Integron integrase binds to bulged hairpin DNA

Belt and braces: Two escape ways to maintain the cassette reservoir of large chromosomal integrons

Integrons are adaptive devices that capture, stockpile, shuffle and express gene cassettes thereby sampling combinatorial phenotypic diversity. Some integrons called sedentary chromosomal integrons (SCIs) can be massive structures containing hundreds of cassettes. Since most of these cassettes are non-expressed, it is not clear how they remain stable over long evolutionary timescales. Recently, it was found that the experimental inversion of the SCI of Vibrio cholerae led to a dramatic increase of the cassette excision rate associated with a fitness defect. Here, we question the evolutionary sustainability of this apparently counter selected genetic context. Through experimental evolution, we find that the integrase is rapidly inactivated and that the inverted SCI can recover its original orientation by homologous recombination between two insertion sequences (ISs) present in the array. These two outcomes of SCI inversion restore the normal growth and prevent the loss of cassettes, enabling SCIs to retain their roles as reservoirs of functions. These results illustrate a nice interplay between gene orientation, genome rearrangement, bacterial fitness and demonstrate how integrons can benefit from their embedded ISs.

Cassette recombination dynamics within chromosomal integrons are regulated by toxin-antitoxin systems

Integrons are adaptive bacterial devices that rearrange promoter-less gene cassettes into variable ordered arrays under stress conditions, thereby sampling combinatorial phenotypic diversity. Chromosomal integrons often carry hundreds of silent gene cassettes, with integrase-mediated recombination leading to rampant DNA excision and integration, posing a potential threat to genome integrity. How this activity is regulated and controlled, particularly through selective pressures, to maintain such large cassette arrays is unknown. Here, we show a key role of promoter-containing toxin-antitoxin (TA) cassettes as systems that kill the cell when the overall cassette excision rate is too high. These results highlight the importance of TA cassettes regulating the cassette recombination dynamics and provide insight into the evolution and success of integrons in bacterial genomes.

Cassette recruitment in the chromosomal Integron of Vibrio cholerae

Integrons confer a rapid adaptation capability to bacteria. Integron integrases are able to capture and shuffle novel functions embedded in cassettes. Here, we investigated cassette recruitment in the Vibrio cholerae chromosomal integron during horizontal transfer. We demonstrated that the endogenous integrase expression is sufficiently triggered, after SOS response induction mediated by the entry of cassettes during conjugation and natural transformation, to mediate significant cassette insertions. These insertions preferentially occur at the attIA site, despite the presence of about 180 attC sites in the integron array. Thanks to the presence of a promoter in the attIA site vicinity, all these newly inserted cassettes are expressed and prone to selection. We also showed that the RecA protein is critical for cassette recruitment in the V. cholerae chromosomal integron but not in mobile integrons. Moreover, unlike the mobile integron integrases, that of V. cholerae is not active in other bacteria. Mobile integrons might have evolved from the chromosomal ones by overcoming host factors, explaining their large dissemination in bacteria and their role in antibioresistance expansion.

Primary and promiscuous functions coexist during evolutionary innovation through whole protein domain acquisitions

Molecular examples of evolutionary innovation are scarce and generally involve point mutations. Innovation can occur through larger rearrangements, but here experimental data is extremely limited. Integron integrases innovated from double-strand- toward single-strand-DNA recombination through the acquisition of the I2 α-helix. To investigate how this transition was possible, we have evolved integrase IntI1 to what should correspond to an early innovation state by selecting for its ancestral activity. Using synonymous alleles to enlarge sequence space exploration, we have retrieved 13 mutations affecting both I2 and the multimerization domains of IntI1. We circumvented epistasis constraints among them using a combinatorial library that revealed their individual and collective fitness effects. We obtained up to 10⁴-fold increases in ancestral activity with various asymmetrical trade-offs in single-strand-DNA recombination. We show that high levels of primary and promiscuous functions could have initially coexisted following I2 acquisition, paving the way for a gradual evolution toward innovation.

Structure-specific DNA recombination sites: Design, validation, and machine learning-based refinement

Recombination systems are widely used as bioengineering tools, but their sites have to be highly similar to a consensus sequence or to each other. To develop a recombination system free of these constraints, we turned toward attC sites from the bacterial integron system: single-stranded DNA hairpins specifically recombined by the integrase. Here, we present an algorithm that generates synthetic attC sites with conserved structural features and minimal sequence-level constraints. We demonstrate that all generated sites are functional, their recombination efficiency can reach 60%, and they can be embedded into protein coding sequences. To improve recombination of less efficient sites, we applied large-scale mutagenesis and library enrichment coupled to next-generation sequencing and machine learning. Our results validated the efficiency of this approach and allowed us to refine synthetic attC design principles. They can be embedded into virtually any sequence and constitute a unique example of a structure-specific DNA recombination system.

