Real-time monitoring of rolling-circle amplification using a modified molecular beacon design

Design and Optimization of Isothermal Gene Amplification for Generation of High-Gain Oligonucleotide Products by MicroRNAs

Thermal cycling-based quantitative polymerase chain reaction (qPCR) represents the gold standard method for accurate and sensitive nucleic acid quantification in laboratory settings. However, its reliance on costly thermal cyclers limits the implementation of this technique for rapid point-of-care (POC) diagnostics. To address this, isothermal amplification techniques such as rolling circle amplification (RCA) have been developed, offering a simpler alternative that can operate without the need for sophisticated instrumentation. This study focuses on the development and optimization of toehold-mediated RCA (TRCA), which employs a conformationally switchable dumbbell DNA template for the sensitive and selective detection of cancer-associated miRNAs, specifically miR-21. In addition, we developed variants of hyperbranched TRCA (HTRCA), nicking-assisted TRCA (NTRCA), and hyperbranched NTRCA (HNTRCA) to facilitate exponential amplification by enhancing TRCA through the sequential incorporation of reverse primer (Pr) and nicking endonuclease (nE). By conducting a systematic kinetic analysis of the initial rate and end point signals for varying concentrations of key reaction components, we could identify optimal conditions that markedly enhanced the sensitivity and specificity of the TRCA variants. In particular, HNTRCA, which exploits the synergistic effect of Pr and nE, demonstrated an approximately 3000-fold improvement in the detection limit (260 fM) and a wider dynamic range of more than 4 log orders of magnitude compared to TRCA, thereby evidencing its superior performance. Also, we established a mechanistic model for TRCA that includes the roles of Pr and nE in different amplification processes. Model parameters were fitted to the experimental data, and additional simulations were conducted to compare the four amplification methods. Further tests with real biological samples revealed that this technique showed a good correlation with qPCR in quantifying miR-21 expression in various cell lines (0.9510 of Pearson's r), confirming its potential as a robust and rapid tool for nucleic acid detection. Therefore, the simplicity, high sensitivity, and potential for integration with POC diagnostic platforms make the HNTRCA system suitable for field deployment in resource-limited environments.

Split Probe-Induced Protein Translational Amplification for Nucleic Acid Detection

Nucleic acid detection is important in a wide range of applications, including disease diagnosis, genetic testing, biotechnological research, environmental monitoring, and forensic science. However, the application of nucleic acid detection in various fields is hindered by the lack of sensitive, accurate, and inexpensive methods. This study introduces a simple approach to enhance the sensitivity for the accurate detection of nucleic acids. Our approach combined a split-probe strategy with in vitro translational amplification of reporter protein for signal generation to detect nucleic acids with high sensitivity and selectivity. This approach enables target-mediated translational amplification of reporter proteins by linking split probes in the presence of a target microRNA (miRNA). In particular, the fluorescence split-probe sensor adopts a reporter protein with various fluorescence wavelength regions, enabling the simultaneous detection of multiple target miRNAs. Moreover, luminescence detection by merely altering the reporter protein sequence can substantially enhance the sensitivity of detection of target miRNAs. Using this system, we analyzed and quantified target miRNAs in the total RNA extracted from cell lines and cell-derived extracellular vesicles with high specificity and accuracy. This split-probe sensor has potential as a powerful tool for the simple, sensitive, and specific detection of various target nucleic acids.

Accurate quantification of DNA content in DNA hydrogels prepared by rolling circle amplification

Accurate quantification of polymerized DNA in rolling circle amplification (RCA)-based hydrogels is challenging due to the high viscosity of these materials, however, it can be achieved with a photometric nucleotide depletion assay or qPCR. We show that the DNA content strongly depends on the template sequence and correlates with the mechanical properties of the hydrogels.

Construction of rolling circle amplification products-based pure nucleic acid nanostructures for biomedical applications

Nucleic acid nanomaterials with good biocompatibility, biodegradability, and programmability have important applications in biomedical field. Nucleic acid nanomaterials are usually combined with some inorganic nanomaterials to improve their biological stability. However, undefined toxic side effects of composite nanocarriers hamper their application in vivo. As a nanotool capable of avoiding potential biotoxicity, nanostructures composed entirely of DNA oligonucleotides have been rapidly developed in the field of biomedicine in recent years. Rolling circle amplification (RCA) is an isothermal enzymatic nucleic acid amplification technology for large-scale production of periodic DNA/RNA with pre-designed desirable structures and functions. RCA products with different functional parts can be customized by changing the sequence of the circular template, thereby generating complex multifunctional DNA nanostructures, such as DNA nanowire, nanoflower, origami, nanotube, nanoribbon, etc. More importantly, RCA products as nonnicked building blocks can enhance the biostability of DNA nanostructures, especially in vivo. These RCA products-based nucleic acid nanostructures can be used as scaffolds or nanocarriers to interact or load with metal nanoparticles, proteins, lipids, cationic polymers, therapeutic nucleic acids or drugs, etc. This paper reviews the assembly strategies of RCA based DNA nanostructures with different shape and their applications in biosensing, bioimaging and biomedicine. Finally, the development prospects of the nucleic acid nanomaterials in clinical diagnosis and treatment of diseases are described. STATEMENT OF SIGNIFICANCE: As a nanotool capable of avoiding potential biotoxicity, nanostructures composed entirely of DNA oligonucleotides have been rapidly developed in the field of biomedicine in recent years. Rolling circle amplification (RCA) is an isothermal enzymatic nucleic acid amplification technology for large-scale production of periodic DNA/RNA with pre-designed desirable structures and functions. This paper reviews the construction of various shapes of pure nucleic acid nanomaterials based on RCA products and their applications in biosensing, bioimaging and biomedicine. This will promote the development of biocompatible DNA nanovehicles and their further application in living systems, including bioimaging, molecular detection, disease diagnosis and drug delivery, finally producing a significant impact in the field of nanotechnology and nanomedicine.

