Energy-structure correlations of plasmid DNA in different topological forms

Soil minerals and organic matters affect ARGs transformation by changing the morphology of plasmid and bacterial responses

Soil environment is a vital place for the occurrence and spread of antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs). Extracellular DNA-mediated transformation is an important pathway for ARGs horizontal transfer and widely exists in soil environment. However, little information is available on how common soil components affect ARGs transformation. Here, three minerals (quartz, kaolinite, and montmorillonite) and three organic matters (humic acid, biochar, and soot) were selected as typical soil components. A small amount in suspension (0.2 g/L) of most soil components (except for quartz and montmorillonite) promoted transformant production by 1.1-1.6 folds. For a high amount (8 g/L), biochar significantly promoted transformant production to 1.5 times, kaolinite exerted a 30 % inhibitory effect. From the perspective of plasmid, biochar induced a higher proportion of supercoiled plasmid than kaolinite; more dissolved organic matter and metal ions facilitated plasmid aggregation under the near-neutral pH, thus promoted transformation. As for the influence of materials on recipient, although biochar and kaolinite both increased reactive oxygen species (ROS) level and membrane permeability, biochar up-regulated more ROS related genes, resulting in intracellular ROS production and up-regulating the expression of carbohydrate metabolism and transformation related genes. While kaolinite inhibited transformation mainly by causing nutrient deficiency.

Organic metal complexes based on zoledronate–calcium: a potential pDNA delivery system

Organic metal complexes as a type of hybrid materials have been used for gene delivery.

Efficient deformation algorithm for plasmid DNA simulations

BACKGROUND

Plasmid DNA molecules are closed circular molecules that are widely used in life sciences, particularly in gene therapy research. Monte Carlo methods have been used for several years to simulate the conformational behavior of DNA molecules. In each iteration these simulation methods randomly generate a new trial conformation, which is either accepted or rejected according to a criterion based on energy calculations and stochastic rules. These simulation trials are generated using a method based on crankshaft motion that, apart from some slight improvements, has remained the same for many years.

RESULTS

In this paper, we present a new algorithm for the deformation of plasmid DNA molecules for Monte Carlo simulations. The move underlying our algorithm preserves the size and connectivity of straight-line segments of the plasmid DNA skeleton. We also present the results of three experiments comparing our deformation move with the standard and biased crankshaft moves in terms of acceptance ratio of the trials, energy and temperature evolution, and average displacement of the molecule. Our algorithm can also be used as a generic geometric algorithm for the deformation of regular polygons or polylines that preserves the connections and lengths of their segments.

CONCLUSION

Compared with both crankshaft moves, our move generates simulation trials with higher acceptance ratios and smoother deformations, making it suitable for real-time visualization of plasmid DNA coiling. For that purpose, we have adopted a DNA assembly algorithm that uses nucleotides as building blocks.

Single DNA denaturation and bubble dynamics

While the Watson-Crick double-strand is the thermodynamically stable state of DNA in a wide range of temperature and salt conditions, even at physiological conditions local denaturation bubbles may open up spontaneously due to thermal activation. By raising the ambient temperature, titration, or by external forces in single molecule setups bubbles proliferate until full denaturation of the DNA occurs. Based on the Poland-Scheraga model we investigate both the equilibrium transition of DNA denaturation and the dynamics of the denaturation bubbles with respect to recent single DNA chain experiments for situations below, at, and above the denaturation transition. We also propose a new single molecule setup based on DNA constructs with two bubble zones to measure the bubble coalescence and extract the physical parameters relevant to DNA breathing. Finally we consider the interplay between denaturation bubbles and selectively single-stranded DNA binding proteins.

Spectroscopic methods for the physical characterization and formulation of nonviral gene delivery systems

Currently, with the exception of naked DNA formulations, most pharmaceutical preparations of plasmid DNA employ some type of polycationic delivery vector such as synthetic cationic polymers and lipids to enhance delivery. A number of biophysical techniques are readily available for the structural characterization of plasmid DNA within synthetic gene delivery complexes. Here we present applications of ultraviolet (UV) absorption, circular dichroism (CD), infrared (IR), and fluorescence spectroscopies as well as dynamic light scattering to the structural analysis of the oligonucleotide component of nonviral gene delivery vectors. We also illustrate this approach for the investigation of the formulation of lipoplex and polyplex-based gene delivery systems. To summarize such data, we show how the macromolecular complexes can be represented as vectors in a highly dimensional space in which the components of the vector consist of normalized values of experimental parameters measured as a function of different solution conditions such as pH and ionic strength.

Dynamic binding capacity of plasmid DNA in histidine–agarose chromatography

The use of histidine-agarose chromatography in the purification of supercoiled (sc) plasmid DNA (pDNA) from Escherichia coli lysates has been reported recently. In the current work we describe a set of breakthrough experiments which were designed to study the effect of parameters such as flow-rate, temperature, concentration and conformation on the dynamic binding capacity of pDNA to the histidine support. One of the most striking results shows that the dynamic binding capacity for sc pDNA decreases linearly from 250.8 to 192.0 microg sc pDNA/mL when the temperature is varied from 5 to 24 degrees C. This behaviour was attributed to temperature-induced, pre-denaturation conformational changes which promote the removal of negative superhelical turns in sc pDNA molecules and decrease the interaction of DNA bases with the histidine ligands. The capacity for sc pDNA was highly improved when using feeds with higher pDNA concentrations, a phenomenon which was attributed to the fact that pDNA molecules in more concentrated solutions are significantly compressed. A maximum capacity of 530.0 microg pDNA/mL gel was obtained when using a 125 microg/mL pDNA feed at 1 mL/min and 5 degrees C, a figure which is comparable to the plasmid capacity values published for other chromatographic supports. Finally, a more than 2-fold increase in capacity was obtained when changing from open circular to sc pDNA solutions. Overall, the results obtained provide valuable information for the future development and implementation of histidine chromatography in the process scale purification of pDNA.

