Anatomy of the iliolumbar ligament

Anatomy and morphology of iliolumbar ligament

PURPOSE

To address limited amount of available data and contradictory statements in published works 60 Iliolumbar ligaments extracted from 30 cadavers were examined to describe their insertions and morphology.

METHODS

The ligaments were removed during the standard autopsy procedures with a use of an oscillating saw, a chisel and a scalpel. The specimens were photographed before the extraction and measured alongside their anterior margin. Next, they were preserved in formaldehyde, stripped of other soft tissues and then examined, photographed and described.

RESULTS

The mean length of the ligaments was 31.7 mm. 44 specimens were described as single-banded, 13 as double-banded and 3 as other. In 24 cases costal process of L_V has been fixed to the iliac plate by short ligamentous bands. In 38 cases there was a thick fibrous membrane connected to the ligament. No legitimate insertions on L_IV vertebra were observed.

CONCLUSIONS

Typical iliolumbar ligament consists of a single ligamentous band. Most common variability of the ligament consist of two bands. In approximately 40% of cases the costal process of L_V can be additionally stabilized to the iliac plate by short, strong ligamentous bands. In 63% of cases a connection between the iliolumbar ligament and a fibrous membrane placed in the frontal plane, superiorly to the ligament, has been observed. There seems to be no convincing proof of existence of the insertion of the iliolumbar ligament on the L_IV vertebra.

Deferent Anatomical Presentations of Iliolumbar Ligament: A Cadaveric Study

This work was carried out to describe the detailed gross anatomy of the iliolumbar ligaments in human cadavers and to shed more light on these disputes regarding the configuration and direction of these ligaments. Twenty partially dissected human formalin-preserved cadavers originating from North America and Europe were investigated in this study. Blunt dissection was made through the ventral and dorsal aspects of the pelvic area of the cadavers. According to the current study, the anterior and posterior portions of the iliolumbar ligament most frequently attached to the 5th lumbar vertebra’s transverse process (70% and 80%, respectively). The body of the 4th lumbar vertebra with the 5th lumbar vertebra’ transverse process was the attachment of the anterior part (30%). The attachment of the posterior part was the body of the 5th lumbar vertebra (20%). The anterior and posterior parts of the iliolumbar ligament were inserted into the anterior tip of the iliac crest. There is an obvious variation in the morphological appearance of the iliolumbar ligament distinguished in attachments, length, width, thickness, number of bands, and the presence of accessory bands in the anterior part of the ligament. In addition, a new attachment for the anterior band was revealed in one-third of the specimens (body of the 4th lumbar vertebra) which have not been described before. Also, in one-fifth of the specimens, there was a new attachment for the posterior band (body of the 5th lumbar vertebra).

In Silico Pelvis and Sacroiliac Joint Motion: Refining a Model of the Human Osteoligamentous Pelvis for Assessing Physiological Load Deformation Using an Inverted Validation Approach

Introduction. Computational modeling of the human pelvis using the finite elements (FE) method has become increasingly important to understand the mechanisms of load distribution under both healthy and pathologically altered conditions and to develop and assess novel treatment strategies. The number of accurate and validated FE models is however small, and given models fail resembling the physiologic joint motion in particular of the sacroiliac joint. This study is aimed at using an inverted validation approach, using in vitro load deformation data to refine an existing FE model under the same mode of load application and to parametrically assess the influence of altered morphology and mechanical data on the kinematics of the model. Materials and Methods. An osteoligamentous FE model of the pelvis including the fifth lumbar vertebra was used, with highly accurate representations of ligament orientations. Material properties were altered parametrically for bone, cartilage, and ligaments, followed by changes in bone geometry (solid versus 3 and 2 mm shell) and material models (linear elastic, viscoelastic, and hyperelastic isotropic), and the effects of varying ligament fiber orientations were assessed. Results. Elastic modulus changes were more decisive in both linear elastic and viscoelastic bone, cartilage, and ligaments models, especially if shell geometries were used for the pelvic bones. Viscoelastic material properties gave more realistic results. Surprisingly little change was observed as a consequence of altering SIJ ligament orientations. Validation with in vitro experiments using cadavers showed close correlations for movements especially for 3 mm shell viscoelastic model. Discussion. This study has used an inverted validation approach to refine an existing FE model, to give realistic and accurate load deformation data of the osteoligamentous pelvis and showed which variation in the outcomes of the models are attributed to altered material properties and models. The given approach furthermore shows the value of accurate validation and of using the validation data to fine tune FE models.

