Structural Alteration of Rice Pectin Affects Cell Wall Mechanical Strength and Pathogenicity of the Rice Blast Fungus Under Weak Light Conditions

Smart controlled-release nanopesticides based on metal-organic frameworks

The practical utilization rates of conventional pesticide formulations by target organisms are very low, which results in the pollution of ecological environments and the formation of pesticide residues in agricultural products. Water-based nanopesticide formulations could become alternative and effective formulations to eventually resolve the main issues of conventional pesticide formulations. In this feature article, we describe the design concept of smart (stimuli-responsive) controlled-release nanopesticides, which are created toward hierarchical targets (pests, pathogens, and foliage) in response to multidimensional stimuli from physiological and environmental factors (such as sunlight) of target organisms and plants, for achieving enhanced insecticidal and fungicidal efficacies. The pore sizes and functionalities of metal-organic frameworks (MOFs) can be fine-tuned through the choice of metal-containing units and organic ligands. Tailor-made MOF nanoparticles with large microporous or mesoporous sizes, as well as good biocompatibility and high thermal, mechanical, and chemical durabilities, are used to load pesticides within these pores followed by coating of plant polyphenols and natural polymers for stimuli-responsive controlled pesticide release. This feature article highlights our works on smart controlled-release MOF-based nanopesticides and also includes related works from other laboratories. The future challenges and promising prospects of smart controlled-release MOF-based nanopesticides are also discussed.

Decrypting Molecular Mechanisms Involved in Counteracting Copper and Nickel Toxicity in Jack Pine (Pinus banksiana) Based on Transcriptomic Analysis

The remediation of copper and nickel-afflicted sites is challenged by the different physiological effects imposed by each metal on a given plant system. Pinus banksiana is resilient against copper and nickel, providing an opportunity to build a valuable resource to investigate the responding gene expression toward each metal. The objectives of this study were to (1) extend the analysis of the Pinus banksiana transcriptome exposed to nickel and copper, (2) assess the differential gene expression in nickel-resistant compared to copper-resistant genotypes, and (3) identify mechanisms specific to each metal. The Illumina platform was used to sequence RNA that was extracted from seedlings treated with each of the metals. There were 449 differentially expressed genes (DEGs) between copper-resistant genotypes (RGs) and nickel-resistant genotypes (RGs) at a high stringency cut-off, indicating a distinct pattern of gene expression toward each metal. For biological processes, 19.8% of DEGs were associated with the DNA metabolic process, followed by the response to stress (13.15%) and the response to chemicals (8.59%). For metabolic function, 27.9% of DEGs were associated with nuclease activity, followed by nucleotide binding (27.64%) and kinase activity (10.16%). Overall, 21.49% of DEGs were localized to the plasma membrane, followed by the cytosol (16.26%) and chloroplast (12.43%). Annotation of the top upregulated genes in copper RG compared to nickel RG identified genes and mechanisms that were specific to copper and not to nickel. NtPDR, AtHIPP10, and YSL1 were identified as genes associated with copper resistance. Various genes related to cell wall metabolism were identified, and they included genes encoding for HCT, CslE6, MPG, and polygalacturonase. Annotation of the top downregulated genes in copper RG compared to nickel RG revealed genes and mechanisms that were specific to nickel and not copper. Various regulatory and signaling-related genes associated with the stress response were identified. They included UGT, TIFY, ACC, dirigent protein, peroxidase, and glyoxyalase I. Additional research is needed to determine the specific functions of signaling and stress response mechanisms in nickel-resistant plants.

Gene expression profiling of Jack Pine (Pinus banksiana) under copper stress: Identification of genes associated with copper resistance

Understanding the genetic response of plants to copper stress is a necessary step to improving the utility of plants for environmental remediation and restoration. The objectives of this study were to: 1) characterize the transcriptome of Jack Pine (Pinus banksiana) under copper stress, 2) analyze the gene expression profile shifts of genotypes exposed to copper ion toxicity, and 3) identify genes associated with copper resistance. Pinus banksiana seedlings were treated with 10 mmoles of copper and screened in a growth chamber. There were 6,213 upregulated and 29,038 downregulated genes expressed in the copper resistant genotypes compared to the susceptible genotypes at a high stringency based on the false discovery rate (FDR). Overall, 25,552 transcripts were assigned gene ontology. Among the top upregulated genes, the response to stress, the biosynthetic process, and the response to chemical stimuli terms represented the highest proportion of gene expression for the biological processes. For the molecular function category, the majority of expressed genes were associated with nucleotide binding followed by transporter activity, and kinase activity. The majority of upregulated genes were located in the plasma membrane while half of the total downregulated genes were associated with the extracellular region. Two candidate genes associated with copper resistance were identified including genes encoding for heavy metal-associated isoprenylated plant proteins (AtHIP20 and AtHIP26) and a gene encoding the pleiotropic drug resistance protein 1 (NtPDR1). This study represents the first report of transcriptomic responses of a conifer species to copper ions.

