Is graphite lithiophobic or lithiophilic?

Organic nano carbon source inducing 3D silica nanoparticles-graphene nanosheet layer on Cu current collector for high-performance anode-free lithium metal batteries

Anode-free lithium metal batteries (AFLBs) have attracted considerable attention due to their high theoretical specific capacity and absence of Li. However, the heterogeneous Li deposition and stripping on the lithiophobic Cu collector hamper AFLBs in practice. To achieve a uniform and reversible Li deposition, a carbon-based layer on the Cu collector has attracted intense interest due to its high conductivity. However, the 2D single-component carbon-based interface is inadequate lithiophilic for obtaining the homogeneous Li deposition and preventing the lithium dendrite from piercing the separator. Herein, we present a 3D embedded lithiophilic SiO2 nanoparticles-graphene nanosheet matrix (SiO2@G-M) on the Cu collector by organic nano carbon source. In this structure, the lithiophilic SiO2 nanoparticles as active points promote the homogeneous lithium nucleation and the 3D graphene nanosheet matrix offers homogenous electron distribution and voids to prevent the piercing. Finally, SiO2@G-M/Li cell shows a high coulombic efficiency of 98.62 % after 100 cycles at a high current density of 2 mA cm-2 with an areal capacity of 1 mAh cm-2.

Deeply Lithiated Carbonaceous Materials for Great Lithium Metal Protection in All-Solid-State Batteries

Protection of lithium (Li) metal electrode is a core challenge for all-solid-state Li metal batteries (ASSLMBs). Carbon materials with variant structures have shown great effect of Li protection in liquid electrolytes, however, can accelerate the solid-state electrolyte (SE) decomposition owing to the high electronic conductivity, seriously limiting their application in ASSLMBs. Here, a novel strategy is proposed to tailor the carbon materials for efficient Li protection in ASSLMBs, by in situ forming a rational niobium-based Li-rich disordered rock salt (DRS) shell on the carbon materials, providing a favorable percolating Li+ diffusion network for speeding the carbon lithiation, and enabling simultaneously improved lithiophilicity and reduced electronic conductivity of the carbon structure at deep lithiation state. Using the proposed strategy, different carbon materials, such as graphitic carbon paper and carbon nanotubes, are tailored with great ability to speed the interfacial kinetics, homogenize the Li plating/stripping processes, and suppress the SE decompositions, enabling much improved performances of ASSLMBs under various conditions approaching the practical application. This strategy is expected to create a novel roadmap of Li protection for developing reliable high-energy-density ASSLMBs.

Electrochemical Lithium Deposition on LixTi5O12

Lithium metal batteries (LMBs) have been regarded as one of the most promising next-generation high-energy-density storage devices. However, uncontrolled lithium dendrite growth leads to low Coulombic efficiencies and severe safety issues, hindering the commercialization of LMBs. Reducing the diffusion barrier of lithium is beneficial for uniform lithium deposition. Herein, a composite is constructed with Li4Ti5O12 as the skeleton of metallic lithium (Li@LixTi5O12) because Li4Ti5O12 is a "zero-strain" material and exhibits a low lithium diffusion barrier. It was found that the symmetric cells of Li@LixTi5O12 can stably cycle for over 400 h at 1 mA cm-2 in the carbonate electrolyte, significantly exceeding the usual lifespan (∼170 h) of the symmetric cell using a lithium metal electrode. In a full cell with Li@LixTi5O12 as the anode, the cathode LiFePO4 delivers a capacity retention of 78.2% after 550 cycles at 3.6C rate and an N/P ratio = 8.0. This study provides new insights for designing a practical lithium anode.

Compressible and Elastic Reduced Graphene Oxide Sponge for Stable and Dendrite-Free Lithium Metal Anodes

Dendritic Li deposition, an unstable solid-electrolyte interphase (SEI), and a nearly infinite relative volume change during cycling are three major obstacles to the practical application of Li metal batteries. Herein, we introduce a compressible and elastic reduced graphene oxide sponge (rGO-S) to simultaneously eliminate Li dendrite growth, stabilize the SEI, and accommodate the volume change. The volume change is contained by compressing and expanding the rGO-S anode, which effectively releases the Li plating-induced stress during cycling. The smooth and dense Li metal is deposited on rGO-S without dendrites, which preserves the SEI, reduces consumption of the electrolyte, and prevents the formation of Li debris. The half-cells employing rGO-S show a steady and high Coulombic efficiency. The Li@rGO-S symmetric cells demonstrate excellent cycling stability over 1200 cycles with a low overpotential. When paired with LiFePO4 (LFP), the Li@rGO-S||LFP full cells exhibit a high specific capacity (150.3 mAh g-1 at 1C), superior rate performance, and good capacity retention.

Ant-Nest-like Lithiophilic Host for Long-Life Lithium Metal Anodes

The rational design of confined host to tutor Li nucleation and deposition behavior remains a key challenge for the long stability of lithium metal anodes (LMAs), while the scalability and feasibility of the method need to be taken into concern. Herein, a biomimic strategy is designed for tutoring in-depth nucleation and bottom-up Li deposition by composing ant-nest-like lithiophilic hosts for LMAs with light-weight flexible and conductive carbon nanotubes (CNTs) as the framework, table salt (sodium chloride, NaCl) as the washable porous creator, and homogeneously dispersed nano-Si as the nucleation site. It possesses similar optimized structure as ant nests in nature and can provide large and conductive inner volume for Li storage. Combining with the interconnected passways can ensure effective ion compensation like food transport channels for ants, and the well-designed host can take effect as an individual Li anode (5 mA h cm-2 area Li loading for demonstration) and the record-long stable LMA host can be achieved for over a 2200 h lifespan with minimum volume expansion. Therefore, this biomimic strategy is developed with all commercialized battery materials, and all industry compatible production methods can provide a feasible technical path for the stable, long-cyclability, and reliable host design for LMAs.