Structural heterogeneity of attC integron recombination sites revealed by optical tweezers

A predominant tool for adaptation in Gram-negative bacteria is the functional genetic platform called integron. Integrons capture and rearrange promoterless gene cassettes in a unique recombination process involving the recognition of folded single-stranded DNA hairpins—so-called attC sites—with a strong preference for the attC bottom strand. While structural elements have been identified to promote this preference, their mechanistic action remains incomplete. Here, we used high-resolution single-molecule optical tweezers (OT) to characterize secondary structures formed by the attC bottom (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{upgreek} \usepackage{mathrsfs} \setlength{\oddsidemargin}{-69pt} \begin{document} }{}${{att}}{{{C}}_{{\rm{bs}}}}$\end{document}) and top (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{upgreek} \usepackage{mathrsfs} \setlength{\oddsidemargin}{-69pt} \begin{document} }{}${{att}}{{{C}}_{{\rm{ts}}}}$\end{document}) strands of the paradigmatic attC_aadA7 site. We found for both sequences two structures—a straight, canonical hairpin and a kinked hairpin. Remarkably, the recombination-preferred \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{upgreek} \usepackage{mathrsfs} \setlength{\oddsidemargin}{-69pt} \begin{document} }{}${{att}}{{{C}}_{{\rm{bs}}}}$\end{document} predominantly formed the straight hairpin, while the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{upgreek} \usepackage{mathrsfs} \setlength{\oddsidemargin}{-69pt} \begin{document} }{}${{att}}{{{C}}_{{\rm{ts}}}}$\end{document} preferentially adopted the kinked structure, which exposes only one complete recombinase binding box. By a mutational analysis, we identified three bases in the unpaired central spacer, which could invert the preferred conformations and increase the recombination frequency of the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{upgreek} \usepackage{mathrsfs} \setlength{\oddsidemargin}{-69pt} \begin{document} }{}${{att}}{{{C}}_{{\rm{ts}}}}$\end{document}in vivo. A bioinformatics screen revealed structural bias toward a straight, canonical hairpin conformation in the bottom strand of many antibiotic resistance cassettes attC sites. Thus, we anticipate that structural fine tuning could be a mechanism in many biologically active DNA hairpins.

Integrase-Mediated Recombination of the bel-1 Gene Cassette Encoding the Extended-Spectrum β-Lactamase BEL-1

Integrons are genetic elements that can acquire and rearrange gene cassettes. The bla_BEL-1 gene encodes an extended-spectrum β-lactamase, BEL-1, that is present at the second position of the variable region of class 1 integrons identified in Pseudomonas aeruginosa The mobility of the bel-1 gene cassette was analyzed under physiological conditions and with the integrase gene being overexpressed. Cassette mobility in Escherichia coli was detected by excision/integration into the recipient integron In3 on the conjugative plasmid R388 with the overproduced integrase. Despite several antibiotic pressures, the bel-1 cassette remained at the second position in the integron, highlighting its stability in P. aeruginosa Overexpression of the integrase gene in E. coli induced bel-1 cassette recombination. However, cassettes containing two genes (bla_BEL-1 and smr2 or bla_BEL-1 and aacA4) were excised, suggesting that the bel-1 cassette attC site was defective. We show that bel-1 is a stable gene cassette under physiological growth conditions, irrespective of the selective antibiotic pressure, that may be mobilized upon overexpression of the integrase gene.

Differences in Integron Cassette Excision Dynamics Shape a Trade-Off between Evolvability and Genetic Capacitance

Integrons ensure a rapid and "on demand" response to environmental stresses driving bacterial adaptation. They are able to capture, store, and reorder functional gene cassettes due to site-specific recombination catalyzed by their integrase. Integrons can be either sedentary and chromosomally located or mobile when they are associated with transposons and plasmids. They are respectively called sedentary chromosomal integrons (SCIs) and mobile integrons (MIs). MIs are key players in the dissemination of antibiotic resistance genes. Here, we used in silico and in vivo approaches to study cassette excision dynamics in MIs and SCIs. We show that the orientation of cassette arrays relative to replication influences attC site folding and cassette excision by placing the recombinogenic strands of attC sites on either the leading or lagging strand template. We also demonstrate that stability of attC sites and their propensity to form recombinogenic structures also regulate cassette excision. We observe that cassette excision dynamics driven by these factors differ between MIs and SCIs. Cassettes with high excision rates are more commonly found on MIs, which favors their dissemination relative to SCIs. This is especially true for SCIs carried in the Vibrio genus, where maintenance of large cassette arrays and vertical transmission are crucial to serve as a reservoir of adaptive functions. These results expand the repertoire of known processes regulating integron recombination that were previously established and demonstrate that, in terms of cassette dynamics, a subtle trade-off between evolvability and genetic capacitance has been established in bacteria.IMPORTANCE The integron system confers upon bacteria a rapid adaptation capability in changing environments. Specifically, integrons are involved in the continuous emergence of bacteria resistant to almost all antibiotic treatments. The international situation is critical, and in 2050, the annual number of deaths caused by multiresistant bacteria could reach 10 million, exceeding the incidence of deaths related to cancer. It is crucial to increase our understanding of antibiotic resistance dissemination and therefore integron recombination dynamics to find new approaches to cope with the worldwide problem of multiresistance. Here, we studied the dynamics of recombination and dissemination of gene encoding cassettes carried on integrons. By combining in silico and in vivo analyses, we show that cassette excision is highly regulated by replication and by the intrinsic properties of cassette recombination sites. We also demonstrated differences in the dynamics of cassette recombination between mobile and sedentary chromosomal integrons (MIs and SCIs). For MIs, a high cassette recombination rate is favored and timed to conditions when generating diversity (upon which selection can act) allows for a rapid response to environmental conditions and stresses. In contrast, for SCIs, cassette excisions are less frequent, limiting cassette loss and ensuring a large pool of cassettes. We therefore confirm a role of SCIs as reservoirs of adaptive functions and demonstrate that the remarkable adaptive success of integron recombination system is due to its intricate regulation.

