Influence of monovalent cations on the activity of T4 DNA ligase in the presence of polyethylene glycol

A polyethylene glycol enhanced ligation-triggered self-priming isothermal amplification for the detection of SARS-CoV-2 D614G mutation

We presented a polyethylene glycol (PEG) enhanced ligation-triggered self-priming isothermal amplification (PEG-LSPA) for the detection D614G mutation in S-glycoprotein of SARS-CoV-2. PEG was employed to improve the ligation efficiency of this assay by constructing a molecular crowding environment. Two hairpin probes (H1 and H2) were designed to contain 18 nt and 20 nt target binding site at their 3' end and 5' end, respectively. In presence of target sequence, it complemented with H1 and H2 to trigger ligation by ligase under molecular crowding condition to form ligated H1-H2 duplex. Then 3' terminus of the H2 would be extended by DNA polymerase under isothermal conditions to form a longer extended hairpin (EHP1). 5' terminus of EHP1 with phosphorothioate (PS) modification could form hairpin structure due to the lower Tm value. The resulting 3' end overhang would also fold back as a new primer to initiate the next round of polymerization, resulting in the formation of a longer extended hairpin (EHP2) containing two target sequence domains. In the circle of LSPA, long extended hairpin (EHPx) containing numerous target sequence domains was produced. The resulting DNA products can be monitored in real-time fluorescence signaling. Our proposed assay owns an excellent linear range from 10 fM to 10 nM with a detection limit down to 4 fM. Thus, this work provides a potential isothermal amplification method for monitoring mutations in SARS-CoV-2 variants.

Investigation of the Basic Steps in the Chromosome Conformation Capture Procedure

A constellation of chromosome conformation capture methods (С-methods) are an important tool for biochemical analysis of the spatial interactions between DNA regions that are separated in the primary sequence. All these methods are based on the long sequence of basic steps of treating cells, nuclei, chromatin, and finally DNA, thus representing a significant technical challenge. Here, we present an in-depth study of the basic steps in the chromatin conformation capture procedure (3С), which was performed using Drosophila Schneider 2 cells as a model. We investigated the steps of cell lysis, nuclei washing, nucleoplasm extraction, chromatin treatment with SDS/Triton X-100, restriction enzyme digestion, chromatin ligation, reversion of cross-links, DNA extraction, treatment of a 3C library with RNases, and purification of the 3C library. Several options were studied, and optimal conditions were found. Our work contributes to the understanding of the 3C basic steps and provides a useful guide to the 3C procedure.

It is time to crowd your cell culture media - Physicochemical considerations with biological consequences

In vivo, the interior and exterior of cells is populated by various macromolecules that create an extremely crowded milieu. Yet again, in vitro eukaryotic cell culture is conducted in dilute culture media that hardly imitate the native tissue density. Herein, the concept of macromolecular crowding is discussed in both intracellular and extracellular context. Particular emphasis is given on how the physicochemical properties of the crowding molecules govern and determine kinetics, equilibria and mechanism of action of biochemical and biological reactions, processes and functions. It is evidenced that we are still at the beginning of appreciating, let alone effectively implementing, the potential of macromolecular crowding in permanently differentiated and stem cell culture systems.

A single-molecule sequencing assay for the comprehensive profiling of T4 DNA ligase fidelity and bias during DNA end-joining

DNA ligases are key enzymes in molecular and synthetic biology that catalyze the joining of breaks in duplex DNA and the end-joining of DNA fragments. Ligation fidelity (discrimination against the ligation of substrates containing mismatched base pairs) and bias (preferential ligation of particular sequences over others) have been well-studied in the context of nick ligation. However, almost no data exist for fidelity and bias in end-joining ligation contexts. In this study, we applied Pacific Biosciences Single-Molecule Real-Time sequencing technology to directly sequence the products of a highly multiplexed ligation reaction. This method has been used to profile the ligation of all three-base 5′-overhangs by T4 DNA ligase under typical ligation conditions in a single experiment. We report the relative frequency of all ligation products with or without mismatches, the position-dependent frequency of each mismatch, and the surprising observation that 5′-TNA overhangs ligate extremely inefficiently compared to all other Watson–Crick pairings. The method can easily be extended to profile other ligases, end-types (e.g. blunt ends and overhangs of different lengths), and the effect of adjacent sequence on the ligation results. Further, the method has the potential to provide new insights into the thermodynamics of annealing and the kinetics of end-joining reactions.

