Anatomic basis of lag screw placement in the anterior column of the acetabulum

The Cervical Intervertebral Foramen: Microanatomy, Pathology, and Clinical Implications

STUDY DESIGN

This is an evidence-based narrative review article.

OBJECTIVE

We hope to provide a primer on cervical intervertebral foramen (cIVF) anatomy for spine surgeons, interventionalists, and physiatrists who regularly treat cervical spine pathology, and encourage further exploration of this topic.

BACKGROUND

This corridor for exiting cervical nerve roots is characterized by its intricate microanatomy involving ligamentous, nervous, and vascular structures. Degenerative changes such as facet hypertrophy and disc herniations alter these relationships, potentially leading to nerve root compression and cervical radiculopathy.

METHODS

This review synthesizes existing knowledge on the cIVF. Key imaging, cadaveric, and clinical studies serve as a foundation for this anatomic review.

RESULTS

We explore topics such as dynamic changes that affect foraminal size and their implications for nerve root compression, the relationship of the dorsal root ganglion to the cervical foramen, and the function and clinical significance of foraminal ligaments, arteries, and veins.

CONCLUSIONS

Changes in the cIVF are frequently the basis of cervical degenerative pathologies. A comprehensive understanding of its microanatomical structure will allow the practitioner to better treat the underlying disease process causing their symptoms and signs.

Evaluation of the effect of pelvis type in percutaneous acetabular column fixation: a computed tomography study

This study aimed to evaluate the effect of pelvis type in percutaneous acetabular column fixation. What is the effect of pelvis type in percutaneous acetabular colon fixation? The available pelvic computed tomography (CT) scans which were obtained in the diagnostic imaging center with a 1 mm slice width were evaluated. The pelvic type was classified with the help of MPR (Multiplanar Reformat) and 3D (Three Dimensional) imaging modes. All evaluated bony pelvic structures were anatomically intact. 40 types of android, gynecoid, anthropoid, and platypelloid pelvis were determined. CT sections were created in MPR imaging mode. Anterior obturator oblique (AOO) and inlet images were created for anterior column evaluation, while iliac oblique (IO) and outlet images were created for posterior column evaluation. The possibility of obtaining a linear corridor for acetabular columns was investigated by measuring corridor width and lengthon images of pelvic CTs. A linear corridor could not be obtained between the pubic tubercle and the supraacetabular region of 12 (30%) CTs in the anterior column of gynecoid pelvis group. The diameter of the anterior column corridor was below 5.5 mm in 10 (25%) of Gynecoid pelvis group, 5 (12.5%) of Anthropoid pelvis group, and 10 of Platypelloid pelvis group, , and all those scans belonged to the female gender. There was a statistically significant difference between pelvis types in terms of anterior and posterior column diameters (p <0.001). While the android pelvis type had the highest diameter and corridor length in both anterior column and posterior column measurements, the gynecoid pelvic type had the lowest diameter and corridor length. In the evaluations made according to gender, both anterior and posterior column diameters were larger and longer in males than in females (p <0.001). Pelvis type is an important factor which can affect anterior and posterior column diameter and length of acetabulum. Pelvic typing before acetabular surgery can help the surgeon determining the most appropriate patient position, surgical approach, and implant selection. Level of Evidence: Level 2.

Anterior cervical discectomy and fusion is more effective than cervical arthroplasty in relieving atypical symptoms in patients with cervical spondylosis

BACKGROUND AND PURPOSE

Patients with cervical spondylosis often present with concurrent 'atypical symptoms' of unknown etiology that have been associated with cervical spondylotic disease, including dizziness, headache, nausea, tinnitus, blurred vision, palpitations, and memory and gastrointestinal disturbances. Few studies have addressed whether surgical intervention to treat classic symptoms of cervical spondylosis can also effectively alleviate atypical symptoms. Accordingly, the purpose of this study is to compare the ability of cervical arthroplasty (CA) and anterior cervical discectomy and fusion (ACDF) to alleviate atypical symptoms associated with cervical spondylosis.

MATERIALS AND METHODS

A retrospective analysis of 140 patients with cervical spondylosis and associated atypical symptoms was performed. Atypical symptoms were defined vertigo, headache, nausea and vomiting, tinnitus, blur vision, palpitation, hypomnesia, and gastroenteric disturbances not otherwise explained by medical comorbidities. Seventy-eight patients (55.7%) underwent ACDF and 62 (44.3%) patients underwent CA. Demographics, surgical characteristics, patient reported outcome measures (PROMs), radiographs, complication rates, and resolution in atypical symptoms were recorded and compared between groups. Atypical symptoms were assessed using a 20-point system. All the patients had a minimum of five years follow-up.

RESULTS

VAS, SF-36, JOA, and NDI scores improved significantly in all the patients (p < 0.001). At the last follow-up, the fusion rate was 97% in the ACDF group. Atypical symptoms improved in both groups (p < 0.001), although the ACDF group demonstrated greater improvement in headache and vertigo resolution compared to the CA group (p < 0.0001).

CONCLUSIONS

While both ACDF and CA are effective in alleviating atypical symptoms associated with cervical spondylosis, ACDF demonstrated greater improvements in atypical symptoms.

Identification of safe channels for screws in the anterior pelvic ring fixation system

Background

Minimally invasive surgery for pelvic fracture using anterior ring internal fixator system is increasing gradually, and the way to insert the fixation screws in the fixation system is the key technical points of the method. However, there have been few studies on insertion of fixation screws for the anterior pelvic ring internal fixator system.

Objective

To identify safe channels for fixation screws in the anterior pelvic fixator system and provide the anatomical basis for insertion of fixation screws in clinical operation.

Methods

Screw insertion was simulated into a total of 40 pelvic finite element models as well as 16 fresh pelvic specimens, and the channel parameters were measured.

Results

Finite elements (male, female) include: screws in ilium: length 114.4 ± 4.1 and 107.6 ± 8.3 mm, respectively; diameter 11.7 ± 0.5 and 10.0 ± 0.6 mm, distance between screw and anterior inferior iliac spine: 5.5 ± 1.0 and 5.6 ± 1.0 mm, angle of coronal plane 55.8° ± 2.4° and 50.6° ± 3.1°, angle of sagittal plane 26.6° ± 1.0° and 24.5° ± 1.9° and angle of horizontal plane 64.9 ± 3.7 and 58.1 ± 3.1; screws in pubis: length 47.0 ± 2.0 and 39.8 ± 3.9 mm, diameter 7.1 ± 0.4 and 6.1 ± 0.4 mm. Specimens (male, female) include: distance between screw and anterior inferior iliac spine: 5.5 ± 0.5 and 5.6 ± 0.7 mm, angle of coronal plane 55.9° ± 1.3° and 50.7° ± 1.5°, angle of sagittal plane 26.7° ± 0.5° and 24.1° ± 0.9° and angle of horizontal plane 64.8° ± 0.6° and 58.8° ± 0.8°. In the comparison between female and male in each group, differences in distances between screws and anterior inferior iliac spine and median line of symphysis pubis (P > 0.05) were not statistically significant; differences in the remaining parameters were statistically significant (P < 0.05).

Conclusions

If surgeons paid attention to sex differences, select screws of appropriate diameter and length and hold the insertion position and direction, screws in the anterior pelvic ring fixation system could be safely inserted.

Cervical disc degeneration: important considerations for the manual therapist

Cervical disc degeneration (CDD) is a progressive, age-related occurrence that is frequently associated with neck pain and radiculopathy. Consistent with the majority of published clinical practice guidelines (CPG) for neck pain, the 2017 American Physical Therapy Association Neck Pain CPG recommends cervical manipulation as an intervention to address acute, subacute, and chronic symptoms in the 'Neck Pain With Mobility Deficits' category as well for individuals with 'Chronic Neck Pain With Radiating Pain'. While CPGs are evidence-informed statements intended to help optimize care while considering the relative risks and benefits, these guidelines generally do not discuss the mechanical consequences of underlying cervical pathology nor do they recommend specific manipulation techniques, with selection left to the practitioner's discretion. From a biomechanical perspective, disc degeneration represents the loss of structural integrity/failure of the intervertebral disc. The sequelae of CDD include posterior neck pain, segmental hypermobility/instability, radicular symptoms, myelopathic disturbance, and potential vascular compromise. In this narrative review, we consider the mechanical, neurological, and vascular consequences of CDD, including information on the anatomy of the cervical disc and the mechanics of discogenic instability, the anatomic and mechanical basis of radiculitis, radiculopathy, changes to the intervertebral foramen, the importance of Modic changes, and the effect of spondylotic hypertrophy on the central spinal canal, spinal cord, and vertebral artery. The pathoanatomical and biomechanical consequences of CDD are discussed, along with suggestions which may enhance patient safety.

