The sensing of circRNA with tetrahedral DNA nanostructure modified microfluidic chip

BACKGROUND

Circular ribonucleic acids (circRNAs) are a type of covalently closed noncoding RNA with disease-relevant expressions, making them promising biomarkers for diagnosis and prognosis. Accurate quantification of circRNA in biological samples is a necessity for their clinical application. So far, methods developed for detecting circRNAs include northern blotting, reverse transcription quantitative polymerase chain reaction (RT-qPCR), microarray analysis, and RNA sequencing. These methods generally suffer from disadvantages such as large sample consumption, cumbersome process, low selectivity, leading to inaccurate quantification of circRNA. It was thought that the above drawbacks could be eliminated by the construction of a microfluidic sensor.

RESULTS

Herein, for the first time, a microfluidic sensor was constructed for circRNA analysis by using tetrahedral DNA nanostructure (TDN) as the skeleton for recognition probes and target-initiated hybridization chain reaction (HCR) as the signal amplification strategy. In the presence of circRNA, the recognition probe targets the circRNA-specific backsplice junction (BSJ). The captured circRNA then triggers the HCR by reacting with two hairpin species whose ends were labeled with 6-FAM, producing long DNA strands with abundant fluorescent labels. By using circ_0061276 as a model circRNA, this method has proven to be able to detect circRNA of attomolar concentration. It also eliminated the interference of linear RNA counterpart, showing high selectivity towards circRNA. The detection process can be implemented isothermally and does not require expensive complicated instruments. Moreover, this biosensor exhibited good performance in analyzing circRNA targets in total RNA extracted from cancer cells.

SIGNIFICANCE

This represents the first microfluidic system for detection of circRNA. The biosensor showed merits such as ease of use, low-cost, small sample consumption, high sensitivity and specificity, and good reliability in complex biological matrix, providing a facile tool for circRNA analysis and related disease diagnosis in point-of care application scenes.

Constraint Coupling of Redox Cascade and Electron Transfer Synchronization on Electrode-Nanosensor Interface for Repeatable Detection of Tumor Biomarkers

Quantitative analysis of up-regulated biomarkers in pathological tissues is helpful to tumor surgery yet the loss of biomarker extraction and time-consuming operation limited the accurate and quick judgement in preoperative or intraoperative diagnosis. Herein, an immobilization-free electrochemical sensing platform is developed by constraint coupling of electron transfer cascade on electrode-nanosensor interface. Specifically, electrochemical indicator (Ri)-labeled single-stranded DNA on electroactive nanodonor (polydopamine, PDA) can be responsively detached by formation of DNA complex through the recognition and binding with targets. By applying the oxidation potential of Ri, nanosensor collisions on electrode surface trigger a cascade redox cycling of PDA and Ri through synchronous electron transfer, which boost the amplification of current signal output. The developed nanosensor exhibit excellent linear response toward up-regulated biomarkers (miRNA-21, ATP, and VEGF) with low detection limits (32 fM, 386 pM, and 2.8 pM). Moreover, background influence from physiological interferent is greatly reduced by restricted electron transfer coupling on electrode. The practical applicability is illustrated in sensitive and highly repeatable profiling of miRNA-21 in lysate of tumor cells and tumor tissue, beneficial for more reliable diagnosis. This electrochemical platform by employing electron transfer cascades at heterogeneous interfaces offers a route to anti-interference detection of biomarkers in tumor tissues.

Sensitivity-Enhancing Strategies of Graphene Field-Effect Transistor Biosensors for Biomarker Detection

The ultrasensitive recognition of biomarkers plays a crucial role in the precise diagnosis of diseases. Graphene-based field-effect transistors (GFET) are considered the most promising devices among the next generation of biosensors. GFET biosensors possess distinct advantages, including label-free, ease of integration and operation, and the ability to directly detect biomarkers in liquid environments. This review summarized recent advances in GFET biosensors for biomarker detection, with a focus on interface functionalization. Various sensitivity-enhancing strategies have been overviewed for GFET biosensors, from the perspective of optimizing graphene synthesis and transfer methods, refinement of surface functionalization strategies for the channel layer and gate electrode, design of biorecognition elements and reduction of nonspecific adsorption. Further, this review extensively explores GFET biosensors functionalized with antibodies, aptamers, and enzymes. It delves into sensitivity-enhancing strategies employed in the detection of biomarkers for various diseases (such as cancer, cardiovascular diseases, neurodegenerative disorders, infectious viruses, etc.) along with their application in integrated microfluidic systems. Finally, the issues and challenges in strategies for the modulation of biosensing interfaces are faced by GFET biosensors in detecting biomarkers.

Bifunctional Protein TC1 Mediated One-Pot Strategy for Robust Immobilization of DNA with High Accessibility

Immobilizing DNA with high accessibility at the interface is attractive but challenging. Current methods often involve multiple chemical reactions and derivatives. In this study, an endonuclease, TC1, is introduced to develop a robust strategy for immobilizing DNA with enhanced accessibility. TC1 enables direct immobilization of DNA onto a solid support through self-catalytic DNA covalent coupling and robust solid adsorption capabilities. This method demonstrates high accessibility to target molecules, supported by the improved sensitivity of DNA hybridization and aptamer-target recognition assays. TC1-mediated DNA immobilization is a one-pot reaction that does not require chemical derivatives, making it promising for the development of high-performance DNA materials and technologies.

Life at the interface: Engineering bio-nanomaterials through interfacial molecular self-assembly

Interfacial self-assembly describes the directed organization of molecules and colloids at phase boundaries. Believed to be fundamental to the inception of primordial life, interfacial assembly is exploited by a myriad of eukaryotic and prokaryotic organisms to execute physiologic activities and maintain homeostasis. Inspired by these natural systems, chemists, engineers, and materials scientists have sought to harness the thermodynamic equilibria at phase boundaries to create multi-dimensional, highly ordered, and functional nanomaterials. Recent advances in our understanding of the biophysical principles guiding molecular assembly at gas-solid, gas-liquid, solid-liquid, and liquid-liquid interphases have enhanced the rational design of functional bio-nanomaterials, particularly in the fields of biosensing, bioimaging and biotherapy. Continued development of non-canonical building blocks, paired with deeper mechanistic insights into interphase self-assembly, holds promise to yield next generation interfacial bio-nanomaterials with unique, and perhaps yet unrealized, properties. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Therapeutic Approaches and Drug Discovery > Emerging Technologies.