IMP-27, a Unique Metallo-β-Lactamase Identified in Geographically Distinct Isolates of Proteus mirabilis

A novel metallo-β-lactamase gene, bla_IMP-27, was identified in unrelated Proteus mirabilis isolates from two geographically distinct locations in the United States. Both isolates harbor bla_IMP-27 as part of the first gene cassette in a class 2 integron. Antimicrobial susceptibility testing indicated susceptibility to aztreonam, piperacillin-tazobactam, and ceftazidime but resistance to ertapenem. However, hydrolysis assays indicated that ceftazidime was a substrate for IMP-27.

Efficiency of integron cassette insertion in correct orientation is ensured by the interplay of the three unpaired features of attC recombination sites

The integron is a bacterial recombination system that allows acquisition, stockpiling and expression of cassettes carrying protein-coding sequences, and is responsible for the emergence and rise of multiresistance in Gram-negative bacteria. The functionality of this system depends on the insertion of promoterless cassettes in correct orientation, allowing their expression from the promoter located upstream of the cassette array. Correct orientation is ensured by strand selectivity of integron integrases for the bottom strand of cassette recombination sites (attC), recombined in form of folded single-stranded hairpins. Here, we investigated the basis of such strand selectivity by comparing recombination of wild-type and mutated attC sites with different lengths, sequences and structures. We show that all three unpaired structural features that distinguish the bottom and top strands contribute to strand selectivity. The localization of Extra-Helical Bases (EHBs) directly favors integrase binding to the bottom strand. The Unpaired Central Spacer (UCS) and the Variable Terminal Structure (VTS) influence strand selectivity indirectly, probably through the stabilization of the bottom strand and the resulting synapse due to the nucleotide skew between the two strands. These results underscore the importance of the single-stranded nature of the attC site that allows such tight control over integron cassette orientation.

HattCI: Fast and Accurate attC site Identification Using Hidden Markov Models

Integrons are genetic elements that facilitate the horizontal gene transfer in bacteria and are known to harbor genes associated with antibiotic resistance. The gene mobility in the integrons is governed by the presence of attC sites, which are 55 to 141-nucleotide-long imperfect inverted repeats. Here we present HattCI, a new method for fast and accurate identification of attC sites in large DNA data sets. The method is based on a generalized hidden Markov model that describes each core component of an attC site individually. Using twofold cross-validation experiments on a manually curated reference data set of 231 attC sites from class 1 and 2 integrons, HattCI showed high sensitivities of up to 91.9% while maintaining satisfactory false-positive rates. When applied to a metagenomic data set of 35 microbial communities from different environments, HattCI found a substantially higher number of attC sites in the samples that are known to contain more horizontally transferred elements. HattCI will significantly increase the ability to identify attC sites and thus integron-mediated genes in genomic and metagenomic data. HattCI is implemented in C and is freely available at http://bioinformatics.math.chalmers.se/HattCI .

The Integron: Adaptation On Demand

The integron is a powerful system which, by capturing, stockpiling, and rearranging new functions carried by gene encoding cassettes, confers upon bacteria a rapid adaptation capability in changing environments. Chromosomally located integrons (CI) have been identified in a large number of environmental Gram-negative bacteria. Integron evolutionary history suggests that these sedentary CIs acquired mobility among bacterial species through their association with transposable elements and conjugative plasmids. As a result of massive antibiotic use, these so-called mobile integrons are now widespread in clinically relevant bacteria and are considered to be the principal agent in the emergence and rise of antibiotic multiresistance in Gram-negative bacteria. Cassette rearrangements are catalyzed by the integron integrase, a site-specific tyrosine recombinase. Central to these reactions is the single-stranded DNA nature of one of the recombination partners, the attC site. This makes the integron a unique recombination system. This review describes the current knowledge on this atypical recombination mechanism, its implications in the reactions involving the different types of sites, attC and attI, and focuses on the tight regulation exerted by the host on integron activity through the control of attC site folding. Furthermore, cassette and integrase expression are also highly controlled by host regulatory networks and the bacterial stress (SOS) response. These intimate connections to the host make the integron a genetically stable and efficient system, granting the bacteria a low cost, highly adaptive evolution potential "on demand".

