Angular malalignment after intramedullary nailing of femoral shaft fractures

External fixator versus elastic stable intramedullary nail for treatment of metaphyseal-diaphyseal junction fractures of the pediatric distal femur: a case-control study

BACKGROUND

Several methods have been used for the treatment of pediatric distal femoral fractures, such as elastic stable intramedullary nail (ESIN), external fixator (EF) and plate osteosynthesis, but there has been no consensus about the optimal method. The purpose of this study was to compare the clinical outcome between EF and ESIN techniques used in metaphyseal-diaphyseal junction (MDJ) fractures of the pediatric distal femur.

METHODS

We retrospectively analyzed operatively treated MDJ fractures of pediatric distal femur between January 2015 and January 2022. Patient charts were reviewed for demographics, injury and data of radiography. All of the patients were divided into EF and ESIN groups according to the operation techniques. Malalignment was defined as more than 5 degrees of angular deformity in either plane. Clinical outcomes were measured by Flynn scoring system.

RESULTS

Thirty-eight patients were included in this study, among which, 23 were treated with EF, and 15 with ESIN. The mean follow-up time was 18 months (12-24 months). At the final follow-up, all of the fractures were healed. Although there were no statistical differences between the two groups in demographic data, length of stay, estimated blood loss (EBL), rate of open reduction, time to fracture healing and Flynn score, the EF was superior to ESIN in operative time, fluoroscopic exposure and time to partial weight-bearing. The EF group had a significantly higher rate of skin irritation, while the ESIN had a significantly higher rate of malalignment.

CONCLUSION

EF and ESIN are both effective methods in the treatment of MDJ fractures of the pediatric distal femur. ESIN is associated with lower rates of skin irritation. However, EF technique has the advantages of shorter operative time, reduced fluoroscopic exposure, and shorter time to partial weight-bearing, as well as lower incidence of malalignment.

LEVEL OF EVIDENCE

Level III.

Biomechanical effects of muscle loading on early healing of femoral stem fractures: a combined musculoskeletal dynamics and finite element approach

Femoral stem fractures (FST) are often accompanied by muscle injuries, however, what muscle injuries affect fracture healing and to what extent is unknown. The purpose of this study was to analyze the extent to which different muscles affect FST healing through a combined musculoskeletal dynamics and finite element approach. Modeling the lower extremity musculoskeletal system for 12 different muscle comprehensives. Muscle and joint reaction forces on the femur were calculated and these data were used as boundary conditions input to the FSTs model to predict the degree of muscle influence on fracture healing. Finally, we will investigate the extent to which muscle influences FST healing during knee flexion. Muscle and joint forces are highly dependent on joint motion and have a significant biomechanical influence on interfragmentary strain (IFS) healing. The psoas major (PM), gastrocnemius lateralis (GL) and gastrocnemius medialis (GM) muscles play a major role in standing, with GM > PM > GL, whereas the gluteus medius posterior (GMP), vastus intermedius (VI), vastus medialis (VM), vastus lateralis superior (VLS), and adductor magnus distalis (AMD) muscles play a major role in knee flexion, with VLS > VM > VI > AMD > GMP. Mechanical stimulus-controlled healing can be facilitated when the knee joint is flexed less than 20°. Different muscles exert varying degrees of influence on the healing of fractures. Therefore, comprehending the impact of particular muscles on fracture site tissue FST healing can aid orthopedic surgeons in formulating improved surgical and rehabilitation strategies.

Radiographic outcomes and non-union factor analysis in fragmentary segmental femoral shaft fractures (AO/OTA 32C3) treated with reamed antegrade nailing

This study retrospectively assessed radiographic outcomes and risk factors associated with non-union in femoral shaft fragmentary segmental fractures (AO/OTA 32C3) treated with reamed antegrade intra-medullary nailing. Radiological outcomes, including union and alignment, were evaluated. The risk factors for non-union were investigated, including demographics and treatment-related characteristics, such as the number of interlocking screws, segmentation length, main third fragment length, distance of the main third fragment, width ratio and exposed nail length in one cortex from immediate post-operative radiographs. Multivariate logistic regression was used for statistical analysis. Among 2295 femoral shaft fracture patients from three level-1 trauma centers, 51 met the inclusion criteria. The radiological union was achieved in 37 patients (73%) with a mean union time of 10.7 ± 4.8 months. The acceptable axial alignment was observed in 30 patients (59%). Multiple logistic regression analysis identified only exposed nail length as a significant risk factor for non-union (odds ratio: 1.599, p = 0.003) and the cut-off value was 19.1 mm (sensitivity, 0.786; specificity, 0.811). The study revealed high rates of non-union (27%) and malalignment (41%). Therefore, patients who underwent intramedullary nailing with an exposed nail length greater than 19.1 mm or about twice the nail diameter should be cautioned of the potential non-union.

Efficacy of Minimally Invasive Reduction With Cerclage Fixation in Spiral or Oblique Subtrochanteric Femoral Fractures: A Retrospective Cohort Study Comparing Cables and Wires

OBJECTIVES

To compare the outcomes of a minimally invasive reduction (MIR) technique using a cable and wire in spiral or oblique subtrochanteric femoral fractures (SFFs).

METHODS

DESIGN

Retrospective cohort study.

SETTING

Two University Hospitals.

PATIENT SELECTION CRITERIA

Skeletally mature patients with spiral or oblique SFFs (OTA/AO 32A1 and 32A2) treated with intramedullary nailing and MIR with a cerclage wire passer using either a single-loop cable or cerclage wire or MIR without cable or wire between May 2016 and November 2021 were included.

OUTCOME MEASURES AND COMPARISONS

Coronal and sagittal interfragmentary gap, neck-shaft angle, coronal and sagittal angulation, fracture union, time to union, and Radiographic Union Score for Hip (RUSH) at 6 months post operation were compared.

RESULTS

A total of 46 patients were included, with 16 each in the cable and wire groups and 14 in the non-wiring group. There were no differences in demographics ( P > 0.05), fracture classification ( P = 0.710), or operative data ( P > 0.05) between the three groups. The cable group showed significantly better coronal ( P = 0.003) and sagittal ( P = 0.003) interfragmentary gap, shorter union time ( P < 0.001), and higher 6-month RUSH score ( P < 0.001) among the three groups. There were no significant differences in outcome measures between the wire and non-wiring groups (all P > 0.05). No mechanical complications or reoperations were observed in all three groups.

CONCLUSIONS

Minimally invasive reduction using a cable is more effective than wire or non-wiring reduction to improve reduction quality and promote bone union in the SFFs.

LEVEL OF EVIDENCE

Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

Retrograde intramedullary nailing of the femur: identifying the true anatomic axis for the ideal start point

PURPOSE

Retrograde femoral intramedullary nailing (IMN) is commonly used to treat distal femur fractures. There is variability in the literature regarding the ideal starting point for retrograde femoral IMN in the coronal plane. The objective of this study was to identify the ideal starting point, based on radiographs, relative to the intercondylar notch in the placement of a retrograde femoral IMN.

METHODS

A consecutive series of 48 patients with anteroposterior long-leg radiographs prior to elective knee arthroplasty from 2017 to 2021 were used to determine the femoral anatomic axis. The anatomic center of the isthmus was identified and marked. Another point 3 cm distal from the isthmus was marked in the center of the femoral canal. A line was drawn connecting the points and extended longitudinally through the distal femur. The distance from the center of the intercondylar notch to the point where the anatomic axis of the femur intersected the distal femur was measured.

RESULTS

On radiographic review, the distance from the intercondylar notch to where the femoral anatomic axis intersects the distal femur was normally distributed with an average distance of 4.1 mm (SD, 1.7 mm) medial to the intercondylar notch.

CONCLUSION

The ideal start point, based on radiographs, for retrograde femoral intramedullary nailing is approximately 4.1 mm medial to the intercondylar notch. Medialization of the starting point for retrograde intramedullary nailing in the coronal plane aligns with the anatomic axis. These results support the integration of templating into preoperative planning prior to retrograde IMN of the femur, with the knowledge that, on average, the ideal start point will be slightly medial. Further investigation via anatomic studies is required to determine whether a medial start point is safe and efficacious in patients with distal femur fractures treated with retrograde IMNs.

Intramedullary nail fixation assisted by locking plate for complex subtrochanteric femur fractures: A retrospective study

BACKGROUND

This study aims to compare therapeutic effects of two methods in complicated subtrochanteric femur fractures surgery: intramedullary nail fixation assisted with lateral monocortical locking plate versus intramedullary nail fixation assisted with supplementary cables.

METHODS

From June 2015 to June 2020, seventy-seven patients with complex subtrochanteric fractures (i.e., Seinsheimer's classification type IV or V) were included in this study. Thirty-six patients (plate group) were operated using the intramedullary nail fixation assisted by lateral monocortical locking plate, and forty-one patients (cable group) were using the intramedullary nail fixation assisted by cables. The clinical information and demographic results were collected and compared.

