Mutational analysis of the regulatory region of the Mycobacterium plasmid pAL5000

Gene Transfer in Mycobacterium tuberculosis: Shuttle Phasmids to Enlightenment

Infectious diseases have plagued humankind throughout history and have posed serious public health problems. Yet vaccines have eradicated smallpox and antibiotics have drastically decreased the mortality rate of many infectious agents. These remarkable successes in the control of infections came from knowing the causative agents of the diseases, followed by serendipitous discoveries of attenuated viruses and antibiotics. The discovery of DNA as genetic material and the understanding of how this information translates into specific phenotypes have changed the paradigm for developing new vaccines, drugs, and diagnostic tests. Knowledge of the mechanisms of immunity and mechanisms of action of drugs has led to new vaccines and new antimicrobial agents. The key to the acquisition of the knowledge of these mechanisms has been identifying the elemental causes (i.e., genes and their products) that mediate immunity and drug resistance. The identification of these genes is made possible by being able to transfer the genes or mutated forms of the genes into causative agents or surrogate hosts. Such an approach was limited in Mycobacterium tuberculosis by the difficulty of transferring genes or alleles into M. tuberculosis or a suitable surrogate mycobacterial host. The construction of shuttle phasmids-chimeric molecules that replicate in Escherichia coli as plasmids and in mycobacteria as mycobacteriophages-was instrumental in developing gene transfer systems for M. tuberculosis. This review will discuss M. tuberculosis genetic systems and their impact on tuberculosis research.

Core genome and plasmidome of the quorum-quenching bacterium Rhodococcus erythropolis

Rhodococcus erythropolis is a worldwide-distributed actinobacterium that exhibits a remarkable metabolic versatility illustrated by its ability to degrade complex compounds, such as quorum-sensing signals N-acylhomoserine lactones (NAHLs), phenols, sterols and fuel derivatives. Because of its catabolic properties, R. erythropolis strains are proposed as anti-biofouling agents against NAHL-dependent biofilms, biocontrol agents against NAHL-emitting plant pathogens, and bioremediation agents in contaminated waters and soils. Here, we used the PacBio technology to resolve the complete genome sequence of the biocontrol strain R. erythropolis R138. Its genome consisted in a circular chromosome (6,236,862 bp), a linear plasmid pLRE138 (477,915 bp) and a circular plasmid pCRE138 (91,729 bp). In addition, draft genomes of five R. erythropolis strains were determined by Illumina technology and compared with the other five R. erythropolis genomes that are available in public databases: 5,825 common CDSs were present in all of the eleven analyzed genomes and represented up to 87 % of those identified in R. erythropolis R138. This study highlighted the high proportion of core-genome genes in R. erythropolis, but a high variability of the plasmid content. Key-metabolic pathways which are involved in the degradation of complex molecules, such as NAHLs and phenol, catechol and sterol derivatives are coded by the R. erythropolis core-genome.

Direct and inverted repeats elicit genetic instability by both exploiting and eluding DNA double-strand break repair systems in mycobacteria

Repetitive DNA sequences with the potential to form alternative DNA conformations, such as slipped structures and cruciforms, can induce genetic instability by promoting replication errors and by serving as a substrate for DNA repair proteins, which may lead to DNA double-strand breaks (DSBs). However, the contribution of each of the DSB repair pathways, homologous recombination (HR), non-homologous end-joining (NHEJ) and single-strand annealing (SSA), to this sort of genetic instability is not fully understood. Herein, we assessed the genome-wide distribution of repetitive DNA sequences in the Mycobacterium smegmatis, Mycobacterium tuberculosis and Escherichia coli genomes, and determined the types and frequencies of genetic instability induced by direct and inverted repeats, both in the presence and in the absence of HR, NHEJ, and SSA. All three genomes are strongly enriched in direct repeats and modestly enriched in inverted repeats. When using chromosomally integrated constructs in M. smegmatis, direct repeats induced the perfect deletion of their intervening sequences ~1,000-fold above background. Absence of HR further enhanced these perfect deletions, whereas absence of NHEJ or SSA had no influence, suggesting compromised replication fidelity. In contrast, inverted repeats induced perfect deletions only in the absence of SSA. Both direct and inverted repeats stimulated excision of the constructs from the attB integration sites independently of HR, NHEJ, or SSA. With episomal constructs, direct and inverted repeats triggered DNA instability by activating nucleolytic activity, and absence of the DSB repair pathways (in the order NHEJ>HR>SSA) exacerbated this instability. Thus, direct and inverted repeats may elicit genetic instability in mycobacteria by 1) directly interfering with replication fidelity, 2) stimulating the three main DSB repair pathways, and 3) enticing L5 site-specific recombination.

