Reduced data acquisition methods in cardiac imaging

Quantitative MRI of Gd-DOTA Accumulation in the Mouse Brain After Intraperitoneal Administration: Validation by Mass Spectrometry

BACKGROUND

In mice, intraperitoneal (ip) contrast agent (CA) administration is convenient for mapping microvascular parameters over a long-time window. However, continuous quantitative MRI of CA accumulation in brain over hours is still missing.

PURPOSE

To validate a quantitative time-resolved MRI technique for mapping the CA kinetics in brain upon ip administration.

STUDY TYPE

Prospective, animal model.

SPECIMEN

25 C57Bl/6JRj mice underwent MRI.

FIELD STRENGTH/SEQUENCE

7-T, gradient echo sequence.

ASSESSMENT

Gd-DOTA concentration was monitored by MRI (25 s/repetition) over 135 minutes with (N = 15) and without (N = 10) ip mannitol challenge (5 g/kg). After the final repetition, the brains were sampled to quantify gadolinium by mass spectrometry (MS). Upon manual brain segmentation, the average gadolinium concentration was compared with the MS quantification in transcardially perfused (N = 20) and unperfused (N = 5) mice. Precontrast T1-maps were acquired in 8 of 25 mice.

STATISTICAL TESTS

One-tailed Spearman and Pearson correlation between gadolinium quantification by MRI and by MS, D'Agostino-Pearson test for normal distribution, Bland-Altman analysis to evaluate the agreement between MRI and MS. Significance was set at P-value <0.05.

RESULTS

MRI showed that ip administered CA reached the blood compartment (>5 mM) within 10 minutes and accumulated continuously for 2 hours in cerebrospinal fluid (>1 mM) and in brain tissue. The MRI-derived concentration maps showed interindividual differences in CA accumulation (from 0.47 to 0.81 mM at 2 hours) with a consistent distribution resembling the pathways of the glymphatic system. The average in-vivo brain concentration 2 hours post-CA administration correlated significantly (r = 0.8206) with the brain gadolinium quantification by MS for N = 21 paired observations available.

DATA CONCLUSION

The presented experimental and imaging protocol may be convenient for monitoring the spatiotemporal pattern of CA uptake and clearance in the mouse brain over 2 hours. The quantification of the CA from the MRI signal in brain is corroborated by MS.

EVIDENCE LEVEL

N/A TECHNICAL EFFICACY: Stage 1.

Region-focused multi-view transformer-based generative adversarial network for cardiac cine MRI reconstruction

Cardiac cine magnetic resonance imaging (MRI) reconstruction is challenging due to spatial and temporal resolution trade-offs. Temporal correlation in cardiac cine MRI is informative and vital for understanding cardiac dynamic motion. Exploiting the temporal correlations in cine reconstruction is crucial to resolve aliasing artifacts and maintaining the cardiac motion patterns. However, existing methods have the following shortcomings: (1) they simultaneously compute pairwise correlations along spatial and temporal dimensions to establish dependencies, ignoring that learning spatial contextual information first will benefit the temporal modeling. (2) most studies neglect to focus on reconstructing the local cardiac regions, resulting in insufficient reconstruction accuracy due to a relatively large field of view. To address these problems, we propose a region-focused multi-view transformer-based generative adversarial network for cardiac cine MRI reconstruction. The proposed transformer divides consecutive cardiac frames into multiple views for cross-view feature extraction, establishing long-distance dependencies among features and effectively learning the spatio-temporal information. We further design a cross-view attention for spatio-temporal information fusion, ensuring the interaction of different spatio-temporal information in each view and capturing more temporal correlations of the cardiac motion. In addition, we introduce a cardiac region detection loss for improving the reconstruction quality of the cardiac region. Experimental results demonstrated that our method outperforms state-of-the-art methods. Especially with an acceleration factor as high as 10×, our method can reconstruct images with better accuracy and perceptual quality.

Advanced Cardiac Imaging for Complex Adult Congenital Heart Diseases

The population of patients with adult congenital heart disease has grown and is currently estimated to include approximately 1 million people in the United States. Cardiologists and imagers frequently encounter complex patients who have undergone multiple prior operations and interventions. A myriad of imaging tests are currently available, including echocardiography, cardiovascular magnetic resonance imaging, and computed tomography, all of which collectively provide invaluable information on cardiac anatomy and hemodynamics. Advanced imaging plays a role in diagnosis and preprocedural planning and also determines the need and frequency of follow-up. This article provides a contemporary review of the current role of cardiac imaging in patients with complex congenital heart disease.

Assessment of local pulse wave velocity distribution in mice using k-t BLAST PC-CMR with semi-automatic area segmentation

BACKGROUND

Local aortic pulse wave velocity (PWV) is a measure for vascular stiffness and has a predictive value for cardiovascular events. Ultra high field CMR scanners allow the quantification of local PWV in mice, however these systems are yet unable to monitor the distribution of local elasticities.

