Combination of overlapping bacterial artificial chromosomes by a two-step recombinogenic engineering method

Back to BAC: the use of infectious clone technologies for viral mutagenesis

Bacterial artificial chromosome (BAC) vectors were first developed to facilitate the propagation and manipulation of large DNA fragments in molecular biology studies for uses such as genome sequencing projects and genetic disease models. To facilitate these studies, methodologies have been developed to introduce specific mutations that can be directly applied to the mutagenesis of infectious clones (icBAC) using BAC technologies. This has resulted in rapid identification of gene function and expression at unprecedented rates. Here we review the major developments in BAC mutagenesis in vitro. This review summarises the technologies used to construct and introduce mutations into herpesvirus icBAC. It also explores developing technologies likely to provide the next leap in understanding these important viruses.

Development and application of a PCR-targeted gene disruption method for studying CelR function in Thermobifida fusca

Thermobifida fusca is a high-G+C-content, thermophilic, Gram-positive soil actinobacterium with high cellulolytic activity. In T. fusca, CelR is thought to act as the primary regulator of cellulase gene expression by binding to a 14-bp inverted repeat [5'-(T)GGGAGCGCTCCC(A)] that is upstream of many known cellulase genes. Previously, the ability to study the roles and regulation of cellulase genes in T. fusca has been limited largely by a lack of established genetic engineering methods for T. fusca. In this study, we developed an efficient procedure for creating precise chromosomal gene disruptions and demonstrated this procedure by generating a celR deletion strain. The celR deletion strain was then characterized using measurements for growth behavior, cellulase activity, and gene expression. The celR deletion strain of T. fusca exhibited a severely crippled growth phenotype with a prolonged lag phase and decreased cell yields for growth on both glucose and cellobiose. While the maximum endoglucanase activity and cellulase activity were not significantly changed, the endoglucanase activity and cellulase activity per cell were highly elevated. Measurements of mRNA transcript levels in both the celR deletion strain and the wild-type strain indicated that the CelR protein potentially acts as a repressor for some genes and as an activator for other genes. Overall, we established and demonstrated a method for manipulating chromosomal DNA in T. fusca that can be used to study the cellulolytic capabilities of this organism. Components of this method may be useful in developing genetic engineering methods for other currently intractable organisms.

Efficient transfer of two large secondary metabolite pathway gene clusters into heterologous hosts by transposition

Horizontal gene transfer by transposition has been widely used for transgenesis in prokaryotes. However, conjugation has been preferred for transfer of large transgenes, despite greater restrictions of host range. We examine the possibility that transposons can be used to deliver large transgenes to heterologous hosts. This possibility is particularly relevant to the expression of large secondary metabolite gene clusters in various heterologous hosts. Recently, we showed that the engineering of large gene clusters like type I polyketide/nonribosomal peptide pathways for heterologous expression is no longer a bottleneck. Here, we apply recombineering to engineer either the epothilone (epo) or myxochromide S (mchS) gene cluster for transpositional delivery and expression in heterologous hosts. The 58-kb epo gene cluster was fully reconstituted from two clones by stitching. Then, the epo promoter was exchanged for a promoter active in the heterologous host, followed by engineering into the MycoMar transposon. A similar process was applied to the mchS gene cluster. The engineered gene clusters were transferred and expressed in the heterologous hosts Myxococcus xanthus and Pseudomonas putida. We achieved the largest transposition yet reported for any system and suggest that delivery by transposon will become the method of choice for delivery of large transgenes, particularly not only for metabolic engineering but also for general transgenesis in prokaryotes and eukaryotes.

