Non-radioactive automated sequencing of oligonucleotides by chemical degradation

Sequencing Mirror-Image DNA Chemically

The development of mirror-image biology systems faces a crucial barrier of lacking an L-DNA sequencing technique. Here, we developed a practical method for sequencing mirror-image DNA by adopting the Maxam-Gilbert sequencing approach, through which specific nucleobases in an end-labeled L-DNA are cleaved by achiral chemicals. This technique may facilitate the therapeutic application of nuclease-resistant L-aptamer drugs, and bring the vision of building an alternative, mirror-image self-replicating system closer to reality.

Metal ion-catalyzed nucleic acid alkylation and fragmentation

Nucleic acid microarrays are a growing technology in which high densities of known sequences are attached to a substrate in known locations (addressed). Hybridization of complementary sequences leads to a detectable signal such as an electrical impulse or fluorescence. This combination of sequence addressing, hybridization, and detection increases the efficiency of a variety of genomic disciplines including those that profile genetic expression, search for single nucleotide polymorphisms (SNPs), or diagnose infectious diseases by sequencing portions of microbial or viral genomes. Incorporation of reporter molecules into nucleic acids is essential for the sensitive detection of minute amounts of nucleic acids on most types of microarrays. Furthermore, polynucleic acid size reduction increases hybridization because of increased diffusion rates and decreased competing secondary structure of the target nucleic acids. Typically, these reactions would be performed as two separate processes. An improvement to past techniques, termed labeling-during-cleavage (LDC), is presented in which DNA or RNA is alkylated with fluorescent tags and fragmented in the same reaction mixture. In model studies with 26 nucleotide-long RNA and DNA oligomers using ultraviolet/visible and fluorescence spectroscopies as well as high-pressure liquid chromatography and mass spectrometry, addition of both alkylating agents (5-(bromomethyl)fluorescein, 5- or 6-iodoacetamidofluorescein) and select metal ions (of 21 tested) to nucleic acids in aqueous solutions was critical for significant increases in both labeling and fragmentation, with >or=100-fold increases in alkylation possible relative to metal ion-free reactions. Lanthanide series metal ions, Pb(2+), and Zn(2+) were the most reactive ions in terms of catalyzing alkylation and fragmentation. While oligonucleotides were particularly susceptible to fragmentation at sites containing phosphorothioate moieties, labeling and cleavage reactions occurred even without incorporation of phosphorothioate moieties into the RNA and DNA target molecules. In fact, LDC conditions were found in which RNA could be fragmented into its component monomers, allowing simultaneous sequencing from both the 5'- and the 3'-termini by mass spectrometry. The results can be explained by alkylation of the (thio)phosphodiester linkages to form less hydrolytically stable (thio)phosphotriesters, which then decompose into 2',3'-cyclic phosphate (or 2'-phosphate) and 5'-hydroxyl terminal products. Analysis of fragmentation and alkylation products of Mycobacterium tuberculosis (Mtb) ribosomal RNA (rRNA) transcripts by polyacrylamide gel electrophoresis was consistent with the model studies. Building upon these results, I found that products from Mtb rRNA amplification products were processed with fluorescent reporters and metal ions in a single reaction milieu for analysis on an Affymetrix GeneChip. Mild conditions were discovered which balanced the need for aggressive alkylation and the need for controlled fragmentation, advantageously yielding GeneChip results with greater than 98% of the nucleotides reported correctly relative to reference sequences, results sufficient for accurately identifying Mtb from other Mycobacterium species. Thus, LDC is a new, straightforward, and rapid aqueous chemistry that is based on metal ion-catalyzed alkylation and alkylation-catalyzed fragmentation of nucleic acids for analysis on microarrays or other hybridization assays and that, possibly, has utility in similar processing of other appropriately functionalized biomolecules.

Chemical methods of DNA and RNA fluorescent labeling

Several procedures have been described for fluorescent labeling of DNA and RNA. They are based on the introduction of aldehyde groups by partial depurination of DNA or oxidation of the 3'-terminal ribonucleoside in RNA by sodium periodate. Fluorescent labels with an attached hydrazine group are efficiently coupled with the aldehyde groups and the hydrazone bonds are stabilized by reduction with sodium cyanoborohydride. Alternatively, DNA can be quantitatively split at the depurinated sites with ethylenediamine. The aldimine bond between the aldehyde group in depurinated DNA or oxidized RNA and ethylenediamine is stabilized by reduction with sodium cyanoborohydride and the primary amine group introduced at these sites is used for attachment of isothiocyanate or succinimide derivatives of fluorescent dyes. The fluorescent DNA labeling can be carried out either in solution or on a reverse phase column. These procedures provide simple, inexpensive methods of multiple DNA labeling and of introducing one fluorescent dye molecule per RNA, as well as quantitative DNA fragmentation and incorporation of one label per fragment. These methods of fluorophore attachment were shown to be efficient for use in the hybridization of labeled RNA, DNA and DNA fragments with oligonucleotide microchips.

