Intraocular lens as a drug delivery reservoir

Progress in Ocular Drug Delivery: Challenges and Constraints

The eye has several dynamic and static barriers in place to limit the entry of foreign substances including therapeutics. As such, efficient drug delivery, especially to posterior segment tissues, has been challenging. This chapter describes the anatomical and physiological challenges associated with ocular drug delivery before discussing constraints with regard to formulation parameters. Finally, it gives an overview of advanced drug delivery technologies with a specific focus on recently marketed and late-stage clinical trial products.

Polysaccharide-based hydrogels for medical devices, implants and tissue engineering: A review

Hydrogels are highly biocompatible biomaterials composed of crosslinked three-dimensional networks of hydrophilic polymers. Owing to their natural origin, polysaccharide-based hydrogels (PBHs) possess low toxicity, high biocompatibility and demonstrate in vivo biodegradability, making them great candidates for use in various biomedical devices, implants, and tissue engineering. In addition, many polysaccharides also show additional biological activities such as antimicrobial, anticoagulant, antioxidant, immunomodulatory, hemostatic, and anti-inflammatory, which can provide additional therapeutic benefits. The porous nature of PBHs allows for the immobilization of antibodies, aptamers, enzymes and other molecules on their surface, or within their matrix, potentiating their use in biosensor devices. Specific polysaccharides can be used to produce transparent hydrogels, which have been used widely to fabricate ocular implants. The ability of PBHs to encapsulate drugs and other actives has been utilized for making neural implants and coatings for cardiovascular devices (stents, pacemakers and venous catheters) and urinary catheters. Their high water-absorption capacity has been exploited to make superabsorbent diapers and sanitary napkins. The barrier property and mechanical strength of PBHs has been used to develop gels and films as anti-adhesive formulations for the prevention of post-operative adhesion. Finally, by virtue of their ability to mimic various body tissues, they have been explored as scaffolds and bio-inks for tissue engineering of a wide variety of organs. These applications have been described in detail, in this review.

Clinical Translation of Long-Acting Drug Delivery Systems for Posterior Capsule Opacification Prophylaxis

Posterior capsule opacification (PCO) remains the most common cause of vision loss post cataract surgery. The clinical management of PCO formation is limited to either physical impedance of residual lens epithelial cells (LECs) by implantation of specially designed intraocular lenses (IOL) or laser ablation of the opaque posterior capsular tissues; however, these strategies cannot fully eradicate PCO and are associated with other ocular complications. In this review, we critically appraise recent advances in conventional and nanotechnology-based drug delivery approaches to PCO prophylaxis. We focus on long-acting dosage forms, including drug-eluting IOL, injectable hydrogels, nanoparticles and implants, highlighting analysis of their controlled drug-release properties (e.g., release duration, maximum drug release, drug-release half-life). The rational design of drug delivery systems by considering the intraocular environment, issues of initial burst release, drug loading content, delivery of drug combination and long-term ocular safety holds promise for the development of safe and effective pharmacological applications in anti-PCO therapies.

Innovation in the Development of Synthetic and Natural Ocular Drug Delivery Systems for Eye Diseases Treatment: Focusing on Drug-Loaded Ocular Inserts, Contacts, and Intraocular Lenses

Nowadays, ocular drug delivery still remains a challenge, since the conventional dosage forms used for anterior and posterior ocular disease treatments, such as topical, systemic, and intraocular administration methods, present important limitations mainly related to the anatomical complexity of the eye. In particular, the blood-ocular barrier along with the corneal barrier, ocular surface, and lacrimal fluid secretion reduce the availability of the administered active compounds and their efficacy. These limitations have increased the need to develop safe and effective ocular delivery systems able to sustain the drug release in the interested ocular segment over time. In the last few years, thanks to the innovations in the materials and technologies employed, different ocular drug delivery systems have been developed. Therefore, this review aims to summarize the synthetic and natural drug-loaded ocular inserts, contacts, and intraocular lenses that have been recently developed, emphasizing the characteristics that make them promising for future ocular clinical applications.