METHODS

In the present study we provide a new accelerated method to quantify local aortic PWV in mice with phase-contrast cardiovascular magnetic resonance imaging (PC-CMR) at 17.6 T. Based on a k-t BLAST (Broad-use Linear Acquisition Speed-up Technique) undersampling scheme, total measurement time could be reduced by a factor of 6. The fast data acquisition enables to quantify the local PWV at several locations along the aortic blood vessel based on the evaluation of local temporal changes in blood flow and vessel cross sectional area. To speed up post processing and to eliminate operator bias, we introduce a new semi-automatic segmentation algorithm to quantify cross-sectional areas of the aortic vessel. The new methods were applied in 10 eight-month-old mice (4 C57BL/6J-mice and 6 ApoE (-/-)-mice) at 12 adjacent locations along the abdominal aorta.

RESULTS

Accelerated data acquisition and semi-automatic post-processing delivered reliable measures for the local PWV, similiar to those obtained with full data sampling and manual segmentation. No statistically significant differences of the mean values could be detected for the different measurement approaches. Mean PWV values were elevated for the ApoE (-/-)-group compared to the C57BL/6J-group (3.5 ± 0.7 m/s vs. 2.2 ± 0.4 m/s, p < 0.01). A more heterogeneous PWV-distribution in the ApoE (-/-)-animals could be observed compared to the C57BL/6J-mice, representing the local character of lesion development in atherosclerosis.

CONCLUSION

In the present work, we showed that k-t BLAST PC-MRI enables the measurement of the local PWV distribution in the mouse aorta. The semi-automatic segmentation method based on PC-CMR data allowed rapid determination of local PWV. The findings of this study demonstrate the ability of the proposed methods to non-invasively quantify the spatial variations in local PWV along the aorta of ApoE (-/-)-mice as a relevant model of atherosclerosis.

3D Whole Heart Imaging for Congenital Heart Disease

Three-dimensional (3D) whole heart techniques form a cornerstone in cardiovascular magnetic resonance imaging of congenital heart disease (CHD). It offers significant advantages over other CHD imaging modalities and techniques: no ionizing radiation; ability to be run free-breathing; ECG-gated dual-phase imaging for accurate measurements and tissue properties estimation; and higher signal-to-noise ratio and isotropic voxel resolution for multiplanar reformatting assessment. However, there are limitations, such as potentially long acquisition times with image quality degradation. Recent advances in and current applications of 3D whole heart imaging in CHD are detailed, as well as future directions.

2D phase contrast blood flow velocity measurements of the thoracic vasculature: comparison of the effect of gadofosveset trisodium and gadopentetate dimeglumine

The aim of this prospective study is to compare the performance of 2D time-resolved phase-contrast (PC) MRI prior to and after the administration of an intravascular (gadofosveset-trisodium) and extravascular (gadopentetate-dimeglumine) contrast agent in the same patient in the cardiovascular system. This study was approved by the ethics committee (Study-Number-07/Q0704/2) and registered with the MedicinesAndHealthcareProductsRegulatoryAgency (MHRA-Study-Number-28482/0002/001-0001, EudraCT-Number-2006-007042). All patients signed an informed consent. 20 patients were examined using a 1.5T MR-scanner and 32-channel-coil-technology. Gadopentetate-dimeglumine (GdD) and gadofosveset-trisodium (GdT) were administered in the same patient on consecutive days. Image quality, velocity-to-noise-ratios (VNRs) and standard-deviation of blood-flow-velocities (phase-noise) were compared between GdT, GdD and non-contrast-enhanced imaging. On both days pre- and post-contrast-scans were performed. The administration of GdT significantly improved the delineation of the perfused lumen and the VNR compared to GdD and non-contrast-enhanced imaging. Standard deviations of through-plane and in-plane velocity-measurements (phase-noise) were significantly reduced after GdT administration (p < 0.05). No significant differences (p > 0.05) were measured regarding absolute flow values prior to and after the administration of GdD and GdT. PC flow imaging benefits from the administration of an intravascular contrast agent by improving the delineation of the perfused lumen and reducing phase noise in flow measurements.

The emerging role of cardiovascular magnetic resonance in the evaluation of Kawasaki disease

Kawasaki disease (KD) is a vasculitis affecting the coronary and systemic arteries. Myocardial inflammation is also a common finding in KD post-mortem evaluation during the acute phase of the disease. Coronary artery aneurysms (CAAs) develop in 15-25% of untreated children. Although 50-70% of CAAs resolve spontaneously 1-2 years after the onset of KD, the remaining unresolved CAAs can develop stenotic lesions at either their proximal or distal end and can develop thrombus formation leading to ischemia and/or infarction. Cardiovascular magnetic resonance (CMR) has the ability to perform non-invasive and radiation-free evaluation of the coronary artery lumen. Recently tissue characterization of the coronary vessel wall was provided by CMR. It can also image myocardial inflammation, ischemia and fibrosis. Therefore CMR offers important clinical information during the acute and chronic phase of KD. In the acute phase, it can identify myocardial inflammation, microvascular disease, myocardial infarction, deterioration of left ventricular function, changes of the coronary artery lumen and changes of the coronary artery vessel wall. During the chronic phase, CMR imaging might be of value for risk stratification and to guide treatment.

