Structural and functional features of cis-acting sequences in the basic replicon of plasmid ColIb-P9

Interaction of the initiator protein of an IncB plasmid with its origin of DNA replication

The replication initiator protein RepA of the IncB plasmid pMU720 was purified and used in DNase I protection assays in vitro. RepA protected a 68-bp region of the origin of replication of pMU720. This region, which lies immediately downstream of the DnaA box, contains four copies of the sequence motif 5'AANCNGCAA3'. Mutational analyses identified this sequence as the binding site specifically recognized by RepA (the RepA box). Binding of RepA to the RepA boxes was ordered and sequential, with the box closest to the DnaA binding site (box 1) occupied first and the most distant boxes (boxes 3 and 4) occupied last. However, only boxes 1, 2, and 4 were essential for origin activity, with box 3 playing a lesser role. Changing the spacing between box 1 and the other three boxes affected binding of RepA in vitro and origin activity in vivo, indicating that the RepA molecules bound to ori(B) interact with one another.

Complete DNA sequence and analysis of the large virulence plasmid of Shigella flexneri

The complete sequence analysis of the 210-kb Shigella flexneri 5a virulence plasmid was determined. Shigella spp. cause dysentery and diarrhea by invasion and spread through the colonic mucosa. Most of the known Shigella virulence determinants are encoded on a large plasmid that is unique to virulent strains of Shigella and enteroinvasive Escherichia coli; these known genes account for approximately 30 to 35% of the virulence plasmid. In the complete sequence of the virulence plasmid, 286 open reading frames (ORFs) were identified. An astonishing 153 (53%) of these were related to known and putative insertion sequence (IS) elements; no known bacterial plasmid has previously been described with such a high proportion of IS elements. Four new IS elements were identified. Fifty putative proteins show no significant homology to proteins of known function; of these, 18 have a G+C content of less than 40%, typical of known virulence genes on the plasmid. These 18 constitute potentially unknown virulence genes. Two alleles of shet2 and five alleles of ipaH were also identified on the plasmid. Thus, the plasmid sequence suggests a remarkable history of IS-mediated acquisition of DNA across bacterial species. The complete sequence will permit targeted characterization of potential new Shigella virulence determinants.

Effect of CIS on activity in trans of the replication initiator protein of an IncB plasmid

RepA, the replication initiator protein of the IncB plasmid pMU720, acts preferentially in cis. The cis activity of RepA is thought to be mediated by CIS, a 166-bp region of DNA separating the coding region of repA from the origin of replication (ori) of pMU720. To investigate the trans activity of RepA, the repA gene, without its cognate ori, was cloned on a multicopy plasmid, pSU39. The ori on which RepA acts was cloned on pAM34, a plasmid whose replicon is inactive without induction by isopropyl-beta-D-thiogalactopyranoside (IPTG). Thus, in the absence of IPTG, replication of the pAM34 derivatives was dependent on activation of the cloned ori by RepA produced in trans from the pSU39 derivatives. The effect of CIS, when present either on the RepA-producing or the ori plasmid or both, on the efficiency of replication of the ori plasmid in vivo, was determined. The presence of CIS, in its native position and orientation, on the RepA-producing plasmid reduced the efficiency of replication of the ori plasmid. This inhibitory activity of CIS was sequence specific and involved interaction with the C-terminal 20 to 37 amino acids of RepA. By contrast, CIS had no effect when present on the ori plasmid. Initiation of replication from the ori in trans was independent of transcription into CIS.

The plasmid ColIb-P9 antisense Inc RNA controls expression of the RepZ replication protein and its positive regulator repY with different mechanisms

The autonomous replication region of plasmid ColIb-P9 contains repZ encoding the RepZ replication protein, and inc and repY as the negative and positive regulators of repZ translation, respectively. inc encodes the antisense Inc RNA, and repY is a short open reading frame upstream of repZ. Translation of repY enables repZ translation by inducing formation of a pseudoknot containing stem-loop I, which base pairs with the sequence preceding the repZ start codon. Inc RNA inhibits both repY translation and formation of the pseudoknot by binding to the loop I. To investigate control of repY expression by Inc RNA, we isolated a number of mutations that express repY in the presence of Inc RNA. One class of mutations delete a part of another stem-loop (II), which derepresses repY expression by initiating translation at codon 10 (GUG), located within this structure. Point mutations in stem-loop II can also derepress repY translation, and the introduction of compensatory base-changes restores control of repY translation. These results not only indicate that suppressing a cryptic start codon by secondary structure is important for maintaining the translational control of repZ but also demonstrate that the position of start site for repY translation is critical for its control by Inc RNA. Thus, Inc RNA controls repY translation by binding in the vicinity of the start codon, in contrast to the control of repZ expression at the level of loop-loop interaction.