Decline Mechanism of Graphite/Lithium Metal Hybrid Anode and Its Stabilization by Inorganic-Rich Solid Electrolyte Interface

The graphite/lithium metal hybrid anode shows great potential for achieving high-specific-energy lithium batteries. Despite the "dead lithium" problem caused by repeated stripping and deposition of Li component based on a conversion reaction, the degradation mechanism, based on intercalation reaction, of graphite in a hybrid anode is generally ignored. In this contribution, through in situ X-ray diffraction and in situ Raman analysis, we reveal that hysteresis and the mixed-phase state of graphite during deintercalation play a critical role in hybrid battery degradation. On the other hand, we successfully mitigated graphite degradation and increased the reversible capacity of the hybrid anode by introducing an inorganic-rich solid electrolyte interface. Remarkably, the hybrid anode (30% higher specific capacity compared to graphite) exhibits an average coulombic efficiency of 99.11% and retains 96.13% of initial capacity over 120 cycles. This work sheds new light on the advancement of high-specific-energy lithium secondary batteries.

Evaluation of Cathode Electrodes in Lithium-Ion Battery: Pitfalls and the Befitting Counter Electrode

Boosting energy density and reducing the cost of lithium-ion batteries are critical to accelerating their applications in transportation and grid energy storage. Battery design with increasing electrode thickness is an effective way to combine higher energy density and lower cost. However, the evaluation of electrodes with increased thickness is challenging and requires more attention. Here, some pitfalls are to be avoided and a reasonable evaluation strategy is provided for cathode electrodes regarding the choice of counter electrode. Though as the most common counter electrode, lithium metal anode is actually not suitable for evaluating cycling performance, which exhibits fast cell capacity decline, especially, in the case of areal capacity higher than 2 mAh cm^-2 . Two commercial anode materials, graphite and Li₄ Ti₅ O₁₂ (LTO) as the potential alternatives, are systematically evaluated and compared, demonstrating LTO as the more suitable choice. The thick cathode electrode coupled with LTO exhibits excellent rate capability, stable cycling performance, and easy interpretation of charge/discharge profile. The relationship between cell balance and battery performance is further analyzed in detail. This strategy enables a reasonable evaluation of the cathode electrodes and advances the designing of thick electrode.

Mitigating Concentration Polarization through Acid-Base Interaction Effects for Long-Cycling Lithium Metal Anodes

Lithium (Li) metal has attracted great attention as a promising high-capacity anode material for next-generation high-energy-density rechargeable batteries. Nonuniform Li⁺ transport and uneven Li plating/stripping behavior are two key factors that deteriorate the electrochemical performance. In this work, we propose an interphase acid-base interaction effect that could regulate Li plating/stripping behavior and stabilize the Li metal anode. ZSM-5, a class of zeolites with ordered nanochannels and abundant acid sites, was employed as a functional interface layer to facilitate Li⁺ transport and mitigate the cell concentration polarization. As a demonstration, a pouch cell with a high-areal-capacity LiNi_0.95Co_0.02Mn_0.03O₂ cathode (3.7 mAh cm^-2) and a ZSM-5 modified thin lithium anode (50 μm) delivered impressive electrochemical performance, showing 92% capacity retention in 100 cycles (375.7 mAh). This work reveals the effect of acid-base interaction on regulating lithium plating/stripping behaviors, which could be extended to developing other high-performance alkali metal anodes.

Dual-Functional Lithiophilic/Sulfiphilic Binary-Metal Selenide Quantum Dots Toward High-Performance Li-S Full Batteries

The commercial viability of lithium-sulfur batteries is still challenged by the notorious lithium polysulfides (LiPSs) shuttle effect on the sulfur cathode and uncontrollable Li dendrites growth on the Li anode. Herein, a bi-service host with Co-Fe binary-metal selenide quantum dots embedded in three-dimensional inverse opal structured nitrogen-doped carbon skeleton (3DIO FCSe-QDs@NC) is elaborately designed for both sulfur cathode and Li metal anode. The highly dispersed FCSe-QDs with superb adsorptive-catalytic properties can effectively immobilize the soluble LiPSs and improve diffusion-conversion kinetics to mitigate the polysulfide-shutting behaviors. Simultaneously, the 3D-ordered porous networks integrated with abundant lithophilic sites can accomplish uniform Li deposition and homogeneous Li-ion flux for suppressing the growth of dendrites. Taking advantage of these merits, the assembled Li-S full batteries with 3DIO FCSe-QDs@NC host exhibit excellent rate performance and stable cycling ability (a low decay rate of 0.014% over 2,000 cycles at 2C). Remarkably, a promising areal capacity of 8.41 mAh cm-2 can be achieved at the sulfur loading up to 8.50 mg cm-2 with an ultra-low electrolyte/sulfur ratio of 4.1 μL mg-1. This work paves the bi-serve host design from systematic experimental and theoretical analysis, which provides a viable avenue to solve the challenges of both sulfur and Li electrodes for practical Li-S full batteries.