Longitudinal strain from velocity encoded cardiovascular magnetic resonance: a validation study

BACKGROUND

Regional myocardial function is typically evaluated by visual assessment by experienced users, or by methods requiring substantial post processing time. Visual assessment is subjective and not quantitative. Therefore, the purpose of this study is to develop and validate a simple method to derive quantitative measures of regional wall function from velocity encoded cardiovascular magnetic resonance (CMR), and provide associated normal values for longitudinal strain.

METHOD

Both fast field echo (FFE) and turbo field echo (TFE) velocity encoded CMR images were acquired in three long axis planes in 36 healthy volunteers (13 women, 23 men), age 35±12 years. Strain was also quantified in 10 patients within one week after myocardial infarction. The user manually delineated myocardium in one time frame and strain was calculated as the myocardium was tracked throughout the cardiac cycle using an optimization formulation and mechanical a priori assumptions. A phantom experiment was performed to validate the method with optical tracking of deformation as an independent gold standard.

RESULTS

There was an excellent agreement between longitudinal strain measured by optical tracking and longitudinal strain measured with TFE velocity encoding. Difference between the two methods was 0.0025 ± 0.085 (ns). Mean global longitudinal strain in the 36 healthy volunteers was -0.18 ± 0.10 (TFE imaging). Intra-observer variability for all segments was 0.00 ± 0.06. Inter-observer variability was -0.02 ± 0.07 (TFE imaging). The intra-observer variability for radial strain was high limiting the applicability of radial strain. Mean longitudinal strain in patients was significantly lower (-0.15± 0.12) compared to healthy volunteers (p<0.05). Strain (expressed as percentage of normal strain) in infarcted regions was lower compared to remote areas (p<0.01).

CONCLUSION

In conclusion, we have developed and validated a robust and clinically applicable technique that can quantify longitudinal strain and regional myocardial wall function and present the associated normal values for longitudinal strain.

MRI temporal acceleration techniques

In recent years, there has been an explosive growth of magnetic resonance imaging (MRI) techniques that allow faster scan speed by exploiting temporal or spatiotemporal redundancy of the images. These techniques improve the performance of dynamic imaging significantly across multiple clinical applications, including cardiac functional examinations, perfusion imaging, blood flow assessment, contrast-enhanced angiography, functional MRI, and interventional imaging, among others. The scan acceleration permits higher spatial resolution, increased temporal resolution, shorter scan duration, or a combination of these benefits. Along with the exciting developments is a dizzying proliferation of acronyms and variations of the techniques. The present review attempts to summarize this rapidly growing topic and presents conceptual frameworks to understand these techniques in terms of their underlying mechanics and connections. Techniques from view sharing, keyhole, k-t, to compressed sensing are covered.

Imaging sequences in cardiovascular magnetic resonance: current role, evolving applications, and technical challenges

Cardiovascular magnetic resonance (CMR) has been established as a powerful and comprehensive imaging modality for studying the cardiovascular (CV) system. Shortly after invention of magnetic resonance imaging, CMR applications and developments started to emerge, and they continue to evolve up to the present day. CMR has the advantages of high spatial resolution, enhanced tissue contrast, superior safety profile, and the plethora of physiological parameters that can be obtained. In the near future, CMR is expected to be the gold standard modality for comprehensive CV imaging. Specifically, CMR imaging sequences are increasingly growing in parallel with advancements in scanner hardware. Not only do CMR imaging sequences provide detailed anatomical information, but they also provide functional, perfusion, viability, hemodynamic, and metabolic information about the CV system. In this article, an up-to-date review of different CMR imaging sequences is presented. Each sequence is described along with typical imaging parameters, necessary image processing steps, derived CV parameters, and potential applications. The article then addresses advanced CMR imaging techniques and emerging applications. Finally, the challenges facing CMR imaging are discussed along with its expected future role.

Magnetic resonance assessment of left ventricular volumes and mass using a single-breath-hold 3D k-t BLAST cine b-SSFP in comparison with multiple-breath-hold 2D cine b-SSFP

Objective

To assess the feasibility of single-breath-hold three-dimensional cine b-SSFP (balanced steady-state free precession gradient echo) sequence (3D-cine), accelerated with k-t BLAST (broad-use linear acquisition speed-up technique), compared with multiple-breath-hold 2D cine b-SSFP (2D-cine) sequence for assessment of left ventricular (LV) function.

Methods

Imaging was performed using 1.5-T MRI (Achieva, Philips, The Netherlands) in 46 patients with different cardiac diseases. Global functional parameters, LV mass, imaging time and reporting time were evaluated and compared in each patient.