Integrons: past, present, and future

Integrons are versatile gene acquisition systems commonly found in bacterial genomes. They are ancient elements that are a hot spot for genomic complexity, generating phenotypic diversity and shaping adaptive responses. In recent times, they have had a major role in the acquisition, expression, and dissemination of antibiotic resistance genes. Assessing the ongoing threats posed by integrons requires an understanding of their origins and evolutionary history. This review examines the functions and activities of integrons before the antibiotic era. It shows how antibiotic use selected particular integrons from among the environmental pool of these elements, such that integrons carrying resistance genes are now present in the majority of Gram-negative pathogens. Finally, it examines the potential consequences of widespread pollution with the novel integrons that have been assembled via the agency of human antibiotic use and speculates on the potential uses of integrons as platforms for biotechnology.

The integron integrase efficiently prevents the melting effect of Escherichia coli single-stranded DNA-binding protein on folded attC sites

Integrons play a major role in the dissemination of antibiotic resistance genes among bacteria. Rearrangement of gene cassettes occurs by recombination between attI and attC sites, catalyzed by the integron integrase. Integron recombination uses an unconventional mechanism involving a folded single-stranded attC site. This site could be a target for several host factors and more precisely for proteins able to bind single-stranded DNA. One of these, Escherichia coli single-stranded DNA-binding protein (SSB), regulates many DNA processes. We studied the influence of this protein on integron recombination. Our results show the ability of SSB to strongly bind folded attC sites and to destabilize them. This effect was observed only in the absence of the integrase. Indeed, we provided evidence that the integrase is able to counterbalance the observed effect of SSB on attC site folding. We showed that IntI1 possesses an intrinsic property to capture attC sites at the moment of their extrusion, stabilizing them and recombining them efficiently. The stability of DNA secondary structures in the chromosome must be restrained to avoid genetic instability (mutations or deletions) and/or toxicity (replication arrest). SSB, which hampers attC site folding in the absence of the integrase, likely plays an important role in maintaining the integrity and thus the recombinogenic functionality of the integron attC sites. We also tested the RecA host factor and excluded any role of this protein in integron recombination.

Integrase-mediated recombination of the veb1 gene cassette encoding an extended-spectrum β-lactamase

The veb1 gene cassette encodes the extended spectrum β-lactamase, VEB-1 that is increasingly isolated from worldwide Gram-negative rods. Veb1 is commonly inserted into the variable region of different class 1 integrons in which it is always associated with a downstream-located aadB gene cassette encoding an aminoglycoside adenylyltransferase. In Pseudomonas aeruginosa, the majority of veb1-containing integrons also carry an insertion sequence, IS1999 that is inserted upstream of the veb1 gene cassette and disrupts the integron specific recombination site, attI1. Investigation of the recombination properties of the sites surrounding veb1 revealed that insertion of IS1999 reduces significantly the recombination frequency of attI1 and that veb1 attC is not efficient for recombination in contrast to aadB attC. Subsequent sequence optimisation of veb1 attC by mutagenesis, into a more consensual attC site resembling aadB attC, successfully improved recombination efficiency. Overall, this work gives some insights into the organisation of veb1-containing integrons. We propose that IS1999 and the nature of veb1 attC stabilize the veb1 gene cassette environment likely by impairing recombination events upstream or downstream of veb1, respectively.

Group IIC intron with an unusual target of integration in Enterobacter cloacae

A potential role of group IIC-attC introns in integron gene cassette formation, that is, the way in which they could provide the attC sequence essential for recombination, has been proposed. Group IIC introns usually target the attC site of gene cassettes and more specifically their inverse core. Here we characterized a novel group IIC intron targeting the core site of the aadA1 gene cassette attC site (aadA1-qacEΔ1 gene cassette junction) from enterobacterial isolates. Intron mobility (retrohoming) was analyzed using a two-plasmid assay performed in Escherichia coli. Intron mobility assays confirmed the mobilization-integration of the group II intron into the core site of the aadA2, bla(VIM-2), bla(CARB-2), aac(6')-Ib, dfrXVb, arr2, cmlA4, and aadB gene cassettes but not into the attI site. This mobility was dependent on maturase activity. Reverse transcriptase PCR showed that this intron was transcriptionally active, and an intermediate circular form was detected by inverse PCR. This element was linked to the bla(VEB-1) extended-spectrum β-lactamase gene in a high number of enterobacterial isolates. A phylogenetic tree showed that the identified element was located in a branch separate from group IIC-attC introns, being an IIC intron possessing the ability to integrate using the core site of the attC sites as target.

