Sequences in attB that affect the ability of phiC31 integrase to synapse and to activate DNA cleavage

The influence of coiled-coil motif of serine recombinase toward the directionality regulation

Serine integrases promote the recombination of two complementary DNA sequences, attP and attB, to create hybrid sequences, attL and attR. The reaction is unidirectional in the absence of an accessory protein called recombination directionality factor. We utilized tethered particle motion (TPM) experiments to investigate the reaction behaviors of two model serine integrases from Listeria innocua phage LI and Streptomyces coelicolor phage C31. Detailed kinetic analyses of wild-type and mutant proteins were carried out to verify the mechanisms of recombination directionality. In particular, we assessed the influence of a coiled-coil motif (CC) that is conserved in the C-terminal domain of serine integrases and is an important prerequisite for efficient recombination. Compared to wild type, we found that CC deletions in both serine integrases reduced the overall abundance of integrase (Int) att-site complexes and favored the formation of nonproductive complexes over recombination-competent complexes. Furthermore, the rate at which CC mutants formed productive synaptic complexes and disassembled aberrant nonproductive complexes was significantly reduced. It is notable that while the φC31 Int CC is essential for recombination, the LI Int CC plays an auxiliary role for recombination to stabilize protein-protein interactions and to control the directionality of the reaction.

Next generation synthetic memory via intercepting recombinase function

Here we present a technology to facilitate synthetic memory in a living system via repurposing Transcriptional Programming (i.e., our decision-making technology) parts, to regulate (intercept) recombinase function post-translation. We show that interception synthetic memory can facilitate programmable loss-of-function via site-specific deletion, programmable gain-of-function by way of site-specific inversion, and synthetic memory operations with nested Boolean logical operations. We can expand interception synthetic memory capacity more than 5-fold for a single recombinase, with reconfiguration specificity for multiple sites in parallel. Interception synthetic memory is ~10-times faster than previous generations of recombinase-based memory. We posit that the faster recombination speed of our next-generation memory technology is due to the post-translational regulation of recombinase function. This iteration of synthetic memory is complementary to decision-making via Transcriptional Programming - thus can be used to develop intelligent synthetic biological systems for myriad applications.

Complete genomes and comparative analyses of Streptomyces phages that influence secondary metabolism and sporulation

Bacteria in the genus Streptomyces are found ubiquitously in nature and are known for the number and diversity of specialized metabolites they produce, as well as their complex developmental lifecycle. Studies of the viruses that prey on Streptomyces, known as phages, have aided the development of tools for genetic manipulation of these bacteria, as well as contributing to a deeper understanding of Streptomyces and their behaviours in the environment. Here, we present the genomic and biological characterization of twelve Streptomyces phages. Genome analyses reveal that these phages are closely related genetically, while experimental approaches show that they have broad overlapping host ranges, infect early in the Streptomyces lifecycle, and induce secondary metabolite production and sporulation in some Streptomyces species. This work expands the group of characterized Streptomyces phages and improves our understanding of Streptomyces phage-host dynamics.

High fidelity one-pot DNA assembly using orthogonal serine integrases

BACKGROUND

Large serine integrases (LSIs, derived from temperate phages) have been adapted for use in a multipart DNA assembly process in vitro, called serine integrase recombinational assembly (SIRA). The versatility, efficiency, and fidelity of SIRA is limited by lack of a sufficient number of LSIs whose activities have been characterized in vitro.

METHODS AND MAJOR RESULTS

In this report, we compared the activities in vitro of 10 orthogonal LSIs to explore their suitability for multiplex SIRA reactions. We found that Bxb1, ϕR4, and TG1 integrases were the most active among the set we studied, but several others were also usable. As proof of principle, we demonstrated high-efficiency one-pot assembly of six DNA fragments (made by PCR) into a 7.5 kb plasmid that expresses the enzymes of the β-carotenoid pathway in Escherichia coli, using six different LSIs. We further showed that a combined approach using a few highly active LSIs, each acting on multiple pairs of att sites with distinct central dinucleotides, can be used to scale up "poly-part" gene assembly and editing.

CONCLUSIONS AND IMPLICATIONS

We conclude that use of multiple orthogonal integrases may be the most predictable, efficient, and programmable approach for SIRA and other in vitro applications.

A bipartite thermodynamic-kinetic contribution by an activating mutation to RDF-independent excision by a phage serine integrase

Streptomyces phage ϕC31 integrase (Int)—a large serine site-specific recombinase—is autonomous for phage integration (attP x attB recombination) but is dependent on the phage coded gp3, a recombination directionality factor (RDF), for prophage excision (attL x attR recombination). A previously described activating mutation, E449K, induces Int to perform attL x attR recombination in the absence of gp3, albeit with lower efficiency. E449K has no adverse effect on the competence of Int for attP x attB recombination. Int(E449K) resembles Int in gp3 mediated stimulation of attL x attR recombination and inhibition of attP x attB recombination. Using single-molecule analyses, we examined the mechanism by which E449K activates Int for gp3-independent attL x attR recombination. The contribution of E449K is both thermodynamic and kinetic. First, the mutation modulates the relative abundance of Int bound attL-attR site complexes, favoring pre-synaptic (PS) complexes over non-productively bound complexes. Roughly half of the synaptic complexes formed from Int(E449K) pre-synaptic complexes are recombination competent. By contrast, Int yields only inactive synapses. Second, E449K accelerates the dissociation of non-productively bound complexes and inactive synaptic complexes formed by Int. The extra opportunities afforded to Int(E499K) in reattempting synapse formation enhances the probability of success at fruitful synapsis.