Results

Functional parameters and mass were significantly different in the two sequences [3D end-diastolic volume (EDV) = 129 ± 44 ml vs 2D EDV = 134 ± 49 ml; 3D end-systolic volume (ESV) = 77 ± 44 ml vs 2D ESV = 73 ± 50 ml; 3D ejection fraction (EF) = 43 ± 15% vs 2D EF = 48 ± 15%; p < 0.05], although an excellent correlation was found for LV EF (r = 0.99). Bland-Altman analysis showed small confidence intervals with no interactions on volumes (EF limits of agreement = 2.7; 7.6; mean bias 5%). Imaging time was significantly lower for 3D-cine sequence (18 ± 1 s vs 95 ± 23 s; p < 0.05), although reporting time was significantly longer for the 3D-cine sequence (29 ± 7 min vs 8 ± 3 min; p < 0.05).

Conclusions

A 3D-cine sequence can be advocated as an alternative to 2D-cine sequence for LV EF assessment in patients for whom shorter imaging time is desirable.

Performance of simultaneous cardiac-respiratory self-gated three-dimensional MR imaging of the heart: initial experience

This study was approved by the local institutional ethics committee, and informed consent was obtained from all volunteers and patients. The objective of the present study was to assess the performance of high-spatial-resolution three-dimensional prospective cardiac-respiratory self-gated (CRSG) magnetic resonance (MR) imaging for determining left ventricular (LV) volumes and mass, as well as right ventricular (RV) volumes, in comparison with standard electrocardiography (ECG)-triggered, two-dimensional multisection, multiple-breath-hold cine imaging. The self-gated method derives cardiac triggering and respiratory gating information prospectively on the basis of additional MR imaging signals acquired in every repetition time and, thereby, eliminates the need for ECG triggering and multiple-breath-hold procedures. Data were acquired in 15 healthy volunteers (mean age, 27.2 years +/- 7.2 [standard deviation]) and 11 patients (mean age, 60.7 years +/- 11.3). The bias between the self-gating and the reference imaging techniques was minimal for all LV and RV parameters (mean values: LV end-diastolic volume, 2.0 mL; LV end-systolic volume, 0.6 mL; RV end-diastolic volume, 2.2 mL; and RV end-systolic volume, 0.8 mL). Prospective CRSG is a valuable alternative to ECG-triggered, multisection, multiple-breath-hold cine imaging of the heart and holds considerable promise for simplifying functional imaging of the heart, particularly in patients who are unable to hold their breath for a long period and patients who show ECG signal disturbances.

Accelerated time-resolved three-dimensional MR velocity mapping of blood flow patterns in the aorta using SENSE and k-t BLAST

PURPOSE

To assess the feasibility and potential limitations of the acceleration techniques SENSE and k-t BLAST for time-resolved three-dimensional (3D) velocity mapping of aortic blood flow. Furthermore, to quantify differences in peak velocity versus heart phase curves.

MATERIALS AND METHODS

Time-resolved 3D blood flow patterns were investigated in eleven volunteers and two patients suffering from aortic diseases with accelerated PC-MR sequences either in combination with SENSE (R=2) or k-t BLAST (6-fold). Both sequences showed similar data acquisition times and hence acceleration efficiency. Flow-field streamlines were calculated and visualized using the GTFlow software tool in order to reconstruct 3D aortic blood flow patterns. Differences between the peak velocities from single-slice PC-MRI experiments using SENSE 2 and k-t BLAST 6 were calculated for the whole cardiac cycle and averaged for all volunteers.

RESULTS

Reconstruction of 3D flow patterns in volunteers revealed attenuations in blood flow dynamics for k-t BLAST 6 compared to SENSE 2 in terms of 3D streamlines showing fewer and less distinct vortices and reduction in peak velocity, which is caused by temporal blurring. Solely by time-resolved 3D MR velocity mapping in combination with SENSE detected pathologic blood flow patterns in patients with aortic diseases. For volunteers, we found a broadening and flattering of the peak velocity versus heart phase diagram between the two acceleration techniques, which is an evidence for the temporal blurring of the k-t BLAST approach.

CONCLUSION

We demonstrated the feasibility of SENSE and detected potential limitations of k-t BLAST when used for time-resolved 3D velocity mapping. The effects of higher k-t BLAST acceleration factors have to be considered for application in 3D velocity mapping.

Accelerated phase-contrast MR imaging: comparison of k-t BLAST with SENSE and Doppler ultrasound for velocity and flow measurements in the aorta

PURPOSE

To evaluate differences in velocity and flow measurements in the aorta between accelerated phase-contrast (PC) magnetic resonance imaging (MRI) using SENSE and k-t BLAST and in peak velocity to Doppler ultrasound.

MATERIALS AND METHODS

Two-dimensional PC-MRI perpendicular to the ascending and descending aorta was performed in 11 volunteers using SENSE (R = 2) and k-t BLAST (2-, 4-, 6-, and 8-fold). Peak velocity, mean velocity, and stroke volume of the accelerated PC-MRI experiments were correlated. Peak velocities were compared to Doppler ultrasound.