Constitutive expression of apple endo-POLYGALACTURONASE1 in fruit induces early maturation, alters skin structure and accelerates softening

During fruit ripening, polygalacturonases (PGs) are key contributors to the softening process in many species. Apple is a crisp fruit that normally exhibits only minor changes to cell walls and limited fruit softening. Here, we explore the effects of PG overexpression during fruit development using transgenic apple lines overexpressing the ripening-related endo-POLYGALACTURONASE1 gene. MdPG1-overexpressing (PGox) fruit displayed early maturation/ripening with black seeds, conversion of starch to sugars and ethylene production occurring by 80 days after pollination (DAP). PGox fruit exhibited a striking, white-skinned phenotype that was evident from 60 DAP and most likely resulted from increased air spaces and separation of cells in the hypodermis due to degradation of the middle lamellae. Irregularities in the integrity of the epidermis and cuticle were also observed. By 120 DAP, PGox fruit cracked and showed lenticel-associated russeting. Increased cuticular permeability was associated with microcracks in the cuticle around lenticels and was correlated with reduced cortical firmness at all time points and extensive post-harvest water loss from the fruit, resulting in premature shrivelling. Transcriptomic analysis suggested that early maturation was associated with upregulation of genes involved in stress responses, and overexpression of MdPG1 also altered the expression of genes involved in cell wall metabolism (e.g. β-galactosidase, MD15G1221000) and ethylene biosynthesis (e.g. ACC synthase, MD14G1111500). The results show that upregulation of PG not only has dramatic effects on the structure of the fruit outer cell layers, indirectly affecting water status and turgor, but also has unexpected consequences for fruit development.

CO2 mesophyll conductance regulated by light: a review

MAIN CONCLUSION

Light quality and intensity regulate plant mesophyll conductance, which has played an essential role in photosynthesis by controlling leaf structural and biochemical properties. Mesophyll conductance (g_m), a crucial physiological factor influencing the photosynthetic rate of leaves, is used to describe the resistance of CO₂ from the sub-stomatal cavity into the chloroplast up to the carboxylation site. Leaf structural and biochemical components, as well as external environmental factors such as light, temperature, and water, all impact g_m. As an essential factor of plant photosynthesis, light affects plant growth and development and plays a vital role in regulating g_m as well as determining photosynthesis and yield. This review aimed to summarize the mechanisms of g_m response to light. Both structural and biochemical perspectives were combined to reveal the effects of light quality and intensity on the g_m, providing a guide for selecting the optimal conditions for intensifying photosynthesis in plants.

Maintenance of Methyl-Esterified Pectin Level in Pollen Mother-Cell Stages Is Required for Microspore Development

Pectin modification and degradation are vital for plant development, although the underlying mechanisms are still not well understood. Furthermore, reports on the function of pectin in early pollen development are limited. We generated OsPME-FOX rice lines with little methyl-esterified pectin even in the early-pollen mother-cell stage due to overexpression of the gene encoding pectin-methylesterase. Overexpression of OsPME1 in rice increased the activity of PME, which decreased the degree of pectin methyl esterification in the cell wall. OsPME1-FOX grew normally and showed abnormal phenotypes in anther and pollen development, especially in terms of the pollen mother-cell stage. In addition, we examined modifications of cell-wall polysaccharides at the cellular level using antibodies against polysaccharides. Immunohistochemical staining using LM19 and LM20 showed that methyl-esterified pectin distribution and the pectin contents in pollen mother-cell wall decreased in OsPME1-FOX compared with the wild type. Thus, the maintenance of methyl-esterified pectin plays a role in degrading and maintaining the pollen mother-cell wall during microspore development.

Pectin functionalized metal-organic frameworks as dual-stimuli-responsive carriers to improve the pesticide targeting and reduce environmental risks