A persistent luminescence resonance energy transfer-based molecular beacon probe for the highly sensitive detection of microRNA in biological samples

Herein, a time-resolved luminescence resonance energy transfer (TR-LRET) molecular beacon (MB) probe employing persistent luminescence nanoparticles (PLNPs) as the energy donors was first constructed, and further designed for microRNA21 (miR21) sensing. This probe (named as PLNPs-MB) was facilely fabricated by covalent bioconjugation between poly-(acrylic acid) (PAA) modified near-infrared (NIR) emissive PLNPs i.e. ZnGa₂O₄:Cr³⁺ and functionalized MB oligonucleotide (5'-NH₂ and 3'-BHQ3). Accordingly, PLNPs and BHQ3 were in close proximity to each other, leading to the occurrence of LRET and obvious persistent luminescence (PL) quenching. In the presence of miR21, loop of the PLNP-MB was hybridized, accompanying BHQ3 away from PLNPs and the restraint of LRET process. As a result, PL of the PLNPs was recovered, which built the foundation of miR21 quantification. The probe provided a linear response range from 0.1 to 10 nM for miR21 detection. Quantification limit of this probe was competitive and about 1-2 orders of magnitude lower than that of other reported MB probes for nucleic acid. Moreover, the proposed probe was successfully adopted for miR21 detection in biological fluids (human serum, cell extraction). This work also provided a sensitive detection nanoplatform for other targets through modifying diverse MBs onto the surface of PLNPs.

Functional nucleic acid biosensors utilizing rolling circle amplification

Functional nucleic acids regulate rolling circle amplification to produce multiple detection outputs suitable for the development of point-of-care diagnostic devices.

Lab-on-a-Chip Devices for Point-of-Care Medical Diagnostics

The recent coronavirus (COVID-19) pandemic has underscored the need to move from traditional lab-centralized diagnostics to point-of-care (PoC) settings. Lab-on-a-chip (LoC) platforms facilitate the translation to PoC settings via the miniaturization, portability, integration, and automation of multiple assay functions onto a single chip. For this purpose, paper-based assays and microfluidic platforms are currently being extensively studied, and much focus is being directed towards simplifying their design while simultaneously improving multiplexing and automation capabilities. Signal amplification strategies are being applied to improve the performance of assays with respect to both sensitivity and selectivity, while smartphones are being integrated to expand the analytical power of the technology and promote its accessibility. In this chapter, we review the main technologies in the field of LoC platforms for PoC medical diagnostics and survey recent approaches for improving these assays.

Signal-on electrochemical DNA (E-DNA) sensor for accurate quantification of nicking-assisted rolling circle amplification (N-RCA) products with attomolar sensitivity

Rolling circle amplification (RCA) has become an increasingly important amplification technique in nucleic acid analysis, immunoassay, and molecular diagnosis due to its high specificity and sensitivity. However, the accurate quantification of RCA products via the extensively used fluorescent signaling method has been challenged primarily by the non-specific and sequence-independent binding of the fluorescent dyes to DNA. Here, we have developed a signal-on E-DNA sensor for accurate quantification of the RCA products with high specificity and sensitivity. A restriction enzyme was introduced to cleave the long tandem repeat sequences generated in the RCA reaction into many short monomers. The short monomers were then used as secondary targets to trigger the E-DNA sensor to produce an amplified redox current and thus the resulting RCA products were detected. The method was successfully applied to the detection of miR-7a with high specificity and the detection limit was as low as 0.59 fM.