RESULTS

All acceleration techniques showed significant correlations for peak velocity with Doppler ultrasound. However, k-t BLAST 6 and 8 showed a significant underestimation. Strong correlations between SENSE and k-t BLAST were found for all three parameters. Significant differences in peak velocity were found between SENSE and all k-t BLAST experiments, but not for 2-fold k-t BLAST in the ascending aorta, and 2- and 4-fold k-t BLAST in the descending aorta. For mean velocity no significant differences were found. Stroke volume showed significant differences for all k-t BLAST experiments in the ascending and for 6- and 8-fold k-t BLAST in the descending aorta.

CONCLUSION

Peak velocity of accelerated PC-MRI correlated with CW Doppler measurements, but high k-t BLAST acceleration factors lead to a significant underestimation. SENSE with R = 2 and 2-fold k-t BLAST are most highly correlated in phase-contrast flow measurements.

Assessment of left ventricular function with single breath-hold highly accelerated cine MRI combined with guide-point modeling

PURPOSE

To prospectively assess the performance of highly accelerated cine MRI in multi-orientations combined with a new guide-point modeling post-processing technique (GPM approach) for assessment of left ventricular (LV) function compared to the standard summation of slices method based on a stack of short axis views (SoS approach).

MATERIALS AND METHODS

33 consecutive patients were examined on a 1.5T scanner with a standard steady state free precession (SSFP) sequence (TR, 3.0 ms; TE, 1.5m; flip angle (FA), 60 degrees ; acceleration factor (AF), 2) analyzed with the SoS method and a highly accelerated, single breath-hold temporal parallel acquisition SSFP sequence (TR, 4.6 ms; TE, 1.1 ms; AF, 3) post-processed with the GPM method. LV function values were measured by two independent readers with different experience in cardiac MRI and compared by using the paired t-test and F-test. Inter- and intraobserver agreements were calculated using Bland-Altman-Plots.

RESULTS

Mean acquisition and post-processing time was significantly shorter with the GPM approach (15s/3 min versus 360 s/6 min). For all LV function parameters interobserver agreement between the experienced and non-experienced reader was significantly improved when the GPM approach was used. However, end-diastolic and end-systolic volumes were larger for the GPM technique when compared to the SoS method (P<0.001), whereas ejection fraction estimation yielded equivalent results (P>0.121). In both readers and for all parameters variances did not differ significantly (P>or=0.409) and the two approaches showed an excellent linear correlation (r>0.951).

CONCLUSION

Due to its accurate, fast and reproducible assessment of LV function parameters highly accelerated MRI combined with the GPM technique may become the technique of first choice for assessment of LV function in clinical routine.

Three dimensional three component whole heart cardiovascular magnetic resonance velocity mapping: comparison of flow measurements from 3D and 2D acquisitions

BACKGROUND

Two-dimensional, unidirectionally encoded, cardiovascular magnetic resonance (CMR) velocity mapping is an established technique for the quantification of blood flow in large vessels. However, it requires an operator to correctly align the planes of acquisition. If all three directional components of velocity are measured for each voxel of a 3D volume through the phases of the cardiac cycle, blood flow through any chosen plane can potentially be calculated retrospectively. The initial acquisition is then more time consuming but relatively operator independent.

AIMS

To compare the curves and volumes of flow derived from conventional 2D and comprehensive 3D flow acquisitions in a steady state flow model, and in vivo through planes transecting the ascending aorta and pulmonary trunk in 10 healthy volunteers.

METHODS

Using a 1.5 T Phillips Intera CMR system, 3D acquisitions used an anisotropic 3D segmented k-space phase contrast gradient echo sequence with a short EPI readout, with prospective ECG and diaphragm navigator gating. The 2D acquisitions used segmented k-space phase contrast with prospective ECG and diaphragm navigator gating. Quantitative flow analyses were performed retrospectively with dedicated software for both the in vivo and in vitro acquisitions.

RESULTS

Analysis of in vitro data found the 3D technique to have overestimated the continuous flow rate by approximately 5% across the entire applied flow range. In vivo, the 2D and the 3D techniques yielded similar volumetric flow curves and measurements. Aortic flow: (mean +/- SD), 2D = 89.5 +/- 13.5 ml & 3D = 92.7 +/- 17.5 ml. Pulmonary flow: 2D = 98.8 +/- 18.4 ml & 3D = 94.9 +/- 19.0 ml). Each in vivo 3D acquisition took about 8 minutes or more.

CONCLUSION

Flow measurements derived from the 3D and 2D acquisitions were comparable. Although time consuming, comprehensive 3D velocity acquisition could be relatively operator independent, and could potentially yield information on flow through several retrospectively chosen planes, for example in patients with congenital or valvular heart disease.

