In vitro self-splicing reactions of the chloroplast group I intron Cr.LSU from Chlamydomonas reinhardtii and in vivo manipulation via gene-replacement

Mapping of the css (chloroplast splicing suppressor) gene(s) to a recombinationally suppressed region of chromosome III in Chlamydomonas reinhardtii

In previous work, three suppressors of defective group I introns (7151, 71N1, 7120) were isolated from a mutant of Chlamydomonas reinhardtii that had a splicing-deficient chloroplast large subunit (LSU) rRNA intron. Genetic analysis indicated that the 7151 and 71N1 suppressor mutations each involved single nuclear loci, and that the 7151 mutation was dominant. Here we present genetic evidence that the 7120 suppressor also involves a single nuclear locus and that the mutation is dominant in vegetative diploids. Moreover, we have employed crosses with the S1D2 strain and molecular markers to map the 7120 and 71N1 suppressors. Based on an analysis of 800 progeny from 7120 × S1D2, the 7120 suppressor is located in a region of ~400 kb on chromosome III that is devoid of recombination. The ~400-kb region contains at least 72 genes, about one-third of which (i.e., 22) are predicted to be organelle targeted. Similar analysis of 71N1 × S1D2 using 400 progeny also pointed to the recombination-deficient region of chromosome III, raising the possibility that these mutations could affect the same gene. These efforts lay the foundation for identifying the css (chloroplast splicing suppressor) gene(s), which promotes splicing of multiple chloroplast group I introns.

Computational prediction of efficient splice sites for trans-splicing ribozymes

Group I introns have been engineered into trans-splicing ribozymes capable of replacing the 3'-terminal portion of an external mRNA with their own 3'-exon. Although this design makes trans-splicing ribozymes potentially useful for therapeutic application, their trans-splicing efficiency is usually too low for medical use. One factor that strongly influences trans-splicing efficiency is the position of the target splice site on the mRNA substrate. Viable splice sites are currently determined using a biochemical trans-tagging assay. Here, we propose a rapid and inexpensive alternative approach to identify efficient splice sites. This approach involves the computation of the binding free energies between ribozyme and mRNA substrate. We found that the computed binding free energies correlate well with the trans-splicing efficiency experimentally determined at 18 different splice sites on the mRNA of chloramphenicol acetyl transferase. In contrast, our results from the trans-tagging assay correlate less well with measured trans-splicing efficiency. The computed free energy components suggest that splice site efficiency depends on the following secondary structure rearrangements: hybridization of the ribozyme's internal guide sequence (IGS) with mRNA substrate (most important), unfolding of substrate proximal to the splice site, and release of the IGS from the 3'-exon (least important). The proposed computational approach can also be extended to fulfill additional design requirements of efficient trans-splicing ribozymes, such as the optimization of 3'-exon and extended guide sequences.

Chlamydomonas chloroplasts can use short dispersed repeats and multiple pathways to repair a double-strand break in the genome

Certain group I introns insert into intronless DNA via an endonuclease that creates a double-strand break (DSB). There are two models for intron homing in phage: synthesis-dependent strand annealing (SDSA) and double-strand break repair (DSBR). The Cr.psbA4 intron homes efficiently from a plasmid into the chloroplast psbA gene in Chlamydomonas, but little is known about the mechanism. Analysis of co-transformants selected using a spectinomycin-resistant 16S gene (16S(spec)) provided evidence for both pathways. We also examined the consequences of the donor DNA having only one-sided or no homology with the psbA gene. When there was no homology with the donor DNA, deletions of up to 5 kb involving direct repeats that flank the psbA gene were obtained. Remarkably, repeats as short as 15 bp were used for this repair, which is consistent with the single-strand annealing (SSA) pathway. When the donor had one-sided homology, the DSB in most co-transformants was repaired using two DNAs, the donor and the 16S(spec) plasmid, which, coincidentally, contained a region that is repeated upstream of psbA. DSB repair using two separate DNAs provides further evidence for the SDSA pathway. These data show that the chloroplast can repair a DSB using short dispersed repeats located proximally, distally, or even on separate molecules relative to the DSB. They also provide a rationale for the extensive repertoire of repeated sequences in this genome.

