Antibiotic-Containing Agarose Hydrogel for Wound and Burn Care

A novel, reverse-phase-shifting, thermoreversible foaming hydrogel containing antibiotics for the treatment of thermal burns in a swine model - A pilot study

BACKGROUND

This study compared a novel topical hydrogel burn dressing (CI-PRJ012) to standard of care (silver sulfadiazine) and to untreated control in a swine thermal burn model, to assess for wound healing properties both in the presence and absence of concomitant bacterial inoculation.

METHODS

Eight equal burn wounds were created on six Yorkshire swine. Half the wounds were randomized to post-burn bacterial inoculation. Wounds were subsequently randomized to three treatments groups: no intervention, CI-PRJ012, or silver sulfadiazine cream. At study end, a blinded pathologist evaluated wounds for necrosis and bacterial colonization.

RESULTS

When comparing CI-PRJ012 and silver sulfadiazine cream to no treatment, both agents significantly reduced the amount of necrosis and bacteria at 7 days after wound creation (p < 0.01, independently for both). Further, CI-PRJ012 was found to be significantly better than silver sulfadiazine (p < 0.02) in reducing bacterial colonization. For wound necrosis, no significant difference was found between silver sulfadiazine cream and CI-PRJ012 (p = 0.33).

CONCLUSIONS

CI-PRJ012 decreases necrosis and bacterial colonization compared to no treatment in a swine model. CI-PRJ012 appeared to perform comparably to silver sulfadiazine. CI-PRJ012, which is easily removed with the application of room-temperature water, may provide clinical advantages over silver sulfadiazine.

3D Printing of Polysaccharide-Based Hydrogel Scaffolds for Tissue Engineering Applications: A Review

In tissue engineering, 3D printing represents a versatile technology employing inks to construct three-dimensional living structures, mimicking natural biological systems. This technology efficiently translates digital blueprints into highly reproducible 3D objects. Recent advances have expanded 3D printing applications, allowing for the fabrication of diverse anatomical components, including engineered functional tissues and organs. The development of printable inks, which incorporate macromolecules, enzymes, cells, and growth factors, is advancing with the aim of restoring damaged tissues and organs. Polysaccharides, recognized for their intrinsic resemblance to components of the extracellular matrix have garnered significant attention in the field of tissue engineering. This review explores diverse 3D printing techniques, outlining distinctive features that should characterize scaffolds used as ideal matrices in tissue engineering. A detailed investigation into the properties and roles of polysaccharides in tissue engineering is highlighted. The review also culminates in a profound exploration of 3D polysaccharide-based hydrogel applications, focusing on recent breakthroughs in regenerating different tissues such as skin, bone, cartilage, heart, nerve, vasculature, and skeletal muscle. It further addresses challenges and prospective directions in 3D printing hydrogels based on polysaccharides, paving the way for innovative research to fabricate functional tissues, enhancing patient care, and improving quality of life.

Antioxidant and antibacterial hydrogel formed by protocatechualdehyde-ferric iron complex and aminopolysaccharide for infected wound healing

To better treat bacteria-infected wounds and promote healing, new wound dressings must be developed. In this study, we obtained PA@Fe by chelating iron trivalent ions (Fe3+) with protocatechualdehyde (PA), which has a catechol structure. Subsequently, we reacted it with ethylene glycol chitosan (GC) via a Schiff base reaction and loaded vancomycin to obtain an antibacterial Gel@Van hydrogel with a photothermal response. The as-prepared Gel@Van hydrogel exhibited good injectability, self-healing, hemostasis, photothermal stability, biocompatibility, and antioxidant and antibacterial properties. Moreover, Gel@Van hydrogel achieved highly synergistic antibacterial efficacy through photothermal and antibiotic sterilization. In a mouse skin-damaged infection model, Gel@Van hydrogel had a strong ability to promote the healing of methicillin-resistant Staphylococcus aureus (MRSA)-infected wounds, indicating the great potential application value of Gel@Van hydrogel in the field of treating and promoting the healing of infected wounds.

Filament coating system assists recovery of ablative fCO2 laser treatment: A split-face clinical observation

BACKGROUND

The current nursing procedure after fractional carbon dioxide (fCO2) is complex and needs to be optimized. The present study was conducted to evaluate the assisting effect of filament coating system after fCO2 laser treatment.

METHODS

Chinese individuals aged from 18 to 65 years diagnosed as photoaging or atrophic acne scar were recruited and each participant was treated with one single pass of fCO2 laser. A split face was randomly assigned as treatment side or control side. For control side, conventional procedure was topically applied respectively, including desonide cream two times for 3 days, fusidic acid cream two times for 7 days, and recombinant human epidermal growth factor (RhEGF) gel four times for 7 days; for treating side, a filament coating system was applied immediately after one application of fusidic acid cream, desonide cream and RhEGF, and removed 3 h later, for 3 days. Erythema, edema, crust, and pain on both sides were scored from 0 to 10 before and 1, 2, 4, and 7 days after fCO2 laser treatment. Stratum corneum hydration (SCH) and sebum of forehead and cheek on both sides were also measured by using Corneometer-Sebumeter.