Enhancements in gene expression by the choice of plasmid DNA formulations containing neutral polymeric excipients

Formulations containing maltodextrin (2% w/v) were identified to facilitate intramuscular (im) delivery of plasmid DNA in mice using the reporter genes luciferase and chloramphenicol acetyltransferase (CAT) and the therapeutic gene of erythropoietin (EPO) as monitors of transfection efficiency. Even though considerable variability in gene expression was observed in animals, a 5-8-fold enhancement of reporter gene expression was observed with this excipient compared with saline formulations of DNA. In a therapeutically significant experiment, a single im injection of an EPO plasmid formulation containing 2% (w/v) maltodextrin resulted in a significant and prolonged elevation of the hematocrit levels of mice compared with control DNA in saline. Biophysical studies with Fourier transform infrared (FTIR) spectroscopy, isothermal titration, and differential scanning calorimetry (DSC) suggested a weak interaction between DNA and maltodextrin as well as a thermal stabilizing effect on the DNA. These in vivo and biophysical results with maltodextrin are comparable to those reported previously with other nonionic polymers, such as poly(vinyl pyrrolidone) and poloxamers, and indicate that maltodextrin is an additional nonionic excipient that displays the property of gene expression enhancement.

Differential scanning calorimetric studies of the thermal stability of plasmid DNA complexed with cationic lipids and polymers

The thermal stabilities of supercoiled (SC) and linear/open circular (LIN/OC) forms of plasmid DNA when complexed with cationic lipids or cationic polymers used for cellular transfection were assessed using differential scanning calorimetry. Differences in the stability of SC DNA produced by the cationic lipids DOTAP (1,2-dioleoyltrimethyl ammoniumpropane chloride), DSTAP (1,2-distearyltrimethyl ammoniumpropane chloride), and DDAB (dimethyldioctadecylammonium bromide) upon complexation suggest possible effects of headgroup structure on the stability of SC DNA and minimal effects of lipid acyl chain saturation/unsaturation. Complexation of DNA with the cationic polymers polyethylenimine (PEI) or poly-L-lysine (PLL) (but not poly-L-arginine) resulted in a decreased stability of SC DNA when the DNA was in charge excess, although all polymers stabilized SC DNA when the polymer was in charge excess. The effects of these cationic polymers on the stability of SC DNA can be explained by changes produced in the tertiary structure of SC DNA upon binding and may reflect the importance of the topological constraint of supercoiling upon the stability of the resulting complexes.

The formulation of biopharmaceutical products

Biopharmaceutical products represent a diverse group of products that includes proteins, peptides, nucleic acids, whole cells, viral particles and vaccines. The conformation of the macromolecule or cell must be maintained to retain biological activity, and animal models for biological activity and characterization assays are often developed in tandem with initial formulation studies. This presents the formulation scientist with a unique set of challenges when compared to those for small molecules. This review focuses on approaches to the formulation of macromolecules into biopharmaceutical products, and provides examples of studies that have been undertaken within the authors' laboratories.

Analysis of plasmid DNA from a pharmaceutical perspective

The advent of gene therapy and polynucleotide-based vaccines has resulted in the use of plasmid DNA as a drug substance. Although biologically (cell or animal) based assays must currently be employed to establish the identity and potency of such drugs, we argue that in the future, a combination of microchip-based mutation detection devices combined with an array of chromatographic, electrophoretic, hydrodynamic, and spectroscopic methods can be employed to rigorously establish these properties. We review a variety of such methods in this context and also consider the issue of the chemical stability of plasmids. Extensive comparison is made to protein-based pharmaceuticals with the unique importance of polynucleotide sequence emphasized in comparison to protein tertiary structure.

Differential scanning calorimetric study of the effect of intercalators and other kinds of DNA-binding drugs on the stepwise melting of plasmid DNA

The effect of intercalating drugs (the anthracycline group of antibiotics, ethidium bromide, actinomycin D) on stepwise melting of DNA was studied by differential scanning calorimetry (DSC). The DSC DNA melting profile of plasmid pJL3-TB5 DNA (5277 base-pairs in length) consists of seven peaks, and all the intercalators caused shifting of these peaks, particularly those formed at the high temperature ranges, to the higher temperature ranges in a characteristic manner depending upon the binding strength of the drug. The analysis of the anthracycline group of antibiotics, such as aclacinomycin A, daunomycin, adriamycin and pyrarubicin, indicates that the difference in binding is due to the sugar moiety at position O-7 of the chromophore in these antibiotics. Analysis on the basis of the helix-coil transition theory suggests that the anthracycline group of antibiotics interact preferentially with the 5'-CG-3' sequences. The effect of various DNA-binding drugs other than intercalators on stepwise melting of DNA was then studied by DSC. The representative drugs examined were distamycin A, peplomycin, cis-dichlorodiamine-platinum(II) (cis-DDP or cis-Platin) and mitomycin C, which differ in their mode of interaction with DNA; namely, minor groove binding, strand cleavage and intrastrand or interstrand cross-linking. Distamycin A caused shifting of the DSC peaks at the low temperature ranges to a higher temperature range, whereas peplomycin and cis-DDP caused shifting of all the DSC peaks to form a broad peak at a lower temperature range, suggesting that the DSC DNA melting profiles are affected in a characteristic manner depending upon the interaction mode of the drug.