Interface-Engineered Field-Effect Transistor Electronic Devices for Biosensing

Promising advances in molecular medicine have promoted the urgent requirement for reliable and sensitive diagnostic tools. Electronic biosensing devices based on field-effect transistors (FETs) exhibit a wide range of benefits, including rapid and label-free detection, high sensitivity, easy operation, and capability of integration, possessing significant potential for application in disease screening and health monitoring. In this perspective, the tremendous efforts and achievements in the development of high-performance FET biosensors in the past decade are summarized, with emphasis on the interface engineering of FET-based electrical platforms for biomolecule identification. First, an overview of engineering strategies for interface modulation and recognition element design is discussed in detail. For a further step, the applications of FET-based electrical devices for in vitro detection and real-time monitoring in biological systems are comprehensively reviewed. Finally, the key opportunities and challenges of FET-based electronic devices in biosensing are discussed. It is anticipated that a comprehensive understanding of interface engineering strategies in FET biosensors will inspire additional techniques for developing highly sensitive, specific, and stable FET biosensors as well as emerging designs for next-generation biosensing electronics.

Kinetic Mechanism of Surfactant-Based Molecular Recognition: Selective Permeability across an Oil-Water Interface Regulated by Supramolecular Aggregates

Lipids are known to play a vital role in the molecular organization of all cellular life. Molecular recognition is another fundamental biological process that is generally attributed to biological polymers, such as proteins and nucleic acids. However, there is evidence that aggregates of lipids and lipid-like molecules are also capable of selectively binding to or regulating the partitioning of other molecules. We previously demonstrated that a model two-phase octanol/water system can selectively partition Red 40 and Blue 1 dyes added to an aqueous phase, with the selectivity depending on the surfactant (e.g., cetyltrimethylammonium bromide) dissolved in the organic phase. Here, we elucidate the mechanism of molecular recognition in this system by using quantitative partitioning experiments and molecular dynamics (MD) simulations. Our results indicate that the selectivity for the red dye is thermodynamically favored at all surfactant concentrations, while selectivity for the blue dye is kinetically favored at high surfactant concentrations. The kinetic selectivity for the blue dye correlates with the presence of molecular aggregation at the oil-water interface. Coarse-grained MD simulations elucidate nanoscale supramolecular structures that can preferentially bind one small molecule rather than another at an interface, providing a selectively permeable barrier in the absence of proteins. The results suggest a new supramolecular mechanism for molecular recognition with potential applications in drug delivery, drug discovery, and biosensing.

CRISPR/dCas9-Mediated Specific Molecular Assembly Facilitates Genotyping of Mutant Circulating Tumor DNA

Breakthroughs in circulating tumor DNA (ctDNA) analysis are critical in tumor liquid biopsies but remain a technical challenge due to the double-stranded structure, extremely low abundance, and short half-life of ctDNA. Here, we report an electrochemical CRISPR/dCas9 sensor (E-dCas9) for sensitive and specific detection of ctDNA at a single-nucleotide resolution. The E-dCas9 design harnesses the specific capture and unzipping of target ctDNA by dCas9 to introduce a complementary reporter probe for specific molecular assembly and signal amplification. By efficient homogeneous assembly and interfacial click reaction, the assay demonstrates superior sensitivity (up to 2.86 fM) in detecting single-base mutant ctDNA and a broad dynamic range spanning 6 orders of magnitude. The sensor is also capable of measuring 10 fg/μL of a mutated target in excess of wild-type ones (1 ng/μL), equivalent to probing 0.001% of the mutation relative to the wild type. In addition, our sensor can monitor the dynamic expression of cellular genomic DNA and allows accurate analysis of blood samples from patients with nonsmall cell lung cancer, suggesting the potential of E-dCas9 as a promising tool in ctDNA-based cancer diagnosis.

Recent trends in aptamer-based nanobiosensors for detection of vascular endothelial growth factors (VEGFs) biomarker: A review

Vascular endothelial growth factor (VEGF) is a remarkable cytokine that plays an important role in regulating vascular formation during the angiogenesis process. Therefore, real-time detection and quantification of VEGF is essential for clinical diagnosis and treatment due to its overexpression in various tumors. Among various sensing strategies, the aptamer-based sensors in combination with biological molecules improve the detection ability VEGFs. Aptamers are suitable biological recognition agents for the preparation of sensitive and reproducible aptasensors (Apt-sensors) due to their low immunogenicity, simple and straightforward chemical modification, and high resistance to denaturation. Here, a summary of the strategies for immobilization of aptamers (e.g., direct or self-assembled monolayer (SAM) attachment, etc.) on different types of electrodes was provided. Moreover, we discussed nanoparticle deposition techniques and surface modification methods used for signal amplification in the detection of VEGF. Furthermore, we are investigating various types of optical and electrochemical Apt-sensors used to improve sensor characterization in the detection of VEGF biomarkers.

Bioorthogonal Microbubbles with Antifouling Nanofilm for Instant and Suspended Enrichment of Circulating Tumor Cells

Integrating clinical rare cell enrichment, culture, and single-cell phenotypic profiling is currently hampered by the lack of competent technologies, which typically suffer from weak cell-interface collision affinity, strong nonspecific adsorption, and the potential uptake. Here, we report cells-on-a-bubble, a bioinspired, self-powered bioorthogonal microbubble (click bubble) that leverages a clickable antifouling nanointerface and a DNA-assembled sucker-like polyvalent cell surface, to enable instant and suspended isolation of circulating tumor cells (CTCs) within minutes. Using this biomimetic engineering strategy, click bubbles achieve a capture efficiency of up to 98%, improved by 20% at 15 times faster over their monovalent counterparts. Further, the buoyancy-activated bubble facilitates self-separation, 3D suspension culture, and in situ phenotyping of the captured single cancer cells. By using a multiantibody design, this fast, affordable micromotor-like click bubble enables suspended enrichment of CTCs in a cohort (n = 42) across three cancer types and treatment response evaluation, signifying its great potential to enable single-cell analysis and 3D organoid culture.