Single-breathhold four-dimensional assessment of left ventricular volumes and function using k-t BLAST after application of extracellular contrast agent at 3 Tesla

PURPOSE

To prospectively determine the feasibility and accuracy of a four-dimensional (4D) k-space over time broad-use linear acquisition speed-up technique (k-t BLAST) for the evaluation of left ventricular (LV) volumes in comparison to standard multiple-breathhold cine imaging, using a 3.0 Tesla (3T) MR system.

MATERIALS AND METHODS

In 23 subjects, short-axis cine loops completely covering the LV were acquired using conventional turbo gradient echo (GRE) imaging. Immediately after administration of gadobenate dimeglumine, a rapid single-breathhold k-t BLAST 4D dataset with the same coverage was acquired and reconstructed to short-axis views. Quantitative aortic flow measurement for LV stroke volume (LVSV) was used to calibrate both techniques. For GRE and k-t BLAST cine imaging: LV volumes, ejection fraction (EF), and blood-to-myocardium-contrast (BMC) were determined.

RESULTS

k-t BLAST and GRE sequences showed a strong correlation for LV volumes and EF (r = 0.97-0.99; P < 0.001). Excellent agreement was also found between the LVSV determined by aortic flow measurements and LVSV assessed using GRE sequence and k-t BLAST sequence. BMC of GRE was similar to that of k-t BLAST cine imaging.

CONCLUSION

The use of the single-breathhold 4D k-t BLAST technique for the assessment of LV volume is feasible and accurate in 3T MRI.

Assessment of left ventricular volumes and mass with fast 3D cine steady-state free precession k-t space broad-use linear acquisition speed-up technique (k-t BLAST)

PURPOSE

To compare left ventricular (LV) volume and mass assessment using two-dimensional (2D) cine steady-state free precession (SSFP) and k-t space broad-use linear acquisition speed-up technique (k-t BLAST) accelerated 3D magnetic resonance imaging (MRI).

MATERIALS AND METHODS

On a commercially available 1.5T MR scanner, 2D cine SSFP, six- and eight-fold accelerated 3D k-t BLAST were performed to evaluate LV volumes and mass in 17 volunteers. After semiautomatic segmentation of the different MR data sets, the resulting volumes and mass were compared according to the mean difference, 95% confidence interval, standard deviation (SD), Pearson's correlation coefficient, Bland-Altman analysis, and the Pitman-Morgan test.

RESULTS

Data acquisition was successful in all subjects. The number of required breathholds was reduced from a maximal of five for the 2D cine SSFP sequence to two for 3D k-t BLAST sequences. Comparing LV volumes, there was excellent agreement between 2D and 3D cine 8x k-t BLAST SSFP volumes (mean difference +/- 2SD end-diastolic volume [EDV] = 5 +/- 8 mL, end-systolic volume [ESV] = 1 +/-12 mL, and stroke volume [SV] = 3 +/- 8 mL), and mass (-1.8 +/- 9 g).

CONCLUSION

k-t BLAST-accelerated 3D sequences allow accurate assessment of LV volumes and mass compared to 2D cine SSFP. This method may reduce costs and increase patient comfort due to shortened data acquisition time and reduced number of breathholds.

Measurement of left ventricular dimensions with contrast-enhanced three-dimensional cine imaging facilitated by k-t SENSE

AIM

To compare three-dimensional (3D) k-t sensitivity encoded (k-t SENSE) cine cardiovascular magnetic resonance (CMR), before and after contrast administration, against standard 2D imaging for the assessment of left ventricular volumes and mass.

METHOD

Twenty-six subjects (14 volunteers, 12 patients) underwent multiple breathhold 2D balanced turbo-field echo cine CMR in addition to k-t SENSE accelerated 3D imaging (acceleration factor 5; 5x k-t SENSE), performed before and after administration of a high-relaxivity gadolinium-based contrast agent (Gadobutrolum). k-t acceleration factors of 7 and 10 were also assessed in six volunteers. Left ventricular end diastolic volume (EDV), end systolic volume (ESV), mass, and ejection fraction (EF) were calculated for each method.

RESULTS

There was at least moderate agreement between the EDV, ESV, mass and EF calculated by 2D and 3D 5x k-t SENSE methods before contrast (concordance coefficients 0.92, 0.95, 0.97, 0.92, respectively). Agreement improved following contrast (concordance coefficients 0.97, 0.99, 0.98, 0.93, respectively). The 3D method underestimated all parameters compared to 2D (mean bias pre-contrast 6.1 ml, 0.6 ml, 3.5 g, 2.0% respectively). 3D image quality scores were significantly poorer than 2D, showing a non-significant trend to improvement following contrast administration. Parameters derived with k-t acceleration factors of 7 and 10 showed poorer agreement with 2D values.

CONCLUSION

Left ventricular volumes and mass are reliably assessed using 3D 5x k-t SENSE accelerated CMR. Contrast administration further improves agreement between 5x k-t SENSE and 2D-derived measurements. k-t acceleration factors greater than 5, though feasible, produce poorer agreement with 2D values.

