Vertical Bone Augmentation: Where Are We Now?

Guided Bone Regeneration Using Barrier Membrane in Dental Applications

Guided bone regeneration (GBR) is a widely used technique in preclinical and clinical studies due to its predictability. Its main purpose is to prevent the migration of soft tissue into the osseous wound space, while allowing osseous cells to migrate to the site. GBR is classified into two main categories: resorbable and non-resorbable membranes. Resorbable membranes do not require a second surgery but tend to have a short resorption period. Conversely, non-resorbable membranes maintain their mechanical strength and prevent collapse. However, they require removal and are susceptible to membrane exposure. GBR is often used with bone substitute graft materials to fill the defect space and protect the bone graft. The membrane can also undergo various modifications, such as surface modification and biological factor loading, to improve barrier functions and bone regeneration. In addition, bone regeneration is largely related to osteoimmunology, a new field that focuses on the interactions between bone and the immune system. Understanding these interactions can help in developing new treatments for bone diseases and injuries. Overall, GBR has the potential to be a powerful tool in promoting bone regeneration. Further research in this area could lead to advancements in the field of bone healing. This review will highlight resorbable and non-resorbable membranes with cellular responses during bone regeneration, provide insights into immunological response during bone remodeling, and discuss antibacterial features.

Techniques on vertical ridge augmentation: Indications and effectiveness

Vertical ridge augmentation techniques have been advocated to enable restoring function and esthetics by means of implant-supported rehabilitation. There are three major modalities. The first is guided bone regeneration, based on the principle of compartmentalization by means of using a barrier membrane, which has been demonstrated to be technically demanding with regard to soft tissue management. This requisite is also applicable in the case of the second modality of bone block grafts. Nonetheless, space creation and maintenance are provided by the solid nature of the graft. The third modality of distraction osteogenesis is also a valid and faster approach. Nonetheless, owing to this technique's inherent shortcomings, this method is currently deprecated. The purpose of this review is to shed light on the state-of-the-art of the different modalities described for vertical ridge augmentation, including the indications, the step-by-step approach, and the effectiveness.

Immuno-histopathologic evaluation of mineralized plasmatic matrix in the management of horizontal ridge defects in a canine model (a split-mouth comparative study)

Our research aimed to investigate the effect of combining biphasic calcium phosphate (BCP) alloplast with mineralized plasmatic matrix (MPM) as compared with platelet-rich fibrin (PRF) on the quality and quantity of bone formation and maturation at surgically created horizontal critical-sized ridge defects (HRDs) in a canine model. We used a split-mouth design using the third and fourth mandibular premolars of the mongrel dogs. Twelve defects on the left side (experimental group, I) were managed with MPM composite mixed with BCP alloplast, MPM compact layer. On the right side (control group, II), another 12 defects were managed with PRF mixed with BCP alloplast, followed by the application of PRF compact strips. Finally, both were covered by a collagen membrane. Dogs were euthanized at 4, 8, and 12 weeks, and the studied defects were processed to evaluate treatment outcome, including mean percentage of bone surface area, collagen percentage, and osteopontin (OPN) immunoreaction. Our results revealed that the mean percentage of bone surface area was significantly increased in the experimental group treated with MPM at all time intervals as compared with the PRF group. Decreased collagen percentage and increased OPN immunoreactivity showed significant results in the MPM group as compared with PRF at 4 and 8 weeks postoperatively, respectively. In conclusion, MPM accelerates the formation of superior new bone quality when used in the treatment of HRDs.

Nanostructured Zn-Substituted Monetite Based Material Induces Higher Bone Regeneration Than Anorganic Bovine Bone and β-Tricalcium Phosphate in Vertical Augmentation Model in Rabbit Calvaria

The capacity of a nanostructured multicomponent material composed of Zn-substituted monetite, amorphous calcium phosphate, hydroxyapatite and silica gel (MSi) to promote vertical bone augmentation was compared with anorganic bovine bone (ABB) and synthetic β-tricalcium phosphate (β-TCP). The relation between biological behavior and physicochemical properties of the materials was also studied. The in vivo study was conducted in a vertical bone augmentation model in rabbit calvaria for 10 weeks. Significant differences in the biological behavior of the materials were observed. MSi showed significantly higher bone regeneration (39%) than ABB and β-TCP (24%). The filled cylinder volume was similar in MSi (92%) and ABB (91%) and significantly lower in β-TCP (81%) implants. In addition, β-TCP showed the highest amount of non-osteointegrated particles (17%). MSi was superior to the control materials because it maintains the volume of the defect almost full, with the highest bone formation, the lowest number of remaining particles, which are almost fully osteointegrated and having the lowest amount of connective tissue. Besides, the bone formed was mature, with broad trabeculae, high vascularization and osteogenic activity. MSi resorbs gradually over time with an evident increment of the porosity and simultaneous colonization for vascularized new bone. In addition, the osteoinductive behavior of MSi material was evidenced.

