Metabolomics analysis of poly(l-lactic acid) nanofibers' performance on PC12 cell differentiation

Advanced Hollow Cathode Discharge Plasma Treatment of Unique Bilayered Fibrous Nerve Guidance Conduits for Enhanced/Oriented Neurite Outgrowth

Despite all recent progresses in nerve tissue engineering, critical-sized nerve defects are still extremely challenging to repair. Therefore, this study targets the bridging of critical nerve defects and promoting an oriented neuronal outgrowth by engineering innovative nerve guidance conduits (NGCs) synergistically possessing exclusive topographical, chemical, and mechanical cues. To do so, a mechanically adequate mixture of polycaprolactone (PCL) and polylactic-co-glycolic acid (PLGA) was first carefully selected as base material to electrospin nanofibrous NGCs simulating the extracellular matrix. The electrospinning process was performed using a newly designed 2-pole air gap collector that leads to a one-step deposition of seamless NGCs having a bilayered architecture with an inner wall composed of highly aligned fibers and an outer wall consisting of randomly oriented fibers. This architecture is envisaged to afford guidance cues for the extension of long neurites on the underlying inner fiber alignment and to concurrently provide a sufficient nutrient supply through the pores of the outer random fibers. The surface chemistry of the NGCs was then modified making use of a hollow cathode discharge (HCD) plasma reactor purposely designed to allow an effective penetration of the reactive species into the NGCs to eventually treat their inner wall. X-ray photoelectron spectroscopy (XPS) results have indeed revealed a successful O2 plasma modification of the inner wall that exhibited a significantly increased oxygen content (24 → 28%), which led to an enhanced surface wettability. The treatment increased the surface nanoroughness of the fibers forming the NGCs as a result of an etching effect. This effect reduced the ultimate tensile strength of the NGCs while preserving their high flexibility. Finally, pheochromocytoma (PC12) cells were cultured on the NGCs to monitor their ability to extend neurites which is the base of a good nerve regeneration. In addition to remarkably improved cell adhesion and proliferation on the plasma-treated NGCs, an outstanding neural differentiation occurred. In fact, PC12 cells seeded on the treated samples extended numerous long neurites eventually establishing a neural network-like morphology with an overall neurite direction following the alignment of the underlying fibers. Overall, PCL/PLGA NGCs electrospun using the 2-pole air gap collector and O2 plasma-treated using an HCD reactor are promising candidates toward a full repair of critical nerve damage.

Fabrication and evaluation of 3D printed poly(l-lactide) copolymer scaffolds for bone tissue engineering

The application of poly(L-lactic acid) (PLLA) in tissue engineering is limited due to its brittleness and uncontrollable degradation rate. In this study, the flexible p-dioxanone (PDO) and highly reactive glycolide (GA) units were introduced into PLLA segments by chemical modification to prepare poly(l-lactide-ran-p-dioxanone-ran-glycolide) (PLPG) copolymers. The copolymers were then processed into the PLPG scaffold by a 3D printing technology. The physicochemical properties of the PLPG copolymers were studied by NMR, DSC, XRD, GPC, and SEM. Furthermore, the mechanical properties, degradation properties, and biocompatibility of the PLPG scaffolds were also studied. The results showed that introducing PDO and GA units disrupted the regularity of PLLA, decreasing the crystallinity of the PLPG copolymers. However, introducing PDO and GA units could effectively improve the mechanical and degradation properties of the PLLA scaffolds. In vitro cell culture experiments indicated that the PLPG scaffolds supported proliferation, growth, and differentiation of MC3T3-E1 cells. The PLPG scaffolds reported herein, with controllable degradation rates and mechanical performance, may find applications in bone tissue engineering.

The toxicity of nanoparticles and their interaction with cells: an in vitro metabolomic perspective

Nowadays, nanomaterials (NMs) are widely present in daily life due to their significant benefits, as demonstrated by their application in many fields such as biomedicine, engineering, food, cosmetics, sensing, and energy. However, the increasing production of NMs multiplies the chances of their release into the surrounding environment, making human exposure to NMs inevitable. Currently, nanotoxicology is a crucial field, which focuses on studying the toxicity of NMs. The toxicity or effects of nanoparticles (NPs) on the environment and humans can be preliminary assessed in vitro using cell models. However, the conventional cytotoxicity assays, such as the MTT assay, have some drawbacks including the possibility of interference with the studied NPs. Therefore, it is necessary to employ more advanced techniques that provide high throughput analysis and avoid interferences. In this case, metabolomics is one of the most powerful bioanalytical strategies to assess the toxicity of different materials. By measuring the metabolic change upon the introduction of a stimulus, this technique can reveal the molecular information of the toxicity induced by NPs. This provides the opportunity to design novel and efficient nanodrugs and minimizes the risks of NPs used in industry and other fields. Initially, this review summarizes the ways that NPs and cells interact and the NP parameters that play a role in this interaction, and then the assessment of these interactions using conventional assays and the challenges encountered are discussed. Subsequently, in the main part, we introduce the recent studies employing metabolomics for the assessment of these interactions in vitro.