[Digital study of the ideal position of lag screw internal fixation in the anterior column of the acetabulum]

Objective

To find the ideal position of lag screw internal fixation in the anterior column of acetabulum by digital technology, and measure its related parameters, so as to improve the accuracy of lag screw implantation.

Methods

The CT scan data of 266 semi-pelvic raw in 133 cases (78 males and 55 females, aged 18-65 years old with an average age of 42 years) were collected between January 2019 and January 2020 to compose three-dimensional models. According to the relationship between the peripheral bone cortex of the anatomical channel and the lag screw, a new standard for the ideal position of lag screw fixation in the anterior column of acetabulum was proposed to simulate the implantation of the screw. After the screw was in the ideal position, the following indicators were measured: the maximum allowable diameter of the virtual screw (the diameter of the cylinder up to the new standard, R), the length (the distance between the center of the nail point on both sides, L); the position of the retrograde nail point (the interval between the nail insertion points and the midpoint of the pubic symphysis and the pubic tubercle, respectively, D1 and D2) and the position of the antegrade nail insertion point (the distance between the nail insertion point and the anterior superior iliac spine, the major ischial notch, and the vertical distance between the nail insertion point and the apex of the posterior upper edge of the acetabulum, respectively, D3, D4, D5); and the direction of the virtual screw at the ideal position (the angle between the screw and the horizontal plane, sagittal plane, and coronal plane, respectively, ∠β, ∠γ, ∠δ) were calculated.

Results

The maximum allowable diameter of virtual screws was 5.70-14.10 mm for males, with an average of 9.25 mm; for females, it was 4.40-10.40 mm with an average of 7.29 mm. The antegrade insertion point of the anteroposterior acetabular lag screw was located at 2.0-2.5 cm above the apex of the acetabulum, which was almost the same distance from the anterior superior iliac spine and the ischial notch, about 5 cm; the insertion point of the retrograde implant was located at the pubic bone 2.5-3.0 cm below the nodule. When the acetabular anterior column screw was in the ideal position, there was no significant difference in the comparison of ∠β and ∠γ between the male and the female ( P>0.05), and the differences in the other indicators were significant ( P<0.05). Except for D4 and ∠β showing no significant difference between the left and right sides ( P>0.05), the differences in the other indicators were significant ( P<0.05).

Conclusion

In the bony channel of the anterior column of the acetabulum, all males can accommodate screws with a diameter of <5.70 mm, and females can accommodate screws with a diameter of <4.40 mm. The anterograde or retrograde screw insertion points are different for male and female. The use of digital technology to individually measure the appropriate screw parameters can improve the accuracy and stability of the lag screw internal fixation for acetabular anterior column fractures.

Antegrade anterior column screw placement in the lateral decubitus position utilizing an axial view: a technical trick

The placement of anterior column screws is a useful procedure and has standard views when placing this screw in the supine position. Feng et al. described an acetabular anterior column axial view for patients in the supine position for a placement of a retrograde anterior column screw [J Orthop Surg (Hong Kong) 25, 2309499016685012]. However, many acetabular fracture surgeries are performed in the lateral decubitus position due to a variety of reasons. Placing an antegrade anterior column screw in this position is difficult due to an unfamiliarity of the optimal fluoroscopic images. The purpose of this article is to describe a novel technique to obtain appropriate imaging to safely place an anterior column screw while the patient is in the lateral decubitus position.

Microanatomical considerations for safe uncinate removal during anterior cervical discectomy and fusion: 10-year experience

Cervical radiculopathy from uncovertebral joint (UVJ) hypertrophy and nerve root compression often occurs anterior and lateral within the cervical intervertebral foramen, presenting a challenge for complete decompression through anterior cervical approaches owing to the intimate association with the vertebral artery and associated venous plexus. Complete uncinatectomy during anterior cervical discectomy and fusion (ACDF) is a controversial topic, many surgeons relying on indirect nerve root decompression from restoration of disc space height. However, in cases of severe UVJ hypertrophy, indirect decompression does not adequately address the underlying pathophysiology of anterolateral foraminal stenosis. Previous reports in the literature have described techniques involving extensive dissection of the cervical transverse process and lateral uncinate process (UP) in order to identify the vertebral artery for safe removal of the UP. Recent anatomical investigations have detailed the microanatomical organization of the fibroligamentous complex surrounding the UP and neurovascular structures. The use of the natural planes formed from the encapsulation of these connective tissue layers provides a safe passage for lateral UP dissection during anterior cervical approaches. This can be performed from within the disc space during ACDF to avoid extensive lateral dissection. In this article, we present our 10-year experience using an anatomy-based microsurgical technique for safe and complete removal of the UP during ACDF for cervical radiculopathy caused by UVJ hypertrophy.

Incidence and risk factors of axial symptoms after cervical disc arthroplasty: a minimum 5-year follow-up study

BACKGROUND

The purpose of this study was to investigate whether uncovertebral joint ossification was a risk factor for axial symptoms (AS) after cervical disc arthroplasty (CDA).

METHODS

This retrospective study included 52 consecutive patients who underwent CDA for single-level cervical disc disease. To examine possible risk factors for AS after CDA, univariate and multivariate logistic regression analyses were conducted to compare data from the patients with and without AS (the AS and no-AS groups, respectively).

RESULTS

Among the 52 patients examined, AS were observed in 24 patients (46.2 %), including a stiff neck (n = 11), neck pain and dullness (n = 10), and shoulder pain (n = 3). Uncovertebral joint ossification was detected in 22 (42.3 %) patients, including 17 patients in the AS group and 5 patients in the no-AS group. Clinical outcome improved during the follow-up period for the AS group. According to multivariate logistic regression analysis, uncovertebral joint ossification, cervical kyphosis, and range of motion (ROM) at the index level were identified as significant risk factors for AS after CDA.

CONCLUSIONS

Satisfactory clinical outcomes were observed following CDA for the treatment of single-level cervical disc disease in the present cohort. In addition, uncovertebral joint ossification, cervical kyphosis, and ROM at the index level were found to affect the incidence of AS after CDA.

Modified Iliac Oblique-Outlet View: A Novel Radiographic Technique for Antegrade Anterior Column Screw Placement

Percutaneous fixation of acetabular fractures can be challenging because of the complex anatomy of the anterior column. We have used a modified iliac oblique-outlet image view in conjunction with more traditional radiographic views to place antegrade anterior column screws. This technique does not replace the pelvic inlet but is a good alternative in the lateral decubitus position because it helps to mitigate the difficulties of obtaining the pelvic inlet radiograph in this position. The purpose of this study is to describe the radiographic technique, demonstrate proper and aberrant screw placement using Sawbones, and present a review of patients in which this technique was used in clinical practice.

Percutaneous Anterior Column Fixation for Acetabulum Fractures, Does It Have to Be Difficult?-The New Axial Pedicle View of the Anterior Column for Percutaneous Fixation

Anterior column percutaneous screw fixation can be challenging. The purpose of this new technique is to offer a rapid, simple, and safe method to place an anterior screw. The authors used a 3-dimensional reconstruction simulation, cadaver study, and a clinical case series to demonstrate this new alternative to standard previously described techniques.

Surgical Anatomy of the Uncinate Process and Transverse Foramen Determined by Computed Tomography

Study Design Computed tomography-based cohort study. Objective Although there are publications concerning the relationship between the vertebral artery and uncinate process, there is no practical guide detailing the dimensions of this region to use during decompression of the intervertebral foramen. The purpose of this study is to determine the anatomic parameters that can be used as a guide for thorough decompression of the intervertebral foramen. Methods Fifty-one patients with three-dimensional computed tomography scans of the cervical spine from 2003 to 2012 were included. On axial views, we measured the distance from the midline to the medial and lateral cortices of the pedicle bilaterally from C3 to C7. On coronal reconstructed views, we measured the minimum height of the uncinate process from the cranial cortex of the pedicle adjacent to the posterior cortex of vertebral body and the maximal height of the uncinate process from the cranial cortex of the pedicle at the midportion of the vertebral body bilaterally from C3 to C7. Results The mean distances from midline to the medial and lateral cortices of the pedicle were 10.1 ± 1.3 mm and 13.9 ± 1.5 mm, respectively. The mean minimum height of the uncinate process from the cranial cortex of the pedicle was 4.6 ± 1.6 mm and the mean maximal height was 6.1 ± 1.7 mm. Conclusions Our results suggest that in most cases, one can thoroughly decompress the intervertebral foramen by removing the uncinate out to 13 mm laterally from the midline and 4 mm above the pedicle without violating the transverse foramen.

Virtual mapping of 260 three-dimensional hemipelvises to analyse gender-specific differences in minimally invasive retrograde lag screw placement in the posterior acetabular column using the anterior pelvic and midsagittal plane as reference

BACKGROUND

Due to complex pelvic geometry, percutaneous screw placement in the posterior acetabular column can pose a major challenge even for experienced surgeons.

