“Top 10” Technical Pearls for Successfully Performing Hip Resurfacing Arthroplasty

The 20-year results of the first 400 Conserve Plus hip resurfacing arthroplasties

AIMS

Adverse local tissue reactions associated with abnormal wear considerably slowed down the general use of metal-on-metal (MoM) hip resurfacing arthroplasty (HRA), now limited to a few specialized centres. In this study, we provide the clinical results of 400 consecutive MoM HRAs implanted more than 20 years ago in one such centre.

METHODS

A total of 355 patients (400 hips) were treated with Conserve Plus HRA between November 1996 and November 2000. There were 96 female (27%) and 259 male patients (73%). Their mean age was 48.2 years (SD 10.9). The University of California, Los Angeles (UCLA) hip scores and 12-item Short Form Survey (SF-12) quality of life scores were reported. Survivorship was assessed using Kaplan-Meier analyses.

RESULTS

The mean follow-up was 16.5 years (0.1 to 24.0), including 34 patients (37 hips) who died. The mean UCLA hip scores were 9.3 (2 to 10), 9.1 (3 to 10), 9.0 (3 to 10), and 6.9 (2 to 10) for pain, walking, function, and activity, respectively. The mean SF-12 scores were 48.4 (16.0 to 62.1) for the physical component and 48.5 (10.5 to 66.5) for the mental component, and did not differ from those of the general population of the USA. A total of 60 hips in 55 patients were revised. Using revision for any indication as the endpoint, the Kaplan-Meier survivorship was 83.5% at 20 years. A diagnosis of developmental dysplasia (hazard ratio (HR) 2.199 (95% confidence interval (CI) 1.140 to 4.239); p = 0.019) and a low BMI (HR 0.931 (95% CI 0.873 to 0.994); p = 0.032) were risk factors for revision. Female sex was a risk factor only because of hip dysplasia and small component size. There were no cases of metal sensitivity associated with revision surgery. Radiological analysis showed persistent fixation in all but one hip.

CONCLUSION

The 83.5% 20-year survivorship of this initial series surpasses that of total hip arthroplasties in use 20 years ago in these young patients, suggesting satisfactory lifelong durability of the device for almost all of the remaining patients. Cite this article: Bone Joint J 2021;103-B(7 Supple B):25-32.

Sex-specific risk factors determine the survivorship of female and male patients after metal-on-metal hip resurfacing

BACKGROUND

The need for revision surgery after hip resurfacing arthroplasty (HRA) is more prevalent for women than for men. However, there is a paucity of information to explain this observation. We aimed (1) to determine sex-specific risk factors leading to revision surgery; and (2) to correlate these risk factors to the dominant modes of failure of HRA.

METHODS

1101 patients (1375 consecutive hips) including 292 women (355 hips) and 809 men (1020 hips) with a mean age of 51.3 years were included regardless of bone quality. The contact patch to rim distance was computed.

RESULTS

A contact patch to rim (CPR) distance of ⩽7 mm, an aetiology of developmental dysplasia, a postoperative abduction-adduction arc of ⩾95°, and a metaphyseal stem left uncemented were risk factors associated with revision surgery for female patients, while a CPR distance of ⩽10 mm, a component size of ⩽46 mm, an age at surgery of ⩽55 years, and an early femoral preparation technique were risk factors for male patients. Hips with no risk factors from the female group had a survivorship of 98.7% at 15 years, matching or exceeding the results of all male subgroups. However the risk factors in the female group increased the risk of revision much more than in the male group.

CONCLUSIONS

In the absence of risk factors, the survivorship of HRA in female patients is equal to that of males. Many female patients can safely benefit from HRA by excluding severe dysplasia and optimising surgical technique.

Effects of physical activity on long-term survivorship after metal-on-metal hip resurfacing arthroplasty: is it safe to return to sports?

AIMS

In previous studies, we identified multiple factors influencing the survivorship of hip resurfacing arthroplasties (HRAs), such as initial anatomical conditions and surgical technique. In addition, the University of California, Los Angeles (UCLA) activity score presents a ceiling effect, so a better quantification of activity is important to determine which activities may be advisable or detrimental to the recovered patient. We aimed to determine the effect of specific groups of sporting activities on the survivorship free of aseptic failure of a large series of HRA.

PATIENTS AND METHODS

A total of 661 patients (806 hips) representing 77% of a consecutive series of patients treated with metal-on-metal hybrid HRA answered a survey to determine the types and amounts of sporting activities they regularly participated in. There were 462 male patients (70%) and 199 female patients (30%). Their mean age at the time of surgery was 51.9 years (14 to 78). Their mean body mass index (BMI) was 26.5 kg/m² (16.7 to 46.5). Activities were regrouped into 17 categories based on general analogies between these activities. Scores for typical frequency and duration of the sessions were used to quantify the patients' overall time spent engaging in sporting activities. Impact and cycle scores were computed. Multivariable models were used.