Dual-Function Fibrous Co-Polypeptide Scaffolds for Neural Tissue Engineering

This paper reports dual-function (high cell attachment and cell viability) fibrous scaffolds featuring aligned fibers, displaying good biocompatibility and no cytotoxicity. These scaffolds are fabricated through the electrospinning of a co-polypeptide comprising molar equivalents of N₆ -carbobenzyloxy-l-lysine and γ-benzyl-l-glutamate, with the lysine moieties enhancing cell adhesion and the neural-stimulating glutamate moieties improving cell viability. These new scaffolds allow neural cells to attach and grow effectively without any special surface treatment or coating. Pheochromocytoma (PC-12) cells grown on these scaffolds exhibit better neuronal activity and longer neurite length, relative to those grown on scaffolds prepared from their respective homo-polypeptides. When the scaffolds are partially hydrolyzed such that they present net positive charge and increased hydrophilicity, the cell viability and neurite growth both increase further. Accordingly, these novel co-polypeptide fibrous scaffolds have potential applications in neural tissue engineering.

The interaction mechanism of nickel ions with L929 cells based on integrative analysis of proteomics and metabolomics data

The aim of this paper was to study the toxicity mechanism of nickel ions (Ni2+) on L929 cells by combining proteomics and metabolomics. First, iTRAQ-based proteomics and LC/MS metabolomics analyses were used to determine the protein and metabolite expression profiles in L929 cells after treatment with 100 μM Ni2+ for 12, 24 and 48 h. A total of 177, 2191 and 2109 proteins and 40, 60 and 74 metabolites were found to be differentially expressed. Then, the metabolic pathways in which both differentially expressed proteins and metabolites were involved were identified, and three pathways with proteins and metabolites showing upstream and downstream relationships were affected at all three time points. Furthermore, the protein-metabolite-metabolic pathway network was constructed, and two important metabolic pathways involving 4 metabolites and 17 proteins were identified. Finally, the functions of the important screened metabolic pathways, metabolites and proteins were investigated and experimentally verified. Ni2+ mainly affected the expression of upstream proteins in the glutathione metabolic pathway and the arginine and proline metabolic pathway, which further regulated the synthesis of downstream metabolites, reduced the antioxidant capacity of cells, increased the level of superoxide anions and the ratio of GSSG to GSH, led to oxidative stress, affected energy metabolism and induced apoptosis.

“Invisible” orthodontics by polymeric “clear” aligners molded on 3D-printed personalized dental models

The malalignment of teeth is treated classically by metal braces with alloy wires, which has an unfavorable influence on the patients appearance during the treatment. With the development of digitization, computer simulation and three-dimensional (3D) printing technology, herein, a modern treatment was tried using clear polymeric aligners, which were fabricated by molding polyurethane films via thermoforming on the 3D-printed personalized dental models. The key parameters of photocurable 3D printing of dental models and the mechanical properties of the clear aligner film material were examined. The precision of a 3D-printed dental model mainly relied on characteristics of photocurable resin, the resolution of light source and the exposure condition, which determined the eventual shape of the molded clear aligner and thus the orthodontic treatment efficacy. The biocompatibility of the polyurethane film material was confirmed through cytotoxicity and hemolysis tests in vitro. Following a series of 3D-printed personalized dental models and finite element analysis to predict and plan the fabrication and orthodontic processes, corresponding clear aligners were fabricated and applied in animal experiments, which proved the efficacy and biocompatibility in vivo. Clinical treatments of 120 orthodontic cases were finally carried out with success, which highlights the advantage of the clear aligners as an esthetic, compatible and efficient appliance.

Omics Technologies for High-Throughput-Screening of Cell-Biomaterial Interactions

Recent research effort in biomaterial development has largely focused on engineering bio-instructive materials to stimulate specific cell signaling. Assessing the biological performance of these materials using time-consuming and trial-and-error traditional...