METHODS

The present study examined the preformed bone stock of the posterior acetabular column in 260 hemipelvises. Retrograde posterior column screws were virtually implanted using iPlan CMF (BrainLAB AG, Feldkirchen, Germany); maximal implant length, maximal implant diameter and angles between the screw trajectories and the reference planes anterior pelvic plane as well as the midsagittal plane were assessed for gender-specific differences.

RESULTS

The virtual analysis of the preformed bone stock column showed two constrictions of crucial clinical importance. These were located 49.6 ± 3.4 (41.0-60.2) mm (inferior margin of acetabulum) and 77.0 ± 5.6 (66.5-95.3) mm (centre of acetabulum) from the entry point of the implant in men and respectively 43.7 ± 2.3 (38.3-49.3) mm as well as 71.2 ± 3.5 (63.5-79.99) mm in women (men vs. women: p < 0.001). The entry point of the retrograde posterior column screw was located dorsal from the transition of the lower margin of the ischial tuberosity to ramus inferior pointing to the medial margin of the ischial tuberosity. In female patients, the entry point was located significantly closer to the medial margin of the ischial tuberosity. However, 7.3 mm screws can generally be used in men and women. The angle between the screw trajectory and the anterior pelvic plane in sagittal section was 14.0 ± 4.9 (2.5-28.6) °, the angle between the screw trajectory and the midsagittal plane in axial section was 31.1 ± 12.8 (1.5-77.9) ° and the angle between the screw trajectory and the midsagittal plane in coronal section was 8.4 ± 3.8 (1.5-20.0) °. For all angles, significant gender-specific differences were found (p < 0.001).

CONCLUSION

Therefore, the anterior pelvic plane as well as the midsagittal plane can facilitate intraoperative orientation for retrograde posterior column screw placement considering gender-specific differences in preformed bone corridor, implant length as well as angles formed between screw trajectory and these reference planes.

Axial perspective to find the largest intraosseous space available for percutaneous screw fixation of fractures of the acetabular anterior column

OBJECTIVE

To find the largest screw path in the acetabular anterior column using a novel method of axial perspective and test the clinical feasibility of the anterior column axial view projection.

METHODS

3D models with the inner triangular patches deleted were created from the pelvic CT scan data of 58 normal pelvises. The transparency of each 3D model was downgraded at the axial perspective (the view perpendicular to the cross section of the anterior column axis) so that a translucent area was seen clearly. The orientations of each 3D model were adjusted until a triangle-like translucent area that could accommodate the largest virtual screw (Screw I) was present and then an ellipse-like translucent area that could accommodate the two largest virtual screws (Screw II) was present. The maximum diameter, direction of Screw I and the maximum diameter Screw II were measured. Clinical feasibility of the axial view projection was next tested in five cadaveric specimens.

RESULTS

The mean maximum diameters of Screw I and Screw II were 11.20 ± 1.73 (7.80-14.60 mm) and 8.71 ± 0.91 (6.60-10.60 mm), respectively. The angles of Screw I to the transverse, coronal and sagittal planes were 41.16° ± 4.59°, 18.18° ± 1.15° and 44.33° ± 4.31°, respectively. Translucent areas were successfully observed in all the cadaveric hemi-pelves and guide pins were successfully inserted in all the cadaveric hemi-pelves with the assistance of the anterior column axial view projection without cortex penetration or joint violation.

CONCLUSIONS

The acetabular anterior column could safely accommodate not only one 7.3-mm screw, but also two 6.5-mm screws. The anterior column axial projection may be clinically feasible.

Sex-specific differences of the infraacetabular corridor: a biomorphometric CT-based analysis on a database of 523 pelves

BACKGROUND

An infraacetabular screw path facilitates the closure of a periacetabular fixation frame to increase the plate fixation strength in acetabular fractures up to 50%. Knowledge of the variance in corridor sizes and axes has substantial surgical relevance for safe screw placement.

QUESTIONS/PURPOSES

(1) What proportion of healthy pelvis specimens have an infraacetabular corridor that is 5 mm or larger in diameter? (2) Does a universal corridor axis and specific screw entry point exist? (3) Are there sex-specific differences in the infraacetabular corridor size or axis and are these correlated with anthropometric parameters like age, body weight and height, or the acetabular diameter?

METHODS

A template pelvis with a mean shape from 523 segmented pelvis specimens was generated using a CT-based advanced image analyzing system. Each individual pelvis was registered to the template using a free-form registration algorithm. Feasible surface regions for the entry and exit points of the infraacetabular corridor were marked on the template and automatically mapped to the individual samples to perform a measurement of the maximum sizes and axes of the infraacetabular corridor on each specimen. A minimum corridor diameter of at least 5 mm was defined as a cutoff for placing a 3.5-mm cortical screw in clinical settings.

RESULTS

In 484 of 523 pelves (93%), an infraacetabular corridor with a diameter of at least 5 mm was found. Using the mean axis angulations (54.8° [95% confidence interval {CI}, 0.6] from anterocranial to posterocaudal in relation to the anterior pelvic plane and 1.5° [95% CI, 0.4] from anteromedial to posterolateral in relation to the sagittal midline plane), a sufficient osseous corridor was present in 64% of pelves. Allowing adjustment of the three-dimensional axis by another 5° included an additional 25% of pelves. All corridor parameters were different between females and males (corridor diameter, 6.9 [95% CI, 0.2] versus 7.7 [95% CI, 0.2] mm; p<0.001; corridor length, 96.2 [95% CI, 0.7] versus 106.4 [95% CI, 0.6] mm; p<0.001; anterior pelvic plane angle, 54.0° [95% CI, 0.9] versus 55.3° [95% CI, 0.8]; p<0.01; sagittal midline plane angle, 4.3° [95% CI, 0.6] versus -0.3° [95% CI, 0.5]; p<0.001).

CONCLUSION

This study provided reference values for placement of a 3.5-mm cortical screw in the infraacetabular osseous corridor in 90% of female and 94% of male pelves. Based on the sex-related differences in corridor axes, the mean screw trajectory is approximately parallel to the sagittal midline plane in males but has to be tilted from medial to lateral in females. Considering the narrow corridor diameters, we suggest an individual preoperative CT scan analysis for fine adjustments in each patient.

Morphological observation of sympathetic nerve fibers in the human posterior longitudinal ligament

STUDY DESIGN

Histological study of human living tissue.

OBJECTIVE

To determine sympathetic fiber in the cervical posterior longitudinal ligaments (PLL) obtained from the patients undergoing anterior cervical decompression surgery, and speculate the implication of their presence and distribution.

SUMMARY OF BACKGROUND DATA

The pathogenic mechanism responsible for cervical spondylosis remains unclear. Cervical vertigo is often confused with aural vertigo, and central vertigo, and et al. It has been gradually realized that mechanical interference to the vertebral artery is not the only way to explain the pathogenic mechanism of cervical vertigo. It should be noted that the sympathetic factor may also involve it because some sympathetic nerves were found in the PLL in an animal study of intervertebral discs. Although it is unclear whether there is a similar phenomenon in adult human PLL.

METHODS

Forty-six patients who received anterior cervical decompression surgery in The Affiliated Hospital of Qingdao University from January 2013 to December 2013 were classified into 2 groups: with cervical spondylosis and with cervical trauma. Cervical PLL tissues of all the participants were obtained during operation. The paraffin slices of the ligament were stained according to glyoxylic acid-induced fluorescent method. The morphology and distribution of sympathetic nerve fibers were observed by measuring and analyzing fluorescent units expressed on different sections. The positive rates expressed by fluorescent staining were statistically analyzed.

RESULTS

Different forms of sympathetic nerve fibers distribution were observed in the 3-dimensional slices in each group selected from 46 cases of specimens. The positive rate of fluorescent units detected from the cervical PLL in patients experiencing cervical spondylosis was not significantly different from that in cervical trauma group (x = 0.969, P > 0.05).

CONCLUSION

Sympathetic nerve fibers were confirmed to distribute in the human cervical posterior longitudinal ligament.

LEVEL OF EVIDENCE

2.