Virus Detection: A Review of the Current and Emerging Molecular and Immunological Methods

Viruses are ubiquitous in the environment. While many impart no deleterious effects on their hosts, several are major pathogens. This risk of pathogenicity, alongside the fact that many viruses can rapidly mutate highlights the need for suitable, rapid diagnostic measures. This review provides a critical analysis of widely used methods and examines their advantages and limitations. Currently, nucleic-acid detection and immunoassay methods are among the most popular means for quickly identifying viral infection directly from source. Nucleic acid-based detection generally offers high sensitivity, but can be time-consuming, costly, and require trained staff. The use of isothermal-based amplification systems for detection could aid in the reduction of results turnaround and equipment-associated costs, making them appealing for point-of-use applications, or when high volume/fast turnaround testing is required. Alternatively, immunoassays offer robustness and reduced costs. Furthermore, some immunoassay formats, such as those using lateral-flow technology, can generate results very rapidly. However, immunoassays typically cannot achieve comparable sensitivity to nucleic acid-based detection methods. Alongside these methods, the application of next-generation sequencing can provide highly specific results. In addition, the ability to sequence large numbers of viral genomes would provide researchers with enhanced information and assist in tracing infections.

Single-copy detection of somatic variants from solid and liquid biopsy

Accurate detection of somatic variants, against a background of wild-type molecules, is essential for clinical decision making in oncology. Existing approaches, such as allele-specific real-time PCR, are typically limited to a single target gene and lack sensitivity. Alternatively, next-generation sequencing methods suffer from slow turnaround time, high costs, and are complex to implement, typically limiting them to single-site use. Here, we report a method, which we term Allele-Specific PYrophosphorolysis Reaction (ASPYRE), for high sensitivity detection of panels of somatic variants. ASPYRE has a simple workflow and is compatible with standard molecular biology reagents and real-time PCR instruments. We show that ASPYRE has single molecule sensitivity and is tolerant of DNA extracted from plasma and formalin fixed paraffin embedded (FFPE) samples. We also demonstrate two multiplex panels, including one for detection of 47 EGFR variants. ASPYRE presents an effective and accessible method that simplifies highly sensitive and multiplexed detection of somatic variants.

In situ rolling circle amplification surface modifications to improve E. coli O157:H7 capturing performances for rapid and sensitive microfluidic detection applications

We investigated the application of rolling circle amplification (RCA) to modify microfluidic channels for potential sensitive detection applications. To this end, a novel in situ capturing RCA (cRCA) strategy was used to modify the inner surfaces of microfluidic channels with cRCA products that featured repeating tandem capturing aptamers specific for E. coli O157:H7 cells. We showed that the in situ cRCA reaction modified microfluidic channels demonstrated significantly enhanced capturing efficiency in a wide range of flow rates when compared with the unit-aptamer approach. We demonstrated for the first time that microfluidic surfaces modified with the in situ cRCA products showed peak capturing performances both in terms of target capturing efficiency and specificity, and this was likely due to unexpected base-pairing that resulted in altered secondary structures of the capturing aptamers. Our data suggest that the in situ cRCA surface modification is a promising strategy to improve capturing performances in microfluidic devices in sensitive detection applications that also require high throughput. However, cRCA reaction conditions, particularly reaction time and concentrations of initial circular template, must be carefully investigated before the potentials of the in situ cRCA surface modification approach can be fully realized.

Laboratory testing of SARS-CoV, MERS-CoV, and SARS-CoV-2 (2019-nCoV): Current status, challenges, and countermeasures

Emerging and reemerging infectious diseases are global public concerns. With the outbreak of unknown pneumonia in Wuhan, China in December 2019, a new coronavirus, SARS-CoV-2 has been attracting tremendous attention. Rapid and accurate laboratory testing of SARS-CoV-2 is essential for early discovery, early reporting, early quarantine, early treatment, and cutting off epidemic transmission. The genome structure, transmission, and pathogenesis of SARS-CoV-2 are basically similar to SARS-CoV and MERS-CoV, the other two beta-CoVs of medical importance. During the SARS-CoV and MERS-CoV epidemics, a variety of molecular and serological diagnostic assays were established and should be referred to for SARS-CoV-2. In this review, by summarizing the articles and guidelines about specimen collection, nucleic acid tests (NAT) and serological tests for SARS-CoV, MERS-CoV, and SARS-CoV-2, several suggestions are put forward to improve the laboratory testing of SARS-CoV-2. In summary, for NAT: collecting stool and blood samples at later periods of illness to improve the positive rate if lower respiratory tract specimens are unavailable; increasing template volume to raise the sensitivity of detection; putting samples in reagents containing guanidine salt to inactivate virus as well as protect RNA; setting proper positive, negative and inhibition controls to ensure high-quality results; simultaneously amplifying human RNase P gene to avoid false-negative results. For antibody test, diverse assays targeting different antigens, and collecting paired samples are needed.

Rolling Circle Amplification-Based Polyvalent Molecular Beacon Probe-Assisted Signal Amplification Strategies for Sensitive Detection of B16 Cells

We developed a simple and sensitive signal amplification method for the detection of B16 cells based on the combination of rolling circle amplification (RCA) and molecular beacons (MBs). A long-chain structure of DNA synthesized by RCA was used to turn on aptamer-based MBs. Because of the multiple complementary repeat units, the RCA scaffold hybridized tens or hundreds of MBs to form polyvalent aptamer probes. The unfold ability and the fluorescence intensity of MBs were both improved by RCA, as compared to short single chains. The cell experiment results demonstrated that RCA-based polyvalent MBs were significantly more effective than monovalent MBs in targeting B16 cells and signal sensitivity because of their multivalent effects. The establishment of this strategy would provide a powerful platform for early clinical diagnostics of cancer cells.