Effect of attC structure on cassette excision by integron integrases

Background

Integrons are genetic elements able to integrate and disseminate genes as cassettes by a site-specific recombination mechanism. These elements contain a gene coding for an integrase that carries out recombination by interacting with two different target sites; the attI site in cis with the integrase and the palindromic attC site of a gene cassette. Integron integrases (IntIs) bind specifically to the bottom strand of attC sites. The extrahelical bases resulting from folding of attC bottom strands are important for the recognition by integrases. These enzymes are directly involved in the accumulation and formation of new cassette arrangements in the variable region of integrons. Thus, it is important to better understand interactions between IntIs and their substrates.

Results

We compared the ability of five IntIs to carry out excision of several cassettes flanked by different attC sites. The results showed that for most cassettes, IntI1 was the most active integrase. However, IntI2*179E and SonIntIA could easily excise cassettes containing the attC_dfrA1 site located upstream, whereas IntI1 and IntI3 had only a weak excision activity for these cassettes. Analysis of the secondary structure adopted by the bottom strand of attC_dfrA1 has shown that the identity of the extrahelical bases and the distance between them (A-N_7-8-C) differ from those of attCs contained in the cassettes most easily excisable by IntI1 (T-N₆-G). We used the attC_dfrA1 site upstream of the sat2 gene cassette as a template and varied the identity and spacing between the extrahelical bases in order to determine how these modifications influence the ability of IntI1, IntI2*179E, IntI3 and SonIntIA to excise cassettes. Our results show that IntI1 is more efficient in cassette excision using T-N₆-G or T-N₆-C attCs while IntI3 recognizes only a limited range of attCs. IntI2*179E and SonIntIA are more tolerant of changes to the identity and spacing of extrahelical bases.

Conclusions

This study provides new insights into the factors that influence the efficiency of cassette excision by integron integrases. It also suggests that IntI2 and SonIntIA have an evolutionary path that is different from IntI1 and IntI3, in their ability to recognize and excise cassettes.

Mutagenesis and homology modeling of the Tn21 integron integrase IntI1

Horizontal DNA transfer between bacteria is widespread and a major cause of antibiotic resistance. For logistic reasons, single or combined genes are shuttled between vectors such as plasmids and bacterial chromosomes. Special elements termed integrons operate in such shuttling and are therefore vital for horizontal gene transfer. Shorter elements carrying genes, cassettes, are integrated in the integrons, or excised from them, by virtue of a recombination site, attC, positioned in the 3' end of each unit. It is a remarkable and possibly restricting elementary feature of attC that it must be single-stranded while the partner target site, attI, may be double-stranded. The integron integrases belong to the tyrosine recombinase family, and this work reports mutations of the integrase IntI1 from transposon Tn21, chosen within a well-conserved region characteristic of the integron integrases. The mutated proteins were tested for binding to a bottom strand of an attC substrate, by using an electrophoresis mobility shift assay. To aid in interpreting the results, a homology model was constructed on the basis of the crystal structure of integron integrase VchIntIA from Vibrio cholerae bound to its cognate attC substrate VCRbs. The local stability and hydrogen bonding network of key domains of the modeled structure were further examined using molecular dynamics simulations. The homology model allowed us to interpret the roles of several amino acid residues, four of which were clearly binding assay responsive upon mutagenesis. Notably, we also observed features indicating that IntI1 may be more prone to base-specific contacts with VCRbs than VchIntIA.

Structural features of single-stranded integron cassette attC sites and their role in strand selection

We recently showed that cassette integration and deletion in integron platforms were occurring through unconventional site-specific recombination reactions involving only the bottom strand of attC sites. The lack of sequence conservation among attC sites led us to hypothesize that sequence-independent structural recognition determinants must exist within attC sites. The structural data obtained from a synaptic complex of the Vibrio cholerae integrase with the bottom strand of an attC site has shown the importance of extra helical bases (EHB) inside the stem-loop structure formed from the bottom strand. Here, we systematically determined the contribution of three structural elements common to all known single-stranded attC site recombination substrates (the EHBs, the unpaired central spacer (UCS), and the variable terminal structure (VTS)) to strand choice and recombination. Their roles have been evaluated in vivo in the attI×attC reaction context using the suicide conjugation assay we previously developed, but also in an attC×attC reaction using a deletion assay. Conjugation was used to deliver the attC sites in single-stranded form. Our results show that strand choice is primarily directed by the first EHB, but the presence of the two other EHBs also serves to increase this strand selection. We found that the structure of the central spacer is essential to achieve high level recombination of the bottom strand, suggesting a dual role for this structure in active site exclusion and for hindering the reverse reaction after the first strand exchange. Moreover, we have shown that the VTS has apparently no role in strand selectivity.

