Simple and rapid preparation of plasmid template by a filtration method using microtiter filter plates

Advances in host and vector development for the production of plasmid DNA vaccines

Recent developments in DNA vaccine research provide a new momentum for this rather young and potentially disruptive technology. Gene-based vaccines are capable of eliciting protective immunity in humans to persistent intracellular pathogens, such as HIV, malaria, and tuberculosis, for which the conventional vaccine technologies have failed so far. The recent identification and characterization of genes coding for tumor antigens has stimulated the development of DNA-based antigen-specific cancer vaccines. Although most academic researchers consider the production of reasonable amounts of plasmid DNA (pDNA) for immunological studies relatively easy to solve, problems often arise during this first phase of production. In this chapter we review the current state of the art of pDNA production at small (shake flasks) and mid-scales (lab-scale bioreactor fermentations) and address new trends in vector design and strain engineering. We will guide the reader through the different stages of process design starting from choosing the most appropriate plasmid backbone, choosing the right Escherichia coli (E. coli) strain for production, and cultivation media and scale-up issues. In addition, we will address some points concerning the safety and potency of the produced plasmids, with special focus on producing antibiotic resistance-free plasmids. The main goal of this chapter is to make immunologists aware of the fact that production of the pDNA vaccine has to be performed with as much as attention and care as the rest of their research.

The RNA continent

Recent progress in the analyses of the mouse transcriptome leads to unexpected discoveries. The mouse genomic sequences read by RNA polymerase II may be six times more than previously expected for human chromosomes. The transcript-abundant regions (named "transcription forests") occupy more than half of the genomic sequence and are divided by transcript-scarce regions (transcription deserts). Many of the coding mRNAs may have partially overlapping antisense RNAs. There are transcripts bridging several adjacent genes that were previously regarded as distinct ones. The transcription start sites appearing as cap analysis of gene expression (CAGE) tags are mapped on the mouse genomic sequences. Distributions of CAGE tags show that the shapes of mammalian gene promoters can be classified into four major categories. These shapes were conserved between mouse and human. Most of the gene has exonic transcription start sites, especially in the 3' untranslated region (3' UTR) sequences. The term "RNA continent" has been invented to express this unexpectedly complex and prodigious mouse transcriptome. More than a half of the RNA polymerase II transcripts are regarded as noncoding RNAs (ncRNAs). The great variety of ncRNAs in mammalian transcriptome implies that there are many functional ncRNAs in the cells. Especially, the evolutionarily conserved microRNAs play critical roles in mammalian development and other biological functions. Moreover, many other ncRNAs have also been shown to have biological significant functions, mainly in the regulation of gene expression. The functional survey of the RNA continent has just started. We will describe the state of the art of the RNA continent and its impact on the modern molecular biology, especially on the cancer research.

A high-throughput, low-cost method for the preparation of "sequencing-ready" phage DNA template

We have developed a simple and efficient protocol for the isolation of good-quality recombinant phage DNA useful for all downstream processing, including automated sequencing. The overnight-grown phage particles were effectively precipitated (without any contaminating Escherichia coli DNA and other culture media components) by adjusting the pH of the culture medium to 5.2 with sodium acetate, followed by addition of ethanol to 25%. The phage DNA was selectively precipitated with ethanol in the presence of guanidinium thiocyanate under alkaline pH, resulting in uniform quality and quantity of phage DNA. The quality of the phage DNA preparation was demonstrated by DNA sequencing that provided an average read length of >700 bases (PHRED20 quality). This protocol for plating, picking, growing, and subsequent DNA purification of individual phage clones can be completely automated using any standard robotic platform. This protocol does not require any commercial kits and can be completed within 2h.