CFTR expression from a BAC carrying the complete human gene and associated regulatory elements

The use of genomic DNA rather than cDNA or mini-gene constructs in gene therapy might be advantageous as these contain intronic and long-range control elements vital for accurate expression. For gene therapy of cystic fibrosis though, no bacterial artificial chromosome (BAC), containing the whole CFTR gene is available. We have used Red homologous recombination to add a to a previously described vector to construct a new BAC vector with a 250.3-kb insert containing the whole coding region of the CFTR gene along with 40.1 kb of DNA 5′ to the gene and 25 kb 3′ to the gene. This includes all the known control elements of the gene. We evaluated expression by RT-PCR in CMT-93 cells and showed that the gene is expressed both from integrated copies of the BAC and also from episomes carrying the oriP/EBNA-1 element. Sequencing of the human CFTR mRNA from one clone showed that the BAC is functional and can generate correctly spliced mRNA in the mouse background. The BAC described here is the only CFTR genomic construct available on a convenient vector that can be readily used for gene expression studies or in vivo studies to test its potential application in gene therapy for cystic fibrosis.

Defining the functional boundaries of the Gata2 locus by rescue with a linked bacterial artificial chromosome transgene

Transcription factor GATA-2 is vital for both hematopoietic progenitor cell function and urogenital patterning. Transgenic mapping studies have shown that the hematopoietic and urogenital enhancers are located hundreds of kbp 5' and 3' to the Gata2 structural gene, and both are vital for embryonic development. Because the size of mammalian genes, including all of their associated regulatory elements, can exceed a megabase, transgenic complementation in mice has, in specific instances, proven to be a formidable hurdle. After incorporating the Gata2 structural gene as well as the distant hematopoietic and urogenital enhancers into a single, contiguous piece of DNA by fusing two bacterial artificial chromosomes (BACs) into one, we formally tested the hypothesis that the functional boundaries of this locus are contained within this contiguous genomic span. We show that two independent lines of transgenic mice bearing a multicopy 413-kbp-linked Gata2 BAC transgene (bearing sequences from -187 to +226 kbp of the locus) are able to fully rescue Gata2 null mutant embryonic lethality and that the rescued animals behave and reproduce normally. Surprisingly, the linked BAC confers expression in the ureteric epithelium, whereas sequences within any of the overlapping parental BACs and a yeast artificial chromosome that were originally tested do not, and thus these experiments also define a novel synthetic enhancer activity that has not been previously described. These genetic complementation studies define the required outer limits of the Gata2 locus and formally demonstrate that enhancers lying beyond those boundaries are not necessary for Gata2-regulated viability or fecundity.

Factor VIII mRNA expression from a BAC carrying the intact locus made by homologous recombination

Hemophilia A is caused by mutations in the gene encoding factor VIII (F8) and is an important target for gene therapy. The F8 gene contains 26 exons spread over approximately 186 kb and no work using the intact genomic locus has been carried out. We have constructed a 250-kb BAC carrying all 26 exons, the introns, and more than 40 kb of upstream and 20 kb of downstream DNA. This F8 BAC was further retrofitted with either the oriP/EBNA-1 elements from Epstein-Barr virus, which allow episomal maintenance in mammalian cells, or alphoid DNA, which allows human artificial chromosome formation in some human cell lines. Lipofection of the oriP/EBNA-1-containing version into mouse Hepa1-6 cells resulted in expression of F8 mRNA spanning the F8 gene. The >300-kb BAC carrying alphoid DNA was successfully delivered to 293A and HT1080 cells using bacterial delivery, resulting in greater than endogenous levels of F8 mRNA expression.

Oligonucleotide probes containing polylysine residues for fabrication of DNA chips on various solid surfaces

Various materials, such as glass, plastic, metals, etc., are utilized for preparing DNA chips. In each particular case special approaches are used for immobilization of different oligonucleotide derivatives on the solid supports. We describe a general technique for DNA chips preparation on various unmodified surfaces using one type of oligonucleotide derivative, polylysine-oligonucleotide conjugates (PL-oligo). A long polyamine spacer in the PL-oligo conjugates provides a durable irreversible non-covalent immobilization onto a variety of solid supports and enough distance between oligonucleotides and the surface. The resulting DNA chips were shown to be useful for the detection of PCR DNA fragments and to be sensitive to single nucleotide discrepancies. They represent a promising instrument for revealing genetic diseases, genotyping viruses and bacteria, and for displaying their drug-resistant strains.

