Acellular carotid scaffold and evaluation the biological and biomechanical properties for tissue engineering

Introduction

The issues associated with the limitation of appropriate autologous vessels for vascular reconstruction via bypass surgery highlight the need for new alternative strategies based on tissue engineering. The present study aimed to prepare decellularized scaffolds from ovine carotid using chemical decellularization method.

Methods

Ovine carotid were decellularized with Triton X-100 and tri-n-butyl phosphate (TnBP) at 37 °C. Histological analysis, biochemical tests, biomechanical assay and biocompatibility assay were used to investigate the efficacy of decellularization.

Results

Decellularization method could successfully decellularize ovine carotid without leaving any cell remnants. Scaffolds showed minimal destruction of the three-dimensional structure and extracellular matrix, as well as adequate mechanical resistance and biocompatibility for cell growth and proliferation.

Conclusion

Prepared acellular scaffold exhibited the necessary characteristics for clinical applications.

Tubular TPU/SF nanofibers covered with chitosan-based hydrogels as small-diameter vascular grafts with enhanced mechanical properties

Native grafts such as internal mammary artery and saphenous vein are the main choice for coronary artery bypass graft. However, due to the limitations associated with their availability and rapid failure caused by hyperplasia, small diameter tissue-engineered vascular grafts (TEVGs) with sufficient post-implantation patency are urgently demanded as artificial alternatives. In our previous work, we innovatively fabricated a bilayer vascular graft providing appropriate structural and biological properties using electrospinning and freeze-drying methods. It was proved that the mechanical properties of the proposed graft enhanced in comparison with using either of methods individually. Here, we adopted the same methods and incorporated an anticoagulant internal layer (inner diameter 4 mm), comprised of co-electrospun fibers of silk fibroin (SF) and heparinized thermoplastic polyurethane (TPU), and an external highly porous hydrogel fabricated by freeze-drying method. The electrospun layer exhibited strong mechanical properties including superior elastic modulus (4.92 ± 0.11 MPa), suture retention force (6.73 ± 0.83 N), elongation at break (196 ± 4%), and comparable burst pressure (1140 ± 12 mmHg) while the external hydrogel provided SMCs viability. The heparin was released in a sustain manner over 40 days, and the cytocompatibility and blood compatibility of scaffold were approved using MTT assay and platelet adhesion test. Thus, the proposed graft has a potential to be used as an artificial blood vessel scaffold for later in-vivo transplantation.

Remodeling of Structurally Reinforced (TPU+PCL/PCL)-Hep Electro-spun Small Diameter Bilayer Vascular Grafts Interposed in Rat Ab-dominal Aorta

As the thermoplastic polyurethane (TPU) elastomer possesses good biocompatibility and mechanical properties similar to native vascular tissues as well, it is intended to co-electrospin with poly(ε-caprolactone) (PCL) onto the outer...

Sonication-Assisted Method for Decellularization of Human Umbilical Artery for Small-Caliber Vascular Tissue Engineering

Decellularized vascular grafts are useful for the construction of biological small-diameter tissue-engineered vascular grafts (≤6 mm). Traditional chemical decellularization requires a long treatment time, which may damage the structure and alter the mechanical properties. Decellularization using sonication is expected to solve this problem. The aim of this study was to develop an effective decellularization method using ultrasound followed by washing. Different power values of sonication at 40 kHz were tested for 2, 4, and 8 h followed by a washing procedure. The efficacy of sonication of decellularized human umbilical artery (sDHUA) was evaluated via DNA content, histological staining, mechanical properties, and biocompatibility. The sDHUAs were further implanted into rats for up to 90 days and magnetic resonance angiography (MRA) was performed for the implanted grafts. The results demonstrated that treatment of human umbilical artery (HUA) by sonication at ultrasonic power of 204 W for 4 h followed by washing for 24 h in 2% SDS buffer could eliminate more than 90% of cells and retain similar mechanical properties of the HUA. Recellularization was assessed by scanning electron microscopy (SEM), which indicated that sDHUA provided niches for human umbilical vein endothelial cells (HUVECs) to reside, indicating in vitro cytocompatibility. Further implantation tests also indicated the fitness of the sonication-treated HUA as a scaffold for small-caliber tissue engineering vascular grafts.

Application of tissue-engineered interventions for coronary artery bypass grafts

Coronary artery bypass graft is one of the extensively conducted procedures to release occlusion in the coronary vessel. Various biological grafts are used for this purpose, superiorly, saphenous vein graft, if unavailable, other vessels in the body, with likewise characteristics are exploited for the purpose. The choice of graft is yet under discovery that could impeccably meet all the requirements. Variation in perioperative and postoperative results have given uneven clinical inferences of these conduits. Alternatively, tissue-engineering is also being applied in this area for clinical improvements. This review underlines some of the commonly used grafts for coronary artery bypass graft and advancements in tissue engineering for this purpose.