Retrograde lag screw placement in anterior acetabular column with regard to the anterior pelvic plane and midsagittal plane -- virtual mapping of 260 three-dimensional hemipelvises for quantitative anatomic analysis

Percutaneous screw placement can be used for minimally invasive treatment of none or minimally displaced fractures of the anterior column. The complex pelvic geometry can pose a major challenge even for experienced surgeons. The present study examined the preformed bone stock of the anterior column in 260 hemipelvises (130 male and 130 female). Screws were virtually implanted using iPlan(®) CMF (BrainLAB AG, Feldkirchen, Germany); the maximal implant length and the maximal implant diameter were assessed. The study showed, that 6.5mm can generally be used in men; in women however individual planning is essential in regard to the maximal implant diameter since we found that in 15.4% of women, screws with a diameter less than 6.5mm were necessary. The virtual analysis of the preformed bone stock corridor of the anterior column showed two constrictions of crucial clinical importance. These can be found after 18% and 55% (men) respectively 16% and 55% (women) measured from the entry point along the axis of the implant. The entry point of the retrograde anterior column screw in our collective was located lateral of tuberculum pubicum at the level of the superior-medial margin of foramen obturatum. In female patients, the entry point was located significantly more lateral of symphysis and closer to the cranial margin of ramus superior ossis pubis. The mean angle between the screw trajectory and the anterior pelvic plane in sagittal section was 31.6 ± 5.5°, the mean angle between the screw trajectory and the midsagittal plane in axial section was 55.9 ± 4.6° and the mean angle between the screw trajectory and the midsagittal plane in coronal section was 42.1 ± 3.9° with no significant deviation between both sexes. The individual angles formed by the screw trajectory and the anterior pelvic and midsagittal plane are independent from anthropometric parameters sex, age, body length and weight. Therefore, they can be used for orientation in lag screw placement keeping in mind that the entry point differs in both sexes.

Sympathetic nerve innervation in cervical posterior longitudinal ligament as a potential causative factor in cervical spondylosis with sympathetic symptoms and preliminary evidence

Sympathetic symptoms associated with cervical disorders, such as vertigo, headache, dizziness, etc., are common clinical disorders bewildering both clinicians and patients. In our clinical practice we observed that sympathetic symptoms associated with cervical disorders were apparently relieved in some patients after undergoing routine anterior cervical decompression and fusion plus posterior longitudinal ligament (PLL) resection. This study was designed to investigate the sympathetic nerve innervations in the cervical PLL and its potential correlation with cervical sympathetic symptoms such as vertigo.

METHOD

In animal research, cervical PLLs of 9 adult rabbits were harvested and stained with sucrose-phosphate-glyoxylic acid (SPG), which is a specific fluorescence staining method for sympathetic postganglionic fibers. In human research, cervical PLL of 8 patients of cervical spondylosis with sympathetic symptoms were harvested during surgery and stained with SPG. All sections were observed under fluorescence microscope. Sympathetic symptoms were evaluated using the sympathetic symptom 20-point score preoperatively and at 1 week, 2-month, and 6-month postoperatively.

RESULTS

In rabbit specimens, a large number of sympathetic postganglionic fibers were distributed in the cervical PLL of every segment. The density of sympathetic fibers distributed in the intervertebral portion of PLL was more than that in the vertebral portion. Compared with deep layer section, the nerve fibers in the superficial PLL layer section were thicker and more densely populated. Existence of sympathetic postganglionic fibers was also confirmed in human specimens. Those nerve fibers were mostly short and isolated in areatus form, with non-interwoven branches. The mean sympathetic symptoms score decreased significantly from 6.6 ± 2.6 before surgery to 2.0 ± 1.9 at 6 months postoperatively after anterior cervical decompression and fusion with PLL removed.

CONCLUSION

According to the experimental result and clinical practice, we hypothesized that sympathetic nerve fibers distributed in PLL may represent a pathologic basis of stimulation induced by cervical vertebral degenerative changes and thus are susceptible to being a potential causative factor in cervical spondylosis with sympathetic symptoms.

Measurement of the "safe zone" and the "dangerous zone" for the screw placement on the quadrilateral surface in the treatment of pelvic and acetabular fractures with Stoppa approach by computational 3D technology

This study is aimed at definition of the safe and dangerous zone for screw placement with Stoppa approach for rapid identification during operation and a new way for the studies on the “safe zone.” Pelvic CT data of 84 human subjects were recruited to reconstruct the three-dimensional (3D) models. The distances between the edges of the “safe zone,” “dangerous zone,” and specific anatomic landmarks such as the obturator canal and the pelvic brim were precisely measured, respectively. The results show that the absolute “dangerous zone” was from the pelvic brim to 3.07 cm below it and within 2.86 cm of the obturator canal, while the region 3.56 cm below the pelvic brim or 3.85 cm away from the obturator canal was the absolute “safe zone” for screw placement. The region between the absolute “safe zone” and the absolute “dangerous zone” was the relatively “dangerous zone.” As a conclusion, application of computer-assisted 3D modeling techniques aids in the precise measurement of “safe zone” and “dangerous zone” in combination with Stoppa incision. It was not recommended to place screws on the absolute dangerous zone, while, for the relatively “dangerous zone,” it depends on the individual variations in bony anatomy and the fracture type.

Anatomy and clinical significance of the uncinate process and uncovertebral joint: A comprehensive review

INTRODUCTION

The uncinate process and its associated uncovertebral articulation are features unique to the cervical spine. This review examines the morphology of these unique structures with particular emphasis on the regional anatomy, development and clinical significance.

MATERIALS AND METHODS

Five electronic databases were utilized in the literature search and additional relevant citations were retrieved from the references. A total of 74 citations were included for review.

RESULTS

This literature review found that the uncinate processes and uncovertebral articulations are rudimentary at birth and develop and evolve with age. With degeneration they become clinically apparent with compression of related structures; most importantly affecting the spinal nerve root and vertebral artery. The articulations have also been found to precipitate torticollis when edematous and be acutely damaged in severe head and neck injuries. The uncinate processes are also important in providing stability and guiding the motion of the cervical spine.

CONCLUSION

This review is intended to re-examine an often overlooked region of the cervical spine as not only an interesting anatomical feature but also a clinically relevant one.

Anatomical study of anterior column screw tunnels through virtual three-dimensional models of the pelvis

We created 66 male and 74 female virtual three-dimensional models of the pelvis based on computed tomography data from 140 patients. Virtual cylindrical bolts (VCBs) were placed in the anterior column (AC), which was then resliced serially along the bolt's long axis. AC screw tunnel mainly comprises two long, narrow triangular prisms [zone III (acetabular fossa) and zone V (obturator foramen)]--forming the III/V angle--linked by a larger, shorter cylinder [zone IV (acetabular notch)]. VCBs' mean length and maximum diameter were 111.13 ± 7.33 and 7.37 ± 1.90 mm, respectively. The models' anatomical zone lengths were similar between the sexes. Zone V's narrowest diameters and the III/V angles were significantly different. VCBs >6.5 mm were accommodated in 65 of 66 male models and 31 of 74 female models. VCBs >5.0 and <6.5 mm were accommodated in one male and 30 female models. Eleven female models accommodated only VCBs >3.5 and <5.0 mm. However, to 13 female pelvic models with maximum VCB accommodation of <5 mm for the anterior column, the maximum diameter of the VCBs was 8.23 ± 1.22 mm in medial passage and 10.3 ± 1.91 mm in lateral passage, respectively. Percutaneous fixation of the AC with screws is a safe technique, even though in Chinese female patients. The narrowest diameters in zone V and the III/V angles are the key factors for application of AC screws. Female patients with a smaller interosseous space at zone V and a large III/V angle can accommodate segmental passage screws.

An evaluation of three-dimensional image-guided technologies in percutaneous pelvic and acetabular lag screw placement

BACKGROUND

Percutaneous stabilization using three-dimensional (3D) navigation system is a promising treatment for pelvic and acetabular fractures. However, there are still some controversies regarding the use of 3D navigation to treat pelvic and acetabular fractures. The purpose of this study was to compare the Iso-C(3D) fluoroscopic navigation, standard fluoroscopy, and two-dimensional (2D) fluoroscopic navigation in placing percutaneous lag screws in pelvic specimens to better understand the merits of 3D navigation techniques.

METHODS

Fifty-four instrumentation procedures were performed in this study using six cadaveric pelvic specimens. Three groups were designated for different procedures and tests: group I, standard fluoroscopy; group II, 2D fluoroscopic navigation; and group III, Iso-C(3D) fluoroscopic navigation. Nine screws were placed in each pelvis, including four screws placed bilaterally through the ilium into S1 and S2 vertebrae, four screws placed bilaterally through anterior and posterior columns of acetabulum, and one screw placed through the pubic symphysis. 3D fluoroscopic techniques were evaluated to determine the accuracy of screw position, instrumentation time, and fluoroscopic time. The data were statistically analyzed using SPSS 13.0.

RESULTS

The malposition rate was 38.89%, 22.22%, and 0% in standard fluoroscopy, 2D fluoroscopic navigation, and Iso-C(3D) fluoroscopic navigation groups, respectively. There was no significant difference between standard fluoroscopy and 2D fluoroscopic navigation. Compared with Iso-C(3D) fluoroscopic navigation, there were significant differences (analysis of variance [ANOVA], P < 0.05). The mean instrumentation operating time using Iso-C(3D) fluoroscopic navigation technique was 15.4 ± 4.5 min. There were significant differences compared with standard fluoroscopy (31.5 ± 6.2 min) and 2D fluoroscopic navigation (26.3 ± 7.5 min; ANOVA, post hoc Scheffe, P < 0.01). The mean fluoroscopic time of Iso-C(3D) fluoroscopic navigation was 66 ± 4.8 min. Compared with standard fluoroscopy (132.8 ± 7.3 min) and 2D fluoroscopic navigation (47.7 ± 5.6 min), there were significant differences (ANOVA, post hoc least significant difference, P < 0.01).

