Comparison of the nucleotide sequences of the vegetative replication origins of broad host range IncP plasmids R751 and RK2 reveals conserved features of probable functional importance

Wastewater bacterial communities bring together broad-host range plasmids, integrons and a wide diversity of uncharacterized gene cassettes

To investigate the mobile gene pool present in wastewater environments, total community DNA was obtained from two distinct raw effluents: urban and slaughterhouse wastewaters. Bacterial community structure was evaluated by DGGE analysis of 16S rRNA gene fragments. Detection of broad-host-range plasmid sequences and integrase encoding genes was carried out through PCR and Southern hybridization. Gene cassette libraries were obtained using primers targeting consensus sequences that flank gene cassettes. Analysis of DGGE profiles revealed a complex and distinct bacterial community among effluents (similarity<25%). Despite that, All plasmid-specific sequences searched (rep for IncN, trfA for IncP-1 and oriV for IncQ and IncW) and integrase genes were present in both effluents. Gene cassettes recovered from clone libraries showed low homology with genes encoding putative enzymes involved in the metabolism of amino sugars, cell wall synthesis, motility, gene regulation, intercellular signalling and secretion pathways and in the synthesis of cellulose, folic acid and antibiotics. Additionally, in the majority of clones, no identifiable open reading frames homologues were found in the databases. According to our results, wastewater environments promote the development of bacterial communities that support and bring together different types of molecular elements that, in association, play a major role in bacterial adaptation and evolution.

Sequence of the 68,869 bp IncP-1alpha plasmid pTB11 from a waste-water treatment plant reveals a highly conserved backbone, a Tn402-like integron and other transposable elements

To analyse the significance of conjugative broad-host-range IncP-1alpha plasmids for the spread of antibiotic resistance determinants in waste-water treatment plants we isolated and characterised five different IncP-1alpha plasmids from bacteria of activated sludge and the final effluents of a municipal waste-water treatment plant. These plasmids mediate resistance to ampicillin, cefaclor, cefuroxime, gentamicin, kanamycin, spectinomycin, streptomycin, tetracycline, tobramycin, and trimethoprim. The complete 68,869 bp DNA-sequence of the IncP-1alpha plasmid pTB11 was determined. The pTB11 backbone modules for replication (Rep), mating pair formation (Trb), multimer resolution (Mrs), post-segregational killing (Psk), conjugative DNA-transfer (Tra), plasmid control (Ctl), and stable maintenance and inheritance (KilA, KilE, and KilC) are highly conserved as compared to the 'Birmingham' IncP-1alpha plasmids. In contrast to the 'Birmingham' plasmids pTB11 carries an insert of a Tn402-derivative integrating a class 1 integron in the intergenic region between the multimer resolution operon parCBA and the post-segregational killing operon parDE. The integron comprises the resistance gene cassettes oxa2 (beta-lactamase), aacA4 (aminoglycoside-6'N-acetyltransferase), and aadA1 (aminoglycoside-3'-adenylyltransferase) and a complete tniABQR transposition module. Integron-specific sequences were also identified on other IncP-1alpha plasmids analysed in this work. In contrast to the 'Birmingham' plasmids the pTB11 tetracycline resistance module carries a pecM- and a pncA-like gene downstream of the tetracycline resistance gene tetA and contains an insertion of the new insertion sequence element ISTB11. The transposable elements IS21 and Tn1 which disrupted, respectively, orf7 and klcB on the 'Birmingham' plasmids are not present on pTB11. Identification of IncP-1alpha plasmids in bacteria of the waste-water treatment plant's final effluents indicates that bacteria carrying these kind of plasmids are released into the environment.

Horizontal transfer of dehalogenase genes on IncP1beta plasmids during bacterial adaptation to degrade alpha-halocarboxylic acids