Amnion-derived mesenchymal stem cells improve viability of endothelial cells exposed to shear stress in ePTFE grafts

PURPOSE:

Blood vessel reconstruction is an increasing need of patients suffering from cardiovascular diseases. For the development of microvascular prostheses, efficient endothelialization is mandatory to prevent graft occlusion. Here, we assessed the impact of amnion-derived mesenchymal stem/stromal cells (hAMSC), known for their important angiogenic potential, on the integrity and stability of endothelial cells exposed to shear stress in vascular grafts.

METHODS:

Human placental endothelial cells (hPEC) were cultured at the inner surface of an expanded polytetrafluoroethylene (ePTFE) graft positioned within a bioreactor and exposed to a minimal shear stress of 0.015 dyne/cm² or a physiological shear stress of 0.92 dyne/cm². hAMSC attached to the outer graft surface were able to interact with human placental endothelial cells by paracrine factors.

RESULTS:

Microscopical analysis and evaluation of glucose/lactate metabolism evidenced successful cell seeding of the graft: hPEC formed a stable monolayer, hAMSC showed a continuous growth during 72 h incubation. hAMSC improved the viability of hPEC exposed to 0.015 dyne/cm² as shown by a decreased lactate dehydrogenase release of 13% after 72 h compared to hPEC single culture. The viability-enhancing effect of hAMSC on hPEC was further improved by 13% under physiological shear stress. Angiogenesis array analysis revealed that hPEC exposed to physiological shear stress and hAMSC co-culture reduced the secretion of angiogenin, GRO, MCP-1, and TIMP-2.

CONCLUSION:

hAMSC exerted best survival-enhancing effects on hPEC under exposure to physiological shear stress and modulated endothelial function by paracrine factors. Our data support further studies on the development of grafts functionalized with hAMSC-derived secretomes to enable fast clinical application.

3D bioprinting of skin tissue: From pre-processing to final product evaluation

Bioprinted skin tissue has the potential for aiding drug screening, formulation development, clinical transplantation, chemical and cosmetic testing, as well as basic research. Limitations of conventional skin tissue engineering approaches have driven the development of biomimetic skin equivalent via 3D bioprinting. A key hope for bioprinting skin is the improved tissue authenticity over conventional skin equivalent construction, enabling the precise localization of multiple cell types and appendages within a construct. The printing of skin faces challenges broadly associated with general 3D bioprinting, including the selection of cell types and biomaterials, and additionally requires in vitro culture formats that allow for growth at an air-liquid interface. This paper provides a thorough review of current 3D bioprinting technologies used to engineer human skin constructs and presents the overall pipelines of designing a biomimetic artificial skin via 3D bioprinting from the design phase (i.e. pre-processing phase) through the tissue maturation phase (i.e. post-processing) and into final product evaluation for drug screening, development, and drug delivery applications.

Preparation and evaluation of decellularized porcine carotid arteries cross-linked by genipin: the preliminary results

Decellularized arteries have been considered as promising scaffolds for small-diameter vascular substitutes. However, weakened mechanical properties, immunological rejection and rapid degradation after transplantation still exist after decellularization. Previous studies indicated that genipin cross-linking can solve these problems. Therefore, genipin was selected as the cross-linking agent for the pre-treatment of decellularized arteries in our study. Histological analysis, scanning electron microscopy, mechanical properties analysis and subcutaneous embedding experiment were adopted to investigate the efficiency of decellularization and the effect of genipin cross-linking on improving mechanical, structural and biological properties of decellularized arteries. Decellularization protocols based on three trypsin concentrations were used to prepare decellularized arteries, after decellularization, arteries were cross-linked with genipin. Results showed that 0.5% trypsin was the most efficient concentration to remove cellular components and preserve ECM. However, mechanical properties of 0.5% trypsin decellularized arteries weakened significantly, while genipin cross-linking improved mechanical properties of decellularized arteries to the same level as fresh arteries. After 4 weeks subcutaneous embedding, cross-linked arteries caused the mildest inflammatory response. In conclusion, genipin could be employed as an ideal cross-linking agent to strengthen mechanical properties, enhance the resistance to degradation and reduce the antigenicity of decellularized arteries for small-diameter blood vessel tissue engineering applications.

Cells and stimuli in small-caliber blood vessel tissue engineering

The absence of successful solutions in treatments of small-caliber vessel diseases led to the Vascular Tissue Engineering approach to develop functional nonimmunogenic tissue engineered blood vessels. In this context, the choice of cells to be seeded and the microenvironment conditioning are pivotal. Biochemical and biomechanical stimuli seem to activate physiological regulatory pathways that induce the production of molecules and proteins stimulating stem cell differentiation toward vascular lineage and reproducing natural cross-talks among vascular cells to improve the maturation of tissue engineered blood vessels. Thus, this review focuses on (1) available cell sources, and (2) biochemical and biomechanical stimuli, with the final aim to obtain the long-term stability of the endothelium and mechanical properties suitable for withstanding physiological load.