Unusual metal specificity and structure of the group I ribozyme from Chlamydomonas reinhardtii 23S rRNA

Group I intron ribozymes require cations for folding and catalysis, and the current literature indicates that a number of cations can promote folding, but only Mg2+ and Mn2+ support both processes. However, some group I introns are active only with Mg2+, e.g. three of the five group I introns in Chlamydomonas reinhardtii. We have investigated one of these ribozymes, an intron from the 23S LSU rRNA gene of Chlamydomonas reinhardtii (Cr.LSU), by determining if the inhibition by Mn2+ involves catalysis, folding, or both. Kinetic analysis of guanosine-dependent cleavage by a Cr.LSU ribozyme, 23S.5 Delta Gb, that lacks the 3' exon and intron-terminal G shows that Mn2+ does not affect guanosine binding or catalysis, but instead promotes misfolding of the ribozyme. Surprisingly, ribozyme misfolding induced by Mn2+ is highly cooperative, with a Hill coefficient larger than that of native folding induced by Mg2+. At lower Mn2+ concentrations, metal inhibition is largely alleviated by the guanosine cosubstrate (GMP). The concentration dependence of guanosine cosubstrate-induced folding suggests that it functions by interacting with the G binding site, perhaps by displacing an inhibitory Mn2+. Because of these and other properties of Cr.LSU, the tertiary structure of the intron from 23S.5 Delta Gb was examined using Fe2+-EDTA cleavage. The ground-state structure shows evidence of an unusually open ribozyme core: the catalytic P3-P7 domain and the nucleotides that connect it to the P4-P5-P6 domain are exposed to solvent. The implications of this structure for the in vitro and in vivo properties of this intron ribozyme are discussed.

Mg2+ mimicry in the promotion of group I ribozyme activities by aminoglycoside antibiotics

Aminoglycoside antibiotics inhibit several types of ribozymes, including group I introns, by displacing critical Mg2+ ions. However, they stimulate activity of the small hairpin ribozyme. We show here that aminoglycosides promote self-splicing of the Cr.psbA2 group I intron at subthreshold Mg2+ concentrations. Neomycin is the most effective of the aminoglycosides tested; it stimulates splicing of Cr.psbA2 at micromolar concentrations, and, in this respect, is >100-fold more effective than spermidine. At optimal Mg2+ for Cr.psbA2 splicing, these drugs, especially kanamycin B and tobramycin, promote GTP attack at the 3' splice-site. Kinetic analysis suggests that this is due to an alternatively folded state of the ribozyme that is induced, or stabilized, by aminoglycosides. A similar effect is observed at high Mg2+ concentrations. Comparing the effects of structurally related aminoglycosides indicates that splicing promotion is more sensitive to drug structure than misfolding and occurs at lower drug concentrations. These data show that aminoglycosides can promote biochemical activities of a large ribozyme by acting as a Mg2+ mimic. The results also underscore the functional diversity of group I introns in nature.

Chloroplast RNA processing and stability

Primary chloroplast transcripts are processed in a number of ways, including intron splicing, internal cleavage of polycistronic RNAs, and endonucleolytic or exonucleolytic cleavages at the transcript termini. All chloroplast RNAs are also subject to degradation, although a curious feature of many chloroplast mRNAs is their relative longevity. Some of these processes, e.g., psbA splicing and stability of a number of chloroplast mRNAs, are regulated in response to light-dark cycles or nutrient availability. This review highlights recent advances in our understanding of these processes in the model organism Chlamydomonas reinhardtii, focusing on results since the extensive reviews published in 1998 [Herrin DL et al. 1998 (pp. 183-195), Nickelsen Y 1998 (pp. 151-163), Stern DB and Drager RG 1998 (pp. 164-182), in Rochaix JD et al. (eds) The Molecular Biology of Chloroplasts and Mitochondria in Chlamydomonas. Kluwer Academic Publishers, Dordrecht, The Netherlands]. We also allude to studies with other organisms, and to the potential impact of the Chlamydomonas genome project where appropriate.

