Sodium alendronate loaded poly(l-lactide- co-glycolide) microparticles immobilized on ceramic scaffolds for local treatment of bone defects

A Facile Crystallization Strategy to Turn Calcium Bisphosphonates into Novel Osteogenesis-Inducing Biomaterials

Insoluble metal bisphosphonates (BPs) are considered an ideal alternative to the soluble counterparts in regenerative medicine due to their increased BP release profile, but still present undesired properties (e.g., low stability, uncontrolled degradation, and poor biocompatibility). Through a simple crystallization on a solid calcium hydroxyapatite (HA)-based substrate from a BP precursor solution in 30 days, a series of insoluble calcium BP (CaBP) crystals are developed. These crystals, including calcium alendronate (CaAln), calcium pamidronate (CaPam), calcium incadronate (CaInc), calcium risedronate (CaRis), calcium zoledronate (CaZol), and calcium di-minodronate (Ca(Min)2 ), present high purity, regular morphologies and excellent biodegradability. It is demonstrated that these CaBPs can induce osteogenic differentiation of adipose-derived mesenchymal stem cells in vitro in the absence of other osteogenic inducers. It is further found that CaBP induces bone formation more effectively in a femur defect rabbit model in three months but with a lower in vivo hematotoxicity than the clinically used HA during osteogenesis. It is believed that these desired biological properties arise from the capability of the insoluble CaBPs in releasing BPs in a sustained manner for stimulating osteogenesis. This work provides a significant strategy for turning CaBPs into novel biomaterials for tissue regeneration and demonstrates their great potential in the clinic.

Biomedical applications of three-dimensional bioprinted craniofacial tissue engineering

Anatomical complications of the craniofacial regions often present considerable challenges to the surgical repair or replacement of the damaged tissues. Surgical repair has its own set of limitations, including scarcity of the donor tissues, immune rejection, use of immune suppressors followed by the surgery, and restriction in restoring the natural aesthetic appeal. Rapid advancement in the field of biomaterials, cell biology, and engineering has helped scientists to create cellularized skeletal muscle-like structures. However, the existing method still has limitations in building large, highly vascular tissue with clinical application. With the advance in the three-dimensional (3D) bioprinting technique, scientists and clinicians now can produce the functional implants of skeletal muscles and bones that are more patient-specific with the perfect match to the architecture of their craniofacial defects. Craniofacial tissue regeneration using 3D bioprinting can manage and eliminate the restrictions of the surgical transplant from the donor site. The concept of creating the new functional tissue, exactly mimicking the anatomical and physiological function of the damaged tissue, looks highly attractive. This is crucial to reduce the donor site morbidity and retain the esthetics. 3D bioprinting can integrate all three essential components of tissue engineering, that is, rehabilitation, reconstruction, and regeneration of the lost craniofacial tissues. Such integration essentially helps to develop the patient-specific treatment plans and damage site-driven creation of the functional implants for the craniofacial defects. This article is the bird's eye view on the latest development and application of 3D bioprinting in the regeneration of the skeletal muscle tissues and their application in restoring the functional abilities of the damaged craniofacial tissue. We also discussed current challenges in craniofacial bone vascularization and gave our view on the future direction, including establishing the interactions between tissue-engineered skeletal muscle and the peripheral nervous system.