Biomaterials for integration with 3-D bioprinting

Bioprinting has emerged in recent years as an attractive method for creating 3-D tissues and organs in the laboratory, and therefore is a promising technology in a number of regenerative medicine applications. It has the potential to (i) create fully functional replacements for damaged tissues in patients, and (ii) rapidly fabricate small-sized human-based tissue models, or organoids, for diagnostics, pathology modeling, and drug development. A number of bioprinting modalities have been explored, including cellular inkjet printing, extrusion-based technologies, soft lithography, and laser-induced forward transfer. Despite the innovation of each of these technologies, successful implementation of bioprinting relies heavily on integration with compatible biomaterials that are responsible for supporting the cellular components during and after biofabrication, and that are compatible with the bioprinting device requirements. In this review, we will evaluate a variety of biomaterials, such as curable synthetic polymers, synthetic gels, and naturally derived hydrogels. Specifically we will describe how they are integrated with the bioprinting technologies above to generate bioprinted constructs with practical application in medicine.

Tissue-engineered lymphatic graft for the treatment of lymphedema

BACKGROUND

Lymphedema is a chronic debilitating condition and curative treatment is yet to be found. Tissue engineering approach, which combines cellular components, scaffold, and molecular signals hold great potential in the treatment of secondary lymphedema with the advent of lymphatic graft to reconstruct damaged collecting lymphatic vessel. This review highlights the ideal characteristics of lymphatic graft, the limitation and challenges faced, and the approaches in developing tissue-engineered lymphatic graft.

METHODS

Literature on tissue engineering of lymphatic system and lymphatic tissue biology was reviewed.

RESULTS

The prime challenge in the design and manufacturing of this graft is producing endothelialized conduit with intraluminal valves. Suitable scaffold material is needed to ensure stability and functionality of the construct. Endothelialization of the construct can be enhanced via biofunctionalization and nanotopography, which mimics extracellular matrix. Nanocomposite polymers with improved performance over existing biomaterials are likely to benefit the development of lymphatic graft.

CONCLUSIONS

With the in-depth understanding of tissue engineering, nanotechnology, and improved knowledge on the biology of lymphatic regeneration, the aspiration to develop successful lymphatic graft is well achievable.

Acellular blood vessels combined human hair follicle mesenchymal stem cells for engineering of functional arterial grafts

Tissue-engineered vessels offer options for autologous vascular grafts in cardiovascular repair and regeneration. The experiments aimed to construct functional arterial grafts by combining human hair follicle mesenchymal stem cells (HF-MSCs) with acellular umbilical arteries. We isolated mesenchymal stem cells from human hair follicles. Under appropriate culture conditions, these cells displayed CD44, CD90 and CD105, and exhibited the potential for differentiation to adipocytes, osteoblasts and chondrocytes. Very promisingly, HF-MSCs expressed the vascular smooth muscle specific markers in the presence of transforming growth factor-β. We created acellular arterial scaffolds by digesting human umbilical arteries with trypsin and sodium dodecyl sulfate. These acellular arterial scaffolds retained major components of the extracellular matrix. The mechanical properties of these acellular arterial scaffolds were very similar to those of native blood vessels. We then seeded HF-MSCs into acellular arterial scaffolds and found that they still expressed vascular smooth muscle specific markers. The arterial grafts derived from HF-MSCs demonstrated vasoreactivity in response to humoral constrictors. We constructed arterial grafts that are very close to native blood vessels in their structures and physiological functions. These properties suggest that these arterial grafts could be used as small diameter arterial grafts for cardiovascular repair and regeneration.

Vascular tissue engineering: from in vitro to in situ

Blood vessels transport blood to deliver oxygen and nutrients. Vascular diseases such as atherosclerosis may result in obstruction of blood vessels and tissue ischemia. These conditions require blood vessel replacement to restore blood flow at the macrocirculatory level, and angiogenesis is critical for tissue regeneration and remodeling at the microcirculatory level. Vascular tissue engineering has focused on addressing these two major challenges. We provide a systematic review on various approaches for vascular graft tissue engineering. To create blood vessel substitutes, bioengineers and clinicians have explored technologies in cell engineering, materials science, stem cell biology, and medicine. The scaffolds for vascular grafts can be made from native matrix, synthetic polymers, or other biological materials. Besides endothelial cells, smooth muscle cells, and fibroblasts, expandable cells types such as adult stem cells, pluripotent stem cells, and reprogrammed cells have also been used for vascular tissue engineering. Cell-seeded functional tissue-engineered vascular grafts can be constructed in bioreactors in vitro. Alternatively, an autologous vascular graft can be generated in vivo by harvesting the capsule layer formed around a rod implanted in soft tissues. To overcome the scalability issue and make the grafts available off-the-shelf, nonthrombogenic vascular grafts have been engineered that rely on the host cells to regenerate blood vessels in situ. The rapid progress in the field of vascular tissue engineering has led to exciting preclinical and clinical trials. The advancement of micro-/nanotechnology and stem cell engineering, together with in-depth understanding of vascular regeneration mechanisms, will enable the development of new strategies for innovative therapies.