The ability to form full-length intron RNA circles is a general property of nuclear group I introns

In addition to splicing, group I intron RNA is capable of an alternative two-step processing pathway that results in the formation of full-length intron circular RNA. The circularization pathway is initiated by hydrolytic cleavage at the 3' splice site and followed by a transesterification reaction in which the intron terminal guanosine attacks the 5' splice site presented in a structure analogous to that of the first step of splicing. The products of the reactions are full-length circular intron and unligated exons. For this reason, the circularization reaction is to the benefit of the intron at the expense of the host. The circularization pathway has distinct structural requirements that differ from those of splicing and appears to be specifically suppressed in vivo. The ability to form full-length circles is found in all types of nuclear group I introns, including those from the Tetrahymena ribosomal DNA. The biological function of the full-length circles is not known, but the fact that the circles contain the entire genetic information of the intron suggests a role in intron mobility.

Mutagenesis of a light-regulated psbA intron reveals the importance of efficient splicing for photosynthetic growth

The chloroplast-encoded psbA gene encodes the D1 polypeptide of the photosystem II reaction center, which is synthesized at high rates in the light. In Chlamydomonas reinhardtii, the psbA gene contains four self-splicing group I introns whose rates of splicing in vivo are increased at least 6-10-fold by light. However, because psbA is an abundant mRNA, and some chloroplast mRNAs appear to be in great excess of what is needed to sustain translation rates, the developmental significance of light-promoted splicing has not been clear. To address this and other questions, potentially destabilizing substitutions were made in several predicted helices of the fourth psbA intron, Cr.psbA4, and their effects on in vitro and in vivo splicing assessed. Two-nucleotide substitutions in P4 and P7 were necessary to substantially reduce splicing of this intron in vivo, although most mutations reduced self-splicing in vitro. The P7-4,5 mutant, whose splicing was completely blocked, showed no photoautotrophic growth and synthesis of a truncated D1 (exons 1-4) polypeptide from the unspliced mRNA. Most informative was the P4'-3,4 mutant, which exhibited a 45% reduction in spliced psbA mRNA, a 28% reduction in synthesis of full-length D1, and an 18% reduction in photoautotrophic growth. These results indicate that psbA mRNA is not in great excess, and that highly efficient splicing of psbA introns, which is afforded by light conditions, is necessary for optimal photosynthetic growth.

Nuclear genes that promote splicing of group I introns in the chloroplast 23S rRNA and psbA genes in Chlamydomonas reinhardtii

Single nucleotide substitutions were made in the core helices P4, P6, and P7, and in the metal-binding GAAA motif in the J4/5 region of the chloroplast group I rRNA intron of Chlamydomonas reinhardtii, Cr.LSU. In vitro assays showed that these substitutions had surprisingly strong effects on Cr.LSU self-splicing; however, splicing of all but the P6 mutations could be at least partially recovered by increasing the Mg2+ concentration. The mutant constructs were transformed into chloroplasts to replace the wild-type intron; however, only the P4 mutants became homoplasmic, indicating that the other mutations were lethal. The splicing-deficient P4125A mutant, which exhibited slow growth and light sensitivity, was used to isolate suppressor strains that showed a substantial restoration of Cr.LSU splicing. Genetic analysis of the 7151, 7120 and 71N1 suppressors indicated that these mutations are in at least two nuclear genes. The 7151 suppressor mutation, which defines the chloroplast-splicing suppressor (css1) gene, had no obviously altered growth phenotype with the wild-type intron, and was dominant in vegetative diploids containing the mutant intron. All three of the suppressor strains also suppressed a mutation in the P4 region of the fourth psbA intron, Cr.psbA4, indicating that these genes play a role in splicing of multiple group I introns in the chloroplast.

Creation of an artificial bifunctional intein by grafting a homing endonuclease into a mini-intein

The majority of inteins are comprised of a protein splicing domain and a homing endonuclease domain. Experimental evidence has demonstrated that the splicing domain and the endonuclease domain in a bifunctional intein are largely independent of each other with respect to both structure and activity. Here, an artificial bifunctional intein has been created through the insertion of an existing homing endonuclease into a mini-intein that is naturally lacking this functionality. The gene for I-CreI, an intron-encoded homing endonuclease, was grafted into the monofunctional Mycobacterium xenopi GyrA intein at the putative site of the missing endonuclease. The resulting fusion protein was found to be capable of protein splicing similar to that of the parent intein. In addition, the protein demonstrated site-specific endonuclease activity that is characteristic of the I-CreI homing endonuclease. The function of each domain therefore remained unaffected by the presence of the other domain. This artificial fusion of the two domains is a potential novel mobile genetic element.