Assisted large fragment insertion by Red/ET-recombination (ALFIRE)--an alternative and enhanced method for large fragment recombineering

Functional genomics require manipulation and modification of large fragments of the genome. Such manipulation has only recently become more efficient due to the discovery of different techniques based on homologous recombination. However, certain limitations of these strategies still exist since insertion of homology arms (HAs) is often based on amplification of DNA sequences with PCR. Large quantities of PCR products longer than 4-5 kb can be difficult to obtain and the risk of mutations or mismatches increases with the size of the template that is being amplified. This can be overcome by adding HAs by conventional cloning techniques, but with large fragments such as entire genes the procedure becomes time-consuming and tedious. Second, homologous recombination techniques often require addition of antibiotic selection genes, which may not be desired in the final construct. Here, we report a method to overcome the size and selection marker limitations by a two- or three-step procedure. The method can insert any fragment into small or large episomes, without the need of an antibiotic selection gene. We have humanized the mouse luteinizing hormone receptor gene (Lhcgr) by inserting a approximately 55 kb fragment from a BAC clone containing the human Lhcgr gene into a 170 kb BAC clone comprising the entire mouse orthologue. The methodology is based on the rationale to introduce a counter-selection cassette flanked by unique restriction sites and HAs for the insert, into the vector that is modified. Upon enzymatic digestion, in vitro or in Escherichia coli, double-strand breaks are generated leading to recombination between the vector and the insert. The procedure described here is thus an additional powerful tool for manipulating large and complex genomic fragments.

Assessing the functional characteristics of synonymous and nonsynonymous mutation candidates by use of large DNA constructs

As we identify more and more genetic changes, either through mutation studies or population screens, we need powerful tools to study their potential molecular effects. With these tools, we can begin to understand the contributions of genetic variations to the wide range of human phenotypes. We used our catalogue of molecular changes in patients with carbamyl phosphate synthetase I (CPSI) deficiency to develop such a system for use in eukaryotic cells. We developed the tools and methods for rapidly modifying bacterial artificial chromosomes (BACs) for eukaryotic episomal replication, marker expression, and selection and then applied this protocol to a BAC containing the entire CPSI gene. Although this CPSI BAC construct was suitable for studying nonsynonymous mutations, potential splicing defects, and promoter variations, our focus was on studying potential splicing and RNA-processing defects to validate this system. In this article, we describe the construction of this system and subsequently examine the mechanism of four putative splicing mutations in patients deficient in CPSI. Using this model, we also demonstrate the reversible role of nonsense-mediated decay in all four mutations, using small interfering RNA knockdown of hUPF2. Furthermore, we were able to locate cryptic splicing sites for the two intronic mutations. This BAC-based system permits expression studies in the absence of patient RNA or tissues with relevant gene expression and provides experimental flexibility not available in genomic DNA or plasmid constructs. Our splicing and RNA degradation data demonstrate the advantages of using whole-gene constructs to study the effects of sequence variation on gene expression and function.

A general method to modify BACs to generate large recombinant DNA fragments

Bacterial artificial chromosome (BAC) has the capacity to clone DNA fragments in excess of 300 kb. It also has the considerable advantages of stable propagation and ease of purification. These features make BAC suitable in genetic research, such as library construction, transgenic mice production, and gene targeting constructs. Homologous recombination in Escherichia coli, a process named recombineering, has made the modification of BACs easy and reliable. We report here a modified recombineering method that can efficiently mediate the fusion of large DNA fragments from two or more different BACs. With the introduction of kanamycin-resistant gene and proposed rare-cutting restriction endonuclease (RCRE) sites into two BACs, a 82.6-kb DNA fragment containing the inverted human alpha-globin genes (theta, alpha1, alpha2, and zeta) from BAC191K2 and the locus control region (LCR) of human beta-globin gene locus (from the BAC186D7) was reconstructed. This approach for combining different BAC DNA fragments should facilitate many kinds of genomic experiments.