An anti-CD34 antibody-functionalized clinical-grade POSS-PCU nanocomposite polymer for cardiovascular stent coating applications: a preliminary assessment of endothelial progenitor cell capture and hemocompatibility

In situ endothelialization of cardiovascular implants has emerged in recent years as an attractive means of targeting the persistent problems of thrombosis and intimal hyperplasia. This study aimed to investigate the efficacy of immobilizing anti-CD34 antibodies onto a POSS-PCU nanocomposite polymer surface to sequester endothelial progenitor cells (EPCs) from human blood, and to characterize the surface properties and hemocompatibility of this surface. Amine-functionalized fumed silica was used to covalently conjugate anti-CD34 to the polymer surface. Water contact angle, fluorescence microscopy, and scanning electron microscopy were used for surface characterization. Peripheral blood mononuclear cells (PBMCs) were seeded on modified and pristine POSS-PCU polymer films. After 7 days, adhered cells were immunostained for the expression of EPC and endothelial cell markers, and assessed for the formation of EPC colonies. Hemocompatibility was assessed by thromboelastography, and platelet activation and adhesion assays. The number of EPC colonies formed on anti-CD34-coated POSS-PCU surfaces was not significantly higher than that of POSS-PCU (5.0±1.0 vs. 1.7±0.6, p>0.05). However, antibody conjugation significantly improved hemocompatibility, as seen from the prolonged reaction and clotting times, decreased angle and maximum amplitude (p<0.05), as well as decreased platelet adhesion (76.8±7.8 vs. 8.4±0.7, p<0.05) and activation. Here, we demonstrate that POSS-PCU surface immobilized anti-CD34 antibodies selectively captured CD34+ cells from peripheral blood, although only a minority of these were EPCs. Nevertheless, antibody conjugation significantly improves the hemocompatibility of POSS-PCU, and should therefore continue to be explored in combination with other strategies to improve the specificity of EPC capture to promote in situ endothelialization.

Small-diameter vascular tissue engineering

Vascular occlusion remains the leading cause of death in Western countries, despite advances made in balloon angioplasty and conventional surgical intervention. Vascular surgery, such as CABG surgery, arteriovenous shunts, and the treatment of congenital anomalies of the coronary artery and pulmonary tracts, requires biologically responsive vascular substitutes. Autografts, particularly saphenous vein and internal mammary artery, are the gold-standard grafts used to treat vascular occlusions. Prosthetic grafts have been developed as alternatives to autografts, but their low patency owing to short-term and intermediate-term thrombosis still limits their clinical application. Advances in vascular tissue engineering technology-such as self-assembling cell sheets, as well as scaffold-guided and decellularized-matrix approaches-promise to produce responsive, living conduits with properties similar to those of native tissue. Over the past decade, vascular tissue engineering has become one of the fastest-growing areas of research, and is now showing some success in the clinic.

Biofunctionalized quantum dots for live monitoring of stem cells: applications in regenerative medicine

AIM

This study aimed to live monitor the degree of endothelial progenitor cell (EPC) integration onto tissue-engineering scaffolds by conjugating relevant antibodies to quantum dots (QDs).

MATERIALS & METHODS

Biocompatible mercaptosuccinic acid-coated QDs were functionalized with two different antibodies to EPC (CD133 with QDs of 640 nm wavelength [λ] and later-stage mature EPCs; and von Willebrand factor with QDs of λ595 and λ555 nm) using conventional carbomide and N-hydroxysuccinimide chemistry. Biofunctionalization was characterized with Fourier-transform infrared spectroscopy. Cell viability assays and gross morphology observations confirmed cytocompatibility and normal patterns of celluar growth. The antigens corresponding to each state of cell maturation were determined using a single excitation at λ488 nm.

RESULTS

The optimal concentrations of antibody-QD conjugates were biocompatible, hemocompatible and determined the state of EPC transformation to endothelial cells.

CONCLUSION

Antibody-functionalized QDs suggest new applications in tissue engineering of polymer-based implants where cell integration can potentially be monitored without requiring the sacrifice of implants.

