Bulged-out nucleotides protect an antisense RNA from RNase III cleavage

Bacterial RNase III: Targets and physiology

Bacteria can rapidly adapt to changes in their environment thanks to the innate flexibility of their genetic expression. The high turnover rate of RNAs, in particular messenger and regulatory RNAs, provides an important contribution to this dynamic adjustment. Recycling of RNAs is ensured by ribonucleases, among which RNase III is the focus of this review. RNase III enzymes are highly conserved from prokaryotes to eukaryotes and have the specific ability to cleave double-stranded RNAs. The role of RNase III in bacterial physiology has remained poorly explored for a long time. However, transcriptomic approaches recently uncovered a large impact of RNase III in gene expression in a wide range of bacteria, generating renewed interest in the physiological role of RNase III. In this review, we first describe the RNase III targets identified from global approaches in 8 bacterial species within 4 Phyla. We then present the conserved and unique functions of bacterial RNase III focusing on growth, resistance to stress, biofilm formation, motility and virulence. Altogether, this review highlights the underestimated impact of RNase III in bacterial adaptation.

Development of Design Rules for Reliable Antisense RNA Behavior in E. coli

A key driver of synthetic biology is the development of designable genetic parts with predictable behaviors that can be quickly implemented in complex genetic systems. However, the intrinsic complexity of gene regulation can make the rational design of genetic parts challenging. This challenge is apparent in the design of antisense RNA (asRNA) regulators. Though asRNAs are well-known regulators, the literature governing their design is conflicting and leaves the synthetic biology community without clear asRNA design rules. The goal of this study is to perform a comprehensive experimental characterization and statistical analysis of 121 unique asRNA regulators in order to resolve the conflicts that currently exist in the literature. asRNAs usually consist of two regions, the Hfq binding site and the target binding region (TBR). First, the behaviors of several high-performing Hfq binding sites were compared, in terms of their ability to improve repression efficiencies and their orthogonality. Next, a large-scale analysis of TBR design parameters identified asRNA length, the thermodynamics of asRNA-mRNA complex formation, and the percent of target mismatch as key parameters for TBR design. These parameters were used to develop simple asRNA design rules. Finally, these design rules were applied to construct both a simple and a complex genetic circuit containing different asRNAs, and predictable behavior was observed in both circuits. The results presented in this study will drive synthetic biology forward by providing useful design guidelines for the construction of asRNA regulators with predictable behaviors.

Using in-cell SHAPE-Seq and simulations to probe structure-function design principles of RNA transcriptional regulators

Antisense RNA-mediated transcriptional regulators are powerful tools for controlling gene expression and creating synthetic gene networks. RNA transcriptional repressors derived from natural mechanisms called attenuators are particularly versatile, though their mechanistic complexity has made them difficult to engineer. Here we identify a new structure-function design principle for attenuators that enables the forward engineering of new RNA transcriptional repressors. Using in-cell SHAPE-Seq to characterize the structures of attenuator variants within Escherichia coli, we show that attenuator hairpins that facilitate interaction with antisense RNAs require interior loops for proper function. Molecular dynamics simulations of these attenuator variants suggest these interior loops impart structural flexibility. We further observe hairpin flexibility in the cellular structures of natural RNA mechanisms that use antisense RNA interactions to repress translation, confirming earlier results from in vitro studies. Finally, we design new transcriptional attenuators in silico using an interior loop as a structural requirement and show that they function as desired in vivo. This work establishes interior loops as an important structural element for designing synthetic RNA gene regulators. We anticipate that the coupling of experimental measurement of cellular RNA structure and function with computational modeling will enable rapid discovery of structure-function design principles for a diverse array of natural and synthetic RNA regulators.

Rapid and high-throughput construction of microbial cell-factories with regulatory noncoding RNAs

Due to global crises such as pollution and depletion of fossil fuels, sustainable technologies based on microbial cell-factories have been garnering great interest as an alternative to chemical factories. The development of microbial cell-factories is imperative in cutting down the overall manufacturing cost. Thus, diverse metabolic engineering strategies and engineering tools have been established to obtain a preferred genotype and phenotype displaying superior productivity. However, these tools are limited to only a handful of genes with permanent modification of a genome and significant labor costs, and this is one of the bottlenecks associated with biofactory construction. Therefore, a groundbreaking rapid and high-throughput engineering tool is needed for efficient construction of microbial cell-factories. During the last decade, copious small noncoding RNAs (ncRNAs) have been discovered in bacteria. These are involved in substantial regulatory roles like transcriptional and post-transcriptional gene regulation by modulating mRNA elongation, stability, or translational efficiency. Because of their vulnerability, ncRNAs can be used as another layer of conditional control over gene expression without modifying chromosomal sequences, and hence would be a promising high-throughput tool for metabolic engineering. Here, we review successful design principles and applications of ncRNAs for high-throughput metabolic engineering or physiological studies of diverse industrially important microorganisms.