Dynamic transcriptome of mice

Life science in the 21st century is developing rapidly through the structural analysis of biomolecules, the completion of the human genome sequence and the analysis of transcriptomes. The mouse transcriptome has been comprehensively analyzed using a gene discovery approach to collect full-length cDNA (FL-cDNA) clones. The framework of the transcriptome was then mapped out by an international Functional ANnoTation Of Mouse cDNA (FANTOM) effort, and a significant new population of noncoding transcripts was discovered. The geographical analogy of a second "RNA continent," separate from the "continent" of expressed proteins, aids the visualization of this concept. An unexpected number of variations was discovered in the mouse transcriptome. The animal transcriptome has evolved to produce several transcripts and proteins from a single "transcriptional unit". Transcriptome analysis has given rise to the FL-cDNA database and to the 60 770 FANTOM FL-cDNA clone set, and the DNABook was developed as an easier way to distribute these clones. In conjunction with genome sequence databases, transcriptome databases and clone banks will be platforms for developing advanced databases of gene function (e.g. the Genome Function Database). This will enable life science to make rapid progress towards understanding life as a system of molecules.

The Riken mouse genome encyclopedia project

The Riken mouse genome encyclopedia a comprehensive full-length cDNA collection and sequence database. High-level functional annotation is based on sequence homology search, expression profiling, mapping and protein-protein interactions. More than 1000000 clones prepared from 163 tissues were end-sequenced and classified into 128000 clusters, and 60000 representative clones were fully sequenced representing 24000 clear protein-encoding genes. The application of the mouse genome database for positional cloning and gene network regulation analysis is reported.

Mapping of 19032 mouse cDNAs on mouse chromosomes

Finding genes by the positional candidate approach requires abundant cDNAs mapped to chromosomes. To provide such important information, we computationally mapped 19032 of our mouse cDNAs to mouse chromosomes by using data from public databases. We used 2 approaches. In the first, we integrated the mapping data of cDNAs on the human genome, known gene-related data, and comparative mapping data. From this, we calculated map positions on the mouse chromosomes. For this first approach, we developed a simple and powerful criterion to choose the correct map position from candidate positions in sequence homology searches. In the second approach, we related cDNAs to expressed sequence tags (EST) previously mapped in radiation hybrid experiments. We discuss improving the mapping by combining the 2 methods.

Targeting a complex transcriptome: the construction of the mouse full-length cDNA encyclopedia

We report the construction of the mouse full-length cDNA encyclopedia,the most extensive view of a complex transcriptome,on the basis of preparing and sequencing 246 libraries. Before cloning,cDNAs were enriched in full-length by Cap-Trapper,and in most cases,aggressively subtracted/normalized. We have produced 1,442,236 successful 3'-end sequences clustered into 171,144 groups, from which 60,770 clones were fully sequenced cDNAs annotated in the FANTOM-2 annotation. We have also produced 547,149 5' end reads,which clustered into 124,258 groups. Altogether, these cDNAs were further grouped in 70,000 transcriptional units (TU),which represent the best coverage of a transcriptome so far. By monitoring the extent of normalization/subtraction, we define the tentative equivalent coverage (TEC),which was estimated to be equivalent to >12,000,000 ESTs derived from standard libraries. High coverage explains discrepancies between the very large numbers of clusters (and TUs) of this project,which also include non-protein-coding RNAs,and the lower gene number estimation of genome annotations. Altogether,5'-end clusters identify regions that are potential promoters for 8637 known genes and 5'-end clusters suggest the presence of almost 63,000 transcriptional starting points. An estimate of the frequency of polyadenylation signals suggests that at least half of the singletons in the EST set represent real mRNAs. Clones accounting for about half of the predicted TUs await further sequencing. The continued high-discovery rate suggests that the task of transcriptome discovery is not yet complete.