A novel experimental approach to evaluate guided bone regeneration (GBR) in the rat femur using a 3D-printed CAD/CAM zirconia space-maintaining barrier

Introduction

Obtaining a certain bone volume is an important goal in implantology or orthopedics. Thus, after tooth extraction, quite a lot of horizontal and vertical alveolar bone is lost in time and can be detrimental to the implant treatment outcome, while the treatment of critical bone defects is a considerable challenge for surgery.

Objectives

In this study we designed a new in vivo model as an useful experimental tool to assess guided bone regeneration (GBR) using a computer-aided design/manufacturing (CAD-CAM) space-maintaining barrier.

Methods

The barrier was 3D printed with three progressive heights, surgically placed on rat femur, and GBR results were analyzed at 2, 4, and 8 weeks by X-ray and bone mineral density analysis, histology/morphometry and by immunofluorescence and immunohistochemistry for osteogenesis and angiogenesis evaluation.

Results

The obtained results show that the proposed experimental model provides a real-time useful information on progressive bone tissue formation, which depends on the volume of isolated space created for GBR and on molecular events that lead to satisfactory vertical and horizontal bone augmentation and osteointegration.

Conclusion

In conclusion, the proposed customized three-dome space-maintaining barrier is suitable as an experimental tool to assess the potential of using the designed barriers in dentistry and orthopedics to promote the formation of new bone and determine their space- and time-dependent limitations. Meanwhile, guided bone augmentation for dentistry requires subsequent evaluation on an alveolar bone preclinical model followed by clinical implementation.

Osseous ingrowth in allogeneic bone blocks applied for vertical bone augmentation: a preclinical randomised controlled study

OBJECTIVES

The aim of the present study was the qualitative and quantitative evaluation of osseous graft consolidation using allogeneic bone blocks for vertical bone augmentation in an animal model.

MATERIAL AND METHODS

Standardised allogeneic and autologous bone blocks were fixed on the frontal skull of 20 adult female pigs and covered with a resorbable collagen membrane. Animals were sacrificed after 2 and 6 months. Specimens were histologically and histomorphometrically analysed focusing on the amount of vital bone, residual bone substitute material and connective tissue. Furthermore, the amount of expression of bone matrix proteins (collagen type I and osteocalcin) and de novo vessel formation (von Willebrand factor) were quantified by immunohistochemistry.

RESULTS

Significantly more allogeneic bone blocks failed for both evaluation time points (p < 0.05). Allogeneic blocks showed significantly less vital bone with more connective tissue formation compared to autologous bone blocks. Increased vessel formation could be detected for both evaluation time points in the contact area of autologous bone with local bone. The expression of collagen type I and osteocalcin was significantly lower in the allogeneic bone graft.

CONCLUSIONS

Allogeneic cancellous bone blocks showed a significantly higher failure rate compared to autologous bone blocks. Allogeneic bone blocks seemed to negatively affect bone formation or negatively influence the host in the long term, and increased connective tissue formation and block loss should be anticipated.

CLINICAL RELEVANCE

In order to maintain patient safety and treatment success clinicians should be persuaded to make a conscious choice of the applied biomaterials with regard to their components and structure.

Horizontal Ridge Augmentation and Contextual Implant Placement with a Resorbable Membrane and Particulated Anorganic Bovine Bone-Derived Mineral

Alveolar ridge deficiency is considered a major limitation for successful implant placement. Various approaches have been developed to horizontal augmentation of bone volume. This case report presents the medium-term results of one-stage guided bone augmentation using an anorganic bovine bone (70%) and autologous bone (30%), placed in layers, in association with resorbable collagen membrane for a subsequent implant placement. The patient presented with a localized horizontal ridge defect in the posterior zone of the jaw. The clinical and radiographic presentations, as well as relevant literature, are presented.