Amalgamation of DNAzymes and Nanozymes in a Coronazyme

Artificial enzymes such as nanozymes and DNAzymes are economical and stable alternatives to natural enzymes. By coating Au nanoparticles (AuNPs) with a DNA corona (AuNP@DNA), we amalgamated nanozymes and DNAzymes into a new artificial enzyme with catalytic efficiency 5 times higher than AuNP nanozymes, 10 times higher than other nanozymes, and significantly greater than most of the DNAzymes on the same oxidation reaction. The AuNP@DNA demonstrates excellent specificity as its reactivity on a reduction reaction does not change with respect to pristine AuNP. Single-molecule fluorescence and force spectroscopies and density functional theory (DFT) simulations indicate a long-range oxidation reaction initiated by radical production on the AuNP surface, followed by radical transport to the DNA corona, where the binding and turnover of substrates take place. The AuNP@DNA is named coronazyme because of its natural enzyme mimicking capability through the well-orchestrated structures and synergetic functions. By incorporating different nanocores and corona materials beyond DNAs, we anticipate that the coronazymes represent generic enzyme mimics to carry out versatile reactions in harsh environments.

Magneto-Nanomechanical Array Biosensor for Ultrasensitive Detection of Oncogenic Exosomes for Early Diagnosis of Cancers

Exosomes are a class of nanoscale vesicles secreted by cells, which contain abundant information closely related to parental cells. The ultrasensitive detection of cancer-derived exosomes is highly significant for early non-invasive diagnosis of cancer. Here, an ultrasensitive nanomechanical sensor is reported, which uses a magnetic-driven microcantilever array to selectively detect oncogenic exosomes. A magnetic force, which can produce a far greater deflection of microcantilever than that produced by the intermolecular interaction force even with very low concentrations of target substances, is introduced. This method reduced the detection limit to less than 10 exosomes mL^-1 . Direct detection of exosomes in the serum of patients with breast cancer and in healthy people showed a significant difference. This work improved the sensitivity by five orders of magnitude as compared to that of traditional nanomechanical sensing based on surface stress mode. This method can be applied parallelly for highly sensitive detection of other microorganisms (such as bacteria and viruses) by using different probe molecules, which can provide a supersensitive detection approach for cancer diagnosis, food safety, and SARS-CoV-2 infection.

Primer exchange reaction-amplified protein-nucleic acid interactions for ultrasensitive and specific microRNA detection

Protein-nucleic acid interactions are not only fundamental to genetic regulation and cellular metabolism, but molecular basis to artificial biosensors. However, such interactions are generally weak and dynamic, making their specific and sensitive quantitative detection challenging. By using primer exchange reaction (PER)-amplified protein-nucleic acid interactions, we here design a universal and ultrasensitive electrochemical sensor to quantify microRNAs (miRNAs) in blood. This PER-miR sensor leverages specific recognition between S9.6 antibodies and miRNA/DNA hybrids to couple with PER-derived multi-enzyme catalysis for ultrasensitive miRNA detection. Surface binding kinetic analysis shows a rational K_d (8.9 nM) between the miRNA/DNA heteroduplex and electrode-attached S9.6 antibody. Based on such a favorable affinity, the programmable PER amplification enables the sensor to detect target miRNAs with sensitivity up to 90.5 aM, three orders of magnitude higher than that without PER in routine design, and with specificity of single-base resolution. Furthermore, the PER-miR sensor allows detecting multiple miRNAs in parallel, measuring target miRNA in lysates across four types of cell lines, and differentiating tumor patients from healthy individuals by directly analyzing the human blood samples (n = 40). These advantages make the sensor a promising tool to enable quantitative sensing of biomolecular interactions and precision diagnostics.

The enhancement of enzyme cascading via tetrahedral DNA framework modification

Enzyme clustering is widely used in many organisms to increase the catalytic efficiency of cascade reactions. Inspired by nature, organizing enzymes within a cascade reaction also draws much attention in both basic research and industrial processes. An important step for organizing enzymes precisely in vitro is enzyme modification. However, modifying enzymes without sacrificing their activity remains challenging until now. For example, labeling enzymes with DNA, one of the well-established enzyme modification methods, has been shown to significantly reduce the enzymatic activity. Herein we report an enzyme conjugation method that can rescue the reduction of enzymatic activity caused by DNA labeling. We demonstrate that immobilizing DNA-modified enzymes on the vertex of TDNs (tetrahedral DNA nanostructures) enhances the enzymatic activity compared with their unmodified counterparts. Using this strategy, we have further developed an ultra-sensitive and high-throughput electrochemical biosensor for sarcosine detection, which holds great promise for prostate cancer screening.

Framework Nucleic Acids as Blood-Retinal-Barrier-Penetrable Nanocarrier for Periocular Administration

Designing an ocular drugs delivery system that can permeate the outer blood-retinal barrier (oBRB) is crucial for the microinvasive or noninvasive treatment of ocular fundus diseases. However, due to the lack of a nanocarrier that can maintain structure and composition at the oBRB, only intravitreal injection at the eyeball can deliver therapeutics directly to the ocular fundus via paracellular and intercellular routes, despite the intraocular operations risks. Here, we demonstrated tetrahedral framework nucleic acids (tFNAs) can penetrate the oBRB and deliver therapeutic nucleic acids to the retina of the rat eye in vivo following subconjunctival injection. We also discovered that tFNAs were transported via a paracellular route across the intercellular tight junctions at the oBRB. The histology analysis for ocular layers indicated that individual and aptamer/doxorubicin-loaded tFNAs penetrated all layers of the posterior segment of the eyeball to reach the innermost retina and persisted for over 3 days with minimal systemic biodistribution. We expect that the programmability and penetrability of tFNAs will provide a promising method for drug delivery across oBRB and long-term sustenance at the target site via periocular administration to various tissues.

