Effects of Food Texture on Three-Dimensional Loads on Implants During Mastication Based on In Vivo Measurements

In vivo measurement of three-dimensional load exerted on dental implants: a literature review

Background

For biomechanical consideration of dental implants, an understanding of the three-dimensional (3D) load exerted on the implant is essential, but little information is available on the in vivo load, including the measuring devices.

Purpose

This review aimed to evaluate studies that used specific load-measuring devices that could be mounted on an implant to measure the functional load in vivo.

Materials and methods

An electronic search utilizing the internet research databases PubMed, Google Scholar, and Scopus was performed. The articles were chosen by two authors based on the inclusion and exclusion criteria.

Results

In all, 132 studies were selected from the database search, and 16 were selected from a manual search. Twenty-three studies were finally included in this review after a complete full-text evaluation. Eleven studies were related to the force measurements using the strain gauges, and 12 were related to the piezoelectric force transducer. The principles of the two types of devices were completely different, but the devices produced comparable outcomes. The dynamics of the load magnitude and direction on the implant during function were clarified, although the number of participants in each study was small.

Conclusions

The load exerted on the implant during function was precisely measured in vivo using specific measuring devices, such as strain gauges or piezoelectric force transducers. The in vivo load data enable us to determine the actual biomechanical status in more detail, which might be useful for optimization of the implant prosthetic design and development of related materials. Due to the limited data and difficulty of in vivo measurements, the development of a new, simpler force measurement device and method might be necessary.

The effects of bone remodeling on biomechanical behavior in a patient with an implant-supported overdenture

This study aimed to clarify the effects of bone remodeling on biomechanical behavior in a patient with a mandibular implant-supported overdenture by comparing computed tomography-based finite element analyses (CT-FEA) with two time points of CT data. The present FEA was based on CT data collected from a 62-year-old female subject, who wore a mandibular implant overdenture supported by four dental implants with bar attachment. Two kinds of FE models were constructed from CT data taken at two time points: pre-implantation (Original-model) and 12 years post-implantation (Aged-model). FE models consisted of patient-specific model geometry and heterogeneous material properties. The deviation analysis was carried out to assess the changes in bone mass over a period of 12 years. The results show an averaging of intraosseous stress and strain energy density between the implant regions in the Aged-model. The results of the morphological assessments demonstrated that the bone mass and quality had significantly changed over 12 years. Area-specific bone resorption was also observed at the bone surrounding each implant. The combined findings indicate that the averaging of mechanical variables was due to chronological changes in bone morphology, suggesting adaptation to mechanical loads by peri-implant bone remodeling.

Effect of peri-implant bone resorption on mechanical stress in the implant body: In vivo measured load-based finite element analysis

BACKGROUND

Research on resolving implant fracture is still gaining attention as it can be a serious treatment failure outcome. The implant fracture is likely to occur due to increased stress in implant body associated with peri-implant bone resorption.

OBJECTIVE

This study aimed to investigate the relationship between degree of peri-implant bone resorption and stress distribution in implant body by using finite element analysis (FEA).

METHODS

The magnitude and direction of loads on implants at the mandibular molar region were measured with 3D piezoelectric force transducers in a patient during maximal voluntary clenching, grinding and tapping to obtain input for the FEA as the loading condition. Simplified finite element bone models were generated to simulate the six patterns of peri-implant bone resorption progression which the bone levels from implant platform were set at 0, 1, 2, 3, 4 and 5 mm. Three types of implants with different diameters (3.5, 4.0 and 5.0 mm), corresponding abutments and screws were created. FEA using the in vivo measured load was conducted to investigate how peri-implant bone loss affects stress distribution in the implant body.

RESULTS

Loading condition affected stress distribution in the implant body. As bone resorption increased, von Mises stress in the implant body became larger, which was marked in smaller diameter implants, and this change was amply demonstrated when the bone resorption increased from 0 to 2 mm.

CONCLUSION

The FEA demonstrated that as peri-implant bone loss increased, the magnitude of stress in the implant increased, especially in small diameter implants.