CONCLUSIONS

In the present study, we compared Iso-C(3D) fluoroscopic navigation, 2D fluoroscopic navigation, and standard fluoroscopy. Iso-C(3D) fluoroscopic navigation showed a higher accuracy rate in positioning and a shorter instrumentation operating time. The fluoroscopic time was longer in Iso-C(3D) fluoroscopic navigation than that in standard fluoroscopy, indicating that radiation exposure can be moderately reduced in Iso-C(3D) fluoroscopic navigation operation, although the fluoroscopic time was the shortest in 2D fluoroscopic navigation.

Safe surgical technique for associated acetabular fractures

Associated acetabular fractures are challenging injuries to manage. The complex surgical approaches and the technical difficulty in achieving anatomical reduction imply that the learning curve to achieve high-quality care of patients with such challenging injuries is extremely steep. This first article in the Journal's "Safe Surgical Technique" section presents the standard surgical care, in conjunction with intraoperative tips and tricks, for the safe management of all subgroups of associated acetabular fractures.

A safe technique of anterior column lag screw fixation in acetabular fractures

PURPOSE

Conventional anterior column lag screw fixation in acetabular fracture is a difficult technique that has potential risks of vascular injury, hip joint penetration and excessive radiation exposure. We propose a safe technique of anterior column lag screw fixation (in-out-in technique) and present the outcome.

MATERIALS AND METHODS

Twenty-seven acetabular fractures were operated through an iliofemoral approach, where the 'in-out-in technique' of lag screw fixation was a part of the surgical procedure. The technique involved insertion of a malleolar screw (4.5 mm) or 6.5 mm partially threaded cancellous screw from the outer side of the iliac wing, 0.5-1 cm posterior and inferior to the anteroinferior iliac spine. The screw comes out of the bone surface to re-enter into the anterior part of iliopectineal eminence, and finally gains purchase in the lateral part of superior pubic ramus. The screw fixation procedure was under direct visualization without resorting to an image intensifier. The average follow-up of the patients was at 18.6 months (range 12-36 months).

RESULTS

No loss of reduction, joint penetration or visceral and neurovascular injury were documented. The average duration of surgery was 70 min and blood loss was 290 ml. All fractures were united after an average period of 2.8 months. Excellent to good functional outcome was observed in 24 patients (88 %), on evaluation with Merle D'Aubigne and Postel score at the latest follow-up.

CONCLUSION

We conclude that the 'in-out-in technique' is a safe and effective method of anterior column lag screw fixation in acetabular fractures. It provides rigid stability and minimizes surgical duration, radiation exposure and intra-operative complications.

Three-dimensional motion of the uncovertebral joint during head rotation

Object

The uncovertebral joints are peculiar but clinically important anatomical structures of the cervical vertebrae. In the aged or degenerative cervical spine, osteophytes arising from an uncovertebral joint can cause cervical radiculopathy, often necessitating decompression surgery. Although these joints are believed to bear some relationship to head rotation, how the uncovertebral joints work during head rotation remains unclear. The purpose of this study is to elucidate 3D motion of the uncovertebral joints during head rotation.

Methods

Study participants were 10 healthy volunteers who underwent 3D MRI of the cervical spine in 11 positions during head rotation: neutral (0°) and 15° increments to maximal head rotation on each side (left and right). Relative motions of the cervical spine were calculated by automatically superimposing a segmented 3D MR image of the vertebra in the neutral position over images of each position using the volume registration method. The 3D intervertebral motions of all 10 volunteers were standardized, and the 3D motion of uncovertebral joints was visualized on animations using data for the standardized motion. Inferred contact areas of uncovertebral joints were also calculated using a proximity mapping technique.

Results

The 3D animation of uncovertebral joints during head rotation showed that the joints alternate between contact and separation. Inferred contact areas of uncovertebral joints were situated directly lateral at the middle cervical spine and dorsolateral at the lower cervical spine. With increasing angle of rotation, inferred contact areas increased in the middle cervical spine, whereas areas in the lower cervical spine slightly decreased.

Conclusions

In this study, the 3D motions of uncovertebral joints during head rotation were depicted precisely for the first time.

Morphometrical study of uncinate processes and vertebral body of cervical spine

OBJECTIVE

The anatomical knowledge is the most important and has a direct link with success of operation in cervical spine surgery. The authors measured various cervical parameters in cadaveric dry bones and compared with previous reported results.

METHODS

We made 255 dry bones age from 19 to 72 years (mean, 42.3 years) that were obtained from 51 subjects in 100 subjects who donated their bodies. All measurements from C3-C7 levels were made using digital vernier calipers, standard goniometer, and self-made fix tool for two different cervical axes (canal and disc setting). We classified into 4 groups (uncinate process, vertebral body, lamina, and pedicle) and measured independently by two neurosurgeons for 28 parameters.

RESULTS

We analyzed 23970 measurements by mean value and standard deviations. In comparing with previous literatures, there are some different results. The mean values for uncinate process (UP) width ranged from 5.5 mm at C4 and 5 to 6.3 mm at C3 and C7 in men. Also, in women, the mean values for UP width ranged from 5.5 mm at C5 to 6.3 mm at C7. C7 was widest and C5 was most narrow than other levels. The antero-posterior length of UP tended to increase gradually from C3 to C6. The tip way, tip distance, and base distance of UP also showed increasing pattern from C3 to C7.

CONCLUSION

These measurements can provide the spinal surgeons with a starting point to address bony architectures surrounding targeted soft tissues for safeguard against unintended damages during cervical operation.

Degenerative pathological irritations to cervical PLL may play a role in presenting sympathetic symptoms

The mechanism of cervical vertigo remains unknown. Stimulation of arterial vertebralis caused by osteophyte of the Luschka joint or segmental instability of the cervical spine was considered to be a potential factor contributing to it. Years of studies found that the ischemia of the vertebral artery is not directly correlated with the clinical symptoms of vertigo, and can not be used to explain cervical vertigo as a sole reason. As proven by clinical practical experience, the routine anterior cervical decompression and fusion (ACDF) procedure, in which the degenerative disc and posterior longitudinal ligament (PLL) were often removed, shows positive results for elimination of the sympathetic symptoms. In this article, we hypothesize that: (1) there are sympathetic nerve postganglionic fibers distributed in the PLL or discs; (2) pathological changes secondary to degeneration of the intervertebral disc may cause irritation of sympathetic nerve fibers in PLL or discs, leading to sympathetic symptoms via certain pathways; (3) removal of the PLL or stabilization of the segment which decreases the irritation to PLL will help to eliminate the sympathetic symptoms.

The surgical treatment of anterior column and anterior wall acetabular fractures

Isolated fractures of the anterior column and anterior wall are a relatively rare subgroup of acetabular fractures. We report our experience of 30 consecutive cases treated over ten years. Open reduction and internal fixation through an ilioinguinal approach was performed for most of these cases (76.7%) and percutaneous techniques were used for the remainder. At a mean follow-up of four years (2 to 6), 26 were available for review. The radiological and functional outcomes were good or excellent in 23 of 30 patients (76.7%) and 22 of 26 patients (84.6%) according to Matta’s radiological criteria and the modified Merlé d’Aubigné score, respectively.

Complications of minor to moderate severity were seen in six of the 30 cases (20%) and none of the patients underwent secondary surgery or replacement of the hip.

Rotational vertebral artery occlusion-series of 9 cases

BACKGROUND

Rotational vertebral artery syndrome (RVAS) is a rare entity about which previously published studies are mostly limited to individual case reports.

OBJECTIVE

To report our decade-long experience with this syndrome in 9 patients with compression ranging from the occiput to C6.

METHODS

We utilized a posterior approach for lesions rostral to C4 and an anterior approach for lesions at or caudal to C4. Furthermore, we demonstrated the feasibility and efficacy of a minimally invasive posterior cervical approach. Patient profile, operative indications, surgical approach, operative findings, complications, and long-term follow-up were reviewed and discussed.

RESULTS

Average follow-up was 47 months. All procedures provided excellent outcomes by Glasgow Outcome Scale scores. The anterior approach had significantly less blood loss (187.5 mL vs 450 mL, P = .00016) and shorter hospitalization length (2 days vs 4.5 days; P = .0001) compared with the far-lateral approach. There was one complication of cervical instability in the far-lateral approach cohort. As an alternative to the far-lateral surgery, a minimally invasive approach resulted in shorter hospitalization (2 days) and less blood loss (10 mL) while avoiding the complication of cervical instability.