DNA-Based Molecular Machines

Artificial molecular machines have found widespread applications ranging from fundamental studies to biomedicine. More recent advances in exploiting unique physical and chemical properties of DNA have led to the development of DNA-based artificial molecular machines. The unprecedented programmability of DNA provides a powerful means to design complex and sophisticated DNA-based molecular machines that can exert mechanical force or motion to realize complex tasks in a controllable, modular fashion. This Perspective highlights the potential and strategies to construct artificial molecular machines using double-stranded DNA, functional nucleic acids, and DNA frameworks, which enable improved control over reaction pathways and motion behaviors. We also outline the challenges and opportunities of using DNA-based molecular machines for biophysics, biosensing, and biocomputing.

Tetrahedral DNA framework based CRISPR electrochemical biosensor for amplification-free miRNA detection

microRNA (miRNA) is a kind of small non-coding RNA that has been regarded as potential biomarkers for cancers. Sensitive and specific detection of miRNA at low expression levels is highly desirable but remains challenging, especially for amplification-free and portable point of care (POC) diagnostics. The clustered regularly interspaced short palindromic repeats (CRISPR)/Cas13a has been recently discovered and used in the field of RNA detection. Nonetheless, most CRISPR/Cas13a-based methods were burdened with expensive equipment, time-consuming procedures, and complicated operations which were not suitable for POC analysis. In this work, we constructed a three-dimensional tetrahedral DNA framework based CRISPR-electrochemical biosensor (CRISPR-E). By combining tetrahedral DNA framework, CRISPR, and electrochemical biosensor, the process of activation, cleavage of Cas13a, and signal readout were all finished on the chip, and a simple, amplification-free and sensitive detection of miRNA-19b was realized. Under the optimal experimental conditions, a linear range from 10 pM to 10⁴ pM with detection limit of 10 pM for miRNA-19b in buffer solution was achieved. Selectivity analysis indicated that our CRISPR-E had good distinguishing ability between miRNA-19b and miRNA-197. The results of miRNA-19b detection in mimic serum samples were consistent with that of the buffer solution. This all-on-chip strategy of our CRISPR-E is very suitable for POC testing.

Spherical Nucleic Acids with Tailored DNA Conformation via Bromide Backfilling for the Detection of Kanamycin

Improper conformation of oligonucleotides on gold nanoparticles surface caused by unintended base adsorption, which hinders DNA hybridization and lowers colloidal stability. In this work, we treated spherical nucleic acids with Br^- , which serves as an efficient backfilling agent, to adjust the DNA conformation by displacing bases from gold surface. To investigate the effect of DNA conformation on interfacial recognition, a kanamycin fluorescent aptasensor was constructed with bromide backfilling treated spherical nucleic acids. In the presence of kanamycin, the anchored aptamer binding with target and the partially complementary reporter strand is dissociated from the surface of gold nanoparticles, resulting the fluorescence recovery of labelled fluorophore on the reporter strand. Under the optimum condition, the apparent binding affinity of the aptasensor with bromide backfilling was 2.2-fold than that of without backfilled one. The proposed aptasensor exhibited a good liner relationship between the concentration of kanamycin and fluorescence intensity change in the range of 200 nM to 10 μM and the limit of detection was calculated to be 71.53 nM. Moreover, this aptasensor was also successfully applied in spiked milk sample assay and the satisfactory recoveries was obtained in the range of 96.94-101.57%, which demonstrate its potential in practical application.

Sensitive Electrochemical Biosensor for Rapid Screening of Tumor Biomarker TP53 Gene Mutation Hotspot

Rapid and sensitive detection of cancer biomarkers is crucial for cancer screening, early detection, and improving patient survival rate. The present study proposes an electrochemical gene-sensor capable of detecting tumor related TP53 gene mutation hotspots by self-assembly of sulfhydryl ended hairpin DNA probes tagged with methylene blue (MB) onto a gold electrode. By performing a hybridization reaction with the target DNA sequence, the gene-sensor can rearrange the probe’s structure, resulting in significant electrochemical signal differences by differential pulse voltammetry. When the DNA biosensor is hybridized with 1 μM target DNA, the peak current response signal can decrease more than 60%, displaying high sensitivity and specificity for the TP53 gene. The biosensor achieved rapid and sensitive detection of the TP53 gene with a detection limit of 10 nmol L⁻¹, and showed good specific recognition ability for single nucleotide polymorphism (SNP) and base sequence mismatches in the TP53 gene affecting residue 248 of the P53 protein. Moreover, the biosensor demonstrated good reproducibility, repeatability, operational stability, and anti-interference ability for target DNA molecule in the complex system of 50% fetal bovine serum. The proposed biosensor provides a powerful tool for the sensitive and specific detection of TP53 gene mutation hotspot sequences and could be used in clinical samples for early diagnosis and detection of cancer.

Self-Assembling Protein Surfaces for In Situ Capture of Cell-Free-Synthesized Proteins

We present a new method for the surface capture of proteins in cell-free protein synthesis (CFPS). We demonstrate the spontaneous self-assembly of the protein BslA into functionalizable surfaces on the surface of a CFPS reaction chamber. We show that proteins can be covalently captured by such surfaces, using “Catcher/Tag” technology. Importantly, proteins of interest can be captured either when synthesised in situ by CFPS above the BslA surfaces, or when added as pure protein. The simplicity and cost efficiency of this method suggest that it will find many applications in cell-free-based methods.

Two-Dimensional Protein Nanoarray as a Carrier of Sensing Elements for Gold-Based Immunosensing Systems

Homogeneous and high-density immobilization of proteins on gold-based sensing surface without the loss of protein activity is of great significance for high-performance immunosensing but remains challenging. To realize more sensitive immunosensing, an improved method for protein immobilization on the gold surface is urgently required. Here, we propose a biological and mild approach by combining a genetically encoded SpyTag-SpyCatcher interaction system with a redesigned S-layer of bacteria. This method allows proteins of interest to be covalently linked with the S-layer in a biological manner and arranged orderly in a two-dimensional nanoarray on the gold surface. The activity of African swine fever virus proteins was significantly preserved after immobilization. In addition, our S-layer-based immobilization method exhibited an eightfold increase in detection sensitivity compared with the conventional chemical cross-linking for protein immobilization during serological tests. Together, our S-layer-based immobilization method provides an innovative approach for building a quality gold-based biosensing interface and should greatly contribute to the high-sensitivity sensing for a deeper understanding of pathogen infection and host immunity.

