Guided Tissue Regeneration, Barrier Membranes and Reconstruction of the Cleft Maxillary Alveolus

Electrophoretically Co-Deposited Collagen-Lactoferrin Membranes with Enhanced Pro-Regenerative Properties for Oral Soft Tissue Regeneration

The quality of soft tissue defect regeneration after dental surgeries largely determines their final success. Collagen membranes have been proposed for the healing of such defects, but in some cases, they do not guarantee a sufficient volume of the regenerated tissue and vascularization. For this purpose, lactoferrin, a protein with natural pro-regenerative, anti-inflammatory, and pro-angiogenic activity, can be added to collagen. In this article, we used a semipermeable barrier-assisted electrophoretic deposition (SBA-EPD) method for the production of collagen-lactoferrin membranes. The membrane structure was studied by SEM, and its mechanical properties were shown. The lactoferrin release kinetics were shown by ELISA within 75 h. When tested in vitro, we demonstrated that the collagen-lactoferrin membranes significantly increased the proliferation of keratinocytes (HaCaT) and fibroblasts (977hTERT) compared to blank collagen membranes. In vivo, on the vestibuloplasty and free gingival graft harvesting models, we showed that collagen-lactoferrin membranes decreased the wound inflammation and increased the healing rates and regeneration quality. In some parameters, collagen-lactoferrin membranes outperformed not only blank collagen membranes, but also the commercial membrane Mucograft®. Thus, we proved that collagen-lactoferrin membranes produced by the SBA-EPD method may be a valuable alternative to commercially used membranes for soft tissue regeneration in the oral cavity.

Using the Dermal Fat Graft as a Barrier Membrane in Unilateral Alveolar Cleft Grafting: A Randomized Clinical Trial

INTRODUCTION

Alveolar cleft grafting is a surgical procedure that usually suffers from inferior results.

METHODOLOGY

The patients were divided into 2 groups; study and control. In the study group, the grafted site was covered with a dermal fat graft.

RESULTS

Showed that the bone fill percentage (Bergland Scale) recorded in the study was significantly better ( P =0.03); the study group had 14 successful cases out of 18 compared with the control, which had only 9 out of 20. The study group significantly ( P = 0.002) better bone fill (71%±32%) compared with the control (46%±33%). There was a significant reduction in dehiscence in the study compared with the control ( P =0.02); the study group had no dehiscence compared with the control, which had 5 dehiscence.

CONCLUSION

The dermal fat graft use as a barrier membrane was successful in improving alveolar cleft grafting.

Proliferation and Morphological Assessment of Human Periodontal Ligament Fibroblast towards Bovine Pericardium Membranes: An In Vitro Study

Over the past decade regenerative branches of dentistry have taken on more and more importance, resulting in the development of performing scaffold materials. These should induce cell adhesion, support, and guide the tissues’ growth. Among the developed materials, we can include resorbable or non-membranes. The purpose of this study was to investigate the proliferation abilities and the attachment of human periodontal ligament fibroblasts (HPLIFs) over two bovine pericardium membranes with different thicknesses, 0.2 mm and 0.4 mm, respectively. These membranes have been decellularized by the manufacturer, preserving the three-dimensional collagen’s structure. The HPLFs were cultured in standard conditions and exposed to the tested materials. XTT was performed to assess cell proliferation, while light microscopy (LM) and scanning electron microscopy (SEM) observations assessed fibroblast morphology at different times (T1, T2, and T3). Proliferation assays have shown a statistically significant difference in growth at T1 (p < 0.05) in the cells cultured with a thicker membrane compared to the thinner one. LM analysis showed healthy fibroblasts in contact with the membranes, appearing larger and with a polygonal shape. SEM observation demonstrated thickening of the fibroblasts which continued to adhere to the membrane’s surface, with enlarged polygonal shape and developed filipodia and lamellipodia. These results showed a similar cell behavior over the two bovine pericardium membranes, demonstrating a cellular migration along and within the layers of the membrane, binding with membrane fibers by means of filopodial extensions. Knowledge of the effects of the collagen membranes derived from bovine pericardium on cellular behavior will help clinicians choose the type of scaffolds according to the required clinical situation.

Recent update on craniofacial tissue engineering

The craniofacial region consists of several different tissue types. These tissues are quite commonly affected by traumatic/pathologic tissue loss which has so far been traditionally treated by grafting procedures. With the complications and drawbacks of grafting procedures, the emerging field of regenerative medicine has proved potential. Tissue engineering advancements and the application in the craniofacial region is quickly gaining momentum although most research is still at early in vitro/in vivo stages. We aim to provide an overview on where research stands now in tissue engineering of craniofacial tissue; namely bone, cartilage muscle, skin, periodontal ligament, and mucosa. Abstracts and full-text English articles discussing techniques used for tissue engineering/regeneration of these tissue types were summarized in this article. The future perspectives and how current technological advancements and different material applications are enhancing tissue engineering procedures are also highlighted. Clinically, patients with craniofacial defects need hybrid reconstruction techniques to overcome the complexity of these defects. Cost-effectiveness and cost-efficiency are also required in such defects. The results of the studies covered in this review confirm the potential of craniofacial tissue engineering strategies as an alternative to avoid the problems of currently employed techniques. Furthermore, 3D printing advances may allow for fabrication of patient-specific tissue engineered constructs which should improve post-operative esthetic results of reconstruction. There are on the other hand still many challenges that clearly require further research in order to catch up with engineering of other parts of the human body.

Tissue engineering in dentistry

OBJECTIVES

of this review is to inform practitioners with the most updated information on tissue engineering and its potential applications in dentistry.