Evolutionary link between the mycobacterial plasmid pAL5000 replication protein RepB and the extracytoplasmic function family of σ factors

Mycobacterial plasmid pAL5000 represents a family of plasmids found mostly in the Actinobacteria. It replicates using two plasmid-encoded proteins, RepA and RepB. While BLAST searches indicate that RepA is a replicase family protein, the evolutionary connection of RepB cannot be established, as no significant homologous partner (E < 10(-3)) outside the RepB family can be identified. To obtain insight into the structure-function and evolutionary connections of RepB, an investigation was undertaken using homology modeling, phylogenetic, and mutational analysis methods. The results indicate that although they are synthesized from the same operon, the phylogenetic affinities of RepA and RepB differ. Thus, the operon may have evolved through random breaking and joining events. Homology modeling predicted the presence of a three-helical helix-turn-helix domain characteristic of region 4 of extracytoplasmic function (ECF) σ factors in the C-terminal region of RepB. At the N-terminal region, there is a helical stretch, which may be distantly related to region 3 of σ factors. Mutational analysis identified two arginines indispensable for RepB activity, one each located within the C- and N-terminal conserved regions. Apart from analyzing the domain organization of the protein, the significance of the presence of a highly conserved A/T-rich element within the RepB binding site was investigated. Mutational analysis revealed that although this motif does not bind RepB, its integrity is important for efficient DNA-protein interactions and replication to occur. The present investigation unravels the possibility that RepB-like proteins and their binding sites represent ancient DNA-protein interaction modules.

Promoter analysis of macrophage- and tick cell-specific differentially expressed Ehrlichia chaffeensis p28-Omp genes

BACKGROUND

Ehrlichia chaffeensis is a rickettsial agent responsible for an emerging tick-borne illness, human monocytic ehrlichiosis. Recently, we reported that E. chaffeensis protein expression is influenced by macrophage and tick cell environments. We also demonstrated that host response differs considerably for macrophage and tick cell-derived bacteria with delayed clearance of the pathogen originating from tick cells.

RESULTS

In this study, we mapped differences in the promoter regions of two genes of p28-Omp locus, genes 14 and 19, whose expression is influenced by macrophage and tick cell environments. Primer extension and quantitative RT-PCR analysis were performed to map transcription start sites and to demonstrate that E. chaffeensis regulates transcription in a host cell-specific manner. Promoter regions of genes 14 and 19 were evaluated to map differences in gene expression and to locate RNA polymerase binding sites.

CONCLUSION

RNA analysis and promoter deletion analysis aided in identifying differences in transcription, DNA sequences that influenced promoter activity and RNA polymerase binding regions. This is the first description of a transcriptional machinery of E. chaffeensis. In the absence of available genetic manipulation systems, the promoter analysis described in this study can serve as a novel molecular tool for mapping the molecular basis for gene expression differences in E. chaffeensis and other related pathogens belonging to the Anaplasmataceae family.

Creation and characterisation of a high-copy-number version of the pAL5000 mycobacterial replicon

The majority of mycobacterial plasmid vectors are derived from the pAL5000 replicon and maintained at approximately five copies per cell. We have devised a method that directly selects for high-copy-number plasmids. This involves enriching for high copy number plasmids by repeatedly isolating and retransforming plasmids from a mutant library. Using this method we have selected a copy-up version of the pAL5000 replicon. In Mycobacterium smegmatis the copy-number was shown to have increased 7-fold to between 32 and 64 copies/cell, and the plasmid remained relatively stable after 100 generations in the absence of antibiotic selection. The plasmid also has a high-copy-number phenotype in M. bovis BCG and can be used to increase expression of cloned genes, as we have demonstrated with the green fluorescent protein. The mutation was found to be the deletion of an alanine residue in the C-terminal end of the RepA replication protein. We argue that the mutation exerts its effect through altered RNA folding, thereby affecting the translationally coupled RepA-RepB expression.