Design, synthesis, and application of Spinach molecular beacons triggered by strand displacement

We describe design parameters for the synthesis and analytical application of a label-free RNA molecular beacon, termed Spinach.ST. The RNA aptamer Spinach fluoresces upon binding the small-molecule fluorophore DFHBI ((Z)-4-(3,5-difluoro-4-hydroxybenzylidene)-1,2-dimethyl-1H-imidazol-5(4H)-one). Spinach has been reengineered by extending its 5'- and 3'-ends to create Spinach.ST, which is predicted to fold into an inactive conformation that fails to bind DHFBI. Hybridization of a trigger oligonucleotide to a designed toehold on Spinach.ST initiates toehold-mediated strand displacement and restores the DFHBI-binding, fluorescence-enhancing conformation of Spinach. The versatile Spinach.ST sensor can detect DNA or RNA trigger sequences and can readily distinguish single-nucleotide mismatches in the trigger toehold. Primer design techniques are described that augment amplicons produced by enzymatic amplification with Spinach.ST triggers. Interaction between these triggers and Spinach.ST molecular beacons leads to the real-time, sequence-specific quantitation of these amplicons. The use of Spinach.ST with isothermal amplification reactions such as nucleic acid sequence-based amplification (NASBA) may enable point-of-care applications. The same design principles could also be used to adapt Spinach reporters to the assay of nonnucleic acid analytes in trans.

Design of riboregulators for control of cyanobacterial (Synechocystis) protein expression

Cyanobacteria are attractive host bacteria for biofuel production because they can covert CO2 to biofuel lipids using only sunlight, water, and inorganic ions. For genetically engineering an ideal cyanobacterium, a synthetic biological approach is promising but few genetic components have been characterized in cyanobacteria. Here for controlling cyanobacterial protein expression, we constructed riboregulators, that one of the post-transcriptional regulators composed of RNAs. Riboregulators harboring a ribosome-binding site suitable for Synechocystis sp. were designed by trial and error using Escherichia coli as host bacteria. The designed riboregulators were effective in Synechocystis sp. as well as E. coli with slight interference on growth only observed in E. coli. They will therefore be useful tools for controlling target gene expression.

Synthetic RNA Silencing of Actinorhodin Biosynthesis in Streptomyces coelicolor A3(2)

We demonstrate the first application of synthetic RNA gene silencers in Streptomyces coelicolor A3(2). Peptide nucleic acid and expressed antisense RNA silencers successfully inhibited actinorhodin production. Synthetic RNA silencing was target-specific and is a new tool for gene regulation and metabolic engineering studies in Streptomyces.

A modular strategy for engineering orthogonal chimeric RNA transcription regulators

Antisense RNA transcription attenuators are a key component of the synthetic biology toolbox, with their ability to serve as building blocks for both signal integration logic circuits and transcriptional cascades. However, a central challenge to building more sophisticated RNA genetic circuitry is creating larger families of orthogonal attenuators that function independently of each other. Here, we overcome this challenge by developing a modular strategy to create chimeric fusions between the engineered transcriptional attenuator from plasmid pT181 and natural antisense RNA translational regulators. Using in vivo gene expression assays in Escherichia coli, we demonstrate our ability to create chimeric attenuators by fusing sequences from five different translational regulators. Mutagenesis of these functional attenuators allowed us to create a total of 11 new chimeric attenutaors. A comprehensive orthogonality test of these culminated in a 7 × 7 matrix of mutually orthogonal regulators. A comparison between all chimeras tested led to design principles that will facilitate further engineering of orthogonal RNA transcription regulators, and may help elucidate general principles of non-coding RNA regulation. We anticipate that our strategy will accelerate the development of even larger families of orthogonal RNA transcription regulators, and thus create breakthroughs in our ability to construct increasingly sophisticated RNA genetic circuitry.

Two antisense RNAs target the transcriptional regulator CsgD to inhibit curli synthesis

Escherichia coli produces proteinaceous surface structures called curli that are involved in adhesion and biofilm formation. CsgD is the transcriptional activator of curli genes. We show here that csgD expression is, in part, controlled post-transcriptionally by two redundant small RNAs (sRNAs), OmrA and OmrB. Their overexpression results in curli deficiency, in accordance with the inhibition of chromosomally encoded, FLAG-tagged CsgD. Downregulation of csgD occurs by a direct antisense interaction within the csgD 5'-UTR, far upstream of the ribosome-binding site (RBS). OmrA/B downregulate plasmid-borne csgD-gfp fusions in vivo, and inhibit CsgD translation in vitro. The RNA chaperone Hfq is required for normal csgD mRNA and OmrA/B levels in the cell, and enhances sRNA-dependent inhibition of csgD translation in vitro. Translational inhibition involves two phylogenetically conserved secondary structure modules that are supported by chemical and enzymatic probing. The 5'-most element is necessary and sufficient for regulation, the one downstream comprises the RBS and affects translational efficiency. OmrA/B are two antisense RNAs that regulate a transcription factor to alter a morphotype and group behaviour.