The diversity of bacterial alpha-halocarboxylic acid (alphaHA) dehalogenases from a polluted soil was investigated. Polymerase chain reaction (PCR) primers designed to amplify group I and group II dehalogenase (deh) gene sequences were used to screen bacterial isolates, nine beta-Proteobacteria and one gamma-Proteobacterium, from soil enrichments. Primers successfully amplified deh sequences from all 10 alphaHA-utilising isolates. Bacteria isolated at 15 or 30 degrees C on chloroacetic acid or 2-chloropropionic acid from the same polluted soil were shown to contain up to four plasmids, some of these common between isolates. Analysis of deletion mutants and Southern hybridisation showed that each isolate contained an apparently identical IncP1beta plasmid c. 80 kb in size, carrying group I deh genes in addition to an associated insertion sequence element. Moreover, an identical conjugative catabolic plasmid was isolated exogenously in several transconjugants independently selected from biparental matings between Ralstonia eutropha JMP222 and enrichment samples. PCR cloning and sequencing of deh genes directly from enrichment cultures inoculated with the same soil revealed that an identical deh gene was present in both primary, secondary and tertiary enrichment cultures, although this deh could not be amplified directly from soil. Two alphaHA-utilising bacteria isolated at lower temperature were found also to contain group II deh genes. Transfer of the deh catabolic phenotype to R. eutropha strain JMP222 occurred at high frequencies for four strains tested, a result that was consistent with assignment of the plasmids to the IncP1 incompatibility group. The promiscuous nature and broad host range of IncP plasmids make them likely to be involved in horizontal gene transfer during adaptation of bacteria to degrade organohalogens.

Sequences of versatile broad-host-range vectors of the RK2 family

Plasmid pRK404-a smaller derivative of RK2-is a tetracycline-resistant broad-host-range vector that carries a multiple cloning site and the lacZ(alpha) peptide that enables blue/white selection for cloned inserts in Escherichia coli. We present herein the complete and annotated sequence of pRK404 and three related vectors-pRK437, pRK442, and pRK442(H). These derivatives have proven to be valuable tools for genetic manipulation in Gram-negative bacteria. The knowledge of their complete sequences will facilitate efficient future engineering of them and will enhance their general applicability to the design of genetic systems for use in organisms for which new genomic sequence data are becoming available.

Complete sequence of the IncPbeta plasmid R751: implications for evolution and organisation of the IncP backbone

The broad host range IncP plasmids are of particular interest because of their ability to promote gene spread between diverse bacterial species. To facilitate study of these plasmids we have compiled the complete sequence of the IncPbeta plasmid R751. Comparison with the sequence of the IncPalpha plasmids confirms the conservation of the IncP backbone of replication, conjugative transfer and stable inheritance functions between the two branches of this family. As in the IncPalpha genome the DNA of this backbone appears to have been enriched for the GCCG/CGGC motifs characteristic of the genome of organisms with a high G+C content, such as P. aeruginosa, suggesting that IncPbeta plasmids have been subjected during their evolution to similar mutational and selective forces as IncPalpha plasmids and may have evolved in pseudomonad hosts. The IncP genome is consistently interrupted by insertion of phenotypic markers and/or transposable elements between oriV and trfA and between the tra and trb operons. The R751 genome reveals a family of repeated sequences in these regions which may form the basis of a hot spot for insertion of foreign DNA. Sequence analysis of the cryptic transposon Tn4321 revealed that it is not a member of the Tn21 family as we had proposed previously from an inspection of its ends. Rather it is a composite transposon defined by inverted repeats of a 1347 bp IS element belonging to a recently discovered family which is distributed throughout the prokaryotes. The central unique region of Tn4321 encodes two predicted proteins, one of which is a regulatory protein while the other is presumably responsible for an as yet unidentified phenotype. The most striking feature of the IncPalpha plasmids, the global regulation of replication and transfer by the KorA and KorB proteins encoded in the central control operon, is conserved between the two plasmids although there appear to be significant differences in the specificity of repressor-operator interactions. The importance of these global regulatory circuits is emphasised by the observation that the operator sequences for KorB are highly conserved even in contexts where the surrounding region, either a protein coding or intergenic sequence, has diverged considerably. There appears to be no equivalent of the parABCDE region which in the IncPalpha plasmids provides multimer resolution, lethality to plasmid-free segregants and active partitioning functions. However, we found that the continuous sector from co-ordinate 0 to 9100 bp, encoding the co-regulated klc and kle operons as well as the central control region, could confer a high degree of segregational stability on a low copy number test vector. Thus R751 appears to exhibit very clearly what was first revealed by study of the IncPalpha plasmids, namely a fully functional co-ordinately regulated set of replication, transfer and stable inheritance functions.