Solid-State Electrolytes for Rechargeable Magnesium-Ion Batteries: From Structure to Mechanism

Rechargeable magnesium (Mg)-ion batteries have received growing attention as a next-generation battery system owing to their advantages of sufficient reserves, lower cost, better safety, and higher volumetric energy density than lithium-ion batteries. However, Mg as an anode can be easily passivated during charging/discharging by most common solvents, which are inconducive for magnesium deposition/stripping. Based on this, the development of Mg-ion solid-state electrolytes in the last decades led to the formulization of several concepts beyond previously reported designs. These exciting studies have once again sparked an interest in all-solid-state magnesium-ion batteries. In this review, Mg solid-state electrolytes, including inorganic (oxides, hydrides, and chalcogenides) and organic (metal-organic frameworks and polymers) materials are classified and summarized in detail. Moreover, the structural characteristics and the migration mechanism of Mg²⁺ ions are also discussed with a focus on pending questions and future prospects.

Overpotential-Regulated Stable Cycling of a Thin Magnesium Metal Anode

To obtain high energy density for magnesium (Mg)-metal batteries, a promising low-cost energy storage technology, a thin Mg-metal anode of tens of micrometers must be used. However, the Coulombic efficiency (CE) and the anode utilization rate (AUR) of thin Mg metal are far from sufficient to sustain a long cycle life. This drawback is closely related to the morphological instability during galvanostatic cycling. In this work, we observed that the morphological evolution of Mg metal can be controlled with a pre-applied overpotential. With a properly pre-applied overpotential (e.g., -0.5 V), we show that the average AUR and the average CE of thin Mg metal (16 μm, equivalent to 6 mA h cm^-2) in a Mg/Mo asymmetric cell can be substantially improved from 29.8 to 74.8% and from 97.7 to 99.5%, respectively, under a practical current density of 2 mA cm^-2. These advances can theoretically improve the energy density and cycle life of Mg-S batteries to more than 1000 W h kg^-1 and 100 cycles, respectively. This work deepens our understanding of the morphological and compositional evolution of Mg metal during stripping and plating processes and suggests a facile and effective method to substantially improve the cycling stability of thin Mg metal.

Li-Ca Alloy Composite Anode with Ant-Nest-Like Lithiophilic Channels in Carbon Cloth Enabling High-Performance Li Metal Batteries

Constructing a three-dimensional (3D) multifunctional hosting architecture and subsequent thermal infusion of molten Li to produce advanced Li composite is an effective strategy for stable Li metal anode. However, the pure liquid Li is difficult to spread across the surface of various substrates due to its large surface tension and poor wettability, hindering the production and application of Li composite anode. Herein, heteroatomic Ca is doped into molten Li to generate Li-Ca alloy, which greatly regulates the surface tension of the molten alloy and improves the wettability against carbon cloth (CC). Moreover, a secondary network composed of CaLi2 intermetallic compound with interconnected ant-nest-like lithiophilic channels is in situ formed and across the primary scaffold of CC matrix by infiltrating molten Li-Ca alloy into CC and then cooling treatment (LCAC), which has a larger and lithiophilic surface to enable uniform Li deposition into interior space of the hybrid scaffold without Li dendrites. Therefore, LCAC exhibits a long-term lifespan for 1100 h under a current density of 5 mA cm-2 with fixed areal capacity of 5 mAh cm-2. Remarkably, full cells paired with practical-level LiFePO4 cathode of 2.45 mAh cm-2 deliver superior performance.

Regulating the Li Nucleation/Growth Behavior via Cu2O Nanowire Array and Artificial Solid Electrolyte Interphase toward Highly Stable Li Metal Anode

Lithium (Li) metal has been considered to be the most promising anode material for next-generation rechargeable batteries. Unfortunately, the hazards induced by dendrite growth and volume fluctuation hinder its commercialized application. Here, a three-dimensional (3D) current collector composed of a vertically aligned Cu2O nanowire that is tightly coated with a polydopamine protective layer is developed to solve the encountered issues of lithium metal batteries (LMBs). The Cu2O nanowire arrays (Cu2O NWAs) provide abundant lithiophilic sites for inducing Li nucleation selectively to form a thin Li layer around the nanowires and direct subsequent Li deposition. The well-defined nanochannel works well in confining the Li growth spatially and buffering the volume change during the repeated cycling. The PDA coatings adhered onto the outline of the Cu2O NWAs serve as the artificial solid electrolyte interface to isolate the electrode and electrolyte and retain the interfacial stability. Moreover, the increased specific area of copper foam (CF) can dissipate the local current density and further suppress the growth of Li dendrites. As a result, CF@Cu2O NWAs@PDA realizes a dendrite-free morphology and the assembled symmetrical batteries can work stably for over 1000 h at 3 mA cm-2. When CF@Cu2O NWAs@PDA is coupled with a LiFePO4 cathode, the full cells exhibit improved cycle stability and rate performance.