Conservation and diversity in the immunity regions of wild phages with the immunity specificity of phage lambda

The gene regulatory circuitry of phage lambda is among the best-understood circuits. Much of the circuitry centres around the immunity region, which includes genes for two repressors, CI and Cro, and their cis-acting sites. Related phages, termed lambdoid phages, have different immunity regions, but similar regulatory circuitry and genome organization to that of lambda, and show a mosaic organization, arising by recombination between lambdoid phages. We sequenced the immunity regions of several wild phages with the immunity specificity of lambda, both to determine whether natural variation exists in regulation, and to analyse conservation and variability in a region rich in well-studied regulatory elements. CI, Cro and their cis-acting sites are almost identical to those in lambda, implying that regulatory mechanisms controlled by the immunity region are conserved. A segment adjacent to one of the operator regions is also conserved, and may be a novel regulatory element. In most isolates, different alleles of two regulatory proteins (N and CII) flank the immunity region; possibly the lysis-lysogeny decision is more variable among isolates. Extensive mosaicism was observed for several elements flanking the immunity region. Very short sequence elements or microhomologies were also identified. Our findings suggest mechanisms by which fine-scale mosaicism arises.

Replication control of staphylococcal multiresistance plasmid pSK41: an antisense RNA mediates dual-level regulation of Rep expression

Replication of staphylococcal multiresistance plasmid pSK41 is negatively regulated by the antisense transcript RNAI. pSK41 minireplicons bearing rnaI promoter (PrnaI) mutations exhibited dramatic increases in copy number, approximately 40-fold higher than the copy number for the wild-type replicon. The effects of RNAI mutations on expression of the replication initiator protein (Rep) were evaluated using transcriptional and translational fusions between the rep control region and the cat reporter gene. The results suggested that when PrnaI is disrupted, the amount of rep mRNA increases and it becomes derepressed for translation. These effects were reversed when RNAI was provided in trans, demonstrating that it is responsible for significant negative regulation at two levels, with the greatest repression exerted on rep translation initiation. Mutagenesis provided no evidence for RNAI-mediated transcriptional attenuation as a basis for the observed reduction in rep message associated with expression of RNAI. However, RNA secondary-structure predictions and supporting mutagenesis data suggest a novel mechanism for RNAI-mediated repression of rep translation initiation, where RNAI binding promotes a steric transition in the rep mRNA leader to an alternative thermodynamically stable stem-loop structure that sequesters the rep translation initiation region, thereby preventing translation.

RNase E cleavage in the 5' leader of a tRNA precursor

In this study, we have used various tRNA(Tyr)Su3 precursor (pSu3) derivatives that are processed less efficiently by RNase P to investigate if the 5' leader is a target for RNase E. We present data that suggest that RNase E cleaves the 5' leader of pSu3 both in vivo and in vitro. The site of cleavage in the 5' leader corresponds to the cleavage site for a previously identified endonuclease activity referred to as RNase P2/O. Thus, our findings suggest that RNase P2/O and RNase E activities are of the same origin. These data are in keeping with the suggestion that the structure of the 5' leader influences tRNA expression by affecting tRNA processing and indicate the involvement of RNase E in the regulation of cellular tRNA levels.

Hfq-dependent regulation of OmpA synthesis is mediated by an antisense RNA

This paper shows that the small RNA MicA (previously SraD) is an antisense regulator of ompA in Escherichia coli. MicA accumulates upon entry into stationary phase and down-regulates the level of ompA mRNA. Regulation of ompA (outer membrane protein A), previously attributed to Hfq/mRNA binding, is lost upon deletion of the micA gene, whereas overexpression of MicA inhibits the synthesis of OmpA. In vitro, MicA binds to the ompA mRNA leader. Enzymatic and chemical probing was used to map the structures of MicA, the ompA mRNA leader, and the complex formed upon binding. MicA binding generates a footprint across the ompA Shine-Dalgarno sequence, consistent with a 12 + 4 base-pair interaction, which is additionally supported by the effect of mutations in vivo and by bioinformatics analysis of enterobacterial micA/ompA homolog sequences. MicA is conserved in many enterobacteria, as is its ompA target site. In vitro toeprinting confirmed that binding of MicA specifically interferes with ribosome binding. We propose that MicA, when present at high levels, blocks ribosome binding at the ompA translation start site, which-in line with previous work-secondarily facilitates RNase E cleavage and subsequent mRNA decay. MicA requires the presence of the Hfq protein, although the mechanistic basis for this remains unclear.

Plasmid R1--replication and its control

Plasmid R1 is a low-copy-number plasmid belonging to the IncFII group. The genetics, biochemistry, molecular biology, and physiology of R1 replication and its control are summarised and discussed in the present communication. Replication of R1 starts at a unique origin, oriR1, and proceeds unidirectionally according to the Theta mode. Plasmid R1 replicates during the entire cell cycle and the R1 copies in the cell are members of a pool from which a plasmid copy at random is selected for replication. However, there is an eclipse period during which a newly replicated copy does not belong to this pool. Replication of R1 is controlled by an antisense RNA, CopA, that is unstable and formed constitutively; hence, its concentration is a measure of the concentration of the plasmid. CopA-RNA interacts with its complementary target, CopT-RNA, that is located upstream of the RepA message on the repA-mRNA. CopA-RNA post-transcriptionally inhibits translation of the repA-mRNA. CopA- and CopT-RNA interact in a bimolecular reaction which results in an inverse proportionality between the relative rate of replication (replications per plasmid copy and cell cycle) and the copy number; the number of replications per cell and cell cycle, n, is independent of the actual copy number in the individual cells, the so-called +n mode of control. Single base-pair substitutions in the copA/copT region of the plasmid genome may result in mutants that are compatible with the wild type. Loss of CopA activity results in (uncontrolled) so-called runaway replication, which is lethal to the host but useful for the production of proteins from cloned genes. Plasmid R1 also has an ancillary control system, CopB, that derepresses the synthesis of repA-mRNA in cells that happen to contain lower than normal number of copies. Plasmid R1, as other plasmids, form clusters in the cell and plasmid replication is assumed to take place in the centre of the cells; this requires traffic from the cluster to the replication factories and back to the clusters. The clusters are plasmid-specific and presumably based on sequence homology.