RESULTS

Operation time of plate group was shorter than cable group and the Incisions length of plate group was longer. The fluoroscopy times were 22.8 ± 8.2 in plate group and 33.0 ± 9.0 in cable group (p < 0.01). Compared with the cable group, patients in plate group used less cerclage cables (p < 0.01). Patients in the plate group has less medial cortex displacement compared with the cable group. (p = 0.038). As for the angular difference of neck shaft angle between operated hip and uninjured hip, plate group has less difference compared with the cable group. Time to union was 14.2 ± 3.1 weeks in plate group which is shorter than the cable group (17.9 ± 4.8 weeks). In terms of follow up period, number of malunion, Harris hip score, walking ability and traumatic hip rating scale, no significant differences were detected.

CONCLUSIONS

Our results suggest that using lateral monocortical plate as an auxiliary way may have a longer surgical incision and more intraoperative blood loss, however, the operation time is shorter, the fluoroscopy times is less, and the time to union is shorter. Intramedullary nail fixation assisted by lateral monocortical locking plate may be a new option for patients with complex subtrochanteric femur fractures.

Retrograde Nailing for Extremely Proximal Fractures of the Femoral Shaft

OBJECTIVES

To report the results of retrograde intramedullary nailing (RIMN) for the treatment of extremely proximal femur fractures.

DESIGN

Retrospective cohort study.

SETTING

Level I trauma center.

PATIENTS/PARTICIPANTS

63 patients with femoral shaft fractures involving the anatomic region within 10 centimeters of the inferior border of the lesser trochanter, which were treated with retrograde intramedullary nailing.

INTERVENTION

Retrograde intramedullary femoral nail.

MAIN OUTCOME MEASUREMENTS

Time to union, nonunion, malunion, and unplanned reoperation.

RESULTS

Between 2009 and 2020, 63 fractures were followed up to fracture union, reoperation, or a minimum of 1 year clinically. The mean follow-up was 32 months, and 48 (76%) of the patients were followed up beyond 1 year clinically. The mean patient age was 34 years (range 18-84 years), and the mean BMI was 27 (range 14-45) kg/m 2 . Forty (64%) patients were polytraumatized. Clinical and radiographic union was achieved in 59 (94%) fractures after index operation at a mean time to union of 22 weeks (range 9-51 weeks). Delayed union requiring nail dynamization occurred in 1 (2%) instance. Malreduction was noted in 1 (2%) patient with a 12-degree flexion deformity that resulted in nonunion. In total, there were 3 (5%) nonunions requiring revision surgery, 1 treated with retrograde exchange nailing and 2 revised to cephalomedullary nails; all were united after revision.

CONCLUSIONS

Retrograde intramedullary nailing can be an effective treatment strategy for extremely proximal femur fractures when necessary. Our series demonstrated a high rate of union and a low rate of malalignment and complications.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Outcomes of Angular Stable Locking System in Femoral Diaphyseal Fractures of Elderly Patients: A Multicenter Comparative Study

Background

The angular stable locking system (ASLS) was developed to provide additional stability to the distal interlocking screw of the intramedullary (IM) nail. Effects of ASLS on the treatment of femoral diaphyseal fractures in the elderly remain unknown. The aim of this study was to compare radiological outcomes of IM nailing using ASLS screws to IM nails with conventional interlocking screws in elderly patients with femoral shaft fractures.

Methods

A multicenter retrospective review of 129 patients (average age, 73.5 years; 98 women and 31 men) aged 65 years or older who underwent IM nail fixation for femoral diaphyseal fractures (AO/Orthopaedic Trauma Association [OTA] classification 32) was conducted. Demographic information of patients, fracture site (subtrochanteric or shaft), fracture type (traumatic or atypical), and AO/OTA fracture classification were investigated. Reduction status was evaluated by postoperative plain radiography. Presence of union and time to union were evaluated through serial plain radiograph follow-up. Reoperation due to nonunion or implant failure was also evaluated.

Results

ASLS was used in 65 patients (50.3%). A total of 118 patients (91.5%) achieved union without additional surgery and the mean union time was 31.8 ± 13.0 weeks. In terms of reduction status, angulation was greater in the group using ASLS. There were no statistically significant differences of union rate, time to union, and reoperation rate according to the use of ASLS (p > 0.05). There was no difference in the outcomes according to the use of ASLS even when the analysis was divided in terms of fracture site or fracture type (p > 0.05). In further subgroup analysis, only the traumatic subtrochanteric area group showed statistically significantly shorter time to union when ASLS was used (p = 0.038).

Conclusions

In geriatric patients with femoral diaphyseal fractures, the use of ASLS was not considered to have a significant effect on fracture healing. Fracture healing seemed to be more affected by surgical techniques such as minimizing the gap and fracture characteristics such as atypical femoral fractures, rather than implants.

Acute Correction of Femoral Malrotation After Intramedullary Nailing Using an Intraoperative Digital Protractor

OBJECTIVE

 The goal of the study is to diagnose and accurately correct malrotation of femur fractures after intramedullary (IM) nailing.

MATERIALS AND METHODS

An institutional review board (IRB) approved prospective study that was performed at a U.S. level 1 trauma center. After IM nailing of comminuted femur fractures, a computed tomography (CT) scanogram was routinely performed to detect the difference in the postoperative femoral version. Patients with malalignment greater than 15 degrees compared to the contralateral side were informed about the discrepancy and offered to have it acutely corrected. A four-pin technique was used: two Schanz pins were used for measuring angles and two different pins were used to turn and correct the malalignment. The pin in the distal fragment is placed directly under the nail to prevent shortening in comminuted fractures. The nail was unlocked either proximally for retrograde nails or distally for antegrade nails. The Bonesetter Angle application was used as a digital protractor to intraoperatively measure the two reference pins and correct the malrotation. Alternate holes were used for relocking the nail. All patients received a CT scanogram after correction.

RESULTS

 19/128 patients with comminuted femoral fractures over five years with malrotations between 18 and 47 degrees were included in the study with an average malrotation of 24.7 + 8 degrees. All patients were corrected to an average of 4.0 +/- 2.1 degrees difference, as compared to the contralateral side (range 0-8). No patients required further surgeries to correct malrotation.

CONCLUSION

 Comminuted fractures with malrotation >15 degrees after femoral nailing have an incidence of 15% at our institution. This technique provides an efficient and accurate correction method with the use of an intraoperative digital protractor, avoiding the need for revision IM nailing or osteotomies.

Which of the three different intramedullary nail designs is superior in the treatment of femoral shaft fractures?

Aim: The aim of this study a retrospective comparison was the clinical and radiological results results of patients with femoral shaft fracture made oftreated with three different types of intramedullary nail (IMN). Material and Method: The study included 54 patients operated on in our clinic because of femoral shaft fracture. The records were retrospectively examined of 18 patients applied with locked IMN (LIMN), 17 with blade expandable IMN (BEIMN), and 19 with talon distalfix IMN (TDIMN). The groups were compared statistically in respect of age, gender, BMI, affected side, operating time (mins), radiation exposure (number of shots), time to union (weeks), visual analog scale (VAS) score, soft tissue problems associated with implant irritation, amount of shortening (mm), coronal, sagittal and torsional angulation (degrees). Results: The mean VAS score of the TDIMN group was determined to be statistically significantly higher than that of the LIMN and BEIMN groups (p=0.008, p=0.045). The operating times were similar in the BEIN and TDIMN groups (p=0.768) and significantly shorter than in the LIMN group (p

Use of a Retrograde Guidewire to Direct an Antegrade Femoral Nail

Antegrade intramedullary nailing for the treatment of diaphyseal femur fractures may present challenges in obtaining appropriate positioning of the distal tip of the nail. Known mismatch between the radius of curvature of commonly used nails and the anatomic bow of the femur may result in impingement or perforation of the anterior cortex of the distal femur. Additionally, some unique scenarios may arise that complicate traditional antegrade wire passage. We report our surgical technique and clinical experience using a retrograde guidewire to direct an antegrade femoral nail to aid in obtaining a desired central location of the distal nail tip. [Orthopedics. 2023;46(2):e132-e135.].

AO distractor and manual traction reduction techniques repair in distal tibial fractures: a comparative study

BACKGROUND

Minimally invasive plate osteosynthesis (MIPO) via percutaneous plate placement on the distal medial tibia can be performed with minimizes soft tissue injury and produces good clinical results. However, the difficulty with MIPO lies in how to achieve satisfactory fracture reduction and maintain that reduction via indirect reduction techniques to facilitate internal fixation. The purpose of this study was to compare the effects of AO distractor and manual traction reduction techniques combined with MIPO in the treatment of distal tibia fractures.

METHODS

Between January 2013 and December 2019, 58 patients with a distal tibia fracture were treated using MIPO. Patients were divided into two groups according to the indirect reduction method that was used: 26 patients were reduced with manual traction(group M), and 32 were reduced with an AO distractor (group A).Time until union and clinical outcomes including AOFAS ankle-rating score and ankle range of ankle motion at final follow-up were compared. Mean operative time, incision length, blood loss and postoperative complications were recorded via chart review. Radiographic results at final follow-up were assessed for tibial angulation and shortening by a blinded reader.