RESULTS

Twenty photoaging and 11 atrophic acne scar participants finished the observation. All of them complained of erythema, edema, crust, and pain after fCO2 laser treatment, and the scores decreased as time passed by. There were no statistical significances of erythema, edema, crust, pain, SCH, and sebum between treating side and control side at each observation time.

CONCLUSION

Filament coating system was effective, safe, convenient, and economic in assisting recovery of ablative fCO2 laser, which might be a new option for additional nursing procedure.

Exploring the Model of Cefazolin Released from Jellyfish Gelatin-Based Hydrogels as Affected by Glutaraldehyde

Due to its excellent biocompatibility and ease of biodegradation, jellyfish gelatin has gained attention as a hydrogel. However, hydrogel produced from jellyfish gelatin has not yet been sufficiently characterized. Therefore, this research aims to produce a jellyfish gelatin-based hydrogel. The gelatin produced from desalted jellyfish by-products varied with the part of the specimen and extraction time. Hydrogels with gelatin: glutaraldehyde ratios of 10:0.25, 10:0.50, and 10:1.00 (v/v) were characterized, and their cefazolin release ability was determined. The optimal conditions for gelatin extraction and chosen for the development of jellyfish hydrogels (JGel) included the use of the umbrella part of desalted jellyfish by-products extracted for 24 h (WU24), which yielded the highest gel strength (460.02 g), viscosity (24.45 cP), gelling temperature (12.70 °C), and melting temperature (22.48 °C). The quantities of collagen alpha-1(XXVIII) chain A, collagen alpha-1(XXI) chain, and collagen alpha-2(IX) chain in WU24 may influence its gel properties. Increasing the glutaraldehyde content in JGel increased the gel fraction by decreasing the space between the protein chains and gel swelling, as glutaraldehyde binds with lateral amino acid residues and produces a stronger network. At 8 h, more than 80% of the cefazolin in JGel (10:0.25) was released, which was higher than that released from bovine hydrogel (52.81%) and fish hydrogel (54.04%). This research is the first report focused on the production of JGel using glutaraldehyde as a cross-linking agent.

Rapid eradication of vancomycin and methicillin-resistant Staphylococcus aureus by MDP1 antimicrobial peptide coated on photocrosslinkable chitosan hydrogel: in vitro antibacterial and in silico molecular docking studies

Introduction

Antibiotic resistance and weak bioavailability of antibiotics in the skin due to systemic administration leads to failure in eradication of vancomycin- and methicillin-resistant Staphylococcus aureus (VRSA and MRSA)-associated wound infections and subsequent septicemia and even death. Accordingly, this study aimed at designing a photocrosslinkable methacrylated chitosan (MECs) hydrogel coated by melittin-derived peptide 1 (MDP1) that integrated the antibacterial activity with the promising skin regenerative capacity of the hydrogel to eradicate bacteria by burst release strategy.

Methods

The MECs was coated with MDP1 (MECs-MDP1), characterized, and the hydrogel-peptide interaction was evaluated by molecular docking. Antibacterial activities of MECs-MDP1 were evaluated against VRSA and MRSA bacteria and compared to MECs-vancomycin (MECs-vanco). Antibiofilm activity of MECs-MDP1 was studied by our novel 'in situ biofilm inhibition zone (IBIZ)' assay, and SEM. Biocompatibility with human dermal fibroblast cells (HDFs) was also evaluated.

Results and Discussion

Molecular docking showed hydrogen bonds as the most interactions between MDP1 and MECs at a reasonable affinity. MECs-MDP1 eradicated the bacteria rapidly by burst release strategy whereas MECs-vanco failed to eradicate them at the same time intervals. Antibiofilm activity of MECs-MDP1 were also proved successfully. As a novel report, molecular docking analysis has demonstrated that MDP1 covers the structure of MECs and also binds to lysozyme with a reasonable affinity, which may explain the inhibition of lysozyme. MECs-MDP1 was also biocompatible with human dermal fibroblast skin cells, which indicates its safe future application. The antibacterial properties of a photocrosslinkable methacrylated chitosan-based hydrogel coated with MDP1 antimicrobial peptide were successfully proved against the most challenging antibiotic-resistant bacteria causing nosocomial wound infections; VRSA and MRSA. Molecular docking analysis revealed that MDP1 interacts with MECs mainly through hydrogen bonds with reasonable binding affinity. MECs-MDP1 hydrogels eradicated the planktonic state of bacteria by burst release of MDP1 in just a few hours whereas MECs-vanco failed to eradicate them. inhibition zone assay showed the anti-biofilm activity of the MECs-MDP1 hydrogel too. These findings emphasize that MECs-MDP1 hydrogel would be suggested as a biocompatible wound-dressing candidate with considerable and rapid antibacterial activities to prevent/eradicate VRSA/MRSA bacterial wound infections.

