Modeling of DNA local parameters predicts encrypted architectural motifs in Xenopus laevis ribosomal gene promoter

DNA binding preferences of S. cerevisiae RNA polymerase I Core Factor reveal a preference for the GC-minor groove and a conserved binding mechanism

In Saccharomyces cerevisiae, Core Factor (CF) is a key evolutionarily conserved transcription initiation factor that helps recruit RNA polymerase I (Pol I) to the ribosomal DNA (rDNA) promoter. Upregulated Pol I transcription has been linked to many cancers, and targeting Pol I is an attractive and emerging anti-cancer strategy. Using yeast as a model system, we characterized how CF binds to the Pol I promoter by electrophoretic mobility shift assays (EMSA). Synthetic DNA competitors along with anti-tumor drugs and nucleic acid stains that act as DNA groove blockers were used to discover the binding preference of yeast CF. Our results show that CF employs a unique binding mechanism where it prefers the GC-rich minor groove within the rDNA promoter. In addition, we show that yeast CF is able to bind to the human rDNA promoter sequence that is divergent in DNA sequence and demonstrate CF sensitivity to the human specific Pol I inhibitor, CX-5461. Finally, we show that the human Core Promoter Element (CPE) can functionally replace the yeast Core Element (CE) in vivo when aligned by conserved DNA structural features rather than DNA sequence. Together, these findings suggest that the yeast CF and the human ortholog Selectivity Factor 1 (SL1) use an evolutionarily conserved, structure-based mechanism to target DNA. Their shared mechanism may offer a new avenue in using yeast to explore current and future Pol I anti-cancer compounds.

Conserved Curvature of RNA Polymerase I Core Promoter Beyond rRNA Genes: The Case of the Tritryps

In trypanosomatids, the RNA polymerase I (RNAPI)-dependent promoters controlling the ribosomal RNA (rRNA) genes have been well identified. Although the RNAPI transcription machinery recognizes the DNA conformation instead of the DNA sequence of promoters, no conformational study has been reported for these promoters. Here we present the in silico analysis of the intrinsic DNA curvature of the rRNA gene core promoters in Trypanosoma brucei, Trypanosoma cruzi, and Leishmania major. We found that, in spite of the absence of sequence conservation, these promoters hold conformational properties similar to other eukaryotic rRNA promoters. Our results also indicated that the intrinsic DNA curvature pattern is conserved within the Leishmania genus and also among strains of T. cruzi and T. brucei. Furthermore, we analyzed the impact of point mutations on the intrinsic curvature and their impact on the promoter activity. Furthermore, we found that the core promoters of protein-coding genes transcribed by RNAPI in T. brucei show the same conserved conformational characteristics. Overall, our results indicate that DNA intrinsic curvature of the rRNA gene core promoters is conserved in these ancient eukaryotes and such conserved curvature might be a requirement of RNAPI machinery for transcription of not only rRNA genes but also protein-coding genes.

Intrinsic bent DNA sites in the chromosomal replication origin of Xylella fastidiosa 9a5c

The features of the nucleotide sequences in both replication and promoter regions have been investigated in many organisms. Intrinsically bent DNA sites associated with transcription have been described in several prokaryotic organisms. The aim of the present study was to investigate intrinsic bent DNA sites in the segment that holds the chromosomal replication origin, oriC, of Xylella fastidiosa 9a5c. Electrophoretic behavior analyses, as well as in silico analyses of both the 2-D projection and helical parameters, were performed. The chromosomal segment analyzed contains the initial sequence of the rpmH gene, an intergenic region, the dnaA gene, the oriC sequence, and the 5' partial sequence of the dnaN gene. The analysis revealed fragments with reduced electrophoretic mobility, which indicates the presence of curved DNA segments. The analysis of the helical parameter ENDS ratio revealed three bent DNA sites (b1, b2, and b3) located in the rpmH-dnaA intergenic region, the dnaA gene, and the oriC 5' end, respectively. The chromosomal segment of X. fastidiosa analyzed here is rich in phased AT tracts and in CAnT motifs. The 2-D projection indicated a segment whose structure was determined by the cumulative effect of all bent DNA sites. Further, the in silico analysis of the three different bacterial oriC sequences indicated similar negative roll and twist >34.00 degrees values. The DnaA box sequences, and other motifs in them, may be associated with the intrinsic DNA curvature.

Atomic force microscopy of DNA in solution and DNA modelling show that structural properties specify the eukaryotic replication initiation site

The replication origins (ORIs) of Schizosaccharomyces pombe, like those in most eukaryotes, are long chromosomal regions localized within A+T-rich domains. Although there is no consensus sequence, the interacting proteins are strongly conserved, suggesting that DNA structure is important for ORI function. We used atomic force microscopy in solution and DNA modelling to study the structural properties of the Spars1 origin. We show that this segment is the least stable of the surrounding DNA (9 kb), and contains regions of intrinsically bent elements (strongly curved and inherently supercoiled DNAs). The pORC-binding site co-maps with a superhelical DNA region, where the spatial arrangement of adenine/thymine stretches may provide the binding substrate. The replication initiation site (RIP) is located within a strongly curved DNA region. On pORC unwinding, this site shifts towards the apex of the curvature, thus potentiating DNA melting there. Our model is entirely consistent with the sequence variability, large size and A+T-richness of ORIs, and also accounts for the multistep nature of the initiation process, the specificity of pORC-binding site(s), and the specific location of RIP. We show that the particular DNA features and dynamic properties identified in Spars1 are present in other eukaryotic origins.