A prototype tissue engineered blood vessel using amniotic membrane as scaffold

In this study, we used amniotic membrane (AM), a natural extracellular matrix, as a scaffold for the fabrication of tissue engineered blood vessels (TEBVs). The inner surface of the denuded glutaraldehyde cross-linked AM tube was endothelialized with porcine vascular endothelial cells (ECs) and subjected to a physiological (12 dynecm(-2)) shear stress (SS) for 2 and 4 days. The results showed that after applying SS, an intact EC monolayer was maintained in the lumen surface of the TEBV. The ECs were aligned with their long axis parallel to the blood flow. The immunofluorescent microscopy showed that the intercellular junctional proteins, PECAM-1 and VE-cadherin, were surrounding the EC periphery and were better developed and more abundant in SS-treated TEBVs than the static controls. The Western blot indicated that the expressions of PECAM-1 and VE-cadherin were increased by 72 ± 9% and 67 ± 7%, respectively, after shear stress treatment. The distribution pattern of integrin β1 was mainly at the interface of ECs and AM in static TEBVs but it was extended to the cell-cell junctions after SS treatment. The SS promoted the expression of integrin α(v)β(3) without altering its distribution in TEBV. The results suggest that glutaraldehyde cross-linked AM tube can potentially be used as a scaffold biomaterial for TEBV fabrication. Most importantly, the use of an AM tube shortened the TEBV fabrication.

Towards the therapeutic use of vascular smooth muscle progenitor cells

Recent advances in the development of alternative proangiogenic and revascularization processes, including recombinant protein delivery, gene therapy, and cell therapy, hold the promise of greater efficacy in the management of cardiovascular disease in the coming years. In particular, vascular progenitor cell-based strategies have emerged as an efficient treatment approach to promote vessel formation and repair and to improve tissue perfusion. During the past decade, considerable progress has been achieved in understanding therapeutic properties of endothelial progenitor cells, while the therapeutic potential of vascular smooth muscle progenitor cells (SMPC) has only recently been explored; the number of the circulating SMPC being correlated with cardiovascular health. Several endogenous SMPC populations with varying phenotypes have been identified and characterized in the peripheral blood, bone marrow, and vascular wall. While the phenotypic entity of vascular SMPC is not fully defined and remains an evolving area of research, SMPC are increasingly recognized to play a special role in cardiovascular biology. In this review, we describe the current approaches used to define vascular SMPC. We further summarize the data on phenotype and functional properties of SMPC from various sources in adults. Finally, we discuss the role of SMPC in cardiovascular disease, including the contribution of SMPC to intimal proliferation, angiogenesis, and atherosclerotic plaque instability as well as the benefits resulting from the therapeutic use of SMPC.

The use of antithrombotic therapies in reducing synthetic small-diameter vascular graft thrombosis

BACKGROUND

Thrombosis of synthetic small-diameter bypass grafts remains a major problem. The aim of this article is to review the antithrombotic strategies that have been used in an attempt to reduce graft thrombogenicity.

METHODS

A PubMed/MEDLINE search was performed using the search terms "vascular graft thrombosis," "small-diameter graft thrombosis," "synthetic graft thrombosis" combined with "antithrombotic," "antiplatelet," "anticoagulant," "Dacron," "PTFE," and "polyurethane."

RESULTS

The majority of studies on antithrombotic therapies have used either in vitro models or in vivo animal experiments. Many of the therapies used in these settings do show antithrombotic efficacy against synthetic graft materials. There is however, a distinct lack of human in vivo studies to further delineate the performance and limitations of therapies displaying good antithrombotic characteristics.

CONCLUSION

Very few antithrombotic therapies have translated into clinical use. More human in vivo studies are required to assess the efficacy and safety of such therapies.

Hypoxic culture and insulin yield improvements to fibrin-based engineered tissue

We examined the effect of insulin supplementation and hypoxic culture (2% vs. 20% oxygen tension) on collagen deposition and mechanical properties of fibrin-based tubular tissue constructs seeded with neonatal human dermal fibroblasts. The results presented here demonstrate that constructs cultured under hypoxic conditions with insulin supplementation increased in collagen density by approximately five-fold and both the ultimate tensile strength (UTS) and modulus by more than three-fold compared with normoxic (20% oxygen tension), noninsulin supplemented controls. In addition, collagen deposited on a per-cell basis increased by approximately four-fold. Interaction was demonstrated for hypoxia and insulin in combination in terms of UTS and collagen production on a per-cell basis. This interaction resulted from two distinct processes involved in collagen fibril formation. Western blot analysis showed that insulin supplementation alone increased Akt phosphorylation and the combined treatment increased collagen prolyl-4-hydroxylase. These molecules are distinct regulators of collagen deposition, having an impact at both the transcriptional and posttranslational modification stages of collagen fibril formation that, in turn, increase collagen density in the tissue constructs. These findings highlight the potential of utilizing insulin supplementation and hypoxic culture in combination to increase the mechanical strength and stiffness of fibrin-based engineered tissues.