DATA

The authors used "PUBMED" to find relevant literature written in English and published from the beginning of tissue engineering until today. A combination of keywords was used as the search terms e.g., "tissue engineering", "approaches", "strategies" "dentistry", "dental stem cells", "dentino-pulp complex", "guided tissue regeneration", "whole tooth", "TMJ", "condyle", "salivary glands", and "oral mucosa".

SOURCES

Abstracts and full text articles were used to identify causes of craniofacial tissue loss, different approaches for craniofacial reconstructions, how the tissue engineering emerges, different strategies of tissue engineering, biomaterials employed for this purpose, the major attempts to engineer different dental structures, finally challenges and future of tissue engineering in dentistry.

STUDY SELECTION

Only those articles that dealt with the tissue engineering in dentistry were selected.

CONCLUSIONS

There have been a recent surge in guided tissue engineering methods to manage periodontal diseases beyond the traditional approaches. However, the predictable reconstruction of the innate organisation and function of whole teeth as well as their periodontal structures remains challenging. Despite some limited progress and minor successes, there remain distinct and important challenges in the development of reproducible and clinically safe approaches for oral tissue repair and regeneration. Clearly, there is a convincing body of evidence which confirms the need for this type of treatment, and public health data worldwide indicates a more than adequate patient resource. The future of these therapies involving more biological approaches and the use of dental tissue stem cells is promising and advancing. Also there may be a significant interest of their application and wider potential to treat disorders beyond the craniofacial region.

CLINICAL SIGNIFICANCE

Considering the interests of the patients who could possibly be helped by applying stem cell-based therapies should be carefully assessed against current ethical concerns regarding the moral status of the early embryo.

Collagen--emerging collagen based therapies hit the patient

The choice of biomaterials available for regenerative medicine continues to grow rapidly, with new materials often claiming advantages over the short-comings of those already in existence. Going back to nature, collagen is one of the most abundant proteins in mammals and its role is essential to our way of life. It can therefore be obtained from many sources including porcine, bovine, equine or human and offer a great promise as a biomimetic scaffold for regenerative medicine. Using naturally derived collagen, extracellular matrices (ECMs), as surgical materials have become established practice for a number of years. For clinical use the goal has been to preserve as much of the composition and structure of the ECM as possible without adverse effects to the recipient. This review will therefore cover in-depth both naturally and synthetically produced collagen matrices. Furthermore the production of more sophisticated three dimensional collagen scaffolds that provide cues at nano-, micro- and meso-scale for molecules, cells, proteins and bulk fluids by inducing fibrils alignments, embossing and layered configuration through the application of plastic compression technology will be discussed in details. This review will also shed light on both naturally and synthetically derived collagen products that have been available in the market for several purposes including neural repair, as cosmetic for the treatment of dermatologic defects, haemostatic agents, mucosal wound dressing and guided bone regeneration membrane. There are other several potential applications of collagen still under investigations and they are also covered in this review.

Bacterial cellulose-hydroxyapatite nanocomposites for bone regeneration

The aim of this study was to develop and to evaluate the biological properties of bacterial cellulose-hydroxyapatite (BC-HA) nanocomposite membranes for bone regeneration. Nanocomposites were prepared from bacterial cellulose membranes sequentially incubated in solutions of CaCl₂ followed by Na₂HPO₄. BC-HA membranes were evaluated in noncritical bone defects in rat tibiae at 1, 4, and 16 weeks. Thermogravimetric analyses showed that the amount of the mineral phase was 40%–50% of the total weight. Spectroscopy, electronic microscopy/energy dispersive X-ray analyses, and X-ray diffraction showed formation of HA crystals on BC nanofibres. Low crystallinity HA crystals presented Ca/P a molar ratio of 1.5 (calcium-deficient HA), similar to physiological bone. Fourier transformed infrared spectroscopy analysis showed bands assigned to phosphate and carbonate ions. In vivo tests showed no inflammatory reaction after 1 week. After 4 weeks, defects were observed to be completely filled in by new bone tissue. The BC-HA membranes were effective for bone regeneration.

Collagen membranes for host-graft integration: an animal study

PURPOSE

To evaluate the biocompatibility of collagen membranes for host-graft integration.

METHODS

18 Achilles tendons in 9 rats were used. Five tendons were controls and repaired with prolene 3-0 sutures only. The remaining 13 tendons were cases, and a 10-mm section was excised. A 15x5 mm bovine pericardial collagen membrane (Tutomesh; Tutogen Medical, Germany) was laid circumferentially around the tendon and secured with prolene 3-0 sutures. Tendons were harvested after 4 and 6 weeks. Only the repair interfaces (i.e. cut ends and immediate surrounding tissue) were evaluated. Integration of the membranes to the tendons was evaluated using a semi-quantitative wound maturation scale (1-4) based on the presence of inflammatory cells, vascularisation, fibroblasts, and the amount and alignment of collagen fibrils. The presence of fibroblasts and vascularisation were positive parameters, whereas inflammatory cell ratios were regarded as negative parameters. Immunohistochemical study was also performed.

RESULTS

There was no host-graft reaction or wound complication (infection, abscess or seroma). Histological and immunohistochemical assessment confirmed re-approximation of the cut tendon ends and incorporation of the membrane onto the tendon as early as week 4. At week 4, the mean maturation scale scores were 2.7 for controls and 3.3 for cases (p=0.11). At week 6, the corresponding values were 3.8 and 3.0 (p=0.004). A reparative process involving formation of blood vessels and invasion by fibroblasts was noted in both control and case tendons. In controls, T- and B-lymphocytes were present. In cases, inflammatory cells were noted at the junction of the host and membrane without invasion of the graft material. There was no lymphocytic infiltration on the graft. The foreign body reaction was localised and minimal.

CONCLUSION

The collagen membrane achieved favourable host-graft integration as early as week 4, with a minimal foreign body reaction.