Reduction of Occupational Exposure Using a Novel Tungsten-Containing Rubber Shield in Interventional Radiology

Double enhancement effect of a surface dose with tungsten rubber bolus in photon radiotherapy for keloids and superficial tumors

To clarify the dosimetric characteristics of a real-time variable shape rubber-containing tungsten (STR) bolus in a clinical plan and investigate the efficacy of the STR bolus in photon radiotherapy for keloids and other superficial tumors. A 5 mm gel bolus or 1 mm STR bolus was placed on a solid water phantom. Tangential irradiation was performed using a TomoTherapy Radixact-X9 and 6 MV X-ray flattening-filter-free beam, and the surface dose was measured with radiochromic film. Clinical-like plans (TomoDirect; TD and TomoHelical; TH) were applied with the same geometry and the dose distributions were measured. The increase in surface dose by the build-up effect and backscatter was 37.7% and 8.0% for the gel bolus, and 40.5% and 26.4% for the STR bolus, respectively. In the TD and TH plans, the increase in surface dose was 27.4% and 48.3% for the gel bolus, and 39.0% and 63.2% for the STR bolus. Similary, changes in the sagittal plane dose were - 3.9% and 6.1% for the gel bolus, and - 6.3% and 6.9% for the STR bolus. The STR bolus effectively increased the surface dose by the build-up effect and backscatter in photon radiotherapy for keloids and other superficial tumors.

Estimating radiation exposure of the brain of a physician with a protective flap in interventional radiology: A phantom study

PURPOSE

The efficiency of protective equipment for the brain has not been verified at the left anterior oblique (LAO) position, which is commonly used in clinical procedures. The purpose of this study was to investigate radiation exposure of the brain in interventional radiology (IR) and the shielding ability of a new protective flap.

METHODS

We made a flap that combined a protective cap with a left lateral face shield. The flap was made of tungsten-containing rubber (TCR). An anthropomorphic head phantom was placed at the physician's position, and air kerma rates (μGy/min and μGy/15s) were measured by electronic dosimeter at three locations: the surface of the left side of the head, and the left and right temporal lobes with the protective cap and the flap in fluoroscopy and cine modes. The X-ray tube was at the lower left side of the physician, and its angles were LAO60 and LAO60CAU40. The tube voltage (95-125 kV), tube current (4.7-732 mA), and air kerma rate (27.8-1078 mGy/min) were automatically adjusted by the X-ray system. We obtained the cap and the flap shielding efficiencies.

RESULTS

In cine mode at LAO60CAU40, the shielding efficiencies on the surface of the left side of the head and left temporal lobe with the cap were 92.6% and 5.1%, respectively, and the corresponding shielding efficiencies with the flap were 92.5% and 86.1%, respectively. The flap can reduce radiation exposure of the brain more than the cap alone.

CONCLUSIONS

At the left anterior oblique in interventional radiology, the flap can reduce exposure to the brain.

Dosimetric characteristics of a thin bolus made of variable shape tungsten rubber for photon radiotherapy

In this study, we aim to clarify the dosimetric characteristics of a real time variable shape rubber containing tungsten (STR) as a thin bolus in 6-MV photon radiotherapy. The percentage depth doses (PDDs) and lateral dose profiles (irradiation field = 10 × 10  cm²) in the water-equivalent phantom were measured and compared between no bolus, a commercial 5-mm gel bolus, and 0.5-, 1-, 2-, and 3-mm STR boluses. The characteristics of the PDDs were evaluated according to relative doses at 1 mm depth (D_1mm) and depth of maximum dose (d_max). To determine the distance of the shift caused by the STR bolus, the PDD value at a depth of 100 mm without a bolus was obtained. For each STR thickness, the difference between the depth corresponding to this PDD value and 100 mm was calculated. The penumbra size and width of the 50% dose were evaluated using lateral dose profiles. The D_1mm with no bolus, 5-mm gel bolus, and 0.5-, 1-, 2-, and 3-mm STR boluses were 47.6%, 91.5%, 78.2%, 86.6%, 89.3%, and 89.4%, respectively, and the respective d_max values were 15, 10, 13, 12, 11, and 10 mm. The shifting distance of the 0.5-, 1-, 2-, and 3-mm STR boluses were 2.7, 4.4, 4.8, and 4.9 mm, respectively. There were no differences for those in lateral dose profiles. The 1-mm-thick STR thin bolus shifted the depth dose profile by 4.4 mm and could be used as a customized bolus for photon radiotherapy.