Fetal development, mechanobiology and optimal control processes can improve vascular tissue regeneration in bioreactors: an integrative review

Vascular tissue engineering aims to regenerate blood vessels to replace diseased arteries for cardiovascular patients. With the scaffold-based approach, cells are seeded on a scaffold showing specific properties and are expected to proliferate and self-organize into a functional vascular tissue. Bioreactors can significantly contribute to this objective by providing a suitable environment for the maturation of the tissue engineered blood vessel. It is recognized from the mechanotransduction principles that mechanical stimuli can influence the protein synthesis of the extra-cellular matrix thus leading to maturation and organization of the tissues. Up to date, no bioreactor is especially conceived to take advantage of the mechanobiology and optimize the construct maturation through an advanced control strategy. In this review, experimental strategies in the field of vascular tissue engineering are detailed, and a new approach inspired by fetal development, mechanobiology and optimal control paradigms is proposed. In this new approach, the culture conditions (i.e. flow, circumferential strain, pressure frequency, and others) are supposed to dynamically evolve to match the maturity of vascular constructs and maximize the efficiency of the regeneration process. Moreover, this approach allows the investigation of the mechanisms of growth, remodeling and mechanotransduction during the culture.

Exploring cell compatibility of a fibronectin-functionalized physically crosslinked poly(vinyl alcohol) hydrogel

Physically crosslinked poly(vinyl alcohol) (PVA) hydrogels prepared using a low-temperature thermally cycled process have tunable mechanical properties that fall within the range of soft tissues, including cardiovascular tissue. An approach to render it hemocompatible is by endothelization, but its hydrophilic nature is not conducive to cell adhesion and spreading. We investigated the functionalization reaction of this class of PVA hydrogel with fibronectin (FN) for adhesion and spreading of primary porcine radial artery cells and vascular endothelial cells. These are cells relevant to small-diameter vascular graft development. FN functionalization was achieved using a multistep reaction, but the activation step involving carbonyl diimidazole normally required for chemically crosslinked PVA was found to be unnecessary. The reaction resulted in an increase in the elastic modulus of the PVA hydrogel but is still well within the range of cardiovascular tissue. Confocal microscopy confirmed the adhesion and spreading of both cell types on the PVA-FN surfaces, whereas cells failed to adhere to the PVA control. This is a first step toward an alternative for the realization of a synthetic replacement small-diameter vascular graft.

Tubular silk scaffolds for small diameter vascular grafts

Vascular surgeries such as coronary artery bypass require small diameter vascular grafts with properties that are not available at this time. Approaches using synthetic biomaterials have been not completely successful in producing non-thrombogenic grafts with inner diameters less than 6 mm, and there is a need for new biomaterials and graft designs. We propose silk fibroin as a microvascular graft material and describe tubular silk scaffolds that demonstrate improved properties over existing vascular graft materials. Silk tubes produced using an aqueous gel spinning technique were first assessed in vitro in terms of thrombogenicity (thrombin and fibrinogen adsorption, platelet adhesion) and vascular cell responses (endothelial and smooth muscle cell attachment and proliferation) in comparison with polytetrafluoroethylene (PTFE), a synthetic material most frequently used for vascular grafts. Silk tubes were then implanted into the abdominal aortas of Sprague-Dawley rats. At time points of 2 weeks and 4 weeks post implantation, tissue outcomes were assessed through gross observation (acute thrombosis, patency) and histological staining (H&E, Factor VIII, smooth muscle actin). Over the 4-week time period, we observed graft patency and endothelial cell lining of the lumen surfaces. These results demonstrate the feasibility of using silk fibroin as a vascular graft material and some advantages of silk tubes over the currently used synthetic grafts.

Conjugation of fibronectin onto three-dimensional porous scaffolds for vascular tissue engineering applications

Tissue engineering scaffolds provide the three-dimensional (3-D) geometry and mechanical framework required for regulating cell behavior and facilitating tissue maturation. Unfortunately, most synthetic scaffolds lack the biological recognition motifs required for seeded cell interaction. In order to impart this recognition, synthetic scaffolds should possess appropriate biological functionality. Here, for the first time, we present a comprehensive study of fibronectin (FN) conjugation onto highly porous 3-D poly(carbonate) urethane scaffolds through grafted poly(acrylic acid) spacers on the urethane backbone. Scanning electron microscopy was used to ensure that the porous structures of the scaffolds were preserved throughout the multiple conjugation steps, and Fourier transform infrared spectroscopy was used to monitor the reaction progress. Toluidine blue staining revealed that increasing acrylic acid concentration and grafting time increased the number of poly(acrylic acid) groups incorporated. High resolution X-ray photoelectron spectroscopy studies of the scaffolds demonstrated an increase in nitrogen and sulfur due to FN conjugation. Immunofluorescence microscopy studies showed an even distribution of conjugated FN on the 3-D scaffolds. Cell culture studies using human coronary artery smooth muscle cells demonstrated that FN-conjugated scaffolds had improved cell attachment and infiltration depth compared with scaffolds without FN conjugation and with those scaffolds on which FN was merely adsorbed.