Recent Advances of Intraocular Lens Materials and Surface Modification in Cataract Surgery

Advances in cataract surgery have increased the demand for intraocular lens (IOL) materials. At present, the progress of IOL materials mainly contains further improving biocompatibility, providing better visual quality and adjustable ability, reducing surgical incision, as well as dealing with complications such as posterior capsular opacification (PCO) and ophthalmitis. The purpose of this review is to describe the research progress of relevant IOL materials classified according to different clinical purposes. The innovation of IOL materials is often based on the common IOL materials on the market, such as silicon and acrylate. Special properties and functions are obtained by adding extra polymers or surface modification. Most of these studies have not yet been commercialized, which requires a large number of clinical trials. But they provide valuable thoughts for the optimization of the IOL function.

Modeling the Effects of Disease, Drug Properties, and Material on Drug Transport From Intraocular Lenses

Purpose

Surgically implanted intraocular lenses (IOLs) may be used as drug-delivery devices, but their effectiveness is not well defined. Computational fluid dynamics models were developed to investigate the capability of IOLs to release drugs at therapeutic concentrations.

Methods

Models were generated using COMSOL Multiphysics. Primary open-angle glaucoma (POAG) and wet age-related macular degeneration (AMD) were simulated by reducing aqueous vein and choroidal blood flow, respectively. Release of dexamethasone, ganciclovir, or dextran was studied using common IOL materials, polydimethylsiloxane (PDMS) and poly(2-hydroxyethyl methacrylate) (PHEMA).

Results

Drug clearance proceeds mainly through choroidal blood flow. When fully constricted, maximum concentration at the choroid (Cmax) values increased by 32.4% to 39,800%. Compared to dexamethasone, Cmax in different tissues decreased by 6.07% to 96.0% for ganciclovir and dextran, and clearance rates decreased by 16% to 69% for ganciclovir and by 92% to 100% for dextran. Using PDMS as the IOL reduced clearance rates by 91.3% to 94.6% compared to PHEMA.

Conclusions

In diseased eyes, drugs accumulate mainly in posterior tissue; thus, choroidal drug toxicity must be assessed prior to IOL implantation in POAG and AMD patients. Moreover, drug properties modulated concentration profiles in all ocular segments. The hydrophobic small-molecule dexamethasone attained the highest concentrations and cleared the fastest, whereas hydrophilic macromolecular dextran attained the lowest concentrations and cleared the slowest. Furthermore, high concentrations were achieved quickly following release from PHEMA, whereas PDMS allowed for sustained release.

Translational Relevance

In silico results can guide scientists and clinicians regarding important physiological and chemical factors that modulate tissue drug concentrations from drug-eluting IOLs.

3D Printing of Antibacterial Polymer Devices Based on Nitric Oxide Release from Embedded S-Nitrosothiol Crystals

Controlled release of drugs from medical implants is an effective approach to reducing foreign body reactions and infections. We report here on a one-step 3D printing strategy to create drug-eluting polymer devices with a drug-loaded bulk and a drug-free coating. The spontaneously formed drug-free coating dramatically reduces the surface roughness of the implantable devices and serves as a protective layer to suppress the burst release of drugs. A high viscosity liquid silicone that can be extruded based on its shear-thinning property and quickly vulcanize upon exposure to ambient moisture is used as the ink for 3D printing. S-Nitrosothiol type nitric oxide (NO) donors in their crystalline forms are selected as model drugs because of the potent antimicrobial, antithrombotic, and anti-inflammatory properties of NO. Direct ink writing of the homogenized polymer-drug mixtures generates rough and ill-defined device surfaces because of the exposed S-nitrosothiol microparticles. When a low-viscosity silicone (polydimethylsiloxane) is added into the ink, this silicone diffuses outward upon deposition to form a drug-free outermost layer without compromising the integrity of the printed structures. S-Nitrosoglutathione (GSNO) or S-nitroso-N-acetylpenicillamine (SNAP) embedded in the printed silicone matrix releases NO under physiological conditions from days to about one month. The microsized drug crystals are well-preserved in the ink preparation and printing processes, which is one reason for the sustained NO release. Biofilm and cytotoxicity experiments confirmed the antibacterial property and safety of the printed NO-releasing devices. This additive manufacturing platform does not require dissolution of drugs and involves no thermal or UV processes and, therefore, offers unique opportunities to produce drug-eluting silicone devices in a customized manner.

