell density (OD600) before induction, inducer (IPTG) concentration, induction time, and Ca(2+) ion concentrations on extracellular recombinant SVP2 expression and stability were investigated. The primary results revealed that the IPTG concentration, Ca(2+) ion concentration and induction time are the most important effectors on protease secretion by recombinant E. coli BL21. Central composite design experiment in the following showed that the maximum protease activity (522 U/ml) was achieved in 0.0089 mM IPTG for 24h at 30 °C, an OD600 of 2, 0.5% of peptone and yeast extract, and a Ca(2+) ion concentration of 1.3 mM. The results exhibited that the minimum level of IPTG concentration along with high cell density and medium level of Ca(2+) with prolonged induction time provided the best culture condition for maximum extracellular production of heterologous protease SVP2 in E. coli expression system.

Temperature, organic solvent and pH stabilization of the neutral protease from Salinovibrio proteolyticus: significance of the structural calcium

In order to clarify the impact of Ca-binding sites (Ca1 and 2) on the conformational stability of neutral proteases (NPs), we have analyzed the thermal, pH and organic solvent stability of a NP variant, V189P/A195E/G203D/A268E (Q-mutant), from Salinovibrio proteolyticus. This mutant has shown to bind calcium more tightly than the wild-type (WT) at Ca1 and to possess Ca2. Q-mutant was resisted against autolysis, thermoinactivation and pH denaturation in a Ca-dependent manner and exhibited better activity in organic solvents compared to the WT enzyme. These results imply that Ca1 and Ca2 are important for the conformational stability of NPs.