Lab-on-a-Chip Devices for Point-of-Care Medical Diagnostics

The recent coronavirus (COVID-19) pandemic has underscored the need to move from traditional lab-centralized diagnostics to point-of-care (PoC) settings. Lab-on-a-chip (LoC) platforms facilitate the translation to PoC settings via the miniaturization, portability, integration, and automation of multiple assay functions onto a single chip. For this purpose, paper-based assays and microfluidic platforms are currently being extensively studied, and much focus is being directed towards simplifying their design while simultaneously improving multiplexing and automation capabilities. Signal amplification strategies are being applied to improve the performance of assays with respect to both sensitivity and selectivity, while smartphones are being integrated to expand the analytical power of the technology and promote its accessibility. In this chapter, we review the main technologies in the field of LoC platforms for PoC medical diagnostics and survey recent approaches for improving these assays.

Optomagnetic Detection of Rolling Circle Amplification Products

Rolling circle amplification (RCA) of a synthetic nucleic acid target is detected using magnetic nanoparticles (MNPs) combined with an optomagnetic (OM) readout. Two RCA assays are developed with on-chip detection of rolling circle products (RCPs) either at end-point where MNPs are mixed with the sample after completion of RCA or in real time where MNPs are mixed with the sample during RCA. The plastic chip acts as a cuvette, which is positioned in a setup integrated with temperature control and simultaneous detection of four parallel DNA hybridization reactions between functionalized MNPs and products of DNA amplification. The OM technique probes the small-angle rotation of MNPs bearing oligonucleotide probes complementary to the repeated nucleotide sequence of the RCPs. This rotation is restricted when MNPs bind to RCPs, which can be observed as a turn-off of the signal from MNPs that are free to rotate. The amount of MNPs bound to RCPs is found to increase in response to the amplification time as well as in response to the synthetic DNA target concentration (2-40 pM dynamic range). We report OM real-time results obtained with MNPs present during RCA and compare to relevant end-point OM results for RCPs generated for different RCA times. The real-time approach avoids opening of tubes post-RCA and thus reduces risk of lab contamination with amplification products without compromising the sensitivity and dynamic range of the assay.

Simultaneous Detection of Different Zika Virus Lineages via Molecular Computation in a Point-of-Care Assay

We have developed a generalizable “smart molecular diagnostic” capable of accurate point-of-care (POC) detection of variable nucleic acid targets. Our isothermal assay relies on multiplex execution of four loop-mediated isothermal amplification reactions, with primers that are degenerate and redundant, thereby increasing the breadth of targets while reducing the probability of amplification failure. An easy-to-read visual answer is computed directly by a multi-input Boolean OR logic gate (gate output is true if either one or more gate inputs is true) signal transducer that uses degenerate strand exchange probes to assess any combination of amplicons. We demonstrate our methodology by using the same assay to detect divergent Asian and African lineages of the evolving Zika virus (ZIKV), while maintaining selectivity against non-target viruses. Direct analysis of biological specimens proved possible, with crudely macerated ZIKV-infected Aedes aegypti mosquitoes being identified with 100% specificity and sensitivity. The ease-of-use with minimal instrumentation, broad programmability, and built-in fail-safe reliability make our smart molecular diagnostic attractive for POC use.

In Situ Detection of Adenovirus DNA and mRNA in Individual Cells

Infection by DNA viruses such as human adenoviruses (HAdVs) causes a high-level accumulation of viral DNA and mRNA in the cell population. However, the average viral DNA and mRNA content in a heterogeneous cell population does not inevitably reflect the abundance in individual cells. As the vast majority of virus infection studies is carried out using standard experimental procedures with heterogeneous cell populations, there is a need for a method allowing simultaneous detection and quantitative analysis of viral genome accumulation and gene expression in individual infected cells within a population. This article describes a padlock probe-based rolling-circle amplification protocol that allows simultaneous detection of HAdV type 5 (HAdV-5) DNA and various virus-encoded mRNAs, as well as quantitative analysis of HAdV-5 DNA copies and mRNA species, in individual cells within a heterogeneous population. This versatile method can be used to detect the extent of pathogenic DNA virus infection in different cell types over prolonged infection times. Furthermore, simultaneous viral DNA and mRNA quantification in individual cells allows identification of cells in which persistent infections may be established. © 2018 by John Wiley & Sons, Inc.