Site-Specific Integration by Recruitment of a Complex of ΦC31 Integrase and Donor DNA to a Target Site by Using a Tandem, Artificial Zinc-Finger Protein

To solve the problem of uncontrolled therapeutic gene integration, which is a critical drawback of retroviral vectors for gene therapy, the integration sites of exogenous genes should be precisely controlled not to perturb endogenous gene expression. To accomplish this, we explored the possibility of site-specific integration using two six-finger artificial zinc-finger proteins (AZPs) tandemly conjugated via a flexible peptide linker (designated "Tandem AZP"). A Tandem AZP in which two AZPs recognize specific 19 bp targets in a donor and acceptor DNA was expected to site-specifically recruit the donor DNA to the acceptor DNA. Thereafter, an exogenously added integrase was expected to integrate the donor DNA into a specific site in the acceptor DNA (as it might be in the human genome). We demonstrated in vitro that in the presence of Tandem AZP, ΦC31 integrase selectively integrated a donor plasmid into a target acceptor plasmid not only at 30 °C (the optimum temperature of the integrase) but also at 37 °C (for future application in humans). We expect that with further improvement of our current system, a combination of Tandem AZP with integrase/recombinase will enable site-specific integration in mammalian cells and provide safer gene therapy technology.

Serine Integrase attP Binding and Specificity

Serine integrases catalyze the site-specific insertion of viral DNA into a host's genome. The minimal requirements and irreversible nature of this integration reaction have led to the use of serine integrases in applications ranging from bacterial memory storage devices to gene therapy. Our understanding of how the integrase proteins recognize the viral (attP) and host (attB) attachment sites is limited, with structural data available for only a Listeria integrase C-terminal domain (CTD) bound to an attP half-site. Here we report quantitative binding and saturation mutagenesis analyses for the Listeria innocua prophage attP site and a new 2.8-Å crystal structure of the CTD•attP half site. We find that Int binds with high affinity to attP (6.9 nM), but the Int CTD binds to attP half-sites with only 7- to 10-fold lower affinity, supporting the idea that free energy is expended to open an Int dimer for attP binding. Despite the 50-bp Int-attP interaction surface, only 20 residues are sensitive to mutagenesis, and of these, only 6 require a specific residue for efficient Int binding and integration activity. One of the integrase DNA-binding domains, the recombinase domain, appears to be primarily non-specific. Several substitutions result in an improved attP site, indicating that higher-efficiency attachment sites can be obtained through site engineering. These findings advance our understanding of serine integrase function and provide important data for efforts towards engineering this family of enzymes for a variety of biotechnology applications.

The ΦBT1 large serine recombinase catalyzes DNA integration at pseudo-attB sites in the genus Nocardia

Plasmid vectors based on bacteriophage integrases are important tools in molecular microbiology for the introduction of foreign DNA, especially into bacterial species where other systems for genetic manipulation are limited. Site specific integrases catalyze recombination between phage and bacterial attachment sites (attP and attB, respectively) and the best studied integrases in the actinomycetes are the serine integrases from the Streptomyces bacteriophages ΦC31 and ΦBT1. As this reaction is unidirectional and highly stable, vectors containing phage integrase systems have been used in a number of genetic engineering applications. Plasmids bearing the ΦBT1 integrase have been used to introduce DNA into Streptomyces and Amycolatopsis strains; however, they have not been widely studied in other actinobacterial genera. Here, we show that vectors based on ΦBT1 integrase can stably integrate into the chromosomes of a range of Nocardia species, and that this integration occurs despite the absence of canonical attB sites in these genomes. Furthermore, we show that a ΦBT1 integrase-based vector can insert at multiple pseudo-attB sites within a single strain and we determine the sequence of a pseudo-attB motif. These data suggest that ΦBT1 integrase-based vectors can be used to readily and semi-randomly introduce foreign DNA into the genomes of a range of Nocardia species. However, the precise site of insertion will likely require empirical determination in each species to avoid unexpected off-target effects.

Site-specificity of serine integrase demonstrated by the attB sequence preference of ɸBT1 integrase

Serine integrases mediate site-specific recombination and are extensively applied in genetic engineering and synthetic biology. However, which regions of the attachment sites determine site-specificity and how these regions function in recombination remain elusive. Here, we explored the sequence features of attB attachment sites recognized by ɸBT1 integrase, a representative serine integrase. A 34-bp DNA motif is found that displays distinct base-specific preference for every position. Further investigation of mutations at different positions within the attB sequence shows different recombination efficiencies and binding affinities. We found four conserved regions within the attB motif that coincide with the results of recombination assays, and mutations in the attB sequence that hamper recombination almost all cause reduced binding affinity.