CONCLUSION

We demonstrated the safety, efficacy, and durability of 3 surgical approaches for RVAS. Proper examination, preoperative imaging, and surgical planning were necessary for a satisfactory outcome.

Computer-assisted periacetabular screw placement: Comparison of different fluoroscopy-based navigation procedures with conventional technique

The current gold standard for operatively treated acetabular fractures is open reduction and internal fixation. Fractures with minimal displacement may be stabilised by minimally invasive methods such as percutaneous periacetabular screws. However, their placement is a demanding procedure due to the complex pelvic anatomy. The aim of this study was to evaluate the accuracy of periacetabular screw placement assessing pre-defined placement corridors and comparing different fluoroscopy-based navigation procedures and the conventional technique. For each screw an individual periacetabular placement corridor was preoperatively planned using the planning software iPlan CMF(©) 3.0 (BrainLAB). 210 screws (retrograde anterior column screws, retrograde posterior column screws, supraacetabular ilium screws) were placed in an artificial Synbone pelvis model (30 hemipelves) and in human cadaver specimen (30 hemipelves). 2D- and 3D-fluoroscopy-based navigation procedures were compared to the conventional technique. Insertion time and radiation exposure to specimen were also recorded. The achieved screw position was postoperatively assessed by an Iso-C(3D) scan. Perforations of bony cortices or articular surfaces were analysed and the screw deviation severity (difference of the operatively achieved screw position and the preoperatively planned screw position in reference to the pre-defined corridors) was determined using image fusion. Using 3D-fluoroscopy-based navigation, the screw perforation rate (7%) was significantly lower compared to 2D-fluoroscopy-based navigation (20%). For all screws, the deviation severity was significantly lower using a 3D- compared to a 2D-fluoroscopy-based navigation and the conventional technique. Analysing the posterior column screws, the screw deviation severity was significantly lower using 3D- compared to 2D-fluoroscopy-based navigation. However, for the anterior column screw, the screw deviation severity was similar regardless of the imaging method. Despite the advantages of the 3D-fluoroscopy-based navigation, this method led to significantly longer total procedure and fluoroscopic times, and the applied radiation dose was significantly higher. Percutaneous periacetabular screw placement is demanding. Especially for posterior column screws, due to a lower perforation rate and a higher accuracy in periacetabular screw placement, 3D-fluoroscopy-based navigation procedure appears to be the method of choice for image guidance in acetabular surgery.

Percutaneous screw fixation of acetabular fractures: applicability of hip arthroscopy

Percutaneous screw fixation of the anterior column of the acetabulum has been a challenging task because of its unique anatomy and a risk of intra-articular penetration. Evidence is lacking for any tools to provide visual scrutiny of fracture reduction and intra-articular screw penetration. We report 2 cases of fracture of the acetabulum that developed in young female athletes, in which the anterior column was fixed with a percutaneous screw by use of hip arthroscopy as an assisting tool for intra-articular observation. In our experience this method was found to be promising in terms of anatomic reduction of the fracture site, avoiding articular penetration during screw insertion, with additional advantages of joint debridement, lavage, and reduction in radiation exposure.

Mapping the columns of the acetabulum--implications for percutaneous fixation

Knowledge of the bony thickness of the acetabular columns is one requisite for safe execution of percutaneous fixation of acetabular fractures. We performed a cadaveric study to determine anatomical dimensions of the columns of acetabulum with reference to percutaneous screw fixation. Twenty-two hemipelves (11 pairs) from 6 male and 5 female cadavers were measured and statistically analysed. In the anterior column, the psoas groove displayed the least vertical thickness of 15.1mm (range, 12.1-18.2mm), followed by the obturator canal with 15.9 mm (range, 12.2-20.6mm). The mean thickness of the posterior column wall of the acetabulum along the screw path displayed 21.3mm (range, 16.5-30.3mm). This study provides a clinical map for safe passage of both antegrade and retrograde percutaneous screws. Anatomic data suggests that 7.3mm cannulated screws can be safely accommodated by the anterior and posterior columns of the acetabulum.

Quantitative anatomic basis of antegrade lag screw placement in posterior column of acetabulum

BACKGROUND

Lag screw fixation has been recommended for treatment of acetabular and pelvic fracture for several years. The aim of the present study was to determine the projection of the axis of the posterior column on the inner table of the iliac wing in the supra-acetabular region.

METHODS

Thirty adult dried bony hemipelves specimens and other five intact adult dried pelvic specimens were included in this study. The projection point of the axis of the posterior column of the acetabulum was determined on the inner table of the iliac wing of the hemipelves specimens. The perpendicular distance from the optimal entry point to the linea terminalis of pelvis was measured and recorded as the lateral distance. The same measurement along the linea terminalis from the optimal entry point to the junction between the anterior border of iliosacral articulation and the linea terminalis of pelvis was made and recorded as the posterior distance. The depth of the anchor path and the corresponding average retroversion angulation and extraversion angulation were also measured. According to the results acquired from this study, a series of 6.5 mm lag screws were inserted into the posterior column of each side of the other five intact specimens, respectively, to evaluate the position of the screws. The data were expressed as mean +/- SD and analyzed by using the descriptive methods with SPSS 10.0.

RESULTS

The average length of lag screw was 104.8 +/- 4.2 mm. The average lateral distance was 16.8 +/- 2.1 mm. The average posterior distance was 23.5 +/- 3.4 mm. The corresponding average retroversion angulation and extraversion angulation were 57 degrees 36' +/- 4 degrees 28' and 119 degrees 18' +/- 2 degrees 32', respectively. The insertion of the single 6.5 mm lag screw of adequate length was possible in the posterior column along its anchor path and no accidental extraosseous or intraarticular screw placement had occurred.

CONCLUSIONS

The present study describes a safe anchor path of antegrade lag screw fixation in the posterior column. Insertion of the lag screws of adequate length is possible in the posterior column along its functional axis.

Differences of percutaneous retrograde screw fixation of anterior column acetabular fractures between male and female: a study of 164 virtual three-dimensional models

INTRODUCTION

Percutaneous retrograde screw fixation of the anterior column has been recommended for the treatment of minimally displaced acetabular fractures. However, proper placement of the screw in anterior column is challenging because of its unique anatomy. There are few anatomic studies on this technique, and the differences between male and female have never been reported.

METHODS

We created virtual three-dimensional reconstruction models of the pelvis from CT scan data obtained from 82 adult patients without any bony problems. Virtual cylindrical implants were placed intraosseously both in left and right anterior column. The maximum diameter, length and optimal direction of the virtual cylindrical implant were determined for the screw. The perpendicular distance from the insertion point (P) of virtual cylindrical implant to the pubic symphysis (A) and the rim of superior ramus of pubis (B) were measured respectively. In the same model, cross-sections of the anterior column were created and the diameters of them were measured.

RESULTS

164 (80 males and 84 females) hemipelvis models were obtained. The mean maximum diameter and length of virtual cylindrical implant were 8.16+/-1.21 mm (range: 5.60-10.80 mm) and 109.39+/-8.95 mm respectively. The angles of the virtual cylindrical implant to transverse, coronal and sagittal planes were 39.66+/-3.92 degrees , 20.81+/-4.58 degrees and 42.66+/-3.23 degrees respectively. The distance of PA and PB were 18.42+/-4.82 mm and 17.76+/-2.63 mm. Both the differences of the diameter and length of the virtual cylindrical implant, and the distance of PA between the male and female were of statistical significance (p<0.00001). The mean minimum cross-sectional diameter of anterior column was larger than the mean diameter of the virtual cylindrical implant.

CONCLUSIONS

The anterior column of a male will accommodate a 6.5mm lag screw very well, but it does not fit all the females. The same direction of screw can be used in both male and female, but the insertion points of the screw are different. In addition, the determination of the size of the screw used for the anterior column cannot be based solely on the measurement of cross-sectional diameter and the virtual three-dimensional reconstruction model might be useful in preoperative planning.

Operative treatment of transverse acetabular fractures: is it really necessary to fix both columns?

OBJECTIVE

we prospectively evaluated clinical and radiographic outcomes in patients with displaced combined transverse-posterior wall acetabular fractures managed at our Institution over a period of seven years by posterolateral single approach, direct posterior wall and posterior column reduction and plating, and indirect reduction of anterior column controlled by fluoroscopic images with or without lag-screw fixation. The aim was to identify if the obtained immediate postoperative Matta radiographic roof-arc angles after fracture reduction and fixation alters in the postoperative period when comparing posterior plating alone versus posterior plate and anterior column lag-screw fixation.