Integrons play a preponderant role in the development of multiple antibiotic resistances among Gram-negative bacteria. Their success is rooted in their unique aptitude to assemble genes through a site-specific recombination process. They have recently been shown to use an unconventional recombination pathway, which involves recombination between a canonical double stranded attI site and a uniquely folded single stranded attC substrate. Due to its complex and variable structure, which includes several unpaired regions and extrahelical nucleotides, recognition of the attC site was elusive. Here, we determined the contribution of each of the different structural elements common to many folded single stranded attC substrates, in the recognition and recombination efficiency by the integron recombinase. We found that a single specific extrahelical nucleotide is responsible for the choice between the two anti-parallel complementary strands of each attC site, an essential discrimination for guaranteeing the expression of the acquired gene by the integron platform. These studies open the way to the design of synthetic sites and the use of this powerful loose-specificity recombination system for various gene transfer applications.

Group IIC intron mobility into attC sites involves a bulged DNA stem-loop motif

Bacterial group IIC introns are a subclass of group II intron ribozymes that are typically located downstream from transcriptional terminators. Class IIC-attC introns constitute a monophyletic subset of subgroup IIC, which preferentially insert into site-specific recombination sequences for integron integrases (attC). attCs are a diverse family of nucleotide sequences composed of conserved inverted repeats that flank a variable, but palindromic, central region. In this study, we used both PCR and colony patch hybridization methods to determine the basis for recognition of the attC(aadA1) stem-loop motif by the Serratia marcescens intron (S.ma.I2) in vivo. The quantitative results showed that mobility into the wild-type site occurs at a frequency of 18%, and is strongly biased by the orientation of the homing site relative to the direction of DNA replication. S.ma.I2 mobility results into mutant attC(aadA1) sites are consistent with recognition of stem-loop motifs in unwound DNA. The homing frequency results showed that, while the entire attC sequence is not necessary for recognition of the insertion site, short deletions of the attC stem-loop motif inhibited the intron mobility. Moreover, our data show that S.ma.I2 requires a bulged base in the folded attC stem for high homing frequency. We demonstrate that the IBS1/IBS3 motifs and two bulge bases conserved among attCs determine S.ma.I2 homing specificity for the attC bottom strand. These results suggest that class IIC-attC introns tolerate attC variation by recognition of a bulged hairpin DNA motif rather than a specific sequence.

Gene cassettes and cassette arrays in mobile resistance integrons

Gene cassettes are small mobile elements, consisting of little more than a single gene and recombination site, which are captured by larger elements called integrons. Several cassettes may be inserted into the same integron forming a tandem array. The discovery of integrons in the chromosome of many species has led to the identification of thousands of gene cassettes, mostly of unknown function, while integrons associated with transposons and plasmids carry mainly antibiotic resistance genes and constitute an important means of spreading resistance. An updated compilation of gene cassettes found in sequences of such 'mobile resistance integrons' in GenBank was facilitated by a specially developed automated annotation system. At least 130 different (<98% identical) cassettes that carry known or predicted antibiotic resistance genes were identified, along with many cassettes of unknown function. We list exemplar GenBank accession numbers for each and address some nomenclature issues. Various modifications to cassettes, some of which may be useful in tracking cassette epidemiology, are also described. Despite potential biases in the GenBank dataset, preliminary analysis of cassette distribution suggests interesting differences between cassettes and may provide useful information to direct more systematic studies.

The S.ma.I2 class C group II intron inserts at integron attC sites

We previously found the class C S.ma.I2 group II (GII) intron in Serratia marcescens SCH909 inserted into the variable region of a class 1 integron within the attC site of the ant(2'')-Ia gene cassette. Here, we demonstrate that this ant(2'')-Ia : : S.ma.I2 gene cassette is a recombinationally active element despite the presence of the S.ma.I2 intron. In addition, S.ma.I2 is an active GII intron capable of performing self-splicing and invading specific target sites. Intron homing to a DNA target site is RecA-independent and recognizes the intron binding site (IBS)1 and IBS3 regions, formed by the 5' TTGTT 3' consensus sequence located within the inverse core site of attC integrons. Our results also indicate that the process for S.ma.I2 intron mobilization involves a secondary structure provided by the folding of the complete attC site. Moreover, phylogenetic analysis of the class C GII introns showed a clear divergent clade formed by introns that insert within specific sites usually associated with lateral gene transfer.

A new in vitro strand transfer assay for monitoring bacterial class 1 integron recombinase IntI1 activity

IntI1 integrase is a tyrosine recombinase involved in the mobility of antibiotic resistance gene cassettes within bacterial class 1 integrons. Recent data have shown that its recombination specifically involves the bottom strand of the attC site, but the exact mechanism of the reaction is still unclear. An efficient in vitro assay is still required to better characterize the biochemical properties of the enzyme. In this report we describe for the first time an in vitro system partially reproducing the activity of a recombinant pure IntI1. This new assay, which constitutes the only available in vitro model of recombination by IntI1, was used to determine whether this enzyme might be the sole bacterial protein required for the recombination process. Results show that IntI1 possesses all the features needed for performing recombination between attI and attC sites. However, differences in the in vitro intermolecular recombination efficiencies were found according to the target sites and were correlated with DNA affinities of the enzyme but not with in vivo data. The differential affinity of the enzyme for each site, its capacity to bind to a single-stranded structure at the attC site and the recombination observed with single-stranded substrates unambiguously confirm that it constitutes an important intermediary in the reaction. Our data strongly suggest that the enzyme possesses all the functions for generating and/or recognizing this structure even in the absence of other cellular factors. Furthermore, the in vitro assay reported here constitutes a powerful tool for the analysis of the recombination steps catalyzed by IntI1, its structure-function studies and the search for specific inhibitors.