Ligation and Ligases

DNA ligases are used chiefly to create novel combinations of nucleic acid molecules and to attach them to vectors before molecular cloning. They are either of bacterial origin or bacteriophage encoded and have different properties, as discussed here.

XNA ligation using T4 DNA ligase in crowding conditions

T4 DNA ligase is capable of ligating 2'OMe-RNA duplexes, HNA, LNA and FANA mixed sequences in the presence of 10% w/v PEG8000 and 3 M betaine. The enzymatic joining of oligonucleotides containing multiple consecutive XNA nucleotides at the ligation site has not been reported before.

Pol I DNA polymerases stimulate DNA end-joining by Escherichia coli DNA ligase

Klenow and Klentaq are the large fragment domains of the Pol I DNA polymerases from Escherichia coli and Thermus aquaticus, respectively. Herein, we show that both polymerases can significantly stimulate complementary intermolecular end-joining ligations by E.coli DNA ligase when the polymerases are present at concentrations lower than that of the DNA substrates. In contrast, high polymerase concentrations relative to the DNA substrates inhibit the intermolecular ligation activity of DNA ligase. Neither polymerase was able to stimulate the DNA ligase from T4 bacteriophage. Additionally, nick-closure by E. coli DNA ligase (but not T4 ligase) is slightly stimulated by both polymerases, but only at about 10% of the magnitude seen for end-joining enhancement. The data represent one of the first observations of direct polymerase-ligase interactions in prokaryotes, and suggest that the polymerases stabilize the associated DNA ends during intermolecular ligation, and that such a complex can be taken advantage of by some, but not all, DNA ligases.

Kinetics of T3-DNA Ligase-Catalyzed Phosphodiester Bond Formation Measured Using the α-Hemolysin Nanopore

The latch region of the wild-type α-hemolysin (α-HL) protein channel can be used to distinguish single base modifications in double-stranded DNA (dsDNA) via ion channel measurements upon electrophoretic capture of dsDNA in the vestibule of α-HL. Herein, we investigated the use of the latch region to detect a nick in the phosphodiester DNA backbone. The presence of a nick in the phosphodiester backbone of one strand of the duplex results in a significant increase in both the blockade current and noise level relative to the intact duplex. Differentiation between the nicked and intact duplexes based on blockade current or noise, with near baseline resolution, allows real-time monitoring of the rate of T3-DNA ligase-catalyzed phosphodiester bond formation. Under low ionic strength conditions containing divalent cations and a molecular crowding agent (75 mg mL^-1 PEG), the rate of enzyme-catalyzed reaction in the bulk solution was continuously monitored by electrophoretically capturing reaction substrate or product dsDNA in the α-HL protein channel vestibule. Enzyme kinetic results obtained from the nanopore experiments match those from gel electrophoresis under the same reaction conditions, indicating the α-HL nanopore measurement provides a viable approach for monitoring enzymatic DNA repair activity.

Efficient DNA ligation by selective heating of DNA ligase with a radio frequency alternating magnetic field

We present a simple method for efficient DNA ligation utilizing the heat generation of ferromagnetic particles subjected to an ac magnetic field. We carry out the ligation of DNA fragments with cohesive ends using T4 DNA ligase immobilized on the surface of ferromagnetic particles. When a radio frequency alternating magnetic field is applied, ferromagnetic particles dissipate heat and DNA ligase on the particles is selectively heated up and activated with little influence on the annealing of DNA ends, as a result of which the ligation efficiency increases. We show that the ligation efficiency increases with an increase in the field amplitude.

•

DNA ligation is performed with T4 DNA ligase immobilized on iron particles.

•

Heat generation of iron particles in an ac magnetic field promotes DNA ligation.