Genome Integration and Excision by a New Streptomyces Bacteriophage, ϕJoe

Bacteriophages are the source of many valuable tools for molecular biology and genetic manipulation. In Streptomyces, most DNA cloning vectors are based on serine integrase site-specific DNA recombination systems derived from phage. Because of their efficiency and simplicity, serine integrases are also used for diverse synthetic biology applications. Here, we present the genome of a new Streptomyces phage, ϕJoe, and investigate the conditions for integration and excision of the ϕJoe genome. ϕJoe belongs to the largest Streptomyces phage cluster (R4-like) and encodes a serine integrase. The attB site from Streptomyces venezuelae was used efficiently by an integrating plasmid, pCMF92, constructed using the ϕJoe int-attP locus. The attB site for ϕJoe integrase was occupied in several Streptomyces genomes, including that of S. coelicolor, by a mobile element that varies in gene content and size between host species. Serine integrases require a phage-encoded recombination directionality factor (RDF) to activate the excision reaction. The ϕJoe RDF was identified, and its function was confirmed in vivo. Both the integrase and RDF were active in in vitro recombination assays. The ϕJoe site-specific recombination system is likely to be an important addition to the synthetic biology and genome engineering toolbox.

IMPORTANCEStreptomyces spp. are prolific producers of secondary metabolites, including many clinically useful antibiotics. Bacteriophage-derived integrases are important tools for genetic engineering, as they enable integration of heterologous DNA into the Streptomyces chromosome with ease and high efficiency. Recently, researchers have been applying phage integrases for a variety of applications in synthetic biology, including rapid assembly of novel combinations of genes, biosensors, and biocomputing. An important requirement for optimal experimental design and predictability when using integrases, however, is the need for multiple enzymes with different specificities for their integration sites. In order to provide a broad platform of integrases, we identified and validated the integrase from a newly isolated Streptomyces phage, ϕJoe. ϕJoe integrase is active in vitro and in vivo. The specific recognition site for integration is present in a wide range of different actinobacteria, including Streptomyces venezuelae, an emerging model bacterium in Streptomyces research.

Recent advances in genetic modification systems for Actinobacteria

Actinobacteria are extremely important to human health, agriculture, and forests. Because of the vast differences of the characteristics of Actinobacteria, a lot of genetic tools have been developed for efficiently manipulating the genetics. Although there are a lot of successful examples of engineering Actinobacteria, they are still more difficult to be genetically manipulated than other model microorganisms such as Saccharomyces cerevisiae, Escherichia coli, and Bacillus subtilis etc. due to the diverse genomics and biochemical machinery. Here, we review the methods to introduce heterologous DNA into Actinobacteria and the available genetic modification tools. The trends and problems existing in engineering Actinobacteria are also covered.

Single-molecule analysis of ϕC31 integrase-mediated site-specific recombination by tethered particle motion

Serine and tyrosine site-specific recombinases (SRs and YRs, respectively) provide templates for understanding the chemical mechanisms and conformational dynamics of strand cleavage/exchange between DNA partners. Current evidence suggests a rather intriguing mechanism for serine recombination, in which one half of the cleaved synaptic complex undergoes a 180° rotation relative to the other. The 'small' and 'large' SRs contain a compact amino-terminal catalytic domain, but differ conspicuously in their carboxyl-terminal domains. So far, only one serine recombinase has been analyzed using single substrate molecules. We now utilized single-molecule tethered particle motion (TPM) to follow step-by-step recombination catalyzed by a large SR, phage ϕC31 integrase. The integrase promotes unidirectional DNA exchange between attB and attP sites to integrate the phage genome into the host chromosome. The recombination directionality factor (RDF; ϕC31 gp3) activates the excision reaction (attL × attR). From integrase-induced changes in TPM in the presence or absence of gp3, we delineated the individual steps of recombination and their kinetic features. The gp3 protein appears to regulate recombination directionality by selectively promoting or excluding active conformations of the synapse formed by specific att site partners. Our results support a 'gated rotation' of the synaptic complex between DNA cleavage and joining.

Mechanistic Modeling of a Rewritable Recombinase Addressable Data Module

Many of the most important applications predicted to arise from Synthetic Biology will require engineered cellular memory with the capability to store data in a rewritable and reversible manner upon induction by transient stimuli. DNA recombination provides an ideal platform for cellular data storage and has allowed the development of a rewritable recombinase addressable data (RAD) module, capable of efficient data storage within a chromosome. Here, we develop the first detailed mechanistic model of DNA recombination, and validate it against a new set of in vitro data on recombination efficiencies across a range of different concentrations of integrase and gp3. Investigation of in vivo recombination dynamics using our model reveals the importance of fully accounting for all mechanistic features of DNA recombination in order to accurately predict the effect of different switching strategies on RAD module performance, and highlights its usefulness as a design tool for building future synthetic circuitry.

Phage-encoded Serine Integrases and Other Large Serine Recombinases

The large serine recombinases (LSRs) are a family of enzymes, encoded in temperate phage genomes or on mobile elements, that precisely cut and recombine DNA in a highly controllable and predictable way. In phage integration, the LSRs act at specific sites, the attP site in the phage and the attB site in the host chromosome, where cleavage and strand exchange leads to the integrated prophage flanked by the recombinant sites attL and attR. The prophage can excise by recombination between attL and attR but this requires a phage-encoded accessory protein, the recombination directionality factor (RDF). Although the LSRs can bind specifically to all the recombination sites, only specific integrase-bound sites can pair in a synaptic complex prior to strand exchange. Recent structural information has led to a breakthrough in our understanding of the mechanism of the LSRs, notably how the LSRs bind to their substrates and how LSRs display this site-selectivity. We also understand that the RDFs exercise control over the LSRs by protein-protein interactions. Other recent work with the LSRs have contributed to our understanding of how all serine recombinases undergo strand exchange subunit rotation, facilitated by surfaces that resemble a molecular bearing.