Accurately Localizing Multiple Nanoparticles in a Multishelled Matrix Through Shell-to-Core Evolution for Maximizing Energy-Storage Capability

Robust and fast lithium energy storage with a high energy density is highly desired to accelerate the market adoption of electric vehicles. To realize such a goal requires the development of electrode materials with a high capacity, however, such electrode materials suffer from huge volume expansion and induced short cycling life. Here, using tin (Sn) as an example, an ideal structure is designed to effectively solve these problems by separately localizing multiple Sn nanoparticles in a nitrogen-doped carbon hollow multishelled structure with duplicated layers for carbon shell (Sn NPs@N_x C HoMS-DL). The fabricated composite can promote ion and electron diffusion owing to the conductive network formed by connected multiple shells and cores, effectively buffer the volume expansion, and maintain a stable electrode-electrolyte interface. Despite the challenging fabrication, such a structure is realized through an innovative and facile synthesis strategy of "in situ evolution of shell to core", which is applicable for diverse low-melting-point materials. As expected, such a structure enables the high-capacity electrode material to realize nearly its theoretical lithium-storage capability: the developed Sn NPs@N_x C HoMS-DL electrode maintains 96% of its theoretical capacity after 2000 cycles at 2C.

Recent Advances and Strategies toward Polysulfides Shuttle Inhibition for High-Performance Li-S Batteries

Lithium-sulfur (Li-S) batteries are regarded as the most promising next-generation energy storage systems due to their high energy density and cost-effectiveness. However, their practical applications are seriously hindered by several inevitable drawbacks, especially the shuttle effects of soluble lithium polysulfides (LiPSs) which lead to rapid capacity decay and short cycling lifespan. This review specifically concentrates on the shuttle path of LiPSs and their interaction with the corresponding cell components along the moving way, systematically retrospect the recent advances and strategies toward polysulfides diffusion suppression. Overall, the strategies for the shuttle effect inhibition can be classified into four parts, including capturing the LiPSs in the sulfur cathode, reducing the dissolution in electrolytes, blocking the shuttle channels by functional separators, and preventing the chemical reaction between LiPSs and Li metal anode. Herein, the fundamental aspect of Li-S batteries is introduced first to give an in-deep understanding of the generation and shuttle effect of LiPSs. Then, the corresponding strategies toward LiPSs shuttle inhibition along the diffusion path are discussed step by step. Finally, general conclusions and perspectives for future research on shuttle issues and practical application of Li-S batteries are proposed.

Cryo-Electron Tomography of Highly Deformable and Adherent Solid-Electrolyte Interphase Exoskeleton in Li-Metal Batteries with Ether-Based Electrolyte

The 3D nanocomposite structure of plated lithium (Li_Metal ) and solid electrolyte interphases (SEI), including a polymer-rich surficial passivation layer (SEI exoskeleton) and inorganic SEI "fossils" buried inside amorphous Li matrix, is resolved using cryogenic transmission electron microscopy. With ether-based DOLDME-LiTFSI electrolyte, LiF and Li₂ O nanocrystals are formed and embedded in a thin but tough amorphous polymer in the SEI exoskeleton. The fast Li-stripping directions are along [ 1 ¯ 10 ] or [ 12 1 ¯ ] , which produces eight exposed {111} planes at halfway charging. Full Li stripping produces completely sagging, empty SEI husks that can sustain large bending and buckling, with the smallest bending radius of curvature observed approaching tens of nanometers without apparent damage. In the 2nd round of Li plating, a thin Li_BCC sheet first nucleates at the current collector, extends to the top end of the deflated SEI husk, and then expands its thickness. The apparent zero wetting angle between Li_BCC and the SEI interior means that the heterogeneous nucleation energy barrier is zero. Due to its complete-wetting property and chemo-mechanical stability, the SEI largely prevents further reactions between the Li metal and the electrolyte, which explains the superior performance of Li-metal batteries with ether-based electrolytes. However, uneven refilling of the SEI husks results in dendrite protrusions and some new SEI formation during the 2nd plating. A strategy to form bigger SEI capsules during the initial cycle with higher energy density than the following cycles enables further enhanced Coulombic efficiency to above 99%.

Stable Li metal anode in a lithiophilic shuttle

Suppressing severe lithium (Li) dendrite growth is a formidable challenge for high-energy-density lithium (Li) metal batteries (LMBs). Conventional lithiophilic coatings, despite their ability to improve the Li plating morphology, generate a compact conversion layer with a low electrolyte volume fraction, impeding the mass- and charge-transfers at the electrode interface and offsetting the benefits brought by lithiophilicity. Herein, a lithiophilic shuttle is obtained by the superposition of very thin layered copper oxide (L-CuO) flakes. After the conversion process, conjoined channels with a high electrolyte volume fraction can be maintained in the lithiophilic shuttle for fast and lateral Li⁺ transfer. In addition to the inherent high-Li-affinity and layered-structure-induced capacitive feature, the lithiophilic shuttle can afford stable and reversible Li plating/stripping at high current densities up to 3 mA cm^-2 in LMBs with a practical capacity of 5 mA h cm^-2. This work provides a new hierarchical lithiophilic structure to push forward high-energy-density LMBs for practical applications.