Asymmetry in Drug Permeability through the Cornea

The permeability through the cornea determines the ability of a drug or any topically applied compound to cross the tissue and reach the intraocular area. Most of the permeability values found in the literature are obtained considering topical drug formulations, and therefore, refer to the drug permeability inward the eye. However, due to the asymmetry of the corneal tissue, outward drug permeability constitutes a more meaningful parameter when dealing with intraocular drug-delivery systems (i.e., drug-loaded intraocular lenses, intraocular implants or injections). Herein, the permeability coefficients of two commonly administered anti-inflammatory drugs (i.e., bromfenac sodium and dexamethasone sodium) were determined ex vivo using Franz diffusion cells and porcine corneas in both inward and outward configurations. A significantly higher drug accumulation in the cornea was detected in the outward direction, which is consistent with the different characteristics of the corneal layers. Coherently, a higher permeability coefficient was obtained for bromfenac sodium in the outward direction, but no differences were detected for dexamethasone sodium in the two directions. Drug accumulation in the cornea can prolong the therapeutic effect of intraocular drug-release systems.

Intraocular lenses as drug delivery devices

Cataract surgery is one of the most common and safe surgical procedures nowadays. However, it is not free of risks as endophthalmitis, ocular inflammation and posterior capsule opacification (PCO) can appear as post-surgery complications. The usual eye drop therapy used as prophylaxis for the former two complications has limited bioavailability. In turn, the prevention of PCO involves an adequate surgical technique and a careful choice of intraocular lens (IOL) design and material. Also, different drugs have been tested to reduce incidence of PCO, but no prophylaxis demonstrated to be completely effective. In the past few years, IOLs have been proposed as drug delivery devices to replace or/assist the usual eye drop therapy in the post-operatory period. The great advantage of drug loaded IOLs would be to ensure a continuous drug delivery, independent of patient's compliance without requiring any further action besides IOL implantation. The biggest challenge of drug loaded IOLs production is to achieve a controlled and extended release that meet therapeutic needs without inducing toxicity to the surrounding ocular tissues or affecting the physical properties of the lens. This review starts by addressing the possible complications after cataract surgery, as well as the most commonly adopted prophylaxis for each of them. The various types of IOLs are described and their main advantages/disadvantages are discussed. The different strategies pursued to incorporate drugs into the IOLs and control their release, which include soaking the IOL in the drugs solution, supercritical impregnation, surface modifications, and attachment of drug reservoirs to the IOL, among others, are reported. For each strategy, a summary of the publications is presented, which includes the target complication, the types and amounts of released drugs and the IOL materials. A brief description of each individual study is given afterwards. Optimization of drug loaded IOLs through mathematical modelling and possible issues raised by their sterilization are also tackled. At the end, the future commercialization of drug loaded IOLs is commented.

Fouling in ocular devices: implications for drug delivery, bioactive surface immobilization, and biomaterial design

The last 30 years has seen a proliferation of research on protein-resistant biomaterials targeted at designing bio-inert surfaces, which are prerequisite for optimal performance of implantable devices that contact biological fluids and tissues. These efforts have only been able to yield minimal results, and hence, the ideal anti-fouling biomaterial has remained elusive. Some studies have yielded biomaterials with a reduced fouling index among which high molecular weight polyethylene glycols have remained dominant. Interestingly, the field of implantable ocular devices has not experienced an outflow of research in this area, possibly due to the assumption that biomaterials tested in other body fluids can be translated for application in the ocular space. Unfortunately, progression in the molecular understanding of many ocular conditions has brought to the fore the need for treatment options that necessitates the use of anti-fouling biomaterials. From the earliest implanted horsehair and silk seton for glaucoma drainage to the recent mini telescopes for sight recovery, this review provides a concise incursion into the gradual evolution of biomaterials for the design of implantable ocular devices as well as approaches used to overcome the challenges with fouling. The implication of fouling for drug delivery, the design of immune-responsive biomaterials, as well as advanced surface immobilization approaches to support the overall performance of implantable ocular devices are also reviewed.