PATIENTS AND METHODS

35 skeletally mature patients (31 male and four female, with mean age of 39.9 years old [range, 23.3 to 66.7 y/o]) with combined transverse-posterior wall acetabular fractures surgically treated by a posterolateral single approach were enrolled in this prospective investigation. Nineteen patients had associated orthopaedic injuries. The first part of the acetabular fracture management was similar to all patients and consisted in anatomical reduction and fixation of the transverse posterior component followed by anatomical reduction and fixation of the posterior wall component. The transverse anterior component reduction was controlled by fluoroscopic images (anteroposterior (AP), iliac oblique, and obturator oblique views) and digital palpation through the greater sciatic notch. Fifteen of the 35 patients had an additional lag-screw fixation from the posterior to the anterior columns with an extra-long small-fragment cortical screw. AP and Judet oblique radiographic views were taken at the end of the procedure and roof-arc angles were measured. Clinical results were assigned according to the grading system of Merle D'Aubigne and Postel as modified by Matta et al. Radiographic roof-arc angles were checked and compared between the two groups of patients to the same data collected both at the time of the surgical procedure and at three months postoperatively. Statistical analysis was done by either using chi-square (clinical outcome) and Mann-Whitney (roentgenographic outcome) tests, with a level of significance of alpha = 5%.

RESULTS

at final follow-up examination 18 to 84 months postoperatively (mean, 46.8 months), the clinical results were considered satisfactory in 31 (88.6%) patients (excellent in nine (25.7%) and good in 22 (62.9%) patients). There was no difference between patients with (n = 15) and without (n = 20) fixation of the transverse anterior component of the acetabular fracture (p = 0.67). Radiographic roof-arc angles measured at discharge, at three months postoperatively and at the last follow-up consultation didn't changed significantly (p > 0.05). There was no statistically significant difference between patients treated with (n = 15) and without (n = 20) fixation of the anterior component of the transverse acetabular fracture in terms of medial displacement of the femoral head.

CONCLUSION

the authors suggest that associated transverse-posterior wall acetabular fractures can be managed by a single posterior approach. Direct reduction and fixation of the posterior wall and column components is an adequate option for these injuries. If there is adequate indirect reduction of the anterior column, as checked by digital palpation and fluoroscopy, we feel that it is not necessary to fix the anterior column component of the transverse acetabular fracture.

Subaxial positional vertebral artery occlusion corrected by decompression and fusion

STUDY DESIGN

A rare case of subaxial vertebral artery (VA) positional occlusion is reviewed and treatment methods discussed.

OBJECTIVE

The decision process involved in treating subaxial VA positional occlusion is reviewed.

SUMMARY OF BACKGROUND DATA

Bow Hunter stroke is a symptomatic vertebrobasilar insufficiency caused by stenosis or occlusion of the VA with physiologic head rotation. It most commonly occurs at the junction of C1 and C2 and less commonly as the VA enters the C6 transverse foramen. Rotational stenosis of the VA is quite rare during its passage through the foramen transversarium of C3-C6.

METHODS

A 48-year-old gentleman presented describing syncopal episodes when he turns his head to the left side. Imaging revealed a congenitally narrowed right foramen transversarium and high-grade stenosis of the left VA when the head was turned to the left. A routine anterior cervical discectomy and fusion was performed with the addition of decompression of the left transverse foramen.

RESULTS

Vascular imaging should be performed with the patient's head in both the neutral position and in the symptomatic position. Surgical treatment may be chosen if conservative therapies fail and generally has 1 of 2 goals-decompression of the VA or elimination of rotational movement at the affected level. Decisions between anterior and posterior decompressions may be influenced by the surgeon's comfort level with the approach and if the transverse foramen stenosis is caused mainly by an anterior (osteophytes at the uncinate process) or posterior (facet joint hypertrophy) process. The patient remains symptom-free after treatment.

CONCLUSION

This report demonstrates the condition in the subaxial spine and describes successful treatment by fusion of the affected level combined with decompression of the foramen transversarium-a combination of previously described therapies.

Basic Science Research Related to Chiropractic Spinal Adjusting: The State of the Art and Recommendations Revisited

OBJECTIVE

The objectives of this white paper are to review and summarize the basic science literature relevant to spinal fixation (subluxation) and spinal adjusting procedures and to make specific recommendations for future research.

METHODS

PubMed, CINAHL, ICL, OSTMED, and MANTIS databases were searched by a multidisciplinary team for reports of basic science research (since 1995) related to spinal fixation (subluxation) and spinal adjusting (spinal manipulation). In addition, hand searches of the reference sections of studies judged to be important by the authors were also obtained. Each author used key words they determined to be most important to their field in designing their individual search strategy. Both animal and human studies were included in the literature searches, summaries, and recommendations for future research produced in this project.

DISCUSSION

The following topic areas were identified: anatomy, biomechanics, somatic nervous system, animal models, immune system, and human studies related to the autonomic nervous system. A relevant summary of each topic area and specific recommendations for future research in each area were the primary objectives of this project.

CONCLUSIONS

The summaries of the literature for the 6 topic sections (anatomy, biomechanics, somatic nervous system, animal models, immune system, and human studies related to the autonomic nervous system) indicated that a significant body of basic science research evaluating chiropractic spinal adjusting has been completed and published since the 1997 basic science white paper. Much more basic science research in these fields needs to be accomplished, and the recommendations at the end of each topic section should help researchers, funding agencies, and other decision makers develop specific research priorities.

[Imaging in rheumatology. Degenerative diseases of the spine]

Degeneration of the spine is a common reason for pain in the musculoskeletal system. Radiography is an important tool for diagnosis and differential diagnosis. Cost efficacy and economy of time are advantages in using conventional x-rays. Although narrowing of intervertebral disc spaces, irregular ossification of the vertebral end-plate as well as osteophytes, facet joint osteoarthritis and spondylolisthesis can be observed, early changes in the discs or the subdiscal bone can not be detected by x-rays. Moreover, 3-dimensional imaging is not possible. Computer tomography (CT) and magnetic resonance imaging (MRI) are reliable for identifying disorders of the spine and soft-tissue. Differentiation between inflammation, trauma and tumor is possible. There is still a problem with the relationship between the information obtained by x-rays or MRI and clinical symptoms. Therefore, interpretation of radiological examinations assumes a knowledge of clinical symptoms and the different kinds of diseases which are possible.

The use of a virtual three-dimensional model to evaluate the intraosseous space available for percutaneous screw fixation of acetabular fractures

We created virtual three-dimensional reconstruction models from computed tomography scans obtained from patients with acetabular fractures. Virtual cylindrical implants were placed intraosseously in the anterior column, the posterior column and across the dome of the acetabulum. The maximum diameter which was entirely contained within the bone was determined for each position of the screw. In the same model, the cross-sectional diameters of the columns were measured and compared to the maximum diameter of the corresponding virtual implant. We found that the mean maximum diameter of virtual implant accommodated by the anterior columns was 6.4 mm and that the smallest diameter of the columns was larger than the maximum diameter of the equivalent virtual implant. This study suggests that the size of the screw used for percutaneous fixation of acetabular fractures should not be based solely on the measurement of cross-sectional diameter and that virtual three-dimensional reconstructions might be useful in pre-operative planning.

Extrinsic risk factors for compromised blood flow in the vertebral artery: anatomical observations of the transverse foramina from C3 to C7

The vertebral artery (VA) is often involved in the occurrence of complications after spinal manipulative therapy. Due to osteophytes compressing the VA anteriorly from the uncinate process or posteriorly from the facet complex, the VAs are susceptible to trauma in the transverse foramina. Such altered anatomical configurations are of major clinical significance, as spinal manipulations may result in dissection of the VA with serious consequences for the blood supply to the vertebrobasilar region. The purpose of this study is to describe numerous structural features of the third to seventh cervical vertebrae in order to contribute to the understanding of pathological conditions related to the VA. The minimal and maximal diameter of 111 transverse foramina in dry cervical vertebrae were studied. The presence of osteophytes and their influence on the VA were evaluated at the vertebral body and at the superior and inferior articular facets. The diameter of the transverse foramina increased from C3 to C6, while the transverse foramina of C7 had the smallest diameter. At all levels the mean dimensions of the left foramina were greater than those of the right side. Osteophytes from the uncinate process of C5 and C6 vertebrae were found in over 60% of dry vertebrae. Osteophytes from the zygapophyseal joints were more frequent at C3 and C4 vertebrae. About half of the osteophytes of the uncinate and of the superior articular process partially covered the transverse foramina. This was less common with those of the inferior articular facets. Osteophytes covering the transverse foramen force the VAs to meander around these obstructions, causing narrowing through external compression and are potential sites of trauma to the VAs potentially even leading to dissection. We strongly advocate that screening protocols for vertebrobasilar insufficiency (VBI) be used prior to any manipulation of the cervical spine and should include not only extension and rotation but any starting position from which the planned manipulation will be performed.