DNA bending in the mycobacterial plasmid pAL5000 origin-RepB complex

Plasmid pAL5000 represents a family of relatively newly discovered cryptic plasmids in gram-positive Actinomycetes bacteria. The replication regions of these plasmids comprise a bicistronic operon, repA-repB, encoding two replication proteins. Located upstream is a cis-acting element that functions as the origin of replication. It comprises an approximately 200-bp segment spanning two binding sites for the replication protein RepB, a low-affinity (L) site and a high-affinity (H) site separated by an approximately 40-bp spacer sequence. The trajectory of the DNA in the RepB-origin complex has been investigated, and it has been found that the origin undergoes significant bending movements upon RepB binding. RepB binding not only led to local bending effects but also caused a long-range polar curvature which affected the DNA sequences 3' to the H site. These movements appear to be essential for the in-phase alignment of the L and H sites that leads to the formation of a looped structure. A novel property of RepB unearthed in this study is its ability to form multimers. This property may be an important factor that determines the overall trajectory of the DNA in the RepB-origin complex. The results presented in this study suggest that the origins of replication of pAL5000 and related plasmids are highly flexible and that multimeric, RepB-like initiator proteins bind the origin and induce local deformations and long-range curvatures which are probably necessary for the proper functioning of the origin.

Genetic alteration of Mycobacterium smegmatis to improve mycobacterium-mediated transfer of plasmid DNA into mammalian cells and DNA immunization

Mycobacteria target and persist within phagocytic monocytes and are strong adjuvants, making them attractive candidate vectors for DNA vaccines. We characterized the ability of mycobacteria to deliver transgenes to mammalian cells and the effects of various bacterial chromosomal mutations on the efficiency of transfer in vivo and in vitro. First, we observed green fluorescent protein expression via microscopy and fluorescence-activated cell sorting analysis after infection of phagocytic and nonphagocytic cell lines by Mycobacterium smegmatis or M. bovis BCG harboring a plasmid encoding the fluorescence gene under the control of a eukaryotic promoter. Next, we compared the efficiencies of gene transfer using M. smegmatis or BCG containing chromosomal insertions or deletions that cause early lysis, hyperconjugation, or an increased plasmid copy number. We observed a significant-albeit only 1.7-fold-increase in the level of plasmid transfer to eukaryotic cells infected with M. smegmatis hyperconjugation mutants. M. smegmatis strains that overexpressed replication proteins (Rep) of pAL5000, a plasmid whose replicon is incorporated in many mycobacterial constructs, generated a 10-fold increase in plasmid copy number and 3.5-fold and 3-fold increases in gene transfer efficiency to HeLa cells and J774 cells, respectively. Although BCG strains overexpressing Rep could not be recovered, BCG harboring a plasmid with a copy-up mutation in oriM resulted in a threefold increase in gene transfer to J774 cells. Moreover, M. smegmatis strains overexpressing Rep enhanced gene transfer in vivo compared with a wild-type control. Immunization of mice with mycobacteria harboring a plasmid (pgp120(h)(E)) encoding human immunodeficiency virus gp120 elicited gp120-specific CD8 T-cell responses among splenocytes and peripheral blood mononuclear cells that were up to twofold (P < 0.05) and threefold (P < 0.001) higher, respectively, in strains supporting higher copy numbers. The magnitude of these responses was approximately one-half of that observed after intramuscular immunization with pgp120(h)(E). M. smegmatis and other nonpathogenic mycobacteria are promising candidate vectors for DNA vaccine delivery.

Sequence analysis of three plasmids harboured in Rhodococcus erythropolis strain PR4

Rhodococcus erythropolis strain PR4 has been isolated as an alkane-degrading bacterium. The strain harbours one linear plasmid, pREL1 (271 577 bp) and two circular plasmids, pREC1 (104 014 bp) and pREC2 (3637 bp), all with some sequence similarities to other Rhodococcus plasmids. For pREL1, pREC1 and pREC2, 298, 102 and 3 open reading frames, respectively, were predicted. Linear plasmid pREL1 has several regions homologous to plasmid pBD2 found in R. erythropolis BD2. Sequence analysis of pREL1 and pBD2 identified common metal-resistance genes on both, but pREL1 also encodes alkane-degradation genes not found on pBD2, with enzyme constituents some of which are quite different from those of other organisms. The alkane hydroxylase consisted of a cytochrome P450 monooxygenase, a 2Fe-2S ferredoxin, and a ferredoxin reductase. The ferredoxin reductase amino acid sequence resembles the AlkT (rubredoxin reductase) sequence. A zinc-containing alcohol dehydrogenase further oxydizes alkanols, alkane oxidation products catalysed by alkane hydroxylase. Of the circular plasmids, the pREC1 sequence is partially similar to the sequence of pREAT701, the virulence plasmid found in Rhodococcus equi. pREC1 has no pREAT701 virulence genes and encodes genes for beta-oxidation of fatty acids. Thus, joint actions of enzymes encoded by pREL1 and pREC1 may enable efficient mineralization of alkanes.

