Long-term Radiographic Outcome of Occipitocervical Fixation: An Analysis of Fusion Rate and Spontaneous Subaxial Alignment Change at an Average 7-year Follow-up

Horizontal Gaze Assessment: An Extensive Narrative Review

OBJECTIVE

Bipedalism was a significant milestone in the evolutionary development of Homo sapiens sapiens, influencing neocortical evolution and subsequent behavioral changes. Coordinated visual and sensory inputs are crucial for posture, environmental interaction, and surgical planning, with horizontal gaze being a pivotal parameter. This narrative review aims to explore various geometric measures used to assess horizontal gaze in patients, highlighting their applications in surgical planning.

METHODS

A literature review was conducted in indexed databases using Mesh terms like "Cervical Vertebrae" and "Visual Fields" along with keywords such as "horizontal gaze" and "sagittal spine parameters." Among 477 initially identified articles, 41 were selected for inclusion after rigorous filtering.

RESULTS

The most recognized method for assessing horizontal gaze is the Chin Brow Vertical Angle (CBVA), initially described in patients with ankylosing spondylitis. Clinical photography is employed as a tool for CBVA calculation, while other measures like McGregor slope and Slope of the Line of Sight have been considered as alternatives to CBVA. Each method presents its unique advantages and limitations.

CONCLUSIONS

This review highlights the need for further research into horizontal gaze measurement methods. Developing novel approaches to determine horizontal gaze can significantly enhance surgical planning and, consequently, improve patient outcomes. The ongoing exploration of these geometric measures offers promising prospects for advancing the field and optimizing patient care.

Radiographic Predictors of Subaxial Subluxation After Atlantoaxial Fusion

STUDY DESIGN

A retrospective study.

OBJECTIVE

The aim of this study was to clarify preoperative radiographic predictors associated with the development of subaxial subluxation (SAS) after surgery.

BACKGROUND

The incidence of atlantoaxial fusion for atlantoaxial instability has been increasing. SAS can develop after surgery despite atlantoaxial fusion with the optimal C1-C2 angle. We hypothesized that preoperative discordant angular contribution in the upper and subaxial cervical spine is associated with the occurrence of postoperative SAS.

MATERIALS AND METHODS

Patients who underwent surgery for atlantoaxial instability with a minimum 5-year follow-up and control participants were included. The O-C2 angle, C2 slope (C2S), C2-C7 cervical lordosis (CL), and T1 slope (T1S) were measured. We focused on the angular contribution ratio in the upper cervical spine to the whole CL, and the preoperative C2/T1S ratio was defined as the ratio of C2S to T1S.

RESULTS

Twenty-seven patients (SAS=11, no-SAS=16; mean age, 60.7 y old; 77.8% female; mean follow-up duration, 6.8 y) and 23 demographically matched control participants were enrolled. The SAS onset was at 4.7 postoperative years. Preoperatively, the O-C2 angle, C2-C7 CL, and T1S were comparable between the SAS, no-SAS, and control groups. The preoperative C2S and C2/T1S ratio were smaller in the SAS group than in the no-SAS or control group (C2S, 11.0 vs. 18.4 vs. 18.7 degrees; C2/T1S ratio, 0.49 vs. 0.77 vs. 0.78, P <0.05). The receiver operating characteristic curve analysis demonstrated that the C2/T1S ratio had higher specificity and similar sensitivity as a predictor of postoperative SAS than C2S (specificity: 0.90 vs. 0.87; sensitivity: 0.73 vs. 0.73). The estimated cutoff values of the C2S and C2/T1S ratio were 14 degrees and 0.58, respectively.

CONCLUSIONS

The preoperative C2/T1S ratio was closely associated with postoperative SAS. Patients with a C2/T1S ratio <0.58 were at a high risk of SAS after atlantoaxial fusion.

LEVEL OF EVIDENCE

Level 4.

Comparative Study of Surgical Outcomes of Occipitocervical and Atlantoaxial Fusion for Retro-Odontoid Pseudotumor

OBJECTIVE

To compare the surgical and radiographic outcomes of occipitocervical fusion (OCF) with those of atlantoaxial fusion (AAF) in patients with cervical myelopathy caused by retroodontoid pseudotumors (ROPs).

METHODS

This retrospective, comparative study included 26 patients; 12 underwent occipitocervical fusion (OCF) (group O) and 14 retroodontoid pseudotumor (AAF) (group A) with a minimum 2-year follow-up. Neurologic outcomes were evaluated using the Japanese Orthopedic Association (JOA) score. Radiologic assessment included the maximum anteroposterior (AP) diameter of the anteroposterior-retroodontoid pseudotumor (AP-ROP), C2-7 angle, O-C2 angle, C1-2 angle, atlantodental interval (ADI), range of motion (ROM) of the ADI, C2-C7 sagittal vertical axis (C2-7 SVA), and T1 slope. Global spinal alignments (pelvic incidence [PI] minus lumbar lordosis [LL] [PI-LL], pelvic tilt, sacral slope, and C7 sagittal vertical axis) were also compared between the groups.