Moxifloxacin-loaded acrylic intraocular lenses: In vitro and in vivo performance

PURPOSE

To assess the possibility of using acrylic intraocular lenses (IOLs) to ensure controlled and sustained release of moxifloxacin, an antibiotic commonly used for endophthalmitis prophylaxis after cataract surgery.

SETTING

Academic, industrial, and clinical partners from Portugal, Belgium, Iceland, and the United States.

DESIGN

Experimental study.

METHODS

The physical properties of IOLs loaded with moxifloxacin by soaking were characterized. In vitro drug-release studies were performed under hydrodynamic conditions similar to those of the eye, and the activity of the released drug was tested. In vitro cytotoxicity was evaluated, and the in vivo efficacy of the devices was assessed through rabbit experiments in which the effects of topical moxifloxacin drops (control) and moxifloxacin-loaded IOLs were compared.

RESULTS

The presence of moxifloxacin in the IOLs had little effect on the evaluated physical properties and did not induce cytotoxicity. In vitro drug release experiments showed that the IOLs provided controlled release of moxifloxacin for approximately 2 weeks. The drug remained active against the tested microorganisms during that period. Moxifloxacin-loaded IOLs and the control treatment induced similar in vivo behavior in terms of inflammatory reactions, capsular bag opacification scores, and uveal and capsule biocompatibility. The drug concentration in the aqueous humor after 1 week was similar in both groups; however, the concentration with the loaded IOLs was less variable.

CONCLUSION

The moxifloxacin-loaded IOLs released the drug in a controlled manner, providing therapeutic levels.

Therapeutic Ophthalmic Lenses: A Review

An increasing incidence of eye diseases has been registered in the last decades in developed countries due to the ageing of population, changes in lifestyle, environmental factors, and the presence of concomitant medical conditions. The increase of public awareness on ocular conditions leads to an early diagnosis and treatment, as well as an increased demand for more effective and minimally invasive solutions for the treatment of both the anterior and posterior segments of the eye. Despite being the most common route of ophthalmic drug administration, eye drops are associated with compliance issues, drug wastage by lacrimation, and low bioavailability due to the ocular barriers. In order to overcome these problems, the design of drug-eluting ophthalmic lenses constitutes a non-invasive and patient-friendly approach for the sustained drug delivery to the eye. Several examples of therapeutic contact lenses and intraocular lenses have been developed, by means of different strategies of drug loading, leading to promising results. This review aims to report the recent advances in the development of therapeutic ophthalmic lenses for the treatment and/or prophylaxis of eye pathologies (i.e., glaucoma, cataract, corneal diseases, or posterior segment diseases) and it gives an overview of the future perspectives and challenges in the field.

A Critical Appraisal of New Developments in Intraocular Lens Modifications and Drug Delivery Systems for the Prevention of Cataract Surgery Complications

Cataract surgery is the commonest ophthalmic surgery worldwide. The replacement of the diseased lens with a synthetic one (intraocular lens-IOL) remains the treatment of choice, despite its potential complications that include infection, inflammation and posterior capsule opacification. The potential for drug delivery via the IOL has been researched extensively over a period of twenty-five years, yet there is very limited progress in transferring the findings from research to everyday practice. The objective of this review is to assess the progress made in the field of IOL lens modifications and drug delivery systems over the past five years. Thirty-six studies that were conducted during the past five years were identified and deemed suitable for inclusion. They were grouped in three broad categories, studies that described new methods for loading a drug onto the IOL, assessment of the effects of drugs that were loaded to the IOL and studies that assessed the effects of non-pharmaceutical modifications of IOLs. While considerable progress is continually being made with regard to methods and materials, there is still little capitalization upon these research studies, with no commercially available IOL-based drug delivery system being available. Close cooperation between researchers in basic sciences (chemistry, physics, materials science and pharmacy), clinical researchers, IOL manufacturers and the pharmaceutical industry is an important prerequisite for further development.

