Coagulation activators and inhibitors in the neointima of polyester vascular grafts

Artificial heart valve reinforced with silk woven fabric and poly (ethylene glycol) diacrylate hydrogels composite

The present study describes the preparation of woven silk fabric (WSF) and poly(ethylene glycol) diacrylate (PEGDA) hydrogel composite reinforced artificial heart valve (SPAHV). Interestingly, the longitudinal and latitudinal elastic modulus of the SPAHV composite can achieve at 54.08 ± 3.29 MPa and 23.96 ± 2.18 MPa, respectively, while its volume/mass swelling ratio and water permeability was 1.9 %/2.8 % and 3 mL/(cm2∙min), respectively, revealing remarkable anisotropic mechanical properties, low water swelling property and water permeability. The in vitro & in vivo biocompatibility and anti-calcification ability of SPAHV were further examined using L929 mouse fibroblasts and Sprague Dawley (SD) male rat model under 8 weeks of subcutaneous implantation. The expression of pro-inflammatory cytokine TNF-α and anti-inflammatory cytokine IL-10 was determined by immunohistochemical staining, as well as the H&E staining and alizarin red staining were accessed. The results showed that the composites possess better biocompatibility, resistance to degradation and anti-calcification ability compared to the control group (p < 0.05). Thus, the SPAHV composite with robust mechanical properties and biocompatibility has potential application for artificial heart valves.

Primary Thromboprophylaxis with Heparins for Arteriovenous Fistula Failure in Pediatric Patients

Background

To reduce the incidence of early arteriovenous fistula failure (AVF) due to thrombosis in pediatric hemodialysis (HD) patients, a primary thromboprophylaxis (PTP) protocol was initiated at author's institution in June 2005. The goal of this study is to report author's experience with this protocol one year later.

Methods and Results

19 AVFs (14 patients, Historical group) and 8 AVFs (7 patients, PTP group) were created prior to and after initiation of PTP respectively. PTP consisted of unfractionated heparin (5–10 units/kg/hr) infusion postoperatively, followed by subcutaneous low molecular weigh heparin (LMWH) until AVF was matured. LMWH dosing was “Prophylactic” (0.5 mg/kg/d, anti-factor Xa levels: peak 0.25–0.5 and trough < 0.3 units/mL) and “Therapeutic” (1 mg/kg/d, anti-factor Xa level: peak 0.5-1 and trough < 0.5 units/mL) based on thrombosis predisposition. In Historical group, 12 AVFs did not receive thromboprophylaxis (No-treatment group), 5 received 81 mg aspirin/day (Aspirin group), and 2 received LMWH. In No-treatment group 10/12 AVFs failed: 9 thromboses and 1 stenosis. In Aspirin group 1/5 AVFs failed due to thrombosis. In PTP group 1/8 AVFs failed due to stenosis; the first 2 AVFs developed hematoma prompting a reduction in LMWH dose and monitoring trough anti-factor Xa levels, one AVF required thrombectomy after LMWH was transiently held. The incidence of thrombosis was less in PTP group (12.5%) when comparing to No-treatment group (83%) (p < 0.05).

Conclusion

PTP is a feasible option to prevent early thrombosis at AVF. Close clinical and laboratory monitoring including trough anti-factor Xa levels is required to adjust optimum anticoagulation. Larger studies are needed to clarify safety and efficacy of our PTP protocol.

Characterization of surface modified polyester fabric

Woven polyethylene terephthalate (PET) fabric has been used in the construction of vascular grafts and sewing ring of prosthetic heart valves. In an effort to improve haemocompatibility and tissue response to PET fabric, a fluoropolymer, polyvinylidine fluoride (PVDF), was coated on PET fabric by dip coating technique. The coating was found to be uniform and no significant changes occurred on physical properties such as water permeability and burst strength. Cell culture cytotoxicity studies showed that coated PET was non-cytotoxic to L929 fibroblast cell lines. In vitro studies revealed that coating improved haemocompatibility of PET fabric material. Coating reduced platelet consumption of PET fabric by 50%. Upon surface modification leukocyte consumption of PET was reduced by 24%. About 60% reduction in partial thromboplastin time (PTT) observed when PET was coated with PVDF. Results of endothelial cell proliferation studies showed that surface coating did not have any substantial impact on cell proliferation. Overall results indicate that coating has potential to improve haemocompatibility of PET fabric without affecting its mechanical performance.

