RSA-measured inducible micromotion and interface modeling with finite element methods

Primary stability of a proximally coated and tapered stem

AIMS

The aim of this prospective cohort study was to evaluate the early migration of the TriFit cementless proximally coated tapered femoral stem using radiostereometric analysis (RSA).

METHODS

A total of 21 patients (eight men and 13 women) undergoing primary total hip arthroplasty (THA) for osteoarthritis of the hip were recruited in this study and followed up for two years. Two patients were lost to follow-up. All patients received a TriFit stem and Trinity Cup with a vitamin E-infused highly cross-linked ultra-high molecular weight polyethylene liner. Radiographs for RSA were taken postoperatively and then at three, 12, and 24 months. Oxford Hip Score (OHS), EuroQol five-dimension questionnaire (EQ-5D), and adverse events were reported.

RESULTS

At two years, the mean subsidence of the head and tip for the TriFit stem was 0.38 mm (SD 0.32) and 0.52 mm (SD 0.36), respectively. The total migration of the head and tip was 0.55 mm (SD 0.32) and 0.71 mm (SD 0.38), respectively. There were no statistically significant differences between the three to 12 months' migration (p = 0.105) and 12 to 24 months' migration (p = 0.694). The OHS and EQ-5D showed significant improvements at two years.

CONCLUSION

The results of this study suggest that the TriFit femoral stem achieves initial stability and is likely to be stable in the mid and long term. A long-term outcome study is required to assess late mechanisms of failure and the effects of bone mineral density (BMD) related changes. Cite this article: Bone Joint J 2021;103-B(4):644-649.

Evaluating Length: The Use of Low-dose Biplanar Radiography (EOS) and Tantalum Bead Implantation

BACKGROUND

Low-dose biplanar radiography (EOS) is an appealing imaging modality for use in children given its low radiation and ease of use. The goal of this study was to determine the accuracy and reliability of EOS compared with CT scanogram for measurement of leg length and to assess interrater and intrarater reliability of measured interbead distances for EOS and CT scanogram after insertion of tantalum beads into lamb femurs.

METHODS

Tantalum beads (0.8 mm) were inserted into the cortex on both the medial and lateral sides of 10 skeletally immature lamb femurs. CT scanogram and EOS imaging were obtained. Measurements of total length and distance between bead pairs were recorded on anteroposterior and lateral views by 2 orthopaedic surgeons on 2 separate occasions. Pearson correlations were performed for statistical comparisons.

RESULTS

EOS measurements showed near-perfect correlation to those of CT scanogram (r>0.96, P<0.001). Intrarater reliability was excellent for all measurements with EOS (r>0.98, P<0.001) and CT scanogram (r>0.99, P<0.001) as was interrater reliability for EOS (r>0.98, P<0.001) and CT scanogram (r>0.99, P<0.001).

CONCLUSIONS

EOS is comparable with CT scanogram in the assessment of limb length and the distance between 2 radiopaque markers. Reliability was excellent for all measurements. The combination of EOS imaging and tantalum bead implantation may be an effective way to evaluate physeal growth following procedures such as epiphysiodesis and physeal bar resection.

LEVEL OF EVIDENCE

Level II—diagnostic

Adherence of hip and knee arthroplasty studies to RSA standardization guidelines. A systematic review

BACKGROUND AND PURPOSE

Guidelines for standardization of radiostereometry (RSA) of implants were published in 2005 to facilitate comparison of outcomes between various research groups. In this systematic review, we determined how well studies have adhered to these guidelines.

METHODS

We carried out a literature search to identify all articles published between January 2000 and December 2011 that used RSA in the evaluation of hip or knee prosthesis migration. 2 investigators independently evaluated each of the studies for adherence to the 13 individual guideline items. Since some of the 13 points included more than 1 criterion, studies were assessed on whether each point was fully met, partially met, or not met.

RESULTS

153 studies that met our inclusion criteria were identified. 61 of these were published before the guidelines were introduced (2000-2005) and 92 after the guidelines were introduced (2006-2011). The methodological quality of RSA studies clearly improved from 2000 to 2011. None of the studies fully met all 13 guidelines. Nearly half (43) of the studies published after the guidelines demonstrated a high methodological quality and adhered at least partially to 10 of the 13 guidelines, whereas less than one-fifth (11) of the studies published before the guidelines had the same methodological quality. Commonly unaddressed guideline items were related to imaging methodology, determination of precision from double examinations, and also mean error of rigid-body fitting and condition number cutoff levels.

INTERPRETATION

The guidelines have improved methodological reporting in RSA studies, but adherence to these guidelines is still relatively low. There is a need to update and clarify the guidelines for clinical hip and knee arthroplasty RSA studies.

Development of a Model-Based Roentgen Stereophotogrammetric Analysis System to Measure Polyethylene Wear in Unicompartmental Arthroplasty

One of the most important causes of failure in unicompartmental knee replacement (UKR) is polyethylene wear. The aim of this study was to develop and assess a novel Roentgen stereophotogrammetric analysis (RSA)-based method for the measurement of linear wear suitable for UKR.