pB264, a small, mobilizable, temperature sensitive plasmid from Rhodococcus

BACKGROUND

Gram-positive bacteria of the genus Rhodococcus have shown an extraordinary capacity for metabolizing recalcitrant organic compounds. One hindrance to the full exploitation of Rhodococcus is the dearth of genetic tools available for strain manipulation. To address this issue, we sought to develop a plasmid-based system for genetic manipulation of a variety of Rhodococcus strains.

RESULTS

We isolated and sequenced pB264, a 4,970 bp cryptic plasmid from Rhodococcus sp. B264-1 with features of a theta-type replication mechanism. pB264 was nearly identical to pKA22, a previously sequenced but uncharacterized cryptic plasmid. Derivatives of pB264 replicate in a diverse range of Rhodococcus species, showing that this plasmid does not bear the same host range restrictions that have been exhibited by other theta replicating plasmids. Replication or maintenance of pB264 is inhibited at 37 degrees C, making pB264 useful as a suicide vector for genetic manipulation of Rhodococcus. A series of deletions revealed that ca. 1.3 kb from pB264 was sufficient to support replication and stable inheritance of the plasmid. This region includes two open reading frames that encode functions (RepAB) that can support replication of pB264 derivatives in trans. Rhodococcus sp. B264-1 will mobilize pB264 into other Rhodococcus species via conjugation, making it possible to genetically modify bacterial strains that are otherwise difficult to transform. The cis-acting element (oriT) required for conjugal transfer of pB264 resides within a ca. 0.7 kb region that is distinct from the regions responsible for replication.

CONCLUSION

Shuttle vectors derived from pB264 will be useful for genetic studies and strain improvement in Rhodococcus, and will also be useful for studying the processes of theta replication and conjugal transfer among actinomycetes.

Translational coupling to an upstream gene promotes folding of the mycobacterial plasmid pAL5000 replication protein RepB and thereby its origin binding activity

In the mycobacterial plasmid pAL5000 replication region, the replication genes repA and repB are organized in an operon. Earlier, a RepB-dependent origin binding activity was detected in Escherichia coli cells expressing the repA-repB operon. This activity was maximal when expression of the two genes was coupled (A. Basu, M. Chawla-Sarkar, S. Chakrabarti, and S. K. Das Gupta, J. Bacteriol. 184:2204-2214, 2002). In this study we have shown that translational coupling makes a significant difference in the structure and function of RepB. When repB expression was coupled to repA, the polypeptide folded into an active structure (referred to as RepB*), which possessed higher helical content than RepB expressed independently. RepB* could also be distinguished from the less active RepB on the basis of sensitivity to OmpT, an outer membrane protease of E. coli: RepB* was sensitive to the protease, whereas RepB was resistant. Similar conformational differences between RepB* and RepB could be observed when repA was replaced with an unrelated gene, malE (encoding maltose binding protein). These results show that translational coupling of repB to an upstream gene is necessary for better folding and origin binding activity. It is speculated that in coupled systems where translation machinery is passed on from the upstream to the downstream open reading frame, cotranslational folding of the polypeptide expressed from the downstream open reading frame is enhanced due to increased folding competence of translationally primed ribosomes.

Origin binding activity of the Mycobacterial plasmid pAL5000 replication protein RepB is stimulated through interactions with host factors and coupled expression of repA

The minimal replication region of the mycobacterial plasmid pAL5000 encompasses the replication origin (ori) and two tandemly organized replication genes, repA and repB, the functions of which are not clearly known. It was observed that when the repA and repB genes were expressed in Escherichia coli, a strong ori binding activity was generated in the host cells. Inactivation of repB led to a complete loss of activity, whereas inactivation of repA had a partial effect, indicating that while repB plays an important role in the process, its activity is stimulated through coexpression of repA. However, this stimulatory effect could be demonstrated only when expression of repA and that of repB were coupled. At a relatively high concentration (1,000 nM), the purified RepB protein was found to form an ori complex with low specificity, which was sensitive to high salt concentrations and challenge by a nonspecific competitor. In contrast, the complex formed by an extract of repA-repB-expressing cells was highly specific and was resistant to both types of challenges. At a 10-fold-lower concentration, RepB did not exhibit ori binding activity, but it could nevertheless form a salt-resistant ori complex in vitro, provided that host factors were present. Antibody supershift experiments indicated that RepB is a key component of the specific complex formed by extracts prepared from E. coli cells expressing the repA and repB genes and also from mycobacterial cells harboring pAL5000-derived vectors. The results indicate that in vivo RepB interacts with host factors and forms an ori complex, but this activity is maximal only when there is coupled expression of repA.