Addressing thrombogenicity in vascular graft construction

Thrombosis is a major cause of poor patency in synthetic vascular grafts for small diameter vessel (< 6 mm) bypass. Arteries have a host of structural mechanisms by which they prevent triggering of platelet activation and the clotting cascade. Many of these are present in vascular endothelial cells. These mechanisms act together with perpetual feedback at different levels, providing a constantly fine-tuned non-thrombogenic environment. The arterial wall anatomy also serves to promote thrombosis as a healing mechanism when it has been severely injured. Surface modification of synthetic graft surfaces to attenuate the coagulation cascade has reduced thrombosis levels and improved patency in vitro and in animal models. Success in this endeavor is critically dependent on the methods used to modify the surface. Platelets adhere to positively charged surfaces due to their own negative charge. They also preferentially attach to hydrophobic surfaces. Therefore synthetic graft development is concerned with hydrophilic materials with negative surface charge. However, fibrinogen has both hydrophilic and hydrophobic binding sites-amphiphilic materials reduce its adhesion and subsequent platelet activation. The self-endothelializing synthetic graft is an attractive proposition as a confluent endothelial layer incorporates many of the anti-thrombogenic properties of arteries. Surface modification to promote this has shown good results in animal models. The difficulties experienced in achieving spontaneous endothelialisation in humans have lead to the investigation of pre-implantation in vitro endothelial cell seeding. These approaches ultimately aim to result in novel synthetic grafts which are anti-thrombogenic and hence suitable for coronary and distal infrainguinal bypass.

Thrombogenicity and Related Biological Properties of Heparin Bonded Collagen Coated Polyester and Human Umbilical Vein Prosthetic Vascular Grafts

BACKGROUND

Multiple factors contribute to the process of prosthetic graft failure. Some of them are specifically related to the biological behavior of the used materials. To pursue the ideal substitute for the autologous vein graft, many materials have been taken into consideration. Of these, polyester (Dacron) and human umbilical vein (HUV, Dardik) bypass grafts have gained much attention in vascular surgical practice over the years. This study compares the results of both in vivo and in vitro investigations on graft thrombogenicity and neo-intimal formation in collagen-coated heparin bonded Dacron and in HUV bypass grafts. It is an adjunct to our clinical comparison of graft materials in infrainguinal arterial reconstruction.

METHODS

In 12 adult Beagle dogs, a patch was sewn onto the abdominal aorta (Dacron, n = 6; HUV, n = 6). At defined interval times, thrombocyte aggregation was measured with nuclear imaging of 99mTechnetium labeled platelets. Post-mortem histological analysis of the interface between the native vessel wall and the patch was performed in all animals.

RESULTS

At 4 h (2.67, SD = 0.77) and after 2 weeks (2.21, SD = 0.28) after implantation, significantly higher thrombogenicity was measured in the HUV grafts compared to Dacron grafts (1.98, SD = 0.10 and 1.98, SD = 0.11, P = 0.02 and 0.025, respectively). At 4 weeks, no significant difference could be found (HUV, 2.26; SD = 0.29; Dacron, 2.11; SD = 0.16; P = 0.23). Measurement of 'neo-intimal' thickness after explantation of the patch at 28 days after the initial procedure showed a significant difference: in HUV grafts the mean thickness of the inner lining was 0.76 mm (SD = 0.50), compared to 0.16 mm (SD = 0.10) in the Dacron grafts (P = 0.013).

CONCLUSION

HUV grafts showed a higher thrombogenicity at 4 h and 2 weeks after insertion of the graft compared to Dacron grafts. At 4 weeks this difference is not present. After 28 days the inner ('neo-intimal') lining is significantly more pronounced in HUV grafts than in Dacron grafts.

Evaluation of urokinase-type plasminogen activator and its receptor in neointima of polyester vascular grafts

The aim of the study was to assess the expression of urokinase-type plasminogen activator (uPA) and its receptor (uPAR) in neointima of polyester vascular grafts. Anastomotic areas were examined at 1, 4 and 12 months after prosthesis implantation in dogs, as well as in human vascular grafts. Immunohistochemistry was performed for uPA and uPAR. Graft neointima in dogs was positively stained for uPA with increased intensity at 4 and 12 months, whereas uPAR expression appeared at 4 and its intensity was increased at 12 months. Intensive uPA and positive uPAR labeling was shown in human grafts. The results demonstrated that in the early period of the healing process of polyester vascular grafts only uPA is present in the neointima in the region of the graft to adjacent artery anastomosis, whereas in healed grafts in dogs and humans uPAR is found as well.

Current status of prosthetic bypass grafts: A review

Polymers such as Dacron and polytetrafluoroethylene (PTFE) have been used in high flow states with relative success but with limited application at lower flow states. Newer polymers with greater compliance, biomimicry, and ability to evolve into hybrid prostheses, suitable as smaller vessels, are now being introduced. In view of the advances in tissue engineering, this makes possible the creation of an ideal off-the-shelf bypass graft. We present a broad overview of the current state of prosthetic bypass grafts.