•

The ligation efficiency increases with an increase in the magnetic field amplitude.

Why Johnny can't clone: Common pitfalls and not so common solutions

The demand for cloned genes has increased incessantly over the past 32 years, but some who need recombinant plasmids struggle to produce them. While the pitfalls of traditional ligation-dependent cloning are non-trivial, most can be avoided with sufficient effort and attention to detail. Here, the chemical properties of enzymes and reagents used to clone genes into plasmids are reviewed to draw attention to the most pertinent details. In particular, the virtues of agarose gel electrophoresis monitoring, the nature of the interactions between DNA and silica, and challenges associated with thermostable DNA polymerases, restriction endonucleases, and T4 DNA ligase are explored. Common pitfalls associated with Escherichia coli transformation and DNA modifying enzymes are also described. A thorough understanding of established methods is essential for troubleshooting, implementing alternative approaches, and inventing new techniques in response to changes in technology and demand.

Impact of HIV-1 infection pathways on susceptibility to antiviral drugs and on virus spread

The infection routes of HIV-1 can affect several viral properties, including dissemination, pathogenesis, and immune evasion. In this study, we evaluated the inhibitory activity of a wide variety of anti-HIV drugs, focusing on the impact that different infection pathways have on their efficacy. Compared to cell-free infection, inhibitory activities were reduced in cell-to-cell productive transmission for all drugs tested. We detected weak reporter-expressing target cells after cell-to-cell transmission in the presence of integrase strand transfer inhibitors (INSTIs). Further analysis revealed that this expression was mainly due to unintegrated circular HIV (cHIV) DNAs, consisting of 1-LTR and 2-LTR circles. When in vitro-constructed cHIV DNAs were introduced into cells, the production of infectious and intercellular transmittable virions was observed, suggesting that cHIV DNA could be a source of infectious virus. These results highlight some advantages of the cell-to-cell infection mode for viral expansion, particularly in the presence of anti-retroviral drugs.

Human DNA ligase III bridges two DNA ends to promote specific intermolecular DNA end joining

Mammalian DNA ligase III (LigIII) functions in both nuclear and mitochondrial DNA metabolism. In the nucleus, LigIII has functional redundancy with DNA ligase I whereas LigIII is the only mitochondrial DNA ligase and is essential for the survival of cells dependent upon oxidative respiration. The unique LigIII zinc finger (ZnF) domain is not required for catalytic activity but senses DNA strand breaks and stimulates intermolecular ligation of two DNAs by an unknown mechanism. Consistent with this activity, LigIII acts in an alternative pathway of DNA double strand break repair that buttresses canonical non-homologous end joining (NHEJ) and is manifest in NHEJ-defective cancer cells, but how LigIII acts in joining intermolecular DNA ends versus nick ligation is unclear. To investigate how LigIII efficiently joins two DNAs, we developed a real-time, fluorescence-based assay of DNA bridging suitable for high-throughput screening. On a nicked duplex DNA substrate, the results reveal binding competition between the ZnF and the oligonucleotide/oligosaccharide-binding domain, one of three domains constituting the LigIII catalytic core. In contrast, these domains collaborate and are essential for formation of a DNA-bridging intermediate by adenylated LigIII that positions a pair of blunt-ended duplex DNAs for efficient and specific intermolecular ligation.

Method of preparing an equimolar DNA mixture for one-step DNA assembly of over 50 fragments

In the era of synthetic biology, techniques for rapidly constructing a designer long DNA from short DNA fragments are desired. To realize this, we attempted to establish a method for one-step DNA assembly of unprecedentedly large numbers of fragments. The basic technology is the Ordered Gene Assembly in Bacillus subtilis (OGAB) method, which uses the plasmid transformation system of B. subtilis. Since this method doesn’t require circular ligation products but needs tandem repeat ligation products, the degree of deviation in the molar concentration of the material DNAs is the only determinant that affects the efficiency of DNA assembly. The strict standardization of the size of plasmids that clone the DNA block and the measurement of the block in the state of intact plasmid improve the reliability of this step, with the coefficient of variation of the molar concentrations becoming 7%. By coupling this method with the OGAB method, one-step assembly of more than 50 DNA fragments becomes feasible.