Divergence and conservation of the partitioning and global regulation functions in the central control region of the IncP plasmids RK2 and R751

The central control region (Ctl) of IncP plasmids is associated with two phenotypes: the coordinate expression of replication and transfer genes; and the ability to increase the segregational stability of a low-copy number test plasmid. This region of the IncP beta plasmid R751 shows significant sequence divergence from the IncP alpha plasmid RK2 sequence, and two genes, korF and korG, present in the IncP alpha region are missing in the IncP beta Ctl. In other respects the organization of the Ctl is basically the same. Although the two key global regulatory genes korA and korB are highly conserved, studies on their ability to repress transcription from a variety of IncP alpha and IncP beta plasmid promoters suggest differences in operator recognition by KorA and synergy with other repressors. The products of kfrA, upf54.8 and upf54.4 genes are conserved; KfrA shows least conservation and, while retaining the ability to act as a transcriptional repressor, appears to have completely different DNA-binding specificity. The genes required for the plasmid segregational stabilization (partitioning) phenotype--incC, korB and the korB operator OB3--are conserved and contribute to a more efficient plasmid stabilization than the IncP alpha equivalents. This may indicate that the Ctl plays an especially important role in partitioning of IncP beta plasmids, since they lack the second stability region (parlmrs) found in IncP alpha plasmids.

Evolution of the korA-oriV segment of promiscuous IncP plasmids

Plasmids belonging to Escherichia coli incompatibility group P are of particular interest because they can transfer between, and be stably maintained in, almost all Gram-negative bacterial species. The segment of the IncP alpha plasmid genome between the key regulatory gene korA and the vegetative replication origin, oriV, encodes a series of operons co-regulated with replication and transfer functions by the KorA protein. To determine which of these genes are likely to have an important role in IncP plasmid survival the equivalent region of the distantly related IncP beta plasmid R751 was sequenced. Sequence comparisons show that the kla operon (formerly the kilA locus, which is also responsible for a cryptic tellurite-resistance determinant) is completely absent from R751. Similarly in the kle region, which encodes genes associated with the KilE+ phenotype of unknown function, kleC and kleD, which we proposed arose by a duplication of kleA and kleB, are also completely absent. The genes that are conserved are klcA (formerly kilC, responsible for the KilC+, and recently proposed to be involved in overcoming restriction barriers during transfer), klcB (an ORF interrupted by Tn1 insertion in RK2), korC (a transcriptional repressor which controls the klcK and kle operons), and kleA, kleB, kleE and kleF. A striking feature of the organization in R751 is the lack of the strong transcriptional termination signals which are present in IncP alpha plasmids. The degree of divergence between the plasmids facilitates the identification of motifs of probable functional importance in the primary protein sequences.

Catabolic transposons

The structure and function of transposable elements that code for catabolic pathways involved in the biodegradation of organic compounds are reviewed. Seven of these catabolic transposons have structural features that place them in the Class I (composite) or Class II (Tn3-family) bacterial elements. One is a conjugative transposon. Another three have been found to have properties of transposable elements but have not been characterized sufficiently to assign to a known class. Structural features of the toluene (Tn4651/Tn4653) and naphthalene (Tn4655) elements that illustrate the enormous potential for acquisition, deletion and rearrangement of DNA within catabolic transposons are discussed. The recently characterized chlorobenzoate (Tn5271) and chlorobenzene (Tn5280) catabolic transposons encode different aromatic ring dioxygenases, however they both illustrate the constraints that must be overcome when recipients of catabolic transposons assemble and regulate complete metabolic pathways for environmental pollutants. The structures of the chlorobenzoate catabolic transposon Tn5271 and the related haloacetate dehalogenase catabolic element of plasmid pUO1 are compared and a hypothesis for their formation is discussed. The structures and activities of catabolic transposons of unknown class coding for the catabolism of halogenated alkanoic acids (DEH) and chlorobiphenyl (Tn4371) are also reviewed.

Cloning and characterization of the Inc A/C plasmid RA1 replicon

The Inc A/C plasmids, like Inc P and Inc Q plasmids, have a broad host range. However, their maintenance functions remain to be studied. An autoreplicative region of 2.79 kb named RepA/C, able to replicate both in the family Enterobacteriaceae and in Pseudomonas spp., was isolated and sequenced. The stability, copy number, and incompatibility expression of this replicon were determined. RepA/C and a nonautoreplicative fragment of 16 kb of this replicon were used as probes and showed specific hybridizations with the Inc P3-A/C plasmids from Pseudomonas spp. and members of the Enterobacteriaceae. These probes could be used as tools for identification of the plasmids of this epidemiologically important Inc group.

Complete nucleotide sequence of a Selenomonas ruminantium plasmid and definition of a region necessary for its replication in Escherichia coli

A plasmid from Selenomonas ruminantium subspecies lactilytica has been subcloned in Escherichia coli K-12 and completely sequenced. Three open reading frames (ORFs) of 909, 801, and 549 bp were identified and the complete sequence was analyzed by comparison with DNA and protein databases. No significant deoxynucleotide or amino acid sequence homology with other published genes or proteins was detected. The plasmid was shown to replicate independently in E. coli K-12 by a DNA polymerase I-dependent mechanism and deletion analysis defined the DNA sequence responsible for this phenotype.