Engineered riboregulators enable post-transcriptional control of gene expression

Recent studies have demonstrated the important enzymatic, structural and regulatory roles of RNA in the cell. Here we present a post-transcriptional regulation system in Escherichia coli that uses RNA to both silence and activate gene expression. We inserted a complementary cis sequence directly upstream of the ribosome binding site in a target gene. Upon transcription, this cis-repressive sequence causes a stem-loop structure to form at the 5'-untranslated region of the mRNA. The stem-loop structure interferes with ribosome binding, silencing gene expression. A small noncoding RNA that is expressed in trans targets the cis-repressed RNA with high specificity, causing an alteration in the stem-loop structure that activates expression. Such engineered riboregulators may lend insight into mechanistic actions of endogenous RNA-based processes and could serve as scalable components of biological networks, able to function with any promoter or gene to directly control gene expression.

Lead(II) as a probe for investigating RNA structure in vivo

In this communication, we describe a simple and reliable method for RNA structure determination in vivo, using the divalent ion, lead(II), as a structural probe. Lead(II) is known to cleave RNA within single-stranded regions, loops, and bulges, whereas cleavages in double-stranded regions are weaker or absent. Because the ion easily entered bacterial cells, Escherichia coli cultures were treated by addition of 50-100 mM lead(II) acetate for 3-7 min, resulting in partial cleavage of RNA in vivo. Cleavage positions were mapped by reverse transcription analysis of total extracted RNA. Three RNAs were analyzed: tmRNA, CopT (the target of the antisense RNA CopA), and the leader region of the ompF mRNA. All three RNAs had previously been analyzed in vitro, and secondary structure models were available. The results presented here show that lead(II) cleavages in vivo yield detailed structural information for these RNAs, which was in good agreement with the models proposed based on in vitro work. These data illustrate the potential of lead(II) as a sequence-independent RNA structure probe for use in living cells.

Bulged residues promote the progression of a loop-loop interaction to a stable and inhibitory antisense-target RNA complex

In several groups of bacterial plasmids, antisense RNAs regulate copy number through inhibition of replication initiator protein synthesis. These RNAs are characterized by a long hairpin structure interrupted by several unpaired residues or bulged loops. In plasmid R1, the inhibitory complex between the antisense RNA (CopA) and its target mRNA (CopT) is characterized by a four-way junction structure and a side-by-side helical alignment. This topology facilitates the formation of a stabilizer intermolecular helix between distal regions of both RNAs, essential for in vivo control. The bulged residues in CopA/CopT were shown to be required for high in vitro binding rate and in vivo activity. This study addresses the question of why removal of bulged nucleotides blocks stable complex formation. Structure mapping, modification interference, and molecular modeling of bulged-less mutant CopA-CopT complexes suggests that, subsequent to loop-loop contact, helix propagation is prevented. Instead, a fully base paired loop-loop interaction is formed, inducing a continuous stacking of three helices. Consequently, the stabilizer helix cannot be formed, and stable complex formation is blocked. In contrast to the four-way junction topology, the loop-loop interaction alone failed to prevent ribosome binding at its loading site and, thus, inhibition of RepA translation was alleviated.

Introduction of an RNA stability element at the 5'-end of an antisense RNA cassette increases the inhibition of target RNA translation

This communication describes improvement strategies used on a previously described two-unit antisense RNA cassette system. This cassette system encodes RNA with noncontiguous regions of complementarity to a bacterial target RNA, lacI mRNA. One of the units of complementarity was contained within an RNA stem-loop resembling that of the very efficient, naturally occurring antisense RNA CopA. As relatively low inhibitory activity was obtained previously, we tested variants in which several stem-loops were combined within one RNA, each of them directed against a different stretch of target RNA. One to four stem-loop RNAs were tested and found to be relatively ineffective, likely because of low metabolic stability. To increase the intracellular stability of these and other antisense RNAs, a stabilizer element (stem-loop derived from gene 32 mRNA of phage T4) was inserted at their 5'-ends. The results indicate that addition of this element indeed increased antisense RNA efficiency in vivo. As expected, this effect was primarily due to a longer antisense RNA half-life, as shown by RNA abundance (Northern analysis) and decay rates (rifampicin runout experiments). In summary, the results reported indicate that rational design of antisense RNA is feasible, but that the degree of inhibition (approximately 75% maximum inhibition) accomplished here could still be improved.