Constraining protein sequence space: four amino acid alphabets are sufficient to recapitulate lambda repressor multimerization

Nucleic acid polymers selected from random sequence space constitute an enormous array of catalytic, diagnostic and therapeutic molecules. Despite the fact that proteins are robust polymers with far greater chemical and physical diversity, success in unlocking protein sequence space remains elusive. We have devised a combinatorial strategy for accessing nucleic acid sequence space corresponding to proteins comprising selected amino acid alphabets. Using the SynthOMIC approach (synthesis of ORFs by multimerizing in-frame codons), representative libraries comprising four amino acid alphabets were fused in-frame to the lambda repressor DNA-binding domain to provide an in vivo selection for self-interacting proteins that re-constitute lambda repressor function. The frequency of self-interactors as a function of amino acid composition ranged over five orders of magnitude, from approximately 6% of clones in a library comprising the amino acid residues LARE to approximately 0.6 in 10(6) in the MASH library. Sequence motifs were evident by inspection in many cases, and individual clones from each library presented substantial sequence identity with translated proteins by BLAST analysis. We posit that the SynthOMIC approach represents a powerful strategy for creating combinatorial libraries of open reading frames that distils protein sequence space on the basis of three inherent properties: it supports the use of selected amino acid alphabets, eliminates redundant sequences and locally constrains amino acids.

A new 10-min ligation method using a modified buffer system with a very low amount of T4 DNA ligase: the “Coffee Break Ligation” technique

The ligation reaction is widely used in molecular biology. There are several kits available that complete the ligation reaction very rapidly but they are rather expensive. In this study, we successfully modified the ligation buffer with much lower cost than existing kits. The ligation reaction can be completed in 10 min using very low activities such as 0.01 U T4 DNA ligase, and costs only $1 for 100 reactions of 20 microl scale. We name this ligation system the "Coffee Break Ligation" system; one can complete ligation reaction while drinking a cup of coffee, and perform 100 reactions by spending money equivalent to a cup of coffee.

Assays for transcriptional mutagenesis in active genes

Cells exposed to DNA-damaging agents in their natural environment do not undergo continuous cycles of replication but are more frequently engaged in gene transcription. Despite the relatively high efficiency of the different DNA repair pathways, some lesions remain in DNA. During transcription, RNA polymerase can bypass DNA damage on the transcribed strand of an active gene. This bypass can be at the origin of the production of "mutated" mRNA because of the transcriptional miscoding (transcriptional mutagenesis) due to the altered pairing specificities of the lesion. In vivo consequences of transcriptional mutagenesis on normal cell physiology have not well been documented because of the lack of a robust system allowing for its study. We describe here a procedure that we developed using a plasmid-based luciferase reporter assay to analyze the transcriptional mutagenesis events induced by different types of DNA lesions. Introduction of the DNA lesion to be studied at a specific site on the plasmid is based on the synthesis of a complementary strand of a circular, single-stranded DNA (ssDNA) from a DNA lesion-containing oligonucleotide. Once obtained, this construct can be transformed into different Escherichia coli strains that can express the luciferase gene under nongrowth conditions. Quantification of luciferase activity and sequencing of luciferase cDNAs allow for the characterization of transcriptional mutagenesis both quantitatively and qualitatively.

Reliable method for generating double-stranded DNA vectors containing site-specific base modifications

Cells of all living organisms are continuously exposed to physical and chemical agents that damage DNA and alter the integrity of their genomes. Despite the relatively high efficiency of the different repair pathways, some lesions remain in DNA when it is replicated or transcribed. Lesion bypass by DNA and RNA polymerases has been the subject of numerous investigations. However, knowledge of the in vivo mechanism of transcription lesion bypass is very limited because no robust methodology is available. Here we describe a protocol based on the synthesis of a complementary strand of a circular, single-stranded DNA molecule, which allows for the production of large amounts of double-stranded DNA containing a lesion at a specific position in a transcribed sequence. Such constructs can subsequently be used for lesion bypass studies in vivo by RNA polymerase and to ascertain how these events can be affected by the genetic background of the cells.