RESULTS

Mean operative time, incision length, and blood loss in group A were significantly lower than in group M(p = 0.019, 0.018 and 0.016, respectively).Radiographic evidence of bony union was seen in all cases, and mean time until union was equivalent between the two groups (p = 0.384).Skin irritation was noted in one case(3.1%) in group A and three cases(11.5%)in group M, but the symptoms were not severe and the plate was removed after bony union. There was no statistically significant difference in postoperative complications between the two groups(p = 0.461). Mean AOFAS score and range of ankle motion were equivalent between the two groups, as were varus deformity, valgus deformity, anterior angulation and posterior angulation. No patients had gross angular deformity. Mean tibial shortening was not significantly different between the two groups, and no patients had tibial shortening > 10 mm.

CONCLUSION

Both an AO distractor and manual traction reduction techniques prior to MIPO in the treatment of distal tibial fractures permit a high fracture healing rate and satisfying functional outcomes with few wound healing complications. An AO distractor is an excellent indirect reduction method that may improve operative efficiency and reduce the risk of soft tissue injury.

Antegrade versus retrograde nailing of proximal femur fractures: A cortical diameter based study

Background

Retrograde nailing of proximal femoral shaft fractures is controversial. The purpose of this study was to compare patients with proximal femur fractures undergoing antegrade versus retrograde intramedullary nailing (AIMN vs RIMN) and determine the safety and efficacy of RIMN.

Methods

A retrospective review was performed on 54 patients undergoing femoral IMN for proximal femoral shaft fractures at an urban level one trauma institution between January 2016 and July 2021.Fracture distance from the lesser trochanter (LT) was recorded and used to calculate the number of cortical diameters (NCD) from the LT. Proximal femur fractures were defined as < 3 NCD. AIMN and RIMN fixation was utilized in 31 (57.4%) and 23 (42.6%) patients, respectively. Outcomes measures included pre-/postoperative true translational and angular displacement (TTD and TAD), operative time, estimated blood loss (EBL), union rate, time to union, complications, and reoperations.

Results

AIMN and RIMN groups were similar in terms of age, sex, BMI, tobacco use, diabetes, ASA classification >2, AO/OTA classification, preoperative TTD or TAD, open fractures, or ballistic fractures. The AIMN group, had a shorter measured distance from the LT (47.0 vs. 66.1 mm, p = 0.04) but the difference in NCD was not significant (1.4 vs. 2.0, p = 0.07). Among patients with isolated IMN procedures, the RIMN group had shorter operative times (142.3 vs. 178.5 min, p = 0.01) and less EBL (100 vs. 250 mL, p = 0.008). There was no observed intergroup difference in terms of postoperative TTD/TAD, union rate, time to union, complications, or reoperations.

Conclusion

RIMN is a viable treatment option for proximal femoral shaft fractures that results in less operative time, less blood loss, and no detectable differences in union, reoperations, or complications.

Level of evidence

Level III, Retrospective cohort study.

Interest in curves: when the radius of curvature matters in femur fractures. A CT based morphometric study

PURPOSE

In today's era, fractures of the femur are primarily managed with intramedullary devices. Keeping in mind the anatomical sagittal bow of the femur, intramedullary devices have been devised with an anterior bow, but this varies amongst various manufacturers - leading to complications such as anterior cortex impingement beyond the isthmus and posterior cortical opening at the fracture site. We intend to find the average radius of curvature (ROC) of the anatomical bow of the femur and the variation of the same.

METHODS

Radiographic data of 150 normal femur scans done in 81 patients were loaded in the Mimics 21.0 software (Materialise, Leuven, Belgium). A centerline (of the medullary cavity) was created using the software. A best-fit circle was created in the sagittal plane involving a major part of the centerline, and ROC was calculated.

RESULTS

We found the average ROC of our data was 1027.2, with a standard deviation of 241.55. ROC and length of the femur (an indirect measure of height) had a slight positive correlation (r = 0.36; p < 0.05); and a highly positive correlation in the ROC of the left and right femurs of the same individuals (r = 0.605; p < 0.05).

CONCLUSIONS

The usual ROC of intramedullary nails is commonly > 1300 mm, much higher than the average ROC we identified in our population. Thus, we conclude that implants with smaller ROC in the range of 1100 mm are needed, leading to better implant placement in the canal and avoiding complications of anterior cortex impingement and preventing fracture gap widening in our setting.

Surgical outcomes of retrograde nailing enhanced with minimally invasive cerclage cable fixation for infra-isthmal femoral fracture

BACKGROUND

Infra-isthmal femoral fracture has been known as one of the risk factors for femoral nonunion. Retrograde intramedullary nailing can provide reliable stability of the distal fragment in infra-isthmal femoral fracture, but adequate reduction is required to achieve a successful outcome. This study aimed to evaluate the surgical outcomes of retrograde nailing enhanced with minimally invasive cerclage cable fixation for infra-isthmal femoral fracture.

METHODS

Between March 2013 and July 2017, 15 patients with infra-isthmal fractures treated with retrograde nailing and minimally invasive cerclage cable fixation were included in this study. Cerclage cable was applied for reduction aid (reduction cable) or prevention of further displacement in non-displaced extension of the distal spiral fracture (prevention cable). Number and function of cerclage cables, operation time, additional surgery, and complications were assessed. Further displacement of the wedge after nailing, coronal and sagittal alignment, displacement of the main fragment, and time from injury to union were evaluated as radiologic outcomes.

RESULTS

Of the 15 patients in this study, 14 were treated with reduction cables. Average postoperative coronal and sagittal angulation was 1.7° (1° varus to 4° valgus) and 1.6° (2° flexion to 11° extension). Mean displacement between the main fragments was 3.5 mm (range 0-22 mm). Four of the 14 cases used additional prevention cables combined with reduction cable. Only one case was treated solely with a prevention cable. A total of five prevention cables were maintained without further displacement. All patients achieved bone union, and the average time to union was 22.7 weeks (range 9-44 weeks). There were no complications as a result of surgery, such as infection or major neurovascular injury.

CONCLUSIONS

The minimally invasive cerclage cable technique could be a useful and safe enhancement in retrograde nailing for infra-isthmal femoral fracture in order to prevent further displacement and to reduce the main fracture.

Intramedullary nailing of subtrochanteric fractures in elderly patients: Comparative study of helical blade cephalomedullary nail versus reconstruction nail

INTRODUCTION

Intramedullary nailing (IMN), which is a common method for treating subtrochanteric fractures, is conducted as cephalomedullary (CMN) or reconstruction (RCN) nailing. Numerous studies have reported the effectiveness of CMN, which requires a shorter surgery time and provides stronger fixation strength with blade-type devices. However, the radiographic and clinical outcomes of the use of CMN and RCN in elderly patients aged ≥65 years have not been compared yet. This study aimed to investigate whether CMN offers superior outcomes over RCN in the treatment of subtrochanteric fractures in elderly patients.

MATERIALS AND METHODS

This retrospective study included 60 elderly patients (17 men and 43 women; mean age: 74.9 years) diagnosed with subtrochanteric fractures and treated with IMN with helical blade CMN (CMN group: 30 patients) or RCN (RCN group: 30 patients) between January 2013 and December 2018 with at least 1 year of follow-up period. Radiologic outcomes were evaluated based on the postoperative state of alignment and the achievement and timing of bony union at the final follow-up. Clinical outcomes were evaluated using the Merle d'Aubigné-Postel score. Radiologic and clinical outcomes in the two groups were compared and analyzed, and the occurrence of complications was examined.

RESULTS

The difference in malalignment between the two groups was not significant; however, the RCN group achieved more effective reduction. At the final follow-up, bony union was achieved within 18.9 weeks, on average, in 28 patients in the CMN group and within 21.6 weeks, on average, in 27 patients in the RCN group. Twenty patients in the CMN group and 26 in the RCN group showed good or better results according to the Merle d'Aubigné-Postel score. No significant differences were found for any of the parameters.

CONCLUSIONS

In the treatment of difficult subtrochanteric fractures in elderly patients, RCN can provide excellent reduction and strong fixation similar to CMN and can result in outstanding clinical and radiologic outcomes.

Radiographic outcomes of femur fractures following SIGN Fin nailing in low- and middle-income countries

Objective:

To measure the effectiveness of the Surgical Implant Generation Network (SIGN) Fin nail for achieving satisfactory postoperative radiographic alignment following femoral shaft fractures.

Methods:

Femoral shaft fractures stabilized with the SIGN Fin nail were identified using the SIGN Online Surgical Database. A random number generator was used to identify 500 femur fractures fixed within 6 weeks of injury for which postoperative radiographs were available. Fractures were classified using OTA/AO and Winquist-Hansen classification systems. Deviation from anatomic alignment was measured on anterior-posterior and lateral radiographs using an on-screen protractor tool. Other clinical variables recorded in the SIGN Online Surgical Database were also analyzed. Simple logistic regression was used to assess for associations between subject and surgical characteristics and misalignment status. Intra- and inter-rater agreement was assessed with intraclass correlation coefficient (ICC).

Results:

The overall rate of malalignment >5° was 9.4%. Factors associated with increased incidence of malalignment include older age, increased time to surgery, distal diaphyseal location, closed (vs open) reduction, degree of comminution, and fracture classification. Intra-rater ICC was 0.70 (0.52, 0.82) in the coronal plane and 0.55 (0.32, 0.72) in the sagittal plane. Inter-rater ICC was 0.37 (0.08, 0.60) and 0.32 (0.05, 0.54), respectively.

