LM-PCR permits highly representative whole genome amplification of DNA isolated from small number of cells and paraffin-embedded tumor tissue sections

Molecular analysis of DNA in blastocoele fluid using next-generation sequencing

BACKGROUND

Preimplantation genetic testing (PGT) requires an invasive biopsy to obtain embryonic material for genetic analysis. The availability of a less invasive procedure would increase the overall efficacy of PGT. The aim of the study was to explore the potential of blastocoele fluid (BF) as an alternative source of embryonic DNA for PGT.

METHODS

Collection of BF was performed by aspiration with a fine needle prior to vitrification. BF DNA was subjected to whole-genome amplification (WGA) and analyzed by high-resolution next-generation sequencing (NGS).

RESULTS

A high-quality WGA product was obtained from 8 of 11 (72.7 %) samples. Comparison of matching BF and blastomere samples showed that the genomic representation of sequencing reads was consistently similar with respect to density and regional coverage across the 24 chromosomes. A genome-wide survey of the sample sequencing data also indicated that BF was highly representative of known single gene sequences, and this observation was validated by PCR analyses of ten randomly selected genes, with an overall efficiency of 84 %.

CONCLUSION

This study provides further evidence that BF is a promising alternative source of DNA for PGT.

A novel whole genome amplification method using type IIS restriction enzymes to create overhangs with random sequences

Ligation-mediated polymerase chain reaction (LM-PCR) is a whole genome amplification (WGA) method, for which genomic DNA is cleaved into numerous fragments and then all of the fragments are amplified by PCR after attaching a universal end sequence. However, the self-ligation of these fragments could happen and may cause biased amplification and restriction of its application. To decrease the self-ligation probability, here we use type IIS restriction enzymes to digest genomic DNA into fragments with 4-5nt long overhangs with random sequences. After ligation to an adapter with random end sequences to above fragments, PCR is carried out and almost all present DNA sequences are amplified. In this study, whole genome of Vibrio parahaemolyticus was amplified and the amplification efficiency was evaluated by quantitative PCR. The results suggested that our approach could provide sufficient genomic DNA with good quality to meet requirements of various genetic analyses.

Comparison of whole genome amplification methods for analysis of DNA extracted from microdissected early breast lesions in formalin-fixed paraffin-embedded tissue

To understand cancer progression, it is desirable to study the earliest stages of its development, which are often microscopic lesions. Array comparative genomic hybridization (aCGH) is a valuable high-throughput molecular approach for discovering DNA copy number changes; however, it requires a relatively large amount of DNA, which is difficult to obtain from microdissected lesions. Whole genome amplification (WGA) methods were developed to increase DNA quantity; however their reproducibility, fidelity, and suitability for formalin-fixed paraffin-embedded (FFPE) samples are questioned. Using aCGH analysis, we compared two widely used approaches for WGA: single cell comparative genomic hybridization protocol (SCOMP) and degenerate oligonucleotide primed PCR (DOP-PCR). Cancer cell line and microdissected FFPE breast cancer DNA samples were amplified by the two WGA methods and subjected to aCGH. The genomic profiles of amplified DNA were compared with those of non-amplified controls by four analytic methods and validated by quantitative PCR (Q-PCR). We found that SCOMP-amplified samples had close similarity to non-amplified controls with concordance rates close to those of reference tests, while DOP-amplified samples had a statistically significant amount of changes. SCOMP is able to amplify small amounts of DNA extracted from FFPE samples and provides quality of aCGH data similar to non-amplified samples.

Non-invasive prenatal detection of trisomy 21 using tandem single nucleotide polymorphisms

Background

Screening tests for Trisomy 21 (T21), also known as Down syndrome, are routinely performed for the majority of pregnant women. However, current tests rely on either evaluating non-specific markers, which lead to false negative and false positive results, or on invasive tests, which while highly accurate, are expensive and carry a risk of fetal loss. We outline a novel, rapid, highly sensitive, and targeted approach to non-invasively detect fetal T21 using maternal plasma DNA.

Methods and Findings

Highly heterozygous tandem Single Nucleotide Polymorphism (SNP) sequences on chromosome 21 were analyzed using High-Fidelity PCR and Cycling Temperature Capillary Electrophoresis (CTCE). This approach was used to blindly analyze plasma DNA obtained from peripheral blood from 40 high risk pregnant women, in adherence to a Medical College of Wisconsin Institutional Review Board approved protocol. Tandem SNP sequences were informative when the mother was heterozygous and a third paternal haplotype was present, permitting a quantitative comparison between the maternally inherited haplotype and the paternally inherited haplotype to infer fetal chromosomal dosage by calculating a Haplotype Ratio (HR). 27 subjects were assessable; 13 subjects were not informative due to either low DNA yield or were not informative at the tandem SNP sequences examined. All results were confirmed by a procedure (amniocentesis/CVS) or at postnatal follow-up. Twenty subjects were identified as carrying a disomy 21 fetus (with two copies of chromosome 21) and seven subjects were identified as carrying a T21 fetus. The sensitivity and the specificity of the assay was 100% when HR values lying between 3/5 and 5/3 were used as a threshold for normal subjects.

