Flow Visualization of A Monoleaflet and Bileaflet Mechanical Heart Valve in A Pneumatic Ventricular Assist Device Using A PIV System

Effect of the bileaflet inlet valve angle on the flow of a pediatric ventricular assist device: experimental analysis

BACKGROUND

Mechanical heart valves (MHV) and its fluid dynamics inside a pulsatile pediatric ventricular assist device (PVAD) can be associated with blood degradation. In this paper, flow structures are analyzed and compared by an experimental investigation on the effect of bileaflet MHV positioned at varying angles in the inlet port orifice of a PVAD.

METHODS

Time-resolved particle image velocimetry (TR-PIV) was applied to characterize the internal flow of the device. St Jude Medical bileaftlet valves were used on the inlet orifice and positioned at 0°, 15°, 30°, 45°, 60°, and 90° in relation to the centerline of the device. Three planes with bidimensional velocity magnitude fields were considered in the analysis with visualization of diastolic jets, device wall washing patterns and flow circulation during emptying or systole of the pump. Also, the washing vortex area, and vertical velocity probabilities of regurgitant flows in the inlet valve were evaluated.

RESULTS

The results show that a variation in the angle of the MHV at the inlet port produced distinct velocities, fluid structures, and regurgitant flow probabilities within the device. MHV positioned at an angle of 0° generated the strongest inlet jet, larger vortex area during filling, more prominent outgoing flow, and less regurgitation compared to the angles studied. The presence of unfavorable fluid structures, such as small vortices, and/or sudden flow structure interruption, and/or regurgitation, were identified at 45° and 90° angles.

CONCLUSIONS

The 0° inlet angle had better outcomes than other angles due to its consistency in the multiple parameters analyzed.

A Novel Technique for Experimental Flow Visualization of Mechanical Valves

The geometry of the hinge region in mechanical heart valves has been postulated to play an important role in the development of thromboembolic events (TEs). This study describes a novel technique developed to visualize washout characteristics in mechanical valve hinge areas. A dairy-based colloidal suspension (DBCS) was used as a high-contrast tracer. It was introduced directly into the hinge-containing sections of two commercially available valves mounted in laser-milled fluidic channels and subsequently washed out at several flow rates. Time-lapse images were analyzed to determine the average washout rate and generate intensity topography maps of the DBCS clearance. As flow increased, washout improved and clearance times were shorter in all cases. Significantly different washout rate time constants were observed between valves, average >40% faster clearance (p < 0.01). The topographic maps revealed that each valve had a characteristic pattern of washout. The technique proved reproducible with a maximum recorded standard error of mean (SEM) of ±3.9. Although the experimental washout dynamics have yet to be correlated with in vivo visualization studies, the methodology may help identify key flow features influencing TEs. This visualization methodology can be a useful tool to help evaluate stagnation zones in new and existing heart valve hinge designs.

The effects of positioning of transcatheter aortic valves on fluid dynamics of the aortic root

Transcatheter aortic valve implantation is a novel treatment for severe aortic valve stenosis. Due to the recent use of this technology and the procedural variability, there is very little data that quantify the hemodynamic consequences of variations in valve placement. Changes in aortic wall stresses and fluid retention in the sinuses of Valsalva can have a significant effect on the clinical response a patient has to the procedure. By comprehensively characterizing complex flow in the sinuses of Valsalva using digital particle image velocimetry and an advanced heart-flow simulator, various positions of a deployed transcatheter valve with respect to a bioprosthetic aortic valve (valve-in-valve) were tested in vitro. Displacements of the transcatheter valve were axial and directed below the simulated native valve annulus. It was determined that for both blood residence time and aortic Reynolds stresses, it is optimal to have the annulus of the transcatheter valve deployed as close to the aortic valve annulus as possible.

Modeling single ventricle physiology: review of engineering tools to study first stage palliation of hypoplastic left heart syndrome

First stage palliation of hypoplastic left heart syndrome, i.e., the Norwood operation, results in a complex physiological arrangement, involving different shunting options (modified Blalock-Taussig, RV-PA conduit, central shunt from the ascending aorta) and enlargement of the hypoplastic ascending aorta. Engineering techniques, both computational and experimental, can aid in the understanding of the Norwood physiology and their correct implementation can potentially lead to refinement of the decision-making process, by means of patient-specific simulations. This paper presents some of the available tools that can corroborate clinical evidence by providing detailed insight into the fluid dynamics of the Norwood circulation as well as alternative surgical scenarios (i.e., virtual surgery). Patient-specific anatomies can be manufactured by means of rapid prototyping and such models can be inserted in experimental set-ups (mock circulatory loops) that can provide a valuable source of validation data as well as hydrodynamic information. Such models can be tuned to respond to differing the patient physiologies. Experimental set-ups can also be compatible with visualization techniques, like particle image velocimetry and cardiovascular magnetic resonance, further adding to the knowledge of the local fluid dynamics. Multi-scale computational models include detailed three-dimensional (3D) anatomical information coupled to a lumped parameter network representing the remainder of the circulation. These models output both overall hemodynamic parameters while also enabling to investigate the local fluid dynamics of the aortic arch or the shunt. As an alternative, pure lumped parameter models can also be employed to model Stage 1 palliation, taking advantage of a much lower computational cost, albeit missing the 3D anatomical component. Finally, analytical techniques, such as wave intensity analysis, can be employed to study the Norwood physiology, providing a mechanistic perspective on the ventriculo-arterial coupling for this specific surgical scenario.