Increasing the efficiency of SAGE adaptor ligation by directed ligation chemistry

The ability of Serial Analysis of Gene Expression (SAGE) to provide a quantitative picture of global gene expression relies not only on the depth and accuracy of sequencing into the SAGE library, but also on the efficiency of each step required to generate the SAGE library from the starting mRNA material. The first critical step is the ligation of adaptors containing a Type IIS recognition sequence to the anchored 3' end cDNA population that permits the release of short sequence tags (SSTs) from defined sites within the 3' end of each transcript. Using an in vitro transcript as a template, we observed that only a small fraction of anchored 3' end cDNA are successfully ligated with added SAGE adaptors under typical reaction conditions currently used in the SAGE protocol. Although the introduction of approximately 500-fold molar excess of adaptor or the inclusion of 15% (w/v) PEG-8000 increased the yield of the adaptor-modified product, complete conversion to the desired adaptor:cDNA hetero-ligation product is not achieved. An alternative method of ligation, termed as directed ligation, is described which exploits a favourable mass-action condition created by the presence of NlaIII during ligation in combination with a novel SAGE adaptor containing a methylated base within the ligation site. Using this strategy, we were able to achieve near complete conversion of the anchored 3' end cDNA into the desired adaptor-modified product. This new protocol therefore greatly increases the probability that a SST will be generated from every transcript, greatly enhancing the fidelity of SAGE. Directed ligation also provides a powerful means to achieve near-complete ligation of any appropriately designed adaptor to its respective target.

Kinetics and thermodynamics of nick sealing by T4 DNA ligase

T4 DNA ligase is an Mg2+-dependent and ATP-dependent enzyme that seals DNA nicks in three steps: it covalently binds AMP, transadenylates the nick phosphate, and catalyses formation of the phosphodiester bond releasing AMP. In this kinetic study, we further detail the reaction mechanism, showing that the overall ligation reaction is a superimposition of two parallel processes: a 'processive' ligation, in which the enzyme transadenylates and seals the nick without dissociating from dsDNA, and a 'nonprocessive' ligation, in which the enzyme takes part in the abortive adenylation cycle (covalent binding of AMP, transadenylation of the nick, and dissociation). At low concentrations of ATP (<10 microM) and when the DNA nick is sealed with mismatching base pairs (e.g. five adjacent), this superimposition resolves into two kinetic phases, a burst ligation (approximately 0.2 min(-1)) and a subsequent slow ligation (approximately 2x10(-3) min(-1)). The relative rate and extent of each phase depend on the concentrations of ATP and Mg2+. The activation energies of self-adenylation (16.2 kcal.mol(-1)), transadenylation of the nick (0.9 kcal.mol(-1)), and nick-sealing (16.3-18.8 kcal.mol(-1)) were determined for several DNA substrates. The low activation energy of transadenylation implies that the transfer of AMP to the terminal DNA phosphate is a spontaneous reaction, and that the T4 DNA ligase-AMP complex is a high-energy intermediate. To summarize current findings in the DNA ligation field, we delineate a kinetic mechanism of T4 DNA ligase catalysis.

One step assembly of multiple DNA fragments with a designed order and orientation in Bacillus subtilis plasmid

A universal method to reconstitute sets of genes was developed. Owing to the intrinsic nature of the plasmid establishment mechanism in Bacillus subtilis, the assembly of five antibiotic resistance genes with a defined order and orientation was achieved. These five fragments and the plasmid have three-base protruding sequences at both ends. The protruding sequences are designed so that each fragment is ligated once in a row according to the pairing. Ligation by T4 DNA ligase in the presence of 150 mM NaCl and 10% polyethylene glycol at 37 degrees C yielded high molecular tandem repeat linear form DNA. This multimeric form of DNA was preferentially used for plasmid establishment in B.subtilis. The method, referred to as Ordered Gene Assembly in B.subtilis (OGAB), allows for the design of multiple fragments with very high efficiency and great fidelity.