Mobile self-splicing group I introns from the psbA gene of Chlamydomonas reinhardtii: highly efficient homing of an exogenous intron containing its own promoter

Introns 2 and 4 of the psbA gene of Chlamydomonas reinhardtii chloroplasts (Cr.psbA2 and Cr.psbA4, respectively) contain large free-standing open reading frames (ORFs). We used transformation of an intronless-psbA strain (IL) to test whether these introns undergo homing. Each intron, plus short exon sequences, was cloned into a chloroplast expression vector in both orientations and then cotransformed into IL along with a spectinomycin resistance marker (16S rrn). For Cr.psbA2, the sense construct gave nearly 100% cointegration of the intron whereas the antisense construct gave 0%, consistent with homing. For Cr.psbA4, however, both orientations produced highly efficient cointegration of the intron. Efficient cointegration of Cr.psbA4 also occurred when the intron was introduced as a restriction fragment lacking any known promoter. Deletion of most of the ORF, however, abolished cointegration of the intron, consistent with homing. The Cr.psbA4 constructs also contained a 3-(3,4-dichlorophenyl)-1,1-dimethylurea resistance marker in exon 5, which was always present when the intron integrated, thus demonstrating exon coconversion. Remarkably, primary selection for this marker gave >100-fold more transformants (>10,000/microgram of DNA) than did the spectinomycin resistance marker. A trans homing assay was developed for Cr.psbA4; the ORF-minus intron integrated when the ORF was cotransformed on a separate plasmid. This assay was used to identify an intronic region between bp -88 and -194 (relative to the ORF) that stimulated homing and contained a possible bacterial (-10, -35)-type promoter. Primer extension analysis detected a transcript that could originate from this promoter. Thus, this mobile, self-splicing intron also contains its own promoter for ORF expression. The implications of these results for horizontal intron transfer and organelle transformation are discussed.

Quantitative studies of Mn(2+)-promoted specific and non-specific cleavages of a large RNA: Mn(2+)-GAAA ribozymes and the evolution of small ribozymes

Manganese (Mn(2+)) promotes specific cleavage at two major (I and III) and four minor (II, IV, V and VI) sites, in addition to slow non-specific cleavage, in a 659-nucleotide RNA containing the Cr.LSU group I intron. The specific cleavages occurred between G and AAA sequences and thus can be considered Mn(2+)-GAAA ribozymes. We have estimated rates of specific and non-specific cleavages under different conditions. Comparisons of the rates of major-specific and background cleavages gave a maximal specificity of approximately 900 for GAAA cleavage. Both specific and non-specific cleavages showed hyperbolic kinetics and there was no evidence of cooperativity with Mn(2+) concentration. Interestingly, at site III, Mg(2+) alone promoted weak, but the same specific cleavage as Mn(2+). When added with Mn(2+), Mg(2+) had a synergistic effect on cleavage at site III, but inhibited cleavage at the other sites. Mn(2+) cleavage at site III also exhibited lower values of K (Mn(2+) requirement), pH-dependency and activation energy than did cleavage at the other sites. In contrast, the pH-dependency and activation energy for cleavage at site I was similar to non-specific cleavage. These results increase our understanding of the Mn(2+)-GAAA ribozyme. The implications for evolution of small ribozymes are also discussed.

Processing of a composite large subunit rRNA. Studies with chlamydomonas mutants deficient in maturation of the 23s-like rrna

(Cr.LSU). Little is known of the cis and trans requirements or of the processing pathway for this essential RNA. Previous work showed that the ribosome-deficient ac20 mutant overaccumulates an unspliced large subunit (LSU) RNA, suggesting that it might be a splicing mutant. To elucidate the molecular basis of the ac20 phenotype, a detailed analysis of the rrn transcripts in ac20 and wild-type cells was performed. The results indicate that processing of the ITSs, particularly ITS-1, is inefficient in ac20 and that ITS processing occurs after splicing. Deletion of the Cr.LSU intron from ac20 also did not alleviate the mutant phenotype. Thus, the primary defect in ac20 is not splicing but most likely is associated with ITS processing. A splicing deficiency was studied by transforming wild-type cells with rrnL genes containing point mutations in the intron core. Heteroplasmic transformants were obtained in most cases, except for P4 helix mutants; these strains grew slowly, were light sensitive, and had an RNA profile indicative of inefficient splicing. Transcript analysis in the P4 mutants also indicated that ITS processing can occur on an unspliced precursor, although with reduced efficiency. These latter results indicate that although there is not an absolutely required order for LSU processing, there does seem to be a preferred order that results in efficient processing in vivo.