Research Progress on Rolling Circle Amplification (RCA)-Based Biomedical Sensing

Enhancing the limit of detection (LOD) is significant for crucial diseases. Cancer development could take more than 10 years, from one mutant cell to a visible tumor. Early diagnosis facilitates more effective treatment and leads to higher survival rate for cancer patients. Rolling circle amplification (RCA) is a simple and efficient isothermal enzymatic process that utilizes nuclease to generate long single stranded DNA (ssDNA) or RNA. The functional nucleic acid unit (aptamer, DNAzyme) could be replicated hundreds of times in a short period, and a lower LOD could be achieved if those units are combined with an enzymatic reaction, Surface Plasmon Resonance, electrochemical, or fluorescence detection, and other different kinds of biosensor. Multifarious RCA-based platforms have been developed to detect a variety of targets including DNA, RNA, SNP, proteins, pathogens, cytokines, micromolecules, and diseased cells. In this review, improvements in using the RCA technique for medical biosensors and biomedical applications were summarized and future trends in related research fields described.

Interlinked DNA nano-circles for measuring topoisomerase II activity at the level of single decatenation events

DNA nano-structures present appealing new means for monitoring different molecules. Here, we demonstrate the assembly and utilization of a surface-attached double-stranded DNA catenane composed of two intact interlinked DNA nano-circles for specific and sensitive measurements of the life essential topoisomerase II (Topo II) enzyme activity. Topo II activity was detected via the numeric release of DNA nano-circles, which were visualized at the single-molecule level in a fluorescence microscope upon isothermal amplification and fluorescence labeling. The transition of each enzymatic reaction to a micrometer sized labeled product enabled quantitative detection of Topo II activity at the single decatenation event level rendering activity measurements in extracts from as few as five cells possible. Topo II activity is a suggested predictive marker in cancer therapy and, consequently, the described highly sensitive monitoring of Topo II activity may add considerably to the toolbox of individualized medicine where decisions are based on very sparse samples.

Recent advances in signal amplification strategy based on oligonucleotide and nanomaterials for microRNA detection-a review

MicroRNAs (MiRNAs) play multiple crucial regulating roles in cell which can regulate one third of protein-coding genes. MiRNAs participate in the developmental and physiological processes of human body, while their aberrant adjustment will be more likely to trigger diseases such as cancers, kidney disease, central nervous system diseases, cardiovascular diseases, diabetes, viral infections and so on. What's worse, for the detection of miRNAs, their small size, high sequence similarity, low abundance and difficult extraction from cells impose great challenges in the analysis. Hence, it's necessary to fabricate accurate and sensitive biosensing platform for miRNAs detection. Up to now, researchers have developed many signal-amplification strategies for miRNAs detection, including hybridization chain reaction, nuclease amplification, rolling circle amplification, catalyzed hairpin assembly amplification and nanomaterials based amplification. These methods are typical, feasible and frequently used. In this review, we retrospect recent advances in signal amplification strategies for detecting miRNAs and point out the pros and cons of them. Furthermore, further prospects and promising developments of the signal-amplification strategies for detecting miRNAs are proposed.

Graphene Nanoprobes for Real-Time Monitoring of Isothermal Nucleic Acid Amplification

Isothermal amplification is an efficient way to amplify DNA with high accuracy; however, the real-time monitoring for quantification analysis mostly relied on expensive and precisely designed probes. In the present study, a graphene oxide (GO)-based nanoprobe was used to real-time monitor the isothermal amplification process. The interaction between GO and different DNA structures was systematically investigated, including single-stranded DNA (ssDNA), double-stranded DNA (dsDNA), DNA 3-helix, and long rolling circle amplification (RCA) and hybridization chain reaction (HCR) products, which existed in one-, two-, and three-dimensional structures. It was found that the high rigid structures exhibited much lower affinity with GO than soft ssDNA, and generally the rigidity was dependent on the length of targets and the hybridization position with probe DNA. On the basis of these results, we successfully monitored HCR amplification process, RCA process, and the enzyme restriction of RCA products with GO nanoprobe; other applications including the detection of the assembly/disassembly of DNA 3-helix structures were also performed. Compared to the widely used end-point detection methods, the GO-based sensing platform is simple, sensitive, cost-effective, and especially in a real-time monitoring mode. We believe such studies can provide comprehensive understandings and evocation on design of GO-based biosensors for broad application in various fields.

Double-loop hairpin probe and doxorubicin-loaded gold nanoparticles for the ultrasensitive electrochemical sensing of microRNA