Role of CIS in replication of an IncB plasmid

Replication of the IncB plasmid pMU720 requires the synthesis of the cis-acting RepA protein and the presence of two DNA elements, ori and CIS. CIS is the 166-bp sequence separating the RepA coding sequence from ori. To investigate how this organization of the pMU720 replicon contributes to the mechanism of initiation of replication, mutations in the sequence and/or the length of CIS were introduced into the CIS region and their effects on the efficiency of replication of the pMU720 replicon in vivo was determined. The CIS region was found to be composed of two domains. The repA-proximal domain, which showed strong transcription termination activity, could be replaced by equivalent sequences from I-complex and IncL/M plasmids, whose replicons are organized in the same fashion as pMU720. Replacement by a trpA transcription terminator afforded only partial replication activity. The repA-distal domain was shown to be a spacer whose role was to position sequence(s) within ori on the correct face of the DNA helix vis-à-vis the repA-proximal portion of CIS. A model for the loading of RepA protein onto ori is discussed.

Copy number control of IncIalpha plasmid ColIb-P9 by competition between pseudoknot formation and antisense RNA binding at a specific RNA site

Replication of a low-copy-number IncIalpha plasmid ColIb-P9 depends on expression of the repZ gene encoding the replication initiator protein. repZ expression is negatively controlled by the small antisense Inc RNA, and requires formation of a pseudoknot in the RepZ mRNA consisting of stem-loop I, the Inc RNA target, and a downstream sequence complementary to the loop I. The loop I sequence comprises 5'-rUUGGCG-3', conserved in many prokaryotic antisense systems, and was proposed to be the important site of copy number control. Here we show that the level of repZ expression is rate-limiting for replication and thus copy number, by comparing the levels of repZ expression and copy number from different mutant ColIb-P9 derivatives defective in Inc RNA and pseudoknot formation. Kinetic analyses using in vitro transcribed RNAs indicate that Inc RNA binding and the pseudoknot formation are competitive at the level of initial base paring to loop I. This initial interaction is stimulated by the presence of the loop U residue in the 5'-rUUGGCG-3' motif. These results indicate that the competition between the two RNA-RNA interactions at the specific site is a novel regulatory mechanism for establishing the constant level of repZ expression and thus copy number.

Comparative analysis of functional and structural features in the primase-dependent priming signals, G sites, from phages and plasmids

The primase-dependent priming signals, G sites, are directly recognized by the Escherichia coli primase (dnaG gene product) and conduct the synthesis of primer RNAs. In nucleotide sequence and secondary structure, there is no striking resemblance between the phage- and plasmid-derived G sites, except for the limited sequence homology near the start position of primer RNA synthesis. In this study, we analyzed the structure and function of a G site of plasmid R100, G site (R100), and discovered the necessity of the coexistence of two domains (domains I and III), which contains blocks A, B, and C, which are nucleotide sequences highly conserved among the plasmid-derived G sites. However, neither the internal region, domain II, between domains I and III nor the potential secondary structure proposed by Bahk et al. (J. D. Bahk, N. Kioka, H. Sakai, and T. Komano, Plasmid 20:266-270, 1988) is essential for single-stranded DNA initiation activity. Furthermore, chimeric G sites constructed between a G site of phage G4, G site(G4), and G site(R100) maintained significant single-stranded DNA initiation activities. These results strongly suggest that phage- and plasmid-derived G sites have functionally equivalent domains. The primase-dependent priming mechanisms of phage- and plasmid-derived G sites are discussed.

Mutational analysis of the specific priming signal essential for DNA replication of the broad host-range plasmid RSF1010

To analyze the RSF1010-specific priming mechanism, a library of randomly mutagenized ssiA sequences was constructed by chemical synthesis using mixed nucleotide phosphoramidites. Synthetic ssiA sequences with the single base-substitutions were assayed for the SSI activity in E. coli JM109 expressing RepB' primase. It was demonstrated that the activity of ssiA was damaged markedly by single base-substitutions within the possible stem-loop structure and its 3'-flanking region. It is conceivable that these domains are critical in recognition and primer synthesis by RepB' primase.

Roles of the G site and phi X174-type primosome assembly site in priming of leading-strand synthesis: initiation by a mobile primosome and replication-fork arrest by RepA protein bound to oriR

Bacterial replicons often contain single-strand initiation sequences (ssi) such as a G site (a sequence recognized by a dnaG-encoded primase for the synthesis of primer RNA) and a primosome assembly site (pas) near the DNA replication origin (ori). The R1 plasmid contains a G site downstream from oriR, which serves for the priming of the leading-strand synthesis of this plasmid. On the other hand, the F, R6K and Rts1 plasmids carry pas at similar locations relative to the respective ori. In order to assess the functional significance of these pas, R1 plasmid derivatives carrying an n'-pas (phi X174-type pas) in place of the G site were constructed and their replication properties were examined in vitro. Deletion of the G site in the R1 plasmid resulted in a nearly 80% reduction of total DNA synthesis in vitro, which was recovered to the wild-type (wt) level by inserting the G4 complementary ori. Furthermore, insertion of an n'-pas on the leading-strand template restored the in vitro replicative activity to a level 70% of wt. This recovery was dependent on the assembly of the phi X174-type primosome, which efficiently primed leading-strand synthesis and moved toward the oriR. However, the R1 plasmid derivative containing the n'-pas replicated unidirectionally in vitro, probably due to the anti-helicase activity of the RepA protein bound to oriR, which was shown by helicase assays using partial heteroduplexes as substrates.(ABSTRACT TRUNCATED AT 250 WORDS)