Genetic analysis of the Chlamydomonas reinhardtii I-CreI mobile intron homing system in Escherichia coli

We have developed and used a genetic selection system in Escherichia coli to study functional requirements for homing site recognition and cleavage by a representative eukaryotic mobile intron endonuclease. The homing endonuclease, I-CreI, was originally isolated from the chloroplast of the unicellular green alga Chlamydomonas reinhardtii. I-CreI homing site mutants contained base pair substitutions or single base deletions that altered the rate of homing site cleavage and/or product release. I-CreI endonuclease mutants fell into six phenotypic classes that differed in in vivo activity, toxicity or genetic dominance. Inactivating mutations clustered in the N-terminal 60% of the I-CreI amino acid sequence, and two frameshift mutations were isolated that resulted in premature translation termination though retained partial activity. These mutations indicate that the N-terminal two-thirds of the I-CreI endonuclease is sufficient for homing site recognition and cleavage. Substitution mutations altered in four potential active site residues were examined: D20N, Q47H or R70A substitutions inactivated endonuclease activity, whereas S22A did not. The genetic approach we have taken complements phylogenetic and structural studies of mobile intron endonucleases and has provided new information on the mechanistic basis of I-CreI homing site recognition and cleavage.

Coordination of nuclear and chloroplast gene expression in plant cells

Plastid proteins are encoded in two genomes, one in the nucleus and the other in the organelle. The expression of genes in these two compartments in coordinated during development and in response to environmental parameters such as light. Two converging approaches reveal features of this coordination: the biochemical analysis of proteins involved in gene expression, and the genetic analysis of mutants affected in plastid function or development. Because the majority of proteins implicated in plastid gene expression are encoded in the nucleus, regulatory processes in the nucleus and in the cytoplasm control plastid gene expression, in particular during development. Many nucleus-encoded factors involved in transcriptional and posttranscriptional steps of plastid gene expression have been characterized. We are also beginning to understand whether and how certain developmental or environmental signals perceived in one compartment may be transduced to the other.

Purification, biochemical characterization and protein-DNA interactions of the I-CreI endonuclease produced in Escherichia coli

I- CreI is a member of the LAGLI-DADG family of homing nucleases; however, unlike most members of this family it contains only a single copy of this signature motif. I- CreI was over-expressed in Escherichia coli, and a simple purification protocol developed that gave reasonably pure protein in high yield. Size-exclusion chromatography and chemical cross-linking indicated that the protein is a dimer in solution. DNA cleavage by I- CreI was absolutely dependent on Mg2+(or Mn2+), and was inhibited by monovalent cations. I- CreI displayed a surprisingly high temperature optimum (>50 degrees C), with full activity occurring even at 70 degrees C. Interestingly, SDS was needed for efficient release of the cleavage products from the protein, indicating formation of very stable DNA-protein complexes. In contrast to these robust characteristics, purified I- CreI was unstable; however, it could be stabilized by the addition of either target or non-target DNA. Mobility shift assays revealed that I- CreI binds to DNA in the absence of Mg2+. Hydroxyl radical footprinting showed that I- CreI strongly protected the backbone of a continuous stretch of at least 12 nt on each strand that were shifted, relative to each other, by 2 bp in the 3'direction. Methylation protection and interference analyses were also performed, and together with the hydroxyl radical footprinting, indicate that I- CreI binds in both the major and minor grooves of its target DNA.

The structure of I-Crel, a group I intron-encoded homing endonuclease

The structure of I-Crel provides the first view of a protein encoded by a gene within an intron. This endonuclease recognizes a long DNA site approximately 20 base pairs in length and facilitates the lateral transfer of that intron. The protein exhibits a DNA-binding surface consisting of four antiparallel beta-strands that form a 20 A wide groove which is over 70 A long. The architecture of this fold is different from that of the TATA binding protein, TBP, which also contains an antiparallel beta-saddle. The conserved LAGLIDADG motif, which is found in many mobile intron endonucleases, maturases and inteins, forms a novel helical interface and contributes essential residues to the active site.