Quantitative assessment of ventricular function using three-dimensional SSFP magnetic resonance angiography

PURPOSE

To evaluate three-dimensional (3D), free-breathing, steady-state free precession (SSFP) magnetic resonance angiography (MRA) for volumetric assessment of ventricular function.

MATERIALS AND METHODS

In 18 subjects (mean age = 21.5 years) 3D datasets of the heart and great vessels were acquired using an ECG-triggered, free-breathing SSFP technique with a T2-preparation prepulse. Data were acquired during end-systole (ES) and end-diastole (ED) for assessment of stroke volumes (SVs). Through-plane flow measurements of the great arteries were performed as well as 2D-cine SSFP imaging for comparison. For image analysis of the 3D SSFP datasets a simplex mesh model was used. Papillary muscles were excluded from ventricular volumes using thresholds. Intra- and interobserver variability (Bland-Altman analysis) and correlations (Pearson's coefficient) between volumetric and flow measurements were assessed.

RESULTS

ES and ED datasets were acquired successfully in all subjects. The best correlation was observed between flow vs. 3D SSFP SV for the LV (r = 0.85, mean difference = -1.0 mL) and the RV (r = 0.89, mean difference = -2.2 mL) with high intra- (LV: r = 0.93; RV: r = 0.94) and interobserver (LV: r = 0.91; RV: r = 0.93) reproducibility.

CONCLUSION

3D SSFP datasets combined with semiautomatic segmentation algorithms allow highly accurate and reproducible assessment of left (LV) and right ventricular (RV) SVs in free-breathing subjects.

Improving k-t SENSE by adaptive regularization

The recently proposed method known as k-t sensitivity encoding (SENSE) has emerged as an effective means of improving imaging speed for several dynamic imaging applications. However, k-t SENSE uses temporally averaged data as a regularization term for image reconstruction. This may not only compromise temporal resolution, it may also make some of the temporal frequency components irrecoverable. To address that issue, we present a new method called spatiotemporal domain-based unaliasing employing sensitivity encoding and adaptive regularization (SPEAR). Specifically, SPEAR provides an improvement over k-t SENSE by generating adaptive regularization images. It also uses a variable-density (VD), sequentially interleaved k-t space sampling pattern with reference frames for data acquisition. Simulations based on experimental data were performed to compare SPEAR, k-t SENSE, and several other related methods, and the results showed that SPEAR can provide higher temporal resolution with significantly reduced image artifacts. Ungated 3D cardiac imaging experiments were also carried out to test the effectiveness of SPEAR, and real-time 3D short-axis images of the human heart were produced at 5.5 frames/s temporal resolution and 2.4 x 1.2 x 8 mm3 spatial resolution with eight slices.

Reproducibility of free-breathing cardiovascular magnetic resonance coronary angiography

OBJECTIVE

Contemporary free-breathing non contrast enhanced cardiovascular magnetic resonance angiography (CMRA) was qualitatively and quantitatively evaluated to ascertain the reproducibility of the method for coronary artery luminal dimension measurements.

SUBJECTS AND METHODS

Twenty-two healthy volunteers (mean age 32 +/- 7 years, 12 males) without coronary artery disease were imaged at 2 centers (1 each in Europe and North America) using navigator-gated and corrected SSFP CMRA on a commercial whole body 1.5T System. Repeat images of right (RCA, n = 21), left anterior descending (LAD, n = 14) and left circumflex (LCX, n = 14) coronary arteries were obtained in separate sessions using identical scan protocol and imaging parameters. True visible vessel length, signal-to-noise (SNR), contrast-to-noise ratios (CNR) and the average luminal diameter over the first 4 cm of the vessel were measured. Intra-observer, inter-observer and inter-scan reproducibility of coronary artery luminal diameter were determined using Pearson's correlation, Bland-Altman analysis and intraclass correlation coefficients (ICC).

RESULTS

CNR, SNR and the mean length of the RCA, LAD and LCX imaged for original and repeat scans were not significantly different (all p > 0.30). There was a high degree of intra-observer, inter-observer and inter-scan agreements for RCA, LAD and LCX luminal diameter respectively on Bland-Altman and ICC analysis (ICC's for RCA: 0.98. 0.98 and 0.86; LAD: 0.89, 0.89 and 0.63; LCX: 0.95, 0.94 and 0.79).

CONCLUSION

In a 2-center study, we demonstrate that free-breathing 3D SSFP CMRA can visualize long continuous segments of coronary vessels with highly reproducible measurements of luminal diameter.

