Novel Hemi-Staple for the Fusionless Correction of Pediatric Scoliosis: Influence on Intervertebral Disks and Growth Plates in a Porcine Model

The Use of Shape-Memory Alloy Staples (Nitinol) in the Treatment of Pubic Symphyseal Disruptions: Clinical Results and Radiographic Outcomes

Nitinol is a shape-memory alloy that has many diverse applications in the field of orthopedics. There have been no previous investigations reporting clinical or radiographic outcomes of the use of nitinol staples in the definitive stabilization of the pubic symphysis. A retrospective chart review was completed on 42 patients who underwent operative stabilization of pubic symphyseal disruption at an urban level-1 trauma center. Patients treated with pelvic staples alone, or in conjunction with traditional plates and screws, were compared with those treated without the use of a shape memory alloys. Thirty-four patients were included for final analysis (8 staples and 26 controls) in this investigation. Three of eight patients in the pelvic staple group had implant failures, with two having a loss of reduction (25%); this was not significantly different from the seven hardware failures (P = 0.61) seen in the control group without any loss of reduction (P = 0.17). Failures in the nitinol staple group occurred earlier at 17.3 days compared with the control group at 101.7 days (P = 0.003). There were no significant differences between groups with regards to any of the other pre- or postoperative variables investigated. The use of nitinol staples vs. traditional plate and screw constructs for stabilizing the pubic symphysis did not result in more clinical failures. The hardware failures identified in the nitinol staple group occurred significantly earlier in the postoperative period, and were associated with a loss of reduction of the pubic symphysis.

Does vertebral body tethering cause disc and facet joint degeneration? A preliminary MRI study with minimum two years follow-up

BACKGROUND CONTEXT

Vertebral body tethering (VBT), a flexible compression-based growth modulation technique, was claimed to prevent disc degeneration due to its less rigid nature compared to other growth-friendly techniques. Yet, the consequences of VBT surgery on discs and facet joints have not been precisely acknowledged.

PURPOSE

The purpose of this study was to determine the changes in the intermediate and adjacent levels at least 2 years after surgery.

STUDY DESIGN/SETTING

Prospectively-followed consecutive patient cohort PATIENT SAMPLE: Adolescent idiopathic scoliosis patients who underwent thoracoscopic VBT between 2014 and 2017 were included.

OUTCOME MEASURES

Degeneration of the intervertebral discs using the Pfirrmann classification; Degeneration of facet joints using a scale of 0 to 3.

METHODS

Demographic, perioperative, clinical, radiographic data were collected. Skeletal maturity and height gain were assessed in every follow-up. Overcorrection, tether breakage, mechanical and pulmonary complications as well as readmission and reoperations were recorded. MRIs taken before surgery and at a minimum of 2 years follow-up were evaluated for degeneration at the intermediate and adjacent segment intervertebral discs and facet joints by a blinded senior radiologist and compared.

RESULTS

Twenty-five patients with a mean of 38.6±10.6 months (24-62) of follow-up were included. The mean age at surgery was 12.2 (10-14), and the median Sanders stage was 3 (1-7). A mean of 7.7±1.1 (6-11) levels were tethered. The mean preoperative main thoracic curve magnitude of 46°±7.7° was corrected to 23.3°±5.9° postoperatively, which was subsequently modulated to 12° ±11.5° during the follow-up. At the time of the MRI (mean 29±9.5 (24-62) months), the median Sanders stages was 7 (5-8). A total of 217 levels of discs and bilateral facet joints were evaluated in the preoperative and follow-up MRI images. Analyses of disc and facet scores revealed no significant differences between patients. Deterioration of previously degenerated discs was noted in one patient (from grade 2 to 3), while previously healthy lower adjacent facet joints were degenerated (grade 2) in another patient.

CONCLUSIONS

Intermediate discs and facet joints were preserved after growth modulation with VBT surgery at a mean of 29 months of follow-up. Studies in larger cohorts with longer follow-up are warranted to have more in-depth analyses of the effects of relative stabilization and altered biomechanical loads.

Fracture Fixation Using Shape-Memory (Ninitol) Staples

Shape-memory alloy (SMA) staples are a recent innovation in fracture fixation. These staples have inherent compressive properties that create a stable fracture environment that promotes primary bone healing. They have been used successfully for osteotomies, arthrodesis, and fracture fixation. Understanding where SMA staple compression can be optimized and using proper indications are important for obtaining consistent success and minimizing failures. SMA staples are not a substitute for lag screw fixation or traditional plate and screw constructs.

3D correction over 2years with anterior vertebral body growth modulation: A finite element analysis of screw positioning, cable tensioning and postoperative functional activities

BACKGROUND

Anterior vertebral body growth modulation is a fusionless instrumentation to correct scoliosis using growth modulation. The objective was to biomechanically assess effects of cable tensioning, screw positioning and post-operative position on tridimensional correction.

