Characterization of Magnetic Resonance Thermal Imaging Signal Artifact During Magnetic Resonance Guided Laser-Induced Thermal Therapy

MR-guided laser interstitial thermal therapy in the treatment of brain tumors and epilepsy

MR-guided Laser Interstitial Thermal Therapy (MRgLITT) is a minimally invasive neurosurgical technique increasingly used for the treatment of drug-resistant epilepsy and brain tumors. Utilizing near-infrared light energy delivery guided by real-time MRI thermometry, MRgLITT enables precise ablation of targeted brain tissues, resulting in limited corridor-related morbidity and expedited postoperative recovery. Since receiving CE marking in 2018, the adoption of MRgLITT has expanded to more than 40 neurosurgical centers across Europe. In epilepsy treatment, MRgLITT can be applied to various types of focal lesional epilepsy, including mesial temporal lobe epilepsy, hypothalamic hamartoma, focal cortical dysplasias, periventricular heterotopias, cavernous malformations, dysembryoplastic neuroepithelial tumors (DNET), low-grade gliomas, tuberous sclerosis, and in disconnective surgeries. In neuro-oncology, MRgLITT is used for treating newly diagnosed and recurrent primary brain tumors, brain metastases, and radiation necrosis. This comprehensive review presents an overview of the current evidence and technical considerations for the use of MRgLITT in treating various pathologies associated with drug-resistant epilepsy and brain tumors.

Appearance and modeling of bubble artifacts in intracranial magnetic resonance-guided laser interstitial thermal therapy (MRg-LITT) temperature images

PURPOSE

To understand if unexplained signal artifacts in MRg-LITT proton resonance frequency- (PRF-) shift thermometry images are caused by air bubbles or hemorrhages, and to characterize their effects on temperature measurements.

METHODS

Retrospective image data from an IRB-approved clinical trial of intracranial MRg-LITT were inspected for asymmetric distortions observed in phase data during ablations, which have been previously reported as likely hemorrhages. A total of eight patient cases were selected: seven with artifact occurrence and one without. Mathematical image models for air bubbles or hemorrhages were implemented to estimate the size of the air bubble or hemorrhage needed to explain the clinically observed phase artifacts. Correlations and Bland-Altman analyses were used to determine if an air bubble model or a hemorrhage model was better correlated to the clinical data. The model was used to inject bubbles into clean PRF phase data without artifacts to examine how temperature profile distortions change with slice orientation. The simulated air-bubble injected data were compared to clinical data containing artifacts to examine the bubbles' effects on temperature and thermal damage estimates.

RESULTS

The model demonstrated that air bubbles up to approximately 1 cm in diameter could explain the clinically observed phase artifacts. The bubble model predicts that a hemorrhage would have to be 2.2 times as large as an air bubble in order to explain the same extent of phase distortion observed in clinical data. Air bubbles had 16% percent higher correlations to the clinical PRF phase data than hemorrhages, even after rescaling the hemorrhage phases to better match the data. The air bubble model also explains how the phase artifacts lead to both large positive and large negative temperature errors, up to ±100 °C, which could cascade to damage estimate errors of several millimeters.

CONCLUSION

Results showed that the artifacts are likely caused by air bubbles rather than hemorrhages, which may be introduced before heating or appear during heating. Manufacturers and users of devices that rely upon PRF-shift thermometry should be aware these phase distortions from bubble artifacts can result in large temperature errors.

Real-time automatic temperature regulation during in vivo MRI-guided laser-induced thermotherapy (MR-LITT)

Precise control of tissue temperature during Laser-Induced Thermotherapy (LITT) procedures has the potential to improve the clinical efficiency and safety of such minimally invasive therapies. We present a method to automatically regulate in vivo the temperature increase during LITT using real-time rapid volumetric Magnetic Resonance thermometry (8 slices acquired every second, with an in-plane resolution of 1.4 mmx1.4 mm and a slice thickness of 3 mm) using the proton-resonance frequency (PRF) shift technique. The laser output power is adjusted every second using a feedback control algorithm (proportional-integral-derivative controller) to force maximal tissue temperature in the targeted region to follow a predefined temperature-time profile. The root-mean-square of the difference between the target temperature and the measured temperature ranged between 0.5 °C and 1.4 °C, for temperature increases between + 5 °C to + 30 °C above body temperature and a long heating duration (up to 15 min), showing excellent accuracy and stability of the method. These results were obtained on a 1.5 T clinical MRI scanner, showing a potential immediate clinical application of such a temperature controller during MR-guided LITT.

Laser Interstitial Thermal Therapy for Cavernous Malformations: A Systematic Review

Background

Microsurgical resection of intracranial cavernous malformations (CM) is regarded as the standard treatment, but in recent years, there has been a trend toward minimally invasive procedures like ablation of such lesions by using laser interstitial thermal therapy (LITT).

Methods

A systematic search using keywords ‘laser interstitial thermal therapy’ OR ‘LITT’ AND ‘cavernoma’ OR ‘cavernous angiomas’ OR ‘cavernous malformations’ was conducted in MEDLINE (PubMed), Scopus, Embase, and Cochrane electronic bibliographic databases and studies reporting the outcome of LITT procedure on intracranial CM were included. The demographic data, symptoms of patients, location and size of the lesion, and surgical outcome were extracted from the articles.

Result

Six studies, reporting the outcome of 33 patients were included in this review. In 26 patients, CM was identified as the epileptogenic foci and in others, CM was the source of headache or focal neurological deficits. LITT led to a satisfactory outcome in all patients except for three who achieved improvement in symptoms after the open resection of the lesion. Most of the post-operative complications were transient and resolved at the time of the last follow up. Cyst formation at the previous ablated CM site was reported as the long-term complication of LITT in one case.