Encapsulation of active ingredients into intelligent response controlled release carriers has been recognized as a promising approach to enhance the utilization efficiency and reduce the environmental risks of pesticides. In this work, an intelligent redox and pectinase dual stimuli-responsive pesticide delivery system was constructed by bonding pectin with metal-organic frameworks (FeMOF nanoparticles) which were loaded with pyraclostrobin (PYR@FeMOF-pectin nanoparticles). The successful fabrication of PYR@FeMOF-pectin nanoparticles was proved by a series of physicochemical characterizations. The results indicated that the loading capacity of PYR@FeMOF-pectin nanoparticles for pyraclostrobin was approximately 20.6%. The pectin covered on the surface of PYR@FeMOF nanoparticles could protect pyraclostrobin from photolysis and improve their spreadability on rice blades effectively. Different biological stimuli associated with Magnaporthe oryzae could trigger the release of pyraclostrobin from the pesticide-loaded core-shell nanoparticles, resulting in the death of pathogens. The bioactivity survey determined that PYR@FeMOF-pectin nanoparticles had a superior fungicidal activity and a longer duration against Magnaporthe oryzae than pyraclostrobin suspension concentrate. In addition, the FeMOF-pectin nanocarriers showed no obvious phytotoxicity and could enhance the shoot length and root length of rice plants. More importantly, PYR@FeMOF-pectin nanoparticles had an 8-fold reduction in acute toxicity to zebrafish than that of pyraclostrobin suspension concentrate. Therefore, the dual-responsive FeMOF-pectin nanocarriers have great potential for realizing site-specific pesticide delivery and promoting plant growth.

lncRNA7 and lncRNA2 modulate cell wall defense genes to regulate cotton resistance to Verticillium wilt

In plants, long noncoding RNAs (lncRNAs) regulate disease resistance against fungi and other pathogens. However, the specific mechanism behind this regulation remains unclear. In this study, we identified disease resistance-related lncRNAs as well as their regulating genes and assessed their functions by infection of cotton (Gossypium) chromosome segment substitution lines with Verticillium dahliae. Our results demonstrated that lncRNA7 and its regulating gene Pectin methylesterase inhibitor 13 (GbPMEI13) positively regulated disease resistance via the silencing approach, while ectopic overexpression of GbPMEI13 in Arabidopsis (Arabidopsis thaliana) promoted growth and enhanced resistance to V. dahliae. In contrast, lncRNA2 and its regulating gene Polygalacturonase 12 (GbPG12) negatively regulated resistance to V. dahliae. We further found that fungal disease-related agents, including the pectin-derived oligogalacturonide (OG), could downregulate the expression of lncRNA2 and GbPG12, leading to pectin accumulation. Conversely, OG upregulated the expression of lncRNA7, which encodes a plant peptide phytosulfokine (PSK-α), which was confirmed by lncRNA7 overexpression and Ultra Performance Liquid Chromatography Tandem Mass Spectrometry (UPLC-MS) experiments. We showed that PSK-α promoted 3-Indoleacetic acid (IAA) accumulation and activated GbPMEI13 expression through Auxin Response Factor 5. Since it is an inhibitor of pectin methylesterase (PME), GbPMEI13 promotes pectin methylation and therefore increases the resistance to V. dahliae. Consistently, we also demonstrated that GbPMEI13 inhibits the mycelial growth and spore germination of V. dahliae in vitro. In this study, we demonstrated that lncRNA7, lncRNA2, and their regulating genes modulate cell wall defense against V. dahliae via auxin-mediated signaling, providing a strategy for cotton breeding.

Effects of polygalacturonase overexpression on pectin distribution in the elongation zones of roots under aluminium stress

The roots of many plant species contain large amounts of pectin and it contributes to the formation of the rhizosphere. In the present study, the relationship between the root-tip pectin content and aluminium (Al) tolerance in wild-type (WT) and demethylesterified pectin degradation enzyme gene overexpressor (OsPG2-FOX) rice lines was compared. OsPG2-FOX rice showed reduced pectin content in roots, even under control conditions; Al treatment reduced root elongation and the pectin content in the root elongation zone. Wild-type rice showed more pectin accumulation in the root elongation zone after Al treatment. Relative to WT rice, OsPG2-FOX rice showed more Al accumulation in the root elongation zone. These results indicate that the amount of pectin influences Al tolerance and that the distribution of pectin in the root elongation zone inhibits Al accumulation in rice roots. Pectin accumulation in cell walls in the root elongation zone may play a role in protecting rice plants from the Al-induced inhibition of root elongation by regulating pectin distribution.

Phloem anatomy and function as shaped by the cell wall

The partitioning of assimilated carbon is a complex process that involves the loading, long-distance transport, and subsequent unloading of carbohydrates from source to sink tissues. The network of plumbing that facilitates this coordinated process is the phloem tissue. Our understanding of the physiology of phloem transport has grown tremendously since the modern theory of mass flow was first put forward, aided by the concomitant progress of technology and experimental methodologies. Recent findings have put a renewed emphasis on the underlying anatomy of the phloem, and in particular the important role that cell walls play in enabling the high-pressure flow of photoassimilates through the sieve element. This review will briefly summarize the foundational work in phloem anatomy and highlight recent work exploring the physiology of phloem cell wall structure and mechanics.