Model-based RSA was used to estimate the linear wear of polyethylene bearings in UKR. A phantom was used to validate the method using in vitro measured bearing thicknesses and the linear wear of ten control bearings was estimated in vivo. Computer aided design (CAD) models for the UKRs were used in the model-based RSA system.

There was no statistically significant difference between the estimated and measured bearing thicknesses using the CAD models ( p = 0.386). The precision of the linear wear measurement, expressed as the standard deviation of the difference between the estimated and measured bearing thickness was 0.163 mm. The bias (mean difference) was 0.030 mm.

The use of RSA to measure in vivo wear in a UKR has been shown to be accurate in a phantom, and has been verified with in vivo measured controls. The technique does not require surgical implantation of marker balls and can be used retrospectively.

Correlation of radiostereometric measured cervical range of motion with clinical radiographic findings after anterior cervical discectomy and fusion

STUDY DESIGN

Prospective clinical study.

OBJECTIVE

To evaluate the correlation between clinical radiographic findings and sagittal range of motion (ROM) measured using radiostereometric analysis (RSA) after anterior cervical discectomy and fusion (ACDF).

SUMMARY OF BACKGROUND DATA

Evaluation of fusion after ACDF continues to be difficult. Radiographic films including flexion/extension views are routinely used for this purpose. Unfortunately, routine radiographs are insensitive in demonstrating pseudarthrosis. RSA is an accurate technique that can be used in evaluation of segmental motion in vivo and can potentially be used in evaluation of spinal fusion.

METHODS

Sixteen patients who underwent multi-level ACDF were enrolled in this study. The procedure was performed in the routine fashion; cervical plates were utilized in each case. Intraoperatively, 3 to 5 tantalum beads were inserted into each vertebral body. At the 1-year follow-up period, sagittal ROM of the operated segments was measured with RSA. In addition, each segment was clinically evaluated for evidence of radiographic fusion by using a 3-point grading system (fused, uncertain, pseudarthrosis) and by measuring the interspinous widening on flexion/extension films. The correlation between the radiographic findings and RSA measured sagittal ROM was evaluated.

RESULTS

Fourteen 2-level and two 3-level procedures representing 31 motion segments were analyzed. The average sagittal ROM of all segments as measured by RSA was 1.3 +/- 1.4 degrees . The sagittal ROM of the segments with less than 2 mm of interspinous widening on clinical flexion/extension radiographs was measured at 1.1 degrees +/- 1.0 degrees with RSA, whereas the sagittal ROM of the segments with greater than 2 mm of interspinous widening was measured at 3.4 degrees +/- 2.9 degrees ; a significant correlation was noted between the 2-point grading method and the sagittal ROM (Pearson coefficient, r = 0.504, P = 0.004). Using the 3-point grading system, there were 20 levels graded as fused (0.8 degrees +/- 0.9 degrees ), 6 levels were graded as uncertain (1.7 degrees +/- 1.0 degrees ), and 4 levels were graded as pseudarthrosis (3.5 degrees +/- 2.7 degrees ). The pseudarthrosis group showed significantly greater motion than the fusion group (P = 0.005); a significant correlation was noted between the 3-point grading method and the sagittal ROM (Pearson coefficient, r = 0.561, P = 0.001).

CONCLUSION

In this study, we evaluated the utility of RSA in evaluating segmental motion after ACDF and demonstrated a significant difference between segments that demonstrated radiographic evidence of fusion when compared with segments that demonstrated evidence of pseudarthrosis. RSA appears to be a quantitative technique capable of assisting in the evaluation of fusion.

Effect of modular neck variation on bone and cement mantle mechanics around a total hip arthroplasty stem

BACKGROUND

Total hip arthroplasty carried out using cemented modular-neck implants provides the surgeon with greater intra-operative flexibility and allows more controlled stem positioning.

METHODS

In this study, finite element models of a whole femur implanted with either the Exeter or with anew cemented modular-neck total hip arthroplasty (separate, neck and stem components) were developed.The changes in bone and cement mantle stress/strain were assessed for varying amounts of neck offset and version angle for the modular-neck device for two simulated physiological load cases: walking and stair climbing. Since the Exeter is the gold standard for polished cemented total hip arthroplasty stem design, bone and cement mantle stresses/strains in the modular-neck finite element models were compared with finite element results for the Exeter.

FINDINGS

For the two physiological load cases, stresses and strains in the bone and cement mantle were similar for all modular-neck geometries. These results were comparable to the bone and cement mechanics surrounding the Exeter. These findings suggest that the Exeter and the modular neck device distribute stress to the surrounding bone and cement in a similar manner.

INTERPRETATION

It is anticipated that the modular-neck device will have a similar short-term clinical performance to that of the Exeter, with the additional advantages of increased modularity.