Removal of RNA impurities by tangential flow filtration in an RNase-free plasmid DNA purification process

Addition of animal-derived ribonuclease A to degrade RNA impurities is not recommended in the manufacture of pharmaceutical-grade plasmid DNA. Tangential flow filtration (TFF) takes advantage of the significant size difference between RNA and plasmid DNA to remove RNA in the permeate while plasmid remains in the retentate, in an RNase-free plasmid purification process. Operating conditions including transmembrane pressure, membrane pore size, conductivity of the diafiltration buffer, and plasmid load on the membrane were investigated to maximize RNA clearance. Although direct TFF of clarified lysate removed substantial amounts of RNA, the RNA levels left in the retentate were still significant. Calcium chloride is a potent precipitant of high-molecular-weight RNA. The addition of calcium chloride to the clarified lysate combined with the clearance of low-molecular-weight RNA by TFF resulted in complete RNA removal and high plasmid recovery.

RIKEN mouse genome encyclopedia

We have been working to establish the comprehensive mouse full-length cDNA collection and sequence database to cover as many genes as we can, named Riken mouse genome encyclopedia. Recently we are constructing higher-level annotation (Functional ANnoTation Of Mouse cDNA; FANTOM) not only with homology search based annotation but also with expression data profile, mapping information and protein-protein database. More than 1,000,000 clones prepared from 163 tissues were end-sequenced to classify into 159,789 clusters and 60,770 representative clones were fully sequenced. As a conclusion, the 60,770 sequences contained 33,409 unique. The next generation of life science is clearly based on all of the genome information and resources. Based on our cDNA clones we developed the additional system to explore gene function. We developed cDNA microarray system to print all of these cDNA clones, protein-protein interaction screening system, protein-DNA interaction screening system and so on. The integrated database of all the information is very useful not only for analysis of gene transcriptional network and for the connection of gene to phenotype to facilitate positional candidate approach. In this talk, the prospect of the application of these genome resourced should be discussed. More information is available at the web page: http://genome.gsc.riken.go.jp/.

Glass bead purification of plasmid template DNA for high throughput sequencing of mammalian genomes

To meet the new challenge of generating the draft sequences of mammalian genomes, we describe the development of a novel high throughput 96-well method for the purification of plasmid DNA template using size-fractionated, acid-washed glass beads. Unlike most previously described approaches, the current method has been designed and optimized to facilitate the direct binding of alcohol-precipitated plasmid DNA to glass beads from alkaline lysed bacterial cells containing the insoluble cellular aggregate material. Eliminating the tedious step of separating the cleared lysate significantly simplifies the method and improves throughput and reliability. During a 4 month period of 96-capillary DNA sequencing of the Rattus norvegicus genome at the Baylor College of Medicine Human Genome Sequencing Center, the average success rate and read length derived from >1 800 000 plasmid DNA templates prepared by the direct lysis/glass bead method were 82.2% and 516 bases, respectively. The cost of this direct lysis/glass bead method in September 2001 was approximately 10 cents per clone, which is a significant cost saving in high throughput genomic sequencing efforts.

The Y chromosome in the liverwort Marchantia polymorpha has accumulated unique repeat sequences harboring a male-specific gene

The haploid liverwort Marchantia polymorpha has heteromorphic sex chromosomes, an X chromosome in the female and a Y chromosome in the male. We here report on the repetitive structure of the liverwort Y chromosome through the analysis of male-specific P1-derived artificial chromosome (PAC) clones, pMM4G7 and pMM23-130F12. Several chromosome-specific sequence elements of approximately 70 to 400 nt are combined into larger arrangements, which in turn are assembled into extensive Y chromosome-specific stretches. These repeat sequences contribute 2-3 Mb to the Y chromosome based on the observations of three different approaches: fluorescence in situ hybridization, dot blot hybridization, and the frequency of clones containing the repeat sequences in the genomic library. A novel Y chromosome-specific gene family was found embedded among these repeat sequences. This gene family encodes a putative protein with a RING finger motif and is expressed specifically in male sexual organs. To our knowledge, there have been no other reports for an active Y chromosome-specific gene in plants. The chromosome-specific repeat sequences possibly contribute to determining the identity of the Y chromosome in M. polymorpha as well as to maintaining genes required for male functions, as in mammals such as human.