An electrochemical microRNA (miRNA) analysis platform by combining double-loop hairpin probe (DHP) and doxorubicin-loaded gold nanoparticles (AuNPs@Dox) for ultrasensitive miRNA detection is proposed. Firstly, we here report a DHP that is simultaneously engineered to incorporate a miRNA recognition sequence, an output segment and output's complementary fragment. The important aspect of this hairpin probe is that it would not be degraded by duplex specific nuclease (DSN) and circumvents elaborately chemical modification disadvantages encountered by classic molecular beacon. For the DHP-based DSN signal amplification system, DHP hybridizes with target miRNA to form DNA-miRNA heteroduplexes, and the DSN can hydrolyze the DNA in the heteroduplexes structure selectively, while released target miRNA strand can initiate another cycle resulting in a significant signal amplification and the accumulated output segments could be responsible for strand displacement on the electrode directly. Furthermore, a great deal of doxorubicin (Dox) are loaded on the gold nanoparticles (AuNPs) to fabricate the AuNPs@Dox biocomposites that could magnify the electrochemical signal and enable the ultrasensitive analysis of miRNA. As a result, the miRNA was capable of being detected in a limit of 0.17pM and other kinds of miRNA were discriminated facilely by this method. The described DHP as a toolbox and the nano-biocomposites as a novel signal material would not only promote the design of electrochemical biosensors but also open a good way to promote the establishment of test method in malignant tumors.

Optimized Detection of Plasmodium falciparum Topoisomerase I Enzyme Activity in a Complex Biological Sample by the Use of Molecular Beacons

The so-called Rolling Circle Amplification allows for amplification of circular DNA structures in a manner that can be detected in real-time using nucleotide-based molecular beacons that unfold upon recognition of the DNA product, which is being produced during the amplification process. The unfolding of the molecular beacons results in a fluorescence increase as the Rolling Circle Amplification proceeds. This can be measured in a fluorometer. In the current study, we have investigated the possibility of using two different molecular beacons to detect two distinct Rolling Circle Amplification reactions proceeding simultaneously and in the same reaction tube by measurement of fluorescence over time. We demonstrate the application of this fluorometric readout method, for automated and specific detection of the activity of the type IB topoisomerase from the malaria parasite Plasmodium falciparum in the presence of human cell extract containing the related topoisomerase I from humans. The obtained results point towards a future use of the presented assay setup for malaria diagnostics or drug screening purposes. In longer terms the method may be applied more broadly for real-time sensing of various Rolling Circle Amplification reactions.

Assessment for Melting Temperature Measurement of Nucleic Acid by HRM

High resolution melting (HRM), with a high sensitivity to distinguish the nucleic acid species with small variations, has been widely applied in the mutation scanning, methylation analysis, and genotyping. For the aim of extending HRM for the evaluation of thermal stability of nucleic acid secondary structures on sequence dependence, we investigated effects of the dye of EvaGreen, metal ions, and impurities (such as dNTPs) on melting temperature (T_m ) measurement by HRM. The accuracy of HRM was assessed as compared with UV melting method, and little difference between the two methods was found when the DNA T_m was higher than 40°C. Both insufficiency and excessiveness of EvaGreen were found to give rise to a little bit higher T_m , showing that the proportion of dye should be considered for precise T_m measurement of nucleic acids. Finally, HRM method was also successfully used to measure T_m s of DNA triplex, hairpin, and RNA duplex. In conclusion, HRM can be applied in the evaluation of thermal stability of nucleic acid (DNA or RNA) or secondary structural elements (even when dNTPs are present).

G-quadruplex fluorescent probe-mediated real-time rolling circle amplification strategy for highly sensitive microRNA detection

Real-time PCR has revolutionized PCR from qualitative to quantitative. As an isothermal DNA amplification technique, rolling circular amplification (RCA) has been demonstrated to be a versatile tool in many fields. Development of a simple, highly sensitive, and specific strategy for real-time monitoring of RCA will increase its usefulness in many fields. The strategy reported here utilized the specific fluorescence response of thioflavin T (ThT) to G-quadruplexes formed by RCA products. Such a real-time monitoring strategy works well in both traditional RCA with linear amplification efficiency and modified RCA proceeded in an exponential manner, and can be readily performed in commercially available real-time PCR instruments, thereby achieving high-throughput detection and making the proposed technique more suitable for biosensing applications. As examples, real-time RCA-based sensing platforms were designed and successfully used for quantitation of microRNA over broad linear ranges (8 orders of magnitude) with a detection limit of 4 aM (or 0.12 zmol). The feasibility of microRNA analysis in human lung cancer cells was also demonstrated. This work provides a new method for real-time monitoring of RCA by using unique nucleic acid secondary structures and their specific fluorescent probes. It has the potential to be extended to other isothermal single-stranded DNA amplification techniques.

Lack of correlation between reaction speed and analytical sensitivity in isothermal amplification reveals the value of digital methods for optimization: validation using digital real-time RT-LAMP

In this paper, we asked if it is possible to identify the best primers and reaction conditions based on improvements in reaction speed when optimizing isothermal reactions. We used digital single-molecule, real-time analyses of both speed and efficiency of isothermal amplification reactions, which revealed that improvements in the speed of isothermal amplification reactions did not always correlate with improvements in digital efficiency (the fraction of molecules that amplify) or with analytical sensitivity. However, we observed that the speeds of amplification for single-molecule (in a digital device) and multi-molecule (e.g. in a PCR well plate) formats always correlated for the same conditions. Also, digital efficiency correlated with the analytical sensitivity of the same reaction performed in a multi-molecule format. Our finding was supported experimentally with examples of primer design, the use or exclusion of loop primers in different combinations, and the use of different enzyme mixtures in one-step reverse-transcription loop-mediated amplification (RT-LAMP). Our results show that measuring the digital efficiency of amplification of single-template molecules allows quick, reliable comparisons of the analytical sensitivity of reactions under any two tested conditions, independent of the speeds of the isothermal amplification reactions.