Aptamers as Recognition Elements for Electrochemical Detection of Exosomes

Exosome analysis is emerging as an attractive noninvasive approach for disease diagnosis and treatment monitoring in the field of liquid biopsy. Aptamer is considered as a promising molecular probe for exosomes detection because of the high binding affinity, remarkable specificity, and low cost. Recently, many approaches have been developed to further improve the performance of electrochemical aptamer based(E-AB) sensors with a lower limit of detection. In this review, we focus on the development of using aptamer as a specific recognition element for exosomes detection in electrochemical sensors. We first introduce recent advances in evolving aptamers against exosomes. Then, we review methods of immobilization aptamers on electrode surfaces, followed by a summary of the main strategies of signal amplification. Finally, we present the insights of the challenges and future directions of E-AB sensors for exosomes analysis.

Interfacial DNA Framework-Enhanced Background-to-Signal Transition for Ultrasensitive and Specific Micro-RNA Detection

Interfacial DNA self-assembly is fundamental to solid nucleic acid biosensors, whereas how to improve the signal-to-noise ratio has always been a challenge, especially in the charge-based electrochemical DNA sensors because of the large noise from the negatively charged DNA capture probes. Here, we report a DNA framework-reversed signal-gain strategy through background-to-signal transition for ultrasensitive and highly specific electrical detection of microRNAs (miRNAs) in blood. By using a model of enzyme-catalyzed deposition of conductive molecules (polyaniline) targeting to DNA, we observed the highest signal contribution per unit area by the highly charged three-dimensional (3D) tetrahedral DNA framework probe, relative to the modest of two-dimensional (2D) polyA probe and the lowest of one-dimensional (1D) single-stranded (ss)DNA probe, suggesting the positive correlation of background DNA charge with signal enhancement. Using such an effective signal-transition design, the DNA framework-based electrochemical sensor achieves ultrasensitive miRNAs detection with sensitivity up to 0.29 fM (at least 10-fold higher than that with 1D ssDNA or 2D polyA probes) and high specificity with single-base resolution. More importantly, this high-performance sensor allows for a generalized sandwich detection of tumor-associated miRNAs in the complex matrices (multiple cell lysates and blood serum) and further distinguishes the tumor patients (e.g., breast, lung, and liver cancer) from the normal individuals. These advantages signify the promise of this miRNA sensor as a versatile tool in precision diagnosis.

Embedding Proteins within Spatially Controlled Hierarchical Nanoarchitectures for Ultrasensitive Immunoassay

Modulating the precise self-assembly of functional biomacromolecules is a critical challenge in biotechnology. Herein, functional biomacromolecule-assembled hierarchical hybrid nanoarchitectures in a spatially controlled fashion are synthesized, achieving the biorecognition behavior and signal amplification in the immunoassay simultaneously. Biomacromolecules with sequential assembly on the scaffold through the biomineralization process show significantly enhanced stability, bioactivity, and utilization efficiency, allowing tuning of their functions by modifying their size and composition. The hierarchically hybrid nanoarchitectures show great potential in construction of ultrasensitive immunoassay platforms, achieving a three order-of-magnitude increase in sensitivity. Notably, the well-designed HRP@Ab₂ nanoarchitectures allow for optical immunoassays with a detection range from picogram mL^-1 to microgram mL^-1 on demand, providing great promise for quantitative analysis of both low-abundance and high-residue targets for biomedical applications.

Poly-adenine-mediated spherical nucleic acids for interfacial recognition of kanamycin

Kanamycin fluorescence aptasensors were created using a series of di-block oligonucleotide modified gold nanoparticles with various lengths of poly-adenine. In the presence of kanamycin, the double strand structure of the aptamer-reporter strand complex is disrupted, and the dye-labelled reporter strand detaches from the surface of gold nanoparticles, resulting in fluorescence recovery (Ex/Em = 485/520 nm). By adjusting the number of consecutive adenines, the programable aptamer density can be implemented on the gold nanoparticle surface, and the conformation of nucleic acid changed from lying-down to up-right. The apparent binding constant, binding kinetics, and limit of detection of the prepared aptasensors were carefully examined to explore the influence of surface density. Under the optimum condition, the aptasensor had a tenfold lower limit of detection than the thiolated aptamer modified one, as low as 23.6 nM, when a di-block oligonucleotide with twenty consecutive adenines tailed. In addition, satisfactory recoveries ranging from 96.33 to 99.47% were achieved in spiked milk samples with relative standard deviation of 1.2-6.9% (n = 3). This surface density regulation strategy holds great promise in other aptamer-based interfacial recognition and sensing. Schematic presentation of di-block oligonucleotide modified gold nanoparticle with different surface densities and its kanamycin sensing application.

Self-assembled multiprotein nanostructures with enhanced stability and signal amplification capability for sensitive fluorogenic immunoassays

Fundamentally improving the sensing sensitivity of immunoassay remains a huge challenge, which limited further critical applications. Herein we designed a new immunoprobe by integrating biometric unit (antibody) and signal amplification element (enzyme) to form urease-antibody-CaHPO₄ hybrid nanoflower (UAhNF) via the biomineralization process. The dual-functional UAhNF enhances the stability of urease in NaCl (10 mmol L^-1) and high temperature (60 °C), and also maintains the ability of antibody recognition, fitting greatly well with the need for immunosensor. Using imidacloprid as a model target, the fixed coating antigens are competed with imidacloprid to capture primary antibodies, and the secondary antibody of UAhNF was linked to construct the competitive-type fluorogenic immunoassays. An in-situ etching process of copper nanoparticles initiated by urease is integrated with UAhNF-based immune response for further improving the detection sensitivity. The proposed immunosensor possessed a 50% inhibition concentration value of 0.72 ng mL^-1, which is 30-fold lower than conventional enzyme-linked immunosorbent assay. This presented approach provided a versatile sensing tool by varying building blocks, making it practically functional for a variety of bioassay applications.