Fidelity of enzymatic ligation for DNA computing

We describe a convenient assay for rapid qualitative evaluation of hybridization/ligation fidelity. The approach uses randomized probe strands of DNA and restriction enzyme digestion after amplification of reaction products by the polymerase chain reaction (PCR). We report ligation efficiencies and fidelities of two DNA ligases, T4 DNA ligase and Thermus aquaticus (Taq) DNA ligase, over a range of temperatures.

Sequence-specific ligation of DNA using RecA protein

A method is described that allows the sequence-specific ligation of DNA. The method is based on the ability of RecA protein from Escherichia coli to selectively pair oligonucleotides to their homologous sequences at the ends of fragments of duplex DNA. These three-stranded complexes were protected from the action of DNA polymerase. When treated with DNA polymerase, unprotected duplex fragments were converted to fragments with blunt ends, whereas protected fragments retained their cohesive ends. By using conditions that greatly favored ligation of cohesive ends, a second DNA fragment could be selectively ligated to a previously protected fragment of DNA. When this second DNA was a vector, selected fragments were preferentially cloned. The method had sufficient power to be used for the isolation of single-copy genes directly from yeast or human genomic DNA, and potentially could allow the isolation of much longer fragments with greater fidelity than obtainable by using PCR.

Enhanced DNA sequencing by hybridization

An enhanced version of DNA sequencing by hybridization (SBH), termed positional SBH (PSBH), has been developed. PSBH uses duplex probes containing single-stranded 3' overhangs, instead of simple single-stranded probes. Stacking interactions between the duplex probe and a single-stranded target should provide enhanced stringency in distinguishing perfectly matched 3' sequences. A second enhancement is the use of enzyme-catalyzed steps, instead of pure physical hybridization. The feasibility of this scheme has been investigated using biotinylated duplex probes containing single-stranded 5-base 3' overhangs, immobilized on streptavidin-coated magnetic beads. Ligation of a single-stranded target, hybridized to the single-stranded region of the duplex probes, provided enhanced discrimination of perfectly matched targets from those containing mismatches. In distinction to the serious complications caused by base composition effects in ordinary SBH, there was little effect of base composition in PSBH. The hardest mismatch to discriminate was the one furthest from the phosphodiester bond formed by ligation. However, mismatches in this position were efficiently discriminated by 3' extension of the duplex probe using a template-dependent DNA polymerase. These results demonstrate that PSBH offers considerable promise to facilitate actual implementations of SBH.

Effects of temperature on excluded volume-promoted cyclization and concatemerization of cohesive-ended DNA longer than 0.04 Mb

The 0.048502 megabase (Mb), primarily double-stranded DNA of bacteriophage lambda has single-stranded, complementary termini (cohesive ends) that undergo either spontaneous intramolecular joining to form open circular DNA or spontaneous intermolecular joining to form linear, end-to-end oligomeric DNAs (concatemers); concatemers also cyclize. In the present study, the effects of polyethylene glycol (PEG) on the cyclization and concatemerization of lambda DNA are determined at temperatures that, in the absence of PEG, favor dissociation of cohesive ends. Circular and linear lambda DNA, monomeric and concatemeric, are observed by use of pulsed field agarose gel (PFG) electrophoresis. During preparation of lambda DNA for these studies, hydrodynamic shear-induced, partial dissociation of joined cohesive ends is fortuitously observed. Although joined lambda cohesive ends progressively dissociate as their temperature is raised in the buffer used here (0.1 M NaCl, 0.01 M sodium phosphate, pH 7.4, 0.001 M EDTA), when PEG is added to this buffer, raising the temperature sometimes promotes joining of cohesive ends. Conditions for promotion of primarily either cyclization or concatemerization are described. Open circular DNAs as long as a 7-mer are produced and resolved. The concentration of PEG required to promote joining of cohesive ends decreases as the molecular weight of the PEG increases. The rate of cyclization is brought, the first time, to values that are high enough to be comparable to the rate observed in vivo. For double-stranded DNA bacteriophages that have a linear replicative form of DNA (bacteriophage T7, for example), a suppression, sometimes observed here, of cyclization mimics a suppression of cyclization previously observed in vivo. The PEG, temperature effects on DNA joining are explained by both the excluded volume of PEG random coils and an increase in this excluded volume that occurs when temperature increases.