An unusual structure formed by antisense-target RNA binding involves an extended kissing complex with a four-way junction and a side-by-side helical alignment

The antisense RNA CopA binds to the leader region of the repA mRNA (target: CopT). Previous studies on CopA-CopT pairing in vitro showed that the dominant product of antisense RNA-mRNA binding is not a full RNA duplex. We have studied here the structure of CopA-CopT complex, combining chemical and enzymatic probing and computer graphic modeling. CopI, a truncated derivative of CopA unable to bind CopT stably, was also analyzed. We show here that after initial loop-loop interaction (kissing), helix propagation resulted in an extended kissing complex that involves the formation of two intermolecular helices. By introducing mutations (base-pair inversions) into the upper stem regions of CopA and CopT, the boundaries of the two newly formed intermolecular helices were delimited. The resulting extended kissing complex represents a new type of four-way junction structure that adopts an asymmetrical X-shaped conformation formed by two helical domains, each one generated by coaxial stacking of two helices. This structure motif induces a side-by-side alignment of two long intramolecular helices that, in turn, facilitates the formation of an additional intermolecular helix that greatly stabilizes the inhibitory CopA-CopT RNA complex. This stabilizer helix cannot form in CopI-CopT complexes due to absence of the sequences involved. The functional significance of the three-dimensional models of the extended kissing complex (CopI-CopT) and the stable complex (CopA-CopT) are discussed.

Ribonuclease III processing of coaxially stacked RNA helices

The RNase III family of endoribonucleases participates in maturation and decay of cellular and viral transcripts by processing of double-stranded RNA. RNase III degradation is inherent to most antisense RNA-regulated gene systems in Escherichia coli. In the hok/sok system from plasmid R1, Sok antisense RNA targets the hok mRNA for RNase III-mediated degradation. An intermediate in the pairing reaction between Sok RNA and hok mRNA forms a three-way junction. A complex between a chimeric antisense RNA and hok mRNA that mimics the three-way junction was cleaved by RNase III both in vivo and in vitro. Footprinting using E117A RNase III binding to partially complementary RNAs showed protection of the 13 base pairs of interstrand duplex and of the bottom part of the transcriptional terminator hairpin of the antisense RNA. This suggests that the 13 base pairs of RNA duplex are coaxially stacked on the antisense RNA terminator stem-loop and that each stem forms a monomer half-site, allowing symmetrical binding of the RNase III dimer. This processing scheme shows an unanticipated diversity in RNase III substrates and may have a more general implication for RNA metabolism.

Function, mechanism and regulation of bacterial ribonucleases

The maturation and degradation of RNA molecules are essential features of the mechanism of gene expression, and provide the two main points for post-transcriptional regulation. Cells employ a functionally diverse array of nucleases to carry out RNA maturation and turnover. Viruses also employ cellular ribonucleases, or even use their own in their reproductive cycles. Studies on bacterial ribonucleases, and in particular those from Escherichia coli, are providing insight into ribonuclease structure, mechanism, and regulation. Ongoing biochemical and genetic analyses are revealing that many ribonucleases are phylogenetically conserved, and exhibit overlapping functional roles and perhaps common catalytic mechanisms. This article reviews the salient features of bacterial ribonucleases, with a focus on those of E. coli, and in particular, ribonuclease III. RNase III participates in a number of RNA maturation and RNA decay pathways, and is regulated by phosphorylation in the T7 phage-infected cell. Plasmid and phage RNAs, in addition to cellular transcripts, are RNase III targets. RNase III orthologues occur in eukaryotic cells, and play key functional roles. As such, RNase III provides an important model with which to understand mechanisms of RNA maturation, RNA decay, and gene regulation.

Degradation of FinP antisense RNA from F-like plasmids: the RNA-binding protein, FinO, protects FinP from ribonuclease E

Transfer of F-like plasmids is regulated by the FinOP system, which controls the expression of traJ, a positive regulator of the transfer operon. F FinP is a 79 base antisense RNA, composed of two stem-loops, complementary to the 5' untranslated leader of traJ mRNA. Binding of FinP to the traJ leader sequesters the traJ ribosome binding site, preventing its translation and repressing plasmid transfer. The FinO protein binds stem-loop II of FinP and traJ mRNA and promotes duplex formation in vitro. FinO stabilizes FinP, increasing its effective concentration in vivo. To determine how FinO protects FinP from decay, the degradation of FinP was examined in a series of ribonuclease-deficient strains. Using Northern blot analysis, full-length FinP was found to be stabilized sevenfold in an RNase E-deficient strain. The major site of RNase E cleavage was mapped on synthetic FinP, to the single-stranded region between stem-loops I and II. A secondary site near the 5' end ( approximately 10 bases) was also observed. A GST-FinO fusion protein protected FinP from RNase E cleavage at both sites in vitro. Two duplexes between FinP and traJ mRNA were detected in an RNase III-deficient strain. The larger duplex resulted from extension of the FinP transcript at its 3' end, suggesting readthrough at the terminator that corresponds to FinP stem-loop II. A point mutant of finP (finP305; C30U) that is unable to repress traJ in the presence of FinO was also characterized. The pattern of RNase E digestion of finP305 RNA differed from FinP, and GST-FinO did not protect finP305 RNA from cleavage in vitro. The half-life of finP305 RNA decreased more than tenfold in vivo, such that the steady-state levels of finP305 RNA, in the presence of FinO, were insufficient to significantly reduce the level of traJ mRNA available for translation, allowing derepressed levels of transfer.