Multi-region finite element modelling of drug release from hydrogel based ophthalmic lenses

Understanding the way in which drug is released from drug carrying hydrogel based ophthalmic lenses aids in the development of efficient ophthalmic drug delivery. Various solute-polymer interactions affect solute diffusion within hydrogels as well as hydrogel-bulk partitioning. Additionally, surface modifications or coatings may add to resistance of mass transfer across the hydrogel interface. It is necessary to consider both interfacial resistances as well as the appropriate driving force when characterizing interface flux. Such a driving force is induced by a difference in concentration which deviates from equilibrium conditions. We present a Galerkin finite element approach for solute transport in hydrogels which accounts for diffusion within the gel, storage effects due to polymer-solute interaction, as well as partitioning and mass transfer resistance effects at the interface. The approach is formulated using a rotational symmetric model to account for realistic geometry. We show that although the resulting global system is not symmetric in the case of partitioning, it is similar to a symmetric negative semidefinite system. Thus, it has non-positive real eigenvalues and is coercive, ensuring the validity of the finite element formulation as well as the numerical stability of the implicit backward Euler time integration method employed. Two models demonstrating this approach are presented and verified with release experimental data. The first is the release of moxifloxacin from intraocular lenses (IOLs) plasma grafted with different polyacrylates. The second accounts for both loading as well as the release of diclofenac from disc shaped IOL material loaded for varied time periods and temperature.

Biosafety of a 3D-printed intraocular lens made of a poly(acrylamide-co-sodium acrylate) hydrogel in vitro and in vivo

AIM

To assess the biosafety of a poly(acrylamide-co-sodium acrylate) hydrogel (PAH) as a 3D-printed intraocular lens (IOL) material.

METHODS

The biosafety of PAH was first evaluated in vitro using human lens epithelial cells (LECs) and the ARPE19 cell line, and a cell counting kit-8 (CCK-8) assay was performed to investigate alterations in cell proliferation. A thin film of PAH and a conventional IOL were intraocularly implanted into the eyes of New Zealand white rabbits respectively, and a sham surgery served as control group. The anterior segment photographs, intraocular pressure (IOP), blood parameters and electroretinograms (ERG) were recorded. Inflammatory cytokines in the aqueous humor, such as TNFα and IL-8, were examined by ELISA. Cell apoptosis of the retina was investigated by TUNEL assay, and macroPAHge activation was detected by immunostaining.

RESULTS

PAH did not slow cell proliferation when cocultured with human LECs or ARPE19 cells. The implantation of a thin film of a 3D-printed IOL composed of PAH did not affect the IOP, blood parameters, ERG or optical structure in any of the three experimental groups (n=3 for each). Both TNFα and IL-8 in the aqueous humor of PAH group were transiently elevated 1wk post-operation and recovered to normal levels at 1 and 3mo post-operation. Iba1⁺ macroPAHges in the anterior chamber angle in PAH group were increased markedly compared to those of the control group; however, there was no significant difference compared to those in the IOL group.

CONCLUSION

PAH is a safe material for 3D printing of personal IOLs that hold great potential for future clinical applications.

Drug-loaded and Blue-ray Filtered Hydrogel as a Potential Intraocular Lens for Cataract Treatment

Background:

Indomethacin (IND) is a class of non-steroidal, anti-inflammatory drugs, which is used to treat various kinds of ocular inflammation, and has been reported to prevent posterior capsule opacification (PCO) by inhibiting the mitosis and collagen synthesis of human lens epithelial cells (LECs). In addition, the specific absorption spectrum of indomethacin shows the effect of absorbing short-wavelength blue-violet light.

Objective:

We prepared an indomethacin-loaded hydrogel as a potential intraocular lens (IOLs) material to prevent endophthalmitis, PCO and filter harmful blue light.

Methods:

Indomethacin prodrugs (HEMA-IND) (HI) were prepared by esterification of indomethacin and 2-hydroxyethyl methacrylate (HEMA), and poly (HEMA-co-MAA-co-MMA-co- HI) (HAMI) hydrogels were prepared by free-radical polymerization of 2-hydroxyethyl methacrylate (HEMA), methyl methacrylate (MMA), methacrylic acid (MAA) and HI. The physical and chemical properties of obtained hydrogel were detected, including optical, morphology, thermomechanical and surface properties, equilibrium water content, drug release behaviors and cytotoxicity.