Ligation with T4 RNA ligase of an oligodeoxyribonucleotide to covalently-linked cross-sectional base-pair analogues of short, normal, and long dimensions

Compounds that are covalent analogues of nucleic acid base pairs of normal, long, and short C1' to C1' dimensions [B. Devadas and N.J. Leonard (1990) J. Am. Chem. Soc., 112, 3125-3135.] have been added to the oligodeoxyribonucleotide d(A)6 with bacteriophage T4 RNA ligase as a prelude to placing them at defined loci within nucleic acid duplexes. Analogue cross sections that represent a normal Watson-Crick base pair as well as a pyrimidine-pyrimidine and a purine-purine apposition were ligated in modest yields (approximately 20%) to the oligonucleotide. Ligation conditions were optimized for each analogue, and the cross section was joined to only a single oligonucleotide in each case. The structures of the ligated products were proved by HPLC, enzymatic degradation, and spectroscopic analyses.

Specificity of the nick-closing activity of bacteriophage T4 DNA ligase

Bacteriophage T4 DNA ligase effectively joins two adjacent, short synthetic oligodeoxyribonucleotides (oligos), as guided by complementary oligo, plasmid and genomic DNA templates. When a single bp mismatch exists at either side of the ligation junction, the efficiency of the enzyme to ligate the two oligos decreases. Mismatch ligation is approximately five-fold greater if the mismatch occurs at the 3' side rather than at the 5' side of the junction. During mismatch ligation the 5' adenylate of the 3' oligo accumulates in the reaction. The level of the adenylate formation correlates closely with the level of the mismatch ligation. Both mismatch ligation and adenylate formation are suppressed at elevated temperatures and in the presence of 200 mM NaCl or 2-5 mM spermidine. The apparent Km for the oligo template in the absence of salt is 0.05 microM, whereas the Km increases to 0.2 microM in the presence of 200 mM of NaCl. In this report, we demonstrate these properties of T4 DNA ligase for oligo pairs complementary to the beta-globin gene at the sequence surrounding the single bp mutation responsible for sickle-cell anemia. Because of the highly specific nature of the nick-closing reaction, ligation of short oligos with DNA ligase can be used to distinguish two DNA templates differing by a single nucleotide.

Effect of histone H1, poly(ethyleneglycol) and DNA concentration on intermolecular and intramolecular ligation by T4 DNA ligase

The efficiency of ligation of linear DNA and the relative amounts of intramolecular versus intermolecular ligation may be triggered by a number of additive agents. The results show that it is possible to mimic the effect of poly(ethyleneglycol) 6000 by simply increasing DNA concentration about 15-fold: both the rate and the extent of the reaction are greatly enhanced, and intermolecular ligation is largely favored. However, in this case the stimulation by salts, which occurs in poly(ethyleneglycol) solutions, is not observed; we suggest that salts enhance the hydrophobic interactions between ligase and DNA that take place in the presence of poly(ethyleneglycol). We also show that histone H1, which is involved in the formation of chromatin fibers, is able to stimulate intermolecular ligation by T4 ligase. This effect is more specific than a simple neutralisation of the phosphate groups of the DNA by positive charges of the histone; it still occurs at 125 mM NaCl and in the presence of the four core histones. The implications of the finding concerning the mode of action of histone H1 on DNA are discussed.

Charons 36 to 40: multi enzyme, high capacity, recombination deficient replacement vectors with polylinkers and polystuffers

New phage lambda based cloning vectors, Charons 36-40, have been constructed which allow cloning of large (up to 24 kb) DNA fragments with up to sixteen cloning enzymes. Several of these could not be used previously with lambda vectors. Clones produced with these vectors can be propagated under recombination deficient conditions. A novel polystuffer method has been developed that permits vector arms to be purified by simple precipitation and which allows reliable identification of clones that have reincorporated any part of the stuffer. Three of the vectors are available with amber mutations in essential genes.