Sustainable Phytic Acid-Zinc Anticorrosion Interface for Highly Reversible Zinc Metal Anodes

Although aqueous zinc-ion batteries (AZIBs) promise high capacity, low cost, and environmental friendliness, the Zn metal anode suffers from limited reversibility and unsatisfied lifespan arising from severe dendritic growth and inevitable interfacial corrosion. In this regard, constructing the artificial protective interfacial layer on the Zn metal foil has been recognized as an effective strategy to realize durable AZIBs. Inspired by the phytic acid (PA) anticorrosion conversion coating layer for industrial metal protection, herein, we designed a dense and conformal PA-Zn complex layer on the Zn anodes through a feasible, rapid wet-chemistry chelating reaction. The in situ formed uniform PA-Zn coating layer on the surface of Zn anodes can serve as a protective layer inhibiting corrosion reaction. More importantly, the desolvation energy of Zn²⁺ is effectively reduced by the PA-Zn layer, which gives rise to enhanced kinetics of Zn plating/stripping for uniform Zn deposition. Consequently, the PA-Zn metal anode delivered a low overpotential of 36 mV and a long lifespan over 1400 h at 2 mA cm^-2 with a capacity of 1 mA h cm^-2. The feasibility of PA-Zn anodes is also verified in the as-constructed PANI@V₂O₅||Zn full cells. This work paves the way for designing a multifunctional interface layer on Zn metal and promotes the development of high-performance AZIBs.

Achieving Uniform Li Plating/Stripping at Ultrahigh Currents and Capacities by Optimizing 3D Nucleation Sites and Li2 Se-Enriched SEI

Lithium (Li) has garnered considerable attention as an alternative anodes of next-generation high-performance batteries owing to its prominent theoretical specific capacity. However, the commercialization of Li metal anodes (LMAs) is significantly compromised by non-uniform Li deposition and inferior electrolyte-anode interfaces, particularly at high currents and capacities. Herein, a hierarchical three-dimentional structure with CoSe2 -nanoparticle-anchored nitrogen-doped carbon nanoflake arrays is developed on a carbon fiber cloth (CoSe2 -NC@CFC) to regulate the Li nucleation/plating process and stabilize the electrolyte-anode interface. Owing to the enhanced lithiophilicity endowed by CoSe2 -NC, in situ-formed Li2 Se and Co nanoparticles during initial Li nucleation, and large void space, CoSe2 -NC@CFC can induce homogeneous Li nucleation/plating, optimize the solid electrolyte interface, and mitigate volume change. Consequently, the CoSe2 -NC@CFC can accommodate Li with a high areal capacity of up to 40 mAh cm-2 . Moreover, the Li/CoSe2 -NC@CFC anodes possess outstanding cycling stability and lifespan in symmetric cells, particularly under ultrahigh currents and capacities (1600 h at 10 mA cm-2 /10 mAh cm-2 and 5 mA cm-2 /20 mAh cm-2 ). The Li/CoSe2 -NC@CFC//LiFePO4 full cell delivers impressive long-term performance and favorable flexibility. The developed CoSe2 -NC@CFC provides insights into the development of advanced Li hosts for flexible and stable LMAs.

The pathway toward practical application of lithium-metal anodes for nonaqueous secondary batteries

The revolution of automotive vehicles (from petrol vehicles to electric vehicles) has set high demands for the performance of batteries. Lithium-metal batteries (LMBs) show great potential owing to their high energy density but encounter poor cycle life and safety issues. It is of great significance to reveal LMB failure mechanisms and understand their relationship with battery performance. This review presents an overview of the state-of-the-art Li-metal anodes, with an emphasis on two typical failure modes: capacity degradation and dendritic growth of Li metal. The critical correlations between the composition, structure and failure are explained point by point. The chemical and electrochemical stabilities of the lithium anode are discussed. Particularly, for the first time, five types of lithium-metal anodes are classified to develop a comprehensive understanding of LMBs. Furthermore, strategies are suggested to improve the practical performance of LMBs, including material innovation, electrolyte modification and advanced characterization.

Tin-Based Anode Materials for Stable Sodium Storage: Progress and Perspective

Because of concerns regarding shortages of lithium resources and the urgent need to develop low-cost and high-efficiency energy-storage systems, research and applications of sodium-ion batteries (SIBs) have re-emerged in recent years. Herein, recent advances in high-capacity Sn-based anode materials for stable SIBs are highlighted, including tin (Sn) alloys, Sn oxides, Sn sulfides, Sn selenides, Sn phosphides, and their composites. The reaction mechanisms between Sn-based materials and sodium are clarified. Multiphase and multiscale structural optimizations of Sn-based materials to achieve good sodium-storage performance are emphasized. Full-cell designs using Sn-based materials as anodes and further development of Sn-based materials are discussed from a commercialization perspective. Insights into the preparation of future high-performance Sn-based anode materials and the construction of sodium-ion full batteries with a high energy density and long service life are provided.