RESULTS

We found no association between any category of activity and a decrease in survivorship. Impact and hip cycle scores also failed to show any association with revision for aseptic failure or wear.

CONCLUSION

Return to sporting activities after surgery is safe for patients treated with well-designed and well-implanted HRA. Cite this article: Bone Joint J 2019;101-B:1186-1191.

Aseptic loosening of cobalt chromium monoblock sockets after hip resurfacing

INTRODUCTION

Acetabular component loosening is a leading cause for revision after metal-on-metal hip resurfacing arthroplasty (MMHRA). We aimed to identify potential risk factors and determine radiographic signs associated with this mode of failure.

METHODS

From a series of 1375 hips treated with MMHRA, 21 (20 patients) underwent revision surgery secondary to aseptic loosening of the acetabular component and 6 patients had a radiographically loose acetabular component. A control group of 27 hips (26 patients) was selected among the patients that did not have a revision, and was matched for age, gender, component size and diagnosis.

RESULTS

Mean time to revision in the loosening group was 103.0 months and the mean time of follow-up in the control group was 161.4 months. We found greater activity levels, range of motion scores, and cup abduction angles in the loosening group. The centre-edge (CE) angle of Wiberg was 10° lower in the loosening group compared with the control group. In addition, 11 of the hips from the study group presented a sclerotic halo superior to the cup on the last radiograph vs. none in the control group. There was no difference in the prevalence of postoperative reaming gaps or radiographic signs of neck-cup impingement between the 2 groups.

DISCUSSION

Risk factors for acetabular loosening included hip dysplasia with low CE angle, and a large cup abduction angle. The patient's level of activity influences the appearance of symptoms and the time to revision. We recommend selecting patients with a sufficient CE angle and properly orienting the cup.

Hip resurfacing for osteonecrosis

Aims

Hip resurfacing arthroplasty (HRA) is an alternative to conventional total hip arthroplasty for patients with osteonecrosis (ON) of the femoral head. Our aim was to report the long-term outcome of HRA, which is not currently known.

Patients and Methods

Long-term survivorship, clinical scores and radiographic results for 82 patients (99 hips) treated with HRA for ON over a period of 18 years were reviewed retrospectively. The mean age of the 67 men and 15 women at the time of surgery was 40.8 years (14 to 64). Patients were resurfaced regardless of the size of the osteonecrotic lesion.

Results

The mean clinical follow-up was 10.8 years (2 to 18). The mean University of California, Los Angeles hip scores at the last follow-up were 9.3, 9.4, 9.2 and 6.8 for pain, walking, function and activity, respectively. A total of six hips underwent revision surgery, four for loosening of the femoral component and two for loosening of the acetabular component. Using any revision as an end point, the 15-year Kaplan-Meier survivorship was 90.3%. There were no wear-related failures. There were no femoral failures among the hips reconstructed with a cemented metaphyseal stem. A total of five hips showed narrowing of the femoral neck; all stabilised and remain asymptomatic, 21 showed signs of femoral neck impingement.

Conclusion

To our knowledge, this is the first report of a series of HRA performed for ON with 15-year survivorship. Our data confirm that patients with advanced stages of ON of the femoral head are excellent candidates for HRA. Cite this article: Bone Joint J 2016;98-B:901–9.

Hip resurfacing: history, current status, and future

Hip resurfacing arthroplasty (HRA) presents several advantages over conventional total hip arthroplasty (THA), including conservation and preservation of bone, reduced risk of dislocation, easy replication of hip biomechanics and easy revision if needed. It is a particularly appealing procedure for young patients. HRA has been performed for over 40 years following the same technological advances as THA. The bearing material used by most designs is metal-on-metal (MoM), which has the best compromise between strength and wear properties. However, MoM HRA has a specific set of possible complications. Aseptic femoral failures were initially the most prevalent cause for revision but progress in patient selection and surgical technique seem to have resolved this problem. Wear-related failures (high metal ion levels and adverse local tissue reactions) are now the main concern, and are essentially associated with poor acetabular component design and orientation, to which MoM is more sensitive than other bearing materials. The concept of functional coverage is key to understanding how MoM bearings are affected by edge wear. Only a 3-D assessment of cup position (e.g., the contact patch to rim distance) provides the necessary information to determine the role of cup positioning in relationship with abnormal bearing wear.The concept of hip resurfacing is more valid today than ever as the age of the patients in need of hip arthroplasty keeps getting lower. The recent publication of several excellent long-term survivorship results suggests that selection of a well-designed resurfacing system and accuracy in the placement of the cup can achieve long-term durability.

Are There Long-term Benefits to Cementing the Metaphyseal Stem in Hip Resurfacing?