Synthesis and Characterization of Agarose Hydrogels for Release of Diclofenac Sodium

Hydrogels are attractive biomaterials for the controlled release of various pharmaceuticals, due to their ability to embed biologically active moieties in a 3D polymer network. Among them, agarose-based hydrogels are an interesting, but still not fully explored, group of potential platforms for controlled drug release. In this work, agarose hydrogels with various contents of citric acid were prepared, and their mechanical and physicochemical properties were investigated using various instrumental techniques, such as rheological measurements, attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR). Releasing tests for diclofenac sodium (DICL) were run in various environments; water, PBS, and 0.01 M NaOH; which remarkably affected the profile of the controlled release of this model drug. In addition to affecting the mechanical properties, the amount of citric acid incorporated within a hydrogel network during synthesis was also of great importance to the rate of DICL release. Therefore, due to their high biocompatibility, agarose hydrogels can be regarded as safe and potential platforms for controlled drug release in biomedical applications.

Breakthrough treatments for accelerated wound healing

Skin injuries across the body continue to disrupt everyday life for millions of patients and result in prolonged hospital stays, infection, and death. Advances in wound healing devices have improved clinical practice but have mainly focused on treating macroscale healing versus underlying microscale pathophysiology. Consensus is lacking on optimal treatment strategies using a spectrum of wound healing products, which has motivated the design of new therapies. We summarize advances in the development of novel drug, biologic products, and biomaterial therapies for wound healing for marketed therapies and those in clinical trials. We also share perspectives for successful and accelerated translation of novel integrated therapies for wound healing.

Application of Biomedical Microspheres in Wound Healing

Tissue injury, one of the most common traumatic injuries in daily life, easily leads to secondary wound infections. To promote wound healing and reduce scarring, various kinds of wound dressings, such as gauze, bandages, sponges, patches, and microspheres, have been developed for wound healing. Among them, microsphere-based tissue dressings have attracted increasing attention due to the advantage of easy to fabricate, excellent physicochemical performance and superior drug release ability. In this review, we first introduced the common methods for microspheres preparation, such as emulsification-solvent method, electrospray method, microfluidic technology as well as phase separation methods. Next, we summarized the common biomaterials for the fabrication of the microspheres including natural polymers and synthetic polymers. Then, we presented the application of the various microspheres from different processing methods in wound healing and other applications. Finally, we analyzed the limitations and discussed the future development direction of microspheres in the future.

Topical Drug Delivery in the Treatment of Skin Wounds and Ocular Trauma Using the Platform Wound Device

Topical treatment of injuries such as skin wounds and ocular trauma is the favored route of administration. Local drug delivery systems can be applied directly to the injured area, and their properties for releasing therapeutics can be tailored. Topical treatment also reduces the risk of adverse systemic effects while providing very high therapeutic concentrations at the target site. This review article highlights the Platform Wound Device (PWD) (Applied Tissue Technologies LLC, Hingham, MA, USA) for topical drug delivery in the treatment of skin wounds and eye injuries. The PWD is a unique, single-component, impermeable, polyurethane dressing that can be applied immediately after injury to provide a protective dressing and a tool for precise topical delivery of drugs such as analgesics and antibiotics. The use of the PWD as a topical drug delivery platform has been extensively validated in the treatment of skin and eye injuries. The purpose of this article is to summarize the findings from these preclinical and clinical studies.

Antibacterial smart hydrogels: New hope for infectious wound management

Millions of people die annually due to uncured wound infections. Healthcare systems incur high costs to treat wound infections. Tt is predicted to become more challenging due to the rise of multidrug-resistant conditions. During the last decades, smart antibacterial hydrogels could attract attention as a promising solution, especially for skin wound infections. These antibacterial hydrogels are termed 'smart' due to their response to specific physical and chemical environmental stimuli. To deliver different drugs to particular sites in a controlled manner, various types of crosslinking strategies are used in the manufacturing process. Smart hydrogels are designed to provide antimicrobial agents to the infected sites or are built from polymers with inherent disinfectant properties. This paper aims to critically review recent pre-clinical and clinical advances in using smart hydrogels against skin wound infections and propose the next best thing for future trends. For this purpose, an introduction to skin wound healing and disease is presented and intelligent hydrogels responding to different stimuli are introduced. Finally, the most promising investigations are discussed in their related sections. These studies can pave the way for producing new biomaterials with clinical applications.