Heterologous expression of galbonolide biosynthetic genes in Streptomyces coelicolor

The galbonolide antibiotics are non-glycosylated heptaketide 14-membered macrolides. These antibiotics exhibit broad-spectrum fungicidal activities, including against the human pathogen Cryptococcus neoformans. Previously, galbonolides B and E were isolated from the marine actinomycete Streptomyces sp. LZ35. By bioinformatics analysis, the putative galbonolide biosynthetic gene cluster, gbn, was identified in the genome of strain LZ35. In order to verify that the core genes (gbnA-E) are sufficient for synthesizing the basic structure of galbonolide as previously proposed, we performed the heterologous expression of gbnA-E in a "clean background" host Streptomyces coelicolor ZM12, in which all the native polyketide synthase genes have been deleted. As expected, the production of galbonolide B (1) was detected in the transformant. To the best of our knowledge, this is the first report that demonstrates the essential role of gbnA-E in the biosynthesis of galbonolides by heterologous expression. This heterologous expression system would be helpful to generate novel galbonolide derivatives by co-overexpression of unusual biosynthesis extender units.

Unusual site-specific DNA integration into the highly active pseudo-attB of the Streptomyces albus J1074 genome

The φC31-encoded recombination system has become a widely used tool for genetic analysis of streptomycetes, gene therapy and generation of transgenic animals. However, the application of this system, even in the context of its natural host genus, Streptomyces, may require a specific approach for each species. In this study, we have identified a novel pseudo-attB site, called pseB4, for integration of vectors using the φC31 system. More than 90 % of clones contained two copies of pSET152- or pOJ436-based cosmids, after their introduction into S. albus. The efficiency of the integration of φC31-based vectors into pseB4 is therefore comparable to that of the integration into attB. Moreover, in contrast with integration into the native attB, integration into pseB4 is not polar and does not require a complementary sequence in the TT-core region. Furthermore, an analysis of conjugation frequency revealed mutual inhibition of plasmid integration into either site when both the attB and pseB4 sites were present in the genome.

The ins and outs of serine integrase site-specific recombination

Serine integrases catalyze the integration and excision of phage genomes into and out of bacterial chromosomes in a highly specific and directional manner, making these proteins powerful tools for genome engineering. In 2013, the first structure of a serine integrase-DNA complex was reported. This work revealed how the phage attP sequence is recognized by the integrase and provided important clues about how serine integrases bind to other attachment site sequences. The resulting structural models indicate that distinct spatial arrangements of integrase domains are present for each attachment site complex. Here we describe how serine integrases may exploit this site-dependent domain arrangement to regulate the direction of recombination. We also discuss how phage-encoded recombination directionality factors could change this directionality by altering the nature of inter-subunit interactions.

Cross-talk between diverse serine integrases

Phage-encoded serine integrases are large serine recombinases that mediate integrative and excisive site-specific recombination of temperate phage genomes. They are well suited for use in heterologous systems and for synthetic genetic circuits as the attP and attB attachment sites are small (<50 bp), there are no host factor or DNA supercoiling requirements, and they are strongly directional, doing only excisive recombination in the presence of a recombination directionality factor. Combining different recombinases that function independently and without cross-talk to construct complex synthetic circuits is desirable, and several different serine integrases are available. However, we show here that these functions are not reliably predictable, and we describe a pair of serine integrases encoded by mycobacteriophages Bxz2 and Peaches with unusual and unpredictable specificities. The integrases share only 59% amino acid sequence identity and the attP sites have fewer than 50% shared bases, but they use the same attB site and there is non-reciprocal cross-talk between the two systems. The DNA binding specificities do not result from differences in specific DNA contacts but from the constraints imposed by the configuration of the component half-sites within each of the attachment site DNAs.

Large serine recombinase domain structure and attachment site binding

Large serine recombinases (LSRs) catalyze the movement of DNA elements into and out of bacterial chromosomes using site-specific recombination between short DNA "attachment sites". The LSRs that function as bacteriophage integrases carry out integration between attachment sites in the phage (attP) and in the host (attB). This process is highly directional; the reverse excision reaction between the product attL and attR sites does not occur in the absence of a phage-encoded recombination directionality factor, nor does recombination typically occur between other pairings of attachment sites. Although the mechanics of strand exchange are reasonably well understood through studies of the closely related resolvase and invertase serine recombinases, many of the fundamental aspects of the LSR reactions have until recently remained poorly understood on a structural level. In this review, we discuss the results of several years worth of biochemical and molecular genetic studies of LSRs in light of recently described structural models of LSR-DNA complexes. The focus is understanding LSR domain structure, how LSRs bind to the attP and attB attachment sites, and the differences between attP-binding and attB-binding modes. The simplicity, site-selectivity and strong directionality of the LSRs has led to their use as important tools in a number of genetic engineering applications in a wide variety of organisms. Given the important potential role of LSR enzymes in genetic engineering and gene therapy, understanding the structure and DNA-binding properties of LSRs is of fundamental importance for those seeking to enhance or alter specificity and functionality in these systems.