In-silico pelvis and sacroiliac joint motion-A review on published research using numerical analyses

BACKGROUND

Computational models of the human pelvis have become highly useful tools to assess mechanisms of injury, diagnostics and treatment options. The purpose of this systematic literature review was to summarize existing pelvic computer models, to assess their comparability and the measures taken for experimental validation.

METHODS

Research on virtual simulations of the posterior pelvis and sacroiliac joint available from the ISI Web of Knowledge, PubMed and Scopus databases available until January 2018 were included.

FINDINGS

From a total of 3938 articles, 33 studies matched the criteria. Thirteen studies reported on experimental biomechanics, of which seven were parametric. Thirteen studies focused on pelvic injury and surgery, three were clinical case reports. One study assessed the effects of lumbar surgery on the sacroiliac joint, three studies on diagnostics and the non-surgical treatment of the sacroiliac joint. The mode of load application, geometry, material laws and boundary conditions varied vastly between the studies. The majority excluded the lumbosacral transition as part of pelvic biomechanics, and used isotropic linear elastic material properties. Outcomes of the analyses were reported inconsistently with negative impact on their comparability, and validation was commonly conducted by literature with varying agreement of the loading conditions.

INTERPRETATION

Comparability and validation are two major issues of present computational biomechanics of the pelvis. These issues diminish the transferability of the in-silico findings into real-life scenarios. In-vitro cadaveric models remain the realistic standard to account for the present computational analyses which simplify the complex nature of musculoskeletal tissues of the pelvis.

A Quantitative Exposure Planning Tool for Surgical Approaches to the Sacroiliac Joint

OBJECTIVES

To aid in surgical planning by quantifying and comparing the osseous exposure between the anterior and posterior approaches to the sacroiliac joint.

METHODS

Anterior and posterior approaches were performed on 12 sacroiliac joints in 6 fresh-frozen torsos. Visual and palpable access to relevant surgical landmarks was recorded. Calibrated digital photographs were taken of each approach and analyzed using Image J.

RESULTS

The average surface areas of exposed bone were 44 and 33 cm for the anterior and posterior approaches, respectively. The anterior iliolumbar ligament footprint could be visualized in all anterior approaches, whereas the posterior aspect could be visualized in all but one posterior approach. The anterior approach provided visual and palpable access to the anterior superior edge of the sacroiliac joint in all specimens, the posterior superior edge in 75% of specimens, and the inferior margin in 25% and 50% of specimens, respectively. The inferior sacroiliac joint was easily visualized and palpated in all posterior approaches, although access to the anterior and posterior superior edges was more limited. The anterior S1 neuroforamen was not visualized with either approach and was more consistently palpated when going posterior (33% vs. 92%).

CONCLUSIONS

Both anterior and posterior approaches can be used for open reduction of pure sacroiliac dislocations, each with specific areas for assessing reduction. In light of current plate dimensions, fractures more than 2.5 cm lateral to the anterior iliolumbar ligament footprint are amenable to anterior plate fixation, whereas those more medial may be better addressed through a posterior approach.

The Surgical Anatomy of the Lumbosacroiliac Triangle: A Cadaveric Study

OBJECTIVE

The anatomic area delineated medially by the lateral part of the L4-L5 vertebral bodies, distally by the anterior-superior surface of the sacral wing, and laterally by an imaginary line joining the base of the L4 transverse process to the proximal part of the sacroiliac joint, is of particular interest to spine surgeons. We are referring to this area as the lumbo-sacro-iliac triangle (LSIT). Knowledge of LSIT anatomy is necessary during approaches for L5 vertebral and sacral fractures, sacral and iliac tumors, and extraforaminal decompression of the L5 nerve roots.

METHODS

We performed an anatomic dissection of the LSIT in 3 embalmed cadavers (6 triangles), using an anterior and posterior approach.

RESULTS

We identified 3 key tissue planes: the neurological plexus plane, constituted by L4 and L5 nerve roots; an intermediate level constituted by the ileosacral tunnel; and posteriorly, by the lumbosacral ligament, and the posterior muscular plane.

CONCLUSIONS

Improving anatomic knowledge of the LSIT may help surgeons decrease the risk of possible complications. When LSIT pathology is present, a lateral approach corresponding to the tip of the L4 transverse process, medially, is suggested to decrease the risk of vessel and nerve root damage.