Enhancing Endothelial Cell Retention on ePTFE Constructs by siRNA-Mediated SHP-1 Gene Silencing

Polymeric vascular grafts hold great promise for vascular reconstruction, but the lack of endothelial cells renders these grafts susceptible to intimal hyperplasia and restenosis, precluding widespread clinical applications. The purpose of this study is to establish a stable endothelium on expanded polytetrafluoroethylene (ePTFE) membrane by small interfering RNA (siRNA)-induced suppression of the cell adhesion inhibitor SH2 domain-containing protein tyrosine phosphatase-1 (SHP-1). Human umbilical vein endothelial cells (HUVECs) were treated with scrambled siRNA as a control or SHP-1 specific siRNA. Treated cells were seeded onto fibronectin-coated ePTFE scaffolds and exposed to a physiological range of pulsatile fluid shear stresses for 1 h in a variable-width parallel plate flow chamber. Retention of cells was measured and compared between various shear stress levels and between groups treated with scrambled siRNA and SHP-1 specific siRNA. HUVECs seeded on ePTFE membrane exhibited shear stress-dependent retention. Exposure to physiological shear stress (10 dyn/cm2) induced a reduction in the retention of scrambled siRNA treated cells from 100% to 85% at 1 h. Increased shear stress (20 dyn/cm2) further reduced retention of scrambled siRNA treated cells to 55% at 1 h. SHP-1 knockdown mediated by siRNA enhanced endothelial cell retention from approximately 60% to 85% after 1 h of exposure to average shear stresses in the range of 15–30 dyn/cm2. This study demonstrates that siRNA-mediated gene silencing may be an effective strategy for improving the retention of endothelial cells within vascular grafts.

Spatial control of gene expression within a scaffold by localized inducer release

Gene expression can be controlled in genetically modified cells by employing an inducer/promoter system where presence of the inducer molecule regulates the timing and level of gene expression. By applying the principles of controlled release, it should be possible to control gene expression on a biomaterial surface by the presence or absence of inducer release from the underlying material matrix, thus avoiding alternative techniques that rely upon uptake of relatively labile DNA from material surfaces. To evaluate this concept, a modified ecdysone-responsive gene expression system was transfected into B16 murine cells and the ability of an inducer ligand, which was released from elastomeric poly(ester urethane) urea (PEUU), to initiate gene expression was studied. The synthetic inducer ligand was first loaded into PEUU to demonstrate extended release of the bioactive molecule at various loading densities over a one year period in vitro. Patterning films of PEUU variably-loaded with inducer resulted in spatially controlled cell expression of the gene product (green fluorescent protein, GFP). In porous scaffolds made from PEUU by salt leaching, where the central region was exclusively loaded with inducer, cells expressed GFP predominately in the loaded central regions whereas expression was minimal in outer regions where ligand was omitted. This scaffold system may ultimately provide a means to precisely control progenitor cell commitment in a spatially-defined manner in vivo for soft tissue repair and regeneration.

Linear shear conditioning improves vascular graft retention of adipose-derived stem cells by upregulation of the alpha5beta1 integrin

Use of adult adipose-derived stem cells (ASCs) as endothelial cell substitutes in vascular tissue engineering is attractive because of their availability. However, when seeded onto decellularized vascular scaffolding and exposed to physiological fluid shear force, ASCs are physically separated from the graft lumen. Herein we have investigated methods of increasing initial ASC attachment using luminal precoats and a novel protocol for the gradual introduction of shear stress to optimize ASC retention. Fibronectin coating of the graft lumen increased ASC attachment by nearly sixfold compared with negative controls. Gradual introduction of near physiological fluid shear stress using a novel bioreactor whereby flow rate was increased every second at a rate of 1.5 dynes/cm(2) per day resulted in complete luminal coverage compared with near complete cell loss following conventional daily abrupt increases. An upregulation of the alpha(5)beta(1) integrin was evinced following exposure to shear stress, which accounts for the observed increase in ASC retention on the graft lumen. These results indicated a novel method for seeding, conditioning, and retaining of adult stem cells on a decellularized vein scaffold within a high-shear stress microenvironment.