Conclusion:

The SIGN Fin nail is an effective implant for fixation of femoral shaft fractures in resource-limited regions, achieving rates of satisfactory postoperative alignment comparable to that of the standard SIGN nail as well as femoral shaft fractures treated in North American Trauma Centers. Further research is required to investigate rotational alignment and long-term clinical outcomes for the SIGN Fin nail.

Level of evidence:

IV.

Reconstruction of Orthographic Mosaics From Perspective X-Ray Images

Image stitching is a prominent challenge in medical imaging, where the limited field-of-view captured by single images prohibits holistic analysis of patient anatomy. The barrier that prevents straight-forward mosaicing of 2D images is depth mismatch due to parallax. In this work, we leverage the Fourier slice theorem to aggregate information from multiple transmission images in parallax-free domains using fundamental principles of X-ray image formation. The details of the stitched image are subsequently restored using a novel deep learning strategy that exploits similarity measures designed around frequency, as well as dense and sparse spatial image content. Our work provides evidence that reconstruction of orthographic mosaics is possible with realistic motions of the C-arm involving both translation and rotation. We also show that these orthographic mosaics enable metric measurements of clinically relevant quantities directly on the 2D image plane.

Antegrade nailing in femoral shaft fracture patients - comparison of outcomes of isolated fractures, multiple fractures and severely injured patients

INTRODUCTION

Femoral shaft fractures in adults are high-energy fractures typically accompanied by additional fractures of the upper and lower extremities and brain, thoracic, or abdominal injuries. Intramedullary nailing enables early ambulation with a few complications, but rates of non-union remain high. Therefore, we aimed to compare bone union after femoral shaft fractures in adults (20-65 years old) depending on the injury severity and presence of multiple fractures.

PATIENTS AND METHODS

This study retrospectively examined 178 patients (145 male and 33 female) who underwent intramedullary nailing for a femoral shaft fracture (Arbeitsgemeinschaft für Osteosynthesefragen/Orthopedic Trauma Association 32 type) between January 2014 and December 2018 and were followed up for at least 1 year. Patients who underwent intramedullary nailing after the preliminary application of an external fixator were excluded. Patients were divided into groups with isolated femoral shaft fractures (IS group), an injury severity score of ≤14, and multiple fractures of the extremities and the pelvic bone (at least three locations), including a femoral shaft fracture (MU group), and severely injured (injury severity score ≥15) with femoral shaft fractures (SE group). Non-union rate by group and risk factors related to bone union and bone union rate according to time to full weight bearing were analyzed.

RESULTS

In total, 29, 54, and 95 patients were assigned to the IS group, MU group, and SE group, respectively. Non-union was observed in two patients in the IS group (6.9%), six patients in the MU group (11.1%), and 11 patients in the SE group (11.6%). There were no significant differences in the bone union rate, according to multiple fractures (p=0.515) and injury severity score (p=0.561). Additionally, no differences in the bone union rate were observed according to the time to full weight bearing. Depending on open fracture (p=0.004) and fracture severity (p=0.011), the non-union rate showed a difference of up to four times or greater.

CONCLUSIONS

When intramedullary nailing is performed to treat femoral shaft fractures, multiple fractures and severe trauma do not directly affect bone union. However, it should be noted that open fracture and greater fracture severity lead to higher chances of non-union.

Malrotation of Long Bones

Rotational malreduction is a common yet underreported postoperative complication following intramedullary nailing of long bone fractures. In most situations, this can be prevented at the time of initial surgery with meticulous preoperative planning, careful use of intraoperative fluoroscopy, and awareness of risk factors for malrotation. However, rotational alignment remains difficult to assess by clinical examination so a high index of suspicion is always necessary. Here, the authors review the literature on this complication and report on 3 such cases of femoral and the tibial malrotation, methods for calculating femoral version and tibial torsion, and techniques for correcting these deformities.

Finite element analysis of biomechanical effects of residual varus/valgus malunion after femoral fracture on knee joint

OBJECTIVE

Post-operative femoral shaft fractures are often accompanied by a residual varus/valgus deformity, which can result in osteoarthritis in severe cases. The purpose of this study was to investigate the biomechanical effects of residual varus/valgus deformities after middle and lower femoral fracture on the stress distribution and contact area of knee joint.

METHODS

Thin-slice CT scanning of lower extremities and MRI imaging of knee joints were obtained from a healthy adult male to establish normal lower limb model (neutral position). Then, the models of 3°, 5°, and 10° of varus/valgus were established respectively by modifying middle and lower femur of normal model. To validate the modifying, a patient-specific model, whose BMI was same to former and had 10° of varus deformity of tibia, was built and simulated under the same boundary conditions.

RESULT

The contact area and maximum stress of modified models were similar to those of patient-specific model. The contact area and maximum stress of medial tibial cartilage in normal neutral position were 244.36 mm² and 0.64 MPa, while those of lateral were 196.25 mm² and 0.76 MPa. From 10° of valgus neutral position to 10° of varus, the contact area and maximum stress of medial tibial cartilage increased, and the lateral gradually decreased. The contact area and maximum stress of medial meniscus in normal neutral position were 110.91 mm² and 3.24 MPa, while those of lateral were 135.83 mm² and 3.45 MPa. The maximum stress of medial tibia subchondral bone in normal neutral position was 1.47 MPa, while that of lateral was 0.65 MPa. The variation trend of medial/lateral meniscus and subchondral bone was consistent with that of tibial plateau cartilage in the contact area and maximum stress.

CONCLUSION

This study suggested that varus/valgus deformity of femur had an obvious effect on the contact area and stress distribution of knee joint, providing biomechanical evidence and deepening understanding when performing orthopedic trauma surgery or surgical correction of the already existing varus/valgus deformity.

"Ratio of fracture site diameter to isthmus femoral canal diameter" as a predictor of complication following treatment of infra-isthmal femoral shaft fracture with antegrade intramedullary nailing

INTRODUCTION

Fixation of infra-isthmus femoral shaft fracture using antegrade intramedullary (IM) nailing is difficult and is associated with a high complication rate. This study aimed to identify risk factors for complications following this procedure. The ratio of the fracture site diameter to the diameter of the femoral intramedullary canal of the isthmus (FI ratio) was evaluated as a novel parameter to predict complication.

MATERIALS AND METHODS

Patients who underwent antegrade IM nailing for infra-isthmus femoral shaft fracture between January 2008 and December 2018 and had a minimum of 12 months of follow-up were retrospectively reviewed. The primary outcome was occurrence of complication, including non-union, mal-alignment, fixation failure, or progressive loss of reduction. Logistic regression analysis was performed to identify risk factors of complication. The sensitivity and specificity of FI ratio as a predictor of complication was calculated. A receiver operating characteristic (ROC) curve was generated to establish an FI ratio threshold to predict occurrence of complication following antegrade IM nailing.

RESULTS

Sixty-five patients with a mean age of 47.1 years were included. Using univariate logistic regression analysis, comminuted fracture pattern (p=0.026), distance from screws to fracture site (< 3cm) (p=0.002), and higher FI ratio (p=0.001) were associated with complication. Using multivariate logistic regression analysis, FI ratio was identified as an independent risk factor for complication following antegrade IM nailing (p=0.038). ROC curve indicated that FI ratio ≥ 2 had sensitivity and specificity of 0.72 and 0.72, respectively, in predicting complication.

CONCLUSIONS

Our study indicates that wider intramedullary diameter at the fracture site was associated with higher complication rate following antegrade IM nailing in distal infra-isthmal femoral fractures. The FI ratio could be a reliable predictor of complication after antegrade IM nailing for such fracture, and alternative strategies should be considered for patients with higher FI ratio (≥ 2).

Application of a double reverse traction repositor in the retrograde intramedullary nailing of distal femur fractures

Objective

The purpose of this prospective study was to introduce the application of a double reverse traction repositor (DRTR) in the retrograde intramedullary nailing (RE-IMN) of AO/OTA 33A distal femur fractures.

Patients and methods

A total of 27 patients with AO/OTA type 33A distal femur fractures who were admitted from January 2015 to May 2017 to a level I trauma center of a tertiary university hospital were enrolled in this prospective study. A DRTR was used to facilitate RE-IMN for the reduction of distal femur fractures in all patients. The demographic and fracture characteristics, surgical data, postoperative complications, and prognostic indicators of 24 patients were recorded.

Results

The DRTR helped achieve and maintain the reduction of all distal femur fractures in the present study. All surgeries were conducted by closed reduction, and excellent alignment was observed in the postoperative X-ray images. In the present study, 18 males and 6 females were included, and the average age of all patients was 51.3 years (range, 24–68 years). The mean operation time, intraoperative blood loss, intraoperative fluoroscopy time, and length of postoperative hospital stay were 137 min (range from 80 to 210 min), 320 ml (range from 200 to 600 ml), 28 (from 24 to 33), and 9 days (from 5 to 14 days), respectively. Eleven patients were found to have postoperative deep venous thrombosis before discharge. No cases of wound infection were observed. No cases of nonunion or malunion were observed. The average follow-up duration was 21 months (18–30 months). The average HHS, LKFS, and VAS scores at the 1-year follow-up were 89.9 (86–97), 79.1 (75–87), and 2.1 (from 0 to 5). No complications associated with DRTR were found.