Comparison of clinical and radiographic outcome in instrumented anterior cervical discectomy and fusion with or without direct uncovertebral joint decompression

BACKGROUND CONTEXT

Anterior cervical discectomy and fusion (ACDF) is an established procedure for the operative treatment of cervical disc disease in patients with radiculopathy resulting from impingement from uncovertebral joint osteophytes. Studies demonstrate that direct decompression of the lesion provides good result. However, known complications include vertebral artery injury, dural tears, nerve root injury, loss of biomechanical stability and increased operative time. Other studies suggest that disc space distraction may play an important role by indirectly decompressing neural elements. Therefore, if equivalent functional outcomes can be achieved without sacrificing the uncovertebral joint, then potential morbidity and mortality could be decreased.

PURPOSE

To assess and compare clinical and radiographic outcomes of patients with neck pain and cervical radiculopathy who underwent instrumented ACDF with or without direct uncovertebral joint decompression.

STUDY DESIGN/SETTING

Retrospective clinical chart and radiographic review to assess clinical outcome and graft fusion in 109 patients who underwent one- or two-level ACDF with rigid anterior plate fixation.

PATIENT SAMPLE

Radiographs and clinical charts for 109 patients (mean, 46 years; range, 27 to 83) who underwent ACDF with rigid anterior plate fixation were retrospectively reviewed at a single institution. Patients with radiculopathy resulting from herniated disc, spondylosis or a combination of both refractory to conservative treatment underwent surgery using a standard Smith-Robinson left-sided approach. Seventy-one patients who received direct uncovertebral joint decompression (Group 1) were compared with 38 patients without direct decompression but indirect decompression by disc space distraction (Group 2). In Group 1, 37 one-level and 34 two-level ACDFs were performed. In Group 2, 11 and 27 were one-level and two-level ACDFs, respectively. Smoking and work-related injuries involved 26.7% and 38.0% of Group 1 and 28.9% and 28.9% of Group 2, respectively. Autologous iliac crest grafts were used in 51 patients, whereas 58 patients received allograft.

OUTCOME MEASURES

Independent blinded analyses of plain lateral neutral, flexion and extension radiographs were conducted to assess fusion, evaluate graft and plate and screw integrity (mean, 12 months). Clinical outcomes were reported as excellent, good, fair or poor (mean, 23 months) based on Odom's criteria.

METHODS

Postoperative clinical outcome and radiographic studies of graft and instrument integrity were assessed in 71 patients undergoing ACDF with uncovertebral joint decompression and 38 patients without uncovertebral joint decompression, but with indirect decompression through disc space distraction.

RESULTS

Fusion occurred in 95.8% of Group 1 and 100% of Group 2. In Group 1, 26.8% of the patients reported excellent results, 57.7% reported good results, 12.7% reported fair results and 2.8% reported poor results. In Group 2, 23.7% of the patients reported excellent results, 60.5% reported good results and 15.8% reported fair results. All nonunions reported good outcomes. Postoperative respiratory distress developed in one patient and dysphagia developed in another both from Group 1. No other complications were noted. The presence or absence of direct uncovertebral joint decompression and clinical outcome was not statistically significant (p>.05). The use of graft-type, operative level, presence of smoking and work-related injury in relation to clinical outcome was not found to be significant (p>.05).

CONCLUSION

Good to excellent results were obtained in 84.5% and 84.2% of patients for Groups 1 and 2, respectively. Indirect foraminal decompression through distraction remains somewhat controversial during ACDF. However, sacrificing the uncovertebral joint can increase operative time and potentially increase complication rates. This study demonstrates that ACDF with or without direct uncovertebral joint decompression can provide good clinical results for neck pain with cervical radiculopathy. Therefore, routine direct uncovertebral joint decompression should not be undertaken during ACDF.

Rechnergest�tztes Operieren bei Beckenverletzungen

For pelvic fractures, pre- and postoperative imaging includes spiral computed tomography, providing high resolution and accuracy. In conventional pelvic operations, these image data cannot be used directly. Intraoperative imaging is limited with fluoroscopy and visualization by the approaches. One solution in terms of precision and reduction of radiation exposure could be computer-assisted surgery (CAS). This method can be divided into navigation, which requires active registration, CT based navigation and registration-free fluoroscopy-based or Iso-C-3D-based navigation. Applications for CAS in the pelvis include sacroiliac screw osteosynthesis in pelvic ring fractures, navigated periacetabular screw fixation, and correction operations for malhealed pelvic ring fractures. Nowadays, CAS is still costly and frequently requires additional staff. However, it helps to reduce complications caused by implant placement. With the introduction of new health care requirements in Germany, this may be an economic argument as well. Current developments focusing on accurate navigated reduction will provide new indications for CAS, further decrease complication rates, and help to reduce the invasiveness of pelvis operations.

Clinical importance of ligamentous and osseous structures in the cervical uncovertebral foraminal region

The vertebral artery, cervical spinal nerves, spinal nerve roots, and the bony and ligamentous tissue related to the cervical vertebrae are structures whose anatomy determines the path of a surgical approach. Defining the anatomy and, in particular, determining the precise location of vulnerable structures at the intervertebral foramen and the uncovertebral foraminal region (UVFR), a region defined by the uncinate process anteriorly, the facet joint posteriorly and the foramen transversarium laterally, has critical significance when selecting the safest surgical approach. We studied the anatomy of the vertebral artery, cervical spinal nerves, and spinal nerve roots within the UVFR in six cadaver specimens. We also obtained measurements of bony structures in 35 dry cervical vertebral columns, from C3-C7. The uncinate process (UP) projects superiorly from the posterolateral aspect of each cervical vertebral body, except for the first and second vertebrae. Because the posterior part of the UP lies adjacent to the vertebral artery, spinal nerve, and spinal nerve roots, its resection creates sufficient space to decompress these structures directly. The posterolateral surface of the UP is covered by ligamentous tissue that originates from the posterior longitudinal ligament and protects the neural and vascular structures during their decompression in the UVFR.

Differential Diagnosis and Management of Spinal Nerve Root-related Pain

Pain originating from spinal nerve roots demonstrates multiple pathogeneses. Distinctions in the patho-anatomy, biomechanics, and pathophysiology of spinal nerve roots contribute to pathology, diagnosis, and management of root-related pain. Root-related pain can emerge from the tension events in the dura mater and nerve tissue associated with primary disc related disorders. Conversely, secondary disc-related degeneration can produce compression on the nerve roots. This compression can result in chemical and mechanical consequences imposed on the nervous tissue within the spinal canal, lateral recess, intervertebral foramina, and extraforminal regions. Differences in root-related pathology can be observed between lumbar, thoracic, and cervical spinal levels, meriting the implementation of different diagnostic tools and management strategies.

Anatomic bases for anterior spinal surgery: surgical anatomy of the cervical vertebral body and disc space

Twenty adult cadaveric cervical spines were sectioned longitudinally through the midline to display longitudinal sections of the vertebral bodies and disc spaces from C3 to T1. Computer-assisted anatomic images were obtained for measurements of the disc spaces and vertebral bodies. Anteroposterior (AP) depth gradually increased from 16.56 +/- 2.21 mm at C3 to 19.32 +/- 2.30 mm at C7. Greater values of AP depth at the inferior endplate were found at C5 (20.75 +/- 2.87 mm) and C6 (20.56 +/- 2.31 mm) compared with the values at C3 (18.26 +/- 1.82 mm), C4 (19.27 +/- 2.88 mm) and C7 (19.21 +/- 3.22 mm). The AP depth at the superior endplate was greater than that at the inferior endplate. The height of the disc space was found to be lowest at the posterior disc space from C2-3 to C7-T1 (2.95 +/- 0.86 mm at C2-3, 2.78 +/- 0.93 mm at C3-4, 2.45 +/- 0.79 mm at C4-5, 2.92 +/- 0.64 mm at C5-6, 2.46 +/- 0.59 mm at C6-7, 2.93 +/- 1.05 mm at C7-T1), when compared to the height of the disc space at the anterior disc space from C2-3 to C7-T1 (4.07 +/- 0.85 mm at C2-3, 4.34 +/- 1.18 mm at C3-4, 3.95 +/- 1.37 mm at C4-5, 3.55 +/- 1.37 mm at C5-6, 3.55 +/- 0.76 mm at C6-7, 3.67 +/- 1.17 mm at C7-T1). The mid-axis of the disc space was situated at approximately 3 mm above the anterior midpoint of the annulus fibrosus at the level of the lower cervical spine. To reach the posterior portion of the disc space from the anterior midpoint of the annulus fibrosus, a 5 degrees cephalad angulation of the drill relative to the mid-axis of the disc space is necessary. All these original data from cadavers may be helpful during anterior approach for discectomy, vertebrectomy and anterior screw-plate placement.