Resorbable Versus Nonresorbable Membranes: When and Why?

Guided bone-regeneration techniques use either resorbable or nonresorbable membrane. Ideal membrane material should be biocompatible with tissue integration, be able to create and maintain space, be occlusive with selective permeability, and have good handling properties. Commercially available nonresorbable membranes are Gor-tex (e-PTFE), Cytoplast (d-PTFE), and titanium mesh. Resorbable membranes are available as natural and synthetic. Clinical trials, a systematic review and meta-analysis have shown no statistically significant difference in most clinical indications between both types of membrane. The choice of membrane varies according to the choice of grafting materials and nature of defect.

Comparison of Different Bone Filling Materials and Resorbable Membranes by Means of Micro-Tomography. A Preliminary Study in Rabbits

The purpose of this work was to evaluate the behavior of different membranes and bone filling materials used to fill critical defects in rabbit calvaria. Four defects were prepared in the cranial calvaria of female rabbits. They were randomly divided into three subgroups according to the type of barrier membrane to be used. Four animals carried cross-linked bovine collagen membranes (Mem-Lok, Bio-Horizons, Birmingham, AL, USA)), four human fascia lata membranes (Tissue, Inbiomed SA, Córdoba, Argentina) and four human chorioamniotic membranes (Tissue. Inbiomed SA, Córdoba, Argentina). The defects were filled with the deproteinized bovine bone particulate Bio-Oss® (Geistlich-Pharma AG, Wolhusen, Switzerland), with particulate human hydroxyapatite MinerOss® (Bio-Horizons, Birmingham, AL, USA), with particulate dental material (Tissue Bank Foundation, Inbiomed S.A., Córdoba, Argentina), and the last one was left without the addition of filler material. In the first group of four specimens, a resorbable cross-linked bovine collagen membrane was placed over the skull and defects, without additional fixing. In the second group, a human fascia lata membrane was placed, without additional fixing. In the third group, a human chorioamniotic membrane was placed, without additional fixing. The animals were sacrificed at 4 and 8 weeks. The highest percentages of relative radiological density (average) were recorded considering the amnio-chorionic membranes (83.63%) followed by collagen (81.44%) and finally the fascia lata membranes (80.63%), but the differences were not statistically significant (p > 0.05). The sites grafted with a decellularized tooth (96.83%) and Bio-Oss (88.42%), recorded the highest percentages of radiological density but did not differ significantly from each other (subset 2). The three membranes used did not show statistical differences between them, in any of the two time periods used. There were statistical differences between the filling materials evidencing the presence of a large quantity of calcified material in the defects treated with particulate tooth and deproteinized bovine bone and while smaller amounts of calcified material were registered in the case of defects treated with human hydroxyapatite and those that were not treated.

Vertical ridge augmentation using guided bone regeneration procedure and dental pulp derived mesenchymal stem cells with simultaneous dental implant placement: A histologic study in a sheep model

OBJECTIVES

To determine the effects of bone graft and dental pulp derived mesenchymal stem cells (DPMSCs) implantation with simultaneous dental implant placement on osteointegration, newly formed bone and vertical bone height histologically and histomorphometrically in a sheep model.

MATERIAL AND METHODS

A total of 48 implants were divided into three groups. In Group I (n = 16), no material was placed around the implants. In Group II (n = 16), particulate deproteinized bovine bone graft (DBBG) was placed around the implant and in Group III (n = 16), 2 × 106 DPMSCs were placed around the implant with DBBG. All implants were covered with a 20 × 30 mm collagen membrane and the edges of the membrane were fixed with mini screws. The animals were sacrificed 3 and 6 weeks after surgery. Histologic and histomorphometric assessments were performed.

RESULTS

The area of newly formed bone in Groups I, II, and III were calculated as percentage 2.15 ± 0.22, 11.88 ± 0.77, and 14.50 ± 0.67 respectively after 3 weeks and 3.33 ± 0.37, 18.45 ± 0.33, and 29 ± 1.07 after 6 weeks, respectively (P < 0.05). Three weeks after dental implant placement, the vertical bone length was 0.17 ± 0.02 mm in Group I, 0.89 ± 0.068 mm in Group II and 0.96 ± 0.05 mm in Group III. After 6 weeks, these values were 0.28 ± 0.03 mm, 1.34 ± 0.08 mm, and 1.49 ± 0.08 mm, respectively. There was no significant difference between Groups II and III at 3 and 6 weeks in terms of vertical bone length.