Crystal-reconstructed BiVO4 semiconductor photoelectrochemical sensor for ultra-sensitive tumor biomarker detection

In this study, we developed a crystal-reconstructed-BiVO₄ aptamer photoelectrochemical (PEC) biosensor by a high-energy laser treatment technique. This biosensor achieves a limit of detection (LOD) (0.82 ag mL^-1), linear detection range (1 ag mL^-1 to 2 ng mL^-1), and resolution ratio (∼18 molecules per mL) for prostate-specific antigen (PSA) tumor biomarker detection. Furthermore, reconstructed surface microstructure and oxygen vacancy doping energy formation after crystal reconstruction induce the stereo-hindrance effect and photogenerated hole energy is reduced during PSA target detection. In this case, a photocurrent inhibition phenomenon for PSA detection is noticed. Based on this photocurrent inversion phenomenon, some dysoxidizable nucleonic acid tumor (miRNA-21) and virus biomarkers (RdRp-COVID) can be detected with a LOD level of ∼10^-16 M by linking the corresponding base paring probe on the surface of the crystal-reconstructed photoanode. In addition to high sensitivity, this PEC biosensor presents high detection specificity, stability, and accuracy in clinical verification. Thus, this crystal-reconstructed PEC biosensor shows application potential in the fields of multi-tumor or viral biomarker detection.

Triblock probe-polyA-probe electrochemical interfacial engineering for the sensitive analysis of RNAi plants

RNA interference (RNAi) is under fast development in agriculture and brings new challenge for GMO analysis. We developed a electrochemical biosensor for the analysis of GM maize samples based on a polyA-DNA capturing probe. Ultrasensitive detection of 10 fM RNA was realized.

Redox Host-Guest Nanosensors Installed with DNA Gatekeepers for Immobilization-Free and Ratiometric Electrochemical Detection of miRNA

Electrochemical nanosensors by integrating functional nucleic acids and nanomaterials hold a great promise in the fast detection of biomarkers, yet the current systems possess limitations on the accessibility of target-probe and probe-electrode interactions and the repeatability of detection. Herein, a host-guest assembly strategy is developed to build redox nanosensors for an immobilization-free and ratiometric electrochemical detection system. Specifically, electroactive molecule (E_m ) guests are loaded in porous hosts of polydopamine nanoparticles (MPDA) to act as dual-signal redox reporters. Hybrid DNA probes of G-quadruplex and a single-stranded anchor DNA are installed as gatekeepers for sealing the mesopores. Thereby, miRNA triggered E_m release by strand displacement reactions and the homogeneous transportation of the hosts/guests to the electrode facilitate the generation of reference signal/response signal at different potentials. Concomitantly applied NIR irradiation boosts the electron transfer from MPDA to the electrode and results in a tenfold increase in the reference signal. Finally, the sensing system through the differential pulse voltammetry method achieves a highly repeatable detection (relative standard deviation 3.8%) of miRNA with a lower detection limit (362 × 10^-15 m). This attractive system paves the way for rational designs of advanced electrochemical biosensors and smart diagnosis.

Nucleic acid-based electrochemical biosensor: Recent advances in probe immobilization and signal amplification strategies

With the increasing importance of accurate and early disease diagnosis and the development of personalized medicine, DNA-based electrochemical biosensor has attracted broad scientific and clinical interests in the past decades due to its unique hybridization specificity, fast response time, and potential for miniaturization. In order to achieve high detection sensitivity, the design of DNA electrochemical biosensors depends critically on the improvement of the accessibility of target molecules and the enhancement of signal readout. Here, we summarize the recent advances in DNA probe immobilization and signal amplification strategies with a special focus on DNA nanostructure-supported DNA probe immobilization method, which provides the opportunity to rationally control the distance between probes and keep them in upright confirmation, as well as the contribution of functional nanomaterials in enhancing the signal amplification. The next challenge of biosensors will be the fabrication of point-of-care devices for clinical testing. The advancement of multidisciplinary areas, including nanofabrication, material science, and biochemistry, has exhibited profound promise in achieving such portable sensing devices. This article is categorized under: Diagnostic Tools > Biosensing Diagnostic Tools > Diagnostic Nanodevices Biology-Inspired Nanomaterials > Nucleic Acid-Based Structures.

AI in Measurement Science

Measurement of biological systems containing biomolecules and bioparticles is a key task in the fields of analytical chemistry, biology, and medicine. Driven by the complex nature of biological systems and unprecedented amounts of measurement data, artificial intelligence (AI) in measurement science has rapidly advanced from the use of silicon-based machine learning (ML) for data mining to the development of molecular computing with improved sensitivity and accuracy. This review presents an overview of fundamental ML methodologies and discusses their applications in disease diagnostics, biomarker discovery, and imaging analysis. We next provide the working principles of molecular computing using logic gates and arithmetical devices, which can be employed for in situ detection, computation, and signal transduction for biological systems. This review concludes by summarizing the strengths and limitations of AI-involved biological measurement in fundamental and applied research.

Nucleic Acid Tests for Clinical Translation

Nucleic acids, including deoxyribonucleic acid (DNA) and ribonucleic acid (RNA), are natural biopolymers composed of nucleotides that store, transmit, and express genetic information. Overexpressed or underexpressed as well as mutated nucleic acids have been implicated in many diseases. Therefore, nucleic acid tests (NATs) are extremely important. Inspired by intracellular DNA replication and RNA transcription, in vitro NATs have been extensively developed to improve the detection specificity, sensitivity, and simplicity. The principles of NATs can be in general classified into three categories: nucleic acid hybridization, thermal-cycle or isothermal amplification, and signal amplification. Driven by pressing needs in clinical diagnosis and prevention of infectious diseases, NATs have evolved to be a rapidly advancing field. During the past ten years, an explosive increase of research interest in both basic research and clinical translation has been witnessed. In this review, we aim to provide comprehensive coverage of the progress to analyze nucleic acids, use nucleic acids as recognition probes, construct detection devices based on nucleic acids, and utilize nucleic acids in clinical diagnosis and other important fields. We also discuss the new frontiers in the field and the challenges to be addressed.