[Functionalized nanocomposite coating of a glass surface for oligonucleotide immobilization]

A new type of coating for manufacturing DNA chips was constructed of the basis of an organic-inorganic nanocomposite based on the polyvinylbutyral-tetraethoxysilane copolymer. The organosilicon composite was functionalized by introduction of ethanolamine vinyl ether copolymers, which contain amino groups and anchor vinyloxide units capable of reacting with silanol groups of the nanocomposite. The resulting coatings form a film on glass slides with a high surface density of amino groups (up to 700 groups/nm2) suitable for three-dimensional immobilization of oligonucleotides. The use of bifunctional reagents (e.g., phenylene diisothiocyanate) for the attachment of oligonucleotides bearing amino linkers to the amino-containing surface provides an immobilization density of 0.5-1.6 pmol/mm2. Immobilization with a higher density (10-12 pmol/mm2) was achieved for attachment to amino-containing glass slides upon the use of oligonucleotides containing selectively activated terminal phosphate groups. The activation of oligonucleotides was carried out with the triphenylphosphine-dithiodipyridine pair in the presence of dimethylaminopyridine N-oxide. The resulting DNA chips were shown to be useful in principle for DNA detection.

Hybridisation of surface-immobilised single-stranded oligonucleotides and polymer monitored by surface plasmon resonance

We have investigated the hybridisation of thiol-modified single-stranded DNA embedded in a polyacrylamide layer through the technique of surface plasmon resonance (SPR). Kinetic studies were carried out by two different immobilisation methods: (a) SH-ssDNA was firstly attached on gold and the remaining free space was filled with polymer and (b) SH-ssDNA and the polymer was attached onto the surface from the same solution. The immobilisation methods were compared for various concentrations of SH-ssDNA. Hybridisation was dependent on both the immobilisation method and the concentration of the components. The highest hybridisation was obtained when SH-ssDNA and the polymer was immobilised from the same solution at low SH-ssDNA concentration or when high concentrations of oligos were spread onto the surface and the surface was post-treated with polymer. The target response corresponded to a surface coverage of 100+/-15 ng/cm2. The same surface coverage on hybridisation was also obtained when low concentration of SH-ssDNA and polymer was attached onto the surface from the same solution. The non-specific binding of sample DNA was very low at optimal concentrations due to the polymer and the hybridisation was linearly dependent on target concentration.

Efficient recombination-based methods for bacterial artificial chromosome fusion and mutagenesis

The availability of genomic sequence information and extensive bacterial artificial chromosome (BAC) libraries for both the mouse and human genomes is ushering in a new era in biological research and disease modeling. To facilitate the study of large mammalian genes in vivo, we have developed: i) a simple lambda bacteriophage-based methodology for recombining overlapping bacterial artificial chromosomes (BACs) into a single larger BAC, and ii) a new methodology for targeting "seamless" mutations into BACs. In the first method, overlapping sequence from one BAC is cloned alongside a selectable marker and placed between unique sequence arms from the terminus of the other BAC to create a targeting construct. Two rounds of recombination-based cloning are then performed. The robustness of this methodology is demonstrated herein by using it to obtain a 254 kb BAC containing the entire human androgen receptor (hAR) gene. In the second method, transient expression of three lambda bacteriophage genes to 'pop-in' a targeting cassette is followed by RecA expression from the targeting vector itself to 'pop-out' the vector backbone. This new "hybrid recombineering" method combines the strengths of the lambda bacteriophage and RecA systems, while avoiding their major weaknesses. Application of this method for introduction of a 162 CAG repeat expansion into the hAR 254kb BAC is shown. With "hybrid recombineering", we believe that the power and utility of the classical 'pop-in/pop-out' approach -- so commonly and efficiently employed in yeast for decades -- can now be achieved with BACs.