CONCLUSION

Bone graft and DPMSCs application with dental implant have beneficial effects on newly formed bone and vertical bone height in this experimental sheep model.

CAD/CAM and 3D-Printing Applications for Alveolar Ridge Augmentation

Purpose of review

CAD/CAM and 3D-printing are emerging manufacturing technologies in dentistry. In the field of alveolar ridge augmentation, graft customization utilizing these technologies can result in significant reduction of surgical time. A review of the literature on materials, techniques and applications of CAD/CAM and 3D-printing available for alveolar ridge augmentation was performed.

Recent findings

CAD/CAM applications for milling of customized block grafts of allogeneic, xenogeneic, and alloplastic origins have been reported, and currently only limited products are commercially available. 3D-printing applications are limited to alloplastic graft materials and containment shells, and have been mostly used in animal studies for optimizing biomaterials' properties.

Summary

While current data support the potential use of CAD/CAM and 3D-printing for graft customization for alveolar ridge augmentation procedures, additional research is needed on predictability and long-term stability of the grafted sites.

Guided bone regeneration: materials and biological mechanisms revisited

Guided bone regeneration (GBR) is commonly used in combination with the installment of titanium implants. The application of a membrane to exclude non‐osteogenic tissues from interfering with bone regeneration is a key principle of GBR. Membrane materials possess a number of properties which are amenable to modification. A large number of membranes have been introduced for experimental and clinical verification. This prompts the need for an update on membrane properties and the biological outcomes, as well as a critical assessment of the biological mechanisms governing bone regeneration in defects covered by membranes. The relevant literature for this narrative review was assessed after a MEDLINE/PubMed database search. Experimental data suggest that different modifications of the physicochemical and mechanical properties of membranes may promote bone regeneration. Nevertheless, the precise role of membrane porosities for the barrier function of GBR membranes still awaits elucidation. Novel experimental findings also suggest an active role of the membrane compartment per se in promoting the regenerative processes in the underlying defect during GBR, instead of being purely a passive barrier. The optimization of membrane materials by systematically addressing both the barrier and the bioactive properties is an important strategy in this field of research.

Periosteal elevation induces supracortical peri-implant bone formation

PURPOSE

The aim of the study was to evaluate the possibility of supracortical peri-implant bone formation after periosteal elevation.

MATERIALS AND METHODS

Periosteal elevation with an elevation height of 5 or 10 mm was performed in an animal experiment with 24 female domestic pigs. For this purpose, four implants were inserted in the frontal bone of each animal. The implants protruded from the local bone by 5 or 10 mm. In the test groups, the periosteum was attached to the protruding implants. In the control groups, the implants were covered with biocompatible degradable periosteal-shielding devices. Each 8 animals were sacrificed after 20, 40 and 60 days. De novo bone formation was evaluated radiographically and histologically.

RESULTS

Bone formation rate was higher in the test groups compared to the control groups after 20, 40 and 60 days. After 40 and 60 days, a statistically significant higher (P < 0.01) bone formation rate was found for both elevation heights. The maximum height of the generated bone was statistically significantly higher (P < 0.01) in the test groups for both elevation heights, compared to the control groups for all time points investigated.

CONCLUSION

Periosteal elevation by dental implants is a treatment option for supracortical peri-implant bone formation.

Melatonin: A Review of Its Potential Functions and Effects on Dental Diseases

Melatonin is a hormone synthesised and secreted by the pineal gland and other organs. Its secretion, controlled by an endogenous circadian cycle, has been proven to exert immunological, anti-oxidant, and anti-inflammatory effects that can be beneficial in the treatment of certain dental diseases. This article is aimed at carrying out a review of the literature published about the use of melatonin in the dental field and summarising its potential effects. In this review article, an extensive search in different databases of scientific journals was performed with the objective of summarising all of the information published on melatonin use in dental diseases, focussing on periodontal diseases and dental implantology. Melatonin released in a natural way into the saliva, or added as an external treatment, may have important implications for dental disorders, such as periodontal disease, as well as in the osseointegration of dental implants, due to its anti-inflammatory and osseoconductive effects. Melatonin has demonstrated to have beneficial effects on dental pathologies, although further research is needed to understand the exact mechanisms of this molecule.