Construction of a High-Stability and Low-Nucleation-Barrier Cu3Sn Alloy Layer on Carbon Paper for Dendrite-Free Li Metal Deposition

The construction of three-dimensional lithiophilic hosts is one of the most effective approaches for achieving the uniform nucleation and alleviating the volume changes of the Li metal. Unfortunately, some lithiophilic materials suffer from severe mechanical degradation resulting from the large volume expansion during lithiation, which causes a heterogeneous Li deposition. Herein, a low-nucleation-barrier Cu₃Sn alloy layer on a carbon paper (Cu₃Sn/CP) is constructed by a facile co-electrodeposition method for the Li anode framework. Density functional theory calculations show that the Cu₃Sn alloy has a higher binding energy (-2.31 eV) than pure Sn (-1.97 eV) due to the electron-deficient state of Sn in the alloy phase, which enables the lithiophilic Sn to have increased affinity for Li. Additionally, the uniformly distributed Cu particles can evenly disperse the electric field on the surface of the carbon fiber and act as a "metal barrier" to inhibit the volume expansion of the Sn particles during lithiation, thereby enhancing the electrochemical stability of the alloy modification layer. As a result, the Cu₃Sn/CP anode framework exhibits an exceptionally low nucleation overpotential (∼10 mV), a high and steady Coulombic efficiency (>98.5% for more than 200 cycles), and a long lifespan up to 1150 h. The full cells with LiFePO₄ as a cathode show favorable cycling performance at 1 C with a capacity retention rate of 95.2%. The construction of the Cu₃Sn alloy layer in this work sheds light on the design of a high-stability lithiophilic host for the dendrite-free Li metal anode.

Moderate Specific Surface Areas Help Three-Dimensional Frameworks Achieve Dendrite-Free Potassium-Metal Anodes

The inevitable problem of dendrites growth has hampered the further development of K metal anodes. Constructing a three-dimensional anode framework and potassiophilic nanocoating is an effective way to enlarge the specific surface area, reduce the local current density, and inhibit the formation of K dendrites. However, the effects of the electrochemically active surface area (ECSA) of the framework on deposition behavior have not been clarified. Hence, SnS₂ nanosheets with different sizes are loaded on the surface of carbon paper (SnS₂@CP) to improve the potassiophilicity and realize dendrite-free K-metal anodes. Experiments reveal that the size of SnS₂ nanosheets would determine the ECSA of the framework, while the ECSA reveals the relative sizes of specific surface areas of frameworks. Excessive or limited specific surface areas will cause morphological collapse or weak potassiophilicity during potassiation, respectively, thus leading to high nucleation overpotential. The moderate specific surface area and abundant and stable potassiophilic sites prompt the SnS₂@CP framework to achieve uniform electrodeposition of K. A low nucleation overpotential of 11.2 mV and a cycle life of more than 800 h are exhibited at a current density of 0.25 mA cm^-2, indicating the directional strategy for stable and safe K metal anodes.

Solid electrolytes for solid-state Li/Na–metal batteries: inorganic, composite and polymeric materials

This feature article presents the electrolyte synthetic approaches, design strategies, and merging materials that may address the critical issues of solid electrolytes for solid-state Li/Na–metal batteries.

Mechanistic Probing of Encapsulation and Confined Growth of Lithium Crystals in Carbonaceous Nanotubes

Encapsulation of lithium in the confined spaces within individual nanocapsules is intriguing and highly desirable for developing high-performance Li metal anodes. This work aims for a mechanistic understanding of Li encapsulation and its confined growth kinetics inside 1D enclosed spaces. To achieve this, amorphous carbon nanotubes are employed as a model host using in situ transmission electron microscopy. The carbon shells have dual roles, providing geometric/mechanical constraints and electron/ion transport channels, which profoundly alter the Li growth patterns. Li growth/dissolution takes place via atom addition/removal at the free surfaces through Li⁺ diffusion along the shells in the electric field direction, resulting in the formation of unusual Li structures, such as poly-crystalline nanowires and free-standing 2D ultrathin (1-2 nm) Li membranes. Such confined front-growth processes are dominated by Li {110} or {200} growing faces, distinct from the root growth of single-crystal Li dendrites outside the nanotubes. Controlled experiments show that high lithiophilicity/permeability, enabled by sufficient nitrogen/oxygen doping or pre-lithiation, is critical for the stable encapsulation of lithium inside carbonaceous nanocapsules. First-principles-based calculations reveal that N/O doping can reduce the diffusion barrier for Li⁺ penetration, and facilitate Li filling driven by energy minimization associated with the formation of low-energy Li/C interfaces.

A Morphologically Stable Li/Electrolyte Interface for All-Solid-State Batteries Enabled by 3D-Micropatterned Garnet

Morphological degradation at the Li/solid-state electrolyte (SSE) interface is a prevalent issue causing performance fading of all-solid-state batteries (ASSBs). To maintain the interfacial integrity, most ASSBs are operated under low current density with considerable stack pressure, which significantly limits their widespread usage. Herein, a novel 3D-micropatterned SSE (3D-SSE) that can stabilize the morphology of the Li/SSE interface even under relatively high current density and limited stack pressure is reported. Under the pressure of 1.0 MPa, the Li symmetric cell using a garnet-type 3D-SSE fabricated by laser machining shows a high critical current density of 0.7 mA cm^-2 and stable cycling over 500 h under 0.5 mA cm^-2 . This excellent performance is attributed to the reduced local current density and amplified mechanical stress at the Li/3D-SSE interface. These two effects can benefit the flux balance between Li stripping and creep at the interface, thereby preventing interfacial degradation such as void formation and dendrite growth.