Delivery of topical gentamicin cream via platform wound device to reduce wound infection—A prospective, controlled, randomised, clinical study

The platform wound device (PWD) is a wound coverage system that is designed to decrease wound infection rates by allowing for direct delivery of topical antibiotics and antimicrobials while creating a sealed, protective barrier around the area of injury. This study evaluated the safety and efficacy of the PWD as a protective dressing and a delivery system for topical antibiotics compared to the current standard of care (SoC). This was a multi-center, prospective, randomised, controlled clinical trial. The wounds were treated with the PWD with gentamicin cream or SoC dressings. The wounds were evaluated before the start of treatment and after 48-96 hours via clinical assessment, photographs, and qualitative bacterial swabs for bacterial analysis. The delivery of gentamicin via the PWD was safe and did not cause any adverse effects. The treatment decreased both inflammation and bacterial growth during the study period. No significant differences in the SoC were observed. The PWD is a transparent and impermeable polyurethane chamber that encloses and protects the injured area. The delivery of topical gentamicin via the PWD was safe and effective. Clinical assessment for infection found the PWD to be non-inferior to the current SoC treatment options.

Three-Dimensional Bioprinting for Cartilage Tissue Engineering: Insights into Naturally-Derived Bioinks from Land and Marine Sources

In regenerative medicine and tissue engineering, the possibility to: (I) customize the shape and size of scaffolds, (II) develop highly mimicked tissues with a precise digital control, (III) manufacture complex structures and (IV) reduce the wastes related to the production process, are the main advantages of additive manufacturing technologies such as three-dimensional (3D) bioprinting. Specifically, this technique, which uses suitable hydrogel-based bioinks, enriched with cells and/or growth factors, has received significant consideration, especially in cartilage tissue engineering (CTE). In this field of interest, it may allow mimicking the complex native zonal hyaline cartilage organization by further enhancing its biological cues. However, there are still some limitations that need to be overcome before 3D bioprinting may be globally used for scaffolds’ development and their clinical translation. One of them is represented by the poor availability of appropriate, biocompatible and eco-friendly biomaterials, which should present a series of specific requirements to be used and transformed into a proper bioink for CTE. In this scenario, considering that, nowadays, the environmental decline is of the highest concerns worldwide, exploring naturally-derived hydrogels has attracted outstanding attention throughout the scientific community. For this reason, a comprehensive review of the naturally-derived hydrogels, commonly employed as bioinks in CTE, was carried out. In particular, the current state of art regarding eco-friendly and natural bioinks’ development for CTE was explored. Overall, this paper gives an overview of 3D bioprinting for CTE to guide future research towards the development of more reliable, customized, eco-friendly and innovative strategies for CTE.

Silver Ion Loaded Agarose-Hyaluronic Acid Hydrogel as a Potential Antibacterial Wound Dressing

Wound infection, especially chronic ones, not only increases the opportunity to generate superbacteria but also imposes significant burden, both physically and mentally, on the patients. Therefore, the development of suitable wound addressing is an important way to deal with this matter. Here in this study, we employed the good gelling property of agarose (AR) and the wound healing promotion effect of hyaluronic acid (HA) to prepare an agarose-hyaluronic acid hydrogel. The AR-HA gel was loaded with silver ion (Ag+ from AgNO3) upon gelling (AR-HA/Ag) and finally applied as a potential wound dressing for antibacterial treatment and healing promotion of wounds. Our results suggested that the AR-HA/Ag hydrogel maintained the antibacterial efficacy of Ag+ while significantly promoted the healing of human umbilical vein endothelial cells (HUVEC) due to the cell proliferation promotion effect of HA. Taken together, AR-HA/Ag might be a potential antibacterial wound dressing for future application in clinic.

Hydrogel-based dressings in the treatment of partial thickness experimentally induced burn wounds in rats

Purpose:

To compare four commercially available hydrogel formulations in the healing of partial thickness burns experimentally induced in rats.

Methods:

Wistar rats were used, and after the burn wound induction they were divided into the following treatment groups: G1) NaCl 0.9%; G2) 1% silver sulfadiazine; G3) Debrigel™; G4) Safgel™; G5) Dersani™; G6) Solosite™. The animals were followed during seven, 14 and 30 days after the injury induction. Morphometric, macroscopic and microscopic evaluations were performed.

Results:

The treatment with Dersani™ induced better results during the inflammatory and proliferative phases of the healing process (p<0.05). The animals treated with Safgel™ presented better scaring in the remodeling phase (p<0.05), and the treatment with Dersani™ and Solosite™ induced greater wound closure (p<0.05).

Conclusions:

The hydrogel-based dressings presented beneficial outcomes in the healing of burn wounds experimentally induced in rats due to their ability in maintain the humidity of the wound, in removing the exudate, in promoting cell migration and collagen production during the different phases of the healing process.