Conclusions

In summary, a targeted approach, based on calculation of Haplotype Ratios from tandem SNP sequences combined with a sensitive and quantitative DNA measurement technology can be used to accurately detect fetal T21 in maternal plasma when sufficient fetal DNA is present in maternal plasma.

Whole Genome Amplification on DNA from Filter Paper Blood Spot Samples: An Evaluation of Selected Systems

As the number of single-nucleotide polymorphism (SNP) screening and other mutation scanning studies have increased explosively, following the development of high-throughput instrumentation, it becomes even more important to have sufficient template DNA. The source of DNA is often limited, especially in epidemiological studies, which require many samples as well as enough DNA to perform numerous SNP screenings or mutation scannings. Therefore, the aim is to solve the problem of stock DNA limitation. This need has been an important reason for the development of whole genome amplification (WGA) methods. Several systems are based on Phi29 polymerase multiple displacement amplification (MDA) or on DNA fragmentation (OmniPlex). Using TaqMan SNP genotyping assays, we have tested four WGA systems -- AmpliQ Genomic Amplifier Kit, GenomiPhi, Repli-g, and GenomePlex -- on DNA extracted from Guthrie cards to evaluate the amplification bias, concordance- and call rates, cost efficiency, and flexibility. All systems successfully amplified picograms of DNA from Guthrie cards to micrograms of product without loss of heterozygosity and with minimal allelic bias. A modified AmpliQ set up was chosen for further evaluation. In all, 2,000 SNP genotyping results from amplified and nonamplified samples were compared and the concordance rates between the samples were 99.7%. The call rate using the TaqMan system was 99.8%. DNA extracted from Guthrie cards and amplified with one of the four evaluated WGA systems is applicable in epidemiological genetic screenings. System choice should be based on requirements for system flexibility, product yield, and use in subsequent analysis.

Application of array CGH on archival formalin-fixed paraffin-embedded tissues including small numbers of microdissected cells

Array-based comparative genomic hybridisation (aCGH) has diverse applications in cancer gene discovery and translational research. Currently, aCGH is performed primarily using high molecular weight DNA samples and its application to formalin-fixed and paraffin-embedded (FFPE) tissues remains to be established. To explore how aCGH can be reliably applied to archival FFPE tissues and whether it is possible to apply aCGH to small numbers of cells microdissected from FFPE tissue sections, we have systematically performed aCGH on 15 pairs of matched frozen and FFPE astrocytic tumour tissues using a well-established in-house human 1 Mb BAC/PAC genomic array. By spiking tumour DNA with normal DNA, we demonstrated that at least 70% of tumour DNA was required for reliable aCGH analysis. Using aCGH data from frozen tissue as a reference, it was found that only FFPE astrocytic tumour tissues that supported PCR amplification of >300 bp DNA fragment provided high quality, reproducible aCGH data. The presence of necrosis in a tissue specimen had an adverse effect on the quality of aCGH, while fixation in formalin for up to 96 h of fresh tissue did not appear to affect the quality of the result. As little as 10-20 ng DNA from frozen or FFPE tissues could be readily used for aCGH analysis following whole genome amplification (WGA). Furthermore, as few as 2000 microdissected cells from haematoxylin-stained slides of archival FFPE tissues could be successfully used for aCGH investigations when WGA was used. By careful assessment of DNA integrity and review of histology, to exclude necrosis and select specimens with a high proportion of tumour cells, it is feasible to preselect archival FFPE tissues adequate for aCGH analysis. With the help of microdissection and WGA, it is also possible to apply aCGH to histologically defined lesions, such as carcinoma in situ.