The molecular composition of the extracellular matrix of the human iliolumbar ligament

BACKGROUND CONTEXT

The human iliolumbar ligament connects the transverse process of L5 to the iliac crest and contributes to lumbosacral stability and has been associated with low back pain. However, different opinions exist regarding the functional relevance of the ligament.

PURPOSE

In the present study, we analyze the regional molecular composition of the ligament extracellular matrix.

STUDY DESIGN

Special attention is given to the attachment sites, to determine whether the ligament is subjected to a certain mechanical environment.

METHODS

Iliolumbar ligament samples, extending from one enthesis to the other, were removed from 11 cadavers and fixed in methanol. Cryosections were immunolabeled with a panel of antibodies directed against collagens, glycosaminoglycans, proteoglycans, matrix proteins, and neurofilament.

RESULTS

The mid-substance of the ligament labeled for all the molecules normally found in dense fibrous connective tissue including types I, III, and VI collagen, versican, dermatan -, chondroitin 4 -, and keratan sulfate. However, both entheses were fibrocartilaginous and labeled for type II collagen, aggrecan, and chondroitin 6- sulfate. A common feature was fat between the fiber bundles near the entheses. Occasionally this fat contained nerve fibers.

CONCLUSIONS

The existence of fibrocartilaginous entheses suggests that the insertion sites of the ligament are subject to both tensile and compressive loading-probably because of insertional angle changes between ligament and bone during loading. Our findings support the suggestion that the iliolumbar ligament might play an important role in the stabilization of the lumbosacral junction.

The extent of ligament injury and its influence on pelvic stability following type II anteroposterior compression pelvic injuries--A computer study to gain insight into open book trauma

Surgical stabilization of the pelvis following type II anteroposterior compression pelvic injuries (APCII) is based on the assumption that the anterior sacroiliac, sacrospinous, and sacrotuberous ligaments disrupt simultaneously. Recent data on the ligaments contradict this concept. We aimed at determining the mechanisms of ligament failure in APCII computationally. In an individual osteoligamentous computer model of the pelvis, ligament load, and strain were observed for the two-leg stance, APCII with 100-mm symphyseal widening and for two-leg stance with APCII-related ligament failure, and validated with body donors. The anterior sacroiliac and sacrotuberous ligaments had the greatest load with 80% and 17% of the total load, respectively. APCII causes partial failure of the anterior sacroiliac ligament and the pelvis to become horizontally instable. The other ligaments remained intact. The sacrospinous ligament was negligibly loaded but stabilized the pelvis vertically. The interosseous sacroiliac and sacrotuberous ligaments are likely responsible for reducing the symphysis and might serve as an indicator of vertical stability. The sacrospinous ligament appears to be of minor significance in APCII but plays an important role in vertical stabilization. Further research is necessary to determine the influence of alterations in ligament and bone material properties.

Is the iliolumbar ligament a reliable identifier of the L5 vertebra in lumbosacral transitional anomalies?

OBJECTIVE

Sufficiently sized studies to determine the value of the iliolumbar ligament (ILL) as an identifier of the L5 vertebra in cases of a lumbosacral transitional vertebra (LSTV) are lacking.

METHODS

Seventy-one of 770 patients with LSTV (case group) and 62 of 611 subjects without LSTV with confirmed L5 level were included. Two independent radiologists using coronal MR images documented the level(s) of origin of the ILL. The interobserver agreement was analysed using weighted kappa/kappa (wκ/κ) and a Fischer's exact test to assess the value of the ILL as an identifier of the L5 vertebra.

RESULTS

The ILL identified the L5 vertebra by originating solely from L5 in 95 % of the controls; additional origins were observed in 5 %. In the case group, the ILL was able to identify the L5 vertebra by originating solely from L5 in 25-38 %. Partial origin from L5, including origins from other vertebra was observed in 39-59 % and no origin from L5 at all in 15-23 % (wκ = 0.69). Both readers agreed that an ILL was always present and its origin always involved the last lumbar vertebra.

CONCLUSION

The level of the origin of the ILL is unreliable for identification of the L5 vertebra in the setting of an LSTV or segmentation anomalies.

KEY POINTS

• The origin of the ILL is evaluated in subjects with an LSTV. • The origin of the ILL is anatomically highly variable in LSTV. • The ILL is not a reliable landmark of the L5 vertebra in LSTV.

A new classification for complex lumbosacral injuries

BACKGROUND CONTEXT

The optimal classification and treatment algorithm for complex lumbosacral injuries, in particular high-energy sacral fractures and lumbosacral dissociation (LSD) injuries, remains controversial. Currently used classification systems are largely descriptive, lacking validity, reproducibility, treatment considerations, and prognostic information.