Synthetic genetic polymers: advances and applications

Advances and applications of synthetic genetic polymers (xeno-nucleic acids) are reviewed in this article. The types of synthetic genetic polymers are summarized. The basic properties of them are elaborated and their technical applications are presented. Challenges and prospects of synthetic genetic polymers are discussed.

Real-time quantitative nicking endonuclease-mediated isothermal amplification with small molecular beacons

This nicking endonuclease-mediated isothermal amplification with small molecular beacons (SMB-NEMA) method allows the simple, specific and sensitive assessment of isothermal DNA quantification.

Formation of Silver Nanostructures by Rolling Circle Amplification Using Boranephosphonate-Modified Nucleotides

We investigate the efficiency of incorporation of boranephosphonate-modified nucleotides by phi29 DNA polymerase and present a simple method for forming large defined silver nanostructures by rolling circle amplification (RCA) using boranephosphonate internucleotide linkages. RCA is a linear DNA amplification technique that can use specifically circularized DNA probes for detection of target nucleic acids and proteins. The resulting product is a collapsed single-stranded DNA molecule with tandem repeats of the DNA probe. By substituting each of the natural nucleotides with the corresponding 5'-(α-P-borano)deoxynucleosidetriphosphate, only a small reduction in amplification rate is observed. Also, by substituting all four natural nucleotides, it is possible to enzymatically synthesize a micrometer-sized, single-stranded DNA molecule with only boranephosphonate internucleotide linkages. Well-defined silver particles are then readily formed along the rolling circle product.

Rationally designed molecular beacons for bioanalytical and biomedical applications

Nucleic acids hold promise as biomolecules for future applications in biomedicine and biotechnology. Their well-defined structures and compositions afford unique chemical properties and biological functions. Moreover, the specificity of hydrogen-bonded Watson-Crick interactions allows the construction of nucleic acid sequences with multiple functions. In particular, the development of nucleic acid probes as essential molecular engineering tools will make a significant contribution to advancements in biosensing, bioimaging and therapy. The molecular beacon (MB), first conceptualized by Tyagi and Kramer in 1996, is an excellent example of a double-stranded nucleic acid (dsDNA) probe. Although inactive in the absence of a target, dsDNA probes can report the presence of a specific target through hybridization or a specific recognition-triggered change in conformation. MB probes are typically fluorescently labeled oligonucleotides that range from 25 to 35 nucleotides (nt) in length, and their structure can be divided into three components: stem, loop and reporter. The intrinsic merit of MBs depends on predictable design, reproducibility of synthesis, simplicity of modification, and built-in signal transduction. Using resonance energy transfer (RET) for signal transduction, MBs are further endowed with increased sensitivity, rapid response and universality, making them ideal for chemical sensing, environmental monitoring and biological imaging, in contrast to other nucleic acid probes. Furthermore, integrating MBs with targeting ligands or molecular drugs can substantially support their in vivo applications in theranositics. In this review, we survey advances in bioanalytical and biomedical applications of rationally designed MBs, as they have evolved through the collaborative efforts of many researchers. We first discuss improvements to the three components of MBs: stem, loop and reporter. The current applications of MBs in biosensing, bioimaging and therapy will then be described. In particular, we emphasize recent progress in constructing MB-based biosensors in homogeneous solution or on solid surfaces. We expect that such rationally designed and functionalized MBs will open up new and exciting avenues for biological and medical research and applications.

Development of rolling circle amplification based surface-enhanced Raman spectroscopy method for 35S promoter gene detection

In this study, we developed the genetically modified organism detection method by using the combination of rolling circle amplification (RCA) and surface-enhanced Raman spectroscopy (SERS). An oligonucleotide probe which is specific for 35S DNA promoter target was immobilised onto the gold slide and a RCA reaction was performed. A self-assembled monolayer was formed on gold nanorods using 5,5'-dithiobis(2-nitrobenzoic acid) (DTNB) and the second probe of the 35S DNA promoter target was immobilised on the activated gold coated slide surfaces. Probes on the nanoparticles were hybridised with the target oligonucleotide. Quantification of the target concentration was performed via SERS spectra of DTNB on the nanorods. SERS spectra of target molecules were enhanced through the RCA reaction and the detection limit was found to be 6.3fM. The sensitivity of the developed RCA-SERS method was compared with another method which had been performed without using RCA reaction, and the detection limit was found to be 0.1pM. The correlation between the target concentration and the SERS signal was found to be linear, within the range of 1pM to 10nM for the traditional assay and 100fM to 100nM for the RCA assay. For the developed RCA-SERS assay, the specificity tests were performed using the 35S promoter of Bt-176 maize gene. It was found out that the developed RCA-SERS sandwich assay method is quite sensitive, selective and specific for target sequences in model and real systems.