Gradual melting of a replication origin (Schizosaccharomyces pombe ars1): in situ atomic force microscopy (AFM) analysis

Local DNA melting is integral to fundamental processes such as replication or transcription. In vivo, these two processes do not occur on molecules free in solution but, instead, involve DNA molecules which are organized into DNA/proteins complexes. Atomic force microscopy imaging offers a possibility to look at individual molecules. It allowed us to follow the progress of local denaturation in liquid, but with the added constraints of DNA lying on a surface. We present a kinetic analysis of the mapping of the temperature-driven melting seen at a replication origin (Schizosaccharomyces pombe ars1). The results indicate an expected base composition dependency, but also a strong extremity effect. Noteworthy, a "structural" effect is clearly occurring - which is shown by the greater susceptibility of the strongly curved region present in the sequence to unwind. DNA melting, at this place, is seen to occur after an increase in the curvature amplitude and a simultaneous shift of the nucleotide sequence positioned at the apex. Because this may determine the position of the Replication Initiation (R.I.) site, the result suggests that eukaryotic replication origins, although described as possessing no consensus sequences, may well have their mechanics sustained by the properties of common structural features. Our analysis may, therefore, provide new information that will give genuine insights on how DNA molecules behave when organized into primosomes, replisomes, promoter initiation complexes, etc. and thus, be essential to better understanding the way genes function.

DNA bending in the replication zone of the C3 DNA puff amplicon of Rhynchosciara americana (Diptera: Sciaridae)

Intrinsic bent DNA sites were identified in the 4289 bp segment encompassing the replication zone which directs DNA amplification and transcription of the C3-22 gene of Rhynchosciara americana. Restriction fragments showed reduced electrophoretic mobility in polyacrylamide gels. The 2D modeling of the 3D DNA path and the ENDS ratio values obtained from the dinucleotide wedge model of Trifonov revealed the presence of four major bent sites, positioned at nucleotides -6753, -5433, -5133 and -4757. Sequence analysis showed that these bends are composed of 2-6 bp dA.dT tracts in phase with the DNA helical repeat. The circular permutation analysis permitted the verification that the fragments containing the bending sites promote curvature in other sequence contexts. Computer analyses of the 4289 bp sequence revealed low helical stability (DeltaG values), negative roll angles indicating a narrow minor groove and a putative matrix attachment region. The data presented in this paper add to information about the structural features involved in this amplified segment.

Accuracy of AFM measurements of the contour length of DNA fragments adsorbed on mica in air and in aqueous buffer

The measurement by atomic force microscope of the contour length of DNA fragments adsorbed on mica has been made as accurate as possible by revisiting the different steps of image acquisition and processing. In air, the DNA helical rise was estimated at 2.97 +/- 0.15 A per base pair (bp) (mean +/- standard deviation) by imaging a 648-bp DNA fragment and 2.95 +/- 0.14 A per bp for a 115-bp fragment. This confirms earlier observations suggesting that drying DNA fragments on mica in the presence of nickel induces limited conformational changes. At this point the exact nature of these conformational changes remains unknown. Simple hypotheses are the transconformation of stretches of the DNA molecules to the A-form of the double helix or alteration of the helix structure at the points of contact between DNA and mica. By contrast, in aqueous buffer, the measured helical rise was 3.14 +/- 0.15 A per bp for the 648-bp fragment and 3.17 +/- 0.13 A per bp for the 1115-bp fragment. Thus, measured helical rises do not depend on the fragment length and are significantly shorter than the 3.38 A per bp measured by crystallography, but close to the 3.18 A per bp found in NMR studies. These findings are discussed with respect to discrepancies in earlier results published in the literature.

The systemic paradigm and its relevance to the modelling of biological functions

If we are to make advances in the design of information systems for the processing of functional genomic data, we must carefully examine the concepts of gene and function. Therefore, we must consider the biological models that are used to acquire these data from an epistemological point of view. This article introduces three elements of this view: (i) we reviewed the major concepts and the axioms of the systemic paradigm; (ii) we considered their relevance for the modelling of the biological functions within the framework of an intracellular signalling process; (iii) we present an operational input founded on this methodological viewpoint to illustrate the coherence of a theoretical framework and the use of its formalism for the description and the representation of biological activities. This formalism will guide the modelling and the interpretation of molecular interactions in terms of organisational operations producing and transforming the genetic information; thus, providing a better understanding of the complex relationship between the generation, the circulation and the computation of information when biological systems are set up.

Tertiary structures of the Escherichia coli and human chromosome 21 molecules of DNA

Using the NDB database, we calculated geometrical parameters that were needed to reproduce crystal structures of short DNA fragments in a phosphorus atom representation. The geometrical parameters were included in a software generating tertiary structures of, for example, the Escherichia coli and human chromosome 21 molecules of DNA whose complete nucleotide sequences are deposited in the EMBL and related databases. Both molecules were found to be heavily folded and composed of domains. A more elaborate version of the present approach will make analysis and comparison possible of tertiary structures of genomic DNA molecules of various chromosomes to identify the chromosome evolutionary and functional relationships.

Genetic and epigenetic regulation schemes: need for an alternative paradigm

Self-organization of living cells results from the tangle of positive and negative feedback developed to ensure their homeostasis and/or their differentiation. There are three major means cellular regulation operates: the genetic, the epigenetic, and the metabolic ones. The regulation type in each of them has been overviewed. Further examination of relations between complexity and developmental stability points out sui generis properties of feedback loops, which are redundancy and pleiotropy. Prototypical schemes for positive and negative regulation with redundant and pleiotropic (including multifunctional) proteins are presented. They stress a theoretical shift from the analytical to the systemic framework. The systemic paradigm appears to be of increasing interest and importance in the study of concepts for the representation of genetic and epigenetic regulations.