Automation and robotics for genetic analysis

This guide to laboratory robotics covers a wide variety of methods amenable to automation including mapping, genotyping, barcoding and data handling, template preparation, reaction setup, colony and plaque picking, and more.

RIKEN integrated sequence analysis (RISA) system--384-format sequencing pipeline with 384 multicapillary sequencer

The RIKEN high-throughput 384-format sequencing pipeline (RISA system) including a 384-multicapillary sequencer (the so-called RISA sequencer) was developed for the RIKEN mouse encyclopedia project. The RISA system consists of colony picking, template preparation, sequencing reaction, and the sequencing process. A novel high-throughput 384-format capillary sequencer system (RISA sequencer system) was developed for the sequencing process. This system consists of a 384-multicapillary auto sequencer (RISA sequencer), a 384-multicapillary array assembler (CAS), and a 384-multicapillary casting device. The RISA sequencer can simultaneously analyze 384 independent sequencing products. The optical system is a scanning system chosen after careful comparison with an image detection system for the simultaneous detection of the 384-capillary array. This scanning system can be used with any fluorescent-labeled sequencing reaction (chain termination reaction), including transcriptional sequencing based on RNA polymerase, which was originally developed by us, and cycle sequencing based on thermostable DNA polymerase. For long-read sequencing, 380 out of 384 sequences (99.2%) were successfully analyzed and the average read length, with more than 99% accuracy, was 654.4 bp. A single RISA sequencer can analyze 216 kb with >99% accuracy in 2.7 h (90 kb/h). For short-read sequencing to cluster the 3' end and 5' end sequencing by reading 350 bp, 384 samples can be analyzed in 1.5 h. We have also developed a RISA inoculator, RISA filtrator and densitometer, RISA plasmid preparator which can handle throughput of 40,000 samples in 17.5 h, and a high-throughput RISA thermal cycler which has four 384-well sites. The combination of these technologies allowed us to construct the RISA system consisting of 16 RISA sequencers, which can process 50,000 DNA samples per day. One haploid genome shotgun sequence of a higher organism, such as human, mouse, rat, domestic animals, and plants, can be revealed by seven RISA systems within one month.

Normalization and subtraction of cap-trapper-selected cDNAs to prepare full-length cDNA libraries for rapid discovery of new genes

In the effort to prepare the mouse full-length cDNA encyclopedia, we previously developed several techniques to prepare and select full-length cDNAs. To increase the number of different cDNAs, we introduce here a strategy to prepare normalized and subtracted cDNA libraries in a single step. The method is based on hybridization of the first-strand, full-length cDNA with several RNA drivers, including starting mRNA as the normalizing driver and run-off transcripts from minilibraries containing highly expressed genes, rearrayed clones, and previously sequenced cDNAs as subtracting drivers. Our method keeps the proportion of full-length cDNAs in the subtracted/normalized library high. Moreover, our method dramatically enhances the discovery of new genes as compared to results obtained by using standard, full-length cDNA libraries. This procedure can be extended to the preparation of full-length cDNA encyclopedias from other organisms.

Automation for genomics, part one: preparation for sequencing

In the past four years, automation for genomics has enabled a 43-fold increase in the total finished human genomic sequence in the world. This two-part noncomprehensive review will provide an overview of different types of automation equipment used in genome sequencing. Part One focuses on equipment involved in DNA preparation, DNA sequencing reactions, and other automated procedures for preparing DNA for running on sequencers or subsequent analysis; it also includes information on the development of these machines at various genome centers. Part Two, to be published in the next issue, will cover sequencing machinery and array technology, and conclude with a look at the future technologies that will revolutionize molecular biology. "Alternate" sequencing technologies (including mass spectrometry, biochips, and single-molecule analysis) will also be examined.