Crystallization and preliminary X-ray studies of I-CreI: a group I intron-encoded endonuclease from C. reinhardtii

Group I intron endonuclease I-CreI is encoded by an open reading frame contained within a self-splicing intron in the Chlamydomonas reinhardtii chloroplast 23S rRNA gene. I-CreI initiates the lateral transfer or homing of this intron by specifically recognizing and cleaving a pseudopalindromic 19-24 bp homing site in chloroplast 23S rRNA genes that lack the intron. The gene encoding this enzyme has been subcloned, and the protein product has been purified and crystallized. The crystals belong to space group P321, with unit cell dimensions a = b = 78.2 A, c = 67.4 A. The crystal unit cell is consistent with an asymmetric unit consisting of the enzyme monomer. The specific volume of this unit cell is 3.3 A3/Da. The crystals diffract to at least 3.0 A resolution after flash-cooling, when using a rotating anode x-ray source and an RAXIS image plate detector.

Evidence for light/redox-regulated splicing of psbA pre-RNAs in Chlamydomonas chloroplasts

Efficient splicing in vivo of most self-splicing group I introns is believed to require proteins, raising the possibility that splicing could be regulated; however, examples of such regulation have been lacking. The Chlamydomonas reinhardtii chloroplast psbA gene contains four large group I introns that self-splice efficiently in vitro, but only under nonphysiological conditions. The psbA gene encodes the D1 protein of photosystem II, which is synthesized at very high rates in the light in order to replace photodamaged protein. We show that psbA pre-mRNAs, containing one or more introns, accumulate in wild-type cells in the dark, apparently due to rate-limited splicing. Analysis of the pre-RNAs indicates that splicing of the four introns does not follow a strict order. Exposure of cells to light induced rapid (15-20 min) decreases in precursor levels of approximately 3-5-fold (depending on the intron), which were accompanied by transient increases in free intron levels. Because light also stimulated psbA transcription approximately 2-fold over the same period, the data suggests that light increases the splicing efficiency of psbA introns approximately 6-10-fold. Similar estimates of the extent of light stimulation were obtained by analyzing precursor decay rates in the presence of actinomycin D. The effect of light is specific for psbA introns, because levels of unspliced 23S pre-RNA did not decrease. The light-induced increase in psbA pre-RNA processing was abolished by inhibitors of photosynthetic electron transport, but not by the ATP synthesis inhibitor, carbonylcyanide m-chlorophenylhydrazone, which actually promoted pre-RNA processing in the dark. Finally, nonphotosynthetic mutants, including the tscA-lacking photosystem I mutant, H13, did not show evidence of light-stimulated RNA processing. However, the light response was restored in photosynthetic transformants of H13 that had been complemented with the tscA gene. These data suggest strongly that light coordinately stimulates splicing of all four psbA introns. Moreover, they demonstrate that this response to light is mediated by photosynthetic electron transport. The implications of these results for the regulation of psbA gene expression are discussed.

Double strand break-induced recombination in Chlamydomonas reinhardtii chloroplasts

The mechanisms of chloroplast recombination are largely unknown. Using the chloroplast-encoded homing endonuclease I-CreI from Chlamydomonas reinhardtii, an experimental system is described that allows the study of double strand break (DSB)-induced recombination in chloroplasts. The I-CreI endonuclease is encoded by the chloroplast ribosomal group I intron of C.reinhardtii and cleaves specifically intronless copies of the large ribosomal RNA (23S) gene. To study DSB-induced recombination in chloroplast DNA, the genes encoding the I-CreI endonuclease were deleted and a target site for I-CreI, embedded in a cDNA of the 23S gene, was integrated at an ectopic location. Endonuclease function was transiently provided by mating the strains containing the recombination substrate to a wild-type strain. The outcome of DSB repair was analyzed in haploid progeny of these crosses. Interestingly, resolution of DSB repair strictly depended upon the relative orientation of the ectopic ribosomal cDNA and the adjacent copy of the 23S gene. Gene conversion was observed when the 23S cDNA and the neighbouring copy of the 23S gene were in opposite orientation, leading to mobilization of the intron to the 23S cDNA. In contrast, arrangement of the 23S cDNA in direct repeat orientation relative to the proximal 23S gene resulted in a deletion between the 23S cDNA and the 23S gene. These results demonstrate that C.reinhardtii chloroplasts have an efficient system for DSB repair and that homologous recombination is strongly stimulated by DSBs in chloroplast DNA.