Conclusions

A DRTR can be successfully applied in the treatment of distal femur fractures with RE-IMN, and it can not only help achieve or maintain the reduction of distal femur fractures with closed methods but also promote fixation with RE-IMN.

Evaluation and management of atypical femoral fractures: an update of current knowledge

Atypical femoral fractures are often attributed to the use of anti-resorptive medications such as bisphosphonates (BP). Whilst they have proven effects on fragility fracture prevention, clinical and laboratory evidence is evolving linking BP-related suppression of bone remodelling to the development of atypical stress-related sub-trochanteric fractures (Shane et al. in JBMR 29:1-23, 2014; Odvina et al. in JCEM 90:1294-301, 2005; Durchschlag et al. in JBMR 21(10):1581-1590, 2006; Donnelly et al. in JBMR 27:672-678, 2012; Mashiba et al. in Bone 28(5):524-531, 2001; Dell et al. in JBMR 27(12):2544-2550, 2012; Black et al. in Lancet 348:1535-1541, 1996; Black et al. in NEJM 356:1809-1822, 2007; Black et al. in JAMA 296:2927-2938, 2006; Schwartz et al. in JBMR 25:976-82, 2010). Injuries may present asymptomatically or with prodromal thigh pain and most can be successfully managed with cephalomedullary nailing and discontinuation of BP therapy. Such injuries exhibit a prolonged time to fracture union with high rates of non-union and metal-work failure when compared to typical subtrochanteric osteoporotic femoral fractures. Despite emerging literature on AFFs, their management continues to pose a challenge to the orthopaedic and extended multi-disciplinary team. The purpose of this review includes evaluation of the current evidence supporting the management of AFFs, clinical and radiological features associated with their presentation and a review of reported surgical strategies to treat and prevent these devastating injures.

Surgical outcomes of simple distal femur fractures in elderly patients treated with the minimally invasive plate osteosynthesis technique: can percutaneous cerclage wiring reduce the fracture healing time?

INTRODUCTION

Achieving adequate reduction is difficult when performing minimally invasive plate osteosynthesis (MIPO) in elderly patients with simple distal femur fracture. This study aimed to evaluate the elderly patients who had undergone percutaneous wiring-assisted reduction with MIPO for simple distal femur fractures to determine the effect of this technique on reduction quality and fracture union.

MATERIALS AND METHODS

Between January 2009 and September 2017, 56 patients (56 femurs) with displaced simple distal femur fractures treated with MIPO at three trauma centers were finally enrolled. The MIPO technique with percutaneous cerclage wire reduction was performed in 25 patients (Group A). Among them, 12 patients had a simple spiral metaphyseal fracture (Group A*). In comparison, MIPO without percutaneous cerclage wire reduction was performed in 31 patients (Group B). Among them, seven patients had a simple spiral metaphyseal fracture (Group B*). Medical records containing surgical records were retrospectively reviewed to investigate demographic data, comorbidities, complications, operative time, and fluoroscopic time. Radiographs were evaluated for assessing the quality of the reduction and fracture union.

RESULTS

The mean fracture union time of Group A* was 21.7 weeks, which was significantly shorter than that of Group B* (28.6 weeks). The mean coronal and sagittal angulation in Group A* was 0.6° and 0.7°, respectively, which were significantly lesser than those in Group B* (2.4° and 3.2°, respectively). Mean translation in Group A* was 1.43 mm, which was significantly shorter than that in Group B* (3.81 mm). Nonunion occurred in two patients in Group B.

CONCLUSION

Surgical treatment of simple spiral distal femur fractures with percutaneous cerclage wiring-assisted reduction and the MIPO technique in elderly patients resulted in better reduction and faster union time. Therefore, this technique could be a good solution if used in accordance with the indication.

Clinical and radiographic outcomes following retrograde SIGN fin nailing for femoral shaft fractures

PURPOSE

The Surgical Implant Generation Network (SIGN) intramedullary nail was designed for use in resource limited settings which often lack fluoroscopy, specialized fracture tables, and power reaming. A newer design iteration, the SIGN Fin nail, was developed to further simplify retrograde femoral nailing by making proximal interlocking screw placement unnecessary. Instead, the leading end of the Fin nail achieves stability through an interference fit within the proximal femoral canal. While the performance of the traditional SIGN nail has been reported previously, no large series has examined long-term clinical and radiographic outcomes of femoral shaft fractures treated with the SIGN Fin nail.

METHODS

The SIGN online surgical database was used to identify all adult femoral shaft fractures treated with the SIGN Fin nail since its introduction. All patients with minimum 6 month clinical and radiographic follow-up were included in the analysis. Available demographic, injury, and surgical characteristics were recorded. Fracture alignment was evaluated on final follow-up radiographs using a previously validated on-screen protractor tool. Coronal and sagittal plane alignment measurements were recorded as deviation from anatomic alignment (DFAA), with units in degrees. Fracture healing was assessed on final follow-up radiographs, with union defined as any bridging callus and/or cortical remodeling across one cortex on orthogonal views. Clinical outcomes available in the database included knee range of motion (ROM) greater than 90° and weight-bearing status at final follow-up. Clinical and radiographic outcomes were then compared between patients with united and nonunited fractures.

RESULTS

The database query identified 249 femoral shaft fractures stabilized with the Fin nail in 242 patients who had minimum 6 month clinical and radiographic follow-up. Final follow-up radiographs were performed at an average of 48 weeks postoperatively. Average coronal and sagittal plane alignment measured on final follow-up radiographs were 2.18° and 2.58°, respectively. The rate of malalignment (DFAA > 10° in either plane) at final follow-up was 6%. Two hundred twenty-nine fractures (92%) were united at final follow-up. Overall, 209 (84%) of patients achieved full weight bearing and 214 (86%) achieved knee ROM >90° at final follow-up. Compared to patients with united fractures, those with nonunion were less likely to achieve full weight bearing (20% vs 90%, P < .001) and knee ROM >90° (30% vs 91%, P < .001). There was no significant difference in mean DFAA between united and nonunited fractures in the coronal (2.1° vs 3.8°, P = .298) or sagittal (2.5° vs 3.5°, P = .528) planes.

CONCLUSION

The SIGN Fin nail achieves satisfactory radiographic alignment and clinical outcomes at minimum 6 month follow-up. The overall union rate is comparable to that achieved with the standard SIGN nail. Ease of implantation makes the Fin nail an attractive option in resource-limited settings.

The design of an "H" joystick for closed reduction and its application in segmental and comminuted femoral shaft fractures: an innovative technique

Background

Closed reduction and locked intramedullary nailing has become a common surgical method in the treatment of femoral shaft fractures. Overlap and rotation displacements can usually be corrected through the use of an orthopedic traction table. However, lateral displacement and angulation persist.

Methods

In this paper, we describe a joystick that can be used in the closed reduction of a fracture. It can correct lateral displacement and angulation, and has the advantage of multi-direction reduction. The device described in this paper includes two parallel horizontal joysticks, one vertical main joystick and four assistant rods. Moreover, there are many specific spacing holes in the two parallel horizontal joysticks and a groove structure in the vertical main joystick. When the main “H” joystick is pressed, it can adjust lateral displacements and angulation because of the lever principle. The distance between parallel horizontal joysticks and assistant rods can be adjusted to the fracture position and body mass index of different patients.

Results

The study participants consisted of 11 males and 5 females with a mean age of 31.0 years. All participants had good closed reduction and achieved bony union without any complications such as infection, nerve injury, non-union, malunion, and limb length discrepancy. By using an “H” joystick, closed femoral shaft fracture reduction and locked intramedullary nailing becomes simpler and faster.

Conclusion

Based on the use of this instrument, we can easily and conveniently obtain the correct reduction situation, which leads to better surgical results. This device can be applied in the reduction of clinical femoral fractures and gradually extended to the reduction of other fractures.

Treatment of Ipsilateral Femoral Neck and Shaft Fractures With Cannulated Screws and Antegrade Reconstruction Nail

Ipsilateral femoral neck and shaft fractures are challenging injuries, and there are different fixation options but no consensus on a superior construct. Our preferred method is cannulated screw fixation of the femoral neck and antegrade reconstruction nailing of the shaft. Compressive fixation of the femoral neck fracture with cancellous lag screws followed by reconstruction nail placement provides compressive fixation and fixed angle support of the neck fracture while allowing for more optimal treatment of femoral shaft fractures at or above the isthmus. The purpose of this submission is to describe the surgical decision-making, surgical technique, and all surgically related complications of this technique.

Is minimally invasive plate osteosynthesis superior to open plating for fixation of two-part fracture of the proximal humerus?

PURPOSE

Displaced two-part fractures of the proximal humerus are generally treated with open plate (OP) fixation. Recently, minimally invasive plate osteosynthesis (MIPO) has been increasingly favored for fracture healing and functional recovery. We aimed to compare OP and MIPO for two-part fractures of the proximal humerus to identify outcome differences.