Smooth muscle alpha-actin and calponin expression and extracellular matrix production of human coronary artery smooth muscle cells in 3D scaffolds

For a tissue-engineered coronary artery substitute to be a viable clinical option in the treatment of vascular diseases, it is necessary to use tissue-specific human cells. Coronary artery smooth muscle cells are the main resident cells in the tunica media of arteries. In this work, we examined the behavior and differentiation state of human coronary artery smooth muscle cells (HCASMCs) when cultured on 3D polyurethane scaffolds to fabricate hybrid vascular tissues. As the mechanical strength of the scaffold is an important element in engineered hybrid vascular substitutes, porous 3D polyurethane scaffolds fabricated using paraffin spheres and ammonium chloride particles were tested for their mechanical properties both in tension and in compression. The use of ammonium chloride particles as porogen generated scaffolds with superior mechanical properties, which are suitable for vascular tissue engineering. When seeded on uncoated, fibronectin-coated, and Matrigel-coated scaffolds, HCASMCs were well spread and started producing collagen as judged by histochemical analysis but appeared to lack elastin production. Fibronectin coating appeared to promote the infiltration of HCASMCs into the scaffold better than Matrigel coating but did not appear to affect the expression of collagen and elastin. Western blot analyses after successful cell recovery from the scaffolds indicated that HCASMCs, after culturing for 4 and 7 days, expressed similar amounts of smooth muscle alpha-actin and calponin regardless of extracellular matrix coating. Taken together, our data showed that the behavior and differentiation phenotype of HCASMCs can be analyzed after culture in 3D polyurethane scaffolds to establish appropriate conditions that will favor the fabrication of hybrid-engineered vascular substitutes.

The use of three-dimensional nanostructures to instruct cells to produce extracellular matrix for regenerative medicine strategies

Synthetic polymers or naturally-derived extracellular matrix (ECM) proteins have been used to create tissue engineering scaffolds; however, the need for surface modification in order to achieve polymer biocompatibility and the lack of biomechanical strength of constructs built using proteins alone remain major limitations. To overcome these obstacles, we developed novel hybrid constructs composed of both strong biosynthetic materials and natural human ECM proteins. Taking advantage of the ability of cells to produce their own ECM, human foreskin fibroblasts were grown on silicon-based nanostructures exhibiting various surface topographies that significantly enhanced ECM protein production. After 4 weeks, cell-derived sheets were harvested and histology, immunochemistry, biochemistry and multiphoton imaging revealed the presence of collagens, tropoelastin, fibronectin and glycosaminoglycans. Following decellularization, purified sheet-derived ECM proteins were mixed with poly(epsilon-caprolactone) to create fibrous scaffolds using electrospinning. These hybrid scaffolds exhibited excellent biomechanical properties with fiber and pore sizes that allowed attachment and migration of adipose tissue-derived stem cells. Our study represents an innovative approach to generate strong, non-cytotoxic scaffolds that could have broad applications in tissue regeneration strategies.

Development of cardiovascular bypass grafts: endothelialization and applications of nanotechnology

There is a critical clinical need for small-diameter bypass grafts, with applications involved in the coronary artery and lower limb. Commercially available materials give rise to unfavorable responses when in contact with blood and subjected to low-flow hemodynamics and, thus, are nonideal as small-diameter bypass grafts. Optimizing the mechanical properties to match both the native artery and the graft surfaces has received keen attention. Endothelialization of bypass grafts is considered a protective mechanism where the biochemicals produced from endothelial cells exert a range of favorable responses, including antithrombotic, noninflammatory responses and inhibition of intimal hyperplasia. In situ endothelialization is most desirable. Nanotechnology approaches facilitate all aspects of endothelialization, including endothelial progenitor cell mobilization, migration, adhesion, proliferation and differentiation. 'Surface nanoarchitecturing mechanisms', which mimic the natural extracellular matrix to optimize endothelial progenitor cell interaction and controlled delivery of various factors in the form of nanoparticles, which can be combined with gene therapy, are of keen interest. This article discusses the development of bypass grafts, focusing on the optimization of the biological properties of mechanically suitable grafts.

Mechanical properties of completely autologous human tissue engineered blood vessels compared to human saphenous vein and mammary artery

We have previously reported the initial clinical feasibility with our small diameter tissue engineered blood vessel (TEBV). Here we present in vitro results of the mechanical properties of the TEBVs of the first 25 patients enrolled in an arterio-venous (A-V) shunt safety trial, and compare these properties with those of risk-matched human vein and artery. TEBV average burst pressures (3490+/-892 mmHg, n=230) were higher than native saphenous vein (SV) (1599+/-877 mmHg, n=7), and not significantly different from native internal mammary artery (IMA) (3196+/-1264 mmHg, n=16). Suture retention strength for the TEBVs (152+/-50 gmf) was also not significantly different than IMA (138+/-50 gmf). Compliance for the TEBVs prior to implantation (3.4+/-1.6%/100 mmHg) was lower than IMA (11.5+/-3.9%/100 mmHg). By 6 months post-implant, the TEBV compliance (8.8+/-4.2%/100 mmHg, n=5) had increased to values comparable to IMA, and showed no evidence of dilation or aneurysm formation. With clinical time points beyond 21 months as an A-V shunt without intervention, the mechanical tests and subsequent lot release criteria reported here would seem appropriate minimum standards for clinical use of tissue engineered vessels.