The atpF group-II intron-containing gene from spinach chloroplasts is not spliced in transgenic Chlamydomonas chloroplasts

In order to determine whether the group-II trans-splicing machinery of the chloroplast of Chlamydomonas reinhardtii can splice a heterologous group-II cis intron, the atpF gene of spinach was transferred into the chloroplast genome of C. reinhardtii using the atpX expression vector. The atpF gene contains a group-II intron which, like other higher plant chloroplast introns, does not self-splice in vitro. The chimeric transgene was expressed at high levels, based on the accumulation of the precursor; however, spliced products could not be detected by Northern blotting, or by RT-PCR coupled with Southern-blot hybridization of the amplified products with an exon-junction probe. These results indicate that the spinach atpF intron is not spliced in transgenic C. reinhardtii chloroplasts. Thus, splicing of chloroplast introns mediated by cellular factors may be species-specific; alternately, the group-II splicing machinery of C. reinhardtii is specific for trans spliced introns.

In vitro self-splicing reactions of chloroplast and mitochondrial group-I introns in Chlamydomonas eugametos and Chlamydomonas moewusii

The self-splicing activity of nine chloroplast group-I introns (CeLSU.1 to CeLSU.6, CepsbC.1, CepsbC.2 and CmpsaB.1) and of one mitochondrial group-I intron (CmmtLSU.1) from the interfertile green algae Chlamydomonas eugametos and C. moewusii was examined using RNA templates produced by in vitro transcription of cloned DNA sequences. All introns, with the exception of the mobile intron CeLSU.5 encoding the site-specific I-CeuI endonuclease, were found to catalyze their own splicing in the absence of proteins. The introns that proved to be the best substrates under the conditions employed are CeLSU.1, CeLSU.3, CeLSU.4, CepsbC.1 and CmmtLSU.1. The implications of our results for the origin and spread of group-I introns in the organellar genomes of green algae are discussed.

Chloroplast ribosomes and protein synthesis

Consistent with their postulated origin from endosymbiotic cyanobacteria, chloroplasts of plants and algae have ribosomes whose component RNAs and proteins are strikingly similar to those of eubacteria. Comparison of the secondary structures of 16S rRNAs of chloroplasts and bacteria has been particularly useful in identifying highly conserved regions likely to have essential functions. Comparative analysis of ribosomal protein sequences may likewise prove valuable in determining their roles in protein synthesis. This review is concerned primarily with the RNAs and proteins that constitute the chloroplast ribosome, the genes that encode these components, and their expression. It begins with an overview of chloroplast genome structure in land plants and algae and then presents a brief comparison of chloroplast and prokaryotic protein-synthesizing systems and a more detailed analysis of chloroplast rRNAs and ribosomal proteins. A description of the synthesis and assembly of chloroplast ribosomes follows. The review concludes with discussion of whether chloroplast protein synthesis is essential for cell survival.

Correct in vivo RNA splicing of a mitochondrial intron in algal chloroplasts

The self-splicing group II intron (rl1) from Scenedesmus obliquus mitochondria together with its 6 bp intron binding site (IBS1) were inserted in the correct and inverse orientation into the chloroplast tscA gene from C.reinhardtii. Precursor RNA derived from the chimeric tscA-rl1 gene can be used to demonstrate in vitro self-splicing of the rl1 intron RNA. Using the particle bombardment technique, the tscA-rl1 construct was transferred into the chloroplast of the unicellular alga Chlamydomonas reinhardtii. We recovered transformants which contain the chimeric tscA-rl1 gene as shown by Southern analysis. Hybridization and PCR analysis of transcripts confirmed that the heterologous intron is correctly spliced in vivo. From sequencing of cDNA clones we conclude that the IBS1 sequence is sufficient for correct splicing of the mitochondrial intron in C. reinhardtii chloroplasts. Using specific probes, we demonstrate by Northern hybridization that the mature RNA, as well as an intron-3' exon intermediate, accumulate in transformants containing the rl1 intron, correctly inserted into the tscA gene. As expected, no RNA splicing at all was observed when the intron had an inverted orientation within the tscA gene. In addition, a mutated intron RNA with an altered 3' terminal nucleotide was tested in vivo. In contrast to similar mutants examined in vitro, this mutated RNA shows accumulated intron and intron-3' exon intermediates, but no ligated exons at all. Our approach should prove useful for elucidating nucleotide residues involved in splicing of organelle introns in vivo.