METHODS

All patients who underwent OP or MIPO for a displaced two-part fracture of the proximal humerus at a single level I trauma center between 2007 and 2013 were retrospectively evaluated. Of the patients, 17 were treated using the OP method through the delto-pectoral approach and 19 with MIPO through deltoid splitting. Radiographic results were evaluated to determine the union rate, time to union, and alignment. Functional outcomes were measured with Constant and UCLA scores. Radiation exposure and operative time were also evaluated.

RESULTS

All patients achieved bone union without complication. In the OP and MIPO groups, no significant difference was observed in the neck shaft angles, constant scores, or UCLA scores. The OP group required less radiation exposure time than the MIPO group ( p < 0.001). However, the OP group showed more operation time than the MIPO group ( p < 0.001).

CONCLUSIONS

Both techniques showed satisfactory radiographic and functional outcomes in two-part fractures of the proximal humerus. Although MIPO technique offers advantages, including minimal soft tissue damage and short operation time, surgeons and patients should be warned of the invisible risk from the radiation hazard.

Design and Analysis of Customized Fixation Plate for Femoral Shaft

BACKGROUND

In the recent years, several techniques have been used to treat femur diaphyseal fracture. Among all the traditional fixation techniques, unstable fixation remains the biggest challenge for orthopedists. Researchers have recommended new approaches to deal with diaphyseal femur fracture. However, solely few had been successful in getting some better results. In the present work, a methodology comprising of design and finite-element analysis of a counter fit customized fixation plate has been suggested to provide a stable fixation.

MATERIALS AND METHODS

In the present work, reverse engineering (RE) approach has been invoked to create a 3D model of a fresh fractured femur diaphysis bone using the computed tomography (CT) scan data available in digital imaging and communications in medicine (DICOM) format. To provide stable fixation, a counter fit customized fixation plate at medial side has been designed and simulated under static physiological loading conditions for three different biocompatible materials, viz., titanium alloy (Ti6Al4V), stainless steel (SS-316L), and cobalt-chromium-molybdenum alloy (Co-Cr-Mo).

RESULTS

Static stress distribution and deformation analysis of the clinical setup have been performed for the aforementioned materials. It has been observed that the stresses and deformation developed in all the materials are quite low. It implies that customized fixation plates will provide stable fixation resulting in improved fracture union.

CONCLUSION

The proposed work will assist the medical practitioners regarding the design and analysis of customized implants. This will reduce the post surgical failures and residual pain due to non-union fractured region.

The rotational fixator: A new device

Objectives

Malrotation after surgical treatment of femoral shaft fractures is a common problem and often leads to follow-up procedures with uncertain outcome. The aim of this study is the validation of a new device (Rotational Fixator) to perform the correction safely and accurately.

Methods

In an in-vitro study, we tested the Rotational Fixator on 21 corpse bones against a commercially available standard goniometer for measurement inaccuracies. For this purpose, we varied the rotation width from 10 to 30° in inside and outside rotation.

Results

We found a small measurement inaccuracy of 1-2° with increasing rotation. The smallest differences are found at 10° IR with 0.9524° (SD ± 1.0713; p = 0.001) difference and 10° ER with at 0.5952° (SD ± 0.6823; p = 0.001) difference and increase up to 30° (IR 1.6667°, SD ± 1.7121, p < 0.000/ER 1.5000°, SD ± 1.0488, p < 0.000).

Conclusions

The measurement results of the device show a constant deviation from the gold standard but are constant in the measurement error and slightly in relation to the desired correction range, so that a further review of the device and further testing in in vivo studies makes sense.

Levels of evidence

Level 3.

Modern Implant Options for the Treatment of Distal Femur Fractures

Distal femur fractures occur in a periarticular fracture pattern and disproportionately afflict an aging population. Although the goals of treatment have not changed, the emergence of new surgical techniques and devices has recently been developed and refined to treat this challenging fracture pattern. Treatment options include open reduction and internal fixation with periarticular locking plates, intramedullary nails, or distal femur replacement. Despite rapid adoption, these modern solutions display a concerning complication rate, specifically from nonunion and malunion. The indications for each of these treatment strategies are not well defined and are the subject of current debate. As with the use of any orthopaedic implant, the knowledge of the strengths and weaknesses of each construct is paramount to successful treatment of these fractures. Recently, as the understanding of the biomechanics of distal femur fracture healing has improved, the literature has demonstrated clinical and theoretical improvements in the outcomes after distal femur fracture repair.

Intraoperative ultrasound-guided reduction of femoral shaft fractures using intramedullary nailing: a technical note

OBJECTIVES

Intramedullary (IM) nailing is the preferred method for treatment of femoral shaft fractures. However, for the surgical staff and the patients, exposure to large dose of X-rays is inevitable during the procedure. In this paper, a new technique based on ultrasound is proposed to guide the reduction of femoral fractures, reducing radiation exposure.

METHODS AND RESULTS

By means of particular continuous transverse and multiplanar longitudinal scanning, the deformity pattern information of the fracture could be efficiently acquired. Adequate reduction could be achieved under the real-time guidance of intraoperative ultrasound.

CONCLUSIONS

Intraoperative ultrasound can guide the reduction of femoral shaft fracture using IM nailing, and reduce the radiation exposure of medical staff and patients.

Satisfactory postoperative alignment following retrograde SIGN Fin nailing for femoral shaft fractures: A case-control study

Purpose

In developing countries, long bone fractures following trauma are a significant contributor to morbidity, and operating room resources are often limited in these settings. The Surgical Implant Generation Network (SIGN) Fin nail may reduce the challenges of retrograde intramedullary nailing of femoral fractures without fluoroscopy. In contrast to the traditional SIGN nail placed in a retrograde fashion, the Fin nail does not require proximal interlocking screws. Instead, the nail achieves stability through an interference fit within the proximal femoral canal. The purpose of this study is to compare postoperative alignment in femoral shaft fractures treated with either a retrograde SIGN Fin nail or a standard retrograde SIGN nail.

Method

Using the SIGN online surgical database, we identified all femoral shaft fractures treated with a retrograde SIGN Fin nail at 2 African hospitals. Two examiners independently classified fracture patterns using the Arbeitsgemeinschaft für Osteosynthesefragen/Orthopaedic Trauma Association (AO/OTA) classification system. Using an on-screen protractor tool, postoperative coronal and sagittal plane alignment were measured and recorded as deviation from anatomic alignment (DFAA), with units in degrees. Available patient demographics and surgical details were also recorded. Fin nail cases were matched in a 1:1 ratio to retrograde standard SIGN nail cases based on AO/OTA fracture type.

Results

Twenty-eight retrograde Fin nail cases were identified, and 28 matched retrograde SIGN nail cases were selected. The Fin nail and retrograde SIGN nail groups were well matched in terms of demographics, AO/OTA fracture type, and surgical characteristics. There was no significant difference in postoperative coronal or sagittal plane alignment between the groups. There were no cases in either group of average postoperative malalignment >5° in any plane.

Conclusion

The SIGN Fin nail appears to achieve satisfactory radiographic alignment without the need for proximal interlocking screws, making it an attractive implant for retrograde femoral shaft fracture fixation in resource-limited settings. Further research is required to validate these findings and determine long-term Fin nail clinical outcomes.

Extra Articular Distal Femoral Fractures in the Elderly Treated with Retrograde Nailing Using a Spiral-Locking Blade System

BACKGROUND

The number of elderly patients sustaining long bone fractures is increasing with the rise of elderly population in the western world. Management of distal femur fractures is particularly difficult due to osteoporosis and other associated comorbidities. The key to management would be by surgical stabilization, which allows early mobilization. This study was devised to look into the radiological outcome and complication rate in a series of elderly patients who were treated with retrograde nail using spiral locking blade system for extra articular distal femur fractures.

MATERIALS AND METHODS

This is a retrospective study of patients who have undergone retrograde nailing with spiral-locking blade for distal femoral fractures (extra articular) above the age of 70 years in a major trauma center from 2001 to 2015. Notes were assessed for postoperative complications; time to union and final postoperative followup radiographs were assessed for alignment using a scoring system.

RESULTS

Forty one patients with an average age of 80 years and an average followup period of 9 months were included. The mean radiological score at final followup was 10.34 (range 8-12), with no significant shortening in any of the patients. Thirty patients had excellent radiological score (>10) and 11 patients scored good (8-9). The difference in time to union between Group 1 - simple fracture pattern (3.42 months) and Group 2 - complex comminuted fracture pattern (4.74 months) was not statistically significant (P = 0.072). There were five delayed unions but no cutout or metal work failure.

CONCLUSION

The retrograde femoral nail with distal spiral-locking blade system can be a good surgical option for the treatment of extra articular distal femoral fractures in the elderly with the possibility of early weightbearing.