Encoding Fluorescence Anisotropic Barcodes with DNA Fameworks

Fluorescence anisotropy (FA) holds great potential for multiplexed analysis and imaging of biomolecules since it can effectively discriminate fluorophores with overlapping emission spectra. Nevertheless, its susceptibility to environmental variation hampers its widespread applications in biology and biotechnology. In this study, we design FA DNA frameworks (FAFs) by scaffolding fluorophores in a fluorescent protein-like microenvironment. We find that the FA stability of the fluorophores is remarkably improved due to the sequestration effects of FAFs. The FA level of the fluorophores can be finely tuned when placed at different locations on an FAF, analogous to spectral shifts of protein-bound fluorophores. The high programmability of FAFs further enables the design of a spectrum of encoded FA barcodes for multiplexed sensing of nucleic acids and multiplexed labeling of live cells. This FAF system thus establishes a new paradigm for designing multiplexing FA probes for cellular imaging and other biological applications.

Multichannel Immunosensor Platform for the Rapid Detection of SARS-CoV-2 and Influenza A(H1N1) Virus

The coronavirus disease 2019 (COVID-19) can present a similar syndrome to an influenza infection, which may complicate diagnosis and clinical management of these two important respiratory infectious diseases, especially during the peak season of influenza. A rapid and convenient point-of-care test (POCT) for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and influenza virus is of great importance for prompt and efficient control of these respiratory epidemics. Herein, a multichannel electrochemical immunoassay (MEIA) platform was developed based on a disposable screen-printed carbon electrode (SPCE) array for the on-site detection of SARS-CoV-2 and A(H1N1). The developed MEIA was constructed with eight channels and allowed rapid detection on a single array. On the SPCE surface, monoclonal antibodies against influenza A(H1N1) hemagglutinin (HA) protein or SARS-CoV-2 spike protein were coated to capture the target antigens, which then interacted with a horseradish peroxidase (HRP)-labeled detection antibody to form an immuno-sandwich complex. The results showed that the MEIA exhibited a broader linear range than ELISA and comparable sensitivity for A(H1N1) HA and SARS-CoV-2 spike protein. The detection results on 79 clinical samples for A(H1N1) suggested that the proposed MEIA platform showed comparable results with ELISA in sensitivity (with a positive rate of 100% for positive samples) but higher specificity, with a false-positive rate of 5.4% for negative samples versus that of 40.5% with ELISA. Thus, it offers great potential for the on-the-spot differential diagnosis of infected patients, which would significantly benefit the efficient control and prevent the spread of these infectious diseases in communities or resource-limited regions in the future.

Sensing ATP: Zeolitic Imidazolate Framework-67 Is Superior to Aptamers for Target Recognition

In a typical biosensor, a biomolecule such as an aptamer is used for target recognition, and a nanomaterial is used for signal generation. Herein, we communicate a reverse system using a nanomaterial for target recognition and a DNA for signaling. We discovered that a classic metal-organic framework material, zeolitic imidazolate framework (ZIF)-67, has ultrahigh selectivity for recognizing adenosine triphosphate (ATP), allowing a fluorescently labeled DNA oligonucleotide to be used for signal generation. This sensor showed up to a 24-fold increase in fluorescence upon adding 1 mM ATP, while the fluorescence increase after adding adenosine or guanosine triphosphate was less than twofold. Its selectivity is much better than that of the ATP aptamer, which binds adenosine even better. Using isothermal titration calorimetry, the selective binding of ATP was independently verified. This sensor has a detection limit of 29 nM ATP and it can even detect ATP in serum. By replacing Co²⁺ with Zn²⁺ to form ZIF-8 or by using CoO, the selectivity for ATP was lost. Therefore, by sophisticated material design, ultrahigh selectivity for molecular recognition can be achieved.

Probing Transient DNA Conformation Changes with an Intercalative Fluorescent Excimer

Variation of DNA conformation is important in regulating gene expression and mediating drug-DNA interactions. However, directly probing transient DNA conformation changes is challenging owing to the dynamic nature of this process. We show a label-free fluorescence method to monitor transient DNA conformation changes in DNA structures with various lengths and shapes using a DNA intercalator, K21. K21 can form transient excimers on the surface of DNA; the ratiometric emission of monomer and excimer correlate to DNA transient conformation stability in numerous DNA structures, including i-motifs, G-quadruplex structures, and single nucleotide mutation at random position. We analyzed the conformation dynamics of a single plasmid before and after enzyme digestion with confocal fluorescence microscopy. This method provides a label-free fluorescence strategy to probe transient conformation changes of DNA structures and has potential in uncovering transient genomic processes in living cells.

Controllable design of a nano-bio aptasensing interface based on tetrahedral framework nucleic acids in an integrated microfluidic platform

The limited reaction time and sample volume in the confined space of microfluidic devices give considerable importance to the development of more effective biosensing interfaces. Herein, the self-assembling of tetrahedral framework nucleic acids (FNAs) with controllable size on the interface of the microfluidic microchannels is studied. Compared with macroscopic turbulence control on traditional micro-structured microfluidic surface, the novel FNA-engineered microfluidic interface successfully constructs a 3D reaction space at nanoscale by raising DNA probes away from the surface. This FNA interface dramatically improves the reaction kinetics during molecular recognition due to extremely ordered orientation, configuration and density of DNA probes on the surface. Finally, the FNA-engineered interface is applied in a novel multi-functional microfluidic platform, towards a "one-stop" assay of Escherichia coli O157: H7 (E. coli O157: H7), integrating capture, release, enrichment, cell culture and antimicrobial susceptibility testing (AST). With the FNA-aptamer probe, we achieved an enhanced bacterial detecting efficiency (10 CFU/mL) plus excellent selectivity and precision. The appicability was strongly demonstrated when the biosensor was successfully applied in real samples, including the analysis of antibiotic susceptibility and minimum inhibitory concentration (MIC) of E. coli O157: H7 among different antibiotics. The application of FNA interface will open a wide avenue for the development of microfluidic biosensors for other pathogenic microorganisms or circulating tumor cells (CTC) simply by changing the aptamers.