An intron in the nuclear ribosomal DNA of Didymium iridis codes for a group I ribozyme and a novel ribozyme that cooperate in self-splicing

We have discovered a unique group I intron-like insertion (DiSSU) in the nuclear small subunit ribosomal RNA gene of the myxomycete Didymium iridis. By sequence, DiSSU consists of a group I ribozyme at the 5' end, an open reading frame (ORF) in the middle, and a novel element at the 3' end. Intron RNA self-splices in vitro to yield ten major processed RNAs, including a full-length circle. The group I ribozyme can efficiently cleave at an internal processing site, which separates the group I ribozyme from the ORF. Surprisingly, deletion that remove the entire group I ribozyme do not impair cleavage at the 3' splice site, implying that the 3' element itself is a catalytic RNA. Deletions that remove portions of the 3' element prevent utilization of the 5' splice site, suggesting that this element cooperates with the upstream group I ribozyme in splicing. DiSSU appears to be the first example for the cooperative interaction of distinct ribozymes in RNA splicing.

Characterization of the self-splicing products of a mobile intron from the nuclear rDNA of Physarum polycephalum

We have characterized the splicing products formed in vitro from RNA derived from the mobile group I intron in the nuclear rDNA of Physarum polycephalum, Pp LSU 3. This intron is a close relative of the well known Tetrahymena intron Tt LSU 1, being inserted at exactly the same position in the rDNA and sharing about 90% sequence identity with Tt LSU 1 in the conserved elements characteristic of the catalytic core of all group I introns. However, Pp LSU 3 differs from Tt LSU 1 in that it encodes a site-specific endonuclease, which mediates the homing of the intron to unoccupied target sites. The endonuclease, I-Ppo, would appear to be a unique example of a protein encoded by an RNA polymerase I transcript. To gain clues to the splicing products formed in vivo, and to the nature of the messenger RNA for I-Ppo, we subjected Pp LSU 3 RNA to standard self-splicing conditions in vitro, and then analyzed the products by size, by northern blotting, and by primer extension. The results show two novel features. First, in addition to the expected 5' splice site, there is an alternative 5' splice site in the upstream exon, just preceding the first codon of the I-Ppo open reading frame. Second, at the position corresponding to the major circularization site in Tt LSU 1 there is an internal processing site, leading to the efficient separation of two halves of the excised intron, the 5' half encoding I-Ppo and 3' half containing the ribozyme. Surprisingly, this cleavage appears not to be due to circularization followed by hydrolytic opening of the circle, but rather to G addition. The formation of these products in vitro suggests how the messenger RNA for the I-Ppo endonuclease may be generated in vivo.

Cleavage and recognition pattern of a double-strand-specific endonuclease (I-creI) encoded by the chloroplast 23S rRNA intron of Chlamydomonas reinhardtii

Several group-I introns have been shown to specifically invade intron-minus alleles of the genes that contain them. This type of intron mobility is referred to as 'intron homing', and depends on restriction endonucleases (ENases) encoded by the mobile introns. The ENase cleaves the intron-minus allele near the site of intron insertion, thereby initiating gene conversion. The 23S (LSU) rRNA-encoding gene (LSU) of the chloroplast genome of Chlamydomonas reinhardtii contains a self-splicing group-I intron (CrLSU) that has a free-standing open reading frame (ORF) of 163 codons. Translation of CrLSU intron RNA in cell-free systems produces a polypeptide of approx. 18 kDa, the size expected for correct translation of the ORF. The in vitro-synthesized 18-kDa protein cleaves plasmid DNA that contains a portion of LSU where the intron normally resides, but lacking the intron itself. Cleavage by the intron-encoded enzyme (I-CreI) occurs 5 bp and 1 bp 3' to the intron insertion site (in the 3'-exon) in the top (/) and bottom (,) strands, respectively, resulting in 4-nt single-stranded overhangs with 3'-OH termini. We also show that the recognition sequence of I-CreI spans the cleavage site and is 24 bp in length (5'-CAAAACGTC,GTGA/GACAGTTTGGT).