Ultrasensitive genotyping with target-specifically generated circular DNA templates and RNA FRET probes

A RNA FRET probe-based signal amplification strategy is designed for ultrasensitive detection of RCA products coupled with thermal cycle-based ligation.

Real-time detection of H5N1influenza virus through hyperbranched rolling circle amplification

In the HRCA process, by replacing heat shock by pH shock, H₅N₁was detected at 9 fM more easily and safely.

Real-time monitoring of rolling circle amplification using aggregation-induced emission: applications in biological detection

Real-time monitoring of rolling circle amplification (RCA) was achieved by the super-aggregation of a tetraphenylethene dye QAPTE along single-stranded DNA products and consequent enhanced aggregation-induced emission, it can work for all RCA reactions.

Isothermal amplified detection of DNA and RNA

This review highlights various methods that can be used for a sensitive detection of nucleic acids without using thermal cycling procedures, as is done in PCR or LCR. Topics included are nucleic acid sequence-based amplification (NASBA), strand displacement amplification (SDA), loop-mediated amplification (LAMP), Invader assay, rolling circle amplification (RCA), signal mediated amplification of RNA technology (SMART), helicase-dependent amplification (HDA), recombinase polymerase amplification (RPA), nicking endonuclease signal amplification (NESA) and nicking endonuclease assisted nanoparticle activation (NENNA), exonuclease-aided target recycling, Junction or Y-probes, split DNAZyme and deoxyribozyme amplification strategies, template-directed chemical reactions that lead to amplified signals, non-covalent DNA catalytic reactions, hybridization chain reactions (HCR) and detection via the self-assembly of DNA probes to give supramolecular structures. The majority of these isothermal amplification methods can detect DNA or RNA in complex biological matrices and have great potential for use at point-of-care.

Detection of rotavirus using padlock probes and rolling circle amplification

Rotavirus infections are one of the most common reasons for hospitalizations due to gastrointestinal diseases. Rotavirus is often diagnosed by latex agglutination assay, chromatography immunoassay, or by electron microscopy, which are all quite insensitive. Reverse transcription polymerase chain reaction, on the other hand, is very sensitive to variations at the genomic level. We developed a novel assay based on a set of 58 different padlock probes with a detection limit of 1,000 copies. Twenty-two patient samples were analyzed and the assay showed high concordance with a PCR-based assay. In summary, we present a new assay for sensitive and variation tolerant detection of rotavirus.

A graphene-based biosensing platform based on the release of DNA probes and rolling circle amplification

We report a versatile biosensing platform capable of achieving ultrasensitive detection of both small-molecule and macromolecular targets. The system features three components: reduced graphene oxide for its ability to adsorb single-stranded DNA molecules nonspecifically, DNA aptamers for their ability to bind reduced graphene oxide but undergo target-induced conformational changes that facilitate their release from the reduced graphene oxide surface, and rolling circle amplification (RCA) for its ability to amplify a primer-template recognition event into repetitive sequence units that can be easily detected. The key to the design is the tagging of a short primer to an aptamer sequence, which results in a small DNA probe that allows for both effective probe adsorption onto the reduced graphene oxide surface to mask the primer domain in the absence of the target, as well as efficient probe release in the presence of the target to make the primer available for template binding and RCA. We also made an observation that the circular template, which on its own does not cause a detectable level of probe release from the reduced graphene oxide, augments target-induced probe release. The synergistic release of DNA probes is interpreted to be a contributing factor for the high detection sensitivity. The broad utility of the platform is illustrated though engineering three different sensors that are capable of achieving ultrasensitive detection of a protein target, a DNA sequence and a small-molecule analyte. We envision that the approach described herein will find useful applications in the biological, medical, and environmental fields.

Miniaturization applied to analysis of nucleic acids in heterogeneous tissues

Despite huge efforts in sample analysis, the measurement of marker nucleic acids within tissues remains largely nonquantitative. Gene analyses have benefited from sensitivity gains through in vitro gene amplification, including PCR. However, whilst these processes are intrinsically suited to highly reproducible, accurate and precise gene measurement, the term semiquantitative analysis is still commonly used, suggesting that other fundamental limitations preclude a generic quantitative basis to gene analysis. The most poorly defined aspect of gene analysis relates to the sample itself. The amount of cells and, particularly, cell subtype composition are rarely annotated before analysis; indeed, they are often extrapolated after analysis. To advance our understanding of pathogenesis, assay formats will benefit from resembling the dimensions of the cell, to assist in the analysis of cellular components of tissue complexes. This review is partly a perspective on how current miniaturization technologies, in association with molecular biology, microfluidics and surface chemistries, may evolve from the parts of a paradigm to enable the unambiguous quantitative analysis of complex biologic matter.