Use of Inherent Anteversion of an Intramedullary Nail to Avoid Malrotation in Comminuted Femur Fractures: A Prospective Case- Control Study

OBJECTIVES

To (1) evaluate using the inherent anteversion of a second or third generation femoral nail to set the version of the femur during locked intramedullary nailing of comminuted femoral shaft fractures (Espinosa Technique [ET]) and compare it with our traditional method (traditional group [TG]) and (2) assess the variation of anteversion because of the inherent play in the nail itself.

DESIGN

A prospective IRB-approved study.

SETTING

Academic US Level 1 Trauma Center.

PATIENTS

Fifty-two consecutive patients with comminuted femur fractures all completed the study.

INTERVENTION

The first 27 patients had the anteversion determined using the patellar shadow and lesser trochanter (TG), and the next 25 patients were treated by ET.

MAIN OUTCOME MEASURE

Computed tomography scanogram for femoral anteversion and length in the normal versus operated femur.

RESULTS

A >15 degree difference from native to operated legs was found in 8/27 TG (29%, 95% CI 15.3%-54.2%), with a mean difference of 11.6 ± 10.2 degrees (95% CI 8.8-16.17) verses 1/25 in the ET group (2.5%, 95% CI 0%-15.3%), with a mean difference of 4.8 ± 6.2 degrees (95% CI 1.38-8.9) (P = 0.0068). There was a 5 degree variability in our ability to center the proximal locking screw in the femoral head and 5 degrees variation in distal locking.

CONCLUSIONS

The inherent anteversion of a second generation nail can be used to minimize malrotation of the femur after comminuted fractures during locked intramedullary nailing in patients with normal anteversion and is superior to our present fluoroscopic technique.

LEVEL OF EVIDENCE

Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

Long Segment Blocking Screws Increase the Stability of Retrograde Nail Fixation in Geriatric Supracondylar Femur Fractures: Eliminating the "Bell-Clapper Effect"

OBJECTIVES

To determine the change in stiffness and horizontal translations of a geriatric supracondylar femur fracture model with the addition of distal segment blocking screws versus proximal (long) segment blocking screws to the standard retrograde intramedullary nail construct.

METHODS

Unstable supracondylar femur fractures (OTA/AO 33-A3) were created; all specimens were instrumented with a retrograde intramedullary nail. Specimens were divided into 2 groups (6 matched pairs per group). Group 1 compared the standard construct (1 proximal screw and 3 distal screws) to a distally augmented construct, with blocking screws placed in the distal metaphyseal segment. Group 2 compared the distally augmented construct to one in which blocking screws were placed just proximal to the fracture (long segment blocking screws). Specimens were then axially loaded and cycled to failure or run-out.

RESULTS

There was no significant difference in baseline stiffness, survival through cyclic loading, stiffness after cyclic loading, or cycles to failure between femurs treated with distal blocking screws and femurs treated without blocking screws (group 1). Femurs with blocking screws in the long proximal segment had significantly greater baseline stiffness, stiffness after cyclic loading, and less horizontal translation at the fracture site (group 2). There was no difference in survival through cyclic loading or cycles to failure.

CONCLUSION

Long segment blocking screws are biomechanically superior to blocking screws in the distal segment or no blocking screws initially and after cyclic loading in an unstable geriatric supracondylar femur fracture model treated with intramedullary nail.

CLINICAL RELEVANCE

Surgeons may use blocking screws to aid in fracture alignment during retrograde nail fixation. In addition, the placement of long segment blocking screws can help resist failure of fixation in geriatric patients by eliminating the "Bell-clapper effect."

Treatment of infra-isthmal femoral fracture with an intramedullary nail: Is retrograde nailing a better option than antegrade nailing?

INTRODUCTION

Antegrade intramedullary (IM) nailing is ideal for femoral shaft fractures, but fixing the fracture distal to the isthmal level may be difficult because of medullary canal widening and the proximity of fracture location from the distal femoral joint line. This study aimed to compare treatment results between antegrade and retrograde nailing for infra-isthmal femoral shaft fracture, and to identify influencing factors of nonunion and malalignment.

MATERIALS AND METHODS

Sixty patients with infra-isthmal femoral shaft fractures treated with IM nailing and followed-up for > 1 year were enrolled in this retrospective study, 38 in the antegrade nailing group, and 22 in the retrograde nailing group. The two groups had no significant differences in age, sex, and fracture location (p = 0.297, Mann-Whitney test). Radiological evaluation was performed, and functional result was assessed using the Knee Society scoring system. Complications were analyzed in accordance with fracture location, fracture type, and operative method.

RESULTS

According to the AO/OTA classification, 35, 16, and 9 cases were type A (A1: 1, A2: 11, A3: 23), B (B1: 2, B2: 7, B3: 7), and C fractures (C2: 4, C3: 5), respectively. The mean follow-up duration was 29.5 months. In the antegrade and retrograde nailing groups, the primary bony union rates were 73.7% in 20.7 weeks (range 12-41) and 86.4% in 17.4 weeks (range 12-30), respectively. The two groups showed no significant differences in union rate (p = 0.251, Pearson's Chi-square test) and union time (p = 0.897, Mann-Whitney test). No cases of malalignment of > 10° in any plane were found in both groups. The mean Knee Society scores were 92 (range 84-100) and 91 (range 83-95) in the antegrade and retrograde nailing groups, respectively, showing no significant difference (p = 0.297, Pearson's Chi-square test). Although fracture location was not significantly related to union rate (p = 0.584, Mann-Whitney test), patients with an effective working length of the distal segment of < 0.75 were prone to nonunion (p = 0.003, Pearson's Chi-square test).

CONCLUSIONS

Although no significant difference was found in IM nail type, the IM nail with a shorter working length distal to the fracture showed a strong relationship with nonunion.

Minimizing Leg Length Discrepancy After Intramedullary Nailing of Comminuted Femoral Shaft Fractures: A Quality Improvement Initiative Using the Scout Computed Tomography Scanogram

OBJECTIVES

To prevent leg length discrepancy (LLD) after locked femoral nailing in patients with comminuted femoral shaft fractures.

DESIGN

Prospective consecutive case series aimed at quality improvement.

SETTING

Level 1 Trauma Center PATIENTS:: Ninety-eight consecutive patients with a comminuted femoral shaft fracture underwent statically locked intramedullary nailing, with a focused attempt at minimizing LLD during surgery.

INTERVENTION

A computed tomography scanogram of both legs was performed on postoperative day 1 to assess for residual LLD. Patients were offered the option to have LLD >1.5 cm corrected before discharge.

MAIN OUTCOME MEASURE

LLD >1.5 cm.

RESULTS

Twenty-one patients (21.4%) were found to have an LLD >1.5 cm. An LLD >1.5 cm occurred in 10/55 (18%) antegrade nail patients and 11/43 (26%) retrograde nail patients (P = 0.27). No difference was noted based on the mechanism of injury, surgeon training and OTA/AO type B versus C injury. Ninety of 98 patients left with <1.5 cm LLD, 13/21 had a correction all to ≤0.6 cm, and 8 decided to accept the LLD and declined early correction.

CONCLUSIONS

No patient left the hospital with an LLD >1.5 cm after locked intramedullary nailing for a comminuted femoral shaft fracture without being informed and the option of early correction. We recommend using a full-length computed tomography scanogram after IM nailing of comminuted femur fractures to prevent iatrogenic LLD.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Effect of Blocking Screws on Union of Infraisthmal Femur Fractures Stabilized With a Retrograde Intramedullary Nail

OBJECTIVE

To investigate the effect of blocking screws (BS) on the union rate and stability of infraisthmal femur fractures treated with retrograde intramedullary nail (RIMN) insertion.

DESIGN

Retrospective cohort study.

SETTING

A single level 1 trauma center.

PATIENTS/PARTICIPANTS

All patients with an infraisthmal femur fracture treated with a RIMN from 2005 to 2012 were included.

INTERVENTION

All fractures were treated with a RIMN. BS were used at the discretion of the treating surgeon.

MAIN OUTCOME MEASUREMENTS

(1) Radiographic time to union, (2) initial postoperative sagittal and coronal angulation, and (3) final sagittal and coronal angulation.

RESULTS

Neither the average time to union (BS 21.1 weeks vs. 21.8 weeks), nor union rates (BS 61% vs. 77%) were statistically different between BS and non-BS constructs. No significant alignment differences existed whether BS were used or not.

CONCLUSIONS

In this study, we were not able to verify our hypothesis. In fact, we did not find any significant advantages when BS were added to a RIMN construct for distal femur fractures with respect to union time, union rate, or improvements in alignment. Additional studies are needed to determine the actual benefit of BS in the treatment of infraisthmal femoral shaft fractures treated with retrograde intramedullary nailing.