Novel bioceramic-reinforced hydrogel for alveolar bone regeneration

The osseointegration of dental implants and their consequent long-term success is guaranteed by the presence, in the extraction site, of healthy and sufficient alveolar bone. Bone deficiencies may be the result of extraction traumas, periodontal disease and infection. In these cases, placement of titanium implants is contraindicated until a vertical bone augmentation is obtained. This goal is achieved using bone graft materials, which should simulate extracellular matrix (ECM), in order to promote osteoblast proliferation and fill the void, maintaining the space without collapsing until the new bone is formed. In this work, we design, develop and characterize a novel, moldable chitosan-pectin hydrogel reinforced by biphasic calcium phosphate particles with size in the range of 100-300μm. The polysaccharide nature of the hydrogel mimics the ECM of natural bone, and the ceramic particles promote high osteoblast proliferation, assessed by Scanning Electron Microscopy analysis. Swelling properties allow significant adsorption of water solution (up to 200% of solution content) so that the bone defect space can be filled by the material in an in vivo scenario. The incorporation of ceramic particles makes the material stable at different pH and increases the compressive elastic modulus, toughness and ultimate tensile strength. Furthermore, cell studies with SAOS-2 human osteoblastic cell line show high cell proliferation and adhesion already after 72h, and the presence of ceramic particles increases the expression of alkaline phosphatase activity after 1week. These results suggest a great potential of the developed moldable biomaterials for the regeneration of the alveolar bone.

STATEMENT OF SIGNIFICANCE

The positive fate of a surgical procedure involving the insertion of a titanium screw still depends on the quality and quantity of alveolar bone which is present in the extraction site. Available materials are basically hard scaffold materials with un-predictable behavior in different condition and difficult shaping properties. In this work we developed a novel pectin-chitosan hydrogel reinforced with ceramic particles. Polysaccharides simulate the extracellular matrix of natural bone and the extensive in vitro cells culture study allows to assess that the incorporation of the ceramic particles promote a pro-osteogenic response. Shape control, easy adaption of the extraction site, predictable behavior in different environment condition, swelling properties and an anti-inflammatory response are the significant characteristics of the developed biomaterial.

Melatonin enhances vertical bone augmentation in rat calvaria secluded spaces

BACKGROUND

Melatonin has many roles, including bone remodeling and osseointegration of dental implants. The topical application of melatonin facilitated bone regeneration in bone defects. We evaluated the effects of topical application of melatonin on vertical bone augmentation in rat calvaria secluded spaces.

MATERIAL AND METHODS

In total, 12 male Fischer rats were used and two plastic caps were fixed in the calvarium. One plastic cap was filled with melatonin powder and the other was left empty.

RESULTS

Newly generated bone at bone defects and within the plastic caps was evaluated using micro-CT and histological sections. New bone regeneration within the plastic cap was increased significantly in the melatonin versus the control group.

CONCLUSIONS

Melatonin promoted vertical bone regeneration in rat calvaria in the secluded space within the plastic cap.

Bone Replacement Materials and Techniques Used for Achieving Vertical Alveolar Bone Augmentation

Alveolar bone augmentation in vertical dimension remains the holy grail of periodontal tissue engineering. Successful dental implant placement for restoration of edentulous sites depends on the quality and quantity of alveolar bone available in all spatial dimensions. There are several surgical techniques used alone or in combination with natural or synthetic graft materials to achieve vertical alveolar bone augmentation. While continuously improving surgical techniques combined with the use of auto- or allografts provide the most predictable clinical outcomes, their success often depends on the status of recipient tissues. The morbidity associated with donor sites for auto-grafts makes these techniques less appealing to both patients and clinicians. New developments in material sciences offer a range of synthetic replacements for natural grafts to address the shortcoming of a second surgical site and relatively high resorption rates. This narrative review focuses on existing techniques, natural tissues and synthetic biomaterials commonly used to achieve vertical bone height gain in order to successfully restore edentulous ridges with implant-supported prostheses.

Comparison of osteoconductive properties of three different β-tricalcium phosphate graft materials: a pilot histomorphometric study in a pig model

AIMS

The aim of this study was to compare the de novo bone formation ability and osteoconductive effects of three different β-tricalcium phosphate (β-TCP) graft materials. The micro-architectural parameters of the newly formed bone tissues were also compared among the different graft materials.