Study of Several Alginate-Based Hydrogels for In Vitro 3D Cell Cultures

Hydrogel, a special system of polymer solutions, can be obtained through the physical/chemical/enzymic crosslinking of polymer chains in a water-based dispersion medium. Different compositions and crosslinking methods endow hydrogel with diverse physicochemical properties. Those hydrogels with suitable physicochemical properties hold manifold functions in biomedical fields, such as cell transplantation, tissue engineering, organ manufacturing, drug releasing and pathological model analysis. In this study, several alginate-based composite hydrogels, including gelatin/alginate (G-A), gelatin/alginate/agarose (G-A-A), fibrinogen/alginate (F-A), fibrinogen/alginate/agarose (F-A-A) and control alginate (A) and alginate/agarose (A-A), were constructed. We researched the advantages and disadvantages of these hydrogels in terms of their microscopic structure (cell living space), water holding capacity, swelling rate, swelling–erosion ratio, mechanical properties and biocompatibility. Briefly, alginate-based hydrogels can be used for three-dimensional (3D) cell culture alone. However, when mixed with other natural polymers in different proportions, a relatively stable network with a good cytocompatibility, mechanical strength and water holding capacity can be formed. The physical and chemical properties of the hydrogels can be adjusted by changing the composition, proportion and cross-linking methods of the polymers. Conclusively, the G-A-A and F-A-A hydrogels are the best hydrogels for the in vitro 3D cell cultures and pathological model construction.

Hydrogels in Burn Wound Management-A Review

Inert hydrogels are of a great importance in burn first aid. Hydrogel dressings may be an alternative to cooling burn wounds with streaming water, especially in cases of mass casualty events, lack of clean water, hypothermia, or large extent of burns. Hydrogels that contain mostly water evacuate the heat cumulating in the skin by evaporation. They not only cool the burn wound, but also reduce pain and protect the wound area from contamination and further injuries. Hydrogels are ideally used during the first hours after injury, but as they do not have antimicrobial properties per se, they might not prevent wound infection. The hydrogel matrix enables incorporating active substances into the dressing. The active forms may contain ammonium salts, nanocrystal silver, zinc, growth factor, cytokines, or cells, as well as natural agents, such as honey or herbs. Active dressings may have antimicrobial activity or stimulate wound healing. Numerous experiments on animal models proved their safety and efficiency. Hydrogels are a new dressing type that are still in development.

Development and Evaluation of Hydrogel Wound Dressings Loaded with Herbal Extracts

The current study aimed to develop carbomer based hydrogel dressings, incorporating ethanolic extracts of Rosmarinus officinalis aerial parts, Achillea millefolium and Calendula officinalis flowers. The pharmaceutical properties of the obtained hydrogels, as well as their texture and antimicrobial activity, were further evaluated. Five wound dressing formulations based on carbopol were prepared. The addition of the ethanolic extracts to the formulation slightly lowered the pH of the hydrogels, as expected. The Rosmarinus officinalis aerial parts extract loaded hydrogel proved to be the firmest one. In terms of consistency and viscosity, the behavior of the five hydrogels was relatively similar. Based on the texture analysis, the texture of the hydrogels has been affected to some extent by the addition of the ethanolic extracts, decreasing their consistency, firmness, and adhesiveness. The hydrogel loaded with Rosmarinus officinalis aerial parts extract and the one incorporating the blend of extracts (mixture of the three above-mentioned extracts) proved to have a good antimicrobial activity. The studied hydrogel formulations could serve as a basis for the development of novel wound dressing materials, although more extended in vivo studies would be needed in order to support current results.

Hydrogels for modified-release drug delivery systems

Hydrogels for the modified-release drug delivery systems is a continuously growing area of interest for the pharmaceutical industry. According to the global market, the use of polymers in this area is projected to reach $31.4 million by 2027. This review discusses the recent advances and perspectives of hydrogel in drug delivery systems for oral, parenteral, nasal, topical, and ophthalmic. The search strategy did in January 2021, and it conducted an extensive database to identify studies published from January 2010 to December 2020.We described the main characteristic of the polymers to obtain an ideal hydrogel for a specific route of administration and the formulations that was a highlight in the literature. It concluded that the hydrogels are a set useful to decrease the number of doses, side effects, promote adhesion of patient and enhances the bioavailability of the drugs improving the safety and efficacy of the treatment.

Functional Hydrogel Dressings for Treatment of Burn Wounds

The therapy of burns is a challenging clinical issue. Burns are long-term injuries, and numerous patients suffer from chronic pain. Burn treatment includes management, infection control, wound debridement and escharotomy, dressing coverage, skin transplantation, and the use of skin substitutes. The future of advanced care of burn wounds lies in the development of “active dressings”. Hydrogel dressings have been employed universally to accelerate wound healing based on their unique properties to overcome the limitations of existing treatment methods. This review briefly introduces the advantages of hydrogel dressings and discusses the development of new hydrogel dressings for wound healing along with skin regeneration. Further, the treatment strategies for burns, ranging from external to clinical, are reviewed, and the functional classifications of hydrogel dressings along with their clinical value for burns are discussed.