Recent advances in regenerative biomaterials

Nowadays, biomaterials have evolved from the inert supports or functional substitutes to the bioactive materials able to trigger or promote the regenerative potential of tissues. The interdisciplinary progress has broadened the definition of 'biomaterials', and a typical new insight is the concept of tissue induction biomaterials. The term 'regenerative biomaterials' and thus the contents of this article are relevant to yet beyond tissue induction biomaterials. This review summarizes the recent progress of medical materials including metals, ceramics, hydrogels, other polymers and bio-derived materials. As the application aspects are concerned, this article introduces regenerative biomaterials for bone and cartilage regeneration, cardiovascular repair, 3D bioprinting, wound healing and medical cosmetology. Cell-biomaterial interactions are highlighted. Since the global pandemic of coronavirus disease 2019, the review particularly mentions biomaterials for public health emergency. In the last section, perspectives are suggested: (i) creation of new materials is the source of innovation; (ii) modification of existing materials is an effective strategy for performance improvement; (iii) biomaterial degradation and tissue regeneration are required to be harmonious with each other; (iv) host responses can significantly influence the clinical outcomes; (v) the long-term outcomes should be paid more attention to; (vi) the noninvasive approaches for monitoring in vivo dynamic evolution are required to be developed; (vii) public health emergencies call for more research and development of biomaterials; and (viii) clinical translation needs to be pushed forward in a full-chain way. In the future, more new insights are expected to be shed into the brilliant field-regenerative biomaterials.

Bone healing study of alendronate combined with enoxaparin sodium bone cement in rabbits with bone defects

BACKGROUND

To observe the effect of enoxaparin sodium-polymethyl methacrylate (ES-PMMA) bone cement supplemented with alendronate (AN) on bone repair of bone defects in New Zealand rabbits.

METHODS

Twenty-seven New Zealand rabbits were randomly divided into ES/AN, ES-PMMA and PMMA groups, with a total of 27 New Zealand rabbits. The drugs loaded in 40 g bone cement powder were as follows: ES/AN group 8000 AxaIU enoxaparin (ES) and 200 mg alendronate (AN), ES-PMMA group 8000 AxaIU enoxaparin (ES), PMMA group without drugs. A bone defect model with a length of 10 mm and a diameter of 5 mm was made from the left tibia of rabbits, and the prepared bone cement was placed in the tibia defect. At 4 weeks, 8 weeks and 12 weeks after the operation, 3 rabbits in each group were sacrificed, and left tibia samples were collected for histological scoring, HE staining and Masson staining. Bone mineral density and new bone volume were measured by imaging, and the related data were processed by one-way ANOVA and least significance difference (LSD) post hoc test.

RESULTS

(1) Bone mineral density (BMD, mg/mm3) around the bone defect: at the 4th week, BMD in the ES/AN group was higher than that in the PMMA group; at the 8th week, the BMD in the ES/AN group was significantly higher than that in the other two groups; and at the 12th week, the BMD in the ES/AN group was significantly higher than that in the other two groups. (2) New bone volume (BV, mm3): at the 4th week, BV in the ES/AN group was significantly higher than that in the other two groups, BV in the ES/AN group was significantly higher than that in the other two groups at the 8th and 12th weeks, and BV in the ES-PMMA group was higher than that in the PMMA group. (3) Histological score: at the 4th and 8th weeks, the histological score of the ES/AN group was higher than that of the PMMA group, and at the 12th week, the histological score of the ES/AN group was higher than that of the other two groups. (4) Cortical bone thickness (μm): at the 4th, 8th and 12th weeks, the cortical bone thickness in the ES/AN group was higher than that in the other two groups, and the cortical bone thickness in the ES-PMMA group was higher than that in the PMMA group. (5) The percentage of mature area of new bone in the ES/AN group was higher than that in the other two groups at the 4th week, and at the 8th and 12th weeks, the percentage of mature area of new bone in the ES/AN group and ES-PMMA group was significantly higher than that in the PMMA group.

CONCLUSION

(1) Enoxaparin sodium bone cement supplemented with alendronate was superior to enoxaparin sodium bone cement and PMMA bone cement in promoting bone repair of tibial bone defects in New Zealand rabbits. (2) Enoxaparin sodium bone cement is superior to PMMA bone cement in promoting bone repair, showing a certain osteogenic potential.