Results:

HAMI hydrogels can filter harmful short-wavelength blue light and show other necessary properties like visible light transparency, glass transition temperatures, mechanical strength, and biocompatibility for making intraocular lenses. Meanwhile, MAA increases the hydrophilicity of the hydrogels, resulting in a lower water contact angle and controllable drug release from the hydrogels.

Conclusion:

In summary, HAMI hydrogels show a great potential as IOL biomaterials that can maintain the sustained release of indomethacin and filter harmful blue light after cataract surgery.

Lay Summary:

People with cataract surgery can be at high risk of postoperative complications, such as PCO and postoperative endophthalmitis. Moreover, early IOLs allowed all ultraviolet (UV) and visible light to pass through retina without restriction, thus to damage the retina and the retinal pigment epithelium, which may lead to retinopathy and age-related macular degeneration (AMD). Herein, we sought to design and prepare a kind of IOLs loaded with indomethacin to mitigate those postoperative complications and filter harmful blue light to improve the treatment prognosis.

A self-healable and antifouling hydrogel based on PDMS centered ABA tri-block copolymer polymersomes: a potential material for therapeutic contact lenses

We have prepared an antifouling and self-healable PDMS based hydrogel which consists of a mixture of curcumin loaded zwitterionic PDMS polymersomes and amine functionalized PDMS polymersomes prepared via RAFT polymerization and Schiff-base reaction.

Cyclodextrin-containing hydrogels as an intraocular lens for sustained drug release

To improve the efficacy of anti-inflammatory factors in patients who undergo cataract surgery, poly(2-hydroxyethyl methacrylate-co-methyl methacrylate) (p(HEMA-co-MMA)) hydrogels containing β-cyclodextrin (β-CD) (pHEMA/MMA/β-CD) were designed and prepared as intraocular lens (IOLs) biomaterials that could be loaded with and achieve the sustained release of dexamethasone. A series of pHEMA/MMA/β-CD copolymers containing different ratios of β-CD (range, 2.77 to 10.24 wt.%) were obtained using thermal polymerization. The polymers had high transmittance at visible wavelengths and good biocompatibility with mouse connective tissue fibroblasts. Drug loading and release studies demonstrated that introducing β-CD into hydrogels increased loading efficiency and achieved the sustained release of the drug. Administering β-CD via hydrogels increased the equilibrium swelling ratio, elastic modulus and tensile strength. In addition, β-CD increased the hydrophilicity of the hydrogels, resulting in a lower water contact angle and higher cellular adhesion to the hydrogels. In summary, pHEMA/MMA/β-CD hydrogels show great potential as IOL biomaterials that are capable of maintaining the sustained release of anti-inflammatory drugs after cataract surgery.

Intra-ocular lens optical changes resulting from the loading of dexamethasone

To study the optical changes on hydrogel-silicone intraocular lenses (IOLs) resulting from loading them with dexamethasone. We used prototype hydrogel(pHEMA)-silicone IOLs and loaded the matrices with an anti-inflammatory drug (dexamethasone). The optical properties we analyzed experimentally were a) modulation transfer function (MTF); b) spectral transmission; c) diopter power. These determinations were performed on drug-loaded IOLs, IOLs that had released the drug, and IOLs that had not been drug-loaded. Loading a hydrogel-silicone IOL with dexamethasone results in impairment of its optical qualities, in particular its MTF and spectral transmission, but not dioptric power. However, once the drug has been released, it almost recovers its initial optical properties.

Cataracts

An estimated 95 million people worldwide are affected by cataract. Cataract still remains the leading cause of blindness in middle-income and low-income countries. With the advancement of surgical technology and techniques, cataract surgery has evolved to small-incisional surgery with rapid visual recovery, good visual outcomes, and minimal complications in most patients. With the development of advanced technology in intraocular lenses, the combined treatment of cataract and astigmatism or presbyopia, or both, is possible. Paediatric cataracts have a different pathogenesis, surgical concerns, and postoperative clinical course from those of age-related cataracts, and the visual outcome is multifactorial and dependent on postoperative visual rehabilitation. New developments in cataract surgery will continue to improve the visual, anatomical, and patient-reported outcomes. Future work should focus on promoting the accessibility and quality of cataract surgery in developing countries.