Attachment site recognition and regulation of directionality by the serine integrases

Serine integrases catalyze the integration of bacteriophage DNA into a host genome by site-specific recombination between ‘attachment sites’ in the phage (attP) and the host (attB). The reaction is highly directional; the reverse excision reaction between the product attL and attR sites does not occur in the absence of a phage-encoded factor, nor does recombination occur between other pairings of attachment sites. A mechanistic understanding of how these enzymes achieve site-selectivity and directionality has been limited by a lack of structural models. Here, we report the structure of the C-terminal domains of a serine integrase bound to an attP DNA half-site. The structure leads directly to models for understanding how the integrase-bound attP and attB sites differ, why these enzymes preferentially form attP × attB synaptic complexes to initiate recombination, and how attL × attR recombination is prevented. In these models, different domain organizations on attP vs. attB half-sites allow attachment-site specific interactions to form between integrase subunits via an unusual protruding coiled-coil motif. These interactions are used to preferentially synapse integrase-bound attP and attB and inhibit synapsis of integrase-bound attL and attR. The results provide a structural framework for understanding, testing and engineering serine integrase function.

Attachment site selection and identity in Bxb1 serine integrase-mediated site-specific recombination

Phage-encoded serine integrases mediate directionally regulated site-specific recombination between short attP and attB DNA sites without host factor requirements. These features make them attractive for genome engineering and synthetic genetics, although the basis for DNA site selection is poorly understood. Here we show that attP selection is determined through multiple proofreading steps that reject non-attP substrates, and that discrimination of attP and attB involves two critical site features: the outermost 5–6 base pairs of attP that are required for Int binding and recombination but antagonize attB function, and the “discriminators” at positions −15/+15 that determine attB identity but also antagonize attP function. Thus, although the attachment sites differ in length and sequence, only two base changes are needed to convert attP to attL, and just two more from attL to attB. The opposing effect of site identifiers ensures that site schizophrenia with dual identities does not occur.

Site-specific recombinases catalyze recombination between two specific DNA sites to generate the products of recombination. The Integrase encoded by mycobacteriophage Bxb1 is a member of the serine-recombinase family and catalyzes strand exchange between attP and attB, the attachment sites for the phage and bacterial host, respectively. Although the DNA sites are relatively small (<50 bp), the reaction is highly selective for these sites and is also strongly directional. Here, we address the question of what sequences within attP are required for it to act as an attP site and identify the key sequence features that are required not just for Integrase binding but also for synapsis and post-synapsis events. We also have identified the key determinants of attP and attB identity, and although the sites are different in sequence and length, they can be interconverted with just two base changes in each of the half sites.

The site-specific integration reaction of Listeria phage A118 integrase, a serine recombinase

Background

A large subfamily of serine recombinases contains long polypeptide segments appended to the C-terminal end of the conserved catalytic domain. Members of this subfamily often function as phage integrases but also mediate transposition and regulate terminal differentiation processes in eubacteria. Although a few members of this subfamily have been studied in purified in vitro systems, key mechanistic aspects of reactions promoted by these recombinases remain to be determined, particularly with respect to the functions of the large C-terminal domain.

Results

We have developed and characterized a robust in vitro recombination reaction by the Listeria phage A118 integrase, a member of the subfamily of serine recombinases containing a large C-terminal domain. The reaction occurs in a simple buffered salt solution and exhibits a modest stimulation by divalent cations or spermidine and DNA supercoiling. Recombination with purified A118 integrase is unidirectional, being efficient only between attP and attB DNA sites to either join separate DNA molecules (intermolecular recombination) or to generate deletions or inversions depending on the relative orientation of att sites in cis (intramolecular recombination). The minimal attP site is 50 bp but requires only 44 bp of base sequence information, whereas the minimal attB site is 42 bp and requires 38 bp of base sequence information. DNA exchange occurs between the central 2 bp of attP and attB. Identity between these two base pairs is required for recombination, and they solely determine the orientation of recombination sites. The integrase dimer binds efficiently to full att sites, including the attL and attR integration products, but poorly and differentially to each half-site. The large C-terminal domain can be separated from the N-terminal catalytic by partial proteolysis and mediates non-cooperative DNA binding to att sites.

Conclusions

The basic properties of the phage A118 integrase reaction and its substrate requirements have been elucidated. A118 integrase thus joins the handful of biochemically characterized serine integrases that are serving as models for mechanistic studies on this important class of recombinases. Information reported here will also be useful in exploiting this recombinase for genetic engineering.

Adjusting the attB site in donor plasmid improves the efficiency of ΦC31 integrase system

ΦC31 integrase, a site-specific recombinase, can catalyze integration of circular DNA bearing attB site into pseudo attP sites in mammalian genomes. However, the integration efficiency mediated by integrase is relatively low. Our study centered on the investigation of the impact of the position, orientation, and number of attBs in the donor plasmid on the efficiency of ΦC31 integrase system. Donor plasmids bearing various types of attBs (including forward and reverse directions, tandem, and intersperse) and reporter enhanced green fluorescent protein (EGFP) were constructed. The plasmids plus helper plasmid encoding integrase were co-transfected into HeLa cells. After G418 selection, the resistant cell colonies were counted for calculating chromosomal integration frequency. EGFP expression was detected by fluorescence-activated cell sorter and enzyme-linked immunosorbent assay analysis. The results showed that efficiency of integration mediated by integrase accounted for 70% ± 7.1% of total integration events in the transfected HeLa cells. Compared with a forward orientation of attB in donor plasmid, a reverse direction of attB or interspersed attBs showed 1.5- or 2.8-fold increase in integration efficiency, respectively, while tandem attBs in donor plasmids caused a decreased efficiency of integration. We conclude that the adjustment of attB sites in donor plasmids may be of value for gene therapy and routine genetic engineering by using ΦC31 integrase system.