Degradation pathway of CopA, the antisense RNA that controls replication of plasmid R1

RNA decay in bacteria is carried out by a number of enzymes that participate in the coordinated degradation of their substrates. Endo- and exonucleolytic cleavages as well as polyadenylation are generally involved in determining the half-life of RNAs. Small, untranslated antisense RNAs are suitable model systems to study decay. A study of the pathway of degradation of CopA, the copy number regulator RNA of plasmid R1, is reported here. Strains carrying mutations in the genes encoding RNase E, polynucleotide phosphorylase (PNPase), RNase II and poly(A) polymerase I (PcnB/PAP I)--alone or in combination--were used to investigate degradation patterns and relative half-lives of CopA. The results obtained suggest that RNase E initiates CopA decay. Both PNPase and RNase II can degrade the major 3'-cleavage product generated by RNase E. This exonucleolytic degradation is aided by PcnB, which may imply a requirement for A-tailing. RNase II can partially protect CopA's 3'-end from PNPase-dependent degradation. Other RNases are probably involved in decay, since in rnb/pnp double mutants, decay still occurs, albeit at a reduced rate. Experiments using purified RNase E identified cleavage sites in CopA in the vicinity of, but not identical to, those mapped in vivo, suggesting that the cleavage site specificity of this RNase is modulated by additional proteins in the cell. A model of CopA decay is presented and discussed.

Replication and control of circular bacterial plasmids

An essential feature of bacterial plasmids is their ability to replicate as autonomous genetic elements in a controlled way within the host. Therefore, they can be used to explore the mechanisms involved in DNA replication and to analyze the different strategies that couple DNA replication to other critical events in the cell cycle. In this review, we focus on replication and its control in circular plasmids. Plasmid replication can be conveniently divided into three stages: initiation, elongation, and termination. The inability of DNA polymerases to initiate de novo replication makes necessary the independent generation of a primer. This is solved, in circular plasmids, by two main strategies: (i) opening of the strands followed by RNA priming (theta and strand displacement replication) or (ii) cleavage of one of the DNA strands to generate a 3'-OH end (rolling-circle replication). Initiation is catalyzed most frequently by one or a few plasmid-encoded initiation proteins that recognize plasmid-specific DNA sequences and determine the point from which replication starts (the origin of replication). In some cases, these proteins also participate directly in the generation of the primer. These initiators can also play the role of pilot proteins that guide the assembly of the host replisome at the plasmid origin. Elongation of plasmid replication is carried out basically by DNA polymerase III holoenzyme (and, in some cases, by DNA polymerase I at an early stage), with the participation of other host proteins that form the replisome. Termination of replication has specific requirements and implications for reinitiation, studies of which have started. The initiation stage plays an additional role: it is the stage at which mechanisms controlling replication operate. The objective of this control is to maintain a fixed concentration of plasmid molecules in a growing bacterial population (duplication of the plasmid pool paced with duplication of the bacterial population). The molecules involved directly in this control can be (i) RNA (antisense RNA), (ii) DNA sequences (iterons), or (iii) antisense RNA and proteins acting in concert. The control elements maintain an average frequency of one plasmid replication per plasmid copy per cell cycle and can "sense" and correct deviations from this average. Most of the current knowledge on plasmid replication and its control is based on the results of analyses performed with pure cultures under steady-state growth conditions. This knowledge sets important parameters needed to understand the maintenance of these genetic elements in mixed populations and under environmental conditions.

Regulation of ribonuclease III processing by double-helical sequence antideterminants

The double helix is a ubiquitous feature of RNA molecules and provides a target for nucleases involved in RNA maturation and decay. Escherichia coli ribonuclease III participates in maturation and decay pathways by site-specifically cleaving double-helical structures in cellular and viral RNAs. The site of cleavage can determine RNA functional activity and half-life and is specified in part by local tertiary structure elements such as internal loops. The involvement of base pair sequence in determining cleavage sites is unclear, because RNase III can efficiently degrade polymeric double-stranded RNAs of low sequence complexity. An alignment of RNase III substrates revealed an exclusion of specific Watson-Crick bp sequences at defined positions relative to the cleavage site. Inclusion of these "disfavored" sequences in a model substrate strongly inhibited cleavage in vitro by interfering with RNase III binding. Substrate cleavage also was inhibited by a 3-bp sequence from the selenocysteine-accepting tRNASec, which acts as an antideterminant of EF-Tu binding to tRNASec. The inhibitory bp sequences, together with local tertiary structure, can confer site specificity to cleavage of cellular and viral substrates without constraining the degradative action of RNase III on polymeric double-stranded RNA. Base pair antideterminants also may protect double-helical elements in other RNA molecules with essential functions.