BACKGROUND

Cementing the metaphyseal stem during hip resurfacing surgery improves the initial fixation of the femoral component. However, there may be long-term detrimental effects such as stress shielding or an increased risk of thermal necrosis associated with this technique.

QUESTIONS/PURPOSES

We compared (1) long-term survivorship free from radiographic femoral failure, (2) validated pain scores, and (3) radiographic evidence of component fixation between hips resurfaced with a cemented metaphyseal stem and hips resurfaced with the metaphyseal stem left uncemented.

METHODS

We retrospectively selected all the patients who had undergone bilateral hip resurfacing with an uncemented metaphyseal stem on one side, a cemented metaphyseal stem on the other side, and had both surgeries performed between July 1998 and February 2005. Forty-three patients matched these inclusion criteria. During that period, the indications for cementing the stem evolved in the practice of the senior author (HCA), passing through four phases; initially, only hips with large femoral defects had a cemented stem, then all stems were cemented, then all stems were left uncemented. Finally, stems were cemented for patients receiving small femoral components (< 48 mm) or having large femoral defects (or both). Of the 43 cemented stems, two, 13, 0, and 28 came from each of those four periods. All 43 patients had complete followup at a minimum of 9 years (mean, 143 ± 21 months for the uncemented stems; and 135 ± 22 months for the cemented stems; p = 0.088). Survivorship analyses were performed with Kaplan-Meier and Cox proportional hazards ratios using radiographic failure of the femoral component as the endpoint. Pain was assessed with University of California Los Angeles (UCLA) pain scores, and radiographic femoral failure was defined as complete radiolucency around the metaphyseal stem or gross migration of the femoral component.

RESULTS

There were four failures of the femoral component in the press-fit stem group while the cemented stem group had no femoral failures (p = 0.0471). With the numbers available, we found no differences between the two groups regarding pain relief or radiographic appearance other than in patients whose components developed loosening.

CONCLUSIONS

Cementing the metaphyseal stem improves long-term implant survival and does not alter long-term pain relief or the radiographic appearance of the proximal femur as had been a concern based on the results of finite element studies. We believe that patients with small component sizes and large femoral head defects have more to gain from the use of this technique which adds surface area for fixation, and there is no clinical downside to cementing the stem in patients with large component sizes.

LEVEL OF EVIDENCE

Level III, therapeutic study.

Does femoral neck to cup impingement affect metal ion levels in hip resurfacing?

BACKGROUND

Impingement of the femoral neck with the acetabular component after metal-on-metal hip resurfacing arthroplasty (HRA) is a possible cause of edge loading and accelerated bearing wear. No attempt has been made to correlate radiographic impingement signs and blood metal ion levels.

QUESTIONS/PURPOSES

We (1) compared serum cobalt (CoS) and chromium (CrS) concentrations between patients with and without radiographic impingement signs treated with unilateral HRA, (2) determined whether divot depth on the femoral neck correlated with CoS and CrS, and (3) assessed the predictive value of radiographic impingement signs for high levels of CoS and CrS.

METHODS

A retrospective radiographic review of 141 patients with CoS and CrS analyses yielded 21 patients with and 120 without radiographic impingement signs (controls). Radiographic measurements included divot depth and orientation of the acetabular component to compute the contact patch to rim distance, a measure of functional head coverage. We defined a patient as having radiographic impingement signs if a remodeling of the femoral neck cortex showed a depression matching the predicted path of an impinging acetabular component. CoS and CrS were analyzed by inductively coupled plasma mass spectrometry and the radiographs were taken within 12 months of the last blood draw.

RESULTS

Median CoS and CrS were greater in the impingement group than in controls in patients with less than 10-mm contact patch to rim distances. Divot depth did not correlate with CoS or CrS. In predicting elevated ion levels (≥ 7 μg/L), the presence of a radiographic impingement sign showed a sensitivity of 50% for CoS and 33% for CrS and a specificity of 87% for both CoS and CrS.

CONCLUSIONS

Radiographic impingement signs influenced CoS and CrS only when the functional head coverage was insufficient due to poor socket positioning. Radiographic impingement signs alone were not a good predictor of elevated metal ion levels.

Complications after metal-on-metal hip resurfacing arthroplasty

This article determines the incidence and cause of the complications commonly associated with metal-on-metal hip resurfacing implants and the proposed methods to prevent these complications. The literature available in PubMed was reviewed. Complication rates after hip resurfacing are low, and the procedure has shown both safety and efficacy in the hands of surgeons trained in specialized centers. Proper surgical technique can further reduce the incidence of femoral neck fracture, component loosening, and abnormal wear of the prosthesis. A more systematic detection of adverse local tissue reactions is needed to provide accurate assessments of their prevalence.