Strontium ranelate incorporated 3D porous sulfonated PEEK simulating MC3T3-E1 cell differentiation

Polyetheretherketone (PEEK) has been used as an implant material because it has similar mechanical properties to natural bone. However, inferior osseointegration and bioinertness hamper the clinical application of PEEK. In this study, the surfaces of sulfonated three-dimensional (3D) PEEK porous structures were loaded with different concentrations of strontium ranelate, a compound commonly used in the treatment or prevention of osteoporosis by promoting bone formation and inhibiting bone resorption. Field-emission scanning electron microscopy was used to characterize the topography of the structures, elemental carbon, oxygen and strontium contents were measured by X-ray photoelectron spectroscopy, and surface zeta potentials and water-contact angle were also measured. The results indicated that strontium ranelate was successfully loaded onto the 3D porous structures. In vitro cellular results showed that strontium ranelate-treated sulfonated PEEK (SP-SR) strengthened the adhesion of MC3T3-E1 cells. The activity of alkaline phosphatase, collagen secretion and extracellular matrix mineralization deposition of MC3T3-E1 cells were also improved on the surface of SP-SR. These results indicate that SP-SR could serve a new implant candidate for surgical treatment.

Three Decades of Research on Recombinant Collagens: Reinventing the Wheel or Developing New Biomedical Products?

Collagens provide the building blocks for diverse tissues and organs. Furthermore, these proteins act as signaling molecules that control cell behavior during organ development, growth, and repair. Their long half-life, mechanical strength, ability to assemble into fibrils and networks, biocompatibility, and abundance from readily available discarded animal tissues make collagens an attractive material in biomedicine, drug and food industries, and cosmetic products. About three decades ago, pioneering experiments led to recombinant human collagens' expression, thereby initiating studies on the potential use of these proteins as substitutes for the animal-derived collagens. Since then, scientists have utilized various systems to produce native-like recombinant collagens and their fragments. They also tested these collagens as materials to repair tissues, deliver drugs, and serve as therapeutics. Although many tests demonstrated that recombinant collagens perform as well as their native counterparts, the recombinant collagen technology has not yet been adopted by the biomedical, pharmaceutical, or food industry. This paper highlights recent technologies to produce and utilize recombinant collagens, and it contemplates their prospects and limitations.

Surface-Modified Poly(l-lactide-co-glycolide) Scaffolds for the Treatment of Osteochondral Critical Size Defects-In Vivo Studies on Rabbits

Poly(l-lactide-co-glycolide) (PLGA) porous scaffolds were modified with collagen type I (PLGA/coll) or hydroxyapatite (PLGA/HAp) and implanted in rabbits osteochondral defects to check their biocompatibility and bone tissue regeneration potential. The scaffolds were fabricated using solvent casting/particulate leaching method. Their total porosity was 85% and the pore size was in the range of 250-320 µm. The physico-chemical properties of the scaffolds were evaluated using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffractometry (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), sessile drop, and compression tests. Three types of the scaffolds (unmodified PLGA, PLGA/coll, and PLGA/HAp) were implanted into the defects created in New Zealand rabbit femoral trochlears; empty defect acted as control. Samples were extracted after 1, 4, 12, and 26 weeks from the implantation, evaluated using micro-computed tomography (µCT), and stained by Masson-Goldner and hematoxylin-eosin. The results showed that the proposed method is suitable for fabrication of highly porous PLGA scaffolds. Effective deposition of both coll and HAp was confirmed on all surfaces of the pores through the entire scaffold volume. In the in vivo model, PLGA and PLGA/HAp scaffolds enhanced tissue ingrowth as shown by histological and morphometric analyses. Bone formation was the highest for PLGA/HAp scaffolds as evidenced by µCT. Neo-tissue formation in the defect site was well correlated with degradation kinetics of the scaffold material. Interestingly, around PLGA/coll extensive inflammation and inhibited tissue healing were detected, presumably due to immunological response of the host towards collagen of bovine origin. To summarize, PLGA scaffolds modified with HAp are the most promising materials for bone tissue regeneration.