Advances in wearable textile-based micro energy storage devices: structuring, application and perspective

The continuous expansion of smart microelectronics has put forward higher requirements for energy conversion, mechanical performance, and biocompatibility of micro-energy storage devices (MESDs). Unique porosity, superior flexibility and comfortable breathability make the textile-based structure a great potential in wearable MESDs. Herein, a timely and comprehensive review of this field is provided according to recent research advances. The following aspects, device construction of textile-based MESDs (TMESDs), fabric processing of textile components and smart functionalization (e.g., mechanical reliability, energy harvesting, sensing, self-charging and self-healing, etc.) are discussed and summarized thoroughly. Also, the perspectives on the microfabrication processes and multiple applications of TMESDs are elaborated.

Graphite prelithiation by solid electrochemical corrosion of lithium metal with a superficial mosaic structure

A transformative concept of solid electrochemical corrosion has been put forward, in which solid-state electrolyte LiPON has been applied to replace the liquid one to prelithiate graphite with Li-metal. Thus, high prelithiation efficiency and low polarization of the treated anode can be obtained, with a unique mosaic structure left at the surface.

Engineering lithiophilic Ni-Al@LDH interlayers on a garnet-type electrolyte for solid-state lithium metal batteries

In this work, a lithiophilic Ni-Al@LDH interlayer is engineered at the Li_6.4La₃Zr_1.4Ta_0.6O₁₂ (LLZTO) electrolyte and Li anode interface. The Ni-Al@LDH interlayer can significantly reduce the interfacial resistance as well as give excellent cycling performance both in a symmetric Li//Li cell and solid full lithium metal batteries.

All-Solid-State Thin Film μ-Batteries for Microelectronics

Continuous advances in microelectronics and micro/nanoelectromechanical systems enable the use of microsized energy storage devices, namely solid-state thin-film μ-batteries. Different from the current button batteries, the μ-battery can directly be integrated on microchips forming a very compact "system on chip" since no liquid electrolyte is used in the μ-battery. The all-solid-state battery (ASSB) that uses solid-state electrolyte has become a research trend because of its high safety and increased capacity. The solid-state thin-film μ-battery belongs to the family of ASSB but in a small format. However, a lot of scientific and technical issues and challenges are to be resolved before its real application, including the ionic conductivity of the solid-state electrolyte, the electrical conductivity of the electrode, integration technologies, electrochemical-induced strain, etc. To achieve this goal, understanding the processing of thin films and fundamentals of ion transfer in the solid-state electrolytes and hence in the μ-batteries becomes utmost important. This review therefore focuses on solid-state ionics and provides inside of ion transportation in the solid state and effects of chemistry on electrochemical behaviors and proposes key technology for processing of the μ-battery.

Universal lithiophilic interfacial layers towards dendrite-free lithium anodes for solid-state lithium-metal batteries

Solid-state lithium-metal batteries (SSLMBs) using garnet Li_6.4La₃Zr_1.4Ta_0.6O₁₂ (LLZTO) as the solid electrolyte are expected to conquer the safety concerns of high energy Li batteries with organic liquid electrolytes owing to its nonflammable nature and good mechanical strength. However, the poor interfacial contact between the Li anode and LLZTO greatly restrains the practical applications of the electrolyte, because large polarization, dendritic Li formation and penetration can occur at the interfaces. Here, an effective method is proposed to improve the wettability of the LLZTO toward lithium and reduce the interfacial resistance by engineering universal lithiophilic interfacial layers. Thanks to the in-situ formed lithiophilic and ionic conductive Co/Li₂O interlayers, the symmetric Li/CoO-LLZTO/Li batteries present much smaller overpotential, ultra-low areal specific resistance (ASR, 12.3 Ω cm²), high critical current density (CCD, 1.1 mA cm^-2), and outstanding cycling performance (1696 h at a current density of 0.3 mA cm^-2) at 25 °C. Besides, the solid-state Li/CoO-LLZTO/LFP cells deliver an excellent electrochemical performance with a high coulombic efficiency of ~100% and a long cycling time over 185 times. Surprisingly, the high-voltage (4.6 V) solid state Li/CoO-LLZTO/Li_1.4Mn_0.6Ni_0.2Co_0.2O_2.4 (LMNC622) batteries can also realize an ultra-high specific capacity (232.5 mAh g^-1) under 0.1 C at 25 °C. This work paves an effective way for practical applications of the dendrite-free SSLMBs.

Ultrastable Anode/Electrolyte Interface in Solid-State Lithium-Metal Batteries Using LiCux Nanowire Network Host

High interfacial resistance and uncontrollable lithium (Li) dendrite are major challenges in solid-state Li-metal batteries (SSLMBs), as they lead to premature short-circuiting and failure of SSLMBs. Here, we report the synthesis of a composite anode comprising a three-dimensional LiCu_x nanowire network host infiltrated with Li (Li* anode) with low interfacial impedance and superior electrochemical performance. The Li* anode is fabricated by dissolving Cu foil into molten Li followed by solidification. The Li* anode exhibits good wettability with Li_6.4La₃Zr_1.4Ta_0.6O₁₂ (LLZTO) and high mechanical strength, rendering low Li*/LLZTO interfacial impedance, homogeneous deposition of Li, and suppression of Li dendrites. Consequently, the Li* anode-based symmetric cells and full cells with LiNi_0.88Co_0.1Al_0.02O₂ (NCA), LiFePO₄ (LFP), and FeF₂ cathodes deliver remarkable electrochemical performance. Specifically, the Li*/LLZTO/Li* symmetrical cell achieves a remarkably long cycle lifetime of 10 000 h with 0.1 mA·cm^-2; the Li*/LLZTO/NCA full cell maintains capacity retention of 73.4% after 500 cycles at 0.5C; and all-solid-state Li*/LLZTO/FeF₂ full cell achieves a reversible capacity of 147 mAh·g^-1 after 500 cycles at 100 mA·g^-1. This work demonstrates potential design tactics for an ultrastable Li*/garnet interface to enable high-performance SSLMBs.