Controlled and Local Delivery of Antibiotics by 3D Core/Shell Printed Hydrogel Scaffolds to Treat Soft Tissue Infections

Soft tissue infections in open fractures or burns are major cause for high morbidity in trauma patients. Sustained, long-term and localized delivery of antimicrobial agents is needed for early eradication of these infections. Traditional (topical or systemic) antibiotic delivery methods are associated with a variety of problems, including their long-term unavailability and possible low local concentration. Novel approaches for antibiotic delivery via wound coverage/healing scaffolds are constantly being developed. Many of these approaches are associated with burst release and thus seldom maintain long-term inhibitory concentrations. Using 3D core/shell extrusion printing, scaffolds consisting of antibiotic depot (in the core composed of low concentrated biomaterial ink 3% alginate) surrounded by a denser biomaterial ink (shell) were fabricated. Denser biomaterial ink (composed of alginate and methylcellulose or alginate, methylcellulose and Laponite) retained scaffold shape and modulated antibiotic release kinetics. Release of antibiotics was observed over seven days, indicating sustained release characteristics and maintenance of potency. Inclusion of Laponite in shell, significantly reduced burst release of antibiotics. Additionally, the effect of shell thickness on release kinetics was demonstrated. Amalgamation of such a modular delivery system with other biofabrication methods could potentially open new strategies to simultaneously treat soft tissue infections and aid wound regeneration.

Moist Wound Healing with Commonly Available Dressings

Significance: A moist wound environment has several benefits that result in faster and better quality of healing. It facilitates autolytic debridement, reduces pain, reduces scarring, activates collagen synthesis, facilitates and promotes keratinocyte migration over the wound surface, and supports the presence and function of nutrients, growth factors, and other soluble mediators in the wound microenvironment. Recent Advances: Wound dressings can be utilized to create, maintain, and control a moist environment for healing. Moist wound dressings can be divided into films, foams, hydrocolloids, hydrogels, and alginates. We are also including negative pressure wound therapy systems in the moist dressings. Critical Issues: An optimal wound dressing should provide a moist environment and have an optimal water vapor transmission rate (WVTR) and absorptive capacity. It should also protect the wound against trauma and contamination and be easy to apply, painless to remove, and esthetically acceptable or even pleasing. Future Directions: Interventions, particularly dressing changes, by medical caregivers are labor intensive and expensive and there should be a continuous effort to reduce their number per week. Smart dressings with integrated microsensors and delivery capabilities that would allow wireless real-time monitoring and treatment of the wound would be very advantageous. This way the state of the wound as well as the wear time of the dressing could be assessed without dressing removal or visit to the wound care center. In addition, an ability to adjust the WVTRs to the exudate level of the wound (or having a large absorptive capacity without changing the WVTR) would be useful. This feature would guarantee an optimal level of hydration of the wound surface throughout the treatment.

Cefuroxime-Loaded Hydrogels for Prevention and Treatment of Bacterial Contamination of Open Wounds

Dextran/Sulfodextran-graft-polyacrylamide- and polyacrylamide-based hydrogels were synthesized by radical polymerization and loaded with cefuroxime to obtain antimicrobial wound dressings. Antibiotic release from the antibiotic-loaded hydrogels into an aqueous solution was studied by the HPLC-UV method. It is shown that cefuroxime-loaded Dextran/Sulfodextran-graft-polyacrylamide hydrogels release the antibiotic more slowly compared to polyacrylamide hydrogel with the same density of cross-links. Antibacterial activity of the synthesized materials was tested in vitro against wild strains of S. aureus, E. coli, and Klebsiella spp. The possibility of using the obtained antimicrobial hydrogels for the treatment of infected wounds was confirmed in vivo in a rat model.

Advancements in release-active antimicrobial biomaterials: A journey from release to relief

Escalating medical expenses due to infectious diseases are causing huge socioeconomic pressure on mankind globally. The emergence of antibiotic resistance has further aggravated this problem. Drug-resistant pathogens are also capable of forming thick biofilms on biotic and abiotic surfaces to thrive in a harsh environment. To address these clinical problems, various strategies including antibacterial agent delivering matrices and bactericidal coatings strategies have been developed. In this review, we have discussed various types of polymeric vehicles such as hydrogels, sponges/cryogels, microgels, nanogels, and meshes, which are commonly used to deliver antibiotics, metal nanoparticles, and biocides. Compositions of these polymeric matrices have been elaborately depicted by elucidating their chemical interactions and potential activity have been discussed. On the other hand, various implant/device-surface coating strategies which exploit the release-active mechanism of bacterial killing are discussed in elaboration. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Cardiovascular Disease Implantable Materials and Surgical Technologies > Nanomaterials and Implants Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease.

A Novel Strategy to Coat Dopamine-Functionalized Titanium Surfaces With Agarose-Based Hydrogels for the Controlled Release of Gentamicin

Introduction

The use of spinal implants for the treatment of back disorders is largely affected by the insurgence of infections at the implantation site. Antibacterial coatings have been proposed as a viable solution to limit such infections. However, despite being effective at short-term, conventional coatings lack the ability to prevent infections at medium and long-term. Hydrogel-based drug delivery systems may represent a solution controlling the release of the loaded antibacterial agents while improving cell integration. Agarose, in particular, is a biocompatible natural polysaccharide known to improve cell growth and already used in drug delivery system formulations. In this study, an agarose hydrogel-based coating has been developed for the controlled release of gentamicin (GS).