Physicochemical and surface properties of acrylic intraocular lenses and their clinical significance

To analyze and compare several commercially available acrylic intraocular lenses (IOLs) with particular regard to their clinical significance, we examined the physicochemical and surface properties of four currently available acrylic IOLs using static water contact angle, atomic force microscopy (AFM), Raman spectroscopy, and differential scanning calorimetry (DSC) measurements. The hydrophobic acrylic IOLs, ZA9003, and MA60BM, had contact angles ranging from 77.9° ± 0.65° to 84.4° ± 0.09°. The contact angles in the hydrophilic acrylic (970C) and heparin-surface-modified (HSM) hydrophilic acrylic IOLs (BioVue) were 61.8° ± 0.45° and 69.7° ± 0.76°, respectively. The roughness of the IOL optic surface differed depending on the type of IOL (p < 0.001). The surface roughness of BioVue had the lowest value: 5.87 ± 1.26 nm. This suggests that the BioVue IOL may lead to reduced cellular adhesion compared to the unmodified IOLs. All IOLs including those composed of acrylic optic materials from different manufacturers showed distinct Raman spectra peaks. The glass transition temperatures (T_g) for the hydrophobic acrylic IOLs were between 12.5 and 13.8 °C. These results suggest that the intraoperative and postoperative behavior of an IOL can be predicted. This information is also expected to contribute greatly to the industrial production of reliable biocompatible IOLs.

Nanotechnology for the Prevention and Treatment of Cataract

PURPOSE

The purpose of this article was to review recent advances in the applications of nanotechnology in cataract treatment and prevention strategies.

DESIGN

A literature review on the use of nanotechnology for the prevention and treatment of cataract was done.

METHODS

Research articles about nanotechnology-based treatments and prevention technologies for cataract were searched on Web of Science, and the most recent advances were reported.

RESULTS

Nonsteroid anti-inflammatory drugs, natural antioxidants, biologic and chemical chaperones, and chaperones such as molecules have found great application in preventing and treating cataracts. Current scientific research on new treatment strategies, which focuses on the biochemical basis of the disease, will likely result in new anticataract agents. However, none of the drug formulations will be approved for use unless efficient delivery is promised. Nanoparticle engineering together with biomimetic strategies enable the development of next-generation, more efficient, less complex, and personalized treatments.

CONCLUSIONS

The only currently available treatment for cataracts, surgical replacement of the opacified lens, is not an easily accessible option in developing countries. New treatment strategies based on topical drugs would enable treatment to reach massive populations facing the threat of blindness and more effectively deal with the postsurgical complications. Nanotechnology plays a key role in improving drug delivery systems with enhanced controlled release, targeted delivery, and bioavailability to overcome diffusion limitations in the eye.

Avaliação histopatológica da cápsula posterior associada ao implante de lente intraocular com superfície modificada com plasma de flúor e polietilenoglicol em coelhos

RESUMOO objetivo deste estudo foi avaliar o efeito do tratamento da superfície de lentes intraoculares acrílicas utilizando-se plasma de flúor ou polietilenoglicol na prevenção da opacidade de cápsula posterior. Foram analisados 40 olhos de coelhos, submetidos à cirurgia de facoemulsificação e distribuídos em quatro grupos experimentais (n=10), sendo estes: grupo controle, coelhos sem implante de lente intraocular; grupo com lente intraocular tratada com plasma de polietilenoglicol; grupo com lente intraocular tratada com plasma de flúor; e grupo com lente intraocular comercial. As cápsulas posteriores das lentes dos grupos foram avaliadas por meio de análise histopatológica (morfometria e imuno-histoquímica). Os grupos com lente intraocular tratada com polietilenoglicol e com lente intraocular comercial apresentaram menor espessura da cápsula posterior na avaliação inicial (12 semanas) em relação ao grupo controle. No período final de avaliação (6 meses), os tratamentos da superfície da lente intraocular à base de plasma de flúor e polietilenoglicol não reduziram o desenvolvimento das alterações histológicas associadas à opacidade de cápsula posterior. O tratamento das superfícies das lentes intraoculares com plasma de flúor e polietilenoglicol pode ser realizado como adjuvante na prevenção da opacidade de cápsula posterior, pois não causa alterações na morfologia da lente após facoemulsificação.