MATERIAL AND METHODS

Eight male Swiss domestic pigs were used in the study. Five bony defects were made with a trephine bur. Three of the defects were filled with Cerasorb®, Kasios® and Poresorb®. The fourth defect was filled with an autogenous bone graft. The last defect remained empty. All subjects were sacrificed after 8 weeks.

RESULTS

When compared to a negative control group, significant healing was observed in all the groups except the Cerasorb group. The osteoconductivity of the Poresorb group was better than that of the other groups (p < 0.05). The difference in the osteoconductivity of the Kasios and Cerasorb groups was statistically significant (p < 0.05). Comparison of the micro-architectural properties of newly formed bone tissues retrieved from the defects showed that those filled with Poresorb were the best.

CONCLUSION

β-TCP materials show different results in terms of the volume and characteristics of new bone formation, although they have a similar chemical structure.

Alveolar sandwich osteotomy in resorbed alveolar ridge for dental implants: a 4-year prospective study

PURPOSE

To answer whether severe vertical alveolar defects can be resolved using the sandwich osteotomy technique with xenograft material as filler and to evaluate the predictability of this procedure.

MATERIALS AND METHODS

Ten graft sites (5 mandibular and 5 maxillary) in 9 patients treated at the Department of Oral and Maxillofacial Surgery, Hadassah Medical Center, were included in the present study. The patients underwent vertical bone augmentation using the sandwich osteotomy technique filled with xenograft material. The degree of bone augmentation was analyzed clinically at surgery and 4 to 6 months later from the computed tomography images taken just before the sites had been rehabilitated using dental implant insertion. A trephine histologic analysis was performed during implantation at 1 maxillary site.

RESULTS

The mean vertical bone gain in the interval between the sandwich osteotomy and implementation was 6 mm (range 4 to 10), and it remained stable after 4 to 6 months. In 2 cases, additional horizontal bone augmentation was needed. All graft sites were rehabilitated using dental implants with satisfactory results. In 3 cases, gingival porcelain was required for the final prosthesis. Histologic examination revealed vital segmentized bone and remodeling of the filled gap.

CONCLUSIONS

The interpositional alveolar bone graft using xenograft filler appears to be a viable and predictable alternative to block grafting or guided bone regeneration, resulting in good final results, with substantial vertical bone gain, even for challenging cases.

Clinical Importance of Recipient Site Characteristics for Vertical Ridge Augmentation: A Systematic Review of Literature and Proposal of a Classification

This review evaluated the characteristics of vertical alveolar defects that were augmented via onlay bone grafting or guided bone regeneration. Information regarding the anatomic site, type of edentulism, and defects' dimensions were extracted. The experiments differed vastly in the description of the defects' features. Aiming to mitigate the confounding effect of recipient site's morphology in future experiments, a classification of vertically deficient recipient sites is proposed.

Vertical bone augmentation with simultaneous implant placement using particulate mineralized bone and mesenchymal stem cells: a preliminary study in rabbit

This study aimed to assess vertical bone augmentation with simultaneous implant placement in rabbit tibiae using particulate mineralized bone/fibrin glue/mesenchymal stem cell. Bone marrow was aspirated from tibiae of five 10-week-old New Zealand White male rabbits. Right and left tibiae of each rabbit were prepared, and a 3-mm protruding implant from tibial bone was placed in each side. Particulate allogenic bone/fibrin glue/mesenchymal stem cell combination was placed around test implants and particulate bone graft/fibrin glue around controls. Two months postoperatively, the animals were euthanized, and sections were prepared for histological analysis. The mean amount of vertical bone length was higher in the experimental group than the control group (2.09 mm vs 1.03 mm; P < .05). New supracrestal trabecular bone formation was also significantly higher in the test group (28.5 ± 4.5% vs 4.3 ± 1.8%; P < .05). Mesenchymal stem cell/particulate allograft/fibrin glue appears to be a promising combination for vertical bone augmentation around simultaneously inserted implants in rabbit tibia.