Rescue of the RNA phage genome from RNase III cleavage

The secondary structure of the RNA from the single-stranded RNA bacteriophages, like MS2 and Qb, has evolved to serve a variety of functions such as controlling gene expression, exposing binding sites for the replicase and capsid proteins, allowing strand separation and so forth. On the other hand, all of these foldings have to perform in bacterial cells in which various RNA splitting enzymes are present. We therefore examined whether phage RNA structure is under selective pressure by host RNases. Here we show this to be true for RNase III. A fully double-stranded hairpin of 17 bp, which is an RNase III target, was inserted into a non-coding region of the MS2 RNA genome. In an RNase III-host these phages survived but in wild-type bacteria they did not. Here the stem underwent Darwinian evolution to a structure that was no longer a substrate for RNase III. This was achieved in three different ways: (i) the perfect stem was maintained but shortened by removing all or most of the insert; (ii) the stem acquired suppressor mutations that replaced Watson-Crick base pairs by mismatches; (iii) the stem acquired small deletions or insertions that created bulges. These insertions consist of short stretches of non-templated A or U residues. Their origin is ascribed to polyadenylation at the site of the RNase III cut (in the + or - strand) either by Escherichia coli poly(A) polymerase or by idling MS2 replicase.

Implications of RNA structure on the annealing of a potent antisense RNA directed against the human immunodeficiency virus type 1

Antisense RNA-mediated regulation in bacterial systems is related to the kinetics of RNA-RNA annealing in vitro. Here, we investigated the secondary structure of alphaY69, an effective HIV-directed antisense RNA in human cells. Purified RNA preparations contain a single conformer. The global structure was identified by a cleavage experiment under native conditions using a short complementary oligonucleotide and RNase H. Structural analyses indicate a three-domain structure of alphaY69 consisting of two stem-loop elements connected by a seven-nucleotide single-stranded hinge region. Kinetic data suggest that the formation of base pairs between a CGC triplet of alphaY69 and its target RNA is essential for fast annealing. The complementary sequence stretch of the target folds into a high-energy secondary structure. The relationship between modifications in structural elements of alphaY69 and the annealing kinetics suggested that rate-limiting steps of the annealing involve a single site of alphaY69 and do not involve its 5' or 3'-end. Further, the data indicate that both initial base-specific interactions and duplex formation are dependent on the CGC triplet of the central region of alphaY69. This mechanism represents a specific and efficient way of RNA-RNA annealing that is initiated by the interaction of unstructured RNA regions.

A two unit antisense RNA cassette test system for silencing of target genes

This communication describes a two unit antisense RNA cassette system for use in gene silencing. Cassettes consist of a recognition unit and an inhibitory unit which are transcribed into a single RNA that carries sequences of non-contiguous complementarity to the chosen target RNA. The recognition unit is designed as a stem-loop for rapid formation of long- lived binding intermediates with target sequences and resembles the major stem-loop of a naturally occurring antisense RNA, CopA. The inhibitory unit consists of either a sequence complementary to a ribosome binding site or of a hairpin ribozyme targeted at a site within the chosen mRNA. The contributions of the individual units to inhibition was assessed using the lacI gene as a target. All possible combinations of recognition and inhibitory units were tested in either orientation. In general, inhibition of lacI expression was relatively low. Fifty per cent inhibition was obtained with the most effective of the constructs, carrying the recognition stem-loop in the antisense orientation and the inhibitory unit with an anti-RBS sequence. Several experiments were performed to assess activities of the RNAs in vitro and in vivo : antisense RNA binding assays, cleavage assays, secondary structure analysis as well as Northern blotting and primer extension analysis of antisense and target RNAs. The problems associated with this antisense RNA approach as well as its potential are discussed with respect to possible optimization strategies.

The design of antisense RNA

Antisense nucleic acids comprise short-chain synthetic oligonucleotides, often oligodeoxyribonucleotides (ODN) of less than approximately 30 nucleotides and substantially longer sequences formed by ribonucleic acids (RNA). Both groups differ with respect to several properties, including their generation, the mode of delivery, and their structure-function relationship. Long-chain antisense RNA transcribed in vitro or endogenously from recombinant genes fold into three-dimensional structures. The pairing reaction with their complementary target strand occurs via largely unknown annealing mechanisms and, depending on the phylogenetic cellular background, in different cellular compartments. The annealing pathway is influenced by a variety of biologic and biochemical parameters that are as yet poorly understood. However, the basal biochemical mechanisms underlying the relationship between RNA structure and efficient annealing could allow one to derive more general rules for the design of in vivo effective antisense RNA in a way that is not dependent on specific cell types. Here, some of the criteria are discussed that are currently thought to have major impact on the design of long-chain antisense RNA.

