A Multi-Parameter, Predictive Model of Starch Hydrolysis in Barley Beer Mashes

A key first step in the production of beer is the mashing process, which enables the solubilization and subsequent enzymatic conversion of starch to fermentable sugars. Mashing performance depends primarily on temperature, but also on a variety of other process parameters, including pH and mash thickness (known as the “liquor-to-grist” ratio). This process has been studied for well over 100 years, and yet essentially all predictive modeling efforts are alike in that only the impact of temperature is considered, while the impacts of all other process parameters are largely ignored. A set of statistical and mathematical methods collectively known as Response Surface Methodology (RSM) is commonly applied to develop predictive models of complex processes such as mashing, where performance depends on multiple parameters. For this study, RSM was used to design and test a set of experimental mash conditions to quantify the impact of four process parameters—temperature (isothermal), pH, aeration, and the liquor-to-grist ratio—on extract yield (total and fermentable) and extract composition in order to create a robust, yet simple, predictive model. In contrast to previous models of starch hydrolysis in a mash, a unique aspect of the model developed here was the quantification of significant parameter interaction effects, the most notable of which was the interaction between temperature and mash thickness (i.e., the liquor-to-grist ratio). This interaction had a sizeable impact on important mash performance metrics, such as the total extract yield and the fermentability of the resultant wort. The development of this model is of great future utility to brewery processing, as it permits the multi-parameter optimization of the mashing process.

Low Lactic Acid-Producing Strain of Lachancea thermotolerans as a New Starter for Beer Production

Growing consumer interest in new beer flavors is contributing to the application of innovative materials and non-Saccharomyces yeast in brewing. The goal of this study was to test the impact of the low lactic acid-producing Lachancea thermotolerans MN477031 strain on the process of fermenting beer wort, with two different concentrations of bitter compounds, and on the quality of the beer produced. Qualify factors were broadly analyzed, including ethanol content, apparent degree of fermentation, sugars, organic acids, free amino nitrogen, glycerol, volatile compounds, ions and so on. It was proven that the L. thermotolerans MN477031 strain demonstrated a high capacity for rapid initiation of wort fermentation, and a tolerance to hop-derived compounds. As a result, the alcohol content in beer from this method of production was approximately 20% lower, while the content of the real extract was significantly higher in comparison to commercial Safbrew T-58. This strain stands out from many strains of L. thermotolerans due to the low lactic acid production and only marginal influence on pH decrease compared to Saccharomyces cerevisiae. Therefore, the potential of MN477031 in the production of different types of beer (not only sour) is very high. The composition of volatile compounds in L. thermotolerans beer differs—not only in terms of the use of the strain, but also in hop variety.

Total, Neutral, and Polar Lipids of Brewing Ingredients, By-Products and Beer: Evaluation of Antithrombotic Activities

The in vitro antithrombotic properties of polar lipid constituents of malted grain (MG), pelleted hops (PH), brewer’s spent grain (BSG), spent hops (SH), wort, and bottled beer from the same production line were assessed in human platelets. The total lipids (TL) were extracted according to the Bligh and Dyer method and further separated into the total neutral lipids (TNL) and total polar lipids (TPL) extracts by counter-current distribution. The TL, TNL, and TPL extracts of all samples were assessed for their ability to inhibit platelet-activating factor (PAF) and thrombin-induced human platelet aggregation. The raw materials, by-products, wort, and beer lipid extracts all exhibited antithrombotic properties against PAF and thrombin. However, the beer TPL exhibited the lowest IC₅₀ values against PAF-induced (7.8 ± 3.9 µg) and thrombin-induced (4.3 ± 3.0 µg) platelet aggregation indicating that these polar lipids were the most antithrombotic. The lipid extracts tended to be more bioactive against the thrombin pathway. The fatty acid content of all the TPL extracts were assessed using GC-MS. The fatty acid composition of the most bioactive TPL extracts, the wort and the beer, shared similar fatty acid profiles. Indeed, it was noted that fermentation seems to play a role in increasing the antithrombotic properties of polar lipids against PAF and thrombin by moderately altering the polar lipid fatty acid composition. Furthermore, the use of brewing by-products as a source of functional cardioprotective lipids warrants further investigation and valorisation.

Kinetic Models for the Role of Protein Thiols during Oxidation in Beer

Thiol-containing proteins have been suggested to have antioxidative properties in beer. A kinetic model has been setup for the reactivity of thiols during early stages of oxidative degradation of beer. Kinetic analysis based on the proposed reaction mechanism allowed evaluation of the relative reactivity of beer components, such as bitter acids from hops and polyphenols. The rate constants for the reaction of 1-hydroxyethyl radicals, which are generated during radical mediated oxidation of ethanol in beer, with hop bitter acids and thiols were very similar, and the concentration of these compounds in beer is therefore essential for the relative reactivity. For a standard pilsner beer with 35 international bitter units with typical concentrations of thiols and hop bitter acids, thiols were found to react with ca. 9% of 1-hydroxyethyl radicals, while bitter acids from hops accounted for ca. 88% of the reaction with 1-hydroxyethyl radicals. Polyphenols were not found to account for any major part of the reaction with 1-hydroxyethyl radicals due to low reaction rates and low concentrations in pilsner beer compared to the other components. The kinetic model suggests that the concentration of thiols has to be increased in order to contribute with any significant antioxidative protection and that the fate of thiols during oxidation must be considered since some thiol oxidation products may induce further damage.