A new single-copy mycobacterial plasmid, pMF1, from Mycobacterium fortuitum which is compatible with the pAL5000 replicon

A 9.2 kb cryptic Mycobacterium fortuitum plasmid, pMF1, was isolated from strain 110 and its restriction map constructed. A 4.2 kb HindIII fragment of pMF1 was found to support replication in mycobacteria and this fragment was cloned and sequenced to characterize the replication elements of the plasmid. Computer analysis identified a putative Rep protein (362 amino acids) with high homology to the putative Rep protein of the Mycobacterium celatum plasmid pCLP and limited homology, mostly in the N-terminal region, to the Rep proteins of Mycobacterium avium pLR7, M. fortuitum pJAZ38 and Mycobacterium scrofulaceum pMSC262. A region containing a putative ori site was located upstream of the rep gene; this region displayed high homology at the nucleotide level with the predicted ori of pCLP and pJAZ38. A plasmid carrying the 4.2 kb HindIII fragment and a kanamycin resistance marker, designated pBP4, was maintained as a single-copy plasmid in Mycobacterium smegmatis and was stably inherited in the absence of antibiotic selection. Plasmid pBP4 was incompatible with the pJAZ38 replicon but was compatible with the widely used pAL5000 replicon, indicating that among the mycobacterial vectors now available there are two incompatibility groups. Significantly, the plasmid was able to replicate in the pathogen Mycobacterium tuberculosis, making it a useful tool for gene expression studies. To provide a choice of restriction sites and easy manipulation, a 2.1 kb fragment containing the minimal replication region was cloned to make the mycobacterial shuttle vector pBP10, which showed similar stability to pBP4.

Mycobacteria: bugs and bugbears (two steps forward and one step back)

The use of molecular techniques to study the mycobacteria has advanced greatly since the first genomic libraries of Mycobacterium tuberculosis and M. leprae were constructed in 1985. However, there are still pitfalls for the unwary. Most of the problems associated with the use of molecular techniques to study mycobacteria can be related to one of the following problems: slow growth rate causing problems with contamination; the formation of macroscopic clumps when grown in culture; resistance to standard chemical lysis procedures; the requirement for containment facilities for pathogenic species; the lack of suitable genetic vectors; and the problems of spontaneous antibiotic resistance. Despite these problems, considerable progress has been made and standard techniques have been developed for the preparation of protein, nucleic acids (DNA and RNA) and cell wall components, chemical and transposon mutagenesis and gene replacement methods, the use of reporter genes and expression vectors, and improved detection and drug sensitivity testing.

Identification of promoter elements in mycobacteria: mutational analysis of a highly symmetric dual promoter directing the expression of replication genes of the Mycobacterium plasmid pAL5000

The 120 bp origin of replication (ori) for the Mycobacterium plasmid pAL5000 has been shown to comprise the binding sites for the replication protein RepB as well as the start site of transcription for the repA and repB genes, encoding the replication proteins RepA and RepB. In this work it is demonstrated that a third gene product, Rap, is involved in replication in addition to the previously described proteins. Mycobacterium smegmatis cells transformed with replicons carrying the rap gene recover markedly faster upon electroporation than those transformed with the minimal replicon, which lacks rap. The rap gene, oppositely orientated to repA/B, was shown to be transcribed from a promoter orientated back-to-back to and overlapping the repA/B promoter. As a consequence of the extensive dyad symmetry in this region the two promoters share several elements, most of which are situated inside the high-affinity RepB-binding motif in the ori. Transcription of rap runs through the low-affinity RepB-binding site, which is part of the ori and necessary for replication. Both promoters were shown to be repressed by RepB. These divergent promoters were studied through site-specific mutagenesis in a xylE reporter gene assay. The analysis furnished evidence supporting the existence of a distal as well as a proximal element in mycobacterial promoters.