The replication origin of the Methylomonas clara plasmid pBE-2

The Methylomonas clara narrow host range plasmids pBE-2 and pBE-3 belong to the class of plasmids encoding a trans acting replication initiation factor. Characteristically for such plasmids, the sequence of the origin of pBE-2 and pBE-3 contains a number of large direct repeats (8 and a half iterons of 19 bp), which by analogy are putative binding sites of the trans acting replication factor. Several additional features typical for the majority of E. coli plasmids were found in the M. clara origin: These include sequences homologous to the E. coli DnaA-box, sequences resembling E. coli IHF binding-sites, an AT-rich region with short repeats (similar to those repeats of E. coli origins responsible for an initial DNA duplex opening), and an AT-rich bent DNA region containing inverted repeats which have homology to small repeated sequences found in several plasmid origins. In addition, in the M. clara plasmid origin, large potential hairpin structures are present and the sequence of one of these participates in site specific recombination.

Nucleotide sequence and organization of genes flanking the transfer origin of promiscuous plasmid RP4

The nucleotide sequence of the relaxase operon and the leader operon which are part of the Tra1 region of the promiscuous plasmid RP4 was determined. These two polycistronic operons are transcribed divergently from an intergenic region of about 360 bp containing the transfer origin and six close-packed genes. A seventh gene completely overlaps another one in a different reading frame. Conjugative DNA transfer proceeds unidirectionally from oriT with the leader operon heading the DNA to be transferred. The traI gene of the relaxase operon includes within its 3' terminal region a promoter controlling the 7.2-kb polycistronic primase operon. Comparative sequence analysis of the closely related IncP plasmid R751 revealed a similarity of 74% at the nucleotide sequence level, indicating that RP4 and R751 have evolved from a common ancestor. The gene organization of relaxase- and leader operons is conserved among the two IncP plasmids. The transfer origins and the genes traJ and traK exhibit greater sequence divergence than the other genes of the corresponding operons. This is conceivable, because traJ and traK are specificity determinants, the products of which can only recognize homologous oriT sequences. Surprisingly, the organization of the IncP relaxase operons resembles that of the virD operon of Agrobacterium tumefaciens plasmid pTiA6 that mediates DNA transfer to plant cells by a process analogous to bacterial conjugation. Furthermore, the IncP TraG proteins and the product of the virD4 gene share extended amino acid sequence similarity, suggesting a functional relationship.

Replication of plasmids in gram-negative bacteria

Replication of plasmid deoxyribonucleic acid (DNA) is dependent on three stages: initiation, elongation, and termination. The first stage, initiation, depends on plasmid-encoded properties such as the replication origin and, in most cases, the replication initiation protein (Rep protein). In recent years the understanding of initiation and regulation of plasmid replication in Escherichia coli has increased considerably, but it is only for the ColE1-type plasmids that significant biochemical data about the initial priming reaction of DNA synthesis exist. Detailed models have been developed for the initiation and regulation of ColE1 replication. For other plasmids, such as pSC101, some hypotheses for priming mechanisms and replication initiation are presented. These hypotheses are based on experimental evidence and speculative comparisons with other systems, e.g., the chromosomal origin of E. coli. In most cases, knowledge concerning plasmid replication is limited to regulation mechanisms. These mechanisms coordinate plasmid replication to the host cell cycle, and they also seem to determine the host range of a plasmid. Most plasmids studied exhibit a narrow host range, limited to E. coli and related bacteria. In contrast, some others, such as the IncP plasmid RK2 and the IncQ plasmid RSF1010, are able to replicate in nearly all gram-negative bacteria. This broad host range may depend on the correct expression of the essential rep genes, which may be mediated by a complex regulatory mechanism (RK2) or by the use of different promoters (RSF1010). Alternatively or additionally, owing to the structure of their origin and/or to different forms of their replication initiation proteins, broad-host-range plasmids may adapt better to the host enzymes that participate in initiation. Furthermore, a broad host range can result when replication initiation is independent of host proteins, as is found in the priming reaction of RSF1010.