Attenuation of human lens epithelial cell spreading, migration and contraction via downregulation of the PI3K/Akt pathway

BACKGROUND

Posterior capsule opacification (PCO) represents a major challenge in the postoperative management of cataract patients. Spreading, migration and contraction of residual human lens epithelial cells play a pivotal role in the pathogenesis of PCO. Therefore, we analyzed the effect of the alkylphosphocholine (APC) erufosine on these cellular features as well as on PI3K/Akt, a crucial pathway in PCO pathogenesis.

METHODS

Human lens epithelial cells were cultured under standard cell culture conditions. Cell spreading was analyzed on fibronectin-coated wells and chemokinetic migration was assessed by time-lapse microscopy. For evaluation of cell-mediated collagen matrix contraction, the cells were seeded into collagen gels and incubated with an APC in different non-toxic concentrations before the surface area was measured on day 6. The activity of PI3K/Akt was assessed by an ELISA kit after incubation of the cells with different APC concentrations.

RESULTS

Human lens epithelial cell spreading and migration were attenuated by APCs as follows: 7 % spreading, 48 % migration (0.1 μM APC), and 32 % spreading, 68 % migration (1.0 μM APC). APC concentrations of 0.1 μM reduced collagen gel diameter by 5 %, and 1.0 μM by less than 1 %, compared to untreated, cell-populated gels that resulted in a cell diameter contraction of 36 %. PI3K was downregulated in a concentration-dependent manner.

CONCLUSIONS

The crucial cellular features of PCO pathogenesis are attenuated by the APC erufosine via downregulation of the PI3K pathway. Thus, erufosine might become a valuable tool for pharmacologic PCO prophylaxis in the future.

A biodegradable, sustained-released, prednisolone acetate microfilm drug delivery system effectively prolongs corneal allograft survival in the rat keratoplasty model

Frequent and long-term use of topical corticosteroids after corneal transplantation is necessary to prevent graft rejection. However, it relies heavily on patient compliance, and sustained therapeutic drug levels are often not achieved with administration of topical eye drops. A biodegradable drug delivery system with a controlled and sustained drug release may circumvent these limitations. In this study, we investigated the efficacy of a prednisolone acetate (PA)-loaded poly (d,l-lactide-co-ε-caprolactone) (PLC) microfilm drug delivery system on promoting the survival of allogeneic grafts after penetrating keratoplasty (PK) using a rat model. The drug release profiles of the microfilms were characterized (group 1). Subsequently, forty-eight PK were performed in four experimental groups: syngeneic control grafts (group 2), allogeneic control grafts (group 3), allogeneic grafts with subconjunctivally-implanted PA microfilm (group 4), and allogeneic grafts with PA eye drops (group 5; n = 12 in each). PA-loaded microfilm achieved a sustained and steady release at a rate of 0.006-0.009 mg/day, with a consistent aqueous drug concentration of 207-209 ng/ml. The mean survival days was >28 days in group 2, 9.9±0.8 days in group 3, 26.8±2.7 days in group 4, and 26.4±3.4 days in group 5 (P = 0.023 and P = 0.027 compared with group 3). Statistically significant decrease in CD4+, CD163+, CD 25+, and CD54+ cell infiltration was observed in group 4 and group 5 compared with group 3 (P<0.001). There was no significant difference in the mean survival and immunohistochemical analysis between group 4 and group 5. These results showed that sustained PA-loaded microfilm effectively prolongs corneal allograft survival. It is as effective as conventional PA eye drops, providing a promising clinically applicable alternative for patients undergoing corneal transplantation.