Characterization of DNA sequences required for the CcrAB-mediated integration of staphylococcal cassette chromosome mec, a Staphylococcus aureus genomic island

The mobile element staphylococcal cassette chromosome mec (SCCmec), which carries mecA, the gene responsible for methicillin resistance in staphylococci, inserts into the chromosome at a specific site, attB, mediated by serine recombinases, CcrAB and CcrC, encoded on the element. This study sought to determine the sequence specificity for CcrB DNA binding in vitro and for CcrAB-mediated SCCmec insertion in vivo. CcrB DNA binding, as assessed in vitro by electrophoretic mobility shift assay (EMSA), revealed that a 14-bp sequence (CGTATCATAAGTAA; the terminal sequence of the orfX gene) was the minimal requirement for binding, containing an invariant sequence (TATCATAA) found in all chromosomal (attB) and SCCmec (attS) integration sites. The sequences flanking the minimal attB and attS binding sites required for insertion in vivo were next determined. A plasmid containing only 37 bp of attS and flanking sequences was required for integration into the attB site at 92% efficiency. In contrast, at least 200 bp of sequence within orfX, 5' to the attB core, and 120 bp of specific sequence 3' to the orfX stop site and attB core were required for the highest insertion frequency. Finally, an attS-containing plasmid was inserted into wild-type Staphylococcus aureus strains without integrated SCCmec (methicillin susceptible) at various frequencies which were determined both by sequences flanking the att site and by the presence of more than one att site on either the chromosome or the integration plasmid. This sequence specificity may play a role in the epidemiology of SCCmec acquisition.

Toward improvement of erythromycin A production in an industrial Saccharopolyspora erythraea strain via facilitation of genetic manipulation with an artificial attB site for specific recombination

Large-scale production of erythromycin A (Er-A) relies on the organism Saccharopolyspora erythraea, in which lack of a typical attB site largely impedes the application of phage ΦC31 integrase-mediated recombination into site-specific engineering. We herein report construction of an artificial attB site in an industrial S. erythraea strain, HL3168 E3, in an effort to break the bottleneck previously encountered during genetic manipulation mainly from homologous or unpredictable nonspecific integration. Replacement of a cryptic gene, nrps1-1, with a cassette containing eight attB DNA sequences did not affect the high Er-producing ability, setting the stage for precisely engineering the industrial Er-producing strain for foreign DNA introduction with a reliable conjugation frequency. Transfer of either exogenous or endogenous genes of importance to Er-A biosynthesis, including the S-adenosylmethionine synthetase gene for positive regulation, vhb for increasing the oxygen supply, and two tailoring genes, eryK and eryG, for optimizing the biotransformation at the late stage, was achieved by taking advantage of this facility, allowing systematic improvement of Er-A production as well as elimination of the by-products Er-B and Er-C in fermentation. The strategy developed here can generally be applicable to other strains that lack the attB site.

Zinc is essential for high-affinity DNA binding and recombinase activity of ΦC31 integrase

The mechanism through which the large serine recombinases bind DNA is poorly understood. Alignments of ϕC31 integrase (Int) and its relatives indicate the presence of a conserved motif containing four cysteines resembling a zinc finger. Inductively coupled plasma–mass spectrometry (ICP–MS) confirmed that an Int monomer contains one atom of zinc. Pre-incubation of Int with ethylenediaminetetraacetic acid (EDTA) was detrimental for both recombination activity and DNA binding affinities but full activity could be restored by adding back Zn²⁺. Mutations in the cysteines and other highly conserved residues yielded proteins that were hypersensitive to proteases, suggesting that without zinc the domain is unfolded. Substitutions in the highly charged region between the conserved cysteines led to lowered DNA binding affinities while circular dichroism revealed that these variant Ints were not greatly affected in overall folding. Int was protected from inhibition by EDTA when DNA containing an attachment site was present suggesting that the zinc finger and the DNA are in close proximity. A truncated mutant of Int, hInt V371S^UGA, lacking the putative zinc finger could bind DNA with low affinity. The data are consistent with there being at least two DNA binding motifs in Int one of which is the zinc finger-like motif.

DNA cleavage is independent of synapsis during Streptomyces phage phiBT1 integrase-mediated site-specific recombination

Bacteriophage-encoded serine recombinases have great potential in genetic engineering but their catalytic mechanisms have not been adequately studied. Integration of ϕBT1 and ϕC31 via their attachment (att) sites is catalyzed by integrases of the large serine recombinase subtype. Both ϕBT1 and ϕC31 integrases were found to cleave single-substrate att sites without synaptic complex formation, and ϕBT1 integrase relaxed supercoiled DNA containing a single integration site. Systematic mutation of the central att site dinucleotide revealed that cleavage was independent of nucleotide sequence, but rejoining was crucially dependent upon complementarity of the cleavage products. Recombination between att sites containing dinucleotides with antiparallel complementarity led to antiparallel recombination. Integrase-substrate pre-incubation experiments revealed that the enzyme can form an attP-integrase tetramer complex that then captures naked attB DNA, and suggested that two alternative assembly pathways can lead to synaptic complex formation.

