A rapid high-performance liquid chromatographic method for the measurement of midazolam plasma concentrations during long-term infusion in ICU patients

Matrix effect and recovery terminology issues in regulated drug bioanalysis

Understanding the meaning of the terms used in the bioanalytical method validation guidance is essential for practitioners to implement best practice. However, terms that have several meanings or that have different interpretations exist within bioanalysis, and this may give rise to differing practices. In this perspective we discuss an important but often confusing term – ‘matrix effect (ME)’ – in regulated drug bioanalysis. The ME can be interpreted as either the ionization change or the measurement bias of the method caused by the nonanalyte matrix. The ME definition dilemma makes its evaluation challenging. The matrix factor is currently used as a standard method for evaluation of ionization changes caused by the matrix in MS-based methods. Standard additions to pre-extraction samples have been suggested to evaluate the overall effects of a matrix from different sources on the analytical system, because it covers ionization variation and extraction recovery variation. We also provide our personal views on the term ‘recovery’.

Benzodiazepines: sample preparation and HPLC methods for their determination in biological samples

Benzodiazepines (BDZs) belong to a group of substances known for their sedative, antidepressive, muscle relaxant, tranquilizer, hypnotic and anticonvulsant properties. Their determination in biological fluids is essential in clinical assays as well as in forensics and toxicological studies. Researchers focus on the development of rapid, accurate, precise and sensitive methods for the determination of BDZs and their metabolites. A large number of analytical methods using different techniques have been reported, but none can be considered as the method of choice. BDZs are usually present at trace levels (microgram or nanogram per milliliter) in a complex biological matrix and the potentially interfering compounds must be isolated by various extraction techniques before analysis. An extended and comprehensive review is presented herein, focusing on sample preparation (pretreatment and extraction) and HPLC conditions applied by different authors. These methods enable bioanalysts to achieve detection limits down to 1-2 ng/ml using UV/diode array detection, readily available in most laboratories, and better than 1 ng/ml using electron capture detection, which is lower than that obtained using a nitrogen phosphorus detector. MS interfaced with electrospray ionization offered a similar sensitivity, while negative chemical ionization MS or sonic spray ionization MS provided sensitivity down to 0.1 ng/ml.

Development and validation of a rapid and sensitive assay for simultaneous quantification of midazolam, 1'-hydroxymidazolam, and 4-hydroxymidazolam by liquid chromatography coupled to tandem mass-spectrometry

Midazolam is an ultra short acting benzodiazepine derivative and a specific probe for phenotyping cytochrome P450 (P450) 3A4/5 activity. A rapid, sensitive, and selective LC-MS/MS method was developed for simultaneous quantitation of midazolam and its metabolites (1'-hydroxymidazolam and 4-hydroxymidazolam). Deuterated (D5) analog of midazolam was utilized as an internal standard. Sample preparation either from human plasma (100 microL) or liver microsomal incubations involved a simple protein precipitation using acetonitrile (900 microL) with an average recovery of >90% for all compounds. The chromatographic separation was achieved using Zorbax-SB Phenyl, Rapid Resolution HT (2.1 mm x 100 mm, 3.5 microm) and a gradient elution with 10 mM ammonium acetate in 10% methanol (A) and acetonitrile (B). The flow rate was 0.25 mL/min and total run time was 5.5 min. Calibration curves were linear over the concentration range of 0.100-250 ng/mL. The lower limit of quantitation (LLOQ) was 0.1 ng/mL for all three analytes. The accuracy and precision, estimated at LLOQ and three concentration levels of quality control samples in six replicates, were within 85-115%. In conclusion, a robust, simple and highly sensitive analytical method was developed and validated for the analysis of midazolam and its metabolites. This method is suitable for characterizing the P450 3A4/5 activity in vitro or in human pharmacokinetic studies allowing administration of smaller doses of midazolam.

HPLC determination of midazolam and its three hydroxy metabolites in perfusion medium and plasma from rats

A new, simple, rapid, sensitive, and repeatable isocratic reverse-phase HPLC method was developed and validated for simultaneous determination of midazolam and its main three hydroxylated metabolites, i.e. 1'-hydroxymidazolam, 4-hydroxymidazolam, and 1',4-dihydroxymidazolam in rat liver perfusate and also plasma. Diazepam was used as an internal standard to ensure precision and accuracy of this method. Analytes were extracted from alkalinized samples into diethyl ether using single-step liquid-liquid extraction. A C18 analytical column and a mobile phase composed of acetonitrile and sodium acetate buffer were used for the chromatographic separation with UV detection. Limits of detection varied between 7.9 and 19.6 microg/L for midazolam and its hydroxy metabolites. The overall recovery for the analytes exceeded 92%, for concentrations twice the limits of detection. The intra- and inter-day precision at three different concentrations never exceeded 8 and 11% variation, respectively. This method is applicable for modeling and description of possible pharmacological interactions on rat (CYP3A1/2) or human (CYP3A4/5) cytochrome P450 enzymes.