METHODS

The design of experiments included two variables: cable tensioning (150/200N) and screw positioning (lateral/anterior/triangulated), computationally tested on 10 scoliotic cases using a personalized finite element model to simulate spinal instrumentation, and 2years growth modulation with the device. Dependent variables were: computed Cobb angles, kyphosis, lordosis, axial rotation and stresses exerted on growth plates. Supine functional post-operative position was simulated in addition to the reference standing position to evaluate corresponding growth plate's stresses.

FINDINGS

Simulated cable tensioning and screw positioning had a significant impact on immediate and after 2years Cobb angle (between 5°-11°, p<0.01). Anterior screw positioning significantly increased kyphosis after 2years (6°-8°, p=0.02). Triangulated screw positioning did not significantly impact axial rotation but significantly reduced kyphosis (8°-10°, p=0.001). Growth plates' stresses were increased by 23% on the curve's convex side with cable tensioning, while screw positioning rather affected anterior/posterior distributions. Supine position significantly affected stress distributions on the apical vertebra compared to standing position (respectively 72% of compressive stresses on convex side vs 55%).

INTERPRETATION

This comparative numerical study showed the biomechanical possibility to adjust the fusionless instrumentation parameters to improve correction in frontal and sagittal planes, but not in the transverse plane. The convex side stresses increase in the supine position may suggest that growth modulation could be accentuated during nighttime.

Modulation of spinal shape with growth following implantation of a novel surgical implant

PURPOSE

First, to determine whether scoliosis development could be limited or reversed by growth when a novel modular hinged implant was fixed to the convexity of a scoliosis created by contralateral rib and laminar tethering and unilateral rib resection in a sheep model. Second, to assess the effect and performance of the implant in normal non-tethered sheep.

METHODS

At 5 weeks, 20 Scottish Blackface lambs underwent surgery to create a right sided scoliosis by (i) tethering the left lamina of T5-L1 and the left lower six ribs and (ii) resecting a segment of their right lower six ribs [1, 2]. Twelve weeks later, through an antero-lateral thoracotomy, a mobile bi-planar hinged implant was inserted onto the right side of the spine of eight animals (group 1). For comparison, 12 sheep were tethered only but had no implant insertion (group 2). In addition, seven had no tethering but were implanted (group 3) and normal growth patterns were observed in five that had no surgery (group 4). Curve progression was assessed by plain radiography and CT over a 1-year period.

RESULTS

Before implant insertion the trial animals had a scoliosis of 35º ± 16º and a lordosis of 44º ± 20º (n = 8, mean ± SD). Surgery immediately reduced these values to 25º ± 14º, p < 0.01 and 35º ± 18º, p < 0.001, with scoliosis continuing to decrease during the next three months. Spinal flexibility was retained. In the un-tethered sheep, a scoliosis of 10º ± 6º was created on the opposite side to the implant (p < 0.05) with no significant change in alignment in the sagittal plane (1º ± 6º). The implant did not cause any adverse effect on growth or affect neurological function.

CONCLUSIONS

In the un-tethered animals the effect of the implant was to create a scoliotic deformity and in the tethered to improve deformity while maintaining spinal motion. We believe that the results are promising and that devices of similar construct may be of use in children with scoliosis, potentially changing current methods of clinical care.

Evaluation of an apparatus to be combined with a smartphone for the early detection of spinal deformities

BACKGROUND

Mobile smartphones are equipped with inclinometers enabling them to acquire angular clinical measures. The Scolioscreen has been developed in conjunction with a smartphone APP to enable the measure of the angle of trunk inclination (ATI) thus offering a convenient and reliable means to measure and screen for spinal deformities. The objective was to compare the reliability and accuracy of a Scolioscreen-smartphone combination, a smartphone alone, and a Scoliometer, for measuring the angle of trunk inclination in spinal deformities under blinded conditions for intra- and inter-observer analyses.

METHODS

A cohort of 39 patients with adolescent idiopathic scoliosis were recruited. Each had maximum ATI measured by 3 observers: attending spine surgeon, nurse, and parent presenting with patient. Two series of measurements were performed by each observer using Scolioscreen-smartphone, smartphone alone and Scoliometer. Intra-class correlation coefficients (ICC) from two-way mixed model based on absolute agreement were used to assess intra- and inter-observer reliability as well as consistency between measurement techniques.

RESULTS

Intra- and inter-observer reliability for measuring maximum ATI was 0.94-0.89 with Scolioscreen-smartphone, decreased to 0.89-0.75 for smartphone alone, and was 0.95- 0.89 for Scoliometer. Considering Scoliometer measurement taken by surgeon the gold standard, there was excellent consistency with measurements from Scolioscreen-smartphone taken by surgeon (ICC = 0.99), nurse (ICC = 0.95), and parent (ICC = 0.91). Conversely, consistency decreased when surgeon (ICC = 0.86), nurse (ICC = 0.86) and parent (ICC = 0.85) used smartphone alone.

CONCLUSION

Study shows the Scolioscreen-smartphone to overcome limitations associated with ATI measurements using smartphones alone. The Scolioscreen-smartphone provides a reliability and consistency similar to the gold standard (use of Scoliometer by spine surgeon) and enables a parent to take reliable measurements on their own thus offering an accessible and convenient tool for all to use.