Sustainable and Robust Graphene Cellulose Paper Decorated with Lithiophilic Au Nanoparticles to Enable Dendrite-free and High-Power Lithium Metal Anode

Lithium metal anodes (LMAs) with high energy density have recently captured increasing attention for development of next-generation batteries. However, practical viability of LMAs is hindered by the uncontrolled Li dendrite growth and infinite dimension change. Even though constructing 3D conductive skeleton has been regarded as a reliable strategy to prepare stable and low volume stress LMAs, engineering the renewable and lithiophilic conductive scaffold is still a challenge. Herein, a robust conductive scaffold derived from renewable cellulose paper, which is coated with reduced graphene oxide and decorated with lithiophilic Au nanoparticles, is engineered for LMAs. The graphene cellulose fibres with high surface area can reduce the local current density, while the well-dispersed Au nanoparticles can serve as lithiophilic nanoseeds to lower the nucleation overpotential of Li plating. The coupled relationship can guarantee uniform Li nucleation and unique spherical Li growth into 3D carbon matrix. Moreover, the natural cellulose paper possesses outstanding mechanical strength to tolerate the volume stress. In virtue of the modulated deposition behaviour and near-zero volume change, the hybrid LMAs can achieve reversible Li plating/stripping even at an ultrahigh current density of 10 mA cm^-2 as evidenced by high Coulombic efficiency (97.2 % after 60 cycles) and ultralong lifespan (1000 cycles) together with ultralow overpotential (25 mV). Therefore, this strategy sheds light on a scalable approach to multiscale design versatile Li host, promising highly stable Li metal batteries to be feasible and practical.

Manipulating Oxidation of Silicon with Fresh Surface Enabling Stable Battery Anode

Silicon (Si)-based material is a promising anode material for next-generation lithium-ion batteries (LIBs). Herein, we report the fabrication of a silicon oxide-carbon (SiO_x/C) nanocomposite through the reaction between silicon particles with fresh surface and H₂O in a mild hydrothermal condition, as well as conducting carbon coating synchronously. We found that controllable oxidation could be realized for Si particles to produce uniform SiO_x after the removal of the native passivation layer. The uniform oxidation and conductive coating offered the as-fabricated SiO_x/C composite good stability at both particle and electrode level over electrochemical cycling. The as-fabricated SiO_x/C composite delivered a high reversible capacity of 1133 mAh g^-1 at 0.5 A g^-1 with 89.1% capacity retention after 200 cycles. With 15 wt % SiO_x/C composite, graphite-SiO_x/C hybrid electrode displayed a high reversible specific capacity of 496 mAh g^-1 and stable electrochemical cycling with a capacity retention of 90.1% for 100 cycles.

Synthesis and properties of poly(1,3-dioxolane) in situ quasi-solid-state electrolytes via a rare-earth triflate catalyst

We report a rare-earth triflate catalyst Sc(OTf)3 for the ring-opening polymerization of 1,3-dioxolane and the in situ production of a quasi-solid-state poly(1,3-dioxolane) electrolyte, which not only demonstrates a superior ionic conductivity of 1.07 mS cm-1 at room temperature, but achieves dendrite-free lithium deposition and a high Coulombic efficiency of 92.3% over 200 Li plating/striping cycles.

Design of double-shell TiO2@SnO2 nanotubes via atomic layer deposition for improved lithium storage

TiO₂@Void@SnO₂ nanotubes synthesized by atomic layer deposition (ALD) display high capacity for lithium storage.

A facile method for the synthesis of a sintering dense nano-grained Na3Zr2Si2PO12 Na+-ion solid-state electrolyte

We report dense Na₃Zr₂Si₂PO₁₂ with an average grain size of 546 ± 58 nm and prepared by a facile method.

Mesoporous carbon host material for stable lithium metal anode

Lithium (Li) metal is a promising anode material for next-generation batteries because of its low standard reduction potential (-3.04 V vs. SHE) and high specific capacity (3860 mA h g-1). However, it is still challenging to directly use Li metal as anode material in commercial batteries because of unstable Li dendrite formation and accumulated solid-electrolyte interphase. Possible methods that can suppress the unwanted formation of Li dendrites are (i) by increasing the electrode surface area and (ii) formation of porosity for confining Li. Here, we tested microporous (<2 nm) carbon and mesoporous (2-50 nm) carbon as host materials for the Li metal anode to avoid their degradation during cycling of lithium metal batteries (LMBs). Mesoporous carbon was more effective than microporous carbon as a host material to confine the Li metal and the lifetime of mesoporous carbon was more than twice as long as those of the Cu foil and microporous carbon. After confirmed better anode performance of mesoporous carbon host material, we applied Li-plated mesoporous carbon as an anode in a lithium-sulfur battery (Li-S) full cell. This research work suggests that mesopores, in spite of their low specific surface area, are better than micropores in stabilizing the Li metal and that a mesoporous host material can be applied to Li metal anodes for use in next-generation battery applications.