Purification of plasmid DNA by tangential flow filtration

A simple, scalable method for purification of plasmid DNA is described. The method includes modification of the classical alkaline-lysis-based plasmid extraction method by extending the solubilization step from less than 30 min to 24 h. The extraction is followed by the novel use of tangential flow filtration (TFF) for purification of the remaining contaminants. The method does not include the use of any organic solvents, RNase, high-speed centrifugation, or column chromatography steps. The method typically yields 15 to 20 mg of plasmid DNA per liter of bacterial culture and results in removal of >99% of RNA and >95% of the protein that remains after the modified alkaline lysis procedure. The procedure has been demonstrated to be effective in the isolation of seven different plasmids. Plasmids isolated using this method had comparable transfection capability relative to plasmid isolated using a classical, cesium chloride gradient-based method.

Automated filtration-based high-throughput plasmid preparation system

Current methods of plasmid preparation do not allow for large capacity automated processing. We have developed an automated high-throughput system that prepares plasmid DNA for large-scale sequencing. This system is based on our previously reported filtration method. In this method, cell harvesting, alkaline lysis, and plasmid purification occur in a single 96-well microtiter plate from which sequence-ready DNA samples are collected. The plates are designed to allow all reagents to be injected from above the wells and the spent reagents to be aspirated from below. This design has enabled us to build a linear process plasmid preparation system consisting of an automated filter plate stacker and a 21-stage automated plasmid preparator. The 96-well plates used are outfitted with glass-filters that trap Escherichia coli before the plates are stacked in the automated stacker. The plates move from the stacker to each of the 21 stages of the preparator. At specific stages, various reagents or chemicals are injected into the wells from above. Finally, the plates are collected in the second stacker. The optimal throughput of the preparator is 40,000 samples in 17.5 hr. Here, we describe a pilot experiment preparing 15,360 templates in 160 specially designed 96-well glass-filter plates. The prepared plasmids were subjected to restriction digestion, DNA sequencing, and transcriptional sequencing.

Automated Filtration-Based High-Throughput Plasmid Preparation System

Current methods of plasmid preparation do not allow for large capacity automated processing. We have developed an automated high-throughput system that prepares plasmid DNA for large-scale sequencing. This system is based on our previously reported filtration method. In this method, cell harvesting, alkaline lysis, and plasmid purification occur in a single 96-well microtiter plate from which sequence-ready DNA samples are collected. The plates are designed to allow all reagents to be injected from above the wells and the spent reagents to be aspirated from below. This design has enabled us to build a linear process plasmid preparation system consisting of an automated filter plate stacker and a 21-stage automated plasmid preparator. The 96-well plates used are outfitted with glass-filters that trap Escherichia coli before the plates are stacked in the automated stacker. The plates move from the stacker to each of the 21 stages of the preparator. At specific stages, various reagents or chemicals are injected into the wells from above. Finally, the plates are collected in the second stacker. The optimal throughput of the preparator is 40,000 samples in 17.5 hr. Here, we describe a pilot experiment preparing 15,360 templates in 160 specially designed 96-well glass-filter plates. The prepared plasmids were subjected to restriction digestion, DNA sequencing, and transcriptional sequencing.

An efficient, automatable template preparation for high throughput sequencing

We have developed a 96-well format for DNA template isolation that can be readily automatable. The template isolation protocol involves simple alkaline lysis chemistry and reversible capture on a silica solid phase. After the cells are lysed, no centrifugation is necessary, as lysate purification, DNA binding, washing, and release occur in 96-well filter plates. Large numbers of templates prepared using the silica purification method have been sequenced and analyzed. The quality of sequence resulting from our method has been compared with that generated from several commercial plasmid preparation protocols. We found sequence quality of the silica bead preparations to be equivalent to or, in some cases, better than those prepared by other methods. This method offers many advantages over other protocols we have used. First, the silica purifications have allowed us to more than double overall laboratory throughput while decreasing our template isolation materials cost at least five-fold. Second, because we have eliminated all centrifugation steps in the protocol, automation has been much simpler. The protocol has also been adapted to purify PCR products for use as templates in subsequent sequencing reactions.