Biomineralization: An Opportunity and Challenge of Nanoparticle Drug Delivery Systems for Cancer Therapy

Biomineralization is a common process in organisms to produce hard biomaterials by combining inorganic ions with biomacromolecules. Multifunctional nanoplatforms are developed based on the mechanism of biomineralization in many biomedical applications. In the past few years, biomineralization-based nanoparticle drug delivery systems for the cancer treatment have gained a lot of research attention due to the advantages including simple preparation, good biocompatibility, degradability, easy modification, versatility, and targeting. In this review, the research trends of biomineralization-based nanoparticle drug delivery systems and their applications in cancer therapy are summarized. This work aims to promote future researches on cancer therapy based on biomineralization. Rational design of nanoparticle drug delivery systems can overcome the bottleneck in the clinical transformation of nanomaterials. At the same time, biomineralization has also provided new research ideas for cancer treatment, i.e., targeted therapy, which has significantly better performance.

Bifunctional Peptide-Conjugated Gold Nanoparticles for Precise and Efficient Nucleus-Targeting Bioimaging in Live Cells

Real-time in situ imaging of organelles is increasingly important in modern biomedical analysis and diseases diagnosis. To realize this goal, organelle-targeting nanoparticles as one of the most commonly used technologies in subcellular sensing and imaging has attracted a lot of interest. The biocompatibility, specificity, and binding efficiency are especially critical for efficient organelle-targeting bioimaging. Gold nanoparticles (AuNPs) fabricated with bifunctional peptides constructed with both Au-binding affinity and nucleus-targeting ability were designed and examined for efficient nucleus-targeting bioimaging. Such a design is expected to achieve an oriented assembling of peptides by the medium of the Au-binding peptides specifically assembled on the surface of AuNPs, with the nucleus-targeting end open for accessibility. The bifunctional peptides showed strong binding affinity toward AuNPs and led to a binding capability ∼1.5 times higher than that of the bare nucleus-targeting peptides, ensuring good surface coverage of the nanoparticles for enhanced nucleus-targeting ability. Such fabricated AuNPs demonstrated over 90% cell viability after incubation for 24 h with HepG2 cells, which were highly biocompatible. Precise and efficient bioimaging of the nucleus was achieved for HepG2 cells by using the fabricated AuNPs as observed with a confocal laser scanning microscope, a dark-field/fluorescence microscope, and a transmission electron microscope. The high surface coverage and oriented binding pattern appeared to be a promising strategy for construction of organelle-targeting agencies.

Immobilization Techniques for Aptamers on Gold Electrodes for the Electrochemical Detection of Proteins: A Review

The development of reliable biosensing platforms plays a key role in the detection of proteins in clinically and environmentally derived samples for diagnostics, as well as for process monitoring in biotechnological productions. For this purpose, the biosensor has to be stable and reproducible, and highly sensitive to detect potentially extremely low concentrations and prevent the nonspecific binding of interfering compounds. In this review, we present an overview of recently published (2017–2019) immobilization techniques for aptamers on gold electrodes for the electrochemical detection of proteins. These include the direct immobilization of thiolated aptamers and the utilization of short linkers, streptavidin/biotin interaction, as well as DNA nanostructures and reduced graphene oxide as immobilization platforms. Applied strategies for signal amplification and the prevention of biofouling are additionally discussed, as they play a crucial role in the design of biosensors. While a wide variety of amplification strategies are already available, future investigations should aim to establish suitable antifouling strategies that are compatible with electrochemical measurements. The focus of our review lies on the detailed discussion of the underlying principles and the presentation of utilized chemical protocols in order to provide the reader with promising ideas and profound knowledge of the subject, as well as an update on recent discoveries and achievements.

Tailoring DNA Self-assembly to Build Hydrogels

DNA hydrogels are crosslinked polymeric networks in which DNA is used as the backbone or the crosslinker. These hydrogels are novel biofunctional materials that possess the biological character of DNA and the framed structure of hydrogels. Compared with other kinds of hydrogels, DNA hydrogels exhibit not only high mechanical strength and controllable morphologies but also good recognition ability, designable responsiveness, and programmability. The DNA used in this type of hydrogel acts as a building block for self-assembly or as a responsive element due to its sequence recognition ability and switchable structural transitions, respectively. In this review, we describe recent developments in the field of DNA hydrogels and discuss the role played by DNA in these hydrogels. Various synthetic strategies for and a range of applications of DNA hydrogels are detailed.

Target-induced in-situ formation of fluorescent DNA-templated copper nanoparticles by a catalytic hairpin assembly: application to the determination of DNA and thrombin

A fluorometric method is described for nucleic acid signal amplification through target-induced catalytic hairpin assembly with DNA-templated copper nanoparticles (Cu NPs). The toehold-mediated self-assembly of three metastable hairpins is triggered in presence of target DNA. This leads to the formation of a three-way junction structure with protruding mononucleotides at the 3' terminus. The target DNA is released from the formed branched structure and triggers another assembly cycle. As a result, plenty of branched DNA becomes available for the synthesis of Cu NPs which have fluorescence excitation/emission maxima at 340/590 nm. At the same time, the branched structure protects the Cu NPs from digestion by exonuclease III. The unreacted hairpins are digested by exonuclease III, and this warrants a lower background signal. The method can detect ssDNA (24 nt) at low concentration (44 pM) and is selective over single-nucleotide polymorphism. On addition of an aptamer, the strategy can also be applied to the quantitation of thrombin at levels as low as 0.9 nM. Graphical abstractSchematic representation of target-induced catalytic hairpin assembly to form branched DNA template for the in situ synthesis of fluorescent Cu nanoparticles.