Antisense RNA control of plasmid R1 replication. The dominant product of the antisense rna-mrna binding is not a full RNA duplex

The replication frequency of plasmid R1 is controlled by an antisense RNA (CopA) that binds to its target site (CopT) in the leader region of repA mRNA and inhibits the synthesis of the replication initiator protein RepA. Previous studies on CopA-CopT pairing in vitro revealed the existence of a primary loop-loop interaction (kissing complex) that is subsequently converted to an almost irreversible duplex. However, the structure of more stable binding intermediates that lead to the formation of a complete duplex was speculative. Here, we investigated the interaction between CopA and CopT by using Pb(II)-induced cleavages. The kissing complex was studied using a truncated antisense RNA (CopI) that is unable to form a full duplex with CopT. Furthermore, RNase III, which is known to process the CopA-CopT complex in vivo, was used to detect the existence of a full duplex. Our data indicate that the formation of a full CopA-CopT duplex appears to be a very slow process in vitro. Unexpectedly, we found that the loop-loop interaction persists in the predominant CopA-CopT complex and is stabilized by intermolecular base pairing involving the 5'-proximal 30 nucleotides of CopA and the complementary region of CopT. This almost irreversible complex suffices to inhibit ribosome binding at the tap ribosome binding site and may be the inhibitory complex in vivo.

Random removal of inserts from an RNA genome: selection against single-stranded RNA

We have monitored the evolution of insertions in two MS2 RNA regions of known secondary structure where coding pressure is negligible or absent. Base changes and shortening of the inserts proceed until the excessive nucleotides can be accommodated in the original structure. The stems of hairpins can be dramatically extended but the loops cannot, revealing natural selection against single-stranded RNA. The 3' end of the MS2 A-protein gene forms a small hairpin with an XbaI sequence in the loop. This site was used to insert XbaI fragments of various sizes. Phages produced by these MS2 cDNA clones were not wild type, nor had they retained the full insert. Instead, every revertant phage had trimmed the insert in a different way to leave a four- to seven-membered loop to the now extended stem. Similar results were obtained with inserts in the 5' untranslated region. The great number of different revertants obtained from a single starting mutant as well as sequence inspection of the crossover points suggest that the removal of redundant RNA occurs randomly. The only common feature among all revertants appears the potential to form a hairpin with a short loop, suggesting that single-stranded RNA negatively affects the viability of the phage. To test this hypothesis, we introduced XbaI fragments of 34 nucleotides that could form either a long stem with a small loop or a short stem with a large loop (26 nucleotides). The base-paired inserts were perfectly maintained for many generations, whereas the unpaired versions were quickly trimmed back to reduce the size of the loop. These data confirm that single-stranded RNA adversely affects phage fitness and is strongly selected against. The repair of the RNA genome that we describe here appears as the result of random recombination. Of the plethora of recombinants, only those able to adopt a base-paired structure survive. The frequency with which our inserts are removed seems higher than measured by others for small inserts in a reading frame in Q beta RNA. To account for this higher frequency, we suggest models in which the single-stranded nature of our inserts induces random recombination at the site of the insertion.

The secondary structure of guide RNA molecules from Trypanosoma brucei

RNA editing in kinetoplastid organisms is a mitochondrial RNA processing phenomenon that is characterized by the insertion and deletion of uridine nucleotides into incomplete mRNAs. Key molecules in the process are guide RNAs which direct the editing reaction by virtue of their primary sequences in an RNA-RNA interaction with the pre-edited mRNAs. To understand the molecular details of this reaction, especially potential RNA folding and unfolding processes as well as assembly phenomena with mitochondrial proteins, we analyzed the secondary structure of four different guide RNAs from Trypanosoma brucei at physiological conditions. By using structure-sensitive chemical and enzymatic probes in combination with spectroscopic techniques we found that the four molecules despite their different primary sequences, fold into similar structures consisting of two imperfect hairpin loops of low thermodynamic stability. The molecules melt in two-state monomolecular transitions with Tms between 33 and 39 degrees C and transition enthalpies of -32 to -38 kcal/mol. Both terminal ends of the RNAs are single-stranded with the 3' ends possibly adopting a single-stranded, helical conformation. Thus, it appears that the gRNA structures are fine tuned to minimize stability for an optimal annealing reaction to the pre-mRNAs while at the same time maximizing higher order structural features to permit the assembly with other mitochondrial components into the editing machinery.

Bulged-out nucleotides in an antisense RNA are required for rapid target RNA binding in vitro and inhibition in vivo

Naturally occurring antisense RNAs in prokaryotes are generally short, highly structured and untranslated. Stem-loops are always present, and loop regions serve as primary recognition structures in most cases. Single-stranded tails or internal unstructured regions are required for initiation of stable pairing between antisense and target RNA. Most antisense RNAs contain bulged-out nucleotides or small internal loops in upper stem regions. Here we investigated the role of the bulged-out nucleotides of CopA (the copy number regulator of plasmid R1) in determining the binding properties of this antisense RNA to its target in vitro and the efficiency of a translational inhibition in vivo. The introduction of perfect helicity in the region of the two bulges in CopA decreased pairing rate constants by up to 180-fold, increased equilibrium dissociation constants of the 'kissing intermediate' up to 14-fold, and severely impaired inhibition of repA expression. A previously described loop size mutant of CopA showed decreased pairing rates, but, in contrast to the bulge-less mutant CopAs, shows a decreased dissociation constant of the 'kissing complex'. We conclude that removal of the specific bulges/internal loops within the stem-loop II of CopA impairs the inhibitor, and that creation of an internal loop at a different position does not restore activity, emphasizing the optimal folding of wild-type CopA. The accompanying paper shows that an additional function of bulges can be protection from RNase III cleavage.