High-resolution dynamic imaging of contrast agent uptake in a beating heart

Dynamic contrast-enhanced (DCE) MR cardiac imaging has been recognized as a unique and powerful tool for assessing both cardiac functions and physiological conditions of the heart tissues (e.g., tissue rejection following heart transplantation). However, because of cardiac motion and the limited data acquisition speed of existing MRI techniques, it has been very difficult to acquire dynamic images of very high spatiotemporal resolution. This paper proposes a new generalized series (GS) based imaging technique to overcome this challenging problem. Specifically, the proposed technique collects two data sets: a) a sequence of highresolution reference images over several cardiac cycles using a gated cine acquisition scheme before the injection of a contrast agent (or a molecular probe), and b) a sequence of reduced data sets with very high frame rate during the transient wash-in/wash-out stage of the contrast agent. A GS model is then used to combine these two data sets to reconstruct a high-resolution image sequence, capturing both the cardiac motions and dynamic signal changes due to the interaction of the contrast agent with the cardiac tissues. The proposed technique has been validated using both simulated and experimental data, which show that high-resolution dynamic images can be acquired with as few as 8 encodings (in contrast to 256 encodings required in the traditional Fourier transform-based methods). The technique provides a very effective tool for physiological imaging of the beating heart with molecular probes.

Stereolithographic reproduction of complex cardiac morphology based on high spatial resolution imaging

BACKGROUND

Precise knowledge of cardiac anatomy is mandatory for diagnosis and treatment of congenital heart disease. Modern imaging techniques allow high resolution three-dimensional (3D) imaging of the heart and great vessels. In this study stereolithography was evaluated for 3D reconstructions of multidetector computed tomography (MDCT) and magnetic resonance imaging (MRI) data.

METHODS

A plastinated heart specimen was scanned with MDCT and after segmentation a stereolithographic (STL) model was produced with laser sinter technique. After scanning the STL model with MDCT these data were compared with those of the original specimen after rigid registration using the iterative closest points algorithm (ICP). The two surfaces of the original specimen and STL model were matched and the symmetric mean distance was calculated. Additionally, the heart and great vessels of patients (age range 41 days-21 years) with congenital heart anomalies were imaged with MDCT (n=2) or free breathing steady, state free-precession MRI (n=3). STL models were produced from these datasets and the cardiac segments were analyzed by two independent observers.

RESULTS

All cardiac structures of the heart specimen were reconstructed as a STL model within sub-millimeter resolution (mean surface distance 0.27+/-0.76 mm). Cardiac segments of the STL patient models were correctly analyzed by two independent observers compared to the original 3D datasets, echocardiography (n=5), x-ray angiography (n=5), and surgery (n=4).

CONCLUSIONS

High resolution MDCT or MRI 3D datasets can be accurately reconstructed using laser sinter technique. Teaching, research and preoperative planning may be facilitated in the future using this technique.

Temporally constrained reconstruction of dynamic cardiac perfusion MRI

Dynamic contrast-enhanced (DCE) MRI is a powerful technique to probe an area of interest in the body. Here a temporally constrained reconstruction (TCR) technique that requires less k-space data over time to obtain good-quality reconstructed images is proposed. This approach can be used to improve the spatial or temporal resolution, or increase the coverage of the object of interest. The method jointly reconstructs the space-time data iteratively with a temporal constraint in order to resolve aliasing. The method was implemented and its feasibility tested on DCE myocardial perfusion data with little or no motion. The results obtained from sparse k-space data using the TCR method were compared with results obtained with a sliding-window (SW) method and from full data using the standard inverse Fourier transform (IFT) reconstruction. Acceleration factors of 5 (R = 5) were achieved without a significant loss in image quality. Mean improvements of 28 +/- 4% in the signal-to-noise ratio (SNR) and 14 +/- 4% in the contrast-to-noise ratio (CNR) were observed in the images reconstructed using the TCR method on sparse data (R = 5) compared to the standard IFT reconstructions from full data for the perfusion datasets. The method has the potential to improve dynamic myocardial perfusion imaging and also to reconstruct other sparse dynamic MR acquisitions.

4-D Micro-CT of the Mouse Heart

Purpose: Demonstrate noninvasive imaging methods for in vivo characterization of cardiac structure and function in mice using a micro-CT system that provides high photon fluence rate and integrated motion control. Materials and Methods: Simultaneous cardiac- and respiratory-gated micro-CT was performed in C57BL/6 mice during constant intravenous infusion of a conventional iodinated contrast agent (Isovue-370), and after a single intravenous injection of a blood pool contrast agent (Fenestra VC). Multiple phases of the cardiac cycle were reconstructed with contrast to noise and spatial resolution sufficient for quantitative assessment of cardiac function. Results: Contrast enhancement with Isovue-370 increased over time with a maximum of ~500 HU (aorta) and 900 HU (kidney cortex). Fenestra VC provided more constant enhancement over 3 hr, with maximum enhancement of ~620 HU (aorta) and ~90 HU (kidney cortex). The maximum enhancement difference between blood and myocardium in the heart was ~250 HU for Isovue-370 and ~500 HU for Fenestra VC. In mice with Fenestra VC, volumetric measurements of the left ventricle were performed and cardiac function was estimated by ejection fraction, stroke volume, and cardiac output. Conclusion: Image quality with Fenestra VC was sufficient for morphological and functional studies required for a standardized method of cardiac phenotyping of the mouse.