PURPOSE

We set out to develop a comprehensive, yet practical, classification system for complex lumbosacral injuries that assists in clinical decision making.

STUDY DESIGN

We developed a new classification system for complex lumbosacral injuries derived through literature review, expert opinion, and our clinical experience treating combat casualties over the past 10 years. We have seen an increased incidence of complex sacral fractures and LSD injuries after high-energy blast trauma, motor vehicle collisions, and aircraft crashes.

METHODS

We performed an extensive literature review and discussed the proposed classification with spinal trauma surgeons from a variety of institutions familiar with the treatment of complex high-energy sacral fractures and LSD injuries. We identified the significant clinical and radiographic variables encountered in the decision-making process for the treatment of complex lumbosacral injuries. Existing classification systems were reviewed in light of these essential characteristics, and their limitations were defined and addressed with the new system.

RESULTS

A new classification system called lumbosacral injury classification system (LSICS) was devised based on three injury characteristics: injury morphology, posterior ligamentous complex integrity, and neurologic status. A composite injury severity score was calculated by summing a weighted score from each category, allowing patients to be stratified into surgical and nonsurgical treatment groups based on threshold values. Modifiers to determining appropriate selection for operative treatment include systemic injury load and physiological status of the polytraumatized patient, soft-tissue status, and expected time to mobility. Finally, an algorithm was developed to determine the optimum operative technique based on the previously outlined injury characteristics.

CONCLUSIONS

The LSICS provides a comprehensive and practical approach for evaluating injury severity and guiding clinical decision making. This system provides common language for surgeons to communicate various injury patterns and formulate treatment modalities. Further studies are necessary to determine the reliability and validity of this new classification system.

Description of the iliolumbar ligament for computer-assisted reconstruction

STUDY DESIGN

The iliolumbar ligament (IL) was examined using morphometric and virtual methods.

OBJECTIVES

A macroscopic study was performed to measure the anterior (AIL) and the posterior part of the IL (PIL).

SUMMARY OF BACKGROUND DATA

Though being a widely accepted cause of low back pain and lumbosacral instability, the IL is neglected in computer-based biomechanical studies due to the lack of morphometric information.

METHODS

Frozen sections prepared from 29 human subjects were measured and 7-tesla MR images made to distinguish the AIL and PIL. Cuboids were designated as geometric figures to both parts of the ligament, allowing computer-based calculations of length, surface, volume and angle of positional relationships.

RESULTS

Based on 7-tesla MR imaging, virtual reconstruction was conducted for one male pelvis, including the IL. While left- and right-side parameters varied at a statistically significant level, no gender-dependencies could be determined. Lengths of 30 and 25 mm were measured for the AIL and PIL, as well as heights of 17-19 mm, respectively, and a thickness of 4mm.

CONCLUSIONS

Correlations between the side-dependent parameters and the AIL and the PIL of the same side indicate close functional relationships. Additional dependencies suggest that the IL is capable of compensating age-related as well as bone-attributed alterations in lumbosacral morphology. The IL data and the visualised ligament structures contribute to determination of the influence of the IL in spinal and sacroiliac stability by means of computer-assisted biomechanics.

Immunohistochemical demonstration of nerve endings in iliolumbar ligament

STUDY DESIGN

Immunohistochemical study on fresh cadaver specimens.

OBJECTIVE

Assessment of mechanoreceptor and nociceptor levels and distribution in iliolumbar ligament.

SUMMARY AND BACKGROUND DATA

The function of iliolumbar ligament and its role in low back pain has not been yet fully clarified. Understanding the innervation of this ligament should provide a ground which enables formation of stronger hypotheses.

METHODS

Bilateral 30 iliolumbar ligaments of 15 fresh cadavers were included in the study. Morphologic properties were recorded and the ligaments were examined by focusing on 3 main parts: ligament, bone insertions, and tendon body. Assessment of mechanoreceptor and nociceptor levels and their distribution in iliolumbar ligament were performed on the basis of immunohistochemistry using the S-100 antibody specific for nerve tissue.

RESULTS

Iliac wing insertion was found to be the richest region of the ligament in terms of mechanoreceptors and nociceptors. Pacinian (type II) mechanoreceptor was determined to be the most common (66.67%) receptor followed by Ruffini (type I) (19.67%) mechanoreceptor, whereas free nerve endings (type IV) and Golgi tendon organs (type III) were found to be less common, 10.83% and 2.83%, respectively.