Sin resolvase catalytic activity and oligomerization state are tightly coupled

Serine recombinases promote specific DNA rearrangements by a cut-and-paste mechanism that involves cleavage of all four DNA strands at two sites recognized by the enzyme. Dissecting the order and timing of these cleavage events and the steps leading up to them is difficult because the cleavage reaction is readily reversible. Here, we describe assays using activated Sin mutants and a DNA substrate with a 3'-bridging phosphorothiolate modification that renders Sin-mediated DNA cleavage irreversible. We find that activating Sin mutations promote DNA cleavage rather than simply stabilize the cleavage product. Cleavage events at the scissile phosphates on complementary strands of the duplex are tightly coupled, and the overall DNA cleavage rate is strongly dependent on Sin concentration. When combined with analytical ultracentrifugation data, these results suggest that Sin catalytic activity and oligomerization state are tightly linked, and that activating mutations promote formation of a cleavage-competent oligomeric state that is normally formed only transiently within the full synaptic complex.

Site-specific recombination by φC31 integrase and other large serine recombinases

Most temperate phages encode an integrase for integration and excision of the prophage. Integrases belong either to the λ Int family of tyrosine recombinases or to a subgroup of the serine recombinases, the large serine recombinases. Integration by purified serine integrases occurs efficiently in vitro in the presence of their cognate (~50 bp) phage and host attachment sites, attP and attB respectively. Serine integrases require an accessory protein, Xis, to promote excision, a reaction in which the products of the integration reaction, attL and attR, recombine to regenerate attP and attB. Unlike other directional recombinases, serine integrases are not controlled by proteins occupying accessory DNA-binding sites. Instead, it is thought that different integrase conformations, induced by binding to the DNA substrates, control protein–protein interactions, which in turn determine whether recombination proceeds. The present review brings together the evidence for this model derived from the studies on φC31 integrase, Bxb1 integrase and other related proteins.

Mutational analysis of highly conserved residues in the phage phiC31 integrase reveals key amino acids necessary for the DNA recombination

Background

Amino acid sequence alignment of phage phiC31 integrase with the serine recombinases family revealed highly conserved regions outside the catalytic domain. Until now, no system mutational or biochemical studies have been carried out to assess the roles of these conserved residues in the recombinaton of phiC31 integrase.

Methodology/Principal Findings

To determine the functional roles of these conserved residues, a series of conserved residues were targeted by site-directed mutagenesis. Out of the 17 mutants, 11 mutants showed impaired or no recombination ability, as analyzed by recombination assay both in vivo and in vitro. Results of DNA binding activity assays showed that mutants (R18A, I141A, L143A,E153A, I432A and V571A) exhibited a great decrease in DNA binding affinity, and mutants (G182A/F183A, C374A, C376A/G377A, Y393A and V566A) had completely lost their ability to bind to the specific target DNA attB as compared with wild-type protein. Further analysis of mutants (R18A, I141A, L143A and E153A) synapse and cleavage showed that these mutants were blocked in recombination at the stage of strand cleavage.

Conclusions/Significance

This data reveals that some of the highly conserved residues both in the N-terminus and C-terminus region of phiC31 integrase, play vital roles in the substrate binding and cleavage. The cysteine-rich motif and the C-tail val-rich region of phiC31 integrase may represent the major DNA binding domains of phiC31 integrase.

Delivering the goods: viral and non-viral gene therapy systems and the inherent limits on cargo DNA and internal sequences

Viruses have long been considered to be the most promising tools for human gene therapy. However, the initial enthusiasm for the use of viruses has been tarnished in the light of potentially fatal side effects. Transposons have a long history of use with bacteria in the laboratory and are now routinely applied to eukaryotic model organisms. Transposons show promise for applications in human genetic modification and should prove a useful addition to the gene therapy tool kit. Here we review the use of viruses and the limitations of current approaches to gene therapy, followed by a more detailed analysis of transposon length and the physical properties of internal sequences, which both affect transposition efficiency. As transposon length increases, transposition decreases: this phenomenon is known as length-dependence, and has implications for vector cargo capacity. Disruption of internal sequences, either via deletion of native DNA or insertion of exogenous DNA, may reduce or enhance genetic mobility. These effects may be related to host factor binding, essential spacer requirements or other influences yet to be elucidated. Length-dependence is a complex phenomenon driven not simply by the distance between the transposon ends, but by host proteins, the transposase and the properties of the DNA sequences encoded within the transposon.

In vitro characterization of the site-specific recombination system based on actinophage TG1 integrase

We have previously shown that, in vivo, the integration system based on the gene encoding the TG1 integrase and the corresponding attB (TG1) and attP (TG1) sites works well not only in Streptomyces strains, but also in Escherichia coli. Furthermore, the attachment sites for TG1 integrase are distinct from those of phi C31 integrase. In this report, we expressed TG1 integrase as a GST-TG1 integrase fusion protein and then used affinity separation and specific cleavage to release purified integrase. Conditions for in vitro recombination were established using the purified TG1 integrase and its cognate attP (TG1) and attB (TG1) sites. TG1 integrase efficiently catalyzed a site-specific recombination between attB (TG1) and attP (TG1) sites irrespective of their substrate topology. The minimal sequences of attP (TG1) and attB (TG1) sites required for the substrates of TG1 integrase were demonstrated to be 43 and 39-bp, respectively. These results provide the basic features of the TG1 integrase system to be used as biotechnological tools, as well as to unravel the mechanism of the serine integrase.