Maintenance of phenotype and function of cryopreserved bone-derived cells

The emerging fields of tissue engineering and regenerative medicine require large numbers of cells for therapy. Although the properties of cells obtained from a variety of fresh tissues have been delineated, the knowledge regarding cryopreserved grafts-derived cells remains elusive. Previous studies have shown that living cells could be isolated from cryopreserved bone grafts. However, whether cryopreserved bone-derived cells can be applied in regenerative medicine is largely unknown. The present study was to evaluate the potential application of cryopreserved grafts-derived cells for tissue regeneration. We showed that cells derived from cryopreserved bone grafts could maintain good proliferation activity and osteogenic phenotype. The biological phenotype of these cells could be well preserved. The transplantation of cryopreserved bone-derived cells on scaffold could promote new bone formation in nude mice and enhance the osteointegration for dental implants in canine, which confirmed their osteogenic capacity, and showed that cells derived from cryopreserved bone were comparable to that of fresh bone in terms of the ability to promote osteogenesis in vivo. This work demonstrates that cryopreserved bone grafts may represent a novel, accessible source of cells for tissue regeneration therapy, and the results of our study may also stimulate the development of other cryopreservation techniques in basic and clinical studies.

Bilateral vertical ridge augmentation with block grafts and guided bone regeneration in the posterior mandible: a case report

The aim is to describe bilateral vertical ridge augmentation with intraoral block grafts and guided bone regeneration in the posterior mandible in preparation for implant placement. A 61-year-old woman, edentulous in the posterior mandible, presented for implant rehabilitation. The radiographic study showed 3 to 6 mm of bone height from the ridge to the mandibular canal. Autogenous bone block grafts from the chin and the mandibular ramus, harvested with ultrasonics, were used to augment the alveolar ridge. To reduce resorption, the grafts were covered with particulate alloplastic material and a collagen membrane. Delayed implants were placed 6 months after vertical augmentation, and 3 months later implants were loaded with a fixed prosthesis. A temporary sensory complication occurred, but 12 months after implant loading, there were no failures. In this case report block bone grafting was a feasible option to vertically augment the alveolar ridge in the posterior mandible.

Systematic evaluation of a tissue-engineered bone for maxillary sinus augmentation in large animal canine model

The objective of this study is to systematically evaluate the effects of a tissue-engineered bone complex for maxillary sinus augmentation in a canine model. Twelve sinus floor augmentation surgeries in 6 animals were performed bilaterally and randomly repaired with the following 3 groups of grafts: group A consisted of tissue-engineered osteoblasts/beta-TCP complex (n=4); group B consisted of beta-TCP alone (n=4); group C consisted of autogenous bone obtained from iliac crest as a positive control (n=4). All dogs had uneventful healings following the surgery. Sequential polychrome fluorescent labeling, maxillofacial CT, microhardness tests, as well as histological and histomorphometric analyses indicated that the tissue-engineered osteoblasts/beta-TCP complex dramatically promoted bone formation and mineralization and maximally maintained the height and volume of elevated maxillary sinus. By comparison, both control groups of beta-TCP or autologous iliac bone showed considerable resorption and replacement by fibrous or fatty tissue. We thus conclude that beta-TCP alone could barely maintain the height and volume of the elevated sinus floor, and that the transplantation of autogenous osteoblasts on beta-TCP could promote earlier bone formation and mineralization, maximally maintain height, volume and increase the compressive strength of augmented maxillary sinus. This tissue engineered bone complex might be a better alternative to autologous bone for the clinical edentulous maxillary sinus augmentation.

Vertical and horizontal bone augmentation with the intraoral autogenous J-graft

This article describes a technique to predictably reconstruct both horizontal and vertical bony defects with one graft, the autogenous J-graft. Bone harvested from the ramus is contoured in three dimensions resulting in both a horizontal and a vertical component. When there is inadequate soft tissue due to the increase in bone volume at time of augmentation, the bone graft is combined with a pedicle palatal connective tissue graft. This provides both a source of blood supply and soft tissue to the grafted site. There are several advantages to the J-graft technique; a single procedure can reconstruct complex three-dimensional defects and improve blood supply to the graft due to the larger buccal (horizontal) component in contact with the host bone which then supports the smaller occlusal (vertical) component. Finally, bone is added to interproximal sites as it curves from the buccal to the palatal against adjacent teeth. This supports the papilla at the future implant site. The autogenous J-graft is the ideal technique for augmentation in the esthetic zone with significant resorption that includes interproximal sites.