Predicting knot or catenane type of site-specific recombination products

Site-specific recombination on supercoiled circular DNA yields a variety of knotted or catenated products. Here, we present a topological model of this process and characterize all possible products of the most common substrates: unknots, unlinks, and torus knots and catenanes. This model tightly prescribes the knot or catenane type of previously uncharacterized data. We also discuss how the model helps to distinguish products of distributive recombination and, in some cases, determine the order of processive recombination products.

Identification of key structural determinants of the IntI1 integron integrase that influence attC x attI1 recombination efficiency

The integron platform codes for an integrase (IntI) from the tyrosine family of recombinases that mediates recombination between a proximal double-strand recombination site, attI and a single-strand target recombination site, attC. The attI site is only recognized by its cognate integrase, while the various tested attCs sites are recombined by several different IntI integrases. We have developed a genetic system to enrich and select mutants of IntI1 that provide a higher yield of recombination in order to identify key protein structural elements important for attC × attI1 recombination. We isolated mutants with higher activity on wild type and mutant attC sites. Interestingly, three out of four characterized IntI1 mutants selected on different substrates are mutants of the conserved aspartic acid in position 161. The IntI1 model we made based on the VchIntIA 3D structure suggests that substitution at this position, which plays a central role in multimer assembly, can increase or decrease the stability of the complex and accordingly influence the rate of attI × attC recombination versus attC × attC. These results suggest that there is a balance between the specificity of the protein and the protein/protein interactions in the recombination synapse.

Mechanisms of site-specific recombination

Integration, excision, and inversion of defined DNA segments commonly occur through site-specific recombination, a process of DNA breakage and reunion that requires no DNA synthesis or high-energy cofactor. Virtually all identified site-specific recombinases fall into one of just two families, the tyrosine recombinases and the serine recombinases, named after the amino acid residue that forms a covalent protein-DNA linkage in the reaction intermediate. Their recombination mechanisms are distinctly different. Tyrosine recombinases break and rejoin single strands in pairs to form a Holliday junction intermediate. By contrast, serine recombinases cut all strands in advance of strand exchange and religation. Many natural systems of site-specific recombination impose sophisticated regulatory mechanisms on the basic recombinational process to favor one particular outcome of recombination over another (for example, excision over inversion or deletion). Details of the site-specific recombination processes have been revealed by recent structural and biochemical studies of members of both families.

Differential expression analysis of Escherichia coli proteins using a novel software for relative quantitation of LC-MS/MS data

The study of changes in protein levels between samples derived from cells representing different biological conditions is a key to the understanding of cellular function. There are two main methods available that allow both for global scanning for significantly varying proteins and targeted profiling of proteins of interest. One method is based on 2-D gel electrophoresis and image analysis of labelled proteins. The other method is based on LC-MS/MS analysis of either unlabelled peptides or peptides derived from isotopically labelled proteins or peptides. In this study, the non-labelling approach was used involving a new software, DeCyder MS Differential Analysis Software (DeCyder MS) intended for automated detection and relative quantitation of unlabelled peptides in LC-MS/MS data. Total protein extracts of E. coli strains expressing varying levels of dihydrofolate reductase and integron integrase were digested with trypsin and analyzed using a nanoscale liquid chromatography system, Ettan MDLC, online connected to an LTQTM linear ion-trap mass spectrometer fitted with a nanospray interface. Acquired MS data were subjected to DeCyder MS analysis where 2-D representations of the peptide patterns from individual LC-MS/MS analyses were matched and compared. This approach to unlabelled quantitative analysis of the E. coli proteome resulted in relative protein abundances that were in good agreement with results obtained from traditional methods for measuring protein levels.

Combinatorial genetic evolution of multiresistance

The explosion in genetic information, whilst extending our knowledge, might not necessary increase our conceptual understanding on the complexities of bacterial genetics, or why some antibiotic resistant genotypes such as blaCTX-M-15 and blaVIM-2 appear to dominate. However, the information we have thus far suggests that clinical isolates have 'hijacked' plasmids, primarily built of backbone-DNA originating from environmental bacteria. Additionally, the combinatorial presence of other elements such as transposons, integrons, insertion sequence (IS) elements and the 'new' ISCR (IS common region) elements have also contributed to the increase in antibiotic resistance - an antibiotic resistant cluster composing four or five genes has become commonplace. In some instances, the presence of antibiotics themselves, such as fluoroquinolones, can mediate a bacterial SOS cell response, subsequently amplifying and/or augmenting the transfer of large genetic entities therefore, potentially promoting long-term detrimental effects.