PhiC31 integrase interacts with TTRAP and inhibits NFkappaB activation

Phage PhiC31 integrase-mediated gene delivery is believed to be safer than using retroviral vectors since the protein confines its insertion of the target gene to a limited number of sites in mammalian genomes. To evaluate its safety in human cells, it is important to understand the interactions between this integrase and cellular proteins. Here we show that PhiC31 integrase interacts with TTRAP as presented by yeast two-hybrid and co-immunoprecipitation assays. Reducing the expression of endogenous TTRAP can increase the efficiency of PhiC31 integrase-mediated integration. A possible effect of interaction between PhiC31 integrase and TTRAP was highlighted by the fact that PhiC31 integrase inhibited the NFkappaB activation mediated by IL-1 in a dose-dependent manner. Because low dose of PhiC31 integrase can mediate considerable recombination events, we suggest that low dose of PhiC31 integrase be used when this integrase is applied in human cells.

DNA binding and synapsis by the large C-terminal domain of phiC31 integrase

The integrase (Int) from phage ϕC31 acts on the phage and host-attachment sites, attP and attB, to form an integrated prophage flanked by attL and attR. Excision (attL × attR recombination) is prevented, in the absence of accessory factors, by a putative coiled-coil motif in the C-terminal domain (CTD). Int has a serine recombinase N-terminal domain, required for synapsis of recombination substrates and catalysis. We show here that the coiled-coil motif mediates protein–protein interactions between CTDs, but only when bound to DNA. Although the histidine-tagged CTD (hCTD) was monomeric in solution, hCTD bound cooperatively to three of the recombination substrates (attB, attL and attR). Furthermore, when provided with attP and attB, hCTD brought these substrates together in a synaptic complex. Substitutions in the coiled-coil motif that greatly reduce Int integration activity, L460P and Y475H, prevented CTD–CTD interactions and led to defective DNA binding and no detectable DNA synapsis. A substitution, E449K, in full length Int confers the ability to perform excision in addition to integration as it has gained the ability to synapse attL × attR. hCTD^E449K was similar to hCTD in DNA binding but unable to form the CTD synapse suggesting that the CTD synapse is not essential but could be part of the mechanism that controls directionality.

In vivo evaluation of PhiC31 recombinase activity using a self-excision cassette

Gene targeting allows precise tailoring of the mouse genome such that desired modifications can be introduced under precise temporal and spatial control. This can be achieved through the use of site-specific recombinases, which mediate deletion or inversion of genomic DNA flanked by recombinase-specific recognition sites, coupled with gene targeting to introduce the recombinase recognition sites at the desired genomic locations within the mouse genome. The introduction of multiple modifications at the same locus often requires use of multiple recombination systems. The most commonly used recombination system is Cre/lox. We here evaluated in vivo the ability of PhiC31 phage integrase to induce a genomic deletion in mouse. We engineered a self-excision cassette, modeled after one previously designed for Cre, containing a positive selection marker and PhiC31 driven by a testis-specific promoter, all flanked by PhiC31 specific attP/B sites. We found in vivo PhiC31 mediated self-excision in 38% of transmitted alleles, although 18% of these showed evidence of imprecise deletion. Furthermore, in the 69% of un-recombined cassettes, sequence analysis revealed that PhiC31 mediated an intra-molecular deletion of the attB site preventing any subsequent recombination. This study demonstrates that PhiC31 can be used to automatically remove Neo, in the male chimera germline, although it is not as efficient or as accurate as Cre.

Role of the N-terminal domain of phiC31 integrase in attB-attP synapsis

PhiC31 integrase is a serine recombinase containing an N-terminal domain (NTD) that provides catalytic activity and a large C-terminal domain that controls which pair of DNA substrates is able to synapse. We show here that substitutions in amino acid V129 in the NTD can lead to defects in synapsis and DNA cleavage, indicating that the NTD also has an important role in synapsis.

A motif in the C-terminal domain of phiC31 integrase controls the directionality of recombination

Bacteriophage ϕC31 encodes an integrase, which acts on the phage and host attachment sites, attP and attB, to form an integrated prophage flanked by attL and attR. In the absence of accessory factors, ϕC31 integrase cannot catalyse attL x attR recombination to excise the prophage. To understand the mechanism of directionality, mutant integrases were characterized that were active in excision. A hyperactive integrase, Int E449K, gained the ability to catalyse attL x attR, attL x attL and attR x attR recombination whilst retaining the ability to recombine attP x attB. A catalytically defective derivative of this mutant, Int S12A, E449K, could form stable complexes with attP/attB, attL/attR, attL/attL and attR/attR under conditions where Int S12A only complexed with attP/attB. Further analysis of the Int E449K-attL/attR synaptic events revealed a preference for one of the two predicted synapse structures with different orientations of the attL/attR sites. Several amino acid substitutions conferring hyperactivity, including E449K, were localized to one face of a predicted coiled-coil motif in the C-terminal domain. This work shows that a motif in the C-terminal domain of ϕC31 integrase controls the formation of the synaptic interface in both integration and excision, possibly through a direct role in protein–protein interactions.