Methods

Sand blasted Ti6Al4V discs were grafted with dopamine (DOPA) solution. After, GS loaded agarose hydrogels have been produced and additioned with tannic acid (TA) and calcium chloride (CaCl₂) as crosslinkers. The different GS-loaded hydrogel formulations were deposited on Ti6Al4V-DOPA surfaces, and allowed to react under UV irradiation. Surface topography, wettability and composition have been analyzed with profilometry, static contact angle measurement, XPS and FTIR spectroscopy analyses. GS release was performed under pseudo-physiological conditions up to 28 days and the released GS was quantified using a specific ELISA test. The cytotoxicity of the produced coatings against human cells have been tested, along with their antibacterial activity against S. aureus bacteria.

Results

A homogeneous coating was obtained with all the hydrogel formulations. Moreover, the coatings presented a hydrophilic behavior and micro-scale surface roughness. The addition of TA in the hydrogel formulations showed an increase in the release time compared to the normal GS-agarose hydrogels. Moreover, the GS released from these gels was able to significantly inhibit S. aureus growth compared to the GS-agarose hydrogels. The addition of CaCl₂ to the gel formulation was able to significantly decrease cytotoxicity of the TA-modified hydrogels.

Conclusions

Due to their surface properties, low cytotoxicity and high antibacterial effects, the hereby proposed gentamicin-loaded agarose-hydrogels provide new insight, and represent a promising approach for the surface modification of spinal implants, greatly impacting their application in the orthopedic surgical scenario.

Enlightenment of Growth Plate Regeneration Based on Cartilage Repair Theory: A Review

The growth plate (GP) is a cartilaginous region situated between the epiphysis and metaphysis at the end of the immature long bone, which is susceptible to mechanical damage because of its vulnerable structure. Due to the limited regeneration ability of the GP, current clinical treatment strategies (e.g., bone bridge resection and fat engraftment) always result in bone bridge formation, which will cause length discrepancy and angular deformity, thus making satisfactory outcomes difficult to achieve. The introduction of cartilage repair theory and cartilage tissue engineering technology may encourage novel therapeutic approaches for GP repair using tissue engineered GPs, including biocompatible scaffolds incorporated with appropriate seed cells and growth factors. In this review, we summarize the physiological structure of GPs, the pathological process, and repair phases of GP injuries, placing greater emphasis on advanced tissue engineering strategies for GP repair. Furthermore, we also propose that three-dimensional printing technology will play a significant role in this field in the future given its advantage of bionic replication of complex structures. We predict that tissue engineering strategies will offer a significant alternative to the management of GP injuries.

Mussel-inspired agarose hydrogel scaffolds for skin tissue engineering

Polysaccharide hydrogels are widely used in tissue engineering because of their superior biocompatibility and low immunogenicity. However, many of these hydrogels are unrealistic for practical applications as the cost of raw materials is high, and the fabrication steps are tedious. This study focuses on the facile fabrication and optimization of agarose-polydopamine hydrogel (APG) scaffolds for skin wound healing. The first study objective was to evaluate the effects of polydopamine (PDA) on the mechanical properties, water holding capacity and cell adhesiveness of APG. We observed that APG showed decreased rigidity and increased water content with the addition of PDA. Most importantly, decreased rigidity translated into significant increase in cell adhesiveness. Next, the slow biodegradability and high biocompatibility of APG with the highest PDA content (APG3) was confirmed. In addition, APG3 promoted full-thickness skin defect healing by accelerating collagen deposition and promoting angiogenesis. Altogether, we have developed a straightforward and efficient strategy to construct functional APG scaffold for skin tissue engineering, which has translation potentials in clinical practice.

Nanotechnological strategies for systemic microbial infections treatment: A review

Systemic infections is one of the major causes of mortality worldwide, and a shortage of drug approaches applied for the rapid and necessary treatment contribute to increase the levels of death in affected patients. Several drug delivery systems based in nanotechnology such as metallic nanoparticles, liposomes, nanoemulsion, microemulsion, polymeric nanoparticles, solid lipid nanoparticles, dendrimers, hydrogels and liquid crystals can contribute in the biological performance of active substances for the treatment of microbial diseases triggered by fungi, bacteria, virus and parasites. In the presentation of these statements, this review article present and demonstrate the effectiveness of these drug delivery systems for the treatment of systemic diseases caused by several microorganisms, through a review of studies on scientific literature worldwide that contributes to better information for the most diverse professionals from the areas of health sciences. The studies demonstrated that the drug delivery systems described can contribute to the therapeutic scenario of these diseases, being classified as safe, active platforms and with therapeutic versatility.