Conclusion

LITT can provide a comparable outcome to the open resection of CMs, by having less invasiveness, even in deep and eloquent area lesions, and complications that are often temporary and disappear gradually. However, technical issues, such as thermal monitoring during the procedure, are considered a challenge for this procedure in CMs. Further studies with a larger population are needed to report this method's long-term outcome and complications on CMs.

Model-Based Thermometry for Laser Ablation Procedure Using Kalman Filters and Sparse Temperature Measurements

In this work, we implement a data-assimilation Bayesian framework for the reconstruction of the spatiotemporal profile of the tissue temperature during laser irradiation. The predictions of a physical model simulating the heat transfer in the tissue are associated with sparse temperature measurements, using an Unscented Kalman Filter. We compare a standard state-estimation filtering procedure with a joint-estimation (state and parameters) approach: whereas in the state-estimation only the temperature is evaluated, in the joint-estimation the filter corrects also uncertain model parameters (i.e., the medium thermal diffusivity, and laser beam properties). We have tested the method on synthetic temperature data, and on the temperature measured on agar-gel phantom and porcine liver with fiber optic sensors. The joint-estimation allows retrieving an accurate estimate of the temperature distribution with a maximal error < 1.5 C in both synthetic and liver 1D data, and < 2 C in phantom 2D data. Our approach allows also suggesting a strategy for optimizing the temperature estimation based on the positions of the sensors. Under the constraint of using only two sensors, optimal temperature estimations are obtained when one sensor is placed in proximity of the source, and the other one is in a non-symmetrical position.

Controlling Signal Artifact With Software Threshold Imaging for Magnetic Resonance-Guided Laser Interstitial Thermal Therapy

BACKGROUND

Magnetic resonance-guided laser interstitial thermal therapy (MRgLITT) uses intraoperative temperature mapping and thermal damage estimates to guide ablations of intracranial targets. In select cases, signal artifact presents at the target site and impairs intraprocedural decision-making by obscuring the visualization of both temperature imaging and the thermal damage estimate calculation. To date, the etiology and impact of signal artifact are unknown. However, user-selected MRgLITT software settings may play a role in generating artifact.

OBJECTIVE

To assess the effect of the thresholding feature in MRgLITT software on signal artifact generation during intracranial ablations.

METHODS

Ablations were performed with the Visualase MRI-guided Laser Ablation System (Medtronic). For each LITT procedure, raw thermal data were extracted at a reference threshold of 40 and reprocessed at 5 additional threshold values ranging from 35 to 60. Artifact growth rates relative to threshold values were derived using simple linear regressions and then assessed within the context of laser power and duration using Pearson correlations.

RESULTS

A total of 33 patients were included, with 28 artifact-containing and 5 artifact-free cases. For artifact-containing cases, a 13% increase in artifact area occurred for every 1-point increase in threshold (R2 > 0.99). Artifact growth rates were not correlated with laser power (r = 0.15, P = .44) or duration (r = 0.0049, P = .98). One of the 5 artifact-free cases developed artifact at a threshold of 60.

CONCLUSION

Artifact generation is likely multifactorial involving tissue properties and software settings. Operators can minimize software-introduced artifact by reducing threshold values.

Adopting MR-guided stereotactic laser ablations for epileptic lesions: initial clinical experience and lessons learned

OBJECTIVE

MR-guided laser interstitial thermal therapy (MRgLITT) is a minimally invasive technique for ablating brain lesions under real-time MRI feedback and control of the ablation process. The Medtronic Visualase system was recently approved for use in Europe and Israel. We report our initial technical experience using the system in the first 16 cases in which the system was used to ablate focal epileptogenic lesions.

METHODS

We included all consecutive patients with intractable epilepsy who underwent MRgLITT procedures between 2018 and 2020. We reviewed medical charts and imaging studies of patients. Post-ablation MRIs were used to calculate ablation volumes.

RESULTS

Seventeen MRgLITT procedures were performed in 16 patients. One cooling catheter/laser fiber assemblies were placed per patient. Indications for surgery were intractable epilepsy due to TLE (n = 7), suspected low-grade glioma (n = 4), radiological cortical dysplasia (n = 1), hypothalamic hamartoma (n = 1), and MR-negative foci (n = 3). Ablations were made using 30 to 70% of the maximal energy of the Visualase system. We used serial ablations as needed along the tract of the catheter by pulling back the optic fiber; the length of the lesion ranged between 7.4 and 38.1 mm. Ablation volume ranged between 0.27 and 6.78 mm³. Immediate post-ablation MRI demonstrated good ablation of the epileptic lesion in 16/17 cases. In one case with mesial temporal sclerosis, no ablation was performed due to suboptimal position of the catheter. That patient was successfully reoperated at a later date. Mean follow-up was 14.9 months (± 11.6 months). Eleven patients had follow-up longer than 12 months. Good seizure control (Engel I, A) was achieved in 7/11 patients (63%) and 1/11 (9%) had significant improvement in seizure frequency (Angle IIIa). Three patients (27%) did not experience improvement in their seizure frequency (Engel IV, B), and one of these patients died during the follow-up period from sudden unexpected death of epilepsy (SUDEP). No immediate or delayed neurological complications were documented in any of the cases during the follow-up period.

CONCLUSIONS

MRgLITT is a promising technique and can be used safely as an alternative to open resection in both lesional and non-lesional intractable epilepsy cases. In our local series, the success rate of epilepsy surgery was comparable to recent publications.