RESULTS

Both groups had equally good clinical outcomes with equal complication rates. Three patients had a three-level fusion, 5 cases had a four-level fusion, and 4 cases had more than five-level fusion in group O. All cases had a single-level fusion in group A. Surgical time was significantly shorter in group A. AP-ROP was significantly downsized postoperatively in both groups and was more prominent in group O. C2-7 SVA was significantly increased and C2-7A ROM was significantly reduced in group O at the final follow-up. The PI-LL showed a significant increase in group O at the final follow-up.

CONCLUSIONS

Although OCF and AAF were similarly effective for cervical myelopathy with ROP, AAF was less invasive, and spinal alignment was better maintained postoperatively in AAF than OCF.

Trabecular volumetric bone mineral density of the occipital bone at preferred screw placement sites measured by quantitative computed tomography

This study aimed at quantifying trabecular volumetric bone mineral density (vBMD) at the external occipital protuberance (EOP) and the upper cervical spine. A retrospective review of patients who underwent non-contrast enhanced computed tomography of the cervical spine that included the occipital bone up to the EOP between 2007 and 2020 was conducted. Measurements of trabecular vBMD were performed in the occipital midline area, with the region of interest extending 4.5 mm above and below the center of the EOP, as well as the C1 lateral masses and the C2 vertebral body using asynchronous quantitative computed tomography. Eighty-six patients (female, 37.2%) were included for analysis. The patient population was 81.4% Caucasian with a mean ± SD age of 62.3 ± 13.1 years. Total bone thickness at the EOP was 16.7 ± 3.4 mm, with a ratio of trabecular to total bone thickness of 0.44. Trabecular vBMD (mean ± SD) was significantly higher at the EOP than at C1 and C2 (EOP = 612.3 ± 145.8 mg/cm³ , C1 average = 290.3 ± 66.5 mg/cm³ , C2 = 305.8 ± 78.8 mg/cm³ ; p < 0.001). A significant strong correlation between trabecular vBMD of C1 and C2 was observed (r = 0.744; p < 0.001), but only low correlations between the EOP and C1 (r = 0.295; p = 0.008) and C2 (r = 0.413; p < 0.001). In individuals > 65 years of age, cervical vBMD was significantly lower, but remained high at the EOP. Clinical significance: Trabecular vBMD at the EOP is significantly higher than at the upper cervical vertebrae and remains high in older populations. Together with morphological information about the occipital bone, these results might be helpful for occipitocervical fixation when deciding about uni- or bicortical screw placement at the EOP.

The predictive ability of occipital to C3 angle for dysphagia after occipitocervical fusion in patients with combined C2-3 Klippel-Feil syndrome

Background

Improper occipitocervical alignment after occipitocervical fusion (OCF) may lead to devastating complications, such as dysphagia and/or dyspnea. The occipital to C2 angle (O-C2a), occipital and external acoustic meatus to axis angle (O-EAa) have been used to evaluate occipitospinal alignment. However, it may be difficult to identify the inferior endplate of the C2 vertebra in patients with C2–3 Klippel-Feil syndrome (KFS). The purpose of this study aimed to compare four different parameters for predicting dysphagia after OCF in patients with C2–3 KFS.

Methods

There were 40 patients with C2–3 KFS undergoing OCF between 2010 and 2019. Radiographs of these patients were collected to measure the occipital to C3 angle (O-C3a), O-C2a, occipito-odontoid angle (O-Da), occipital to axial angle (Oc-Axa), and narrowest oropharyngeal airway space (nPAS). The presence of dysphagia was defined as the patient complaining of difficulty or excess endeavor to swallow. Patients were divided into two groups according to whether they had postoperative dysphagia. We evaluated the relationship between each of the angle parameters and nPAS and analyzed their influence to the postoperative dysphagia.

Results

The incidence of dysphagia after OCF was 25% in patients with C2–3 KFS. The Oc-Axa, and nPAS were smaller in the dysphagia group compared to non-dysphagia group at the final follow-up (p < 0.05). Receiver-operating characteristic (ROC) curves showed that dO-C3a had the highest accuracy as a predictor of the dysphagia with an area under the curve (AUC) of 0.868. The differences in O-C3a, O-C2a, O-Da, and Oc-Axa were all linearly correlated with nPAS scores preoperatively and at the final follow-up within C2–3 KFS patients, while there was a higher R² value between the dO-C3a and dnPAS. Multiple linear regression analysis showed that the difference of O-C3a was the only significant predictor for dnPAS (β = 0.670, p < 0.001).

Conclusions

The change of O-C3a (dO-C3a) is the most reliable indicator for evaluating occipitocervical alignment and predicting postoperative dysphagia in C2–3 KFS patients. Moreover, dO-C3a should be more than − 2° during OCF to reduce the occurrence of postoperative dysphagia.