Tetraethyl Orthosilicate-Based Hydrogels for Drug Delivery-Effects of Their Nanoparticulate Structure on Release Properties

Tetraethyl orthosilicate (TEOS)-based hydrogels, with shear stress response and drug releasing properties, can be formulated simply by TEOS hydrolysis followed by volume corrections with aqueous solvents and pH adjustments. Such basic thixotropic hydrogels (thixogels) form via the colloidal aggregation of nanoparticulate silica. Herein, we investigated the effects of the nanoparticulate building blocks on the drug release properties of these materials. Our data indicate that the age of the hydrolyzed TEOS used for the formulation impacts the nanoparticulate structure and stiffness of thixogels. Moreover, the mechanism of formation or the disturbance of the nanoparticulate network significantly affects the release profiles of the incorporated drug. Collectively, our results underline the versatility of these basic, TEOS-only hydrogels for drug delivery applications.

Dual drug delivery system based on pH-sensitive silk fibroin/alginate nanoparticles entrapped in PNIPAM hydrogel for treating severe infected burn wound

Herein, the pH-sensitive vancomycin (VANCO) loaded silk fibroin-sodium alginate nanoparticles (NPs) embedded in poly(N-isopropylacrylamide) (PNIPAM) hydrogel containing epidermal growth factor (EGF) are introduced for treating chronic burn wound infections. The hybrid system was developed to control the release rates of an antibiotic and growth factor for optimal treatment of burn infections. VANCO had a pH responsive release behavior from the nanoparticle (NP) and showed higher release rate in an alkaline pH compared to the neutral pH during 10 d. About 30% of EGF was also released from the hydrogel within 20 d. The released VANCO and EGF preserved their bioactivity more than ∼ 80%. The suitable physico-chemical properties and cellular behaviors of PNIPAM hydrogel supported the proliferation and growth of the fibroblast cells. Furthermore, the higher re-epithelialization with good wound contraction rate, neovascular formation, and expression of transforming growth factor-beta were observed in S. aureus infected rat burn wound by using the hydrogel containing VANCO and EGF compared with untreated wounds and hydrogel alone. The wound infection was also significantly reduced in the groups treated with the hydrogels containing VANCO. Overall, in vitro and in vivo results suggested that developed hybrid system would be a promising construct to treat severe wound infection.

Agarose-based biomaterials for advanced drug delivery

Agarose is a prominent marine polysaccharide representing reversible thermogelling behavior, outstanding mechanical properties, high bioactivity, and switchable chemical reactivity for functionalization. As a result, agarose has received particular attention in the fabrication of advanced delivery systems as sophisticated carriers for therapeutic agents. The ever-growing use of agarose-based biomaterials for drug delivery systems resulted in rapid growth in the number of related publications, however still, a long way should be paved to achieve FDA approval for most of the proposed products. This review aims at a classification of agarose-based biomaterials and their derivatives applicable for controlled/targeted drug delivery purposes. Moreover, it attempts to deal with opportunities and challenges associated with the future developments ahead of agarose-based biomaterials in the realm of advanced drug delivery. Undoubtedly, this class of biomaterials needs further advancement, and a lot of critical questions have yet to be answered.

Agarose-Based Biomaterials: Opportunities and Challenges in Cartilage Tissue Engineering

The lack of adequate blood/lymphatic vessels as well as low-potential articular cartilage regeneration underlines the necessity to search for alternative biomaterials. Owing to their unique features, such as reversible thermogelling behavior and tissue-like mechanical behavior, agarose-based biomaterials have played a key role in cartilage tissue repair. Accordingly, the need for fabricating novel highly efficient injectable agarose-based biomaterials as hydrogels for restoration of injured cartilage tissue has been recognized. In this review, the resources and conspicuous properties of the agarose-based biomaterials were reviewed. First, different types of signals together with their functionalities in the maintenance of cartilage homeostasis were explained. Then, various cellular signaling pathways and their significant role in cartilage tissue engineering were overviewed. Next, the molecular structure and its gelling behavior have been discussed. Eventually, the latest advancements, the lingering challenges, and future ahead of agarose derivatives from the cartilage regeneration perspective have been discussed.

Photodisinfection effects of silver sulfadiazine nanoliposomes doped-curcumin on Acinetobacter baumannii: a mouse model

Aim: To evaluate the antimicrobial effects of photoexcited silver sulfadiazine nanoliposomes (AgSD-NLs) doped by curcumin (AgSD-NLs@Cur) on Acinetobacter baumannii. Materials & methods: Following characterization, the cytotoxic and hemolytic activities of AgSD-NLs@Cur were evaluated. The antimicrobial activities of AgSD-NLs@Cur-mediated antimicrobial photodynamic therapy (aPDT) were determined. Histopathological examination of the burn wound sites of infected mice treated with photoexcited AgSD-NLs@Cur was assessed. Results: No significant cytotoxic and hemolytic activities were observed. There was a decrease in the Acinetobacter baumannii count in planktonic and biofilm forms and the gene expression level using AgSD-NLs@Cur-aPDT (p < 0.05). Histopathological analysis indicated the epidermis developed markedly and the bacterial load decreased significantly after aPDT. Conclusion: Photoexcited AgSD-NLs@Cur has an antimicrobial potential against A. baumannii.