CONCLUSION

Immunohistochemical staining has shown that iliolumbar ligament had a rich nerve tissue. Those results indicate that ILL plays an important role in proprioceptive coordination of lumbosacral region alongside its known biomechanic support function. Moreover, the presence of type IV nerve endings suggest that the injury of this ligament might contribute to the low back pain.

Effects of slouching and muscle contraction on the strain of the iliolumbar ligament

The study consisted of biomechanical modelling and in vitro experiments. The objective of the study was to find a mechanical cause of acute low back pain (LBP) in everyday situations. The precise mechanism producing LBP is still under discussion. Most biomechanical studies link the concepts of stooped postures and buckling instability of the spine under high compressive load. No biomechanical model addresses situations with small or neglectable compressive spinal load. The proposed conceptual model describes strain on the iliolumbar ligaments (ILs) when slouching from standing upright. Delayed or absent recruitment of back muscles that protect against hyperkyphosis of the lumbar spine is a conditional factor. Erector spinae and multifidus muscle forces are included, representing a bifurcation in back muscle force: one part acting on the iliac bones and one part acting on the sacrum. The multifidus muscle action on the sacrum may produce nutation which can be counteracted by pelvic floor muscles, which would link back problems and pelvic floor problems. The effect of simulated muscle tension on the ILs and the L5-S1 intervertebral disc angle was measured using embalmed specimens. Forces were applied to simulate erector spinae and sacral part of multifidus tension, bilateral up to 100 N each. Strain gauge sensors registered elongation of the ILs. Explorative biomechanical model calculations show that dynamic slouching, driven by upper body weight and (as an example) rectus abdominis muscle force may produce failure load of the spinal column and the ILs. The quasi-static test on embalmed specimens showed a significant increase of IL elongation with simulated rectus abdominis muscle force. Adding erector spinae or multifidus muscle tension eased the ILs. Sudden slouching of the upright trunk may create failure risk for the spine and ILs. This loading mode may be prevented by controlling loss of lumbar lordosis with erector spinae and multifidus muscle force.

Soft tissue determinants of low back pain

Low back pain is one of the complaints most commonly seen in the clinical setting. Correctly or incorrectly, these patients are often given the diagnosis of fibromyalgia, myofascial pain syndrome, disk herniation, or some other label. It is important to recognize the soft tissue causes of low back pain and understand how they can be most appropriately diagnosed and managed. Nonligamentous disorders of the low back region may occur in isolation or in combination with underlying discogenic, ligamentous, and facet-mediated causes of pain. Therefore, in order to fully evaluate and treat a patient with low back pain, it is necessary to consider and address these soft tissue conditions. This paper reviews soft tissue causes of low back pain and discusses how they are most appropriately diagnosed and managed.

Provocative sacroiliac joint maneuvers and sacroiliac joint block are unreliable for diagnosing sacroiliac joint pain

Mapping studies of pain elicited by injections into the sacroiliac joints (SIJs) suggest that sacroiliac joint syndrome (SIJS) may manifest as low back pain, sciatica, or trochanteric pain. Neither patient-reported symptoms nor provocative SIJ maneuvers are sensitive or specific for SIJS when SIJ block is used as the diagnostic gold standard. This has led to increasing diagnostic use of SIJ block, a procedure in which an anesthetic is injected into the joint under arthrographic guidance. However, several arguments cast doubt on the validity of SIJ block as a diagnostic gold standard. Thus, the effects of two consecutive blocks are identical in only 60% of cases, and the anesthetic diffuses out of the joint in 61% of cases, often coming into contact with the sheaths of the adjacent nerve trunks or roots, including the lumbosacral trunk (which may contribute to pain in the groin or thigh) and the L5 and S1 nerve roots. These data partly explain the limited specificity of SIJ block for the diagnosis of SIJS and the discordance between the pain elicited by the arthrography injection and the response to the block. The limitations of provocative maneuvers and SIJ blocks may stem in part from a contribution of extraarticular ligaments to the genesis of pain believed to originate within the SIJs. These ligaments include the expansion of the iliolumbar ligaments, the dorsal and ventral sacroiliac ligaments, the sacrospinous ligaments, and the sacrotuberous ligaments (sacroiliac joint lato-sensu). They play a role in locking or in allowing motion of the SIJs. Glucocorticoids may diffuse better than anesthetics within these ligaments. Furthermore, joint fusion may result in ligament unloading.