LEVEL OF EVIDENCE

Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

Provisional Plating of Subtrochanteric Femur Fractures Before Intramedullary Nailing in the Lateral Decubitus Position

Subtrochanteric femur fractures remain a challenge for surgeons to obtain and maintain adequate reduction and stable fixation. For this reason, multiple techniques have been described, but we are unaware of a detailed contemporary description of the combination of provisional plating before intramedullary fixation in the lateral decubitus position. We present our technique as it was used from 2011 to 2015 to treat 22 fractures and how it compared clinically to the other 48 subtrochanteric femur fractures treated during that period. The clinical and radiographic outcomes for all fractures were evaluated. The operative time was shorter when no open reduction was used but open cases showed no significant difference when using a provisional plate. Those patients treated with provisional plating were shown to have higher blood loss values and longer operative times, but when looking at the outcomes, the rate of malunion, which was defined as >5 degrees of angulation on postoperative radiographs, was significantly lower at 0% in the provision plating in the lateral decubitus position subset compared with the remaining subtrochanteric fractures, 27.7% (P = 0.013). As the quality of reduction and stability of fixation are the most significant factors in determining outcomes of subtrochanteric femur fractures, this study shows that this technique is a valuable tool in an orthopaedist's armamentarium and present it as such.

Automatic intraoperative stitching of nonoverlapping cone-beam CT acquisitions

PURPOSE

Cone-beam computed tomography (CBCT) is one of the primary imaging modalities in radiation therapy, dentistry, and orthopedic interventions. While CBCT provides crucial intraoperative information, it is bounded by a limited imaging volume, resulting in reduced effectiveness. This paper introduces an approach allowing real-time intraoperative stitching of overlapping and nonoverlapping CBCT volumes to enable 3D measurements on large anatomical structures.

METHODS

A CBCT-capable mobile C-arm is augmented with a red-green-blue-depth (RGBD) camera. An offline cocalibration of the two imaging modalities results in coregistered video, infrared, and x-ray views of the surgical scene. Then, automatic stitching of multiple small, nonoverlapping CBCT volumes is possible by recovering the relative motion of the C-arm with respect to the patient based on the camera observations. We propose three methods to recover the relative pose: RGB-based tracking of visual markers that are placed near the surgical site, RGBD-based simultaneous localization and mapping (SLAM) of the surgical scene which incorporates both color and depth information for pose estimation, and surface tracking of the patient using only depth data provided by the RGBD sensor.

RESULTS

On an animal cadaver, we show stitching errors as low as 0.33, 0.91, and 1.72 mm when the visual marker, RGBD SLAM, and surface data are used for tracking, respectively.

CONCLUSIONS

The proposed method overcomes one of the major limitations of CBCT C-arm systems by integrating vision-based tracking and expanding the imaging volume without any intraoperative use of calibration grids or external tracking systems. We believe this solution to be most appropriate for 3D intraoperative verification of several orthopedic procedures.

A Prospective Randomized Study on Operative Treatment for Simple Distal Tibial Fractures-Minimally Invasive Plate Osteosynthesis Versus Minimal Open Reduction and Internal Fixation

OBJECTIVES

To compare the radiologic and clinical results of minimally invasive plate osteosynthesis (MIPO) and minimal open reduction and internal fixation (ORIF) for simple distal tibial fractures.

DESIGN

Randomized prospective study.

SETTING

Three level 1 trauma centers.

PATIENTS

Fifty-eight patients with simple and distal tibial fractures were randomized into a MIPO group (treatment with MIPO; n = 29) or a minimal group (treatment with minimal ORIF; n = 29). These numbers were designed to define the rate of soft tissue complication; therefore, validation of superiority in union time or determination of differences in rates of delayed union was limited in this study.

INTERVENTION

Simple distal tibial fractures treated with MIPO or minimal ORIF.

MAIN OUTCOME MEASUREMENTS

The clinical outcome measurements included operative time, radiation exposure time, and soft tissue complications. To evaluate a patient's function, the American Orthopedic Foot and Ankle Society ankle score (AOFAS) was used. Radiologic measurements included fracture alignment, delayed union, and union time.

RESULTS

All patients acquired bone union without any secondary intervention. The mean union time was 17.4 weeks and 16.3 weeks in the MIPO and minimal groups, respectively. There was 1 case of delayed union and 1 case of superficial infection in each group. The radiation exposure time was shorter in the minimal group than in the MIPO group. Coronal angulation showed a difference between both groups. The American Orthopedic Foot and Ankle Society ankle scores were 86.0 and 86.7 in the MIPO and minimal groups, respectively. Minimal ORIF resulted in similar outcomes, with no increased rate of soft tissue problems compared to MIPO.

CONCLUSIONS

Both MIPO and minimal ORIF have high union rates and good functional outcomes for simple distal tibial fractures. Minimal ORIF did not result in increased rates of infection and wound dehiscence.

LEVEL OF EVIDENCE

Therapeutic Level II. See Instructions for Authors for a complete description of levels of evidence.

Interlocking Intramedullary Nailing Versus Locked Dual-Plating Fixation for Femoral Shaft Fractures in Patients with Multiple Injuries: A Retrospective Comparative Study

PURPOSE

Intramedullary nailing (IMN) is a popular method in the management of femoral shaft fractures (FSFs). However, whether the association of IMN with pulmonary fat emboli can compromise the pulmonary and nervous systems is debatable. The purpose of this study is to compare IMN with the locked dual plating (LDP) method by assessing the clinical outcomes of FSF patients with head or chest injury.

METHOD

A total of 126 FSF patients were included in this study between January 2010 and July 2016 and divided into LDP and IMN groups. Patient demographic characteristics, operative time, blood loss, Harris Hip Score, Lysholm Knee Score, radiological outcomes, and systemic complications were collected and compared between the two treatment groups. Patients were followed up for at least 12 months.

RESULTS

The LDP group performed better than IMN in terms of operative time, estimated blood loss amount, and malunion rate. Differences in function scores, fracture union rate, overall pulmonary complication rate, and in-hospital mortality between the two groups were not significant. Average radiographic union time was significantly longer in the LDP group (36.3 weeks) than in the IMN group (32.5 weeks). One case of fixation failure occurred postoperatively in the LDP group, whereas one case of fracture nonunion took place in the IMN group.

CONCLUSION

Our findings suggest that dual-plating fixation is a promising method for FSFs with multiple injuries. However, the retrospective nature of this study necessitates high-quality trials to be performed to assess the clinical efficiency of dual plating.

Changes in the Treatment of Pediatric Femoral Fractures: 15-Year Trends From United States Kids' Inpatient Database (KID) 1997 to 2012

BACKGROUND

The options for treating femoral fractures in children and adolescents have evolved over the last 2 decades to include a variety of nonoperative and operative methods. The purpose of this study was to identify changes in the types of treatment for pediatric femoral fractures in the United States from 1997 to 2012.

METHODS

From discharge estimates for 1997, 2000, 2003, 2006, 2009, and 2012 in the Kids' Inpatient Database, data were extracted using the International Classification of Diseases, 9th revision, and Clinical Modification for pediatric femoral fracture treatments. Patients included were 0 to 17 years old and were categorized into 5 age groups: younger than 1, 1 to 4, 5 to 9, 10 to 14, and 15 to 17 years.

RESULTS

A total of 74,483 estimated discharges were recorded for pediatric patients with femoral fractures in the database for years 1997, 2000, 2003, 2006, 2009, and 2012. A total of 12,986 pediatric femoral fractures were estimated for 1997 and 9813 for 2012, which was statistically different (P<0.0001). Significantly fewer fractures were treated with closed reduction alone in 2012 than in 1997 in age groups 5 to 9, 10 to 14, and 15 to 17 years. Children aged 5 to 9 had more frequent open reduction and internal fixation in 2012 than in 1997, whereas adolescents aged 15 to 17 had less frequent open reduction and internal fixation in 2012 than in 1997.

CONCLUSIONS

Although the number of femoral shaft fractures overall has decreased, the frequency of operative treatment has increased significantly in patients 5 to 9 years of age. Knowledge of these trends can guide educational efforts and resource allocation, but further study is necessary to determine procedure-specific (eg, nailing, plating, external fixation) trends and their clinical and economic impacts.

LEVEL OF EVIDENCE

Level III-case series.

Healing of Atypical Subtrochanteric Femur Fractures After Cephalomedullary Nailing: Which Factors Predict Union?

OBJECTIVES

The purpose of this study was to determine the healing rate and time to union of atypical subtrochanteric fractures treated with cephalomedullary nailing.

DESIGN

Retrospective review, descriptive, and analytic study.

SETTING

Six level 1 trauma centers.

PATIENTS/PARTICIPANTS

The study included 42 patients with 48 displaced, atypical, bisphosphonate-associated subtrochanteric femur fractures who underwent surgical intervention.

INTERVENTION

Cephalomedullary femur nailing.

MAIN OUTCOME MEASUREMENT

The main outcome measures were radiologic healing and time to union.

RESULTS

The primary healing rate after cephalomedullary nailing of bisphosphonate-associated subtrochanteric femur fractures was 68.7% (33/48 patients). Mean time to union was 10.7 months. Malalignment was determined using the differences in neck-shaft angle (the difference between the normal side and the surgically repaired side) and sagittal angulation. These all proved to be significantly correlated with failure and delayed healing time. The cutoff points for neck-shaft angle, difference in neck-shaft angle, and sagittal angulation were 125.6, 4.4, and 5.5 degrees, respectively (receiver operating characteristic curve analysis).

CONCLUSIONS

The healing rate of atypical subtrochanteric femur fractures treated with cephalomedullary nailing is lower than that previously reported for atypical femur fractures. The quality of fracture reduction proved to be the most important factor in bony union and time to union.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.