Clinical Pharmacokinetic Monitoring of Midazolam in Critically Ill Patients

Midazolam is a commonly used sedative in critically ill, mechanically ventilated patients in intensive care unit (ICU) settings worldwide. We used a nine-step decision-making algorithm to determine whether therapeutic monitoring of midazolam in the ICU is warranted. Midazolam has a higher clearance and shorter half-life than other benzodiazepines, and prolonged sedation is achieved with continuous infusion. There appears to be very good correlation between plasma concentrations of both midazolam and its active metabolite, alpha1-hydroxymidazolam, and the degree of sedation. However, due to high interpatient variability, it is not possible to predict the level of sedation in any given individual based on plasma concentration of midazolam or its metabolites. Moreover, no simple and practical assay is available to quantitate midazolam plasma concentrations in the acute ICU setting. Many scales are available to assess the sedative effects of midazolam. Because the plasma concentration of midazolam required to achieve a constant level of sedation is highly variable, it is usually more prudent for the clinician to monitor for sedation with a validated clinical scale than by plasma concentrations alone. Various physiologic parameters, including age-related effects, compromised renal function, and liver dysfunction affect the pharmacokinetics of midazolam and alpha1-hydroxymidazolam. Although routine drug monitoring for all critically ill patients receiving midazolam is not recommended, this practice is likely beneficial in patients with neurologic damage in whom sedation cannot be assessed and in patients who have renal failure with a prolonged time to awakening.

Simultaneous determination of midazolam and 1′-hydroxymidazolam in human plasma by liquid chromatography with tandem mass spectrometry

A sensitive and simple liquid chromatography-tandem mass spectrometry method for the determination of midazolam and 1'-hydroxymidazolam in human plasma has been developed and validated with a dynamic range of 0.1-250 ng/mL. The analysis was based on semi-automated liquid-liquid extraction followed by evaporation of the extraction solvent, reconstitution and chromatography on a reversed-phase C(18) column. The mobile phase consists of 5 mm ammonium acetate and methanol and runs in gradient at a flow rate of 0.25 mL/min with column temperature of approximately 20 degrees C. The entire column effluent was transferred into the LC-MS/MS interface operated in positive electrospray ionization mode. The chromatographic run time was 4.3 min per injection, with retention times for midazolam, 1'-hydroxymidazolaml and the internal standard, triazolam, of 2.5, 2.3 and 2.1 min, respectively. The intra-day and inter-day precision (RSD %) and accuracy (bias %) of the quality control samples were <15.0% and within +/-13%, respectively. The current method has been applied to a clinical drug-drug interaction study in human.

Sensitive determination of midazolam and 1′-hydroxymidazolam in plasma by liquid–liquid extraction and column-switching liquid chromatography with ultraviolet absorbance detection and its application for measuring CYP3A activity

This manuscript described a new sensitive determination of midazolam and its metabolite 1'-hydroxymidazolam by automated column-switching high-performance liquid chromatography. The test compounds were extracted from 2 ml of plasma using chloroform-hexane (30:70, v/v) and the extract was injected into a column I (TSK-PW precolumn, 10 microm, 35 mm x 4.6 mm i.d.) for clean-up and column II (C18 STR ODS-II analytical column (5 microm, 150 mm x 4.6 mm i.d.) for separation. The mobile phase for separation consisted of phosphate buffer (0.02 M, pH 4.6), perchloric acid (60%) and acetonitrile (57.9:0.1:42, v/v/v) and was delivered at a flow-rate of 0.6 ml/min. The peak was detected using a UV detector set at 254 nm. The method was validated for the concentration range 0.3-100 ng/ml, and good linearity (r > 0.998) was confirmed. Intra- and inter-day coefficient variations for midazolam and 1'-hydroxymidazolam were less than 8.5 and 6.1%, respectively, at the concentrations of 0.5, 5 and 50 ng/ml for the test compounds. Relative errors ranged from -14 to 6% and mean recoveries were 78-85%. The limit of quantification was 0.5 ng/ml for each compound. This method was sensitive enough for pharmacokinetic studies measuring CYP3A activity in human volunteers following an intravenous (1 mg) and a single-oral administration (2 mg) of a subtherapeutic midazolam dose.

In-process control of midazolam synthesis by HPLC

A high-performance liquid chromatographic assay coupled with UV detection (239 nm) has been developed for the determination of midazolam and its synthesis precursors. The separation of the analytes was performed on a Kromasil C8 column (15 cm x 4.6 mm i.d., 5 microm) at 30 degrees C. The mobile phase [ammonium chloride (pH 5.5, 1 g l(-1))-methanolacetonitrile (45:22:33, v/v/v)] was pumped at a flow-rate of 1.5 ml min(-1). This method is rapid (less than 11 min), sensitive (limit of detection (LOD) ranged between 0.05 and 0.5 mg l(-1)) and selective for the determination of midazolam, and it could be used for monitoring different synthetic routes.

Analysis of certain tranquilizers in biological fluids

A review with 282 references is presented that deals with the reported methods of analysis of phenothiazines, thioxanthenes, and benzodiazepine derivatives of pharmaceutical interest. The review includes the methods adapted in biological fluids.

Determination of midazolam in human plasma by solid-phase microextraction and gas chromatography/mass spectrometry

A new method is described for the qualitative and quantitative analysis of midazolam, a short-acting 1,4-imidazole benzodiazepine, in human plasma. It involves a plasma deproteinization step, solid-phase microextraction (SPME) of midazolam using an 85-microm polyacrylate fiber, and its detection by gas chromatography/mass spectrometry (GC/MS) in selected ion monitoring (SIM) mode, using pinazepam as internal standard. The assay is linear over a midazolam plasma range of 1.5-300 ng/mL, relative intra- and inter-assay standard deviations at 5 ng/mL are below 7%, and the limit of detection is 1 ng/mL. The method is simple, fast and sufficiently sensitive to be applied in clinical and forensic toxicology as well as for purposes of therapeutic drug monitoring.