Replication of mini RK2 plasmid in extracts of Escherichia coli requires plasmid-encoded protein TrfA and host-encoded proteins DnaA, B, G DNA gyrase and DNA polymerase III

Soluble extracts of Escherichia coli capable of carrying out replication of the mini-RK2 derivative pCT461 have been prepared from cells carrying this plasmid or from plasmid-free bacteria. The latter are dependent upon exogenously added plasmid-encoded replication protein (TrfA) and require additional DnaA protein for optimum activity. This dependence upon DnaA was confirmed by the failure of DnaA-deficient cell extracts to support replication of pCT461 in the absence of added DnaA protein. Replication is unidirectional and begins at or near oriV, the vegetative replication origin of RK2. DNase I protection studies with purified TrfA indicate that this protein acts by binding to short (17 base-pairs) directly repeated DNA sequences present in oriV. The in vitro replication is resistant to rifampicin but can be abolished by antibodies against DnaG protein (E. coli primase) or DnaB protein (helicase) and by DNA gyrase inhibitors. Inhibition by arabinosyl-CTP suggests that DNA polymerase III is responsible for elongation of nascent DNA strands. These results are discussed in relation to the mechanism of RK2 replication and in the context of the host range of the plasmid.

Molecular genetic analysis of bacterial plasmid promiscuity

The molecular genetic basis of the promiscuity of the wide host range conjugative IncP-1 alpha plasmids has been investigated by transposon mutagenesis and by the construction of minireplicons. The former has identified the origin of plasmid vegetative replication, the replication genes needed for initiation of plasmid replication, the DNA primase gene and a gene encoding a polypeptide of 52 kDa and mapping near the origin of plasmid transfer as all contributing to promiscuity. Minireplicon constructions confirm this conclusion but in addition establish that the origins of replication, transfer and other genomic regions produce complex interactions with respect to host range. DNA sequence analysis within the origin of replication show that the first direct repeat of the cluster of five repeats and sequences immediately 5' to it appear to be required in some (Escherichia coli) but not in other (Pseudomonas aeruginosa) hosts for plasmid replication.

Identification and classification of bacterial plasmids

Images

Nucleotide sequence of korB, a replication control gene of broad host-range plasmid RK2

The korB gene is a major regulatory element in the replication and maintenance of broad host-range plasmid RK2. It negatively controls the replication gene trfA, the host-lethal determinants kilA and kilB, and the korA-korB operon. Here, we present the nucleotide sequence of an 1167 base-pair region that encodes korB. Using sequence data from korB mutants, we identified the korB structural gene. The predicted polypeptide product is negatively charged and has a molecular weight of 39,015, which is considerably less than that estimated by its electrophoretic mobility in SDS/polyacrylamide gels. Secondary-structure predictions of korB polypeptide revealed three closely spaced helix-turn-helix regions with significant homology to similar structures in known DNA-binding proteins. The korB gene, like all other sequenced RK2 genes, shows a strong preference for codons ending in a G or C residue. This is similar to codon usage by genes of Klebsiella and Pseudomonas, the original hosts for RK2 and some closely related plasmids. We also sequenced the site of transposon Tn76 insertion in the host-range mutant pRP761 and found it to be located immediately upstream from korB in the incC gene. Finally, we report the presence of sequences resembling a replication origin within the korB structural gene: a cluster of four 19 base-pair direct repeats and a nearby potential binding site for Escherichia coli dna A replication protein.

Comparison of the organisation of the genomes of phenotypically diverse plasmids of incompatibility group P: members of the IncP beta sub-group are closely related

Comparison of physical maps of the broad host range plasmids R751, R906 and R772, belonging to the IncP beta sub-group of the Escherichia coli incompatibility group P, reveals two large regions of similarity, separated by dissimilar regions which contain the majority of the cleavage sites for restriction endonucleases with hexanucleotide recognition sites. Mapping of the regions of these plasmids which show homology to probes specific for genetically characterised segments of the distantly related IncP alpha plasmid RK2, involved in plasmid maintenance or conjugal transfer, reveals that all four plasmids share a similar genetic organisation. In each case the homologous plasmid backbone is interrupted by heterologous segments both between the essential replication loci oriV and trfA, and between the conjugal transfer regions tra1 and tra2, although in the case of R772 the segment of the backbone carrying the trfA and tra2 regions is inverted relative to that of the other plasmids. However, in the case of pJP4, shown to be a fourth member of the IncP beta sub-group, the backbone is interrupted only by a single large segment adjacent to the trfA region. Mapping of the regions of the four IncP beta plasmids which show homology to Tn501 and nucleotide sequence determination at the ends of the homologous regions reveals that R906, R772 and pJP4 share a common mercury resistance region. This region, which appears to have been inactivated in R772, was probably inserted into a common ancestor of these plasmids by the transposition of an element related to an ancestor of Tn501. R751 shows no trace of the mercury resistance region, but contains a short relict of Tn501, derived from an independent insertion event.