Automated sequencing of fluorescently labelled DNA by chemical degradation

A new general method for sequencing fluorescently labelled DNA by chemical degradation has been developed. It is based on the observation that fluorescein attached via a mercaptopropyl or aminopropyl linker arm to the 5'-phosphate of an oligonucleotide is stable during the reactions commonly used in chemical cleavage procedures. DNA to be degraded is first enzymatically synthesized in vitro by annealing and extending a fluorescently labelled primer thereby introducing the fluorescent label at the 5'-end of the fragment. The newly synthesized fluorescently labelled DNA is then chemically degraded using: (a) a set of four different cleavage reactions; or (b) only one reaction comprising methylation of G-residues followed by a partial cleavage with piperidine in the presence of sodium chloride. The fluorescent degradation products are loaded on either four lanes or one lane of the gel, respectively, and the emitted fluorescence detected online during electrophoresis. In the 'four reactions/four lanes' method 200-350 bp (base pairs) can be read from the labelled end. The 'one reaction/one lane' method, in which the nucleotide sequence is determined by measuring different signal intensities following the rule G greater than A greater than C greater than T, currently yields around 100-200 bp of sequence per sample.

Single-molecule fluorescence detection: autocorrelation criterion and experimental realization with phycoerythrin

A theory for single-molecule fluorescence detection is developed and then used to analyze data from subpicomolar solutions of B-phycoerythrin (PE). The distribution of detected counts is the convolution of a Poissonian continuous background with bursts arising from the passage of individual fluorophores through the focused laser beam. The autocorrelation function reveals single-molecule events and provides a criterion for optimizing experimental parameters. The transit time of fluorescent molecules through the 120-fl imaged volume was 800 microseconds. The optimal laser power (32 mW at 514.5 nm) gave an incident intensity of 1.8 x 10(23) photons.cm-2.s-1, corresponding to a mean time of 1.1 ns between absorptions. The mean incremental count rate was 1.5 per 100 microseconds for PE monomers and 3.0 for PE dimers above a background count rate of 1.0. The distribution of counts and the autocorrelation function for 200 fM monomer and 100 fM dimer demonstrate that single-molecule detection was achieved. At this concentration, the mean occupancy was 0.014 monomer molecules in the probed volume. A hard-wired version of this detection system was used to measure the concentration of PE down to 1 fM. This single-molecule counter is 3 orders of magnitude more sensitive than conventional fluorescence detection systems.

Direct genomic fluorescent on-line sequencing and analysis using in vitro amplification of DNA

In vitro amplification of genomic DNA and total RNA, as well as recombinant DNA, using one fluorescently labelled and one unlabelled primer during amplification, together with on-line analysis of the products on the EMBL fluorescent DNA sequencer, is described. Further is reported direct sequencing of fluorescently labelled amplified probes by solid-phase chemical degradation, without subcloning and purification steps involved. At present up to 350 bases in 4 hours are determined with this technique. The fluorescent dye and its bond to the oligonucleotide are stable during the amplification cycles, and do not interfere with the enzymatic polymerization. High sensitivity of the detection device, down to 10(-18) moles, corresponding to less than 10(6) molecules makes possible analyses of the non-radioactive amplified probes after only 10 amplification cycles, starting with about 5 x 10(4) copies of recombinant DNA.

Non-radioactive chemical sequencing of biotin labelled DNA

Methods for the nonradioactive chemical sequencing of DNA are described. A biotin marker molecule, attached chemically to an oligonucleotide primer or enzymatically in an endfilling reaction of restriction enzyme sites, is stable during the base-specific chemical modification and strand scission reactions. Following fragment separation by direct blotting electrophoresis, the membrane bound sequence pattern can be visualized by a streptavidin-bridged enzymatic color reaction. The biotin labeling is also applicable for DNA sequencing by random degradation of phosphothioates, thus showing to be a universal label for nonradioactive DNA sequencing.

Automated Sanger DNA sequencing with one label in less than four lanes on gel

Novel Sanger dideoxy sequencing with only one fluorescent dye label for the four bases of one clone and sequence determination in two lanes on polyacrylamide gel is presented, loading A greater than G in one lane and T greater than C in the other. Sequencing reactions for the two bases in each lane are carried out in one tube. At present the ratio of ddATP:ddGTP and ddTTP:ddCPT is set to 5:1 in the two tubes. Distinction between the two bases in one lane is done by comparing the different magnitudes of the peaks. This method increases the capacity since more clones may be run simultaneously on one gel, while keeping the reliability and simplicity that comes with the use of only one fluorescent dye for the four bases of one clone. At present about 200 bases are determined with the one-dye two-lane method on the EMBL's automated fluorescent DNA sequencer, using T7 DNA polymerase. The error rate in the deduced sequence is about 1%. The technique is used for the determination of overlaps in mapping projects. In principle, it is possible to determine the sequence with one dye in only one lane on the gel by choosing the proper ddNTP ratios for all four bases, carrying out reactions in one tube and applying the product in one lane, but the error rate for this one-lane method seems too high at present and further improvements in the uniformity of peaks obtainable with the T7 DNA polymerase or other enzymes are required.