Intervertebral disc degeneration associated with lumbosacral transitional vertebrae

We studied 52 patients, each with a lumbosacral transitional vertebra. Using MRI we found that the lumbar discs immediately above the transitional vertebra were significantly more degenerative and those between the transitional vertebrae and the sacrum were significantly less degenerative compared with discs at other levels. We also performed an anatomical study using 70 cadavers. We found that the iliolumbar ligament at the level immediately above the transitional vertebra was thinner and weaker than it was in cadavers without a lumbosacral transitional vertebra.

Instability of the vertebral segment above the transitional vertebra because of a weak iliolumbar ligament could lead to subsequent disc degeneration which may occur earlier than at other disc levels. Some stability between the transitional vertebra and the sacrum could be preserved by the formation of either an articulation or by bony union between the vertebra and the sacrum through its transverse process. This may protect the disc from further degeneration in the long term.

The influence of slouching and lumbar support on iliolumbar ligaments, intervertebral discs and sacroiliac joints

OBJECTIVE

To investigate lumbopelvic kinematics when moving into a slouch.

DESIGN

A biomechanical model was developed. Load tests in vitro verified the model.

BACKGROUND

The precise mechanism causing disc herniation and back sprain is still debated. Most biomechanical studies have focused on lifting in a stooped posture. Previous studies address instability situations due to Euler buckling of the spine under axial load. However, no studies address lumbosacral, iliolumbar and sacroiliac kinematics in slouching, i.e. flexing the spine in situations with negligible compressive spinal load.

METHODS

Modeling started with the click-clack movement, i.e. the transition from lumbar lordosis to lumbar kyphosis by the combination of backward rotation of the pelvis and ventral flexion of the spine. The flexed spine was compared with a crowbar which uses the iliolumbar ligaments as fulcrum and pivot. To analyse the click-clack movement in sitting, unembalmed erect human trunks were moved from a forward position to a backward position, recording angular changes between L5, sacrum and ilium.

RESULTS

When moving the trunk stepwise backward with support at shoulder level, L5 showed forward rotation with respect to the sacrum, but rotation of the sacrum with respect to the iliac bones was reversed (i.e. counternutation). L5 showed displacement in ventral direction with respect to the ilium. Measurements were in agreement with prediction from the crowbar model of the spine.

CONCLUSIONS

Backward rotation of the pelvis combined with flexion of the spine, i.e. slouching, results in backward rotation of the sacrum with respect to the ilium, dorsal widening of the intervertebral disc L5-S1 and strain on the iliolumbar ligaments when protection from back muscles against lumbar flexion is absent. Lumbar backrest support almost eliminates lumbosacral and sacroiliac movement.

RELEVANCE

Understanding why the iliolumbar ligaments are loaded in slouching contributes to the understanding of the biomechanics of low back pain in everyday situations with small or negligible compressive spinal load. The results recommend lumbar support: backrests with free shoulder space.

Does the morphology of the iliolumbar ligament affect lumbosacral disc degeneration?

STUDY DESIGN

An anatomic study of the iliolumbar ligament was performed in association with lumbosacral disc degeneration.

OBJECTIVES

To determine whether the morphology of the iliolumbar ligament contributes to lumbosacral disc degeneration.

SUMMARY OF BACKGROUND DATA

There have been few reports concerning the clinical significance of the iliolumbar ligament.

METHODS

We dissected 25 male and 27 female cadavers and measured the length and cross-sectional area of the anterior and posterior bands of the iliolumbar ligament. The specimens were classified into three groups based on the grade of L4-L5 and L5-S1 disc degeneration: the L4-L5 disc was more degenerated than the L5-S1 disc (group L), the L4-L5 disc was less degenerated than the L5-S1 disc (group S), and both discs were equally degenerated (group E). The results were statistically compared among the three groups.

RESULTS

The length of the posterior bands and the summation of the length of the anterior and posterior bands were significantly shorter in group L than in group S, and the cross-sectional area of the posterior bands and the summation of the cross-sectional area of the anterior and posterior bands were significantly larger in group L than in groups S or E in the male cadaver specimens.

CONCLUSION

If the iliolumbar ligaments (especially the posterior band of the ligament) of a male patient are short and have a large cross-sectional area, the lumbosacral junction can be stabilized by the ligaments, with the L5-S1 disc being protected from degeneration. The L4-L5 disc may be prone to degeneration.