Two distinct DNA ligases from Drosophila melanogaster embryos

Embryos of Drosophila melanogaster contain two distinct DNA ligases (DNA ligase I and II). DNA ligase I was eluted at 0.2 M KCl and DNA ligase II at 0.6 M KCl on phosphocellulose column chromatography. The former was rich in early developing embryos and its activity decreased during embryonic development. The latter was found constantly throughout the developing stages of embryos. DNA ligase I existed in a cytoplasmic fraction and DNA ligase II is concentrated in nuclei. Both enzymes ligate 5'-phosphoryl and 3'-hydroxyl groups in oligo(dT) in the presence of poly(dA). DNA ligase II is also able to join oligo(dT)(poly(rA). Both enzymes require ATP and Mg2+ for activity. The Km for ATP is 2.7 X 10(-6) M for DNA ligase I, and 3.0 X 10(-5) M for DNA ligase II. DNA ligase I requires dithiothreitol and polyvinyl alcohol, but DNA ligase II does not. Both enzymes are inhibited in the presence of N-ethylmaleimide. DNA ligase I is active at a low salt concentration (0-30 mM KCl), but DNA ligase II is active at high salt concentrations (50-100 mM). DNA ligase I is more labile than DNA ligase II. The molecular masses of DNA ligase-AMP adducts were determined as 86 and 75 kDa for DNA ligase I, and as 70 (major protein) and 90 kDa (minor protein) for DNA ligase II under denaturing conditions. A sedimentation coefficient of 4.2 S was observed for DNA ligase II. Consequently, Drosophila DNA ligase I and II are quite similar to mammalian DNA ligase I and II. Drosophila DNA ligase I and a DNA ligase by B.A. Rabin et al. [(1986) J. Biol. Chem. 261, 10637-10645] seem to be the same enzyme.

Regulation of inter- and intramolecular ligation with T4 DNA ligase in the presence of polyethylene glycol

Polyethylene glycol (PEG) stimulates ligation with T4 DNA ligase. In 10% (w/v) PEG 6,000 solutions, only intermolecular ligation is enhanced by monovalent cations, while both inter- and intramolecular ligation occur without their presence. Similar stimulation was also caused by divalent cations or polyamines in the PEG 6,000 solutions. Such properties of the ligase could be applied to control the extent of inter- and intramolecular ligation. Ligation with cations or polyamines in 10% PEG 6,000 solutions was effective for intermolecular ligation. Ligation without cations or polyamines in 6.0% to 10% PEG 6,000 solutions was effective for intramolecular ligation.

Ligation of single-stranded oligodeoxyribonucleotides by T4 RNA ligase

Despite its unique ability to ligate single-stranded DNA molecules, T4 RNA ligase has so far seen little use in molecular biology due to long reaction times, modest yields, and apparent inability to promote ligation of long oligodeoxyribonucleotides. We describe here a set of reaction conditions which dramatically shorten the reaction time and give reproducible 40 to 60% ligation of DNA fragments of up to 40 bases in length. These improvements open promising new fields of application to T4 RNA ligase.

Stimulation of intermolecular ligation with E. coli DNA ligase by high concentrations of monovalent cations in polyethylene glycol solutions

In the presence of high concentrations of the nonspecific polymer polyethylene glycol (PEG), intermolecular cohesive-end ligation with the DNA ligase from Escherichia coli was stimulated by high salt concentrations: 200 mM NaCl or 300 mM KCl in 10% (w/v) PEG 6000 solutions, and 100-200 mM NaCl or 150-300 mM KCl in 15% PEG 6000 solutions. Intermolecular blunt-end ligation with this ligase was also stimulated at 100-150 mM NaCl or 150-250 mM KCl in 15% PEG 6000 solutions. The extent of such intermolecular ligation increased and the salt concentrations at which ligation was stimulated extended to lower concentrations when we raised the temperature from 10 to 37 degrees C.