Highly restricted expression of Cre recombinase in cerebellar Purkinje cells

The Purkinje neuron, one of the most fascinating components of the cerebellar cortex, is involved in motor learning, motor coordination, and cognitive function. Purkinje cell protein 2 (Pcp2/L7) expression is highly restricted to Purkinje and retinal bipolar cells, where it has been exploited to enable highly specific, Cre recombinase-mediated, site-specific recombination. Previous studies showed that mice carrying a Cre transgene produced by insertion of Cre cDNA into a small 2.88-kb Pcp2 DNA fragment expressed Cre in Purkinje cells; however, some Cre activity was also observed outside the target tissues. Here, we used Red-mediated recombineering to insert Cre cDNA into a 173-kb BAC carrying the entire intact Pcp2 gene, and characterize the resultant BAC/Cre transgenic mice for Cre expression. We show that BAC/Cre transgenic mice have exclusive Cre expression in Purkinje and bipolar cells and nowhere else. These mice will facilitate Purkinje cell and retinal bipolar cell-specific genetic manipulation.

Transposon-mediated generation of targeting vectors for the production of gene knockouts

Vectors used for gene targeting experiments usually consist of a selectable marker flanked by two regions of homology to the targeted gene. In a homologous recombination event, the selectable marker replaces an essential element of the target gene rendering it inactive. Other applications of gene targeting technology include gene replacement (knockins) and conditional vectors which allow for the generation of inducible or tissue-specific gene-targeting events. The assembly of gene-targeting vectors is generally a laborious process requiring considerable technical skill. The procedures presented here report the application of transposons as tools for the construction of targeting vectors. Two mini-Mu transposons were sequentially inserted by in vitro transposition at each side of the region targeted for deletion. One such transposon carries an antibiotic resistance marker suitable for selection in mammalian cells. A deletion is then generated between the two transposons either by LoxP-induced recombination or by restriction digestion followed by ligation. This deletion removes part of both transposons plus the targeted region in between, leaving a transposon carrying the selectable marker flanked by two arms which are homologous to the targeted gene. Targeting vectors constructed using these transposons were electroporated into embryonic stem cells and shown to be effective in gene-targeting events.

Recombining overlapping BACs into a single larger BAC

Background

BAC clones containing entire mammalian genes including all the transcribed region and long range controlling elements are very useful for functional analysis. Sequenced BACs are available for most of the human and mouse genomes and in many cases these contain intact genes. However, large genes often span more than one BAC, and single BACs covering the entire region of interest are not available. Here we describe a system for linking two or more overlapping BACs into a single clone by homologous recombination.

Results

The method was used to link a 61-kb insert carrying the final 5 exons of the human CFTR gene onto a 160-kb BAC carrying the first 22 exons. Two rounds of homologous recombination were carried out in the EL350 strain of bacteria which can be induced for the Red genes. In the first round, the inserts of the two overlapping BACs were subcloned into modified BAC vectors using homologous recombination. In the second round, the BAC to be added was linearised with the very rare-cutting enzyme I-PpoI and electroporated into recombination efficient EL350 bacteria carrying the other BAC. Recombined BACs were identified by antibiotic selection and PCR screening and 10% of clones contained the correctly recombined 220-kb BAC.

Conclusion

The system can be used to link the inserts from any overlapping BAC or PAC clones. The original orientation of the inserts is not important and desired regions of the inserts can be selected. The size limit for the fragments recombined may be larger than the 61 kb used here and multiple BACs in a contig could be combined by alternating use of the two pBACLink vectors. This system should be of use to many investigators wishing to carry out functional analysis on large mammalian genes which are not available in single BAC clones.