[11] Sample Labeling: An Overview

It is not easy to write a critical review of the methods available for labeling RNA and DNA "extracts" for microarray studies. There are a number of reasons for this: Suppliers of the reagents and kits used for this purpose do research and development, quality control, and validation and then they provide a hard-wired, "optimized" product. They often give few details about the compositions of these products, are inclined to put the best face they can on what they sell and gloss over any deficiencies, and have no interest in paying for direct comparisons of their product to those of other companies. These comparisons can be expensive to perform, and there are few good examples in the literature. When comparative experiments have been done, it is not clear that each of the individual methods tested was executed with equal proficiency. Many experiments can be required to determine how best to hybridize any given labeled extract to a particular array and how to block, wash, and postprocess (e.g., stain) the array so that the signal-to-noise ratio is maximized. In addition, authors of comparative studies used different arrays, technical protocols (some of which are out of date), experimental designs, and analyses. Finally, some new techniques, which seem quite promising, have been employed so little that their strengths and shortcomings are difficult to assess.

Comparative genomic hybridization

Altering DNA copy number is one of the many ways that gene expression and function may be modified. Some variations are found among normal individuals ( 14, 35, 103 ), others occur in the course of normal processes in some species ( 33 ), and still others participate in causing various disease states. For example, many defects in human development are due to gains and losses of chromosomes and chromosomal segments that occur prior to or shortly after fertilization, whereas DNA dosage alterations that occur in somatic cells are frequent contributors to cancer. Detecting these aberrations, and interpreting them within the context of broader knowledge, facilitates identification of critical genes and pathways involved in biological processes and diseases, and provides clinically relevant information. Over the past several years array comparative genomic hybridization (array CGH) has demonstrated its value for analyzing DNA copy number variations. In this review we discuss the state of the art of array CGH and its applications in medical genetics and cancer, emphasizing general concepts rather than specific results.

Array-based comparative genomic hybridization from formalin-fixed, paraffin-embedded breast tumors

Identification of prognostic and predictive genomic markers requires long-term clinical follow-up of patients. Extraction of high-quality DNA from archived formalin-fixed, paraffin-embedded material is essential for such studies. Of particular importance is a robust reproducible method of whole genome amplification for small tissue samples. This is especially true for high-resolution analytical approaches because different genomic regions and sequences may amplify differentially. We have tested a number of protocols for DNA amplification for array-based comparative genomic hybridization (CGH), in which relative copy number of the entire genome is measured at 1 to 2 mb resolution. Both random-primed amplification and degenerate oligonucleotide-primed amplification approaches were tested using varying amounts of fresh and paraffin-extracted normal and breast tumor input DNAs. We found that random-primed amplification was clearly superior to degenerate oligonucleotide-primed amplification for array-based CGH. The best quality and reproducibility strongly depended on accurate determination of the amount of input DNA using a quantitative polymerase chain reaction-based method. Reproducible and high-quality results were attained using 50 ng of input DNA, and some samples yielded quality results with as little as 5 ng input DNA. We conclude that random-primed amplification of DNA isolated from paraffin sections is a robust and reproducible approach for array-based CGH analysis of archival tumor samples.

Array comparative genomic hybridization and its applications in cancer

Alteration in DNA copy number is one of the many ways in which gene expression and function may be modified. Some variations are found among normal individuals, others occur in the course of normal processes in some species and still others participate in causing various disease states. For example, many defects in human development are due to gains and losses of chromosomes and chromosomal segments that occur before or shortly after fertilization, and DNA dosage-alteration changes occurring in somatic cells are frequent contributors to cancer. Detecting these aberrations and interpreting them in the context of broader knowledge facilitates the identification of crucial genes and pathways involved in biological processes and disease. Over the past several years, array comparative genomic hybridization has proven its value for analyzing DNA copy-number variations. Here, we discuss the state of the art of array comparative genomic hybridization and its applications in cancer, emphasizing general concepts rather than specific results.

Genome amplification of single sperm using multiple displacement amplification

Sperm typing is an effective way to study recombination rate on a fine scale in regions of interest. There are two strategies for the amplification of single meiotic recombinants: repulsion-phase allele-specific PCR and whole genome amplification (WGA). The former can selectively amplify single recombinant molecules from a batch of sperm but is not scalable for high-throughput operation. Currently, primer extension pre-amplification is the only method used in WGA of single sperm, whereas it has limited capacity to produce high-coverage products enough for the analysis of local recombination rate in multiple large regions. Here, we applied for the first time a recently developed WGA method, multiple displacement amplification (MDA), to amplify single sperm DNA, and demonstrated its great potential for producing high-yield and high-coverage products. In a 50 mul reaction, 76 or 93% of loci can be amplified at least 2500- or 250-fold, respectively, from single sperm DNA, and second-round MDA can further offer >200-fold amplification. The MDA products are usable for a variety of genetic applications, including sequencing and microsatellite marker and single nucleotide polymorphism (SNP) analysis. The use of MDA in single sperm amplification may open a new era for studies on local recombination rates.