Integrons: agents of bacterial evolution

Integrons are assembly platforms - DNA elements that acquire open reading frames embedded in exogenous gene cassettes and convert them to functional genes by ensuring their correct expression. They were first identified by virtue of their important role in the spread of antibiotic-resistance genes. More recently, our understanding of their importance in bacterial genome evolution has broadened with the discovery of larger integron structures, termed superintegrons. These DNA elements contain hundreds of accessory genes and constitute a significant fraction of the genomes of many bacterial species. Here, the basic biology of integrons and superintegrons, their evolutionary history and the evidence for the existence of a novel recombination pathway is reviewed.

Structural basis for broad DNA-specificity in integron recombination

Lateral DNA transfer--the movement of genetic traits between bacteria--has a profound impact on genomic evolution and speciation. The efficiency with which bacteria incorporate genetic information reflects their capacity to adapt to changing environmental conditions. Integron integrases are proteins that mediate site-specific DNA recombination between a proximal primary site (attI) and a secondary target site (attC) found within mobile gene cassettes encoding resistance or virulence factors. The lack of sequence conservation among attC sites has led to the hypothesis that a sequence-independent structural recognition determinant must exist within attC. Here we report the crystal structure of an integron integrase bound to an attC substrate. The structure shows that DNA target site recognition and high-order synaptic assembly are not dependent on canonical DNA but on the position of two flipped-out bases that interact in cis and in trans with the integrase. These extrahelical bases, one of which is required for recombination in vivo, originate from folding of the bottom strand of attC owing to its imperfect internal dyad symmetry. The mechanism reported here supports a new paradigm for how sequence-degenerate single-stranded genetic material is recognized and exchanged between bacteria.

Integron cassette insertion: a recombination process involving a folded single strand substrate

Integrons play a major role in the dissemination of antibiotic resistance genes among Gram-negative pathogens. Integron gene cassettes form circular intermediates carrying a recombination site, attC, and insert into an integron platform at a second site, attI, in a reaction catalyzed by an integron-specific integrase IntI. The IntI1 integron integrase preferentially binds to the 'bottom strand' of single-stranded attC. We have addressed the insertion mechanism in vivo using a recombination assay exploiting plasmid conjugation to exclusively deliver either the top or bottom strand of different integrase recombination substrates. Recombination of a single-stranded attC site with an attI site was 1000-fold higher for one strand than for the other. Conversely, following conjugative transfer of either attI strand, recombination with attC is highly unfavorable. These results and those obtained using mutations within a putative attC stem-and-loop strongly support a novel integron cassette insertion model in which the single bottom attC strand adopts a folded structure generating a double strand recombination site. Thus, recombination would insert a single strand cassette, which must be subsequently processed.

Active site sharing and subterminal hairpin recognition in a new class of DNA transposases

Many bacteria harbor simple transposable elements termed insertion sequences (IS). In Helicobacter pylori, the chimeric IS605 family elements are particularly interesting due to their proximity to genes encoding gastric epithelial invasion factors. Protein sequences of IS605 transposases do not bear the hallmarks of other well-characterized transposases. We have solved the crystal structure of full-length transposase (TnpA) of a representative member, ISHp608. Structurally, TnpA does not resemble any characterized transposase; rather, it is related to rolling circle replication (RCR) proteins. Consistent with RCR, Mg2+ and a conserved tyrosine, Tyr127, are essential for DNA nicking and the formation of a covalent intermediate between TnpA and DNA. TnpA is dimeric, contains two shared active sites, and binds two DNA stem loops representing the conserved inverted repeats near each end of ISHp608. The cocrystal structure with stem-loop DNA illustrates how this family of transposases specifically recognizes and pairs ends, necessary steps during transposition.

The single-stranded genome of phage CTX is the form used for integration into the genome of Vibrio cholerae

A major determinant of Vibrio cholerae pathogenicity, the cholera enterotoxin, is encoded in the genome of an integrated phage, CTXvarphi. CTXvarphi integration depends on two host-encoded tyrosine recombinases, XerC and XerD. It occurs at dif1, a 28 bp site on V. cholerae chromosome 1 normally used by XerCD for chromosome dimer resolution. The replicative form of the phage contains two pairs of binding sites for XerC and XerD in inverted orientations. Here we show that in the single-stranded genome of the phage, these sites fold into a hairpin structure, which creates a recombination target for XerCD. In the presence of XerD, XerC can catalyze a single pair of strand exchanges between this target and dif1, resulting in integration of the phage. This integration strategy explains why the rules that normally apply to tyrosine recombinase reactions seemed not to apply to CTXvarphi integration and, in particular, why integration is irreversible.